HIROSE ELECTRIC USA, INC. HIF4A-24P-3.18DSA(01)

Ribbon Cable Connector HIF4 Series ■Features 1. Current Capacity The HIF4 series connector is capable of 3 A current capacity used for wider applications, while the HIF3 series uses 1 A capacity. 2. Full Lock Mechanism This connector is equipped with a Hirose original locking mechanism, and guarantees excellent reliability for vibration and shock. 3. One-touch Insertion and Extraction Mechanism This connector is equipped with levers for automatic insertion and extraction, as soon as lock is reset. Insertion and extraction tools are not required. 4. Applicable Cable The applicable cable is UL2651 AWG#24 flat cable (7 cores./0.203mm, jacket dia :1.0 to 1.2mm). ■Applications Computers, terminal equipment, various kinds of electronic equipment, and office automation machines ■Product Specifications ( ) ( ) Current rating : 3A Operating Temperature Range : –55 to +85ç Note 1 Storage Temperature Range : –10 to +60ç Note 2 Rating ( ) Voltage rating : 300V AC Operating Moisture Range : 40 to 80% Storage Humidity Range : 40 to 70% Note 2 Item Specification Condition 1. Insulation Resistance 1000M ohms min 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 1000V AC/1 minute 3. Contact Resistance 15m ohms max 0.1A 4. Vibration No electrical discontinuity of 1μs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% (-65ç: 30 minutes ➝ 15 to 35ç: 5 minutes max. 6. Temperature Cycle No damage, cracks, or parts looseness. 125ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.) 5 cycles 7. Operating Life Contact resistance: 15m ohms max. 500 cycles Solder bath: 260ç for 10 seconds 8. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 360ç for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for a specific part number shown. Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside. ■Material Part Material Finish Remarks Insulator PBT Black UL94V-0 Socket Beryllium copper Gold plated over nickel underplating Contact ––––––– Pin header Phosphor bronze Gold plated over nickel underplating B2 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HIF4 Series●Ribbon Cable Connector ■Ordering Information ●Pin Header HIF4 - * * P - 3.18 DS qewr t q Series Name : HIF4 w Number of Contacts : 16, 20, 26, 34, 40 e Contact alignment : P : Pin header r Contact Pitch : 3.18mm t Contact Type DS : Right angle type SA : Straight dip type W : Wrapping type ●Socket HIF4 - * * D - 3.18 R qewr t q Series Name : HIF4 w Number of Contacts : 16, 20, 26, 34, 40 e Contact alignment : D : Double r Contact Pitch : 3.18mm t Connection type : Ribbon cable B3 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HIF4 Series●Ribbon Cable Connector ■Socket Unit:mm Part Number CL No. Number of Contacts A B C RoHS HIF4-16D-3.18R 563-0025-5 16 31.98 22.26 26.28 HIF4-20D-3.18R 563-0010-8 20 38.34 28.62 32.64 HIF4-26D-3.18R 563-0011-0 26 47.88 38.16 42.18 YES HIF4-34D-3.18R 563-0012-3 34 60.60 50.88 54.90 HIF4-40D-3.18R 563-0029-6 40 70.14 60.42 64.44 ■Pin Header Right Angle Type Unit:mm Part Number CL No. Number of Contacts A B C D E F RoHS 42.82 HIF4-16P-3.18DS 563-0026-8 16 46.68 32.18 22.26 39.98 33.58 63.28 49.18 HIF4-20P-3.18DS 563-0001-7 20 53.04 38.54 28.62 46.34 39.94 69.64 58.72 HIF4-26P-3.18DS 563-0002-0 26 62.58 48.08 38.16 55.88 49.48 YES 79.18 71.44 HIF4-34P-3.18DS 563-0003-2 34 75.30 60.80 50.88 68.60 62.20 91.90 80.89 HIF4-40P-3.18DS 563-0030-5 40 84.84 70.34 60.42 78.14 71.74 101.44 B4 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HIF4 Series●Ribbon Cable Connector ■Pin Header Straight Through hole Type Unit:mm Part Number CL No. Number of Contacts A B C D E F RoHS 42.82 HIF4-16P-3.18DSA 563-0027-0 16 46.68 32.18 22.26 39.98 33.58 63.28 49.18 HIF4-20P-3.18DSA 563-0004-5 20 53.04 38.54 28.62 46.34 39.94 69.64 58.72 HIF4-26P-3.18DSA 563-0005-8 26 62.58 48.08 38.16 55.88 49.48 YES 79.18 71.44 HIF4-34P-3.18DSA 563-0006-0 34 75.30 60.80 50.88 68.60 62.20 91.90 80.98 HIF4-40P-3.18DSA 563-0031-8 40 84.84 70.34 60.42 78.14 71.74 101.44 ■Pin Header Wrapping Type Unit:mm Part Number CL No. Number of Contacts A B C D E F RoHS 42.82 HIF4-16P-3.18W 563-0028-3 16 46.68 32.18 22.26 39.98 33.58 63.28 49.18 HIF4-20P-3.18W 563-0007-3 20 53.04 38.54 28.62 46.34 39.94 69.64 58.72 HIF4-26P-3.18W 563-0008-6 26 62.58 48.04 38.16 55.88 49.48 YES 79.18 71.44 HIF4-34P-3.18W 563-0009-9 34 75.30 60.80 50.88 68.60 62.20 91.90 80.98 HIF4-40P-3.18W 563-0032-0 40 84.84 70.34 60.42 78.14 71.74 101.44 B5 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HIF4 Series●Ribbon Cable Connector BPCB mounting pattern ●Pin Header Right Angle Type Number of Contacts A B 16 22.26 33.58 20 28.62 39.94 26 38.16 49.48 34 50.88 62.20 40 60.42 71.74 ●Pin Header Straight Through hole Type or Pin Header Wrapping Type Number of Contacts A B 16 22.26 39.98 20 28.62 46.34 26 38.16 55.88 34 50.88 68.60 40 60.42 78.14 ●Type Shape DS type DSA type W type B6 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HIF4 Series●Ribbon Cable Connector As shown below in Figure 1, contact positions are BHIF4 Basic Connection Method indicated by marks (K●◆◆). Fig.1 The connected contact is indicated with a symbol next to the individual type name. However, the contact symbol connected to the cable mark is indicated at the mark *. Type AB Type AO Type A side Type B side * K mark and K mark K mark and ● mark Type BO Type AD A side D side * K mark and K mark K mark and ● mark Type CO Type CD C side D side * K mark and K mark K mark and ● mark Type DO B7 M ■ M ■ M ■ Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HIF4 Series●Ribbon Cable Connector Contact positions are designated with marks as shown below. According to the illustration on the left, the illustration 1 indicates these positions on the right. Note 1: Cable length tolerance 500 +10, 0 max. (mm) 500 +3%, 0% min. Note 2.When a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. If connection failure has occurred, consult HRS Sales Department. Type AC A side C side * K mark and K mark K mark and K mark Type CC C side C side * K mark and K mark K mark and K mark Type AA A side A side * K mark and K mark K mark and K mark B8 Powered by TCPDF (www.tcpdf.org) M M M M M M Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.