HONEYWELL CSLA2CE
Specifications
Manufacturer
Honeywell
Manufacturers Part #
CSLA2CE
Industry Aliases
CSLA2CE
Sub-Category
Current Sensors
Brand
Micro Switch
Factory Pack Quantity
6
Datasheet
Extracted Text
Solid State Sensors CS Series Linear Current Sensors FEATURES LINEAR CURRENT SENSORS 1 Linear output MICRO SWITCH CS series linear current 1 AC or DC current sensing sensors incorporate our 91SS12-2 and 1 Through-hole design SS94A1linear output Hall effect transduc- TM 1 Fast response time er (LOHET ). The sensing element is as- 1 Output voltage isolation from input sembled in a printed circuit board mount- 1 Minimum energy dissipation able housing. This housing is available in 1 Maximum current limited only by four configuration as shown in mounting conductor size dimension figures 1, 1a, 2 and 2a. Normal 1 Adjustable performance and built-in mounting is with 0.375 inch long 4-40 temperature compensation assures screw and square nut (not provided) in- reliable operation serted in the housing or a 6-20 self-tap- 1 Accurate, low cost sensing ping screw. The combination of the sen- 1 Operating temperature range –25 to sor, flux collector, and housing compris- 85°C es the holder assembly. These sensors 1 Housing: PET polyester are ratiometric. ORDER GUIDE — BOTTOM MOUNT WITH 9SS SENSOR, SOURCE OUTPUT Sensitivity Sensed mV&N* Mtg. Supply Supply Current Offset Offset Response At 12 VDC Catalog Dim. Volt. Current (Amps Volt. Shift Time Listing Fig. (Volts DC) (mA Max.) Peak) (Volts±10%) Nominal ± TOL (%/°C) (μ Sec.) CSLA1CD 1 8 to 16 19 57 Vcc/2 49.6 5.8 ±.05 3 CSLA1CE 1 8 to 16 19 75 Vcc/2 39.4 4.4 ±.05 3 CSLA1DE 2 8 to 16 19 75 Vcc/2 39.1 4.8 ±.05 3 CSLA1CF 1 8 to 16 19 100 Vcc/2 29.7 2.7 ±.05 3 CSLA1DG 2 8 to 16 19 120 Vcc/2 24.6 2.1 ±.05 3 CSLA1CH 1 8 to 16 19 150 Vcc/2 19.6 1.8 ±.05 3 CSLA1DJ 2 8 to 16 19 225 Vcc/2 13.2 1.2 ±.05 3 CSLA1EJ 1a 8 to 16 19 225 Vcc/2 13.2 1.5 ±.05 3 CSLA1DK 2 8 to 16 19 325 Vcc/2 9.1 1.7 ±.05 3 CSLA1EK 1a 8 to 16 19 325 Vcc/2 9.4 1.3 ±.05 3 CSLA1EL 1a 8 to 16 19 625 Vcc/2 5.6 1.3 ±.05 3 BOTTOM MOUNT WITH SS9 SENSOR, SINK/SOURCE OUTPUT Sensitivity Sensed mV&N* Mtg. Supply Supply Current Offset Offset Response At 8 VDC Catalog Dim. Volt. Current (Amps Volt. Shift Time Listing Fig. (Volts DC) (mA Max.) Peak) (Volts±2%) Nominal ± TOL (%/°C) (μ Sec.) CSLA2CD 1 6 to 12 20 72 Vcc/2 32.7 3.0 ±.02 3 CSLA2CE 1 6 to 12 20 92 Vcc/2 26.1 2.1 ±.02 3 CSLA2DE 2 6 to 12 20 92 Vcc/2 25.6 2.2 ±.02 3 CSLA2CF 1 6 to 12 20 125 Vcc/2 19.6 1.3 ±.02 3 CSLA2DG 2 6 to 12 20 150 Vcc/2 16.2 1.1 ±.02 3 CSLA2DJ 2 6 to 12 20 225 Vcc/2 8.7 0.6 ±.020 3 CSLA2DH 2 6 to 12 20 235 Vcc/2 9.8 1.1 ±.0125 3 CSLA2EJ 1a 6 to 12 20 310 Vcc/2 7.6 0.7 ±.0125 3 CSLA2DK 2 6 to 12 20 400 Vcc/2 5.8 0.5 ±.0125 3 CSLA2EL 1a 6 to 12 20 550 Vcc/2 4.3 0.4 ±.0125 3 CSLA2EM 1a 6 to 12 20 765 Vcc/2 3.1 0.3 ±.007 3 CSLA2EN 1a 6 to 12 20 950 Vcc/2 2.3 0.2 ±.007 3 NOTE: When monitoring purely AC current with zero DC component, a capacitor can be inserted in series with the output of the current sensor. The capacitor will block out the effect of the temperature variation of the offset voltage which increases the accuracy of the device. *N = number of turns PDFINFO p a g e - 0 5 8 58 Honeywell Sensing and Control1 1-800-537-6945 USA1 F1-815-235-6847 International 1 1-800-737-3360 Canada Current Solid State Sensors CS Series Linear Current Sensors SIDE MOUNT WITH 9SS SENSOR, SOURCE OUTPUT Sensitivity Sensed mV&N* Mtg. Supply Supply Current Offset Offset Response At 12 VDC Catalog Dim. Volt. Current (Amps Volt. Shift Time Listing Fig. (Volts DC) (mA Max.) Peak) (Volts±10%) Nominal ± TOL (%/°C) (μ Sec.) CSLA1GD 2a 8 to 16 19 57 Vcc/2 49.6 5.8 ±.05 3 CSLA1GE 2a 8 to 16 19 75 Vcc/2 39.4 4.4 ±.05 3 CSLA1GF 2a 8 to 16 19 100 Vcc/2 29.7 2.7 ±.05 3 SIDE MOUNT WITH SS9 SENSOR, SINK/SOURCE OUTPUT Sensitivity Sensed mV&N* Mtg. Supply Supply Current Offset Offset Response At 8 VDC Catalog Dim. Volt. Current (Amps Volt. Shift Time Listing Fig. (Volts DC) (mA Max.) Peak) (Volts±2%) Nominal ± TOL (%/°C) (μ Sec.) CSLA2GD 2a 6 to 12 20 72 Vcc/2 32.7 3.0 ±.02 8 CSLA2GE 2a 6 to 12 20 92 Vcc/2 26.1 2.1 ±.02 8 CSLA2GF 2a 6 to 12 20 125 Vcc/2 19.6 1.3 ±.02 8 CSLA2GG 2a 6 to 12 20 150 Vcc/2 12.7 0.6 ±.02 8 NOTE: When monitoring purely AC current with zero DC component, a capacitor can be inserted in series with the output of the current sensor. The capacitor will block out the effect of the temperature variation of the offset voltage which increases the accuracy of the device. *N = number of turns. MOUNTING DIMENSIONS (for reference only) Figure 1 Figure 2 PDFINFO p a g e - 0 5 9 Figure 1a Figure 2a * Application consideration: The out- put is clamped at the high end. Clamp- ing voltage may be as low as 9VDC. The output will not exceed the clamp- ing voltage regardless of field strength or supply voltage. Honeywell Sensing and Control1 1-800-537-6945 USA1 F1-815-235-6847 International 1 1-800-737-3360 Canada 59
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the CSLA2CE?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods