1mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF20 series 5.4 Socket Cable DF20A- **DS-1C DF20F(G)- **DP-1V(56) Pin Header PCB DF20A- DF20F **DS-1C 6.2 **DP-1H(59) Socket Pin Header Cable PCB ■Features Narrower external width and length 1. Contact Pitch 1mm contact pitch allows reliable solder and cable termination. 2. Reliable electrical connection wipe Effective electrical connection is assured with a 1mm wipe of mating contacts. 3. Narrower external width and length Redesigned metal fittings decreased the overall length of the board- mount receptacle and permit end-to-end mounting of several connectors. 4. Automatic equipment board placement Straight type pin headers are supplied with a 5.4mm X 4.6mm flat platform to allow vacuum pick-up and placement on the Metal fitting board. 5. Product variations (1) Available with 10, 20, 30, 40, and 50 contacts. (2) Pin headers are available in two types : with or without board positioning bosses. (3) Depending on specific application pin headers can be ordered in straight or right angle types. DF20F-****SCFA Contact DF20A-**DS-1C ■Applications Socket Notebook PC, small office automation equipment, small consumer devices, portable devices. Any application requiring low profile reliable board-to-cable DF20F(G)-**DP-1V(56) connection with a 28 AWG, 30 AWG, 32 AWG conductors. Pin Header 1mm Pitch, Double Rows B266 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1 5.8 5.5 DF20 Series●1mm Pitch Double Rows Low Profile Wire-to-Board Connectors ■Product Specifications 28 AWG : 1A Rated current Operating temperature range -35°C to 85°C (Note 1,2) Storage temperature range -10°C to 60°C (Note 2) 30 AWG : 0.9A Rating 32 AWG : 0.7A Rated voltage Operating humidity range -40% to 80% Storage humidity range -40% to 70% 100V AC Item Specifications Conditions 1.Insulation resistance 500Mø min. Measured at 100V DC 2.Withstanding voltage No flashover or insulation breakdown Conduction of 300V AC applied for 1 minute 3.Contact resistance 30Mø max. Measure at 100mA. 4.Insertion-Extraction force Measured with a steel pin of 0.2 ±0.005 thickness 0.2 N Min., 2 N Max. (per contact) 4. 5.Vibration No electrical discontinuity of 1µs min. Frequency of 10 to 55 Hz, single amplitude of 0.75 mm, in 3 directions for 2hours 6.Humidity Contact resistance of 30mø max., insulation resistance of 100Mø min. Temperature of 40±2ç, humidity of 90% to 95%, left standing for 96 hours 7.Temperature cycle Contact resistance of 30mø max,insulation resistance of 500Mø min. (-55ç : 30min / 5ç to 35ç : 2 to 3min / 85ç : 30min / 5ç to 35ç : 2 to 3min ) for 5 cycles 8.Mechanical operation Contact resistance of 30mø max. 50 cycles 9. Resistance to Reflow : At the recommended temperature profile, manual No deformation of the insulator parts that will Soldering heat affect performance solder : Soldering iron temperature of 300°C for 3 seconds Note1 : Includes temperature rise caused by current flow. Note2 : The term “storage” refers to products stored for long periods of time prior to mounting and use. Note2 : Operating temperature range and Humidity range covers non-conducting conditions of installed connectors in storage, Note2 : shipment or transportation. Note3 : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. ■Materials / Finish Item Part Material Finish Remarks Socket Insulator Polyamide Color : Beige UL94V-0 Socket contact Contact Phosphor bronze Gold plating ---------- Insulator Polyamide Color : Beige UL94V-0 Pin header Contact Phosphor bronze Gold plating ---------- Metal Fitting Brass Tin-Copper plating ---------- ■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. ●Connectors DF20 # - * DS - 1 C 1 2 3 4 5 6 1 Series name : DF20 4 Connector type 2 Boss Type DS: Double-row socket ■Pin header DP: Double-row