Subminiature, LAN Modular Jack Connectors TM11R-5M2 Series ■Features 24 1.Fast Ethernet Support 16 21 Conforms to the TIA/EIA-568-A data wiring standard and meets requirements of CAT5 transmission performance for 1,2-3,6 conductor pairs. As such, these products fully support Fast Ethernet (100BASE-TX) transmission. Other series 2. Subminiature Design Contributes to Saving TM21R--5C--88--LP Space in the Equipment 17.5 Having built-in optical indicators, with height of only 15 14.5 11.5mm, width of 15mm and depth of 17.5mm the connectors can be used in extremely limited spaces. 3. Built-in Optical Indicators Optical indicators are integral part of the connectors help TM11R--5M2--88--LP saving space on customer’s board. Compared with LED type indicators, they do not emit any Space saving electrical noise. 4. EMI protection Metal shield covers the outer surfaces of the connectors housing LED optical indicators are taking place assuring complete protection against electromagnetic interference. Built-in multiple shield and ground contacts assure reliable connection with the mounting panel as well as with the mating connectors. 5. Environmental considerations Plating is lead-free in order to protect environment. 6. FCC Standards EMI protection Meets requirements of FCC Title 47, Part 68, Subpart F. ■Applications Telecom Hubs, Routers, Bridges and ATM Transmission Equipment, Ethernet Switches and Networking Equipment, Test and Measurement Equipment, Medical Diagnostic Built-in LED type Built-in Optical pipe type Equipment. (Possibility of electromagnetic (No electromagnetic noise emission and interference.) noise emission.) 2012.6 1 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 11.5 13.4 TM11R-5M2 Series●Subminiature, LAN Modular Jack Connectors ■Product Specifications Current rating 1A Rating Operating temperature range : -25 to +80 (Note) ç ç Voltage rating 125 V AC Item Specification Conditions 1. Insulation resistance 100 M ohms min. 100 V DC 2. Dielectric Withstanding Voltage No flashover or insulation breakdown 500 V AC applied for one minute (between adjacent contacts) 3. Withstanding voltage No flashover or insulation breakdown 1500 V AC / one minute (between contact and shield) 4. Contact resistance 230 m ohms max. 100mA Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, No electrical discontinuity of 5 μ sec. or more. 5. Vibration Contact resistance: 250m ohms max. 2 hours / 3 axis 2 Acceleration of 490 m/s , 11 ms duration, No electrical discontinuity of 5 μ sec. or more. 6. Shock Contact resistance: 250m ohms max. sine half-wave waveform, 3 cycles in each of the 3 axis 7. Durability Contact resistance: 250m ohms max. 200 cycles (mating/un-mating) Temperature: -55ç/+15ç to +35ç/+85ç/+15ç to +35ç Contact resistance: 250 m ohms max. Duration: 30/2 to 3/30/2 to 3(Minutes) 8. Temperature cycle Insulation resistance: 100 M ohms min. 5 cycles Contact resistance: 250 m ohms max. Insulation resistance: 1 M ohms min. (High humidity) 9. Humidity 500 hours at temperature of 40ç and humidity of 90% to 95% Insulation resistance: 10 M ohms min. (Dry state) 10. Salt Spray Contact resistance: 250 m ohms max. Exposed to density 5% salt water for 48 hours Note :Includes temperature rise caused by current flow. ■Materials Part Material Finish Remarks Insulator PBT Color: Black UL94V-0 Contact area: Gold plating Contact Copper alloy ------- Termination area: Tin alloy plating Optical pipe Polycarbonate Color: Transparent UL94V-0 Shield Copper alloy Tin plating ------- ■Ordering information Jacks ● TM11 R - 5M2 - 8 8 - LP 1 2 3 4 5 6 1 Series name TM11 Series 2 Connector type R: Jack 3 Jack type 5M2: PCB Right-angle through hole type 4 Jack opening code 8: 8 contacts 5 Number of inserted contacts 8: 8 contact 6 Optical pipe LP: With optical pipe inserted Blank: Without optical pipe 2 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. TM11R-5M2 Series●Subminiature, LAN Modular Jack Connectors ■Modular Jack Connectors Supporting CAT5e (for 1,2-3,6 pair) Single Port With Built-in Optical Pipe 14.5 ● ( 4.25 ) 15 Contact No. 8 Contact No. 1 (2) 0.3 0.45 0.25 1 11.4 5.55 3.1 14.75 11.25 17.5 0.8 0.8 Part Number CL No. RoHS TM11R-5M2-88-LP 222-2905-0 YES TM11R--5M2 1 PC Contact No. 8 Contact No. 1 11.1 Contact No. 7 Contact No. 2 Single Port Without Optical Pipe ● 14.5 (4.25) 15 Contact