The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.5mm and 1mm Pitch Connectors For FPC/FFC FH12 Series Flip-lock Features Rotating One-touch Mechanism 1. Ease of Use and Space Savings q Only one finger or 6.9N (Newtons) of force is required to lock Hirose’s rotational actuator (flip-lock) as compared to using 2 fingers and 39.2N to close a FFC/FPC connector from our competition. The Flip-Lock design also allows customers to place 2 or more connectors side by side as there is no need to waste additional board space for a side latch. 2. Strengthened Flip-lock Actuator The standard Flip-Lock requires only 2.0mm height above the board. A strengthened lock lever is available which only requires an additional 0.4mm. w 3. Supports Thin FPC (0.18mm) Hirose does not require double-sided FPC to have any additional strengthening plate or stiffener and can therefore support a thickness of as little as 0.18mm +/- 0.05. 4. Hirose Ensures Reliability Hirose’s patented half tuning fork contacts maintain the required normal force without relying on the connector housing. With our competitor’s conventional products the housing walls support the contact force, which does not provide for long-term reliability. e 5. Prevention of Solder Bridge Excess solder cavity absorbs excessive solder and avoids solder bridging. 6. Three different assembly types FH12 is offered in Top & Bottom Contact and Vertical Mount and offered in both a 0.5mm contact pitch as well as a 1.0mm contact pitch (bottom contact only). Applications Notebook computers, printers, PDAs, digital cameras and other compact devices for interconnecting the main circuit board with the LCD, HDD or other device. 6 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Product Specifications Current rating: 0.4A DC Operating Temperature Range:_40 to +70ç (Note 1) Storage Temperature Range:_10 to +50ç (Note 2) Rating Voltage rating: 50V AC Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max. (Not dewed) (Not dewed) Applicable FPC t=0.3±0.05 Tin-lead plated(Note 3) t=0.18 ± 0.05 for FH12F-*S-0.5SH Item Specification Conditions 1. Insulation resistance 500M ohms minimum 100V DC 2. Withstanding voltage No flashover or insulation breakdown. 150V AC/1 minute 3. Contact resistance 50m ohms maximum 1mA Contact resistance: 50m ohms maximum 4. Durability (Insertion/withdrawal) 20 cycles No damage, cracks, or parts dislocation. No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5. Vibration Contact resistance: 50m ohms maximum. 2 hours in each of the 3 directions. No damage, cracks, or parts dislocation. No electrical discontinuity of 1µs or more 2 Acceleration of 490 m/s , 11 ms duration, 6. Shock Contact resistance: 50m ohms maximum. sine half-wave waveform, 3 cycles in each of the 3 axis. No damage, cracks, or parts dislocation. Contact resistance: 50m ohms maximum. 7. Humidity(Steady state) Insulation resistance: 50M ohms minimum. 96 hours at temperature of 40ç and humidity of 90% to 95% No damage, cracks, or parts dislocation. Contact resistance: 50m ohms maximum. 5 cycles under conditions as follows; 8. Temperature Cycle Insulation resistance: 50M ohms minimum. Temperature: -40ç / 15 to 35ç / 85ç / 15 to 35ç, No damage, cracks, or parts dislocation. Time: 30 5 max. 30 5 max.(minutes) / / / No deformation of Reflow: At the recommended temperature profile 9.Resistance to Soldering heat Manual soldering: 350±5ç for 3 seconds components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation. Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (55) specification. Material Part Material Finish Remarks Polyamide, LCP(60 pos.) Color : Beige Insulator UL94V-0 PPS Color : Dark brown Contact Phosphor bronze Tin-lead plated ––––––– Metal Fittings Brass plated Tin-lead Ordering Information FH12 A - 10 (4) - S A - 0.5 SH (55) qe w r t y u i o q Series Name : FH12 t Contact alignment: Single w Blank : standard type y Eccentric direction: A : Top contact type Blank : standard type S : Type with strengthed flip-lock actuator A : Eccentric type F : Type with 0.18mm FPC End Thickness u Contacts Pitch : 0.5mm, 1mm e Standard type : Number of contacts i Contact type Eccentric type : Number of contacts in 0.5mm housing SH : SMT horizontal mounting type r Standard type : Blank SV : SMT vertical mounting type Eccentric type : Number of contacts o Plating specification Blank : plated Tin-lead (55) : Gold plated 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BSeries Configuration Pitch Bottom Contact Type Top Contact Type Vertical mounting Type FPC conductive surface (bottom side) FPC conductive surface FH12- ** S-0.5SH P.12 Number of contacts 6, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 0.5mm 22, 24, 25, 26, 28, 30, 32, 33, 34, 36, 40, 45, 50, 53 Type with Strengthened Lock Lever P.13 FH12S- ** S-0.5SH Number of contacts 30, 40, 45, 50, 53 Type with 0.18mm FPC End Thickness P.15 P.16 FH12A- ** S-0.5SH FH12- ** S-0.5SV P.14 FH12F- ** S-0.5SH Number of contacts 10, 12 ,15, 16, 18, 20, Number of contacts 10, 12, 13, 15, 16, 17, 22, 24, 26, 28, 29, 30, Number of contacts 6, 10, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 30, 32, 33, 34, 36, 40, 42, 18, 20, 22, 24, 26, 28, 32, 33, 34, 36, 40, 45, 45, 50 49, 50, 60 30, 32, (33), 34, 36, 40 FPC conductive surface (bottom side) 1mm P.18 Standard FH12- ** S-1SH Eccentric FH12- ** (**) S-1SH Standard Number of contacts 5, 6, 7, 8, 9, 11, 16, 22, 26 P.19 FH12- ** S-1SV Eccentric Number of contacts 6, 7, 8, 16, 20, 22, Number of contacts 4, 6, 8, 10, 11, 24 14, 19, 24 8 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BConnector Operating Instructions, precautions and recommendations Bottom Contact Type (common for 0.5mm/1mm) Operation Precautions 1) Avoid grasping the actuator with two fingers or lift- 1. FPC/FFC Termination procedure. ing the actuator with fingernail. Connector installed on the board. 1) Lift up the actuator. Use thumb or index finger. 2) Rotate down the actuator until firmly closed. 2) Fully insert the FPC/FFC parallel to mounting sur- It is critical that the inserted FPC/FFC is not moved face, with the exposed conductive traces facing and remains fully inserted. Should the FPC/FFC be down. moved, open the actuator and repeat the process, starting with Step 1 above. Stiffener FPC/FFC conductive traces 3) Due to the structure of the connectors, they do 2. FPC/FFC Removal not have strong resistance to upward pulling; 1) Lift up the actuator. therefore, support the FPC/FFC when a pulling 2) Carefully remove the FPC/FFC. force is applied to it. 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Top Contact Type Operation Precautions 1) Avoid forcing the actuator up or down without the 1. FPC/FFC Termination procedure. FPC/FFC inserted. Connector installed on the board. 1) Lift up the actuator. Use thumb or index finger. 