pin header ■ F : Without boss 5 Contact pitch: 1 mm ■G : With boss 6 Type of housing, header ■Crimp socket: A 7 C: Crimp housing 3 Number of contacts : 10, 20, 30, 40, 50 V: Straight SMT header H: Right angle SMT header ●Contacts DF20 F - 2830 SCF A ( ** ) 1 2 3 4 2 F Contact & packaging type 4 Packaging Specifications 1 Applicable wire size SCF : Socket contact reel 04 : 1 reel = 10,000 pieces 2830 : 28 to 30 AWG 3 Plating type 44 : 1 reel = 20,000 pieces 3032 : 30 to 32 AWG A : Gold plating B267 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF20 Series●1mm Pitch Double Rows Low Profile Wire-to-Board Connectors ■Double Row Socket A B P=1 Contact No. * Contact No. 2 Contact No. * Contact No. 1 5th contact marking 5 4.28 Shown with terminated and installed contacts Contact No. 1 mark Unit : mm Part No. HRS No. No. of Contacts A B RoHS [Specifications number]-*, (**) Blank : Bag packaging (100 pcs / pack) DF20A-10DS-1C 686-0020-3 10 17.2 14.0 DF20A-20DS-1C 686-0021-6 20 12.2 19.0 DF20A-30DS-1C 686-0022-9 30 17.2 14.0 YES DF20A-40DS-1C 686-0023-1 40 22.2 19.0 DF20A-50DS-1C 686-0024-4 50 27.2 24.0 Note : Sales quantities are by the package unit (containing 100 pieces). Please order by package unit. ■Socket Crimp Contacts Part No. HRS No. Type of contacts Quantity Plating type RoHS ( ) DF20F-2830SCFA ** 686-0042-6 ** ( ) DF20F-3032SCFA ** 686-0043-9 ** Reel contacts See specifications number column Gold plating YES ( ) ( ) DF20F-36SCFA ** Note 2 686-0051-7 ** [Specifications number] -*, (**) 1.45 0.7 (04) : 10,000 pcs / reel (44) : 20,000 pcs / reel ●Applicable Wire (Tin plated solid soft conductor) Applicable Wire Size (Stranded wire conductor) Jacket diameter 28 AWG (7/0.127mm) 30 AWG (7/0.1mm) 0.5 to 0.6mm 32 AWG (7/0.08mm) ●Recommended wire ●Strip length ●UL1571(thin type) ( ) ●1.2 to 1.9mm Note 2 Note 1 : When using other than the recommended wire, contact your nearest Hirose representative. Note 2 : Contact your Hirose sales representative when using 36 AWG. ●Applicable Crimping Tools Type HRS No. Part No. Applicable contact DF20F-2830SCFA(**) Applicator 901-4572-6 AP105-DF20-2830S DF20F-3032SCFA(**) Press 901-0001-0 CM-105C ---- Note 1 : Hirose Electric will not be responsible for any ■Replacement Parts List for Applicator problems caused by use of tools other than specified. Type Part No. HRS No. Note 2 : Please conduct crimping work according to the "Crimping work standards" and "Crimp condition Insulation crimper AP105-DF20-2830S(61) 901-4572-6 61 table". Wire crimper AP105-DF20-2830S(62) 901-4572-6 62 Insulation anvil and wire anvil AP105-DF20-2830S(63) 901-4572-6 63 B268 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 4.1 3.3 2 0.5 0.9 A +0.1 Ø0.7 0 DF20 Series●1mm Pitch Double Rows Low Profile Wire-to-Board Connectors ■ Double Row Straight Pin header B Contact No.3 A P=1 Contact No. **-1 Contact No.1 Indication of number of contacts Contact No. ** 6.4 Contact No.2 0.2 5.4 Ø0.5 1.9 D C 0.2 BPCB Footprints A ±0.05 P=1±0.03 0.9±0.05 0.85±0.1 Contact No. 1 marking 0.6±0.05 D±0.05 Note 1 : Shaded area must be free of any electrically conductive traces to avoid contact with soldered pin header terminations. Note 2 : Required only for pin headers supplied with the positioning boss. Unit : mm Part No. HRS No. No. of contacts A B C D Remarks RoHS DF20F -10DP-1V(56) 686-0032-2 56 10 14.0 17.3 16.6 ---- DF20F -20DP-1V(56) 686-0033-5 56 20 19.0 12.3 11.6 ---- DF20F -30DP-1V(56) 686-0034-8 56 30 14.0 17.3 16.6 ---- Without boss DF20F -40DP-1V(56) 686-0035-0 56 40 19.0 22.3 21.6 ---- DF20F -50DP-1V(56) 686-0036-3 56 50 24.0 27.3 26.6 ---- YES DF20G-10DP-1V(56) 686-0037-6 56 10 14.0 17.3 16.6 15.7 DF20G-20DP-1V(56) 686-0038-9 56 20 19.0 12.3 11.6 10.7 DF20G-30DP-1V(56) 686-0039-1 56 30 14.0 17.3 16.6 15.7 With boss