HIROSE ELECTRIC USA, INC. FX12B-24S-0.4SV(30)

0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding FX12 Series Dual Shields (when mated) [Patented Design] =ZVYZg"h^YZh]^ZaY GZXZeiVXaZ"h^YZh]^ZaY BZiVa[^ii^c\h Fig.1 ■Features Effective Shielding 1. Dual shields Built-in shield plates and metal fittings in the plugs and receptacles prevent electromagnetic emission and external interference on the entire 360° periphery of mated connectors. (Fig.1, 2) 2. Low-Profile A board-to-board distance of 1.5mm combined Without shield plates with reduced mounting areas allow for use in With shield plates space-limited applications. (Fig.3) Frequency (GHz) 3. Self alignment Built-in self-alignment feature in the plug and Fig.2 receptacle allows mating / un-mating in limited spaces. (Fig.4) Low-Profile, Space-Saving with Reduced Connector Footprint 4. Consistent mated retention force (Shown 24-Position – fully mated) Indents in the shield plates and contact configuration assure consistent, mated retention forces regardless of the number of contacts. A positive, tactile "click" confirms the fully mated state. 5. Solder wicking prevention Nickel plating barrier on the contacts prevents solder compound intrusion (wicking) into the contact engagement areas. 6. High contact reliability The narrow female contacts have a curved shape Fig.3 that acts like a spring, producing a long wipe length during mating and results in high contact reliability. Self Alignment of 0.3 mm 7. Pick-and-Place automatic mounting friendly Receptacle The compact, double shielded structure still provides enough area for vacuum pick-up machines when used in automated mounting methods. Receptacle: 0.8mm Header: 0.8mm 8. RoHS Compliant All materials and substances used to produce this product comply with RoHS standards. Plug Fig.4 In cases where the application will demand a high level of reliability, such as automotive, 1 2015.8e please contact a company representative for further information. Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Emitted Noise Level (dBm) FX12 Series●0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding ■Product Specifications Storage temperature range Current rating 0.3A Operating temperature range -10ç to +60ç (Note 2) Rating Voltage rating 30V AC -55ç to +85ç (Note 1) Storage humidity range Relative humidity 95% max. (No condensation) Item Specification Conditions 1.Insulation resistance 50Mş min. 100V DC 2.Withstanding voltage No flashover or insulation breakdown. 100V AC/one minute 3.Contact resistance 100mş max. 100mA No electrical discontinuity of 1µs or more. Frequency: 10 to 55 Hz, single amplitude of 4.Vibration resistance No damage, cracks or parts dislocation. 0.75mm, 3 axis, 10 cycles 2 Acceleration of 490m/s , 11ms duration, No electrical discontinuity of 1µs or more. 5.Shock resistance sine half-wave waveform, 3 cycles / each of No damage, cracks or parts dislocation. 3 axis directions Contact resistance: 120mş max. 6.Humidity resistance Insulation resistance: 25Mş min. 96 hours at 40ç, 90% to 95% R.H. No damage, cracks or parts dislocation. Temperature: -55ç → +15ç to 35ç → Contact resistance: 120mş max. +85ç → +15ç to +35ç 7.Temperature cycle Insulation resistance: 50Mş min. Time: 30 → 2 to 3 → 30 → 2 to 3 (Minutes) No damage, cracks or parts dislocation. 5 cycles Contact resistance: 120mş max. 8. Mating Cycles 30 cycles No damage, cracks or parts dislocation. 9. Resistance to No deformation of components affecting Reflow: At the recommended temperature profile soldering heat performance. Manual soldering: 360ç for 5 seconds Note 1 : Includes temperature rise caused by current flow. Note 2 : The term “storage” refers to products stored for long periods of time prior to mounting and use. Operating temperature range and humidity range includes non-conducting condition of installed connectors in storage, shipment or during transportation. ■Materials / Finish Part Material Finish Remarks Insulator Polyamide Color: Black UL94V-0 Header Engagement Area: Gold Plated of 0.1µm Contacts ------- Receptacle Termination Area: Flash Plated Phosphor bronze Ground plates Flash plated ------- Metal fittings Tin plated ------- ■Product Number Structure FX12 B - 24 P - 0.4 SV (**) qw e r t y u Series name : FX12 Connector type q r w Configuration P : Header B : Without guide post S : Receptacle e Number of contacts : 24, 40, 60 t Contact pitch : 0.4 mm y Mounting style SV : SMT Blank : Embossed tape packing (3,000 pcs/reel) u ( 30 ) : Embossed tape packing (100 pcs/reel) 2 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FX12 Series●0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding ■Header A±0.12 B±0.1 P=0.4±0.06 (0.15) (0.3) C±0.3 B Recommended PCB Layout and Metal Mask Dimensions Recommended metal mask thickness: 0.12 mm G A±0.12 B 0.4 0.23±0.02 (Land pattern ) 0.4±0.02 (Land pattern) G0.04 0.2±0.02 (Metal mask) 0.35±0.02 (Metal mask) Notes: 1 1 Positions marked indicate a ground circuit connections. 2 The co-planarity of SMT terminations is 0.1 maximum. 3 No polarity orientation for board mounting. 4 Dimensions in parentheses ( ) are reference dimensions. 0 D –0.1 5 All dimensions in mm. +0.1 E 0 Part No. HRS No. No. of Contacts AB C D E RoHS FX12B-24P-0.4SV(**) 573-1005-0 ** 24 5.4 4.4 10.6 09.1 11.0 FX12B-40P-0.4SV(**) 573-1001-0 ** 40 8.6 7.6 13.8 12.3 14.2 Yes FX12B-60P-0.4SV(**) 573-1007-6 ** 60 12.6 11.6 17.79 16.3 18.2 Blank : Embossed tape packing (3,000 pcs/reel) ( 30 ) : Embossed tape packing (100 pcs/reel) ■Receptacle A±0.12 B±0.1 P=0.4±0.06 (0.15) (0.3) C±0.3 B Recommended PCB Layout and Metal Mask Dimensions Recommended metal mask thickness: 0.12 mm G A±0.12 B 0.4 0.23±0.02 (Land pattern) 0.4±0.02 (Land pattern) Notes: G0.04 0.2±0.02 (Metal mask) 0.35±0.02 (Metal mask) 1 Positions marked indicate a ground circuit connections. 2 The co-planarity of SMT terminations is 0.1 maximum. 3 No polarity orientation for board mounting. 4 Do NOT place any components within area indicated by the broken line . 5 Do NOT place conductive traces in areas indicated by . 0 D –0.1 1 +0.1 E 0 6 Dimensions in parentheses ( ) are reference dimensions. 4 F MIN. 7 All dimensions in mm. Part No. HRS No. No. of Contacts AB C D E F RoHS FX12B-24S-0.4SV(**) 573-1006-3 ** 24 5.4 4.4 8.14 6.6 08.5 11.1 FX12B-40S-0.4SV(**) 573-1002-2 ** 40 8.6 7.6 11.34 9.8 11.7 14.3 Yes FX12B-60S-0.4SV(**) 573-1008-9 ** 60 12.6 11.6 15.34 13.8 15.7 18.3 Blank : Embossed tape packing (3,000 pcs/reel) ( 30 ) : Embossed tape packing (100 pcs/reel) 3 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. +0.05 4.6 0 0 3.04 –0.05 0 2.76 –0.05 +0.05 +0.1 5.2 0 1 (Land pattern) 0 0 3.8 0.9±0.02 (Metal mask) –0.05 0 3.4 –0.05 +0.1 1 0 (Land pattern) 0.9±0.02 (Metal mask) 5 0 2 –0.1 4 5.3 MIN. 1.34±0.3 4.9±0.2 1.2±0.3 4.2±0.2 (0.1) (0.1) FX12 Series●0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding Embossed Carrier Tape and Reel Dimensions ●Header ●Reel dimensions ' 8 &'¤%#& &#, %#* )¤%#& '¤%#& %#( JcgZZa^c\Y^gZXi^dc Part No. AB C FX12B-24P-0.4SV(**) 11.5 24.0 24.4 FX12B-40P-0.4SV(**) FX12B-60P-0.4SV(**) 14.2 32.0 32.4 All dimensions in mm Embossed Carrier Tape and Reel Dimensions ●Receptacle ●Reel dimensions ' 8 &#, %#* &'¤%#& )¤%#& '¤%#& %#( JcgZZa^c\Y^gZXi^dc Part No. AB C FX12B-24S-0.4SV(**) FX12B-40S-0.4SV(**) 11.5 24.0 24.4 FX12B-60S-0.4SV(**) All dimensions in mm 4 %#& ¢&#* % %#& ¢&#* % ¢&(¤%#* ¢&(¤%#* Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 6¤%#& &#,*¤%#& 6¤%#& &#,*¤%#& 7¤%#( 7¤%#( ¢(-% ¢(-% ¢-% ¢-% FX12 Series●0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding BRecommended solder temperature profile. The temperature profile indicates the maximum temperature of the connector surfaces at the highest point from the PCB mounting surface. MAX 250ç < > HRS test conditions 260 Solder method :Reflow 240 Environment :Room air 220ç 220 Solder paste :96.5%Sn/3.0%Ag/0.5%Cu 200ç 200 Test board : Glass epoxy 180 40mm∞30mm∞1mm thick 160 Metal mask :0.12mm thick 150ç 140 Reflow cycles :2cycles Note 1 : The temperature profiles shown are based on the above conditions. 