Manufacturers
HIROSE ELECTRIC USA, INC. HIF3FC-16PA-2.54DS(71)
Description
Conn Shrouded Header HDR 16 POS 2.54mm Solder RA Thru-Hole Tray
Part Number
HIF3FC-16PA-2.54DS(71)
Price
Request Quote
Manufacturer
HIROSE ELECTRIC USA, INC.
Lead Time
Request Quote
Category
Connectors » Connector Headers and PCB Receptacles
Specifications
Manufacturer
Hirose Electric USA, Inc.
Manufacturers Part #
HIF3FC-16PA-2.54DS(71)
Lead Time
12 Week Lead Time
Industry Aliases
HIF3FC-16PA-2.54DS(71)
Sub-Category
Connector Headers and PCB Receptacles
Brand
HIROSE
Packaging
Tray
Factory Pack Quantity
1
Datasheet
Extracted Text
2.54mm Pitch Low Profile Connector HIF3FB and HIF3FC Series ■Features 1. Flux Prevention HIF3FC series straight type takes complete flux tight measures. 2. Low Profile The pin header is a low profile of height 9.2mm. The board to board clearance is 12.2mm for stacking connection. ■Applications Computers, termination equipment, various kinds of electronic equipment, Office Automation machines and so on Photo: HIF3FC Series ■Product Specifications Current rating: 1A Operating Temperature Range: -55 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Rating Voltage rating: 200V AC Operating Humidity Range: 40 to 80% Operating Humidity Range: 40 to 70% (Note 2) Item Specification Condition 1. Insulation Resistance 1000M ohms 500V DC 2. Withstanding Voltage No flashover or insulation breakdown. 650V AC/1 minute. 3. Contact Resistance 15m ohms max. 0.1A 4. Vibration No electrical discontinuity of 1μs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) 96 hours at temperature of 40ç and humidity of 90% to 95% Insulation resistance: 1000M ohms min (-55ç: 30 minutes→15 to 35ç: 5 minutes max.→ 6. Temperature Cycle No damage, cracks, or parts looseness. 85ç: 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 15 m ohms max. 500 cycles Solder bath: 260ç for 10 seconds 8. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 350ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. ■Material Parts Material Finish Remarks Insulator PBT Black UL94V-0 Pin header Brass Contact area : Gold plated ________ Contact Receptacle Copper alloy Termination area : Pure tin plated ■Ordering Information q Series Name : HIF3FB (60, 64 contacts) r A: Selective gold plating HIF3FC- * P A - 2.54 DSA : HIF3FC (10~50 contacts) t Contact pitch: 2.54mm q wr e t y w Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 y Contact type e P : Pin header DSA : Straight type D : Socket DS : Right angle type B47 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HIF3FB and HIF3FC Series●2.54mm Pitch Low Profile Connector ■Straight Type Pin Header Note 1: Two types of 50 contacts are available. Please use products according to the table as shown below. Note 2: The number of polarizing key mounted positions differs according to products. Please refer to the table as shown below. Note 3: The 10 contact type has no standoff at the center. Note 4: * indicates the number of contacts. Unit: mm Part Number CL No. Number of Contacts A B C D (Note 1) Polarizing Key Mounted Position(Note 2) RoHS HIF3FC -10PA-2.54DSA(71) 616-0161-4-71 10 20.2 17.5 10.16 4.1 None HIF3FC -14PA-2.54DSA(71) 616-0162-7-71 14 25.28 22.58 15.24 4.1 1 point on the left side 616-0163-0-71 16 27.82 25.12 17.78 4.1 HIF3FC -16PA-2.54DSA(71) HIF3FC -20PA-2.54DSA(71) 616-0164-2-71 20 32.9 30.2 22.86 4.1 HIF3FC -26PA-2.54DSA(71) 616-0165-5-71 26 40.52 37.82 30.48 4.1 YES HIF3FC -30PA-2.54DSA(71) 616-0166-8-71 30 45.6 42.9 35.56 4.1 1 point on the right and left sides, respectively HIF3FC -34PA-2.54DSA(71) 616-0167-0-71 34 50.68 47.98 40.64 4.1 HIF3FC -40PA-2.54DSA(71) 616-0168-3-71 40 58.30 55.60 48.26 4.1 616-0169-6-71 50 71.0 68.3 60.96 4.1 HIF3FC -50PA-2.54DSA(71) HIF3FCA-50PA-2.54DSA(71) 