RJ45 Modular Jack Connectors with Pulse Transformers TM11RD - 5TANA Series Pulse Transformer Circuit Diagram Insulated transformer Choke coil TD+ 1 CT 3 1 TX+ TX- 2 2 TX- RD+ 7 3 RX+ CT 6 4 RD- 8 5 6 RX- 4 7 GRAND 5 8 Circuit RJ45 PCB ■Features RJ11 (6 position) plug insertion prevention 1. Pulse Transformers Support FastEthernet Equipped with built-in insulation transformers and common mode choke coils, withstanding voltage of 1.5 kV and supporting 100Base-Tx and 10Base-T. Outline of mating plug 2. Incorrect Plug Insertion Prevention Key A built-in key offers protection against insertion of 6- conductor type modular plug. 3. Built-in optical indicators Optical indicators are integral part of the connectors, saving space on the board. There is no emission of any electrical noise. Incorrect Plug Insertion Prevention Key 4. EMI protection Metal shield covers the outer surfaces of the connectors assuring complete protection against electromagnetic interference. 5. FCC standards Meets requirements of FCC Title 47, Part 68, Subpart F. Built-in optical indicators 6. Environmental considerations Plating compounds are lead-free. ■Applications Light pipe Notebook PC's, telecommunication hubs, routers, bridges and ATM transmission equipment, Ethernet switches and networking equipment, office equipment, test and measurement equipment. * Light colors are determined by the color of LED's used. 2006.8 1 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ■Product Specifications Voltage rating 125V AC Operating temperature range: -25ç to +80ç (Note) Ratings Item Specification Conditions Connector 1.Insertion resistance -2dB min. 1 to 65MHz 2.Insulation resistance 100M ohms min. 100V DC Basic terminal between 123-45-768 500V AC / one minute 3.Withstanding voltage No flashover or insulation breakdown. Primary (RJ45 side) to secondary (PCB side) 1500V AC / one minute Terminal to shield 1500V AC / one minute Pulse transformer 4.Insertion resistance -1dB min. 1 to 65MHz -20 dB max. 1 to 10 MHz -16 dB max. 10 to 30 MHz 5.Return loss -12 dB max. 30 to 60 MHz -10 dB max. 60 to 80 MHz 6.Inductance 350μH min. 0.1V 100KHz 8mADC , , -40 dB max. 1 to 30 MHz 7.Cross talk -35 dB max. 30 to 60 MHz (Reference) -30 dB max. 60 to 100 MHz 8.Common mode rejection ratio -30 dB max. 1 to 50 MHz (Reference) -20 dB max. 50 to 150 MHz Note: Includes temperature rise caused by current flow. ■Materials Component Material Finish/Color Remarks Insulator Black UL94V-0 PBT Contact area : Gold plated Contacts Copper alloy Termination area: Tin plated Shield Copper alloy Tin plated Incorrect insertion prevention key Stainless Pulse transformer ---------- ---------- Optical pipe Polycarbonate Clear UL94V--0 ■Ordering information 1 Series name : TM11 Connector type R: Jack 2 3 Direction of locking lever D: Down (mating plug) Jack suffix number : 5 4 TM11 R D - 5 T A NA - A - 8 8 - LP 5 Transformer T: With transformer 1 2 3 4 5 6 7 8 9 10 6 Transformer type A: Transformer circuit type 7 Incorrect insertion prevention key NA-A: With built-in key 8 Jack opening code 8: 8 contacts 9 Number of inserted contacts 8: 8 contacts 10 Optical pipe LP: With optical pipe inserted Blank: Without optical pipe 2 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ■Modular Jack Connectors (With built-in optical pipe) 16 21.3 Contact No.1 Contact No.8 Contact No.1 Contact No.8 10.8 0.3 0.48 15.75 24.2 17.5 Part Number CL No. RoHS TM11RD-5TANA-A-88-LP CL222-2936-3 YES BRecommended PCB mounting pattern Suggested dimensions of LEDs 4 20.75MIN 11.43 LED light emitting center No conductive traces 10.75MAX Printed board edge Ø3.25 2.7MAX 1.5MAX 7 5 3 1 Ø1.63 8 6 4 2 8-Ø0.9 1.27 LED center position 8.89 5 11.6 15.75 BPulse Transformer Circuit Diagram TD+ 1 1 TX+ CT 3 TD-22 TX- 1CT:1CT RD+73 RX+ CT 6 RD-86 RX- 1CT:1CT 4 75ø 75ø 75ø 4 5 7 0.001μF 75ø CHS GROUND58 ●Precautions 1 Hirose Electric did not check the compatibility with the PHY chip. When replacing other manufacturers jack it is recommended to verify the compatibility with the actual equipment. 2 This connector is mounted on the board using wave or manual soldering. Do not use reflow soldering. 3 Recommended board thickness: 1.6mm 4 To assure correct operation of the indicator light pipes LED's must be installed directly on the PCB, within recommended dimensions and with light emitting center in upward direction. 5 Mount the LED so that the center of the light emitting center aligns with the center point as dimensioned on the Recommended PCB mounting pattern above. 