Basic Board Mount Pressure Sensors 32305128 ABP Series—High Accuracy, Compensated/Amplified Issue E 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi Digital or Analog Output, Liquid Media Capable Datasheet improving resolution and system accuracy. Optional internal diagnostics validate that the sensor readings are correct. • Flexible: Supply voltage range, variety of pressure units, types, and ranges, output options, and wide operating temperature range simplify use in the application. • Versatile: Wet-media compatibility, sleep mode, and temperature output options make the sensor a versatile choice for Internet of Things applications. • Honeywell Brand: Utilize proprietary Honeywell technology, and are protected by multiple global patents. DIFFERENTIATION • Enhanced accuracy helps the design engineer fully understand the error in measurement. • Wide supply voltage range offers design flexibility. • Power consumption when utilizing sleep mode option allows for use in battery-powered applications. DESCRIPTION FEATURES The ABP Series are piezoresistive silicon pressure sensors • Measure gage and differential pressures offering a ratiometric analog or digital output for reading • Total Error Band (see Figure 1): ±1.5 %FSS pressure over the specified full scale pressure span and • Liquid media option: Allows for wet/wet operation on dual temperature range. They are calibrated and temperature ported devices compensated for sensor offset, sensitivity, temperature • Industry-leading long-term stability: ±0.25 %FSS effects and accuracy errors (which include non-linearity, • Industry-leading accuracy: ±0.25 %FSS BFSL repeatability and hysteresis) using an on-board Application • Wide pressure range: 60 mbar to 10 bar | 6 kPa to 1 MPa | Specific Integrated Circuit (ASIC). Calibrated output 1 psi to 150 psi values for pressure are updated at approximately 1 kHz for • As small as 8 mm x 7 mm analog and 2 kHz for digital. All products are designed and • High burst pressures (see Table 7) manufactured according to ISO 9001 standards. • Calibrated over temperature range of 0°C to 50°C [32°F to 122°F] • Dry gases option: The input port is limited to non-corrosive, • Operates from a single power supply of either 3.3 Vdc or 5.0 Vdc non-ionic media (e.g., dry air, gases) and should not be 2 • Output: Ratiometric analog or I C- or SPI-compatible 12-bit exposed to condensation. The gases are limited to media digital compatible with high temperature polyamide, silicone, • Power consumption: 2 uA typical when utilizing sleep mode option alumina ceramic, silicon, gold, and glass. • Meet IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1 • Liquid media option: Includes an additional silicone-based requirements gel coating to protect the electronics under port P1, which • REACH and RoHS compliant enables use with non-corrosive liquids (e.g. water and • Options: Internal diagnostic function, liquid media, sleep saline) and in applications where condensation can occur. mode, temperature output Since port P2 is designed for use with non-corrosive liquids, this option is often suitable for wet-wet differential sensing. POTENTIAL APPLICATIONS VALUE TO CUSTOMERS • Medical: CPAP, blood analysis, blood pressure monitoring, • Simplifies design-in: Small size saves room on the PC board breast pumps, drug dosing, hospital beds, massage (PCB), or simplifies design in smaller and lower power machines, oxygen concentrators, patient monitoring, sleep devices. Meets Moisture Sensitivity Level 1 requirements, apnea