Honeywell Pressure Switches 50094081 HP, HE, MH, ME, LP, LE, 5000, and 1000 Series Issue 5 Datasheet DESCRIPTION FEATURES The Honeywell Pressure Switch portfolio consists of: • Pressure switching set point range: 3.5 psi to 4500 psi • Proof pressure: from 500 psi up to 10,000 psi • High Pressure (HE/HP Series) • Burst pressure: from 1250 psi up to 20,000 psi • Medium Pressure (ME/MH Series) • Life cycle rating up to 2 million • Low Pressure (LE/LP Series) 4 • IP67 sealing rating • 5000 Series, 1000 Series • Operating temperature: -40 °C to 120 °C [-40 °F to 248 °F] These pressure switches are durable, reliable 5 • Hysteresis option electromechanical gauge pressure on/off switches that are • More than 15 pressure port options and over 30 electrical available with either single pole single throw (SPST) normally terminations open or normally closed circuitry, or single pole double throw 3 • Plated steel, brass or stainless steel options (SPDT) circuitry. Their high proof pressure and burst pressure • Switching point accuracy up to ±2 % ratings can allow for use in many rugged applications that require the making or breaking of an electrical connection in POTENTIAL APPLICATIONS response to a pressure change of the system media. DIFFERENTIATION • Through optional smart diagnostic technology, Honeywell pressure switches are able to detect failures • Agricultural machinery • CNC machines such as open circuits, cut wires, worn insulation, and 6 • Heavy duty construction • Compressors/boilers more machinery and trucks • Fracking equipment • Optional smart diagnostic technology allows up to four • Lawn & garden machinery • Food & beverage equipment segregated signal amplitudes to perform diagnostics and • Marine vessels • Generators 6 status • Material handling • HVAC/R equipment 2 • Pressure port snubber suppresses pressure spikes machinery • Mud pumps • IP67 sealing provides enhanced durability in harsh • Railway • Pneumatic equipment 1 environmental and washing applications • Presses/punches • Pressure washers VALUE TO CUSTOMERS • Trash compactors • Water pumps & jet cutting • Designed to provide resistance to corrosion and enhances machines equipment life with available two million life cycle rating and 1 PORTFOLIO IP67 rating Honeywell also offers the PBN1 Series and PBN3 Series • Can expedite design and product cycle due to ability to Pressure Sensor. receive samples in two weeks and production units in four 1 HP, HE, MH, ME, LP, LE Series weeks 2 HP, HE Series • Can reduce tooling, service, and manufacturing labor costs 3 ME, MH, LP, LE Series due to standard connections, extended product life, and 4 HP, HE, LP, LE, ME Series 5 HP, HE, LP Series expedited design and production cycle 6 HP, HE, ME, LP, LE Series Safety and Productivity Solutions Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series Table 1. Specifications Character- HP Series HE Series ME Series MH Series LP Series LE Series 5000 Series 1000 Series istic Product length (various see pages 5 and 6 see page 5 see page 8 see page 7 see page 9 see page 9 see page 10 – terminations) Product length 58,42 mm 65,6 mm see pages 5 and 6 see page 5 see page 8 see page 7 see page 9 see page 9 (blade) [2.3 in] [2.583 in] Product length 60,96 mm see pages 5 and 6 see page 5 see page 8 see page 7 see page 9 see page 9 – (#8-32 screws) [2.4 in] Product length 73,66 mm see pages 5 and 6 see page 5 see page 8 see page 7 see page 9 see page 9 – (Metripack) [2.9 in] 0.50 in (steel) M10 x 1.25 banjo Hex size 27 mm 27 mm 27 mm 27 mm 27 mm 27 mm 0.437 in (brass) fitting Ease of 18 mm open box spanner box spanner box spanner box spanner box spanner box spanner 1/2 in open spanner installation spanner Snap-action yes yes no no yes no no no switch 1 Set point 10 psi to 60 psi 100 psi to 4500 psi 150 psi to 4500 psi 25 psi to 350 psi 40 psi to 500 psi 3.5 psi to 150 psi 3.5 psi to 150 psi 75 psi to 150 psi range [0,69 bar to 2,7 bar] Set point 6 (Base Style A) 6 4 4 4 4 8 – ranges 7 (Base Style B) 0.5 psi to 1 psi (±0.3 psi); 40 psi to 70 psi 1.1 psi to 3 psi 25 psi to 50 psi (±7 psi); (±0.5 psi); 100 psi to 150 psi 150 psi to 1000 psi (±3 psi); >70 psi to 130 psi 3.1 psi to 7 psi (±10 %); (±14%); >50 psi to 100 psi (±10 psi); (±1 psi); 150 psi to 500 psi 1000 psi to Set point (±7 psi); >130 psi to 200 psi 3.5 psi to 10 psi (±1 psi); 8 psi to 13 psi (±6 %); 2000 psi 20 psi ±10 psi; accuracy >100 psi to 150 psi (±15 psi); >10 psi to 50 psi (±3 psi); (±2 psi); 501 psi to 4000 psi (±12 %); 58 psi ±20 psi @ 25 °C (±10 psi); >200 psi to 280 psi >50 psi to 100 psi (±7 psi); 14 psi to 24 psi (±3.5 %); 2000 psi to (before test) >150 psi to 250 psi (±20 psi); >100 psi to 150 psi (±10 psi) (±3 psi); 4000 psi to 4500 4000 psi (±13 psi); >280 psi to 350 psi 25 psi to 50 psi psi (±11 %); >250 psi to 350 psi (±30 psi); (±5 psi); (±2 %) >4000 psi (±10 %) (±16 psi) >350 psi to 500 psi 51 psi to 90 psi (±40 psi) (±7 psi); 91 psi to 150 psi (±10 psi) 0.5 psi to 3 psi 40 psi to 70 psi (±1.5 psi); 25 psi to 50 psi (±6 psi); 4 psi to 7 psi (20 psi); >70 psi to 130 psi 3.5 psi to 10 psi (±2.5 psi); >50 psi to 100 psi (±10 psi); (±2.8 psi); 8 psi to 13 psi (30 psi); >130 psi to 200 psi >10 psi to 50 psi (±3.5 psi); Average dead- >100 psi to 150 psi (±15 psi); (±14 psi); 14 psi to 24 psi n/a n/a n/a n/a band max. (40 psi); >200 psi to 280 psi >50 psi to 100 psi (±8 psi); >150 psi to 250 psi (±20 psi); (±38 psi); 25 psi to 50 psi (50 psi); >280 psi to 350 psi >100 psi to 150 psi (±15 psi); >250 psi to 350 psi (±30 psi); (±40 psi) 51 psi to 90 psi (60 psi) >350 psi to 500 psi (±23 psi); (±40 psi) 91 psi to 150 psi (±40 psi) Operating 1400 psi 5,000 psi max. 5,000 psi max. 500 psi max. 600 psi max. 250 psi max. 250 psi max. 150 psi, 250 psi 2 pressure [96,5 bar] max. 10,000 psi (Base Style A) 2973 psi 3 Proof pressure 10,000 psi 4,000 psi 6,000 psi 500 psi 500 psi 500 