2) Fully insert the FPC/FFC parallel to mounting sur- face, with the exposed conductive traces facing UP. FPC/FFC conductive traces 2) When closing down the actuator apply equal pres- sure to both sides of the actuator. Stiffener 3) Rotate down the actuator until firmly closed. It is critical that the inserted FPC/FFC is not moved and remains fully inserted. Should the FPC/FFC be moved, open the actuator and repeat the process, starting with Step 1 above. 3) Avoid forced pulling of the FPC. Forced pulling will cause the FPC to become disconnected or damaged. 2. FPC/FFC Removal 1) Lift up the actuator. 2) Carefully remove the FPC/FFC. 10 FPC insertion area Slot The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Vertical Mounting Type Operation Precautions 1) Avoid forcing the actuator up or down without the 1. FPC/FFC Termination procedure. FPC/FFC inserted. Connector installed on the board. 1) Verify that the actuator is positioned upright. If the actuator has rotated to the side, carefully rotate it upright. Actuator upright 2) Insert the FPC/FFC vertically in the connector slot assuring that the conductive traces of the FPC/FFC are facing away from the actuator. FPC/FFC conductive traces Stiffener 3) Press down the actuator in the direction shown. 2. FPC/FFC Removal Rotate the actuator upward and withdraw the FPC/FFC. 11 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.5mm Pitch Bottom Contact Type A 0.5 (0.2) Mated Cross-sectional Diagram FPC/FFC Contact Surface (2.1) (3.1) (1.3) B C D 4.6 5.6 Unit:mm Part Number CL No. Number of Contacts A B C D FH12-06S-0.5SH 586-0582-5 6 02.5 06.1 07.1 03.57 FH12-10S-0.5SH 586-0522-3 10 04.5 08.1 09.1 05.57 FH12-11S-0.5SH 586-0600-5 11 05.0 08.6 09.6 06.07 FH12-12S-0.5SH 586-0704-0 12 05.5 09.1 10.1 06.57 FH12-13S-0.5SH 586-0549-0 13 06.0 09.6 10.6 07.07 FH12-14S-0.5SH 586-0533-0 14 06.5 10.1 11.1 07.57 FH12-15S-0.5SH 586-0523-6 15 07.0 10.6 11.6 08.07 FH12-16S-0.5SH 586-0531-4 16 07.5 11.1 12.1 08.57 FH12-17S-0.5SH 11.6 09.07 586-0606-1 17 08.0 12.6 FH12-18S-0.5SH 586-0530-1 18 08.5 12.1 13.1 09.57 FH12-19S-0.5SH 586-0534-2 19 09.0 12.6 13.6 10.07 FH12-20S-0.5SH 586-0524-9 20 09.5 13.1 14.1 10.57 FH12-22S-0.5SH 586-0532-7 22 10.5 14.1 15.1 11.57 FH12-24S-0.5SH 586-0521-0 24 11.5 15.1 16.1 12.57 FH12-25S-0.5SH 586-0692-3 25 12.0 15.6 16.6 13.07 FH12-26S-0.5SH 586-0576-2 26 12.5 16.1 17.1 13.57 FH12-28S-0.5SH 586-0612-4 28 13.5 17.1 18.1 14.57 Note 2 FH12-30S-0.5SH 586-0525-1 30 14.5 18.1 19.1 15.57 FH12-32S-0.5SH 586-0681-7 32 15.5 19.1 20.1 16.57 FH12-33S-0.5SH 586-0520-8 33 16.0 19.6 20.6 17.07 FH12-34S-0.5SH 586-0617-8 34 16.5 20.1 21.1 17.57 FH12-36S-0.5SH 586-0526-4 36 17.5 21.1 22.1 18.57 Note 2 FH12-40S-0.5SH 586-0527-7 40 19.5 23.1 24.1 20.57 Note 2 FH12-45S-0.5SH 586-0528-0 45 22.0 25.6 26.6 23.07 Note 2 FH12-50S-0.5SH 586-0529-2 50 24.5 28.1 29.1 25.57 Note 2 FH12-53S-0.5SH 586-0595-7 53 26.0 29.6 30.6 27.07 Note 1 : Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels. Note : If there is no problem with the connector height, we recommend the type with the 2 strengthened Flip-lock actuator (FH12S-*S-0.5SH). Standard type connector height: 2 mm Connector height of type with strengthened Flip-lock actuator: 2.4 mm 12 1.2 2 0.8 (4.8) 2 2 1.85 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.5mm Pitch Bottom Contact Type with Strengthened Flip-lock Actuator A 0.5 () 