Low-Angle Mating / Unmating Interface Connectors EX60B Series Rotating mating/unmating guide Plug Receptacle (Cradle mount) (Portable device mount) Angle mating/unmating ■Features Mating at 20° angle Lift (rotate) 1. Angle Mating / Unmating The cradle mount plug incorporates a unique rotating mating/unmating guide allowing the portable device to be placed or removed at an 20 20° ° angle, up to 20° max. In addition, the angle mating force is approximately 3N(29 pos.), with extremely low unmating forces. 2. High durability Bellow configuration of the contacts guarantees 10,000 angle mating/unmating cycles, without any degradation of electrical and mechanical performance. High speed data transfer 3. High-Speed Data Transfer 2.5 Gbps Eye Pattern Output Waveform A full eye pattern is maintained at a speed of 2.5 G bps, making it applicable for high-speed differential signals of the USB 2.0 and PCI- EXPRESS. 4. Secure attachment Standard or extended flange versions of the receptacle can be mounted directly to the portable device’s case. The cradle mount plug is attached using screws. 5. Low profile - Space-Saving Small size (4 mm high ∞ 6.8 mm deep) of the Receptacle allows efficient use of space in a Extended flange mounting portable device. ■Applications PDA and POS terminals, electronic books, tablet PCs, mobile TVs, media players, digital cameras and other devices requiring high durability angle mating/unmating connectors. Device case Extended flanges In cases where the application will demand a high level of reliability, such as automotive, 1 2014.3e please contact a company representative for further information. Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. EX60B Series●Low-Angle Mating / Unmating Interface Connectors ■Specifications Current raring 0.5A Rating Operating temperature range _55ç to +85ç Voltage rating 125V AC Characteristic Specification Conditions 1.Insulation resistance 1000Mø min. 250V DC 2.Dielectric withstanding voltage No flashover or insulation breakdown. 250V AC/ one minute 3.Contact resistance 60mø max. 100mA DC 4.Vibration No electrical discontinuity of 1μ sec. max. Frequency: 10 to 55 Hz, single amplitude of 0.75mm, Contact resistance: 100mø max. for 2 hours in 6 axis. 2 5.Shock No electrical discontinuity of 1μ sec. max. Acceleration of 490 m/s , 11 ms duration, sine half-wave waveform, Contact resistance: 100mø max. 3 cycles in each of the 6 axis. 6. Mating/un-mating Mating: 10N max. (Horizontal), With corresponding connector. forces 5N max. (At 20° angle) Un-mating: 10N max. (Horizontal), 2N max. (At 20° angle) 7.Durability Contact resistance: 100mø max. 5000 cycles (Straight mating) (mating/un-mating) 10000 cycles (At 20° angle) 8.Temperature cycle Contact resistance: 100mø max. Temperature : -55ç ➝ +15ç to +35ç ➝ +85ç ➝ + 15ç to +35ç Insulation resistance: 1000M ø min. Time (Minutes) : -30 ➝ +2 to 3 ➝ 30 ➝ +2 to 3 5 cycles 9.Humidity Contact resistance: 100mø max. 96 hours at temperature of 60ç and humidity of 90% to 95%. Insulation resistance: 5Mø min.(Dry state) 10.Salt spray No corrosions 5% salt water solution for 48 hours Note: Includes temperature rise caused by the current flow. ■Materials/ Finish ●Receptacles (Portable device mount) Component Material Finish Remarks Insulator LCP Color: Black UL94V-0 Contacts Copper alloy Contact area: Gold plated ------- Metal shield Stainless steel Tin plated ------- ●Plugs (Cradle mount) Component Material Finish Remarks Insulator Polyamide Color: Black UL94V-0 Contacts Copper alloy Contact area: Gold plated ------- Metal shield Stainless steel Tin-plated ------- Guide Stainless steel ------- ------- Spring Stainless steel ------- ------- ■Ordering information ●Receptacles (Portable device mount) 1 Series name : EXB - - EX 60 B 29 P FL 2 Termination type : 60 : Right angle SMT 1 2 1 3 4 5 3 Number of contacts : 15, 29 ●Plugs (Cradle mount) 4 Contact type P : Male contact (Receptacle = device mount) S : Female contact (Plug = cradle mount) - EX 60 B 29 S 5 Option FL : Extended flanges 1 2 1 3 4 2 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. EX60B Series●Low-Angle Mating / Unmating Interface Connectors ■Receptacles A 15 pos., 29 pos. (Standard) ● P=0.6 0.2(Contact width) BC D E Contact No. 1 Contact No. ** EX60B 1 0.3 4.1 FG Part number CL No. HRS No. A B C D E F G RoHS EX60B-29P 29 CL232-0611-5 16.8 13.65 12.35 14.25 12.95 13.5 12.2 YES EX60B-15P 15 CL232-0621-9 8.4 9.45 8.15 10.05 8.75 9.3 8.0 16.8 P=0.6 0.2(Contact