No. 8 Contact No. 1 (2) 0.3 0.45 0.25 1 11.4 5.55 3.1 14.75 0.8 0.8 Part Number CL No. RoHS TM11R-5M2-88 222-2906-2 YES Contact No. 8 Contact No. 1 Contact No. 7 Contact No. 2 3 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (4.25) (4.25) 3 2.54 3 2.54 3.1 3.6 11.5 3.1 3.6 11.5 (4.25) (4.25) 0.6 11.5 0.8 0.6 11.5 0.8 1.7 TM11R-5M2 Series●Subminiature, LAN Modular Jack Connectors BRecommended PCB mounting patterns With Built-in Optical Pipe Without Optical Pipe ● ● 11.1 8.89 6.35 8.89 3.81 6.35 LED location area 1.27 3.81 LED light emission area 1 No conductive traces Contact No. 1.27 11.4MAX 1 No conductive traces Contact No. 8-Ø1 8-Ø1 11.4 MAX 7531 7 5 3 1 8 6 4 2 8 6 4 2 2-Ø1.6 2-Ø1.6 2-Ø2.4 2 2 2-Ø2.4 No conductive & No conductive & 11.4 Printed board edge ground traces 11.4MIN 11.4 ground traces 11.4MIN Printed board 14.75 edge Connector front edge 18.1MIN 14.75 18.1MIN Connector front edge 4 Suggested LEDs LED light emitting center 2.7 MAX 1.5 MAX *Recommendations for PCB Design 1 Areas indicated should be free of conductive traces. Area indicated should be free of conductive & ground traces. 2 Recommended board thickness: 1.6mm. 3 To assure that the indicator light pipes operates correctly the LED’s must be installed directly on the PCB, within 4 recommended dimensions and with light emitting center in upward direction. Contact applicable manufacturer for LED specification. BPanel Cutout For Both Types, With and Without Built-in Optical Pipe ● (33) Lock lever 1 3±1 TM21P--88P 15.4 1 4.5MIN PCB mounting surface Panel side 1 Connector front surface 0 1 2 -0.7 3.1MAX *Recommendations for Panel Design 5.55 1 The shield contacts should connect with the panel cut-out on all sides. Note: IPA cleaning at room temperature is recommended for the cleaning of this product. When an aqueous cleaning agent is to be used, there is a concern that the light pipe (made of polycarbonate resin) may change color; therefore, please make a selection based on a table showing the effects on the resin. These tables are issued by the various manufacturers of cleaning agents. 4 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 11.25 3.1 2.54 0.3 3.2MAX 3.1MAX 12 5MIN 1 1MIN 2MIN 3.1 2.54 3.1MAX 5MIN 2MIN TM11R-5M2 Series●Subminiature, LAN Modular Jack Connectors BCAT5 Transmission Characteristics Data For fully mated receptacle (TM11R-5M2-88-LP) and plug (TM21P-88P). Signal Attenuation ● 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 Frequency(MHz) 1,2 3,6 CAT5 Spec Near-End Crosstalk (NEXT) ● 90 80 70 60 50 40 30 20 10 0 0 20 40 60 80 100 Frequency(MHz) 1,2-3,6 CAT5 Spec Return Loss ● 80 70 60 50 40 30 20 10 0 0 20 40 60 80 100 Frequency(MHz) 1,2 3,6 CAT5 Spec 5 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Return Loss(dB) Attenuation(dB) NEXT(dB) TM11R-5M2 Series●Subminiature, LAN Modular Jack Connectors GUIDANCE FOR MODULAR CONNECTORS ■Modular Connector Terminal Numbers Unless otherwise specified, see the figures below for the terminal numbers of the product. Plug Jack (mating face) Contact Contact Contact Contact No.8 No.1 No.1 No.8 ■Attention to Plug Mating Use only plugs conforming to FCC standards. FCC PLUG DIMENSIONS Please pay particular attention to dimensions shown right. ■Opening Size and Number of Conductors(6-Conductor) See the figures below for the relationship between the opening size and the number of conductors of the jack connectors. Model 62 Model 66 Model 64 Models 64 and 62 are obtained by removing 1 pin and 2 pins, respectively, from both sides of model 66.For details, please contact us for drawings because only standard models are shown in the catalogs. ■Recommended Soldering for Modular Dip Connectors ●Flow solder (automatic soldering machine) Pre-heat : 90 - 130ç Pre-heat time : 120 seconds maximum Solder temperature : 240 - 260ç Soldering time : 10 seconds maximum ●Hand soldering Soldering iron tip temperature : 350ç Soldering temperature : 5seconds maximum Soldering iron output : 30 - 40W Note: When soldering, use care not to apply excessive force to the connector terminals. ●Recommended Solder composition: Paste, 96.5%Sn/3.0%Ag/0.5%Cu ® 6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 06/2012. Contents are subject to change without notice for the purpose of improvements. 6 Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 5.89 - 6.15