0.2 Mated Cross-sectional Diagram () FPC/FFC Contact Surface 2.1 () 3.1 () 1.3 B C D 4.6 5.6 Unit:mm Part Number CL No. Number of Contacts A B C D FH12S-30S-0.5SH 586-0667-6 30 14.5 18.1 19.1 15.57 FH12S-40S-0.5SH 586-0640-0 40 19.5 23.1 24.1 20.57 FH12S-45S-0.5SH 586-0665-0 45 22.0 25.6 26.6 23.07 FH12S-50S-0.5SH 586-0642-5 50 24.5 28.1 29.1 25.57 FH12S-53S-0.5SH 586-0691-0 53 26.0 29.6 30.6 27.07 Note: Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels. 13 1.2 2 0.8 (4.8) 2.4 2.25 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.5mm Pitch Bottom Contact Type with 0.18mm FPC End Thickness A Applicable FPC end thickness : 0.18±0.05 0.5 Mated Cross-sectional Diagram () 0.2 FPC Contact Surface () 2.15 () 3.15 () 1.25 B C D 4.6 5.6 Unit:mm Part Number CL No. Number of Contacts A B C D FH12F-06S-0.5SH 586-0672-6 6 02.5 06.1 07.1 03.57 FH12F-10S-0.5SH 586-0709-4 10 04.5 08.1 09.1 05.57 FH12F-12S-0.5SH 586-0653-1 12 05.5 09.1 10.1 06.57 FH12F-13S-0.5SH 586-0629-7 13 06.0 09.6 10.6 07.07 FH12F-14S-0.5SH 586-0655-7 14 06.5 10.1 11.1 07.57 FH12F-15S-0.5SH 586-0680-4 15 07.0 10.6 11.6 08.07 FH12F-16S-0.5SH 11.1 08.57 586-0673-9 16 07.5 12.1 FH12F-18S-0.5SH 586-0626-9 18 08.5 12.1 13.1 09.57 FH12F-20S-0.5SH 586-0636-2 20 09.5 13.1 14.1 10.57 FH12F-22S-0.5SH 586-0630-6 22 10.5 14.1 15.1 11.57 FH12F-24S-0.5SH 586-0632-1 24 11.5 15.1 16.1 12.57 FH12F-26S-0.5SH 586-0627-1 26 12.5 16.1 17.1 13.57 FH12F-28S-0.5SH 586-0643-8 28 13.5 17.1 18.1 14.57 FH12F-30S-0.5SH 586-0628-4 30 14.5 18.1 19.1 15.57 FH12F-32S-0.5SH 586-0705-3 32 15.5 19.1 20.1 16.57 FH12F-33S-0.5SH -------------------- 33 16.0 19.6 20.6 17.07 FH12F-34S-0.5SH 586-0677-0 34 16.5 20.1 21.1 17.57 FH12F-36S-0.5SH 586-0656-0 36 17.5 21.1 22.1 18.57 FH12F-40S-0.5SH 586-0635-0 40 19.5 23.1 24.1 20.57 Note: Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels. 14 1.2 2 0.8 () 4.8 2 1.85 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.5mm Pitch Top Contact Type A B Mated Cross-sectional Diagram C 0.5 (1.9) FPC/FFC Contact Surface (0.2) (1.45) 2 (5) 6.2 D E (0.45) 0.8 1.45 Unit:mm Part Number CL No. Number of Contacts A B C D E FH12A-10S-0.5SH 586-0550-9 10 9.1 8.35 4.5 9.5 5.57 FH12A-12S-0.5SH 586-0696-4 12 10.1 9.35 5.5 10.5 6.57 FH12A-15S-0.5SH 586-0551-1 15 11.6 10.85 7.0 12.0 8.07 FH12A-16S-0.5SH 586-0552-4 16 12.1 11.35 7.5 12.5 8.57 FH12A-18S-0.5SH 586-0553-7 18 13.1 12.35 8.5 13.5 9.57 FH12A-20S-0.5SH 586-0554-0 20 14.1 13.35 9.5 14.5 10.57 11.57 FH12A-22S-0.5SH 586-0686-0 22 15.1 14.35 10.5 15.5 FH12A-24S-0.5SH 586-0555-2 24 16.1 15.35 11.5 16.5 12.57 FH12A-26S-0.5SH 586-0663-5 26 17.1 16.35 12.5 17.5 13.57 FH12A-28S-0.5SH 586-0725-0 28 18.1 17.35 13.5 18.5 14.57 FH12A-29S-0.5SH 586-0585-3 29 18.6 17.85 14.0 19.0 15.07 FH12A-30S-0.5SH 586-0556-5 30 19.1 18.35 14.5 19.5 15.57 FH12A-32S-0.5SH 586-0687-3 32 20.1 19.35 15.5 20.5 16.57 FH12A-33S-0.5SH 586-0570-6 33 20.6 19.85 16.0 21.0 17.07 FH12A-34S-0.5SH 586-0670-0 34 21.1 20.35 16.5 21.5 17.57 FH12A-36S-0.5SH 586-0662-2 36 22.1 21.35 17.5 22.5 18.57 FH12A-40S-0.5SH 586-0557-8 40 24.1 23.35 19.5 24.5 20.57 FH12A-42S-0.5SH 586-0698-0 42 25.1 24.35 20.5 25.5 21.57 FH12A-45S-0.5SH 586-0558-0 45 26.6 25.85 22.0 27.0 23.07 FH12A-50S-0.5SH 586-0559-3 50 29.1 28.35 24.5 29.5 25.57 Note 1 : Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels. Note : The design is such that the FPC/FFC protrudes on an upward angle so that other 2 parts can be mounted beneath the PFC/FFC. In view of this, please take note of the gap at the top surface of the connector. 