HIROSE ELECTRIC USA, INC. FX1-144P-1.27DS(71)

1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 ■Features Sequence Structure Figure 2 (Pin contact sequence) 1. High density and space saved-DIN Duplex Mount Achieved The alignment of the mating area in 4-row allows to duplex the number of contacts in the nearly equivalent mount square as for C2 the conventional DIN connector.(Refer to photo (1).) C1 B2 2. High Current and High Voltage B1 Two-thirds of total contact numbers are used for half pitch A2 A1 signaling contact, while the other one-third thereof is used for the power ground contact. Power ground contact corresponds to high current (1A) and high voltage (250V). 3. Sequence Structure Considering insertion/extraction in active power mode and maintenance on the end user side, the FX1 series is designed in a mechanism that can afford the time different contact at two steps. (For details, refer to Figure (2) as shown on the right.) C2 C1 B2 B1 A2 A1 4. Mis-insertion Prevent Provide the insertion guide on both ends of connector, and widen an inductive area in order to prevent mis-insertion. *FX1 Series (2 step sequence) 1 Row B 2 Row A, row C Setting row B to ground, if active cable insertion and extraction are performed as power supply, arc will occur between contact and contact. The row B contact structure is constructed to separate arc occurrence point a and normal contact point b, and minimizes affects on the contact. A78 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 10 2.2 2.8 1 (Contact start position) 1.8 2.5 (Effective contact length) 13.69 24.4 FX1 Series●1.27mm Pitch Connector ■Product Specifications Current rating Voltage rating Signal Contact: 0.5A Signal Contact: 125V AC Operating Temperature Range-55 to 85ç (Note 1) Storage Temperature Range -10 to +60ç(Note 2) Rating Power Supply Contact: 1A Power Supply Contact: 250V AC Operating Humidity Range -40 to 80% Operating Humidity Range -40 to 70% (Note 2) Item Specification Condition 1. Insulation Resistance 1000M ohms min. 250V DC 1 minute Signal contact 300V AC 2. Withstanding Voltage No flashover or insulation breakdown. Power supply contact 600V AC 3. Contact Resistance 60m ohms max. (conductor resistance included) 100mA 4. Vibration No electrical discontinuity of 1μs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. Contact resistance: 70m ohms max. 5. Humidity (Steady state) 96 hours at temperature of 40ç and humidity of 90% to 95% Insulation resistance: 1000M ohms min. Contact resistance: 70m ohms max. (-55ç: 30 minutes→15- to 35ç: 5 minutes max.→ 6. Temperature Cycle Insulation resistance: 1000M ohms min. (-85ç: 30 minutes→15- to 35ç: 5 minutes max.) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 70 m ohms max. 500 cycles Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. ■Material ●FX1 Series Parts Material Finish Remarks Header PPS Insulator Black UL94V-0 PPS/ PTB Receptacle Straight header Brass Contact area:Tin plated ________ Contact Right angle header Phosphor bronze Lead area:Tin plated Phosphor bronze Receptacle ________ Prefixed pin Phosphor bronze Tin plated A79 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FX1 Series●1.27mm Pitch Connector ■Ordering Information ●FX1 Series FX1 - 192 P - 1.27 DSA L qewrty q Series Name : FX1 r Contact pitch: 1.27mm w Number of contacts: 144, 192, 216 t Contact type: DS : Right angle e Connector type : P-header DSA : Straight : S-receptacle y L: Board prefixed pin Note: The cleaning type only is applied on the header side to FX1 series. BApplication Pattern A80 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FX1 Series●1.27mm Pitch Connector FX1 Series ■Receptacle : Right Angle Type BPCB mounting pattern Applicable board thickness t=1.6mm Unit: mm Part Number CL No. Number of Contacts A B C D RoHS ____ FX1-144S-1.27DS(71) 571-0003-7-71 144 73.29 68.08 59.69 FX1-144S-1.27DSL(71) 571-0053-5-71 67.31 ____ FX1-192S-1.27DS(71) 571-0004-0-71 YES 192 93.61 88.4 80.01 FX1-192S-1.27DSL(71) 571-0054-8-71 87.63 ____ FX1-216S-1.27DS(71) 571-0005-2-71 216 103.77 98.56 90.17 FX1-216S-1.27DSL(71) 571-0055-0-71 97.79 A81 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FX1 Series●1.27mm Pitch Connector ■Header : Straight Type BPCB mounting pattern Applicable board thickness t=1.6mm Unit: mm Part Number CL No. Number of Contacts A B C RoHS ____ FX1-144P-1.27DSA(71) 571-0303-0-71 144 73.29 59.69 FX1-144P-1.27DSAL(71) 571-0353-9-71 69.85 ____ FX1-192P-1.27DSA(71) 571-0304-3-71 YES 192 93.61 80.01 FX1-192P-1.27DSAL(71) 571-0354-1-71 90.17 ____ FX1-216P-1.27DSA(71) 571-0305-6-71 216 103.77 90.17 100.33 FX1-216P-1.27DSAL(71) 571-0355-4-71 A82 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FX1 Series●1.27mm Pitch Connector ■Header : Right Angle Type BPCB mounting pattern Applicable board thickness t=1.6mm Part Number CL No. Number of Contacts RoHS FX1-144P-1.27DS(71) 571-0203-6-71 144 YES FX1-144P-1.27DSL(71) 571-0253-4-71 A83 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FX1 Series●1.27mm Pitch Connector BPrecautions 1. Soldering (1)In the case of manual soldering, complete services under the condition of soldering iron bit temperature below 360ç for 5 seconds max. Please be sure to coat the contacts with solder so that no force is given. (2)In the case of dip soldering bath, complete service under the condition of soldering iron bit temperature below 260ç for 10 seconds max. 2. Prefixed function If the prefixed function is required, please use to the board prefixed pin type. A84 Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.