MICRO SWITCH™ Premium Miniature Basic Switches V7 Series Datasheet MICRO SWITCH™ V7 Series Premium Miniature Basic Switches Honeywell’s MICRO SWITCH™ V7 miniature switches are designed for long term-reliability in a rugged switch packaged with a thermoplastic housing. These switches may be installed in a wide range of applications from simple or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies. The V7 switch is available as a pin plunger style or with optional integral or auxiliary levers to actuate the switch and offer versatility in the application. The switch requires as little as 0,15 Newtons [approximately ½ ounce] to operate for extremely sensitive applications or an operating force of almost 4 Newtons [14 ounces] where higher forces are required. The V7 switch can reliably control logic level electrical loads from less than 0.1 A to power duty switching up to 25 A. Agency certifications for the MICRO SWITCH™ V7 switches are provided through CSA, ENEC, and UL for global use around the world. What makes our switches better? Certified with CSA, ENEC, and UL for global acceptability Reliable snap-spring mechanism with more than 60 years of proven service Available with pin plungers, integral levers (fitted two posi- tions), or auxiliary levers to meet equipment requirements Electrical ratings from 0.1 A up to 25 A for design flexibility in one package size Big performance in a small package. COST OPTIMIZATION • RELIABILITY PERFORMANCE • GLOBAL ACCEPTANCE sensing.honeywell.com 2 ACTUATION ON TIME F Fe ea at tu ur re es s MICRO SWITCH™ V7 Series basic switches operate with forces as low a an nd d Be Ben ne efit fits s as 15 g and carry options to increase to 397 g, and can thereby easily accommodate different actuator mechanisms. Global acceptance: UL, CSA, ENEC RELIABLE PERFORMANCE IN HARSH CONDITIONS Switches feature industry-leading temperature ranges of -40 °C to 175 °C [-40 °F to 347 °F] to allow for years of reliable performance in harsh conditions. LONG LIFE CYCLE RATING The long life cycle rating (up to 10,000,000 cycles) reduces the need to replace switches over the life of OEM platform applications, therefore reducing total system cost. DESIGN FLEXIBILITY Available with pin plungers, integral levers (fitted 2 positions), and auxiliary levers to meet a variety of equipment requirements, MICRO SWITCH™ V7 Series switches also boast electrical ratings from 0.1 A up to 25 A for design flexibility in one package size. Potential Applications VENDING MACHINE MOTORS Switch controls motors or solenoids in vending machines for dispensing of product. MICROWAVE DOOR INTERLOCK Switch in door interlock of microwave that disconnects power if door opened. OVEN CLEANING LATCH Switch in door latch for oven clean operation. PRESSURE SWITCH ASSEMBLY Pressure switch senses incoming water pressure for power washer. sensing.honeywell.com 3 V7 Series PRODUCT NOMENCLATURE 7 — — V7 — 1 C 1 D8 C,F Electrical Rating Operating Circuitry Mounting/ Termination Style Lever Special A Switch Type North Europe D,F (Inches) B Force Code Construction Style Designator America (ENEC) V7 Series 150 °C Use only if this switch 5 A @ 0.187 x 0.02 Straight 3 A SPDT 150 g max. 2,9 mm [0.11 in] 1 A 1 has a special feature. 3 D8 002 125 Vac quick connect 22,1 mm [0.87 in] Miniature mtg. holes Could be any number. 