CAT 6 Data Wiring System Connectors TM23 Series ■Features Permanent Link PSACR 1. High-Speed Data Transfer 100 90 Conforms to the TIA/EIA-568B.2-1 data Wiring standard, 80 thereby clears CAT 6 transfer performance requirements. 70 As such, these products easily support Gigabit Ethernet Measured value Measured value 60 (1000BASE-T/1000BASE-TX), which is the next 50 generation of high-speed applications. CAT 6 PSNEXT standard value CAT 6 PSNEXT standard value 40 2. A Product Lineup Focused on Building of a 30 Complete System 20 CAT 6 Attenuation standard value CAT 6 Attenuation standard value Measured value Measured value 10 In addition to modular plugs, Hirose Electric offers box 0 type outlets, patch panels, and wall outlets. Systems built 1 10 100 1000 using all components from the same manufacturer will Frequency (MHz) assure stable data transfer. 3. Support of a Wide Variety of Manufacturers' CAT 6 Cable To assure high performance of the system we test and monitor data transfer using CAT 6 cables manufactured by different suppliers. 2008.4w 1 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Attenuation/PSNEXT (dB) TM23 Series●CAT 6 Data Wiring System Connectors ■Plugs, Boots ■Specifications Current rating 1A Rating Operating temperature range -25ç to +60ç (Note) Voltage rating 125V AC Item Specification Conditions 1. Insulation resistance 100 M ohms min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown. 500 V AC / one minute (between adjacent contacts) 3. Contact resistance 230 m ohms max. 100mA No electrical discontinuity of 5μs min. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 4. Vibration Contact resistance : 250m ohms max. 1 octave/min. conduct, 10 cycles to each 3 directions. 2 No electrical discontinuity of 5μs. min. Acceleration of 490 m/s , 11 ms duration, sine half-wave 5. Shock Contact resistance : 250m ohms max. waveform, 3 cycles in each of the 6 axes. 6. Durability Contact resistance : 250m ohms max. 200 cycles (mating/un-mating) Temperature : -55±3ç ➝ +15ç to +35ç ➝ +85±2ç ➝ +15ç to +35ç Contact resistance : 250 m ohms max. +5 +5 7. Temperature cycle Duration (Minutes): 30 ➝ 2 to 3 ➝ 30 ➝ 2 to 3 0 0 Insulation resistance : 100 M ohms min. 5 cycles Contact resistance: 250 m ohms max. 8. Humidity Insulation resistance: 1 M ohms min. (High humidity) 500 hours at temperature of 40ç and humidity of 90% to 95%. Insulation resistance: 100 M ohms min. (Dry state) 9. Salt Spray Contact resistance: 250 m ohms max. 5% salt water/48 hours. Note: Includes temperature rise caused by current flow. ■Materials and Finishes Plugs Component Material Finish Remarks Insulator Polycarbonate Color: Clear UL94V-0 Contacts Phosphor bronze Contact area: Gold plated ------------------- Strain relief clamp Brass Nickel plated ------------------- Boots Component Material Finish Remarks White (Standard color) UL94V-0 Insulator EPTR Black, red, blue, yellow, green, orange, gray, light blue ------------------- ■Ordering Information Plugs Series name : TM23 ● 1 2 Connector type P : Plug TM23 - P - 8 8P 3 Size 8 : 8 contacts 1 2 3 4 4 Inserted contacts 8P : 8 contacts Boots 1 Series name : TM23 ● Connector type P : Plug 2 TM23 - P - 8 BT 3 Size 8 : 8 contacts 1 2 3 4 4 BT : Boot Jacks ● 1 Series name : TM23 2 Connector type R : Jack TM23 R - 5A 8 8 3 Mounting style/termination type 5A : Right-angle/through hole 1 2 3 4 5 4 Jack opening code 8 : For 8 contacts 5 Number of inserted contacts 8 : 8 contacts 2 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1 C6 TM23 Series●CAT 6 Data Wiring System Connectors ■Plugs BOverview . Contact configured for CAT 6 performance. . 0.5 mm dia. solid wire or AWG #24 stranded wire. . Use with cables having external diameters of 5.4 mm to 6.8mm. . Strain relief clamp protects the contact/conductor termination areas. Plug body Connector guide insert * (25) 24 5.4 10.05 (17.5) Strain relief clamp * Connecter guide insert (Shown inserted) Contact No. 1 Contact No. 8 17 10.05 6 TM23P-88P Part No. CL No. RoHS TM23P-88P 222-2916-6 YES BMated with corresponding receptacle (Shown for reference only) (15.45) * Supplied separately(1bag contains 1pcs.) 3 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 8.9 6.6 6.09 (12.9) 11.7 5.05 4.75 TM23P-8-BT 1 TM23 Series●CAT 6 Data Wiring System Connectors ■Boots BOverview . Dedicated boots for the TM23P-88P. . 9 color variations. . Halogen-free. . Protects the plug’s lock/release lever. 12 25.3 (12) (4) Part Number CL No. Color RoHS TM23P-8-BT(01) 222-2917-9-02 White TM23P-8-BT(01) 222-2917-9-01 Black TM23P-8-BT(02) 222-2917-9-02 Red TM23P-8-BT(03) 222-2917-9-03 Blue TM23P-8-BT(04) 222-2917-9-04 Yellow YES TM23P-8-BT(05) 222-2917-9-05 Green TM23P-8-BT(06) 222-2917-9-06 Orange TM23P-8-BT(07) 222-2917-9-07 Gray TM23P-8-BT(08) 222-2917-9-08 Light Blue BBoot installed Protected lock/release lever (40) TM23P-88P 4 Ø6.8 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Ø6.8MAX 10.8 8.8 (6.5) 10.8 13.4 (16.9) (17.2) TM23 Series●CAT 6 Data Wiring System Connectors ■Manual Termination Tool HRS marking side (For contact/conductor termination) A Reverse side (For cable strain relief clamp crimping) Part No. CL No. HT601-TM23/22P-88P 902-2128-1 * Changing the “A” Assembly parts to TM22 dedicated clamp parts will allow wiring of Hirose’s TM22P-88P plugs supporting CAT 5e. Automatic Contact Termination Machine ● Item Part Number CL No. Body CM-105 CL901-0005-4 AP105-TM23P-88P CL901-2588-5 Applicator Cable Strain Relief Clamp Crimping Jig (Manual operated) ● Part Number CL No. TM23P-88P/CK-MP(01) CL902-2130-3(01) ■Recommended Cable Specification Solid copper conductor: Jacket Filler 0.5mm dia. Conductor Conductor Stranded copper conductor: AWG#24 Individual conductor (0.95mm to 1.05mm) insulation dia. Insulation Overall jacket dia. (5.4mm to 6.8mm) Note: To achieve CAT 6 performance, refer to TM23P-88P Cable Termination Procedure Manual(ETAD-E2415). 5 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. TM23 Series●CAT 6 Data Wiring System Connectors ■Jacks BOverview . Unique contact structure designed for crosstalk reduction. . (Through hole : 3 rows) . Temporary retention to board with integral flexible posts. BPCB mounting pattern 15 15 13 7.112 5.08 8-Ø0.8 3.048 1.016 2-Ø2.4 8 4 1 7 5 2 Flexible post 6 3 0.43 0.35 15 Contact No. 8 Contact No. 1 Connector front edge Recommended board thickness: 1.6mm Part Number CL No. Color RoHS TM23R-5A-88(50) 222-2918-1-50 Black YES Note: The jack by itself does not clear CAT 6 performance requirements. Compensation on the board is required to secure CAT 6 performance. 6 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 6 14.5 1.3 2.54 4 3 2.1 6 1.3 4 2.54 TM23 Series●CAT 6 Data Wiring System Connectors ■ Precautions in System Construction The TM23 Series connector and components were designed for CAT 6 data transfer. However, it is highly recommended that the entire connected system be checked for this performance level. Cable termination procedures ● Cable termination procedure manual No. Part Number ETAD-E2415 TM23P-88P Recommended Cable Manufacturers ● Hirose Electric closely examines the transfer performance of these connectors with the CAT 6 cable that is manufactured and sold by the various cable manufacturers. Please use the cable from among those indicated in Table 1 for system construction with the TM23 Series. Table1 Recommended Cable Manufacturers Manufacturer's Name Web Site Hitachi Cable, Ltd. http://www.hitachi-cable.co.jp/index_e.html Tonichi Kyosan Cable, Ltd. http://www.tonichi-kyosan.co.jp/ NipponSeisen Co. Ltd. http://www.nscable.co.jp/ Okano Electric Wire Co., Ltd. http://www.okano-cable.co.jp/english/index.html Tsushin Kogyo K.K. http://www.tsuko.co.jp/ Showa Electric Wire & Cable Co., Ltd. http://www.swcc.co.jp/eng/index.html Fuji Electric Cable Co, Ltd. http://www.tokyo-fuji.co.jp/index_f.htm Note: Please see the web sites of the various manufacturers for cable specifications. Contact HRS for recommendations when using cables from other suppliers. Use of Different Manufacturers' Components ● Use of different manufacturers' components in one system could cause the deterioration of transfer performance. Check of the System Performance Verification ● All measures have been taken to assure the transfer performance of the TM23 series. However, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. Hirose Electric does not build wiring systems. Please contact Hirose Electric sales representative for system construction contractor information. 7 Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. TM23 Series●CAT 6 Data Wiring System Connectors ■ Technical Documentation CAT 6 Transmission Characteristics Data ● This is representative transfer performance for the TM23 Series. A high margin is used for CAT 6 standard values. . Permanent Links Permanent Link PSACR 100 Horizontal cable 90 m 90 80 70 Measured value Measured value TM23R-MPP24 TM23R-T01 60 50 Permanent link adapter (PM06) CAT 6 PSNEXT standard value CAT 6 PSNEXT standard value 40 30 20 CAT 6 Attenuation standard value CAT 6 Attenuation standard value Measured value Measured value 10 DSP4300 DSP4300 0 Main unit Remote unit 1 10 100 1000 Frequency (MHz) . Channel Links Horizontal cable 90 m Channel Link PSACR 100 90 TM23R-MPP24 TM23R-T01 80 70 Patch cable Stranded Measured value Measured value 5 m 60 wire 3 m ( :TM23P-88P) 50 Patch cable CAT 6 PSNEXT standard value CAT 6 PSNEXT standard value 2 m 40 Channel link 30 adapter 20 Measured value Measured value CAT 6 Attenuation standard value CAT 6 Attenuation standard value 10 0 1 10 100 1000 DSP4300 DSP4300 Frequency (MHz) Main unit Remote unit . Patch Cable Patch Cable 2 m Channel link adapter DSP4300 DSP4300 Main unit Remote unit Patch Cable 2 m NEXT Patch Cable 2 m RL 120 60 100 50 Measured value Measured value Measured value Measured value 80 40 60 30 CAT 6 NEXT standard value CAT 6 NEXT standard value 40 20 CAT 6 RL standard value CAT 6 RL standard value 20 10 0 0 1 10 100 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) ® 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements. 8 Powered by TCPDF (www.tcpdf.org) Jun.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. NEXT(dB) RL(dB) Attenuation/PSNEXT (dB) Attenuation/PSNEXT (dB)