psi 6,500 psi (Base [205 bar] Style B) 5 % to 55 % 3 % to 65 % 5 % to 55 % Hysteresis (based on set point (based on set point n/a n/a (based on set point n/a n/a n/a range) range) range) 20,000 psi (Base 3500 psi 4 Burst pressure Style A); 9,000 psi 20,000 psi 8,000 psi 9,000 psi 1250 psi 1250 psi 4000 psi [241 bar] (Base Style B) 15 A, 6 Vdc; Current rating 5 A at 250 Vac 3 A at 250 Vac 7.5 mA to 3 A, 7.5 mA to 5 A, 7.5 mA to 3 A, 12 Vdc with two- 100 mA to 3 A max. 8 A, 12 Vdc; (resistive) 5 A at 24 Vdc 3 A at 24 Vdc 24 Vdc and 250 Vac 24 Vdc and 250 Vac 24 Vdc and 250 Vac 1157 bulbs (4.4 A) 4 A, 24 Vdc Current rating 5 A at 115 Vac (SX 1 A, 120 Vac n/a n/a n/a 1 A at 28 Vdc n/a n/a (inductive) rating); 3 A at 28 Vdc 0.5 A, 240 Vac 8 Port Style C: Switches less than 975 psi will use Base Style B; switches greater than 975 psi will use Base Style A. Port Styles F and G: Switches less than 350 psi will use Base Style B; switches greater than 350 psi will use Base Style A. Port Styles A, B, E, M, P, T, and Y will use Base Style B. Switches less than 150 psi will only use Base Style B. 2 sensing.honeywell.com Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series Character- HP Series HE Series ME Series MH Series LP Series LE Series 5000 Series 1000 Series istic Rated thermal 5 A 3 A 3 A n/a 5 A 3 A n/a n/a current Rated insula- 28 V 28 V 28 V n/a 28 V 28 V n/a n/a tion voltage Short-circuit protective Class J fuse (10 A, 600 V) n/a Class J fuse (10 A, 600 V) n/a n/a device c-type max. rating Conditional short circuit 1000 A n/a 1000 A 1000 A n/a n/a current Pollution 3 (macro environment) n/a 3 (macro environment) n/a n/a degree Temperature -40 °C to 120 °C -40 °C to 85 °C -40 °C to 121 °C -20 °C to 74 °C -40 °C to 120 °C [-40 °F to 248 °F] rating [-40 °F to 248 °F] [-40 °F to 185 °F] [-40 °F to 250 °F] [-4 °F to 165 °F] Media multiple ports multiple ports 1/8-27 NPT male multiple ports multiple ports available connection available available thread available A = 1/4-18 NPT A = 1/4-18 NPT B = 1/8-27 NPT A = 1/4-18 NPT A = 1/4-18 NPT B = 1/8-27 NPT C = 1/2-20 UNF B = 1/8-27 NPT B = 1/8-27 NPT C = 1/2-20 UNF D = 1/8-27 PTF C = 1/2-20 UNF C = 1/2-20 UNF D = 1/8-27 PTF E = M12 × 1.5 D = 1/8-27 PTF D = 1/8-27 PTF E = M12 × 1.5 F = M14 × 1.5 E = M12 × 1.5 E = M12 × 1.5 C = 1/2-20 UNF F = M14 × 1.5 G = 9/16-18 UNF F = M14 × 1.5 F = M14 × 1.5 M10 x 1.25 double F = M14 × 1.5 Refer to product G = 9/16-18 UNF H = 3/4-16 UNF G = 9/16-18 UNF G = 9/16-18 UNF banjo; G =9/16-18 UNF Pressure ports nomenclature for H = 3/4-16 UNF J = G1/8 BSPP H = 3/4-16 UNF H = 3/4-16 UNF 1/8-27 NPT M10 x 1; H = 3/4-16 UNF pressure port types. J = G1/8 BSPP L = 3/8-24 UNF J = G1/8 BSPP J = G1/8 BSPP 1/8-27 NPT K = M18 × 1.5 M = 7/16-20 UNF M = 7/16-20 UNF M = 7/16-20 UNF M = 7/16-20 UNF N = 7/8-14 UNF R = R1/8 BSPT P = 1/2-14 NPT R = R1/8 BSPT R = R1/8 BSPT T = M10 × 1.0 R = R1/8 BSPT T = M10 × 1.0 T = M10 × 1.0 V = R1/2 BSPT T = M10 × 1.0 V = R1/2 BSPT V = R1/2 BSPT Y = G1/4 BSPP V = R1/2 BSPT Y = G1/4 BSPP Y = G1/4 BSPP Z = R1/4 BSPT Y = G1/4 BSPP Z = R1/4 BSPT Z = R1/4 BSPT Z = R1/4 BSPT 5 Circuit forms SPDT, SPST - NO/NC SPDT, SPST - NO/NC SPST - NO/NC SPDT, SPST - NO/NC SPDT, SPST - NO/NC SPST-NO; SPST-NC SPNO Smart pressure single- or dual-resistor topology available – single- or dual-resistor topology available – – 2 million (Base A) Life 1 million 1 million 1 million 2 million 1 million 100,000 cycles 100,000 cycles 1 million (Base B) Agency approv- UL Custom als (special use – – – – – – – (select models) switches) Agency approv- CE CE CE CE CE CE – – als (other) Field no no yes yes yes yes yes no 6 adjustability Spike yes yes no no no no no no dampening IP67 (connecetors) IP67 (connectors) IP67 (connectors) IP67 (connectors) Ingress IP67 (wire/Base A) IP67 (connectors) IP67 (connectors) IP67 (wire out) IP67 (wire out) IP67 (wire out) IP00 IP65 7 protection IP69K (wire/Base B) IP00 (blade/screw) IP00 (blade/screw) IP00 (blade/screw) IP00 (blade/screw) IP00 (blade/screw) IP00 (blade/screw) Vibration swept sine: 10 Hz to 2000 Hz at 15 g, 20 min/sweep; 8 hours in each axis – – resistance random: 5 Hz to 2000 Hz, 8 hours/axis; 14,88 g-RMS, each axis Shock 2 2 500 m/sec , 11 mSEC, 100 shocks / axis 500 m/sec , 11 mSEC 15 G @ 5 mSEC resistance ® ® Wetted part Kapton Kapton ® n/a Nitrile/EPDM/LTNB Tefzel Polymide film EPDM ® ® (diaphragm) (Teflon coated) (Teflon coated) Wetted part nitrile or EPDM nitrile or EPDM nitrile or EPDM nitrile or EPDM nitrile or EPDM nitrile o-ring, steel piston EPDM (piston) o-ring o-ring o-ring o-ring o-ring 133 g [4.7 oz] (Base Style A) Weight 53 g [1.9 oz] 53 g [1.9 oz] 58 g [2.0 oz] 53 g [1.9 oz] 65 g [2.3 oz] 40 g [1.4 oz] 178 g [6.28 oz] (Base Style B) Contacts silver / gold inlay silver gold plated gold plated gold plated gold plated silver-plated copper silver-plated copper Rynite 545 glass glass reinforced filled (housing); Product finish zinc plating zinc plating zinc plating zinc plating zinc plating zinc plating polyester (housing); Travalent plated steel plated steel (base) (base) 1 Set point: Point at which switch actuates or de-actuates 2 Operating pressure: Maximum normal system operating pressure 3 Proof pressure: Maximum pressure that the switch can handle while it maintains set point accuracy. Intermittent spikes to this level are acceptable. 4 Burst pressure: Point of complete switch failure 5 SPST: Single pole, single throw. SPDT: Single pole, double throw. NO: Normally open. NC: Normally closed. 6 Field adjustability only available with AA, BA, CA, and DA (SPST only) terminations. 