150 °C 0.187 x 0.02 11 A @ Straight N 175 g max. 10 A SPNO 3,1 mm [0.12 in] quick connect B 2 4 E8 022 1 35,6 mm [1.4 in] 125 Vac mtg. holes spread 85 °C 15 A @ 0.250 x 0.032 Roller K __ P 225 g max. SPNC 2,9 mm [0.11 in] 3 1 C 7 D9 quick connect 201 125 Vac 20,6 mm [0.81 in] mtg. holes 85 °C 0.250 x 0.032 1 A @ Roller G 1 A 3,1 mm [0.12 in] 75 g max. quick connect D 8 E9 207 2 125 Vac 34,0 mm [1.34 in] mtg. holes spread 85 °C 10 A @ Sim. roller F Left angle H 5 A 2,9 mm [0.11 in] 3 50 g max. E 9 P02 263 125 Vac PCB 32,8 mm [1.29 in] mtg. holes 85 °C 3 A @ SPNO on Tall sim. roller I __ F 3,1 mm [0.12 in] 25 g max. F 0 P07 266 4 125 Vac edge PCB 34,0 mm [1.34 in] mtg. holes 177 °C with No Formed quick-connect __ E Straight J 15 g max. 2,9 mm [0.11 in] 5 H A 048 rating terminals available 59,4 mm [2.34 in] mtg. holes 6 oz to 14 oz 22 A @ Paddle 20 A 6 K 636 max. 125 Vac 139,5 mm [5.5 in] O Formed levers available 0.1 A @ L NOTES: N 8 oz max. 1 A 7 S 125 Vac A Not all possible combinations are available, these are only guidelines L B Lever length measured from center of back mounting hole to end of straight lever or center of roller Y 21 A @ C 16 A 300 g max. All ratings are UL/CSA, and where noted are also European-rated ENEC 9 V 125 Vac D Consider the temperature required and the mounting hole size when making this selection E Electric ratings “W” and “X” only used with “A” Mounting Construction and vice versa 15.1 A @ E,M __ F W European ENEC rating requires Mounting Construction code “9” or “0”, and Electrical Ratings A,B,D,E,K,S,V,Z 125 Vac G Not applicable for Electrical Ratings C,K,V,W,X,Z H 6 A @ Not applicable for Electrical Ratings B,C,K,V,W,X,Z E,K __ X I 125 Vac Applies to Electrical Ratings A,D,F,S only J Applies to Electrical Ratings D,F,S only 25 A @ K 20 A Applies to 150 g Operate Force and higher Z 125 Vac L Applies to 15 g to 150 g Operate Force M Applies to only 300 g Operate Force N Applies to only Electrical Rating V P Applies to only Electrical Ratings K,Z sensing.honeywell.com 4 MICRO SWITCH™ Premium Miniature Basic Switches Table 1. Specifications Characteristic Parameter Circuitry SPDT, SPNC, SPNO Operating force 0,25 N to 3,9 N [15 g to 397 g] quick connect; 4,75 mm x 0,51 mm [0.187 in x 0.02 in] Termination quick connect: 6,35 mm x 0,81 mm [0.25 in x 0.032 in] PCB (printed circuit board) Actuators pin plunger, integral lever options, auxiliary lever options Agency certification CSA, ENEC, UL; RoHS compliant Operating temperature -40 °C to 85 °C [-40 °F to 185 °F], options for 175 °C [347 °F] Mechanical life up to 10 million cycles Contact material silver, gold plated, gold alloy Housing material high strength thermoplastic Table 2. Electrical Ratings 3 Rating code UL, CSA ENEC 5 A 125 Vac, 250 Vac, 277 Vac 2 A 3 (1) A, 250 Vac 1/10 HP 250 Vac 11 A 1/3 HP 125 Vac, 250 Vac or 277 Vac 2 B 1/2 A 125 Vdc; 1/4 A 250 Vdc 10 (3) A, 250 Vac 1 4 A 125 Vac “L” 15.1 A 1/2 HP 125 Vac, 250 Vac or 277 Vac C 1 /2A 125 Vdc – 1 1/4 A 250 Vdc; 5 A 125 Vac “L” 10 A 1/3 HP 125 Vac, 250 Vac or 277 Vac 2 E 1/2 A 125 Vdc 5 (2) A, 250 Vac 1 1/4 A 250 Vdc, 4 A 125 Vac “L” 3 A 125 Vac, 250 Vac, 277 Vac F – 1/10 HP 250 Vac 2 S 0.1 A, 125 Vac 1 (0.05) A, 250 Vac 21 A 1 HP 125 Vac, 250 Vac, 277 Vac 2 