DF20G-40DP-1V(56) 686-0040-0 56 40 19.0 22.3 21.6 20.7 DF20G-50DP-1V(56) 686-0041-3 56 50 24.0 27.3 26.6 25.7 Note 1 : Order embossed tape packaging items by the reel. (1 reel contains 1,000 pieces) [Specifications number]-*, (**) (56) : Gold plating, embossed tape Note 2 : Vacuum pick-up cap are included with embossed tape packaged connectors. packaging B269 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1.8±0.1 1.9±0.05 0.5±0.05 4±0.1 7.2±0.1 0.7 4.6 DF20 Series●1mm Pitch Double Rows Low Profile Wire-to-Board Connectors ■Double Row Right angle Pin header Contact No.1 Contact No.3 Contact No.**-1 Contact No.1 marking Contact No.** Contact No.2 B 5 Indication of number of contacts A P= 1 0.2 6.2 A 0.2 C BPCB Footprints 0.6 ±0.05 P=1 ±0.03 A ±0.05 0.75 ±0.1 D ±0.05 Note : Shaded area must be free of any electrically conductive traces to avoid contact with soldered pin header terminations. Unit : mm Part No. HRS No. No. of contacts A B C D Remarks RoHS DF20F -10DP-1H(59) 686-0027-2(59) 10 24.0 27.5 26.2 25.8 DF20F -20DP-1H(59) 686-0028-5(59) 20 29.0 12.5 11.2 10.8 Without boss YES [Specifications number]-*, (**) DF20F -30DP-1H(59) 686-0029-8(59) 30 14.0 17.5 16.2 15.8 (59) : Gold plating, DF20F -40DP-1H(59) 686-0030-7(59) 40 19.0 22.5 21.2 20.8 embossed tape packaging Note : Order embossed tape packaging items by the reel. (1 reel contains 1,000 pieces) B270 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 2.75 ±0.05 +0.1 2.45 0 +0.1 +0.1 1.4 0 3.8 ±0.05 1.4 0 * * 5.5 +0.1 Ø1.5 0 +0.1 0 Ø1.5 DF20 Series●1mm Pitch Double Rows Low Profile Wire-to-Board Connectors BEmbossed Carrier Tape Dimensions ●Straight pin header 2 ±0.1 4 ±0.1 12 ±0.1 (0.4) +0.1 1.5 0 Unreeling direction (7.9) ●Right angle pin header 2±0.1 4±0.1 12±0.1 (0.4) +0.1 (7.4) 1.5 0 Unreeling direction ●Reel dimensions No. of Part No. A B C D 2 ±0.5 Contacts DF20F(G)-10DP-1V(56) 10 16 -------- 17.5 16.4 Product name DF20F(G)-20DP-1V(56) 20 24 -------- 11.5 24.4 Ø1.5mm diameter label feed hole depth DF20F(G)-30DP-1V(56) 30 32 28.4 14.2 32.4 DF20F(G)-40DP-1V(56) 40 44 40.4 20.2 44.4 DF20F(G)-50DP-1V(56) 50 44 40.4 20.2 44.4 DF20F - 10DP-1H(59) 10 16 -------- 17.5 16.4 DF20F - 20DP-1H(59) 20 24 -------- 11.5 24.4 DF20F - 30DP-1H(59) 30 32 28.4 14.2 32.4 DF20F - 40DP-1H(59) 40 44 40.4 20.2 44.4 +2 2±0.5 D 0 B271 Ø21±0.8 ±0.2 Ø13 R0.75 R0.75 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. +0.15 +0.15 1.7 0 1.7 0 0.2±0.05 0.2±0.05 ±0.1 C ±0.1 1.75±0.1 C ±0.1 1.75 B ±0.1 B ±0.1 A ±0.3 A ±0.3 (Ø80) ±2 Ø380 DF20 Series●1mm Pitch Double Rows Low Profile Wire-to-Board Connectors BUsage recommendation 1. Recommended Soldering Temperature Profile for IR Reflow. 10(s) max Temperature 250 240 220 200 150 60 to 120(s) 60(s) max 100 60 120 180 240 300 Time(S) Note 1 : Up to 2 cycles of reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2 : The temperature indicates the board surface temperature at the points of contacts with the connector terminals. 2. Recommended Manual Soldering Conditions Soldering temperature : 290°C ±10°C, Soldering time : within 3 sec. 3. Recommended Solder Screen Thickness 0.15mm 4. Board Warping Maximum of 0.03mm at the connector center section, with both ends of the connector as reference points. 5. Cleaning Conditions Refer to "Wire-to-Board Connector Use Handbook" 6. Wiring Termination Conditions Refer to "Wire-to-Board Connector Use Handbook" Crimp contacts should be handled with care as not to cause any deformation or damage affecting the performance or termination. 7. Mating / un-mating precautions Excessive twisting and pulling on wires during mating/un-mating should be avoided as it may cause damage to connectors. 8. Precautions Refer to "Wire-to-Board Connector Use Handbook" B272 Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.