7 IP00 for AA and BA terminations. Safety and Productivity Solutions 3 Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series Table 2. Terminations Series Available Terminations AA = Spade Terminals BA = Screw Terminals CA = Deutsch DT04-3P-E005 (3-Pin Connector) DA = Amp Super Seal 1.5 - 282105-1 (3-Pin Connector) EA = 10-inch Cable, 18 AWG (Wire Out, No Connector) FA = 10-inch Cable w/Deutsch DT04-3P-E005 (3-Pin Connector) (16 AWG)* GA = 10-inch Cable w/Amp Super Seal 1.5 - 282105-1 (3-Pin Connector) (18 AWG)* HA = 10-inch Cable w/Metripack 280 Delphi 15300002 (2-Pin Connector) (18 AWG)* JA = 10-inch Cable w/Din43650-C (3-Pin Connector) (18 AWG)* KA = 10-inch Cable w/M12x1 (Brad Harrison Micro) - 21032121306 Harting P/N (3-Pin Connector) (18 AWG)* LA = 10-inch Cable w/Packard Weatherpack Male Terminal - 12020827 (3-Pin Connector) (18 AWG)* MA = 10-inch Cable w/Deutsch DT04-2P-E005 (2-Pin Connector) (18 AWG) NA = 3-inch Cable w/Packard 2P Tower Connector - 12015792 (2-Pin Connector) (18 AWG) PA = 2.75-inch Cable w/Packard 2P Shroud Connector - 12010973 (2-Pin Connector) (18 AWG) HP, HE, ME, RA = 4-inch Cable w/Packard 2P Shroud Connector - 12010973 (2-Pin Connector) (16 AWG) SA = 5.5-inch Cable w/ITT Cannon 2P Sure-Seal Circular Connector - SS2R-120-1804-000 (2-Pin Connector) (18 AWG) LP, LE TA = 8.5-inch Cable w/ITT Cannon 3P Sure-Seal Circular Connector - SS3R-120-8551-001 (3-Pin Connector) (16 AWG)* UA = 10-inch Cable - Vacuum Impregnated w/Deutsch DT06-3S-EP06 (3-Socket Connector) (16 AWG)* VA = 10-inch Cable - Vacuum Impregnated w/Deutsch DT04-3P-E005 (3-Pin Connector) (16 AWG)* WA = 4.5-inch Cable w/Blade Terminals 6,3 mm x 0,8 mm (16 AWG)* XA = 10-inch Cable w/ Metripack 2-Pin Shroud Connector 153000027 (18 AWG) YA = 6-inch Cable w/Amp Super Seal 1.5 - 282104-1 (2-Pin Connector) (18 AWG)* ZA = 10-inch Cable w/Deutsch DT06-2S-CE06 (2-Socket Connector) (18 AWG) AB = Deutsch DT04-2P-E005 (2-Pin Connector) BB = 10-inch Cable w/Metripack 150 Delphi 12129615 (3-Pin Connector) (18 AWG)* CB = 6-inch Cable w/ AMP Super Seal 1.5 - 282080-1 (2-Pin Connector) (18 AWG) DB = 10-inch Cable w/AMP 2,5 mm System Series Connector 1-967402-1 (18 AWG)* EB = 4.5-inch Cable w/Packard Shroud Connector 12015792 (2-Pin Connector) (18 AWG) FB = 10-inch Cable w/Metripack 150 Delphi 12052641 (2-Pin Connector) (18 AWG) GB = 8.5-inch Cable w/Deutsch Plug HD 16-3 96S (3-Pin Connector) (16 AWG) AA = Spade Terminals BA = Screw Terminals DA = Amp Super Seal 1.5 - 282105-1 (3-Pin Connector) EA = 10-inch Cable, 18 AWG (Wire Out, No Connector) HA = 10-inch Cable w/Metripack 280 Delphi 15300002 (2-Pin Connector) (18 AWG)* MA = 10-inch Cable w/Deutsch DT04-2P-E005 (2-Pin Connector) (18 AWG) NA = 3-inch Cable w/Packard 2P Tower Connector - 12015792 (2-Pin Connector) (18 AWG) PA = 2.75-inch Cable w/Packard 2P Shroud Connector - 12010973 (2-Pin Connector) (18 AWG) RA = 4-inch Cable w/Packard 2P Shroud Connector - 12010973 (2-Pin Connector) (16 AWG) SA = 5.5-inch Cable w/ITT Cannon 2P Sure-Seal Circular Connector - SS2R-120-1804-000 (2-Pin Connector) (18 AWG) MH WA = 4.5-inch Cable w/Blade Terminals 6,3 mm x 0,8 mm (16 AWG)* XA = 10-inch Cable w/ Metripack 2-Pin Shroud Connector 153000027 (18 AWG) YA = 6-inch Cable w/Amp Super Seal 1.5 - 282104-1 (2-Pin Connector) (18 AWG)* ZA = 10-inch Cable w/Deutsch DT06-2S-CE06 (2-Socket Connector) (18 AWG) AB = Deutsch DT04-2P-E005 (2-Pin Connector) CB = 6-inch Cable w/ AMP Super Seal 1.5 - 282080-1 (2-Pin Connector) (18 AWG) DB = 10-inch Cable w/AMP 2,5 mm System Series Connector 1-967402-1 (18 AWG)* EB = 4.5-inch Cable w/Packard Shroud Connector 12015792 (2-Pin Connector) (18 AWG) FB = 10-inch Cable w/Metripack 150 Delphi 12052641 (2-Pin Connector) (18 AWG) *These connectors are designed for dual circuit (SPDT) by default. They can be used for single-circuit applications (SPNC/SPNO) by making suit- able connections. Refer to wiring diagram. 4 sensing.honeywell.com Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series DIMENSIONS - HIGH PRESSURE: HP SERIES (BASE STYLE A), HE SERIES Base Style A key specifications • Life: 2 million (HP), 1 million (HE); Burst pressure: 20,000 psi Figure 1. AMP Superseal 1.5 20,02 mm 61,64 mm [0.788 in] [2.427 in] 27 mm [1.063] hex A/F (bottom view) (top view) Female Connector Part Number (included): C-282105 Male Mating Connector (customer provided): C-282087 IP Rating: IP67 Figure 2. Deutsch 61,64 mm 21,16 mm 27 mm [2.427 in] [0.833 in] [1.063] hex A/F (bottom view) (top view) Female Connector Part Number (included): DT04-3P Male Mating Connector (customer provided): DT06-3S IP Rating: IP67 Figure 3. Spade Terminal 27 mm 61,64 mm 14,43 mm [1.063] hex A/F [2.427 in] [0.568 in] (bottom view) (top view) Figure 4. Screw Terminal 61,64 mm 12,65 mm 27 mm [2.427 in] [0.498 in] [1.063] hex A/F (bottom view) (top view) Figure 5. Cable 61,64 mm 19,51 mm [2.427 in] [0.768 in] 27 mm [1.063] hex A/F (bottom view) (top view) IP Rating: IP67 Safety and Productivity Solutions 5 Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series DIMENSIONS - HIGH PRESSURE: HP SERIES (BASE STYLE B) Base Style B key specifications • Life: 1 million; Burst pressure: 9,000 psi Figure 6. HP Series Base Style B 71,47 mm [2.814 in] 14,43 mm [0.568 in] HP with smaller port: dimension 2.814 in remains same (bottom view) for all base ports. Figure 7. HP Series Pressure Port Dimensions “H” Thread “H” Thread “Ø D” “Ø D” “A” “H” Thread “Ø D” “Ø C” Table 3. HP/HE Series Pressure Port Diameters and Heights Nomenclature Code Thread Height “A” Diameter “ØD” Diameter “ØC” Height “H” M 7/16-20 UNF – 9,25 mm [0.364 in] – 11 mm [0.433 in] 1 C 1/2-20 UNF – 10,85 mm [0.427 in] – 11 mm [0.433 in] 2 G 9/16-18 UNF – 12,24 mm [0.482 in] – 12 mm [0.472 in] H 3/4-16 UNF – 16,74 mm [0.66 in] – 14 mm [0.551 in] N 7/8-14 UNF – 19,6 mm [0.773 in] – 16 mm [0.630 in] T M10 x 1.0 1,60 mm [0.063 in] 9,25 mm [0.364 in] 13,79 mm [0.543 in] 11 mm [0.433 in] E M12 x 1.5 2,48 mm [0.098 in] 10,85 mm [0.427 in] 16,79 mm [0.661 in] 11 mm [0.433 in] 2 F M14 x 1.5 2,48 mm [0.098 in] 12,24 mm [0.482 in] 18,8 mm [0.74 in] 12 mm [0.472 in] K M18 x 1.5 2,48 mm [0.098 in] 16,74 mm [0.66 