V 16 (4) A, 250 Vac 2 HP 250 Vac, 277 Vac W 15.1 A 125 Vac, 250 Vac, 277 Vac – 25 A, 277 Vac 2 Z 20 (5) A, 250 Vac 1 HP, 125 Vac; 2 HP, 250 Vac 1 Incandescent lamp rating 2 XX(Y) - XX = max. rated resistive value in amps, and (Y) = max. rated inductive value in amps 3 European ENEC rating requires Mounting Construction code “9” or “0”. See page four, Mounting Construction column sensing.honeywell.com 5 O.F. • Operating force V7 Series R.F. • Release force P.T. • Pretravel PRODUCT SPECIFICATIONS AND LISTINGS O.T. • Overtravel D.T. • Differential travel Contact your Honeywell rep or distributor for additional listings O.P. • Operating position Elect. Elect. O.F. max. P.T. max. O.T. min. Rating O.P. nominal D.T. Rating Catalog Listing Contacts newtons mm mm Spec. UL/CSA mm [inches] mm [inches] [grams] [inches] [inches] (page 4) (CE) 0,05 - 0,25 V7-2S17DB 0.1 A (---) S SPDT 0,79 [75] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-1S17D8 0.1 A (---) S SPDT 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-5F17D8 3 A (---) F SPDT 0,15 [15] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-4A17D8 5 A (---) A SPDT 0,25 [25] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-3E17D8 10 A (---) E SPDT 0,49 [50] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-1B37D8 11 A (---) B SPNC 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-2B17D8 11 A (---) B SPDT 0,74 [75] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-2B17E9 11 A (---) B SPDT 0,74 [75] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 Pin plunger V7-7B17D8 11 A (---) B SPDT 2,22 [227] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-1C17D8 15 A (---) C SPDT 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] BZ/BA Type 0,05 - 0,25 V7-1C17E9 15 A (---) C SPDT 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-1C37B8 15 A (---) C SPNC 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-1V19E9 21 A (16 A) V SPDT 1,72 [175] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-1V29E9 21 A (16 A) V SPNO 1,72 [175] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-1V39E9 21 A (16 A) V SPNC 1,72 [175] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-1Z19E9 25 A (20 A) Z SPDT 2,21 [225] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-1Z29E9 25 A (20 A) Z SPNO 2,21 [225] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] 0,05 - 0,25 V7-1Z20E9* 25 A (20 A) Z SPNO 2,21 [225] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] [0.002-0.010] Lever V7-1C17D8-002 15 A (---) C SPDT 1,57 [160] 15,2 [0.600] 1,52 [0.060] 0,89 [0.035] 0,36 [0.015] max. 22,1 mm [0.87 in] V7-1C17E9-002 15 A (---) C SPDT 1,57 [160] 15,2 [0.600] 1,52 [0.060] 0,89 [0.035] 0,36 [0.015] max. V7-6C18D8-002* 15 A (---) C SPDT 4,05 [413] 15,2 [0.600] 1,52 [0.060] 0,89 [0.035] 0,36 [0.015] max. *3,1 mm mtg holes sensing.honeywell.com 6 O.F. • Operating force MICRO SWITCH™ Premium Miniature Basic Switches R.F. • Release force P.T. • Pretravel O.T. • Overtravel PRODUCT SPECIFICATIONS AND LISTINGS D.T. • Differential travel Contact your Honeywell rep or distributor for additional listings O.P. • Operating position Elect. Elect. O.F. max. P.T. max. O.T. min. Rating O.P. nominal D.T. Rating Catalog Listing Contacts newtons mm mm Spec. UL/CSA mm [inches] mm [inches] [grams] [inches] [inches] (page 