0 (90~120sec.) (MAX 60sec.) Time (Seconds) Note 2 : In individual applications the actual Preheating (150 to 200 ) Soldering ç temperature may very, depending on (220 ) ç min solder paste type, volume / thickness and board size/ thickness. Note 3 : Cosult your solder paste and equipment manufacture for specific recommendations. BWashing Conditions Organic solvent Washing Solvent type Room temperature washing Heated washing IPA (Isoporopyl alcohol) Yes Yes Water Type Washing When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. Be careful that parts are not left with moisture remaining on them. Washing Precautions Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed. 5 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Temperature (ç) FX12 Series●0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding BHandling Precautions when mating mounted connectors. MAX 0.3 MAX 0.3 FX12*-**S-0.4SV Start the engagement of the connectors within the specified self- alignment range of 0.3 mm, while keeping the boards parallel to each other. FX12*-**P-0.4SV Fig.1 Do NOT start mating of the mounted connectors at an angle. Correctly position the connectors over each other and assure that both boards are parallel to each other. Incorrect Incorrect When the connectors are correctly aligned (and both boards are parallel to each other) apply even force until full mating is confirmed by the “click” sensation. When the connectors are mounted on the FPC, care should taken to prevent the mated connectors from bending Caution or twisting on the FPC. The device case or cushioning material should be used to keep the connectors fully mated and supported. BHandling Precautions when un-mating Keep the boards (with mounted connectors) parallel to each other. If parallel disconnection is impossible, start un-mating at one end, exercising extreme caution to apply force at the center of the connector itself, away from the solder joint rows (Ref. Fig A and Fig. B) Incorrect Fig. A Fig. B Do NOT start disconnection at the sides as the connector can be damaged, voiding the warranty and making the re-engagement impossible. Incorrect 6 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (0.5mm) (0.5mm) FX12 Series●0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding BTechnical Documentation ● Eye Pattern Output Waveform ● Shielding Characteristics (1) (Measurement Results Using a 2-Chamber Shielded Room) 60 Sample 1 50 Sample 2 40 Sample 3 30 20 10 0 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.5 2 3 Frequency (GHz) Explanatory Note Measurement values of the unshielded connectors were set as the zero level of the vertical axis of the graph. The graph uses unshielded connectors as the reference and indicates the noise leakage suppression (shielding) effect of the shielded connectors as a relative comparison value. In comparison to the unshielded connectors there was a noise suppression effect of 10 dB to 30 dB over the frequency range of 100 MHz to 3 GHz. ● Shielding Characteristics (2) (Board-to-Board Shielding Comparison Using a Magnetic Field Probe Method: IEC 61967-6 Compliance) [dBμ A/m] 125.00 122.50 120.00 117.50 115.00 112.50 110.00 107.50 105.00 102.50 100.00 With shielding Without shielding Explanatory Note A signal of the 266 MHz operating frequency was transmitted through all contacts, over a frequency range of 10 MHz to 3 GHz. The magnetic field leaking to the surroundings from the gap between the boards was measured with a magnetic probe to provide the (mapping data) results. 