The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 3.5mm Pitch Miniature Double Row Connector for Secondary Power (Product Compliant to UL/CSA Standard) MDF6 Series Features 1. Pitch 3.5mm Miniature Type This is a space saving miniature connector where the adjacent contact pitch is set to 3.5mm and the opposite length is set to 5mm double-row alignment. Inner type full lock 2. Current Capacity Secures 7A Despite miniature power connector, the current capacity 7A is secured using the AWG No.16 cable. 3. Box Type Header The box type header secures scoop-proof insertion, and perfectly prevents mis-insertion. 4. Inner Type Full Lock Adopted Adopting the inner type full lock which the locking area is not exposed to the outside, the connector can be engaged under the high reliable and stable conditions. Applications Secondary power units for various equipment Mis-insertion protector B111 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Product Specifications AWG#16 : 7A ( ) Note2 Operating Temperature Range -30 to +85ç Current rating AWG#18 : 6A Operating Moisture Range -40 to 80% Cable Size (Note1) Rating AWG#20 : 5A (Note3) Storage Temperature Range -10 to +60ç AWG#22 : 4A (Note3) Storage Moisture Range -40 to 70% Voltage rating 300V AC UL CSA Safety Standard File No. Standard Value Applicant to the UL CSA Safety Standard UL :E52653 AWG#16 to #18 : 6A CSA :LR95109 Current rating Cable Size Rating AWG#20 to #22 : 4A Voltage rating 30V AC Item Specification Condition 1. Insulation Resistance 1000M ohms min 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 1500V AC/1 minute 3. Contact Resistance 30m ohms max 100mA 4. Single Insertor/Extraction Force 0.4N(40gf) min., 4.9N(500gf) max. Measured at the steel pin with 1.52∞0.76±0.002mm 5. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 500M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% (-55ç: 30 minutes ➝ 5 to 35ç: 10 minutes 7. Temperature Cycle Contact resistance: 30m ohms max:Insulation resistance: 1000M ohms min. (-85ç: 30 minutes ➝ 5 to 35ç: 10 minutes) 5 cycles 8. Durability (Mating/un-mating) Contact resistance: 30m ohms 30 cycles Flow: 250ç for 10 seconds 9. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: The rated current will be changed according to applicable cable sizes. The header rating only is 7A. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Material Product Part Material Treatment Remarks Crimping Socket Insulator Polyamide resin White (Natural) UL94V-0 Crimping Contact for Socket Contact Phosphor copper Tin plated ––––– Insulator Polyamide resin White (Natural) UL94V-0 Pin Header Contact Brass Tin plated ––––– Ordering Information ConnectorContact MDF6 - 1618 - SCF MDF6 - * DS - 3.5 C qewr t qw q Series Name : MDF 6 r Contact Pitch : 3.5mm q Applicable Cable Size w Packaging Type w Number of Contacts : 4 to 20 t Contact type 1618 : AWG#16 to #18 SCF : Socket Contact, Reel e Connector Type C : Crimping socket 2022 : AWG#20 to #22 SC : Socket Contact, Bag DS : Double row socket DSA: Straight dip DP : Double row pin header DS : Right angle dip B112 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Double Row Socket Photo: Connected State Unit: mm Part Number CL No. Number of ContactsAB C MDF6- 4DS-3.5C 547-0074-1 4 10.5 8.1 3.5 MDF6- 6DS-3.5C 547-0075-4 6 14.0 11.6 7.0 MDF6- 8DS-3.5C 547-0076-7 8 17.5 15.1 10.5 MDF6-10DS-3.5C 547-0077-0 10 21.0 18.6 14.0 MDF6-12DS-3.5C 547-0078-2 12 24.5 22.1 17.5 MDF6-14DS-3.5C 547-0079-5 14 28.0 25.6 21.0 MDF6-16DS-3.5C 547-0080-4 16 31.5 29.1 24.5 MDF6-18DS-3.5C 547-0081-7 18 35.0 32.6 28.0 MDF6-20DS-3.5C 547-0082-0 20 38.5 36.1 31.5 Note: A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. Socket Crimping contact Applicable Cable (Tin plating Annealed Copper Wire) Conductor Size (Wire construction) Jacket Diameter ( ) AWG #16 26cores/0.254mm ( ) AWG #18 34cores/0.18 mm Ø2.5 to Ø2.0mm ( ) AWG #20 21cores/0.18 mm ( ) AWG #22 17cores/0.16 mm Ø1.9 to Ø1.5mm Note: If other cables are used instead of the applicable cable, please contact Hirose sales department. Recommended CableStrip Length UL1061, UL1007 2.7 to 4.4mm Applicable Cable Packaging Type Quantity Part Number CL No. AWG Size Jacket Diameter MDF6-1618SCF 547-0070-0 Reel 5000 #16 to #18 2.5 to 2.0 MDF6-1618SC 547-0071-3 Bag 100 MDF6-2022SCF 547-0072-6 Reel 5000 #20 to #22 1.9 to 1.5 MDF6-2022SC 547-0073-9 Bag 100 BApplicable Crimping Tool Type Part Number CL No. Applicable Contact Main press unit CM105 901-0005-4 ----------------- AP105-MDF6-1618S 901-4512-4 MDF6-1618SCF Applicator AP105-MDF6-2022S 901-4513-7 MDF6-2022SCF MDF6-TA1618HC 550-0203-5 MDF6-1618SC Manual Crimping Tool MDF6-TA2022HC 550-0204-8 MDF6-2022SC ( ) ( ) Extraction Tool DF-C-PO A 550-0170-8 MDF6-****SC F Note: If any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products. B113 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Double Row Pin Header: Straight Type +0.1 Board Hole Diameter : Ø1.3 +0 Applicable Board Thickness: 1.6±0.2 Unit: mm Number of Contacts Part Number CL No. A B MDF6- 4DP-3.5DSA 547-0083-2 4 10.5 3.5 MDF6- 6DP-3.5DSA 547-0084-5 6 14 7 MDF6- 8DP-3.5DSA 547-0085-8 8 17.5 10.5 MDF6-10DP-3.5DSA 547-0086-0 10 21 14 MDF6-12DP-3.5DSA 547-0087-3 12 24.5 17.5 MDF6-14DP-3.5DSA 547-0088-6 14 28 21 MDF6-16DP-3.5DSA 547-0089-9 16 31.5 24.5 MDF6-18DP-3.5DSA 547-0090-8 18 35 28 MDF6-20DP-3.5DSA 547-0091-0 20 38.5 31.5 Note1: A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. Double Row Pin Header: Right Angle Type +0.1 Board Hole Diameter : Ø1.3 +0 Applicable Board Thickness : 1.6±0.2 Unit: mm Part Number CL No. Number of Contacts A B MDF6- 4DP-3.5DS 547-0270-0 4 10.5 3.5 MDF6- 6DP-3.5DS 547-0271-2 6 14 7 MDF6- 8DP-3.5DS 547-0272-5 8 17.5 10.5 MDF6-10DP-3.5DS 547-0273-8 10 21 14 Note1: A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. B114 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BApplication Pattern BPrecautions 1. Recommended Soldering Condition Flow: 250ç for 3 seconds Manual soldering: 290ç for 2 seconds 2. Cleaning Condition Refer to the "Nylon Connector Use Hand book". 3. Connection Condition Refer to the "Nylon Connector Use Hand book". 4. CautionsThe color phase of this product is slightly different from that of the formed product according to the manufacturing lot and future storage conditions, but the difference doesn't affect the performance. B115