4) (CE) V7-1S17D8-022 0.1 A (---) S SPDT 0,83 [85] 15,2 [0.60] 3,04 [0.120] 2,16 [0.085] 0,76 [0.030] max. V7-3S17D8-022 0.1 A (---) S SPDT 0,29 [30] 15,2 [0.60] 3,04 [0.120] 2,16 [0.085] 0,76 [0.030] max. Lever V7-3S17E9-022 0.1 A (---) S SPDT 0,29 [30] 15,2 [0.60] 3,04 [0.120] 2,16 [0.085] 0,76 [0.030] max. 35,6 mm [1.40 in] V7-1B17D8-022 11 A (---) B SPDT 0,80 [82] 15,3 [0.603] 3,04 [0.120] 1,70 [0.067] 0,69 [0.027] max. V7-1B19D8-022 11 A (10 A) B SPDT 0,80 [82] 15,3 [0.603] 3,25 [0.128] 1,78 [0.070] 0,71 [0.028] max. V7-2B17D8-022 11 A (---) B SPDT 0,40 [41] 15,3 [0.603] 3,04 [0.120] 1,70 [0.067] 0,71 [0.027] max. V7-6B19E9-022 11 A (10 A) B SPDT 2,11 [215] 15,2 [0.60] 3,25 [0.128] 1,35 [0.053] 0,76 [0.030] max. V7-3S17D8-048 0.1 A (---) S SPDT 0,16 [16] 15,3 [0.603] 5,97 [0.235] 3,00 [0.118] 1,27 [0.050] max. V7-2B17D8-048 11 A (---) B SPDT 0,20 [20] 15,3 [0.603] 5,97 [0.235] 2,92 [0.115] 1,27 [0.050] max. Lever 59,4 mm [2.34 in] V7-1C17D8-048 15 A (---) C SPDT 0,44 [45] 15,2 [0.603] 5,94 [0.234] 4,19 [0.165] 1,52 [0.060] max. V7-1V19E9-048 21 A (16 A) V SPDT 0,54 [55] 15,4 [0.605] 6,35 [0.250] 3,05 [0.120] 1,40 [0.055] max. V7-9W1AE9-048** 15 A (---) W SPDT 0,88 [90] 15,2 [0.603] 6,35 [0.250] 3,15 [0.124] 1,37 [0.054] max. V7-1S17D8-263 0.1 A (---) S SPDT 0,88 [90] 18,54 [0.730] 2,79 [0.110] 1,90 [0.075] 0,76 [0.030] max. V7-3E19E9-263 10 A (5 A) E SPDT 0,32 [33] 18,54 [0.730] 2,54 [0.100] 1,90 [0.075] 0,76 [0.030] max. Lever Sim. Roll 32,8 mm [1.29 in] V7-1B17D8-263 11 A (---) B SPDT 0,88 [90] 18,54 [0.730] 2,79 [0.110] 1,52 [0.060] 0,76 [0.030] max. V7-1C17D8-263 15 A (---) C SPDT 0,89 [91] 18,54 [0.730] 2,79 [0.110] 1,55 [0.061] 0,61 [0.024] max. V7-1V29E9-263 21 A (16 A) V SPNO 1,08 [110] 18,49 [0.728] 2,90 [0.114] 1,62 [0.064] 0,64 [0.025] max. V7-1Z10E9-263* 25 A (20 A) Z SPDT 1,33 [136] 18,49 [0.728] 2,90 [0.114] 1,62 [0.064] 0,64 [0.025] max. V7-2S17D8-201 0.1 A (---) S SPDT 0,88 [90] 20,57 [0.810] 1,19 [0.047] 1,02 [0.040] 0,38 [0.015] max. Lever, Roller 20,57 mm [0.81 in] V7-6B19E9-201 11 A (10 A) B SPDT 4,50 [459] 20,52 [0.808] 1,42 [0.056] 0,86 [0.034] 0,33 [0.013] max. V7-7B17D8-201 11 A (---) B SPDT 2,78 [283] 20,52 [0.808] 1,42 [0.056] 0,86 [0.034] 0,33 [0.013] max. V7-1C17D8-201 15 A (---) C SPDT 1,72 [175] 20,57 [0.810] 1,19 [0.047] 0,81 [0.032] 0.30 [0.012] max. V7-1S17D8-207 0.1 A (---) S SPDT 0,83 [85] 20,57 [0.810] 2,84 [0.112] 2,03 [0.080] 0,76 [0.030] max. Lever, Roller 34,04 mm V7-2A17D8-207 5 A (---) A SPDT 0,42 [43] 20,57 [0.810] 2,92 [0.115] 1,52 [0.060] 0,64[0.025] max. [1.34 in] V7-1B17D8-207 11 A (---) B SPDT 0,83 [85] 20,57 [0.810] 2,92 [0.115] 1,52 [0.060] 0,76 [0.030] max. V7-1C17D8-207 15 A (---) C SPDT 0,88 [90] 20,57 [0.810] 2,92 [0.115] 1,52 [0.060] 0,64[0.025] max. V7-1V19E9-207 21 A (16 A) V SPDT 0,98 [100] 20,52 [0.808] 3,07 [0.121] 1,65 [0.065] 0,76 [0.030] max. *3,1 mm mtg holes ** 177 °C [350 °F] sensing.honeywell.com 7 V7 Series AVAILABLE TERMINALS Quick Connect (QC) Printed Circuit Board (PO2) D8 Terminals: 0.187 in wide x 0.020 in thick. E8 Terminals: 0.187 in wide x 0.020 in thick. These terminals interface with snap-on receptacles and other components from AMPMODU interconnection system. E9 Terminals: 0.250 in wide x 0.032 in thick. STANDARD ACTUATOR OPTIONS Straight Lever (-002) Roller Lever (-201) 10,2 6,4 0.40 0.25 20,2 2,8 0.80 00.11 2,8 1,0 Straight Lever (-022) Roller Lever (-207) 0.11 .04 2,90 Ø hole (3,10/.122 option) 0.114 10,3 0.41 2,8 1,5 8,9 0.11 0.06 0.35 NC 18,2 COM max. NO 0.72 3,20 0,8 2,4 (3) dia 2,90 Straight Lever (-048) Simulated Roller Lever (-263) 0.126 0.03 dia 0.10 0.114 3,46 14,4 22,2 3,10 0.134 0.57 0.88 0.122 opt 28,8 opt 1.14 Straight lever (-022) ACCESSORIES Part Number Description 15PA177-V7 Insulator packet: 500 pieces of 0,46 mm [0.018 in] thick varnished fiberglass Plunger boot seal: Elastomer, dust and splash resistant 15PA260 (Switch not included) sensing.honeywell.com 8 ADDITIONAL INFORMATION WARNING The following associated literature is available on the Honeywell web PERSONAL INJURY site at sensing.honeywell.com: DO NOT USE these products as safety or emergency stop • Product installation instructions devices or in any other application where failure of the • Product range guide product could result in personal injury. • Product nomenclature tree Failure to comply with these instructions could result in death or serious injury. • Product application-specific information – Application note: Electronic sensors and electromechanical switches in valves and flow meters WARNING – Application note: Electronic sensors and MICRO SWITCH ™ MISUSE OF DOCUMENTATION switches in industrial air compressors • The information presented in this product sheet is for – Application note: Sensors and switches for HVAC/R reference only. Do not use this document as a product applications installation guide. • Complete installation, operation, and maintenance – Application note: Sensors and switches in oil rig applications information is provided in the instructions supplied with – Application note: Sensors and switches in sanitary valves each product. – Application note: Sensors and switches for valve monitors and Failure to comply with these instructions could result in valve indicators death or serious injury. – Application note: Treadmill equipment WARRANTY/REMEDY – Application note: V7 available terminals – Technical bulletin: Applying precision switches Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard – Technical bulletin: Low energy switch guide product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particu- Find out more lar purpose. In no event shall Honeywell be liable for conse- Honeywell serves its customers quential, special, or indirect damages. through a worldwide network of sales offices, representatives While we provide application assistance personally, through our and distributors. For application literature and the Honeywell website, it is up to the customer to assistance, current specifications, determine the suitability of the product in the application. pricing or name of the nearest Authorized Distributor, contact Specifications may change without notice. The information we your local sales office. supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. To learn more about Honeywell’s sensing and switching products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Productivity Solutions Honeywell 1985 Douglas Drive North 004987-3-EN IL50 GLO Golden Valley, MN 55422 October 2015 honeywell.com Copyright © 2015 Honeywell International Inc. All rights reserved.