616-0170-5-71 50 71.0 68.3 60.96 26.96 Note 1: Two types are available. Please use them according to the table as shown below. Unit: mm Part Number CL No. Number of Contacts A B C D (Note 1) Polarizing Key Mounted Position RoHS HIF3FB -60PA-2.54DSA(71) 616-0130-0-71 60 83.7 81.0 73.66 4.1 HIF3FBA -60PA-2.54DSA(71) 616-0142-0-71 60 83.7 81.0 73.66 26.96 1 point on the right and left YES sides, respectively HIF3FB -64PA-2.54DSA(71) 616-0131-3-71 64 88.78 86.1 78.74 4.1 616-0143-2-71 64 88.78 86.1 78.74 26.96 HIF3FBA -64PA-2.54DSA(71) B48 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HIF3FB and HIF3FC Series●2.54mm Pitch Low Profile Connector ■Right Angle Type Pin Header Note 1: Two types of 50 contacts are available. Please use products according to the table as shown below. Note 2: The number of polarizing key mounted positions differs according to products. Please refer to the table as shown below. Note 3: The 10 contact type has no standoff at the center. Note 4: * indicates the number of contacts. Unit: mm Part Number CL No. Number of Contacts A B C D (Note 1) Polarizing Key Mounted Position(Note 2) RoHS HIF3FC -10PA-2.54DS(71) 616-0061-0-71 10 20.2 17.5 10.16 4.1 None 616-0062-2-71 14 25.28 22.58 15.24 4.1 1 point on the left side HIF3FC -14PA-2.54DS(71) HIF3FC -16PA-2.54DS(71) 616-0063-5-71 16 27.82 25.12 17.78 4.1 HIF3FC -20PA-2.54DS(71) 616-0064-8-71 20 32.9 30.2 22.86 4.1 HIF3FC -26PA-2.54DS(71) 616-0065-0-71 26 40.52 37.82 30.48 4.1 YES HIF3FC -30PA-2.54DS(71) 616-0066-3-71 30 45.6 42.9 35.56 4.1 1 point on the right and left sides, respectively HIF3FC -34PA-2.54DS(71) 616-0067-6-71 34 50.68 47.98 40.64 4.1 616-0068-9-71 40 58.30 55.60 48.26 4.1 HIF3FC -40PA-2.54DS(71) HIF3FC -50PA-2.54DS(71) 616-0069-1-71 50 71.0 68.3 60.96 4.1 HIF3FCA-50PA-2.54DS(71) 616-0070-0-71 50 71.0 68.3 60.96 26.96 Note 1: Two types are available. Please use them according to the table as shown below. Unit: mm Part Number CL No. Number of Contacts A B C D (Note 1) Polarizing Key Mounted Position RoHS HIF3FB -60PA-2.54DS(71) 616-0030-6-71 60 83.7 81.0 73.66 4.1 HIF3FBA -60PA-2.54DS(71) 616-0042-5-71 60 83.7 81.0 73.66 26.96 1 point on the right and left YES sides, respectively HIF3FB -64PA-2.54DS(71) 616-0031-9-71 64 88.78 86.1 78.74 4.1 616-0043-8-71 64 88.78 86.1 78.74 26.96 HIF3FBA -64PA-2.54DS(71) B49 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HIF3FB and HIF3FC Series●2.54mm Pitch Low Profile Connector ■Straight Type Receptacle Unit: mm A B Polarizing Key Mounted Position RoHS Part Number CL No. Number of Contacts HIF3FB-10DA-2.54DSA(71) 10 17.27 10.16 None 616-0201-7-71 HIF3FB-16DA-2.54DSA(71) 616-0203-2-71 16 24.89 17.78 HIF3FB-20DA-2.54DSA(71) 616-0204-5-71 20 29.97 22.86 HIF3FB-26DA-2.54DSA(71) 616-0205-8-71 26 37.59 30.48 HIF3FB-30DA-2.54DSA(71) 616-0206-0-71 30 42.67 35.56 YES 1 point on the right and left sides, respectively HIF3FB-34DA-2.54DSA(71) 616-0207-3-71 34 47.75 40.64 HIF3FB-40DA-2.54DSA(71) 616-0208-6-71 40 55.37 48.26 HIF3FB-50DA-2.54DSA(71) 616-0209-9-71 50 68.07 60.96 HIF3FB-60DA-2.54DSA(71) 616-0210-8-71 60 80.77 73.66 Note 1: Standoff number differs according to products. Note 2: The polarizing key number differs according to products. B50 Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the HIF3FC-16PA-2.54DS(71)?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Conn Wire to Board F 8 POS 0.8mm Solder RA SMD Reel
Conn Wire to Board RCP 18 POS 0.8mm Solder RA SMD Reel
Conn Unshrouded Header HDR 10 POS 2.54mm Solder RA Thru-Hole Bag
Conn Unshrouded Header HDR 10 POS 2.54mm Solder ST Thru-Hole
Conn Wire to Board M 9 POS 2.54mm Solder ST Thru-Hole
Conn Unshrouded Header HDR 12 POS 2.54mm Solder RA Thru-Hole Tray
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods