Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM21P Series (Shielded Type) TM22P-88P (Non-shielded Type) ■Features 1. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B data wiring standard, meeting transmission performance of Enhanced Category 5. Protected latch tab Supports Gigabit Ethernet (1000BASE-T) and Fast Ethernet (100BASE-TX) high-speed LAN transmission. 2. EMI protection (TM21*P-88P) 360° coverage of the engagement area with a metal shield assures protection against electromagnetic interference. When mated with corresponding connector the shield surfaces are securely connected to provide continuous circuit. 3. Protected latch tab (TM21P-88P) Flexible case extends over the release tab preventing the possibility of breaking-off during handling of the complete cable assembly. 4. Termination of conductors 1 Self located 24 AWG conductors (solid or stranded) are terminated against pre-inserted contacts using simple tooling. 5. Simplified termination (TM21*P-88P) 1 Removeable one piece cover allows easy access to 2 the termination areas. 6. Conforms to the ISO 8877 Standard (ISDN Interface Connector) 1 ■Applications Telecom Hubs, Routers, Bridges and ATM Transmission Equipment, Ethernet Switches and Networking Equipment, Test and Measurement Equipment and other equipment requiring this type of Cover Installation Procedure simple and reliable connection. 2008.12w 1 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards ■Product Specification Current rating 1A Rating Operating temperature range-25 to +60 (Note) ç ç Voltage rating 125 V AC Item Specification Conditions 1. Insulation resistance 100 M ohms min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown 500 V AC / one minute (between adjacent contacts) 3. Withstanding voltage No flashover or insulation breakdown 1500 V AC / one minute (between contact and shield) 4. Contact resistance 230 m ohms max. 100mA DC Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, No electrical discontinuity of 5 ms or more 5. Vibration Contact resistance: 250m ohms max. 2 hours / 3 axis 2 6. Shock Acceleration of 490 m/s , 11 ms duration, No electrical discontinuity of 5 ms. min. Contact resistance: 250m ohms max. sine half-wave waveform, 3 cycles in each of the 3 axis 7. Durability Contact resistance: 250m ohms max. 200 (mating/un-mating) Temperature: -55ç/+5ç to +35ç/+85ç/+5ç to +35ç 8. Temperature cycle Contact resistance: 250 m ohms max. Duration: 30/5/30/5(Minutes) Insulation resistance: 100 M ohms min. 5 cycles 9. Humidity Contact resistance: 250 m ohms max. Insulation resistance: 1 M ohms min. (High humidity) 500 hours at temperature of 40ç and humidity of 90% to 95% Insulation resistance: 10 M ohms min. (Dry state) 10. Salt Spray Contact resistance: 250 m ohms max. Exposed to density 5% salt water for 48 hours Note :Includes temperature rise caused by current flow. ■Materials Part Material Finish Remarks Insulator Polycarbonate Color: Clear UL94V-2 Contacts Copper alloy Contact area: Gold plating ------- Shield Copper alloy Tin plating ------- Conductor holding tray Polycarbonate Color: Clear UL94V-2 Cover Polyamide Color: Light beige (Note) UL94V-2 Note :Cover available in various colors. Refer to page 3. ■Ordering information Plugs- Shielded Plugs - Non-shielded ● ● TM21 C P - 8 8P TM22P - 8 8P 1 2 1 3 4 1 2 3 Series name TM21P: Shielded Series name TM22P : Non-shielded 1 1 Cover Type Size 8 : For 8 contacts 2 Blank: Protective latch cover 2 C: Short cover Inserted contacts 8P: 8 3 Size 8: For 8 contacts 3 Inserted contacts 8P: 8 4 2 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (R3.5) TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards ■Plug Connectors Shielded ● 6.7 Cover 30.2 17.5 29.5 Conductor holding tray Contact No. 1 Contact No.8 5.4 9.05 Part Number CL No. Cover Color RoHS TM21P-88P 222-2862-9-02 Light beige TM21P-88P(02) 222-2862-9-02 Medium gray TM21P-88P(03) 222-2862-9-03 Black TM21P-88P(04) 222-2862-9-04 Natural light gray ( ) TM21P-88P 05 222-2862-9-05 Red YES ( ) TM21P-88P 06 222-2862-9-06 Green ( ) TM21P-88P 07 222-2862-9-07 Blue TM21P-88P(08) 222-2862-9-08 Yellow TM21P-88P(09) 222-2862-9-09 Orange BCover installed BMated with