3.96mm Pitch Connector Directly Mounted on Board DF6 Series ■Features 1. Service Efficiency Up Conventional thick cables are directly mounted on the board piece by piece, but connecterization has achieved soldering services in a batch. This product enhances soldering service efficiency. 2. Miniaturization This product achieves miniaturization for thick cables. Mounting height on board : 7.5mm Width : 5.0mm 3. Board Prefixed Mechanism Since the connector is softly press-fitted to the board for insertion, it can be prefixed to the board. Height: 7.5mm ■Applications Secondary power supply units for various equipment width: 4.6mm Prefixed mechanism B129 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF6 Series●3.96mm Pitch Connector Directly Mounted on Board ■Product Specifications AWG 18 : 5A Operating Temperature Range -35 to +85ç (Note 1) Current rating Cable size AWG 20 : 4A Operating Moisture Range 40 to 80% Rating (Note 1) AWG 22 : 3A Storage Temperature Range -10 to +60ç (Note 2) Voltage rating 300V AC Storage Humidity Range 40 to 70% (Note 2) Item Specification Condition 1.Insulation Resistance 1000M ohms min. 500V DC 2.Withstanding voltage No flashover or insulation breakdown. 1500V AC/1 minute 3.Contact Resistance 15m ohms max. 100mA 4.Vibration No damage, cracks, or parts looseness. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5.Humidity (Steady state) No damage, cracks, or parts looseness. 96 hours at temperature of 40ç and humidity of 90% to 95% 6.Temperature Cycle No damage, cracks, or parts looseness. (-55ç: 30 minutes ➝15 to 35ç: 10 minutes➝85ç: 30 minutes➝ 5 to 35ç: 10 minutes ) 5 cycles Flow: 250ç for 10 seconds 7. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: The rated current will be changed according to cable sizes for use. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 4: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for a specific part number shown. ■Material Product Part Material Finish Remarks Crimping Plug Insulator Polyamide White UL94V-0 ________ Crimping Contact for Plug Brass Copper Alley Tin plated ■Ordering Information ●Crimping Plug DF6 - * P - 3.96 C qewrt q Series Name : DF 6 r Contact pitch: 3.96mm w Number of contacts: 1~8, 10 t C: Crimping plug e Connector type P: Plug ●Crimping Contact DF6A - 1822 PCF qw e q Applicable cable type e Packaging type None : Jacket dia. 1.5mm to 2.2mm PCF: Plug contact, reel packaging UL 1007 SC: Plug contact, bag packaging A : Jacket dia. 2.2mm to 2.9mm UL 1015 w Applicable cable size 1822 : AWG#18~#22 B130 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF6 Series●3.96mm Pitch Connector Directly Mounted on Board ■Precrimping Plug Photo: Contact Inserted Part Number CL No. Number of Contacts A B RoHS _____ DF6- 1P-3.96C 546-0001-1 1 4.92 DF6- 2P-3.96C 546-0002-4 2 8.88 3.96 DF6- 3P-3.96C 546-0003-7 3 12.84 7.92 DF6- 4P-3.96C 546-0004-0 4 16.80 11.88 DF6- 5P-3.96C 546-0005-2 5 20.76 15.84 YES Contact View for Insertion DF6- 6P-3.96C 546-0006-5 6 24.72 19.80 DF6- 7P-3.96C 546-0007-8 7 28.68 23.76 DF6- 8P-3.96C 546-0008-0 8 32.64 27.72 DF6-10P-3.96C 546-0011-5 10 40.56 35.64 Note: A packaging quantity is delivered by the bag unit (100 pcs.). ■Crimping Contact ●Slip length DF6-1822PC (F): 2.1mm to 2.6mm DF6A-1822PC (F): 2.3mm to 2.8mm +0.15 ●Applicable through-hole: 1.8 0 Applicable Cable Part Number CL No. Packaging Type Quantity A B C RoHS UL style Jacket dia. AWG size Contact Construct DF6 -1822PCF(05) 546-0009-3-05 Reel 5,000 1007 1.5 to 2.2mm AWG 18 34 cores/0.18mm 10.2 1.5 1.2 DF6 -1822PC(05) 546-0010-2-05 Bag 100 AWG 20 21 cores/0.18mm YES DF6A-1822PCF(05) 546-0013-0-05 Reel 3,000 1015 2.2 to 2.9mm AWG 22 17 cores/0.16mm 10.5 1.7 1.4 DF6A-1822PC(05) 546-0014-3-05 Bag 100 Note 1. The applicable cable conductor is a tin plated and annealed copper wire. Note 2. If other cables are used instead of the applicable cable, contact the Hirose Sales Department. BApplicable Crimping Tools TypeItem Part Number CL No. Applicable Contact ( ) AP105-DF6-1822P 901-4505-9 DF6 -1822PCF 05 Applicator AP105-DF6A-1822P 901-4520-2 DF6A-1822PCF(05) ________ Press unit CM-105 901-0005-4 ( ) DF6 -TA1822HC 550-0174-9 DF6 -1822PC 05 Manual crimping tool DF6A-TA1822HC 550-0222-0 DF6A-1822PC(05) ( )( ) Extraction tool DF-C-PO(A) 550-0170-8 DF6/DF6A-1822PC F 05 Note: If any trouble has been caused due to other tools, which are not designated by Hirose, Hirose never guarantee any products. B131 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF6 Series●3.96mm Pitch Connector Directly Mounted on Board BPrecautions 1.Recommended soldering Flow: 250ç for 3 seconds Manual soldering: 290ç for 2 seconds condition ■After soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding member will be loosened. After soldering, the operation should be performed, after connector returns to room temperature. 2.Cleaning condition Refer to the "Nylon Connector Use Hand book". Don't use solvent to degrade the cable jacket like trichloroethane. In addition, avoid heat cleaning with solvent. 3.Connecting condition Refer to the "Nylon Connector Use Hand book". 4.Precations Slight discoloration on the insulating materials will not affect form, fit or function of the connectors. Refer to "Nylon Connector Use Handbook" B132 Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.