1.25mm Pitch Super Low profile Crimping Connector DF14 Series ■Features 1. Super Low Profile This is a connector special for right angle which has pursued a low profile on the board. Board mounting height : 2.5mm A signal can be fetched from the area where there is no board to Board Mounting Figure board space. (Refer to fig.1) Offset type is available. Board mounting height : 1.6mm (Refer to fig.2) 2. Correspond to Automatic Mounting The header has the vacuum mount face which enables the vacuum absorption and the automatic mounting by the embossed tape packaging.In addition, the tube packaging can be selected. 3. Four Wall Type Without Friction to Board by Socket The header has the box structure to prevent from being twisted and has the perfect mis-insertion prevention method. Moreover the fig.1 header has the wall on the board side and doesn't have any trouble DF14(A) resulted from the friction to board by socket. In addition, the metal fitting is attached to prevent the solder peel. Board Mounting Figure (7.3) ■Applications (1) LCD, Note PC, Mobile Terminal Small business equipment, Video camera DF14H fig.2 B234 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (1.6) (2.4) DF14 Series●1.25mm Pitch Super Low profile Crimping Connector ■Product Specifications Current rating 1A Operating Temperature Range -35 to +85ç (Note 1) Storage Temperature Range -10 to +60ç (Note 2) Rating Voltage rating 150V AC Operating Moisture Range 40 to 80% Storage Moisture Range 40 to 70% (Note 2) Item Specification Condition 1. Insulation Resistance 500Mø Min 100V DC 2. Withstanding voltage No flashover or insulation breakdown. 500V AC/1 minute 3. Contact Resistance 30mø Max 100mA 4. Insertion/Extraction Force MIN0.15N (15gf), MAX3N (300gf) Measure at the square steel pin of 0.3±0.002mm 5. Vibration No electrical discontinuity of 1μs or more Frequency : 10 to 55Hz, single amplitude of 0.75mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance : 30mø Max Insulation resistance : 500Mø Min 96 hours at temperature of 40ç and humidity of 90% to 95% (-25ç : 30 minutes➝5 to 35ç : 10 minutes➝85ç : 30 minutes➝ 7. Temperature Cycle Contact resistance : 30mø Max Insulation resistance : 500Mø Min 5 to 35ç : 10 minutes) 5 cycles Durability (Mating/un-mating) 8. Contact resistance : 30mø Max Tin plating : 30 cycles Gold plating : 50 cycles Reflow : At the recommended temperature profile 9. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering : 300ç for 3 seconds Note 1 : Includes temperature rise caused by current flow. Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material / Finish Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Beige UL94V-0 Crimping Contact for Socket Contact Phosphor Copper Tin-copper plated or gold plated ––––––– Insulator Polyamide Beige UL94V-0 Pin Header Contact Brass Tin-copper plated or gold plated ––––––– Fitting Phosphor copper Tin-copper plated ––––––– ■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. ●Connector DF 14 # - * S - 1.25 C 1 2 3 4 5 6 Series Name : DF14 Connector Type 1 4 Blank : Standard, with boss S : Single row socket 2 A : on-board, without boss P : Single row pin header H : offset Contact Pitch : 1.25mm 5 Number of Contacts : 2 to 10, 15, 20, 25, 30 Contact Type 3 6 C : Crimping socket H : Right angle SMT ●Contact DF14 - 2628 SCF A 1 2 3 Applicable cable size 2 Packaging Type 1 2628 : 26 to 28 AWG SCF : Socket contact/reel 3032 : 30 to 32 AWG Plating Type 3 Blank : Tin plated A : Gold plated B235 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF14 Series●1.25mm Pitch Super Low profile Crimping Connector ■Crimping Socket Photo: Contact insertion state Unit : mm Part No. HRS No. No. of Contacts A B RoHS DF14- 2S-1.25C 538-0005-8 2 4.45 1.25 DF14- 3S-1.25C 538-0006-0 3 5.70 2.50 DF14- 4S-1.25C 538-0007-3 4 6.95 3.75 DF14- 5S-1.25C 538-0008-6 5 8.20 5.00 DF14- 6S-1.25C 538-0009-9 