15 (1.85) 2.2 0.85 (3.6) 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.5mm Pitch Vertical mounting Type Mated Cross-sectional Diagram () 0.2 1 ( 0.15 ) FPC/FFC Contact Surface 1 F 0.52.5 0.5 () 4.25 A () 1.75 B 0.5 C D E Unit:mm Part Number CL No. Number of Contacts A B C D E F FH12-10S-0.5SV 586-0560-2 10 08.4 06.9 04.5 06.5 08.2 4 FH12-12S-0.5SV 586-0615-2 12 09.4 07.9 05.5 07.5 09.2 4 FH12-13S-0.5SV 586-0575-0 13 09.9 08.4 06.0 08.0 09.7 4 FH12-15S-0.5SV 586-0561-5 15 10.9 09.4 07.0 09.0 10.7 4 FH12-16S-0.5SV 586-0572-1 16 11.4 09.9 07.5 09.5 11.2 4 FH12-17S-0.5SV 586-0601-8 17 11.9 10.4 08.0 10.0 11.7 4 12.2 FH12-18S-0.5SV 586-0573-4 18 12.4 10.9 08.5 10.5 4 FH12-20S-0.5SV 586-0562-8 20 13.4 11.9 09.5 11.5 13.2 4 FH12-22S-0.5SV 586-0589-4 22 14.4 12.9 10.5 12.5 14.2 8 FH12-24S-0.5SV 586-0563-0 24 15.4 13.9 11.5 13.5 15.2 8 FH12-26S-0.5SV 586-0664-8 26 16.4 14.9 12.5 14.5 16.2 8 FH12-30S-0.5SV 586-0564-3 30 18.4 16.9 14.5 16.5 18.2 8 FH12-32S-0.5SV 586-0699-2 32 19.4 17.9 15.5 17.5 19.2 8 FH12-33S-0.5SV 586-0565-6 33 19.9 18.4 16.0 18.0 19.7 8 FH12-34S-0.5SV 586-0706-6 34 20.4 18.9 16.5 18.5 20.2 8 FH12-36S-0.5SV 586-0641-2 36 21.4 19.9 17.5 19.5 21.2 8 FH12-40S-0.5SV 586-0566-9 40 23.4 21.9 19.5 21.5 23.2 8 FH12-45S-0.5SV 586-0567-1 45 25.9 24.4 22.0 24.0 25.7 8 FH12-49S-0.5SV 586-0602-0 49 27.9 26.4 24.0 26.0 27.7 8 FH12-50S-0.5SV 586-0568-4 50 28.4 26.9 24.5 26.5 28.2 8 FH12-60S-0.5SV 586-0735-4 60 33.4 31.9 29.5 31.5 33.2 8 Note 1 : Embossed tape reel packaging (1,000 pieces/reel). Order by number of reels. 16 (4.85) ( ) 1.4 3.6 ( ) 2.15 5.5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BRecommended FPC/FFC dimensions and Land/Metal Mask dimensions 0.5mm Pitch Product FPC/FFC dimensions Land / Metal Mask dimensions B±0.1 C±0.1 0.5±0.05 0.35±0.03(FPC) C 0.3±0.03(FFC) 0.5±0.1 A±0.05 0.3±0.03(Land) B±0.07 0.5±0.05 0.25±0.03(Metal mask) A±0.05 Product Type C Dimension Types other than 0.3±0.05min Recommended metal mask thickness : 0.15mm those below ( ) Stiffener thickness should be 0.188 mm 7.5 mil min 0.5mm Pitch FH12F 0.18±0.05 Bottom Contact Unit: mm Unit: mm Type Dimension Dimension Dimension Dimension Number A B Number A B Number A B C Number A B C of Contacts of Contacts of Contacts of Contacts 6 02.5 03.5 25 12.0 13.0 6 02.5 08.1 04.5 25 12.0 17.6 14.0 10 04.5 05.5 26 12.5 13.5 10 04.5 10.1 06.5 26 12.5 18.1 14.5 11 05.0 06.0 28 13.5 14.5 11 05.0 10.6 07.0 28 13.5 19.1 15.5 0.5mm Pitch 12 05.5 06.5 29 14.0 15.0 12 05.5 11.1 07.5 29 14.0 19.6 16.0 Top Contact 13 06.0 07.0 30 14.5 15.5 13 06.0 11.6 08.0 30 14.5 20.1 16.5 Type 14 06.5 07.5 32 15.5 16.5 14 06.5 12.1 08.5 32 15.5 21.1 17.5 15 07.0 08.0 33 16.0 17.0 15 07.0 12.6 09.0 33 16.0 21.6 18.0 16 07.5 08.5 34 16.5 17.5 16 07.5 13.1 09.5 34 16.5 22.1 18.5 17 08.0 09.0 36 17.5 18.5 17 08.0 13.6 10.0 36 17.5 23.1 19.5 18 08.5 09.5 40 19.5 20.5 18 08.5 14.1 10.5 40 19.5 25.1 21.5 19 09.0 10.0 42 20.5 21.5 19 09.0 14.6 11.0 42 20.5 26.1 22.5 20 09.5 10.5 45 22.0 23.0 20 09.5 15.1 11.5 45 22.0 27.6 24.0 22 10.5 11.5 50 24.5 25.5 22 10.5 16.1 12.5 50 24.5 30.1 26.5 24 11.5 12.5 53 26.0 27.0 24 11.5 17.1 13.5 53 26.0 31.6 28.0 Even contact number Odd contact number No.1 contact No.1 contact A±0.1 A±0.1 0.8±0.1(Land) 0.8±0.1(Land) 0.65±0.05(Metal mask) 0.65±0.05(Metal mask) 0.5±0.05 