in] 23,8 mm [0.937 in] 14 mm [0.551 in] B 1/8-27 NPT – 10,29 mm [0.405 in] – 12,497 mm [0.492 in] A 1/4-18 NPT – 13,72 mm [0.540 in] – 17,63 mm [0.694 in] 1 Port Style C: Switches less than 975 psi will use Base Style B; switches greater than 975 psi will use Base Style A. 2 Port Styles F and G: Switches less than 350 psi will use Base Style B; switches greater than 350 psi will use Base Style A. Switches less than 150 psi will use only Base Style B. 6 sensing.honeywell.com Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series DIMENSIONS - MEDIUM PRESSURE: MH SERIES Figure 8. AMP Superseal 1.5 Figure 13. MH Series Pressure Port Dimensions 67,06 mm max. (bottom view) [2.64 in] max. Figure 9. Deutsch 2-pin “A” 67,06 mm max. Table 4. MH Series Pressure Port Diameters and Heights [2.64 in] max. (bottom view) Port Diameter “ØD” Height “H” R 1/2 BSPT 21,34 mm [0.840 in] 17,09 mm [0.673 in] Figure 10. Wire out R 1/4 BSPT 13,46 mm [0.530 in] 13,74 mm [0.541 in] R 1/8 BSPT 9,96 mm [0.392 in] 10,24 mm [0.403 in] 1/8-27 PTF 10,34 mm [0.407 in] 9,24 mm [0.364 in] 1/4-18 NPT 13,72 mm [0.540 in] 17,63 mm [0.694 in] 1/8-27 NPT 10,29 mm [0.405 in] 12,497 mm [0.492 in] G 1/4 BSPP 11,1 mm [0.437 in] 11,20 mm [0.441 in] (bottom view) 50,29 mm max. G 1/8 BSPP 8,28 mm [0.326 in] 7,59 mm [0.299 in] [1.98 in] max. 3/4-16 UNF 16,74 mm [0.659 in] 11,1 mm [0.437 in] Figure 11. Blade terminal 7/16-20 UNF 9,25 mm [0.364 in] 9,09 mm [0.358 in] 9/16-18 UNF 12,24 mm [0.482 in] 10,00 mm[0.394 in] 1/2-20 UNF 10,85 mm [0.427 in] 9,09 mm [0.358 in] Height Diameter Diameter Port Height “H” “A” “ØC” “ØD” 38,35 mm max. 2,49 mm 18,8 mm 11,71 mm 10,998 mm (bottom view) [1.51 in] max. M14 × 1.5 [0.098 in] [0.74 in] [0.461 in] [0.433 in] Figure 12. Screw terminal 2,49 mm 16,79 mm 9,70 mm 10,998 mm M12 × 1.5 [0.098 in] [0.661 in] [0.382 in] [0.433 in] 1,6 mm 13,79 mm 8,41 mm 8,51 mm M10 × 1.0 [0.063 in] [0.543 in] [0.331 in] [0.335 in] 38,35 mm max. (bottom view) [1.51 in] max. Safety and Productivity Solutions 7 Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series DIMENSIONS - MEDIUM PRESSURE: ME SERIES Figure 20. ME Series Pressure Port Dimensions Figure 14. AMP Superseal 1.5 H H 65,3 mm max. ØD (bottom view) [2.57 in] max. ØD Female connector part number (included): C-282105 Male mating connector (customer provided): C-282087 IP rating: IP67 Figure 15. Deutsch 3-pin A H ØD 64 mm max. ØC [2.52 in] max. (bottom view) Female connector part number (included): DT04-3P Male mating connector (customer provided): DT06-3S Table 5. ME Series Pressure Port Diameters and Heights IP rating: IP67 Port Diameter “ØD” Height “H” Figure 16. Deutsch 2-pin R 1/2 BSPT 21,34 mm [0.840 in] 17,09 mm [0.673 in] R 1/4 BSPT 13,46 mm [0.530 in] 13,74 mm [0.541 in] R 1/8 BSPT 9,96 mm [0.392 in] 10,24 mm [0.403 in] 1/8-27 PTF 10,34 mm [0.407 in] 9,24 mm [0.364 in] 65,5 mm max. 1/4-18 NPT 13,72 mm [0.540 in] 17,63 mm [0.694 in] (bottom view) [2.58 in] max. Female connector part number (included): DT04-2P 1/8-27 NPT 10,29 mm [0.405 in] 12,497 mm [0.492 in] Male mating connector (customer provided): DT06-2S IP rating: IP67 G 1/4 BSPP 11,1 mm [0.437 in] 11,20 mm [0.441 in] Figure 17. Wire out G 1/8 BSPP 8,28 mm [0.326 in] 7,59 mm [0.299 in] 3/4-16 UNF 16,74 mm [0.659 in] 11,1 mm [0.437 in] 7/16-20 UNF 9,25 mm [0.364 in] 9,09 mm [0.358 in] 9/16-18 UNF 12,24 mm [0.482 in] 10,00 mm[0.394 in] 1/2-20 UNF 10,85 mm [0.427 in] 9,09 mm [0.358 in] 48,51 mm max. (bottom view) [1.91 in] max. Height Diameter Diameter IP rating: IP67 Port Height “H” “A” “ØC” “ØD” Figure 18. Blade terminal 2,49 mm 18,8 mm 11,71 mm 10,998 mm M14 × 1.5 [0.098 in] [0.74 in] [0.461 in] [0.433 in] 2,49 mm 16,79 mm 9,70 mm 10,998 mm M12 × 1.5 [0.098 in] [0.661 in] [0.382 in] [0.433 in] 1,6 mm 13,79 mm 8,41 mm 8,51 mm M10 × 1.0 [0.063 in] [0.543 in] [0.331 in] [0.335 in] 38,9 mm max. (bottom view) [1.57 in] max. Figure 19. Screw terminal 38,9 mm max. (bottom view) [1.57 in] max. 8 sensing.honeywell.com Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series DIMENSIONS - LOW PRESSURE: LP SERIES, LE SERIES Figure 21. AMP Superseal 1.5 Figure 27. LP/LE Series Pressure Port Dimensions H H 58,93 mm max. ØD (bottom view) [2.32 in] max. ØD Figure 22. Deutsch 3-pin A H ØD 57,66 mm max. (bottom view) ØC [2.27 in] max. Table 6. LP/LE Series Pressure Port Diameters and Heights Figure 23. Deutsch 2-pin Port Diameter “ØD” Height “H” R 1/2 BSPT 21,34 mm [0.840 in] 17,09 mm [0.673 in] R 1/4 BSPT 13,46 mm [0.530 in] 13,74 mm [0.541 in] R 1/8 BSPT 9,96 mm [0.392 in] 10,24 mm [0.403 in] 1/8-27 PTF 10,34 mm [0.407 in] 9,24 mm [0.364 in] 58,93 mm max. 1/4-18 NPT 13,72 mm [0.540 in] 17,63 mm [0.694 in] (bottom view) [2.32 in] max. 1/8-27 NPT 10,29 mm [0.405 in] 12,497 mm [0.492 in] G 1/4 BSPP 11,1 mm [0.437 in] 11,20 mm [0.441 in] Figure 24. Wire out G 1/8 BSPP 8,28 mm [0.326 in] 7,59 mm [0.299 in] 3/4-16 UNF 16,74 mm [0.659 in] 11,1 mm [0.437 in] 7/16-20 UNF 9,25 mm [0.364 in] 9,09 mm [0.358 in] 9/16-18 UNF 12,24 mm [0.482 in] 10,00 mm [0.394 in] 1/2-20 UNF 10,85 mm [0.427 in] 9,09 mm [0.358 in] 42,16 mm max. (bottom view) [1.66 in] max. IP rating: IP67 Height Diameter Diameter Port Height “H” Figure 25. Spade terminal “A” “ØC” “ØD” 2,49 mm 18,8 mm 11,71 mm 10,998 mm M14 × 1.5 [0.098 in] [0.74 in] [0.461 in] [0.433 in] 2,49 mm 16,79 mm 9,70 mm 10,998 mm M12 × 1.5 [0.098 in] [0.661 in] [0.382 in] [0.433 in] 1,6 mm 13,79 mm 8,41 mm 8,51 mm M10 × 1.0 [0.063 in] [0.543 in] [0.331 in] [0.335 in] 33,02 mm max. (bottom view) [1.30 in] max. Figure 26. Screw terminal (bottom view) 33,02 mm max. [1.30 in] max. Safety and Productivity Solutions 9 Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series DIMENSIONS - 1000 SERIES, 5000 SERIES Figure 28. 1000 Series Dimensions 11,18 mm [0.44 in] min. 12,4 mm last full thread ref. [0.488 in] 6,02 mm [0.237 in] 33,1 mm 31,5 mm [1.303 in] [1.24 in] 65,6 mm [2.583 in] 55,11 mm [2.17 in] 34,85 mm [1.37 in] 5,5 mm [0.22 in] M 10 x 1.25 6G 45° 45° 2X 9,91 mm 3,2 mm [0.39 in] [0.13 in] 8,99 mm [0.35 in] 1,5 x 45° Ø2,5 cross drill 2,1 mm 0.25 x 45° chamfer [0.08 in] Figure 29. 5000 Series Dimensions 832 x 1/4 screw (3) 1/827 NPT 0.500 hex ref. Ø 37,34 mm [Ø 1.47 in] ref. 58,42 mm [2.3 in] ref. 10 sensing.honeywell.com Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series NOMENCLATURE: HIGH PRESSURE For example, HPR05500PFNSPAAA01 defines a high pressure switch, rising factory set, non-adjustable set point, 550 psi set point, psig, sealed gage pressure unit, M14 x 1.5 port type, SPST-NO silver contacts output, cold-rolled steel base, glycol-based fluid (EPDM) actuation/application, spade terminal connectors, standard switch, individually boxed units. N P HP R 05500 P F S AA A 01 Pressure Actuation/ Connector Pressure Packaging Port Type Output Series Set Point Set Point Unit Base Application Type Options Options Petroleum-based HP Series Rising Cold-rolled Standard 6,89 bar to 310,26 bar psig, SPST-NO, 1/4 in Spade Individually factory set, 1/4-18 NPT hydraulic fluid R A N S N AA A 01 P steel Terminals* switch boxed units* HE Series [100 psi to 4500 psi] sealed gage silver contacts (Nitrile) non-adjustable (100 psi to Falling NOTE: bar, Screw With 3 shrink Individually SPST-NC, Glycol-based factory set, F 1/8-27 NPT Pressure set point B B C P BA B 02 sealed gage silver contacts fluid (EPDM) Terminals* sleeve boxed units** 4500 psi), non-adjustable is always five digits. With shrink NOTE: EDPM O-ring option only available 25 individual High SPDT-NO/NC, Deutsch DT04-3P-E005 sleeve 1/2-20 UNF boxes packed in Set point below 100 psi C from 100 psi to 250 psi. C 15 CA For bar, the set point D silver contacts (3-Pin Connector)* (plastic coating) Pressure bulk packaging* is available only with value will be multiplied HP Series (Body Style B). Amp Super Seal 1.5 - With shrink 25 individual Switch by 100 and entered NO, gold sleeve boxes packed in 282105-1 M12 x 1.5 H DA D 16 E in the listing. For example, inlay contacts bulk packaging** (3-Pin Connector)* (acrylic coating) 15,45 Bar is noted as 01545. 50 individual This allows for 2 decimal NC, gold 10-inch Cable, 18 AWG 304,8 mm [12 in] M14 x 1.5 boxes packed in EA F 20 F J places. inlay contacts (Wire Out, No Connector) total wire length bulk packaging* 50 individual SPDT(NO/NC), 10-inch Cable w/Deutsch For psi, the set point With conduit boxes packed in DT04-3P-E005 9/16-18 UNF gold inlay 21 G FA G K sleeve value will be multiplied bulk packaging** contacts (3-Pin Connector) (16 AWG)* by 10 and entered NO, with 510 Ω/ 10-inch Cable w/Amp With Vibra seal for 25 units in in the listing. For example, Super Seal 1.5 - 282105-1 H 3/4-16 UNF 0.5 W & 160 Ω/ 25 H E GA port threads bulk packaging* 245.5 psi is noted as 02455. 0.5 W resistors (3-Pin Connector) (18 AWG)* This allows for 1 decimal place. 10-inch Cable w/Metripack #8-32 screw with 25 units in NC, with 3000 Ω/ M18 x 1.5 external tooth K 280 Delphi 15300002 26 HA J bulk packaging** F 0.125 W resistor lockwasher*** (2-Pin Connector) (18 AWG) 50 individual 10-inch Cable w/ 914,4 mm [36 in] parts in 7/16-20 UNF Din43650-C M JA K 50 total wire length (3-Pin Connector) (18 AWG)* bulk packaging* 10-inch Cable w/M12x1 304,8 mm [12 in] * Not applicable for HP total wire length with 7/8-14 UNF (Brad Harrison Micro) - N L Series (Base Style B) KA 21032121306 Harting P/N acrylic sleeve ** Not applicable for (3-Pin Connector) (18 AWG)* HP (Base Style A) & HE Series 914,4 mm [36 in] total wire length with 10-inch Cable w/Packard M M10 x 1.0 T acrylic sleeve Weatherpack Male Terminal - LA 12020827 (3-Pin Connector) *** For screw terminal option (18 AWG)* only 10-inch Cable w/Deutsch HP Series Port Types DT04-2P-E005 MA (2-Pin Connector) (18 AWG) Thread Type Base Style A Base Style B 3-inch Cable w/Packard 2P Tower Connector - A = 1/4-18 NPT n/a 100 psi to 4500 psi NA 12015792 (2-Pin Connector) (18 AWG) B = 1/8-27 NPT n/a 100 psi to 4500 psi 2.75-inch Cable w/Packard 2P Shroud Connector - PA 12010973 (2-Pin Connector) C = 1/2-20 UNF >975 psi n/a (18 AWG) 4-inch Cable w/Packard E = M12 x 1.5 n/a 100 psi to 4500 psi 2P Shroud Connector - RA 12010973 (2-Pin Connector) F = M14 x 1.5 >350 psi n/a (16 AWG) 5.5-inch Cable w/ITT G = 9/16-18 UNF >350 psi <350 psi Cannon 2P Sure-Seal Circular Connector - SA SS2R-120-1804-000 (2-Pin H = 3/4-16 UNF >150 psi <150 psi Connector) (18 AWG) K = M18 x 1.5 150 psi to 4500 psi n/a 8.5-inch Cable w/ITT Cannon 3P Sure-Seal Circular Connector - TA M = 7/16-20 UNF n/a 100 psi to 4500 psi SS3R-120-8551-001 (3-Pin Connector) (16 AWG)* N = 7/8-14 UNF 150 psi to 4500 psi n/a 10-inch Cable - Vacuum Impregnated w/Deutsch T = M10 x 1.0 n/a 100 psi to 4500 psi UA DT06-3S-EP06 (3-Socket Connector) (16 AWG)* Port Type A, B, E, M, and T will be available only with HP Series. 10-inch Cable - Vacuum Impregnated w/Deutsch VA Base Style B will be available only with HP Series DT04-3P-E005 (3-Pin Connector) (16 AWG)* 4.5-inch Cable w/ 1/4 in Spade Terminals 6,3 mm x WA 0,8 mm (16 AWG) 10-inch Cable w/ Metripack 2-Pin Shroud Connector XA 153000027 (18 AWG) 6-inch Cable w/Amp Super Seal 1.5 - 282104-1 YA (2-Pin Connector) (18 AWG) 10-inch Cable w/Deutsch DT06-2S-CE06 (2-Socket ZA Connector) (18 AWG) 10-inch Cable w/Metripack 150 Delphi 12129615 BB (3-Pin Connector) (18 AWG) 6-inch Cable w/ AMP Super Seal 1.5 - 282080-1 CB (2-Pin Connector) (18 AWG) 10-inch Cable w/AMP 2,5 mm System Series Connector DB 1-967402-1 (18 AWG)* 4.5-inch Cable w/Packard Shroud Connector 12015792 EB (2-Pin Connector) (18 AWG) 10-inch Cable w/Metripack 150 Delphi 12052641 FB (2-Pin Connector) (18 AWG) 8.5-inch Cable w/Deutsch Plug HD 16-3 96S GB (3-Pin Connector) (16 AWG)* *These connectors are designed for dual circuit (SPDT) by default. They can be used for single-circuit