equipment, urine analyzers, ventilators/portable which allows for unlimited shelf life when stored at ventilators, and wound therapy <30 ºC/85 %RH and, under most storage conditions, allows • Industrial: Air brakes, HVAC/transmitters, life sciences, for PCB soldering without any material concern about solder material handling, pneumatic control and regulation, joint quality due to aging of the sensor terminals, which process gas monitoring, and valve positioning/positioners minimizes the concern about aging of the terminals prior • Commercial: Air beds, coffee makers, and washing PCB assembly. Pressure choices allow engineers to select machines range required for their application. Leadless SMT, SMT, and DIP package options. PORTFOLIO • Cost-effective: Small size helps engineers reduce design The Basic ABP Series is an addition to the following portfolio and manufacturing costs while maintaining enhanced of board mount pressure sensors: Basic NBP Series, Basic performance and reliability of the systems they design. TBP Series, TruStability™ HSC Series, TruStability™ SSC • Accurate: Total Error Band (TEB) and wide pressure range Series, TruStability™ TSC Series, and TruStability™ NSC Series. enable engineers to optimize system performance by Sensing and Internet of Things Basic Board Mount Pressure Sensors, ABP Series Figure 1. Total Error Band Total Error Band (TEB) is a single specification that includes all possible sources of error. TEB should not be confused with accuracy, which is actually a component of TEB. TEB is the worst All Possible Errors error that the sensor could experience. The TEB specification Offset on a datasheet may be confusing. Honeywell uses the TEB Full Scale Span specification in its datasheet because it is the most comprehensive Pressure Non-Linearity Total Accuracy measurement of a sensor’s true accuracy. Honeywell also Pressure Hysteresis Error BFSL provides the accuracy specification in order to provide a common Pressure Non-Repeatibility Band comparison with competitors’ literature that does not use the Thermal Effect on Offset TEB specification. Many competitors do not use TEB—they simply Thermal Effect on Span specify the accuracy of their device. Their accuracy specification, Thermal Hysteresis however, may exclude certain parameters. On their datasheet, the errors are listed individually. When combined, the total error (or what would be TEB) can be significant. 1 Table 1. Absolute Maximum Ratings Characteristic Min. Max. Unit Supply voltage (V ) -0.3 6.0 Vdc supply Voltage on any pin -0.3 V + 0.3 V supply Digital interface clock frequency: 2 I C 100 400 kHz SPI 50 800 ESD susceptibility (human body model) 2 — kV Storage temperature -40 [-40] 85 [185] °C [°F] Soldering time and temperature: lead solder temperature (DIP) 4 s max. at 250°C [482°F] peak reflow temperature (Leadless SMT, SMT) 15 s max. at 250°C [482°F] 1 Absolute maximum ratings are the extreme limits the device will withstand without damage. Table 2. Environmental Specifications Parameter Characteristic Humidity: all external surfaces 0 %RH to 95 %RH, non-condensing internal surfaces of Liquid Media Option (T and V) 0 %RH to 100 %RH, condensing internal surfaces of Dry Gases Option (N and D) 0 %RH to 95 %RH, non-condensing 15 g, 10 Hz to 2 kHz Vibration 100 g, 6 ms duration Shock 1 1 million pressure cycles minimum Life J-STD-020-D.1 Moisture Sensitivity Level 1 Solder reflow (unlimited shelf life when stored at <30°C/85 %RH) 1 Life may vary depending on specific application in which the sensor is used. 1 Table 3. Wetted Materials Pressure Port 1 (P1) Component Pressure Port 2 (P2) Dry Gas Option Liquid Media Option Ports and covers high temperature polyamide Substrate alumina ceramic — alumina ceramic Adhesives epoxy, silicone epoxy, silicone gel epoxy, silicone silicon, glass, solder, gold, Electronic components 304 SST silicon aluminum 1 Contact Honeywell Customer Service for detailed material information. Table 4. Sensor Pressure Types Pressure Type Description Gage Output is proportional to the difference between applied pressure and atmospheric (ambient) pressure. Differential Output is proportional to the difference between the pressures applied to each port (Port 1 – Port 2). 2 Sensing and Internet of Things Basic Board Mount Pressure Sensors, ABP Series Table 5. Operating Specifications Analog Digital Characteristic Unit Min. Typ. Max. Min. Typ. Max. 1, 2, 3 Supply voltage (V ): supply 3.3 Vdc 3.0 3.3 3.6 3.0 3.3 3.6 Vdc 5.0 Vdc 4.75 5.0 5.25 4.75 5.0 5.25 Supply current: 3.3 Vdc — 2.1 2.8 — 3.1 3.9 mA 5.0 Vdc — 2.7 3.8 — 3.7 4.6 mA sleep mode option — — — — 1 10 uA 4 Operating temperature range -40 [-40] — 85 [185] -40 [-40] — 85 [185] °C [°F] 5 Compensated temperature range 0 [-32] — 50 [122] 0 [-32] — 50 [122] °C [°F] 6 Temperature output option — — — — 1.5 — °C Startup time (power up to data ready) — — 5 — — 3 ms Response time — 1 — — 0.46 — ms Clipping limit: upper — — 97.5 — — — %Vsupply lower 2.5 — — — — — 2 I C/SPI voltage level: low — — — — — 20 %Vsupply high — — — 80 — — Pull up on SDA/MISO, SCL/SCLK, SS — — — 1 — — kOhm 7 8 Total Error Band — — ±1.5 — — ±1.5 %FSS 9 Accuracy — — ±0.25 — — ±0.25 %FSS BFSL Long term stability (1000 hr, 25°C [77°F]) — — ±0.25 — — ±0.25 %FSS 0.03 — — — — — %FSS Output resolution — — — 12 — — bits 1 Sensors are either 3.3 Vdc or 5.0 Vdc based on the catalog listing selected. 2 Ratiometricity of the sensor (the ability of the device output to scale to the supply voltage) is achieved within the specified operating voltage. 3 The sensor is not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure. 4 Operating temperature range: The temperature range over which the sensor will produce an output proportional to pressure. 5 Compensated temperature range: The temperature range over which the sensor will produce an output proportional to pressure within the specified performance limits. 6 Temperature output option: Typical temperature output error over the compensated temperature range of 0°C to 50°C. Operation in Sleep Mode may affect temperature output error depending on duty cycle. Refer to Figure 2 for temperature output error over the operating temperature range. 7 Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range. Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal effect on span, and thermal hysteresis. 8 Full Scale Span (FSS): The algebraic difference between the output signal measured at the maximum (Pmax.) and minimum (Pmin.) limits of the pressure range. (See Figure 3.) 9 Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at 25°C [77°F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and non-repeatability. Table 6. Sensor Output at Significant Percentages (Digital Versions Only) Digital Counts % Output decimal hex 0 0 0x0000 10 1638 0x0666 50 8192 0x2000 90 14746 0x399A 100 16383 0x3FFF Sensing and Internet of Things 3 Basic Board Mount Pressure Sensors, ABP Series Figure 2. Temperature Output Option Temperature Error (See Table 5.) 2.5 1.5 0 -1.5 -2.5 -40 0 25 50 85 Temperature (°C) 1 Figure 3. Transfer Function Limits Analog Versions Compensated Pressure Range 100 90 80 70 60 Ideal 50 1.5% Total Error Band 40 30 20 10 0 0 1 2 345 6 7 8 9 10 P P min. max. Pressure (example unit) 0.8 x Vsupply x (Pressure – P ) + 0.10 x Vsupply Output (V) = applied min. P – P max. min. Digital Versions Compensated Pressure Range 100 90 80 70 60 Ideal 50 1.5% Total Error Band 40 30 20 10 0 0 1 23456 7 8 9 10 P P min. max. Pressure (example unit) 80% 14 Output (% of 2 counts) = x (Pressure – P ) + 10% applied min. P – P max. min. 1 Transfer Function “A” is shown. See Figure 4 for other available transfer functions. 4 Sensing and Internet of Things 14 Output (%Vsupply) Output (% of 2 counts) Error (°C) Basic Board Mount Pressure Sensors ABP Series—High Accuracy Basic Board Mount Pressure Sensors, ABP Series Digital or Analog Output, Compensated/Amplified Figure 4. Nomenclature and Order Guide For example, ABPDNNN150PGAA3 defines an ABP Series Amplified Basic Pressure Sensor, DIP package, NN pressure port, dry gases only, no diagnostics,150 psi gage pressure range, analog output type, 10% to 90% of Vsupply (analog), transfer function, no temperature output, no sleep mode, 3.3 Vdc supply voltage. ABP D NN N 150PG A A 3 Supply Voltage Product Series 3 3.3 Vdc ABP Amplified Basic 5.0 Vdc 5 3 Transfer Function Package 14 10% to 90% of Vsupply (analog), 2 counts (digital) D DIP (Dual Inline Pin) A no temperature output, no sleep mode M SMT (Surface Mount Technology) 14 10% to 90% of 2 counts (digital only) D Leadless SMT temperature output enabled, sleep mode enabled L 14 10% to 90% of 2 counts (digital only) S Pressure Port no temperature output, sleep mode enabled DIP SMT Leadless SMT 14 10% to 90% of 2 counts (digital only) T No port No port NN No port NN NN temperature output enabled, no sleep mode Output Type 2 Analog I C, Address 0x38 A 3 2 SPI I C, Address 0x48 S 4 2 2 Single axial Single axial Single axial 0 I C, Address 0x08 5 I C, Address 0x58 AN AN AN barbed port barbed port barbed port 2 2 I C, Address 0x18 I C, Address 0x68 1 6 2 2 I C, Address 0x78 2 I C, Address 0x28 7 1, 2 Pressure Range 60 mbar to 10 bar 6 kPa to 1 MPa 1 psi to 150 psi Differential Differential Differential Single axial Single axial Single axial LN LN LN barbless port barbless port barbless port ±60 mbar 060MD 006KD ±6 kPa 001PD ±1 psi ±100 mbar 100MD ±10 kPa 005PD ±5 psi 010KD ±160 mbar ±16 kPa ±15 psi 160MD 016KD 015PD ±250 mbar 250MD 025KD ±25 kPa 030PD ±30 psi ±400 mbar ±40 kPa ±60 psi 400MD 040KD 060PD ±600 mbar 600MD 060KD ±60 kPa ±1 bar 001BD ±100 kPa 100KD Single radial Single radial JN JN ±1.6 bar barbless port barbless port ±160 kPa 1.6BD 160KD ±2.5 bar 2.5BD 250KD ±250 kPa ±4 bar 004BD ±400 kPa 400KD Gage Gage Gage 0 mbar to 60 mbar 0 kPa to 6 kPa 0 psi to 1 psi 060MG 006KG 001PG Dual radial Dual radial 100MG 0 mbar to 100 mbar 010KG 0 kPa to 10 kPa 0 psi to 5 psi 005PG JJ JJ barbless ports, barbless ports, 0 mbar to 160 mbar 0 kPa to 16 kPa 0 psi to 15 psi 160MG 016KG 015PG same side same side 0 mbar to 250 mbar 0 kPa to 25 kPa 0 psi to 30 psi 250MG 025KG 030PG 0 bar to 400 mbar 0 kPa to 40 kPa 0 psi to 60 psi 400MG 040KG 060PG 0 bar to 600 mbar 0 kPa to 60 kPa 0 psi to 100 psi 600MG 060KG 100PG 001BG 0 bar to 1 bar 100KG 0 kPa to 100 kPa 0 psi to 150 psi 150PG 0 bar to 1.6 bar 0 kPa to 160 kPa 1.6BG 160KG Single radial Single radial 0 bar to 2.5 bar 0 kPa to 250 kPa 2.5BG 250KG RN RN barbed port barbed port 0 bar to 4 bar 0 kPa to 400 kPa 004BG 400KG 0 bar to 6 bar 0 kPa to 600 kPa 006BG 600KG 010BG 0 bar to 10 bar 001GG 0 kPa to 1 MPa Option Dry gases only, no diagnostics N Dual radial Dual radial Dry gases only, diagnostics on RR RR D barbed ports, barbed ports, same side same side Liquid media, no diagnostics T Liquid media, diagnostics on V 1 Custom pressure ranges are available. Contact Honeywell Customer Service for more information. 2 See the explanation of sensor pressure types in Table 4. 3 The transfer function limits define the output of the sensor at a given pressure input. By specifying Pmin. and Pmax., the output at Pmin. and Pmax., the complete transfer function of the sensor is defined. See the graphical representations of the transfer function in Figure 3. Sensing and Internet of Things 5 Basic Board Mount Pressure Sensors, ABP Series Table 7. Pressure Range Specifications 1 2 Common Pressure Range Overpressure Burst Pressure Pressure Range Unit Mode (See Figure 4.) 3 Pmin. Pmax. Port 1 (P1) Port 2 (P2) Port 1 (P1) Port 2 (P2) Pressure 1 psi to 150 psi Differential 060MD -60 60 mbar 2000 850 3500 1000 10000 100MD -100 100 mbar 4000 1400 7000 2500 10000 160MD -160 160 mbar 4000 1400 7000 2500 10000 250MD -250 250 mbar 10000 2000 19000 4000 10000 400MD -400 400 mbar 10000 2000 19000 4000 10000 600MD -600 600 mbar 17000 2000 19000 4000 10000 001BD -1 1 bar 17 4 19 8 17 1.6BD -1.6 1.6 bar 17 8 19 16 17 2.5BD -2.5 2.5 bar 17 8 19 16 17 004BD -4.0 4.0 bar 17 16 19 19 17 Gage 060MG 0 60 mbar 2000 3500 5500 — — 100MG 0 100 mbar 2000 — 3500 — 10000 160MG 0 160 mbar 2000 — 3500 — 10000 250MG 0 250 mbar 4000 7000 10000 — — 400MG 0 400 mbar 10000 — 19000 — 10000 600MG 0 600 mbar 10000 — 19000 — 10000 001BG 0 1 bar 17 19 17 — — 1.6BG 0 1.6 bar 17 — 19 — 17 2.5BG 0 2.5 bar 17 — 19 — 17 004BG 0 4 bar 17 19 17 — — 006BG 0 6 bar 17 — 19 — 17 010BG 0 10 bar 17 — 19 — 17 6 kPa to 1 MPa Differential 006KD -6 6 kPa 200 85 350 100 1000 010KD -10 10 kPa 400 140 700 250 1000 016KD -16 16 kPa 400 140 700 250 1000 025KD -25 25 kPa 1000 200 1900 400 1000 040KD -40 40 kPa 1000 200 1900 400 1000 060KD -60 60 kPa 1700 200 1900 400 1000 100KD -100 100 kPa 1700 400 1900 800 1700 160KD -160 160 kPa 1700 800 1900 1600 1700 250KD -250 250 kPa 1700 800 1900 1600 1700 400KD -400 400 kPa 1700 1600 1900 1900 1700 Gage 006KG 0 6 kPa 200 — 350 — 550 010KG 0 10 kPa 200 350 1000 — — 016KG 0 16 kPa 200 350 1000 — — 025KG 0 25 kPa 400 — 700 — 1000 040KG 0 40 kPa 1000 1900 1000 — — 060KG 0 60 kPa 1000 1900 1000 — — 100KG 0 100 kPa 1700 — 1900 — 1700 160KG 0 160 kPa 1700 1900 1700 — — 250KG 0 250 kPa 1700 — 1900 — 1700 400KG 0 400 kPa 1700 — 1900 — 1700 600KG 0 600 kPa 1700 1900 1700 — — 001GG 0 1 MPa 1.7 — 1.9 — 1.7 6 Sensing and Internet of Things Basic Board Mount Pressure Sensors, ABP Series Table 7. Pressure Range Specifications (continued) 1 2 Common Pressure Range Overpressure Burst Pressure Pressure Range Unit Mode (See Figure 4.) 3 Pmin. Pmax. Port 1 (P1) Port 2 (P2) Port 1 (P1) Port 2 (P2) Pressure 1 psi to 150 psi Differential 001PD -1 1 psi 30 10 50 15 150 005PD -5 5 psi 150 30 275 40 150 015PD -15 15 psi 250 60 275 120 250 030PD -30 30 psi 250 120 275 240 250 060PD -60 60 psi 250 250 275 275 250 Gage 001PG 0 1 psi 30 — 50 — 150 005PG 0 5 psi 150 — 275 — 150 015PG 0 15 psi 250 — 275 — 250 030PG 0 30 psi 250 — 275 — 250 060PG 0 60 psi 250 — 275 — 250 100PG 0 100 psi 250 — 275 — 250 150PG 0 150 psi 250 — 275 — 250 1 Overpressure: The maximum pressure which may safely be applied to the product for it to remain in specification once pressure is returned to the operating pressure range. Exposure to higher pressures may cause permanent damage to the product. Unless otherwise specified this applies to all available pressure ports at any temperature with the operating temperature range. 2 Burst pressure: The maximum pressure that may be applied to the specified port (P1 or P2) of the product without causing escape of pressure media. Product should not be expected to function after exposure to any pressure beyond the burst pressure. 3 Common mode pressure: The maximum pressure that can be applied simultaneously to both ports of a differential pressure sensor without causing changes in specified performance. Figure 5. Recommended Filter Cap V SUPPLY V SUPPLY 0.1 uF V * OUT 0.001 uF* Ground *Analog output version only. Sensing and Internet of Things 7 6,3 [0.25] Basic Board Mount Pressure Sensors, ABP Series Figure 6. DIP Package Dimensional Drawings (For reference only: mm [in].) DIP NN: No port 8,0 [0.32] 7,3 [0.29] 2,54 Typ. 4,0 [0.100] [0.16] 2X 1,45 3,23 Wet media [0.057] 6 5 4 [0.127] 4 5 6 2,95 Dry media [0.116] 5,5 [0.22] 6,3 11,0 11,5 [0.25] [0.43] [0.45] 1,0 3 2 1 1 2 3 [0.04] 0,25 Typ. 8,6 [0.010] [0.34] 3,81 [0.150] 6X 0,46 [0.018] DIP AN: Single axial barbed port 8,0 [0.32] 7,3 [0.29] 7,00 2,54 Typ. 2X 1,45 3,63 Wet media [0.100] 4,0 [0.276] [0.057] [0.143] [0.16] 3,35 Dry media 6 5 4 4 5 6 [0.131] 3,56 [0.140] ø1,91 [0.075] 5,5 [0.22] 11,5 ø2,74 11,0 [0.45] [0.108] [0.43] ø2,32 [0.091] 1,0 3 2 1 1 2 3 [0.04] 0,25 Typ. 8,6 [0.010] [0.34] 3,81 [0.150] 6X 0,46 [0.018] 8 Sensing and Internet of Things 6,3 [0.25] Basic Board Mount Pressure Sensors, ABP Series Figure 6. DIP Package Dimensional Drawings (continued) DIP LN: Single axial barbless port 8,0 7,3 [0.32] [0.29] 2,54 Typ. 4,0 3,23 Wet media 4,80 [0.100] [0.16] [0.127] 2X 1,45 [0.189] [0.057] 2,95 Dry media 6 5 4 4 5 6 [0.116] 5,5 [0.22] 2,68 ø5,00 11,5 11,0 [0.106] [0.197] [0.45] [0.43] 1,0 3 2 1 1 2 3 [0.04] 0,25 Typ. 8,6 [0.010] [0.34] 6X 0,46 [0.018] 3,81 [0.150] 6X 0,46 [0.018] DIP JN: Single radial barbless port 0,7 3,38 Wet media [0.03 [0.133] 4,65 8,0 2.16 3,10 Dry media [0.32] [0.183] [0.085] 4 5 6 6 5 4 [0.122] 4,45 [0.175] 11,5 6,3 11,0 [0.45] [0.25] [0.43] ø1,88 [0.074] 0,25 Typ. [0.010] 1,0 [0.04] 3 2 1 1 2 3 8,6 7,3 [0.34] 2,54 Typ. 2X 1,45 [0.29] [0.100] [0.057] 3,81 [0.150] 6X 0,46 [0.018] Sensing and Internet of Things 9 Basic Board Mount Pressure Sensors, ABP Series Figure 6. DIP Package Dimensional Drawings (continued) 0,7 8,0 3,38 Wet media DIP JJ: Dual radial [0.03 [0.32] [0.133] 2,54 Typ. barbless ports, same 3,10 Dry media 2X 4,0 2X 1,47 [0.100] [0.122] [0.16] [0.058] side 2,82 4 5 6 6 5 4 [0.111] 2X 4,65 [0.183] Port 1 4,45 2X ø1,88 [0.175] [0.074] 6,3 2,10 11,5 11,0 [0.25] [0.083] Port 1 [0.43] [0.45] Port 2 4,45 Port 2 [0.175] 1,0 5,06 Wet media 3 2 1 0,25 Typ. 1 2 3 [0.04] [0.199] 7,3 8,6 [0.010] [0.29] [0.34] 4,78 Dry media [0.188] 3,81 [0.150] 6X 0,46 [0.018] DIP RN: Single radial 8,0 barbed port 2,01 4,0 [0.32] 0,5 3,58 Wet media [0.079] [0.16] 2,54 Typ. [0.02] 2X 1,47 [0.141] [0.100] [0.058] 4 5 6 3,30 Dry media 6 5 4 [0.129] ø1,60 [0.063] 3,10 4,55 [0.122] [0.179] 11,0 6,3 11,5 [0.43] [0.25] [0.45] ø1,75 [0.069] ø2,10 [0.083] 0,25 Typ. [0.010] 1,65 1 2 3 [0.065] 3 2 1 8,6 7,3 4,75 [0.34] [0.29] [0.187] 3,81 [0.150] 6X 0,46 [0.018] DIP RR: Dual radial 8,0 [0.32] barbed ports, same side 2,54 Typ. [0.100] 3,58 Wet media 2,78 2X 4,0 [0.141] [0.109] 2X 1.45 [0.16] [0.057] 3,30 Dry media 6 5 4 2X 4,75 4 5 6 [0.129] [0.187] 0,5 2X ø1,75 4,55 [0.02] [0.069] Port 1 2X ø1,60 [0.179] [0.063] 6,3 1,90 11,5 11,0 [0.25] [0.075] Port 1 Port 2 [0.45] [0.43] 2X ø2,10 4,55 [0.083] Port 2 [0.179] 1.0 4,76 [0.04] 3 2 1 8,6 1 2 3 [0.187] 0,25 Typ. 7,3 [0.34] [0.010] [0.29] 3,81 [0.150] 6X 0,46 [0.018] 10 Sensing and Internet of Things Basic Board Mount Pressure Sensors, ABP Series Figure 7. SMT Package Dimensional Drawings (For reference only: mm [in].) 