width) 29 pos. (Extended flanges) ● Extended flanges 13.65 12.35 14.25 12.95 14.65 13.35 Contact No. 29 Contact No. 1 EX60B Part number CL No. RoHS 1 0.3 4.1 EX60B-29P-FL 232-0612-8 YES 13.5 12.2 B Recommended PCB mounting pattern EX60B-29P and EX60B-29P-FL EX60B-15P ● ● 16.8 8.4 P=0.6 P=0.6 0.4 0.4 Pad Pad Through hole Through hole Pad PCB edge Pad 2.4 4 PCB edge 3.7 Ø1.6 Ø1.6 11.4 9.2 7.9 12.2 10.9 13.4 12.1 14.6 13.3 3 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 2.1 0.4 2 2 4.7 6.8 1.6 6.8 0.8 4 0.8 4 2.1 0.4 2 0.9 4.05 2 4.7 0.9 4.05 Ø1.5 (Ø13) EX60B Series●Low-Angle Mating / Unmating Interface Connectors ■Portable device case cutout A B Part number A B EX60B-29P 14.5 13.2 EX60B-29P-FL EX60B EX60B-15P 10.3 9 Board mounting surface ■Packaging specifications 12 Unreeling direction 4 2 D (2) Unreeling direction Part number A B C D EX60B-29P 20.2 40.4 44.0 44.4 EX60B-29P-FL EX60B-15P 14.2 28.4 32.0 32.4 Note: 1,200 pieces per reel. 4 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (1) 4.25 A 1.75 B C (Ø380) R0.4 R0.8 EX60B Series●Low-Angle Mating / Unmating Interface Connectors ■Plug (Cradle mount) ●15 pos., 29 pos. AB C D F E G P=0.6 0.2(Contact width) HI Rotating mating unmating guide Contact No.1 Contact No.** 0.8 0.8 J K 0.3 2.2 LM 4.1 2.35 Part number Number of contacts HRS No. A B C D E F G H I J K L M RoHS EX60B-29S 29 CL232-0613-0 (16.0) (15.6) 13.6 13.2 11.15 10.75 16.8 13.3 12.0 11.85 11.45 15.85 15.45 YES EX60B-15S 15 CL232-0622-1 (11.8) (11.4) 9.4 9.0 6.95 6.55 8.4 9.1 7.8 7.65 7.25 11.65 11.25 ■Recommended PCB mounting pattern A B C D E F 2.2(Land) G 1.4(Through hole) P=0.6 0.4 PCB edge Ø2.6(Hole) Part number A B C D E F G EX60B-29S 15.85 15.45 13.6 13.2 11.85 11.45 16.8 EX60B-15S 11.65 11.25 9.4 9.0 7.65 7.25 8.4 5 Ø2.4 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1.6(Land) 0.8(Through hole) 2 1.8 2.2 3.9 2.95 2.2 1.3 0.9 4.35 (3.1) 8.5 1.7 3.85 1 25°MAX (Ø13) Ø1.5 EX60B Series●Low-Angle Mating / Unmating Interface Connectors ■Cradle case mounting recommendations - Plug 2 2MIN AB Board mounting surface Screw attachment Part number A B EX60B-29S 13.65 12.35 EX60B-15S 9.45 8.15 1 Notes The maximum opening angle of the rotating mating/unmating guide is 25°. Do not exceed this angle. 2 Notes Device’s case must have the recommended cutout dimensions. Assure that there is no interference with the free movement and operation of the mating/unmating guide. Notes Use screw (not supplied) to attach the receptacle to the case. 3 ■Packaging Specifications (Plug, EX60B-29S) Unreeling direction 16 2.4 4 2 D (2) Center of vacuum Unreeling direction pick-up area Part number A B C D EX60B-29S 26.2 52.4 56.0 56.4 EX60B-15S 20.2 40.4 44.0 44.4 Note: 800 pieces per reel. 6 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (4.1) 14.4 5.5MIN 2 (1) A 1.75 B C (Ø380) EX60B Series●Low-Angle Mating / Unmating Interface Connectors ■Mating cross-section (14) Flange EX60B-**P Receptacle (Portable device mount) Flange EX60B-**S Plug (cradle mount) ■Recommended Temperature Profile (Tamperature) (ç) 250ç 250 230ç min 200 180ç 150ç 150 100 90 sec. 30 sec. 50 Preheating Soldering (Time) Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. 7 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (4.75) EX60B Series●Low-Angle Mating / Unmating Interface Connectors ■Portable device case and cradle design requirements 1. Mating/unmating angles (see illustrations below) (1) Angle on the Z-axis is 20° max. (2) Angle on the X-axis is 3° max. Mating/ unmating angle 3° (X-axis) Mating/unmating angle 20° (Z-axis) Cradle 2.Dimensional requirements (1) Distance between the flanges of the receptacle and plug: 0 to 0.7 mm. (2) Distance between the PCB mounting surface of the plug (cradle) and the PCB surface of the receptacle (portable device): 4.8±0.1 mm. (1) 0 to 0.7mm (2) 4.8±0.1mm Receptacle front flange surface Cradle Cradle connector flange surface 3.Portable device removal The point of the rotation of the portable device during it’s removal from the cradle should be at the distance of 6.5 mm min. as illustrated below. Lift and remove Point of rotation Portable device 6.5 min Cradle ® 6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN + + TEL: 81-45-620-3526 Fax: 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. 8 The contents of this catalog are current as of date of 3/2014. Contents are subject to change without notice for the purpose of improvements. Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.