applications (SPNC/SPNO) by making suitable connections. Refer to wiring diagram. Safety and Productivity Solutions 11 Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series NOMENCLATURE: MEDIUM PRESSURE, HIGH BURST For example, MHR01500PFPVMAAA01 defines a medium pressure, high burst switch, rising factory set, non-adjustable set point, 150 psi set point, psig, sealed gage pressure unit, 1/4-18 NPT port type, SPST-NO contacts output, stainless steel base, LTNB diaphragm, and spade terminal connectors. P N M AA MH R 01500 P A A 01 Connector Pressure Pressure Actuation/ Packaging Set Point Port Type Output Base Application Type Series Set Point Unit Options Options MH Series Rising Cold-rolled LTNB diaphragm 1/4 in Spade Standard 0,24 bar to 10,34 bar psig, Individually factory set, 1/4-18 NPT SPST-NO N AA R P A P M A 01 steel (Low-temp Buna N) Terminals switch [3.5 psi to 150 psi] sealed gage boxed units Medium non-adjustable Falling HNBR diaphragm With shrink 25 individual Pressure NOTE: Screw bar, sleeve boxes packed in factory set, 1/8-27 NPT SPST-NC Brass (Hydrogenated Nitrile F B B M B N BA C 15 Pressure set point sealed gage Terminals Switch non-adjustable Butadiene Rubber) (plastic coating) bulk packaging is always five digits. Amp Super Seal 1.5 - With shrink EPDM diaphragm Rising, bar, 150 units in Stainless sleeve T For bar, the set point 1/2-20 UNF (Ethylene-Propylene- 282105-1 C V E DA 20 field adjustable* M steel D bulk packaging true gage* Diene Monomer) (3-Pin Connector) (acrylic coating) value will be multiplied by 100 and entered 25 units in Falling, 10-inch Cable, 18 AWG in the listing. For example, psig, 304,8 mm [12 in] C field adjustable* 1/8-27 PTF EA F 25 bulk packaging T D (Wire Out, No Connector) 15,45 Bar is noted as true gage* total wire length 01545. This allows for * Field adjustable option is only 10-inch Cable w/Metripack 150 individual 2 decimal places. psig, With conduit available for: boxes packed in sealed gage 280 Delphi 15300002 30 G G M12 x 1.5 HA 1. Blade and screw terminations E (2-Pin Connector) (18 AWG)* sleeve bulk packaging For psi, the set point with epoxy** (SPDT, SPNO, SPNC) value will be multiplied 2. Deutsch DT04-3P bar, 10-inch Cable w/Deutsch by 10 and entered With Vibra seal DT04-2P-E005 (SPDT, SPNO, SPNC) sealed gage M14 x 1.5 MA in the listing. For example, H F H for threads 3. Amp Superseal 1.5 (3-pin) with epoxy** (2-Pin Connector) (18 AWG) 245.5 psi is noted as 02455. (SPNO & SPNC) This allows for 1 decimal place. 3-inch Cable w/Packard 2P *Blade and screw electrical #8-32 screw with Tower Connector - external tooth terminations are available 9/16-18 UNF J G NA 12015792 (2-Pin Connector) lockwasher*** with only the the true gage (18 AWG) option. 914,4 mm [36 in] 2.75-inch Cable w/Packard 3/4-16 UNF K H **Connector cavity and roll total wire length 2P Shroud Connector - forming area filled with epoxy PA 12010973 (2-Pin Connector) to meet dunk test sealing 304,8 mm [12 in] (18 AWG) total wire length capability. J G1/8 BSPP L 4-inch Cable w/Packard w/ shrink sleeve 2P Shroud Connector - RA 914,4 mm [36 in] 12010973 (2-Pin Connector) total wire length (16 AWG) M L 3/8-24 UNF w/ shrink sleeve 5.5-inch Cable w/ITT ***applicable only for Cannon 2P Sure-Seal screw terminal version. Circular Connector - 7/16-20 UNF SA M SS2R-120-1804-000 (2-Pin Connector) (18 AWG) 4.5-inch Cable w/ 1/4 in P 1/2-14 NPT Spade Terminals 6,3 mm x WA 0,8 mm (16 AWG)* R1/8 BSPT 10-inch Cable w/ Metripack R 2-Pin Shroud Connector XA 153000287 (18 AWG) 6-inch Cable w/Amp M10 × 1.0 T Super Seal 1.5 - 282104-1 YA (2-Pin Connector) (18 AWG)* 10-inch Cable w/Deutsch R1/2 BSPT V DT06-2S-CE06 (2-Socket ZA Connector) (18 AWG) Deutsch DT04-2P-E005 G1/4 BSPP Y AB (2-Pin Connector) 6-inch Cable with Amp R1/4 BSPT Z Super Seal 1.5 - 282080-1 CB (2-Pin Connector) (18 AWG) 10-inch Cable w/AMP 2,5 mm System Series Connector DB 1-967402-1 (18 AWG)* 4.5-inch Cable w/Packard Shroud Connector 12015792 EB (2-Pin Connector) (18 AWG) 10-inch Cable w/Metripack 150 Delphi 12052641 FB (2-Pin Connector) (18 AWG) *These connectors are designed for dual circuit (SPDT) by default. They can be used for single-circuit applications (SPNC/SPNO) by making suitable connections. Refer to wiring diagram. 12 sensing.honeywell.com Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series NOMENCLATURE: MEDIUM PRESSURE For example, MER01500PFPVKAAA01 defines a medium pressure switch, rising factory set, non-adjustable set point, 55 psi set ® point, psig, sealed gage pressure unit, M14 x 1.5 port type, SPST-NO gold-plated contacts output, stainless steel base, Kapton ® diaphragm (Teflon coated), Nitrile O-ring actuation/application, spade terminal connectors, standard switch, individually boxed units. K P V AA ME R 01500 P F A 01 Connector Pressure Pressure Actuation/ Packaging Set Point Port Type Output Base Application Type Series Set Point Unit Options Options ® ME Series Rising Kapton diaphragm Cold-rolled 1/4 in Spade Standard 1,72 bar to 24,13 bar psig, SPST-NO, ® Individually factory set, 1/4-18 NPT N steel with (Teflon coated), AA A 01 R P A P K 1 Terminals switch [25 psi to 350 psi] sealed gage gold-plated contacts boxed units Medium non-adjustable zinc plating Nitrile O-ring ® Falling Kapton diaphragm 25 individual Pressure NOTE: Screw bar, SPST-NC, Stainless With 3 shrink ® boxes packed in factory set, 1/8-27 NPT (Teflon coated), F B B M V H BA B 15 Pressure set point sealed gage steel Terminals sleeve gold-plated contacts 2 Switch non-adjustable EPDM O-ring bulk packaging is always five digits. 