6 Verify the actual LED's mounting pattern with it's manufacturer, then add it to the PCB mounting pattern, assuring the correct placement of the center point. 7 IPA cleaning at room temperature is recommended for the cleaning of this product. When an aqueous cleaning agent is to be used, there is a concern that the light pipe (made of polycarbonate resin) may change color; therefore, please make a selection based on a table showing the effects on the resin.These tables are issued by the various manufacturers of cleaning agents. 3 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Board side 7.4 12.7 2.54 6.2 5.55MIN 3.05 Cable side 13.6 3.2MAX 1.6 3.18 3.56 ■Modular Jack Connectors (Without built-in optical pipe) 16 21.3 Contact No.1 Contact No.8 Contact No.1 Contact No.8 0.48 10.8 0.3 15.75 17.5 Part Number CL No. RoHS TM11RD-5TANA-A-88 CL222-2932-2 YES BRecommended PCB mounting pattern 20.75MIN 11.43 No conductive traces 10.75MAX Printed board edge Ø3.25 7 5 3 1 Ø1.63 8 6 4 2 8-Ø0.9 1.27 8.89 15.75 BPulse Transformer Circuit Diagram TD+ 1 1 TX+ CT 3 TD-22 1CT:1CT TX- RD+73 RX+ CT 6 RD-86 RX- 1CT:1CT 4 75ø 75ø 75ø 4 5 7 0.001μF 75ø CHS GROUND58 Precautions ● 1 Hirose Electric did not check the compatibility with the PHY chip. When replacing other manufacturers jacks it is recommended to verify the compatibility with the actual equipment. 2 This connector is mounted on the board using wave or manual soldering.Do not use reflow soldering. 3 Recommended board thickness: 1.6mm 4 IPA cleaning at room temperature is recommended for the cleaning of this product. When an aqueous cleaning agent is to be used, there is a concern that the light pipe (made of polycarbonate resin) may change color; therefore, please make a selection based on a table showing the effects on the resin.These tables are issued by the various manufacturers of cleaning agents. 4 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Board side 2.54 6.2 7.4 5.55MIN 3.05 Cable side 13.6 1.6 3.18 3.56 ■Technical Data Measurement results of electrical characteristics Insertion Loss ● Insertion Loss MHz Network analyzer 0 10 20 30 40 50 60 70 80 0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 Pulse transformer section -2 Reflection Loss ● Reflection MHz Network analyzer 0 10 20 30 40 50 60 70 80 0 -10 -20 -30 -40 -50 -60 -70 Pulse transformer section -80 Crosstalk (Reference) ● Cross Talk MHz Network analyzer 0 10 20 30 40 50 60 70 80 90 100 0 -10 -20 -30 -40 -50 -60 -70 Pulse transformer section -80 -90 -100 Common Mode Rejection Ratio (Reference Value) ● CMRR MHz Network analyzer 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 -10 -20 -30 -40 -50 -60 Pulse transformer section -70 -80 5 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. dB dB dB dB NOTES : GERMANY: THE NETHERLANDS: USA: HIROSE ELECTRIC GmbH HIROSE ELECTRIC EUROPE B.V. HIROSE ELECTRIC(U.S.A.), INC. Herzog-Carl-Strasse 4 D-73760 Ostfildern Beechavenue 46,1119 PV 2688 Westhills Court, Simi Valley, CA 93065-6235 (Scharnhauser Park) Schiphol-Rijk Phone : 1 805 522 7958 Phone : 49 711 4560 02 1 Phone : 31 20 6557490 Fax : 1 805 522 3217 Fax : 49 711 4560 02 299 Fax : 31 20 6557469 http://www.hiroseusa.com http://www.hirose.de http://www.hiroseeurope.com UNITED KINGDOM: CHINA: KOREA: HIROSE ELECTRIC UK LTD. HIROSE KOREA CO., LTD. HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD. Crownhill Business Centre 22 Vincent Avenue 3705-6,Bund Center,222 Yan An Road(E),Shanghai 200002 (#2NA311,Shihwa Industrial Complex), Crownhill, Milton Keynes MK8 OAB Phone : 86 21 6335 2538 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : 44 1908 305400 Phone : 82 31 496 7000,7124 Fax : 86 21 6335 0767 Fax : 44 1908 305401 http://www.hirose-china.com.cn Fax : 82 31 496 7100 http://www.hirose.co.uk http://www.hirose.co.kr HONG KONG: SINGAPORE: TAIWAN: HIROSE ELECTRIC CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD. HIROSE ELECTRIC CO., LTD. Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha 10 Anson Road #34-13 International Plaza 079903 No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei Tsui East, Kowloon Phone : 65 6324 6113 Phone : 886 2 2557 7351,7352 65 6324 6123 Phone : 852 2803 5338 Fax : 886 2 2552 9851 Fax : http://www.hirose-singapore.com.sg Fax : 852 2591 6560 http://www.hirose-taiwan.com.tw http://www.hirose-hongkong.com.hk ® 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements. 6 Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.