0.35±0.03(FPC) 0.3±0.05 0.5±0.05 0.6±0.1(Land) 0.5±0.05 0.6±0.1(Land) 0.3±0.03(FFC) 1±0.05 0.5±0.05(Metal mask) 1±0.05 0.5±0.05(Metal mask) 0.5±0.1 A±0.05 B±0.05 B±0.05 1±0.05 1±0.05 1±0.05 1±0.05 B±0.07 Recommended metal mask thickness : 0.15mm *Set the stiffener thickness to 0.188 (7.5mil) min. Unit: mm Unit: mm 0.5mm Pitch Dimension Dimension Dimension Dimension Number A B Number A B Number A B Number A B Vertical of Contacts of Contacts of Contacts of Contacts Mounting Type 10 04.5 05.5 26 12.5 13.5 10 06.5 04.5 26 14.5 12.5 12 05.5 06.5 30 14.5 15.5 12 07.5 05.5 30 16.5 14.5 13 06.0 07.0 32 15.5 16.5 13 08.0 06.0 32 17.5 15.5 15 07.0 08.0 33 16.0 17.0 15 09.0 07.0 33 18.0 16.0 16 07.5 08.5 34 16.5 17.5 16 09.5 07.5 34 18.5 16.5 17 08.0 09.0 36 17.5 18.5 17 10.0 08.0 36 19.5 17.5 18 08.5 09.5 40 19.5 20.5 18 10.5 08.5 40 21.5 19.5 20 09.5 10.5 45 22.0 23.0 20 11.5 09.5 45 24.0 22.0 22 10.5 11.5 49 24.0 25.0 22 12.5 10.5 49 26.0 24.0 24 11.5 12.5 50 24.5 25.5 24 13.5 11.5 50 26.5 24.5 60 29.5 30.5 60 31.5 29.5 17 2MIN 3.5MIN 4.5MIN 3MIN 1.8±0.1 1.8±0.1 1.3±0.1 1.5±0.1 2.2±0.1 1.5±0.1 1.5 ±0.1 4.5±0.1 1.8±0.1 1.8±0.1 1.5±0.1 1.5±0.1 4.5±0.1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 1mm Pitch Type Bottom Contact Type 2.3 A E 1.0 (0.2) Mated Cross-sectional Diagram (2.1) FPC/FFC Contact Surface (3.1) (1.3) B C D 4.6 5.6 Unit:mm Part Number CL No. Number of Contacts A B C D E FH12-05S-1SH 586-0591-6 5 04 08.6 09.6 06.07 2.3 FH12-06S-1SH 586-0607-4 6 05 09.6 10.6 07.07 2.3 FH12-07S-1SH 586-0535-5 7 06 10.6 11.6 08.07 2.3 FH12-08S-1SH 586-0579-0 8 07 11.6 12.6 09.07 2.3 FH12-09S-1SH 586-0540-5 9 08 12.6 13.6 10.07 2.3 FH12-11S-1SH 586-0668-9 11 10 14.6 15.6 12.07 2.3 FH12-16S-1SH 19.6 17.07 2.3 586-0536-8 16 15 20.6 FH12-22S-1SH 586-0547-4 22 21 25.6 26.6 23.07 2.3 FH12-26S-1SH 586-0592-9 26 25 29.6 30.6 27.07 2.3 ( ) FH12-10 4 SA-1SH 586-0537-0 4 03 08.1 09.1 05.57 2.8 ( ) FH12-14 6 SA-1SH 586-0538-3 6 05 10.1 11.1 07.57 2.8 FH12-18(8)SA-1SH 586-0539-6 8 07 12.1 13.1 09.57 2.8 ( ) FH12-22 10 SA-1SH 586-0541-8 10 09 14.1 15.1 11.57 2.8 ( ) FH12-24 11 SA-1SH 586-0542-0 11 10 15.1 16.1 12.57 2.8 ( ) FH12-30 14 SA-1SH 586-0543-3 14 13 18.1 19.1 15.57 2.8 ( ) FH12-40 19 SA-1SH 586-0546-1 19 18 23.1 24.1 20.57 2.8 FH12-50(24)SA-1SH 586-0548-7 24 23 28.1 29.1 25.57 2.8 Note 1: Embossed tape reel packaging (2,000 pieces/reel). Order by number of reels. Note 2: The 1mm version of FH12 is constructed by loading every other contact into the 0.5mm housing. When a housing designed for an odd number of 0.5mm pitch contacts is used; the spacing from the edge to the first contact on either side is the same as the distance between each contact, 1.0mm. Hirose considers this design to be a standard-type 1.0mm connector. Note 2: An eccentric-type connector using a housing designed for an even number of 0.5mm pitch contacts and consequently one side has 1.5mm distance from the edge to the first contact. (See FPC/FFC dimensional drawing on page 19) The part number for the eccentric type describes the size of the 0.5mm housing used and lists the number of 1.0mm pitch contacts in parentheses () as shown in the above table. 