1 With shrink Air, Petroleum-based Rising, bar, SPDT-NO/NC, Deutsch DT04-3P-E005 150 units in sleeve T For bar, the set point 1/2-20 UNF hydraulic fluid, engine oil C C CA 20 field adjustable* M Y gold-plated contacts (3-Pin Connector) bulk packaging true gage (plastic coating) 2 value will be multiplied Glycol-based fluid by 100 and entered Amp Super Seal 1.5 - With shrink Falling, NO, with 510 Ω/ 25 units in in the listing. For example, psig, 282105-1 sleeve C field adjustable* 1/8-27 PTF 0.5 W & 160 Ω/ DA D T D E 25 bulk packaging 15,45 Bar is noted as true gage (3-Pin Connector) (acrylic coating) 0.5 W resistors 01545. This allows for * Field adjustable option is only 2 decimal places. psig, 150 individual NC, with 3000 Ω/ 10-inch Cable, 18 AWG With 1/8 W resistor available for: sealed gage boxes packed in EA E 30 G M12 x 1.5 1. Blade and screw terminations E F 0.125 W resistor (Wire Out, No Connector) between terminals bulk packaging For psi, the set point with epoxy (SPDT, SPNO, SPNC) value will be multiplied 10-inch Cable w/Deutsch 2. Deutsch DT04-3P bar, by 10 and entered 304,8 mm [12 in] DT04-3P-E005 (SPDT, SPNO, SPNC) sealed gage M14 x 1.5 in the listing. For example, H FA F F (3-Pin Connector) (16 AWG)* total wire length 3. Amp Superseal 1.5 (3-pin) with epoxy 245.5 psi is noted as 02455. (SPNO & SPNC) This allows for 1 decimal place. 10-inch Cable w/Amp Blade and screw electrical With conduit Super Seal 1.5 - 282105-1 GA terminations are available 9/16-18 UNF G G (3-Pin Connector) (18 AWG)* sleeve with only the the true gage option. 10-inch Cable w/Metripack With Vibra seal 280 Delphi 15300002 3/4-16 UNF HA H H for port threads (2-Pin Connector) (18 AWG)* 10-inch Cable w/ #8-32 screw with Din43650-C G1/8 BSPP external tooth J JA J (3-Pin Connector) (18 AWG)* lockwasher 10-inch Cable w/M12x1 914,4 mm [36 in] (Brad Harrison Micro) - 7/16-20 UNF K M KA total wire length 21032121306 Harting P/N (3-Pin Connector) (18 AWG)* With port neck 10-inch Cable w/Packard R1/8 BSPT R R O-ring for LPS Weatherpack Male Terminal - LA 12020827 (3-Pin Connector) (18 AWG)* *** For screw terminal option only T M10 × 1.0 10-inch Cable w/Deutsch DT04-2P-E005 MA (2-Pin Connector) (18 AWG) V R1/2 BSPT 3-inch Cable w/Packard 2P Tower Connector - NA 12015792 (2-Pin Connector) (18 AWG) G1/4 BSPP Y 2.75-inch Cable w/Packard 2P Shroud Connector - PA 12010973 (2-Pin Connector) R1/4 BSPT Z (18 AWG) 4-inch Cable w/Packard 2P Shroud Connector - RA 12010973 (2-Pin Connector) (16 AWG) 5.5-inch Cable w/ITT Cannon 2P Sure-Seal Circular Connector - SA SS2R-120-1804-000 (2-Pin Connector) (18 AWG) 8.5-inch Cable w/ITT Cannon 3P Sure-Seal Circular Connector - TA SS3R-120-8551-001 (3-Pin Connector) (16 AWG)* 10-inch Cable - Vacuum Impregnated w/Deutsch UA DT06-3S-EP06 (3-Socket Connector) (16 AWG)* 10-inch Cable - Vacuum Impregnated w/Deutsch VA DT04-3P-E005 (3-Pin Connector) (16 AWG)* 4.5-inch Cable w/ 1/4 in Spade Terminals 6,3 mm x WA 0,8 mm (16 AWG)* 10-inch Cable w/ Metripack 2-Pin Shroud Connector XA 153000287 (18 AWG) 6-inch Cable w/Amp Super Seal 1.5 - 282104-1 YA (2-Pin Connector) (18 AWG)* 10-inch Cable w/Deutsch DT06-2S-CE06 (2-Socket ZA Connector) (18 AWG) Deutsch DT04-2P-E005 AB (2-Pin Connector) 10-inch Cable w/Metripack 150 Delphi 12129615 BB (3-Pin Connector) (18 AWG)* 6-inch Cable with Amp Super Seal 1.5 - 282080-1 CB (2-Pin Connector) (18 AWG) 10-inch Cable w/AMP 2,5 mm System Series Connector DB 1-967402-1 (18 AWG)* 4.5-inch Cable w/Packard Shroud Connector 12015792 EB (2-Pin Connector) (18 AWG) 10-inch Cable w/Metripack 150 Delphi 12052641 FB (2-Pin Connector) (18 AWG) 8.5-inch Cable w/Deutsch Plug HD 16-3 96S GB (3-Pin Connector) (16 AWG) *These connectors are designed for dual circuit (SPDT) by default. They can be used for single-circuit applications (SPNC/SPNO) by making suitable connections. Refer to wiring diagram. Safety and Productivity Solutions 13 Honeywell Pressure Switches, HP, HE, MH, ME, LP, LE, 5000, 1000 Series NOMENCLATURE: LOW PRESSURE For example, LPR00550PFPVKAAA01 defines a low pressure switch, rising factory set, non-adjustable set point, 55 psi set ® point, psig, sealed gage pressure unit, M14 x 1.5 port type, SPST-NO gold-plated contacts output, stainless steel base, Kapton ® diaphragm (Teflon coated), Nitrile O-ring actuation/application, spade terminal connectors, standard switch, individually boxed units. K P V AA LP R 00550 P F A 01 Connector Pressure Pressure Actuation/ Packaging Set Point Port Type Output Base Application Type Series Set Point Unit Options Options ® LP Series, Rising Kapton diaphragm 1/4 in Spade Standard 0,24 bar to 10,34 bar psig, SPST-NO, ® Individually Brass factory set, 1/4-18 NPT B (Teflon coated), AA A 01 R P A P K 1 Terminals switch [3.5 psi to 150 psi] sealed gage gold-plated contacts boxed units LE Series non-adjustable Nitrile O-ring ® Falling Cold-rolled Kapton diaphragm 25 individual Low NOTE: Screw bar, SPST-NC, With 3 shrink ® steel with boxes packed in factory set, 1/8-27 NPT (Teflon coated), F B B M N H BA B 15 Pressure set point sealed gage Terminals sleeve gold-plated contacts zinc plating 2 Pressure non-adjustable EPDM O-ring bulk packaging is always five digits. ® ® With shrink Tefzel and Kapton Switch Rising, bar, SPDT-NO/NC, Stainless Deutsch DT04-3P-E005 150 units in sleeve T For bar, the set point 1/2-20 UNF diaphragm, C C V T CA 20 field adjustable* M Y gold-plated contacts steel (3-Pin Connector) bulk packaging true gage 3 (plastic coating) value will be multiplied Nitrile O-ring by 100 and entered ® ® Amp Super Seal 1.5 - With shrink Tefzel and Kapton 25 units in Falling, NO, with 510 Ω/ in the listing. For example, psig, 282105-1 sleeve C diaphragm, field adjustable* 1/8-27 PTF 1 W & 160 Ω/ DA D 25 bulk packaging T D E U 15,45 Bar is noted as true gage 4 (3-Pin Connector)** (acrylic coating) 1 W resistors**** EPDM O-ring 01545. This allows for * Field adjustable option is only 1 150 individual 2 decimal places. psig, Air, Petroleum-based NC, with 3000 Ω/ 10-inch Cable, 18 AWG 304,8 mm [12 in] available for: boxes packed in sealed gage 30 EA F G M12 x 1.5 hydraulic fluid, engine oil 1. Blade and screw terminations E F 0.125 W resistor (Wire Out, No Connector)* total wire length bulk packaging For psi, the set point with epoxy 2 Glycol-based fluid (SPDT, SPNO, SPNC) value will be multiplied 3 10-inch Cable w/Deutsch 2. Deutsch DT04-3P bar, NC with 510 Ω/ For high temperature by 10 and entered With conduit DT04-3P-E005 (SPDT, SPNO, SPNC) sealed gage M14 x 1.5 0.5 W and 160 Ω/ H fluid media (LE Series only) FA G in the listing. For example, F G sleeve (3-Pin Connector) (16 AWG)* 3. Amp Superseal 1.5 (3-pin) with epoxy 0.5 W resistors**** 4 245.5 psi is noted as 02455. For high temperature (SPNO & SPNC) This allows for 1 decimal place. 