7,3 SMT NN: No port [0.29] 8.0 4,0 [0.32] [0.16] 0,25 Typ. 3,23 Wet media 4 5 6 6 5 4 [0.010] [0.127] 2,95 Dry media [0.116] 5,5 [0.22] 6,3 11,0 11,5 [0.25] [0.43] [0.45] 6X 1,28 [0.050] 1,0 3 2 1 1 2 3 [0.04] 6X 0,46 4,2 [0.018] [0.17] 2X 1,45 2,54 Typ. [0.057] [0.100] SMT AN: Single axial 7,3 7,00 3,63 Wet media [0.29] barbed port [0.276] [0.143] 4,0 8.0 [0.16] 3,35 Dry media [0.32] [0.131] 6 5 4 4 5 6 0,25 Typ. [0.010] 3,56 [0.140] 5,5 [0.22] 6,3 11,5 11,0 [0.25] [0.43] [0.45] ø2,74 6X 1,28 [0.108] ø2,32 [0.050] [0.091] ø1,91 [0.075] 1,0 3 2 1 [0.04] 4,2 1 2 3 6X 0,46 [0.17] [0.018] 2,54 Typ. 2X 1,45 [0.100] [0.057] SMT LN: Single axial 7,3 4,80 3,23 Wet media [0.29] barbless port [0.189] [0.127] 4,0 8,0 [0.16] 2,95 Dry media [0.32] [0.116] 0,25 Typ. 6 5 4 4 5 6 [0.010] 5,5 [0.22] 11,0 6,3 ø5,00 2,68 [0.43] 11,5 [0.25] [0.197] [0.106] [0.45] 6X 1,28 [0.050] 1,0 [0.04] 3 2 1 4,2 1 2 3 [0.17] 6X 0,46 [0.018] 2,54 Typ. 2X 1,45 [0.100] [0.057] SMT JN: Single radial 8,0 2.16 barbless port 4,65 4,0 [0.32] 3,38 Wet media [0.16] [0.085] [0.183] 1,47 2,54 Typ. [0.133] [0.100] [0.058] 3,10 Dry media 4 5 6 6 5 4 [0.122] 0,7 [0.03] 4,45 [0.175] 11,0 6,3 11,5 [0.43] [0.25] [0.45] 1,88 [0.074] 1,0 0,25 Typ. [0.04] 1 2 3 3 2 1 4,2 6X 1,28 [0.010] 7,3 [0.17] [0.050] 6X 0,46 [0.29] [0.018] Sensing and Internet of Things 11 8,0 [0.32] 2,01 [0.079] 2,54 Typ. 4,75 [0.100] [0.187] 2X 1,45 6 5 4 [0.057] 4,55 [0.179] 11,0 [0.43] 1.65 1 2 3 6X 1,28 [0.065] [0.050] 6X 0,46 [0.018] Basic Board Mount Pressure Sensors, ABP Series Figure 7. SMT Package Dimensional Drawings (continued) SMT JJ: Dual radial barbless ports, same side 8,0 [0.32] 3,38 Wet media 2,82 2X 4.0 [0.133] [0.111] 2,54 Typ. [0.16] [0.100] 3,10 Dry media 2X 4.65 2X 1,45 5,06 Wet media [0.122] [0.183] [0.057] 6 5 4 4 5 6 [0.199] 0,7 [0.03] 4,78 Dry media [0.188] 4.45 2X 1,88 Port 1 [0.175] [0.074] 2,10 6,3 Port 2 11,0 11,5 [0.083] [0.25] Port 1 [0.43] [0.45] 4,45 Port 2 [0.175] 1,0 [0.04] 1 2 3 3 2 1 4,2 0,25 Typ. 6X 1,28 7,3 [0.17] [0.010] [0.050] 6X 0,46 [0.29] [0.018] SMT RN: Single radial barbed port 3,58 Wet media 4,0 [0.141] [0.16] 3,30 Dry media 4 5 6 [0.129] 0,5 [0.02] ø1,60 ø1,75 [0.063] [0.069] 6,3 11,5 [0.25] [0.45] ø2,10 [0.083] 1,0 [0.04] 0,25 Typ. 3 2 1 4,2 [0.010] [0.17] 7,3 [0.29] SMT RR: Dual radial barbed ports, both sides 8,0 2,78 [0.32] 3,58 Wet media [0.109] [0.141] 2,54 Typ. 2X 4.0 [0.100] 2X 4.75 3,30 Dry media [0.16] [0.187] 2X 1,45 [0.129] 4,76 4 5 6 [0.057] 6 5 4 [0.187] 3,10 [0.122] 0,5 2X ø1,60 [0.02] 4,55 [0.063] 1,90 Port 1 [0.179] [0.075] 2X ø2,10 11,5 6,3 [0.083] 11,0 Port 1 [0.45] [0.25] [0.43] Port 2 4,55 Port 2 2X ø1,75 [0.179] [0.069] 1,0 3 2 1 [0.04] 0,25 Typ. 1 2 3 4,2 6X 1,28 [0.010] 7,3 [0.17] 6X 0,46 [0.050] [0.29] [0.018] 12 Sensing and Internet of Things 2 Basic Board Mount Pressure Sensors, ABP Series Figure 8. Leadless SMT Package Dimensional Drawings (For reference only: mm [in].) Leadless SMT NN: No port 4.0 3,23 Wet media [0.16] 3 2 1 [0.13] 1 2 3 2,95 Dry media 3.5 [0.12] [0.14] 6,3 [0.25] 6X 1,25 [0.049] 4 5 6 6 5 4 7,3 2,5 Typ. 1,5 [0.10] [0.06] [0.29] 8,0 [0.32] Leadless SMT AN: Single axial barbed port 4.0 3,63 Wet media [0.16] [0.14] 3 2 1 1 2 3 3,35 Dry