6 9.45 6.25 DF14- 7S-1.25C 538-0010-8 7 10.70 7.50 DF14- 8S-1.25C 538-0011-0 8 11.95 8.75 Yes DF14- 9S-1.25C 538-0013-6 9 13.20 10.00 DF14-10S-1.25C 538-0014-9 10 14.45 11.25 DF14-15S-1.25C 538-0054-3 15 20.70 17.50 DF14-20S-1.25C 538-0059-7 20 26.95 23.75 DF14-25S-1.25C 538-0064-7 25 33.20 30.00 DF14-30S-1.25C 538-0012-3 30 39.45 36.25 Note 1 : The quantity is delivered per bag(100 pcs). If needed, please order the products per bag. ■Socket Crimping Contact Part No. HRS No. Packaging Type Quantity Finish RoHS DF14-2628SCF 538-0001-7 ** Reel Tin plated DF14-3032SCF 538-0003-2 ** Reel 10,000 Yes DF14-2628SCFA 538-0002-0 ** Reel Gold plated DF14-3032SCFA 538-0004-5 ** Reel KApplicable Cable (Tin plating Annealed copper wire) KRecommended Cable Conductor Size (Wire construction) Jacket Diameter UL1571 26 AWG (7 cores/0.16mm) 28 AWG (7 cores/0.127mm) KStrip Length Ø0.54 to Ø1mm 30 AWG (7 cores/0.1mm) 32 AWG (7 cores/0.08mm) 1.2 to 1.9mm Note : If other cables are used instead of the applicable cable, contact Hirose sales department. BApplicable Crimping Tool Type Part No. HRS No. Applicable Contact AP105-DF14-2628S 901-4548-1 DF14-2628SCF/SCFA Applicator AP105-DF14-3032S 901-4544-0 DF14-3032SCF/SCFA Press Main Unit CM-105C 901-0001-0 --------------------------------------------- DF14-2628/CR-HT 550-0261-1 DF14-2628SCF/SCFA Manual Crimping Tool DF14-3032/CR-HT 550-0262-4 DF14-3032SCF/SCFA Note 1 : If a trouble has occurred due to tools, which are not designated by Hirose, Hirose won't guarantee any product. Note 2 : Use the reel contact sequentially cut for manual crimping tool. B236 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF14 Series●1.25mm Pitch Super Low profile Crimping Connector ■Right Angle Pin Header (SMT) Note 1 : "Without boss" indicates the style with no boss. BPCB mounting pattern BTube Packaging Dimensions [Specific No.]–**,(**) (24) : Tin-copper plated tube packaging Note 2 : "Without boss" indicates that no hole is needed. (26) : Tin-copper plated embossed tape packaging (54) : Gold plated tube packaging (56) : Gold plated embossed tape packaging Unit : mm No. Tube With boss Without boss of AB C D Packaging RoHS Part No. HRS No. Part No. HRS No. Contacts Quantity DF14- 2P-1.25H(**) 538-0021-4 ** DF14A- 2P-1.25H(**) 538-0033-3 ** 2 7.45 1.25 6.45 8.05 66 DF14- 3P-1.25H(**) 538-0022-7 ** DF14A- 3P-1.25H(**) 538-0034-6 ** 3 8.70 2.50 7.70 9.30 56 DF14- 4P-1.25H(**) 538-0023-0 ** DF14A- 4P-1.25H(**) 538-0035-9 ** 4 9.95 3.75 8.95 10.55 49 DF14- 5P-1.25H(**) 538-0024-2 ** DF14A- 5P-1.25H(**) 538-0036-1 ** 5 11.20 5.00 10.20 11.80 44 DF14- 6P-1.25H(**) 538-0025-5 ** DF14A- 6P-1.25H(**) 538-0037-4 ** 6 12.45 6.25 11.45 13.05 39 DF14- 7P-1.25H(**) 538-0026-8 ** DF14A- 7P-1.25H(**) 538-0038-7 ** 7 13.70 7.50 12.70 14.30 36 DF14- 8P-1.25H(**) 538-0027-0 ** DF14A- 8P-1.25H(**) 538-0039-0 ** 8 14.95 8.75 13.95 15.55 32 Yes DF14- 9P-1.25H(**) 538-0028-3 ** DF14A- 9P-1.25H(**) 538-0040-9 ** 9 16.20 10.00 15.20 16.80 30 DF14-10P-1.25H(**) 538-0029-6 ** DF14A-10P-1.25H(**) 538-0041-1 ** 10 17.45 11.25 16.45 18.05 28 DF14-15P-1.25H(**) 538-0084-4 ** DF14A-15P-1.25H(**) 538-0114-3 ** 15 23.70 17.50 22.70 24.30 20 DF14-20P-1.25H(**) 538-0089-8 ** DF14A-20P-1.25H(**) 538-0119-7 ** 20 29.95 23.75 28.95 30.55 16 DF14-25P-1.25H(**) 538-0094-8 ** DF14A-25P-1.25H(**) 538-0124-7 ** 25 36.20 30.00 35.20 36.80 13 DF14-30P-1.25H(**) 538-0020-1 ** DF14A-30P-1.25H(**) 538-0045-2 ** 30 42.45 36.25 41.45 43.05 11 Note 1 : Please order the tube packaging product, multiplying the packaging quantity (pcs.). Note 2 : Please order the embossed tape packaging product according to reel number. (1000 pcs./reel) B237 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF14 Series●1.25mm Pitch Super Low profile Crimping Connector ■Right Angle Pin Header (Offset, SMT) A Contact No. 1 P=1.25 0.3 B C BPCB mounting pattern +0.2 (0.5) D 0 A±0.05 P=1.25±0.05 0.7±0.05 [Specific No.]