7 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Shielding Effect (dB) FX12 Series●0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding USA: USA: USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE 2688 Westhills Court, Simi Valley, CA 93065-6235 3255 Scott Boulevard, Building 7, Suite 101 580 Waters Edge Lane, Suite 205 Lombard IL Phone : +1-805-522-7958 Santa Clara, CA 95054 60148 Fax : +1-805-522-3217 Phone : +1-408-253-9640 Phone : +1-630-282-6701 http://www.hirose.com/us/ Fax : +1-408-253-9641 Mail : inquiries@hirose.com http://www.hirose.com/us/ http://www.hirose.com/us/ USA: THE NETHERLANDS: GERMANY: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) HIROSE ELECTRIC EUROPE B.V. HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH 17197 N. Laurel Park Drive, Suite 253, Livonia, Hogehillweg #8 1101 CC Amsterdam Z-O Herzog-Carl-Strasse 4 D-73760 Ostfildern MI 48152 Phone : +31-20-6557460 (Scharnhauser Park) Phone : +1-734-542-9963 Fax : +31-20-6557469 Phone : +49-711-4560-02-1 Fax : +1-734-542-9964 http://www.hirose.com/eu/ Fax : +49-711-4560-02-299 http://www.hirose.com/us/ http://www.hirose.com/eu/ GERMANY: GERMANY: FRANCE: HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Muggenhofer Str. 136 90429 Nuernberg Bayernstr. 3, Haus C 30855 Langenhagen, Germany Regus La Garenne Colombes,Place de La Belgique, Phone : +49-911 32 68 89 63 Phone : +49-511 97 82 61 30 71 Boulevard National La Garenne Colombes, 92250, France Fax : +49-911 32 68 89 69 Fax : +49-511 97 82 61 35 Phone : +33 (0) 1 7082 3170 http://www.hirose.com/eu/ http://www.hirose.com/eu/ Fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ UNITED KINGDOM: CHINA: CHINA: HIROSE ELECTRIC EUROPE BV (UK BRANCH) HIROSE ELECTRIC (SHANGHAI) CO., LTD. HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH 4 Newton Court, Kelvin Drive, Knowlhill, 1601, Henderson Metropolitan, NO.300, East Nanjing A1001, Ocean International Center, Building 56# East 4th Milton Keynes, MK5 8NH Road, Huangpu District, Shanghai, China 200001 Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +44-1908 202050 Phone : +86-21-6391-3355 Phone : +86-10-5165-9332 Fax : +44-1908 202058 Fax : +86-21-6391-3335 Fax : +86-10-5908-1381 http://www.hirose.com/eu/ http://www.hirose.com/cn/ http://www.hirose.com/cn/ CHINA: HONG KONG: TAIWAN: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377 Phone : +86-755-8207-0851 Phone : +852-2803-5338 Fax : +886-2-2555-7350 Fax : +86-755-8207-0873 Fax : +852-2591-6560 http://www.hirose.com/tw/ http://www.hirose.com/cn/ http://www.hirose.com/hk/ KOREA: SINGAPORE: INDIA: HIROSE KOREA CO., LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE 250, Huimanggongwon-ro, Siheung-si, 10 Anson Road #26-16, International Plaza Office NO.519, Regus-Green Boulevard, Level5, Tower C, Gyeonggi-do, Korea, 429-849 079903, Singapore Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Phone : +82-31-496-7000,7124 Phone : +65-6324-6113 Phone : +91-12-660-8018 65-6324-6123 Fax : +82-31-496-7100 Fax : + Fax : +91-120-4804949 http://www.hirose.co.kr/ http://www.hirose.com/sg/ http://www.hirose.com/sg/ INDIA: MALAYSIA: THAILAND: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 1-10-07, Suntech @ Penang Cybercity (1164),Lintang BANGKOK OFFICE (REPRESENTATIVE OFFICE) Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Phone : +91-80-4120 1907 Phone : +604-619-2564 Road, Yannawa, Sathorn, Bangkok 10120 Thailand Fax : +91-80-4120 9908 Fax : +604-619-2574 Phone : +66-2-686-1255 http://www.hirose.com/sg/ http://www.hirose.com/sg/ Fax : +66-2-686-3433 http://www.hirose.com/sg/ ® 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN + + TEL: 81-45-620-3526 Fax: 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. 8 The contents of this catalog are current as of date of 08/2015. Contents are subject to change without notice for the purpose of improvements. Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.