18 Eccentric type Standard type 1.2 2 0.8 (4.8) 2 1.85 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 1mm Pitch Vertical Mounting Type Mated Cross-sectional Diagram (0.2) 2 (0.15) FPC/FFC Contact Surface 2F 0.52.5 0.5 (4.25) A (1.75) B 1.0 ( ) C 3.8 Metal fitting dimension D E Unit:mm Part Number CL No. Number of Contacts A B C D E F FH12-06S-1SV 586-0605-9 6 09.9 08.4 05 08 09.7 4 FH12-07S-1SV 586-0610-9 7 10.9 09.4 06 09 10.7 4 FH12-08S-1SV 586-0593-1 8 11.9 10.4 07 10 11.7 4 FH12-16S-1SV 586-0574-7 16 19.9 18.4 15 18 19.7 8 23.7 8 FH12-20S-1SV 586-0634-7 20 23.9 22.4 19 22 FH12-22S-1SV 586-0584-0 22 25.9 24.4 21 24 25.7 8 FH12-24S-1SV 586-0594-4 24 27.9 26.4 23 26 27.7 8 Note: Embossed tape reel packaging (1,000 pieces/reel). Order by number of reels. 19 (4.85) (1.4) 3.6 (2.15) 5.5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BRecommended FPC/FFC dimensions and Land/Metal Mask dimensions 1mm Pitch Product FPC/FFC dimensions Land / Metal Mask dimensions Recommended metal mask thickness : 0.15mm πSet the stiffener thickness to 0.188 (7.5mil) min. 1mm Pitch Unit: mm Unit: mm Bottom Contact Dimension Dimension Dimension Dimension Type Number A B C Number A B C Number A B C D Number A B C D of Contacts of Contacts of Contacts of Contacts 5 04 06 1 4 03 05.5 1.5 5 04 10.6 07 1.5 4 03 10.1 06.5 2 6 05 07 1 6 05 07.5 1.5 6 05 11.6 08 1.5 6 05 12.1 08.5 2 7 06 08 1 8 07 09.5 1.5 7 06 12.6 09 1.5 8 07 14.1 10.5 2 8 07 09 1 10 09 11.5 1.5 8 07 13.6 10 1.5 10 09 16.1 12.5 2 9 08 10 1 11 10 12.5 1.5 9 08 14.6 11 1.5 11 10 17.1 13.5 2 11 10 12 1 14 13 15.5 1.5 11 10 16.6 13 1.5 14 13 20.1 16.5 2 16 15 17 1 19 18 20.5 1.5 16 15 21.6 18 1.5 19 18 25.1 21.5 2 22 21 23 1 24 23 25.5 1.5 22 21 27.6 24 1.5 24 23 30.1 26.5 2 26 25 27 1 26 25 31.6 28 1.5 1mm Pitch Vertical Recommended metal mask thickness : : 0.15mm *Set the stiffener thickness to 0.188 (7.5mil) min. Mounting Type Unit: mm Unit: mm Dimension Dimension Number A B Number A B of Contacts of Contacts 6 05 07 6 08 05 7 06 08 7 09 06 8 07 09 8 10 07 16 15 17 16 18 15 20 19 21 20 22 19 22 21 23 22 24 21 24 23 25 24 26 23 20 Standard Type Eccentric Type Standard Type Eccentric Type The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BPackaging Specification Embossed Carrier Tape Dimensions ( ) Horizontal Type Common to Bottom/Top Contact, 0.5mm/1mm Pitch Flat surface for placement (2.0) with Automatic equipment 0.5mm Pitch Bottom/Top Contact Type Unit:mm Dimension Dimension A B C D A B C D Number Number of Contacts of Contacts 6 16 ---------- 07.5 16.5 25 24 ---------- 11.5 24.5 10 16 ---------- 07.5 16.5 26 24 ---------- 11.5 24.5 11 16 ---------- 07.5 16.5 28 32 28.4 14.2 32.5 12 24 ---------- 11.5 24.5 29 32 28.4 14.2 32.5 13 24 ---------- 11.5 24.5 30 32 28.4 14.2 32.5 14 24 ---------- 11.5 24.5 32 32 28.4 14.2 32.5 15 24 ---------- 11.5 24.5 33 32 28.4 14.2 32.5 16 24 ---------- 11.5 24.5 34 32 28.4 14.2 32.5 17 24 ---------- 11.5 24.5 36 44 40.4 20.2 44.5 18 24 ---------- 11.5 24.5 40 44 40.4 20.2 44.5 19 24 ---------- 11.5 24.5 42 44 40.4 20.2 44.5 20 24 ---------- 11.5 24.5 45 44 40.4 20.2 44.5 22 24 ---------- 11.5 24.5 50 44 40.4 20.2 44.5 24 24 ---------- 11.5 24.5 53 44 40.4 20.2 44.5 Note: 2,000 pieces per reel. Unit:mm1mm Pitch Bottom Contact Type Dimension Dimension A B C D A B C D Number Number of Contacts of Contacts 5 16 ---------- 07.5 16.5 4 16 ---------- 07.5 16.5 6 24 ---------- 11.5 24.5 6 24 ---------- 11.5 24.5 7 24 ---------- 11.5 24.5 8 24 ---------- 11.5 24.5 8 24 ---------- 11.5 24.5 10 24 ---------- 11.5 24.5 9 24 ---------- 11.5 24.5 11 24 ---------- 11.5 24.5 11 24 ---------- 11.5 24.5 14 32 28.4 14.2 32.5 16 