–**,(**) (56) : Gold plated embossed tape packaging +0.2 1.3 0 Unit : mm Part No. HRS No. No. of Contacts A B C D RoHS 1.25 6.8 10.1 7.2 DF14H-02P-1.25H(**) 538-0177-3 ** 2 DF14H-20P-1.25H(**) 538-0167-0 ** 30 23.75 29.3 32.6 29.7 Yes DF14H-30P-1.25H(**) 538-0188-0 ** 30 36.25 41.8 45.1 42.2 Note 1 : Please order the embossed tape packaging product according to reel number. (1000 pcs./reel) B238 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (0.5) 6.7±0.1 1.4±0.1 (0.3) (0.4) 3.6±0.1 2.4 5.7 1.6 0.8 DF14 Series●1.25mm Pitch Super Low profile Crimping Connector BEmbossed Carrier Tape Dimensions (JIS-C-0806) ■ 2 to 10 Contacts ■ 15, 20, 25, 30 Contacts Unit : mm Inserted Connector No. of Contacts A B C D DF14/14A- 2P-1.25H 2 16 7.5 16.4 ––– DF14/14A- 3P-1.25H 3 16 7.5 16.4 ––– DF14/14A- 4P-1.25H 4 24 11.5 24.4 ––– DF14/14A- 5P-1.25H 5 24 11.5 24.4 ––– DF14/14A- 6P-1.25H 6 24 11.5 24.4 ––– DF14/14A- 7P-1.25H 7 24 11.5 24.4 ––– DF14/14A- 8P-1.25H 8 24 11.5 24.4 ––– DF14/14A- 9P-1.25H 9 24 11.5 24.4 ––– DF14/14A-10P-1.25H 10 24 11.5 24.4 ––– DF14/14A-15P-1.25H 15 44 20.2 44.4 40.4 DF14/14A-20P-1.25H 20 44 20.2 44.4 40.4 DF14/14A-25P-1.25H 25 56 26.2 56.4 52.4 DF14/14A-30P-1.25H 30 56 26.2 56.4 52.4 B239 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Ø21±0.8 DF14 Series●1.25mm Pitch Super Low profile Crimping Connector BEmbossed Carrier Tape Dimensions (JIS-C-0806) DF14H-*P- 1.25H ■ 2 Contacts ■ 20, 30 Contacts 2±0.1 2±0.1 (3) 4±0.1 12±0.1 — B B (3) 4±0.1 12±0.1 0.3±0.1 0.3±0.1 B C C B Unreeling direction — C C Unreeling direction 2±0.5 Ø1.5 Lead hole depth A Product name label +2 C 0 (C+6)MAX Unit : mm Inserted Connector No. of Contacts A B C D DF14H- 2P-1.25H 2 24 11.5 24.4 ––– DF14H- 20P-1.25H 20 44 20.2 44.4 40.4 DF14H- 30P-1.25H 30 56 26.2 56.4 52.4 B240 +0.1 Ø1.5 0 +0.1 Ø1.5 0 Ø13±0.5 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. B±0.1 1.75±0.1 A±0.3 Ø330±2 (Ø80) B±0.1 1.75±0.1 D±0.1 A±0.3 DF14 Series●1.25mm Pitch Super Low profile Crimping Connector BPrecautions 1. Recommended Temperature Profile (SMT) Temperature IR reflow condition 10s max. Preheating area 150ç for 60 to 120 seconds 250ç Soldering area 250 for 10 seconds max. Max. 240 220ç min. 60 seconds max. 220 200ç 60s max. Soldering 150ç 60 to 120s Preheating 100ç Time Note 1 : Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2 : The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. 2. Recommended Manual Soldering Condition (SMT) Manual soldering : 290ç for 2 seconds 3. Recommended Screen Thickness (SMT) 0.15 to 0.2mm 4. Board Sled (SMT) Max 0.03mm at the connector center area, based on both connector edges 5. Cleaning Condition Refer to Wire-to-Board Use Hand book. 6. Connection Condition Refer to Wire-to-Board Use Hand book. ■Be careful to carry out the crimping operation according to the "Crimping Condition Sheet" and "Crimping Quality Reference", because the crimping contact style is too small. 7. Precautions Refer to Wire-to-Board Use Hand book. 8. Cautions ■Be careful for an excessive scoop insertion/extraction, which will cause damage to the product. BPrecautions ❮Precautions at Time of Insertion❯❮Precautions at Time of Disconnection❯ Handling Handling Method : Lightly grasping the base of the cable, press the Method : Grasp the cable so that the entire cable is pulled connector with your finger and insert it. evenly and pull it out. Insertion Angle Angle of Removal [Caution] Do not insert at an angle of 30° or greater. Doing so [Caution] Do not remove at an angle of 30° or greater. Doing so will cause contact deformation or case damage. will cause contact deformation or case damage. Method : Insert with the connector parallel. Method : Remove with the connector parallel. Parallel Diagonal Parallel Diagonal Parallel Diagonal Parallel Diagonal B241 Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.