corresponding receptacle (shown for reference only) (34) (13.4) (44.65) 3 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 6.6 6.09 (0.6) 12.9 11.7 (34) 16.6 9 3.45 TM21CP-8 TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards ■Plug Connectors Shielded-Short Cover ● 6.7 17.2 Cover 30.2 17.5 Conductor holding tray Contact No.8 Contact No.1 5.4 9.05 Part Number CL No. Cover color RoHS TM21CP-88P(03) 222-2884-1-03 Black YES Note: For other colors contact Hirose sales representative. BCover installed BMated with corresponding receptacle (shown for reference only) (21.7) (32.35) (13.4 ) BApplicable Shielded Cable Specifications Specifications Solid copper conductor: 0.5mm dia. Conductor Jacket Shield Stranded copper conductor: AWG#24 Insulation (Dia. 0.2mm x 7 pcs) Conductor ( ) Individual conductor insulation dia. 0.9mm to 1.0mm Drain wire AWG#26 (tin coated) Drain wire Overall jacket dia. (dia. 6.6mm) Note: For cable termination procedures refer to: [ ] [ ] TM21P-88P Cable Termination Procedure Manual (ETA-E2349) and TM21CP-88P Cable termination Procedure Manual (ETA-E2353). Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications recommendations. 4 (R3.5) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. TM21CP-8 6.6 6.09 (0.6) 12.9 11.7 (22.4) 10.4 9 TM21CP-8 TM21CP-8 3.45 TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards ■Plug Connectors Non-shielded ● 22.5 Conductor holding tray 5.4 9.05 Contact No.1 Contact No.8 Part Number CL No. RoHS TM22P-88P 222-2899-9 YES BMated with corresponding receptacle (shown for reference only) (11.85) BApplicable Non-shielded Cable Specifications Specifications Solid copper conductor: 0.5mm dia. Jacket Conductor Stranded copper conductor: AWG#24 (Dia. 0.2mm x 7 pcs) ( ) Individual conductor insulation dia. 0.9mm to 1.0mm Conductor Insulation Overall jacket dia. (dia. 5.4mm to 5.7mm) Note: For cable termination procedures refer to: [ ] TM22P-88P Cable Termination Procedure Manual (ETA-E2381). Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications recommendations. 5 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 14.2 7.9 (0.6) 6.6 6.09 11.7 3.45 TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards BHand termination tools For contact/conductor termination (For cable and shield crimping) ● Part Number CL No. Applicable connector TM21P-88P HT601 / TM21P-88P 902-2133-1 TM21CP-88P ●For contact/conductor termination (Non-shielded connectors) HRS marking side (For contact/conductor termination) A Reverse side (For cable strain relief clamp crimping) Part Number CL No. Applicable connector TM22P-88P HT601-TM23/22P-88P CL902-2128-1 TM23P-88P 6 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards BTechnical Documentation ●CAT5e Transmission Characteristics Data These are the representative values of the various transmission characteristics data for connector assemblies TM21P-88P and TM21R-5C-88-LP when fully mated. • Signal Attenuation 0.5 0.4 0.3 0.2 0.1 0 0102030405060708090 100 Frequency(MHz) 1,2 3,6 4,5 7,8 CAT5e Spec (Each two numbers are for the pair of individual contact position.) • Near-End Crosstalk Attenuation (NEXT) 120 100 80 60 40 20 0 0102030405060708090100 Frequency(MHz) 1,2-3,6 1,2-4,5 1,2-7,8 3,6-4,5 3,6-7,8 4,5-7,8 CAT5e Spec • Return Loss 80 60 40 20 0 0102030405060708090100 Frequency(MHz) 1,2 3,6 4,5 7,8 CAT5e Spec 7 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. NEXT(dB) Attenuation(dB) Return Loss(dB) TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards • Far-End Crosstalk Attenuation (FEXT) 120 100 80 60 40 20 0 0102030405060708090100 Frequency(MHz) 1,2-3,6 1,2-4,5 1,2-7,8 3,6-1,2 3,6-4,5 3,6-7,8 4,5-1,2 4,5-3,6 4,5-7,8 7,8-1,2 7,8-3,6 7,8-4,5 CAT-5e Spec (Each two numbers are for pair of individual contact position.) • Propagation Delay 3 2.5 2 1.5 1 0.5 0 0102030405060708090100 Frequency(MHz) 1,2 3,6 4,5 7,8 CAT5e Spec • Propagation Delay skew 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0102030405060708090100 Frequency(MHz) Measurement Value CAT5e Spec ® 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements. 8 Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FEXT(dB) Delay(ns) Delay Skew(ns)