media [0.13] 3.5 [0.14] ø2,74 6,3 [0.25] [0.108] 6X 1,25 [0.049] ø1,91 ø2,32 [0.075] [0.091] 4 5 6 6 5 4 7,3 2,5 Typ. 1,5 [0.29] [0.10] [0.06] 8,0 [0.32] Leadless SMT LN: Single axial barbless port 4.0 3,23 Wet media [0.16] [0.13] 1 2 3 3 2 1 2,95 Dry media [0.12] 3.5 [0.14] ø2,68 6,3 [0.106] [0.25] 6X 1,25 [0.049] ø5,0 [0.20] 4 5 6 6 5 4 0,7 7,3 2,5 Typ. 1,5 [0.03] [0.29] [0.10] [0.06] 8,0 [0.32] Table 8. Pinouts Output Type Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 2 I C GND V INT NC SDA SCL supply SPI GND V SS NC MISO SCLK supply analog GND NC V NC NC V out supply Figure 9. Recommended PCB Layouts DIP SMT Leadless SMT Gage reference hole: do not plug Gage reference hole: do not plug 0,65 Gage reference hole: do not plug 6X ø0.73 [0.026] 12 3 [0.029] 1,30 [0.051] 1 3 6,00 6,00 8,85 [0.236] 4,00 [0.236] 7,00 [0.348] [0.157] 12 3 [0.28] 3,25 11,00 11,25 11,0 0.128] 8,00 [0.433] [0.443] [0.433] 65 4 [0.315] 3,00 12,35 5,00 [0.118] 5,00 [0.315] [0.197] [0.197] 65 4 2,50 2,73 6 54 [0.098] [0.107] 8,00 2,54 2,73 2,54 2,73 [0.315] [0.1] [0.107] [0.1] [0.107] 8,00 8,00 [0.315] [0.315] Sensing and Internet of Things 13 1,0 [0.04] 3,00 7,0 [0.118] [0.28] 7,0 1,0 [0.28] [0.04] 3,56 [0.140] 3,00 7,0 [0.118] [0.28] 1,0 [0.04] 3,00 7,0 [0.118] Port 1 [0.28] 4,1 [0.16] ADDITIONAL INFORMATION WARNING The following associated literature is available on the PERSONAL INJURY Honeywell web site at sensing.honeywell.com: DO NOT USE these products as safety or emergency stop • Product Range Guide devices or in any other application where failure of the • Product Line Guide product could result in personal injury. • Product Installation Instructions Failure to comply with these instructions could result in • Product Application Notes death or serious injury. • Technical Information: - SPI Communication with Honeywell Digital Output WARNING Pressure Sensors MISUSE OF DOCUMENTATION 2 - I C Communications with Honeywell Digital Output • The information presented in this datasheet is for Pressure Sensors reference only. Do not use this document as a product - Sleep Mode for Use with Honeywell Digital Pressure installation guide. Sensors: ASDX Series, APB Series, and TruStability™ • Complete installation, operation, and maintenance HSC, SSC Series information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the applicable warranty period. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgment or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable Find out more for consequential, special, or indirect damages. Honeywell serves its customers through While Honeywell may provide application assistance a worldwide network of sales offices, personally, through our literature and the Honeywell web site, it representatives and distributors. is buyer’s sole responsibility to determine the suitability of the For application assistance, current product in the application. specifications, pricing or name of the nearest Authorized Distributor, contact Specifications may change without notice. The information we your local sales office. supply is believed to be accurate and reliable as of this writing. However, Honeywell assumes no responsibility for its use. To learn more about Honeywell Sensing and Productivity Solutions’ products, call +1-815-235-6847 or 1-800-537- 6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell. com Honeywell Sensing and Internet of Things 9680 Old Bailes Road Fort Mill, SC 29707 32305128-E-EN | E | 05/17 honeywell.com © 2017 Honeywell International Inc. All rights reserved.