32 28.4 14.2 32.5 19 44 40.4 20.2 44.5 22 44 40.4 20.2 44.5 24 44 40.4 20.2 44.5 26 44 40.4 20.2 44.5 Note: 2,000 pieces per reel. 21 Standard Type Eccentric Type The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Vertical Mounting Type (Common to 0.5mm/1mm Pitch) Flat surface for placement with Automatic equipment (1.75) 0.5mm Pitch Vertical mounting Type Unit:mm Dimension Dimension A B C D A B C D Number Number of Contacts of Contacts 10 16 ---------- 07.5 16.5 26 24 ---------- 11.5 24.5 12 16 ---------- 07.5 16.5 30 32 28.4 14.2 32.5 13 24 ---------- 11.5 24.5 32 32 28.4 14.2 32.5 15 24 ---------- 11.5 24.5 33 32 28.4 14.2 32.5 16 24 ---------- 11.5 24.5 34 44 40.4 20.2 44.5 17 24 ---------- 11.5 24.5 36 44 40.4 20.2 44.5 18 24 ---------- 11.5 24.5 40 44 40.4 20.2 44.5 20 24 ---------- 11.5 24.5 45 44 40.4 20.2 44.5 22 24 ---------- 11.5 24.5 49 44 40.4 20.2 44.5 24 24 ---------- 11.5 24.5 50 44 40.4 20.2 44.5 Note: 1,000 pieces per reel. 60 56 52.4 26.2 56.5 Unit:mm1mm Pitch Vertical mounting Type Dimension A B C D Number of Contacts 6 24 ---------- 11.5 24.5 7 24 ---------- 11.5 24.5 8 24 ---------- 11.5 24.5 16 32 28.4 14.2 32.5 20 44 40.4 20.2 44.5 22 44 40.4 20.2 44.5 24 44 40.4 20.2 44.5 Note: 1,000 pieces per reel. 22 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Reel Dimensions (Common to All Types) End portion Mounting portion Lead portion (400mm min.) Embossed carrier tape Blank portion Top cover tape Blank portion (10 pockets min.) (10 pockets min.) BRecommended Temperature Profile HRS test conditions Solder method :Reflow, IR/hot air (Nihon Den-netsu Co., Ltd.’s Part Number: SENSBY NR-2) Environment: :Room air Solder composition :Paste, 63%Sn/37%Pb (Senju Metal Industry, Co., Ltd.’s Part Number: OZ63-201C-50-9) Test board :Glass epoxy 40mm∞80mm∞1.6mm thick Land dimensions :Top and bottom contact type 0.3mm∞1.3mm Vertical mounting type 0.6mm∞1.5mm Metal mask :Top and bottom contact type 0.25mm∞1.3mm∞0.15mm thick Vertical mounting type 0.5mm∞1.5mm∞0.15mm thick This temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. 23 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BFH12 Series FPC/FFC Construction (Recommended Specifications) 1. FFC FFC : Flexible Flat Cable Material Name Material Thickness (µm) Hard copper foil with tin plating 35 Adhesive Polyester type 30 Polyester 12 Adhesive Polyester type 30 Stiffener Polyester type 188 (Note) Total 295 *Real tolerance of thickness dimension is on the order of ±20 µm (275 to 315 µm) Note: Use of a thicker FFC results in a stiffer lock action and the lock is more easily released. A factor that contributes to thicker FFC is the use of 250 µm stiffener which is thicker than the standard (188 µm) product. This results in a total thickness of 357 µm. When using FFC, control of FFC thickness becomes easy if you indicate to us the thickness of the stiffener. 2. FPC FPC : Flexible Printed Circuit Material Name Material Thickness (µm) Covering layer film Polyamide 1 mil 25 Cover adhesive 25 Surface treatment Tin-lead 5 Copper foil Cu 1oz 35 Base adhesive 25 Base film Polyamide 1 mil 25 Reinforcement material adhesive Heat-hardened adhesive 30 Stiffener Polyamide 7 mil 175 Total 295 3. Precautions 1. This specification is a recommendation for the construction of the FH12 Series FPC and FFC (t=0.3 ±0.05). 2. For details about the construction, please contact the FPC/FFC manufacturers. 24