10-inch Cable w/Amp Blade and screw electrical **** Available only on LP Series fluid media, glycol-based With Vibra seal Super Seal 1.5 - 282105-1 GA H terminations are available 9/16-18 UNF fluid (LE Series only) for port threads G (3-Pin Connector) (18 AWG)* with only the the true gage option. 10-inch Cable w/Metripack 914,4 mm [36 in] 280 Delphi 15300002 3/4-16 UNF HA K H total wire length True gage option is available (2-Pin Connector) (18 AWG)* only up to 20 psig set 10-inch Cable w/ 304,8 mm [12 in] point for integral connectors Din43650-C total wire length with G1/8 BSPP L and wire out electrical J JA acrylic sleeve (3-Pin Connector) (18 AWG)* terminations. 914,4 mm [36 in] 10-inch Cable w/M12x1 (Brad Harrison Micro) - total wire length with 7/16-20 UNF M M KA acrylic sleeve 21032121306 Harting P/N (3-Pin Connector) (18 AWG)* *** For screw terminal option only 10-inch Cable w/Packard R1/8 BSPT R Weatherpack Male Terminal - LA 12020827 (3-Pin Connector) (18 AWG)* T M10 × 1.0 10-inch Cable w/Deutsch DT04-2P-E005 MA (2-Pin Connector) (18 AWG) V R1/2 BSPT 3-inch Cable w/Packard 2P Tower Connector - NA 12015792 (2-Pin Connector) (18 AWG) G1/4 BSPP Y 2.75-inch Cable w/Packard 2P Shroud Connector - PA 12010973 (2-Pin Connector) R1/4 BSPT Z (18 AWG) 4-inch Cable w/Packard 2P Shroud Connector - RA 12010973 (2-Pin Connector) (16 AWG) 5.5-inch Cable w/ITT Cannon 2P Sure-Seal Circular Connector - SA SS2R-120-1804-000 (2-Pin Connector) (18 AWG) 8.5-inch Cable w/ITT Cannon 3P Sure-Seal Circular Connector - TA SS3R-120-8551-001 (3-Pin Connector) (16 AWG)* 10-inch Cable - Vacuum Impregnated w/Deutsch UA DT06-3S-EP06 (3-Socket Connector) (16 AWG)* 10-inch Cable - Vacuum Impregnated w/Deutsch VA DT04-3P-E005 (3-Pin Connector) (16 AWG)* 4.5-inch Cable w/ 1/4 in Spade Terminals 6,3 mm x WA 0,8 mm (16 AWG)* 10-inch Cable w/ Metripack 2-Pin Shroud Connector XA 153000287 (18 AWG) 6-inch Cable w/Amp Super Seal 1.5 - 282104-1 YA (2-Pin Connector) (18 AWG)* 10-inch Cable w/Deutsch DT06-2S-CE06 (2-Socket ZA Connector) (18 AWG) Deutsch DT04-2P-E005 AB (2-Pin Connector) 10-inch Cable w/Metripack 150 Delphi 12129615 BB (3-Pin Connector) (18 AWG)* 6-inch Cable with Amp Super Seal 1.5 - 282080-1 CB (2-Pin Connector) (18 AWG) 10-inch Cable w/AMP 2,5 mm System Series Connector DB 1-967402-1 (18 AWG)* 4.5-inch Cable w/Packard Shroud Connector 12015792 EB (2-Pin Connector) (18 AWG) 10-inch Cable w/Metripack 150 Delphi 12052641 FB (2-Pin Connector) (18 AWG) 8.5-inch Cable w/Deutsch Plug HD 16-3 96S GB (3-Pin Connector) (16 AWG) *These connectors are designed for dual circuit (SPDT) by default. They can be used for single-circuit applications (SPNC/SPNO) by making suitable connections. Refer to wiring diagram. **For electrical termination with SPST option, only SPNO configuration is available. SPNC configuration cannot be provided. 14 sensing.honeywell.com m WARNING ADDITIONAL MATERIALS PERSONAL INJURY The following associated literature is available at DO NOT USE these products as safety or emergency stop sensing.honeywell.com: devices or in any other application where failure of the • Product range guide product could result in personal injury. • Product line guide Failure to comply with these instructions could result in death or serious injury. • Technical note: Smart Diagnostic Technology • Product application-specific information – Application Note: Honeywell Pressure Switches m WARNING – Sensors and switches in front loaders MISUSE OF DOCUMENTATION • The information presented in this product sheet is for – Sensors and switches in mobile cranes reference only. Do not use this document as a product – Sensors and switches in oil rig applications installation guide. – Industrial product line card • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the appli- cable warranty period. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defec- tive. The foregoing is buyer’s sole remedy and is in lieu of all Find out more other warranties, expressed or implied, including those of Honeywell serves its customers merchantability and fitness for a particular purpose. In no through a worldwide network event shall Honeywell be liable for consequential, special, of sales offices, representatives or indirect damages. and distributors. For While Honeywell may provide application assistance personally, application assistance, current through our literature and the Honeywell web site, it is buyer’s specifications, pricing or name sole responsibility to determine the suitability of the product in of the nearest Authorized the application. Distributor, contact your local Specifications may change without notice. The information we sales office. To learn more supply is believed to be accurate and reliable as of this writing. about Honeywell’s sensing and However, Honeywell assumes no responsibility for its use. switching products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Honeywell Safety and Productivity Solutions 9680 Old Bailes Road 50094081-5-EN IL50 GLO  Fort Mill, SC 29707 October 2016 honeywell.com © 2016 Honeywell International Inc. All rights reserved. ® ® ® ® DuPont™, Teflon , Tefzel , and Kapton are trademarks or registered trademarks of E.I. du Pont de Nemours and Company