HONEYWELL SPTMA0010PG4B

SPT Series Low Cost, Stainless Steel Media Isolated Pressure Sensors DESCRIPTION Honeywell’s SPT Series stainless steel pressure sensors are All versions feature a variety of pressure connections to allow designed for media that will not adversely attack 316L stainless use in a wide range of OEM (Original Equipment Manufacturer) steel. equipment. The back side metal tube is made from 304 stainless steel The SPT Series stainless steel devices are rugged and reliable which provides effective protection against most harsh transducers for use in a wide variety of pressure sensing environments. The SPT Series is calibrated and compensated applications where corrosive liquids and gases are monitored. for three styles of output: 4.0 mA to 20.0 mA (mA version); 1.0 Vdc to 5.0 Vdc (4 V version); and 0 mV to 100 mV (mV version). FEATURES POTENTIAL APPLICATIONS • Reliable semiconductor technology • Industrial automation and flow control • Calibrated and temperature compensated • Pressure instrumentation • Rugged, stainless steel package • Hydraulic systems • NEMA 4 design • Process control • Small size • Absolute, gage, sealed gage, vacuum gage pressures • 0 psi to 3 psi, 0 psi to 5000 psi SPT Series Table 1. Specifications Characteristic Parameter Environmental specifications Compensated temperature range -10 °C to 85 °C [14 °F to 185 °F] Operating temperature range -40 °C to 85 °C [-40 °F to 185 °F] Storage temperature range -40 °C to 85 °C [-40 °F to 185 °F] Vibration 10 G at 20 Hz to 2000 Hz Shock 100 G for 11 ms Insulation resistance 100 MΩ at 50 Vdc Recommended supply range SPT mA supply voltage +12.5 Vdc to +24 Vdc SPT 4V Supply voltage V +12.5 Vdc to +24 Vdc S Quiescent current I 5 mA QSC Short circuit current I 18 mA SC SPT mV supply voltage V +10 Vdc S Maximum supply ratings SPT mV supply voltage V +15 Vdc S SPT mA and SPT 4V supply voltage V +24 Vdc S Table 2. Pressure Range Specifications 1 2 3 Catalog Listing Pressure Range Proof Pressure Burst Pressure SPT (mA, mV, 4V) 0003P G (4,5,6,7,9) (B/WXX) 0 psig to 3 psig 9 psig 15 psig SPT (mA, mV, 4V) 0005P G (4,5,6,7,9) (B/WXX) 0 psig to 5 psig 15 psig 25 psig SPT (mA, mV, 4V) 0010P G (4,5,6,7,9) (B/WXX) 0 psig to 10 psig 30 psig 50 psig SPT (mA, mV, 4V) 0015P (A,G,V) (4,5,6,7,9) (B/WXX) 0 psi to 15 psi 45 psi 75 psi SPT (mA, mV, 4V) 0030P (A,G,V) (4,5,6,7,9) (B/WXX) 0 psi to 30 psi 90 psi 150 psi SPT (mA, mV, 4V) 0050P (A,G,V) (4,5,6,7,9) (B/WXX) 0 psi to 50 psi 150 psi 250 psi SPT (mA, mV, 4V) 0100P (A,G,V) (4,5,6,7,9) (B/WXX) 0 psi to 100 psi 300 psi 500 psi SPT (mA, mV, 4V) 0200P (A,G,V) (4,5,6,7,9) (B/WXX) 0 psi to 200 psi 600 psi 100 psi SPT (mA, mV, 4V) 0300P (A,G,V) (4,5,6,7,9) (B/WXX) 0 psi to 300 psi 900 psi 1500 psi SPT (mA, mV, 4V) 0500P (A,G,V) (4,5,6,7,9) (B/WXX) 0 psi to 500 psi 1200 psi 2400 psi SPT (mA, mV, 4V) 1000P (A,S) (4,5,6,7) (B/WXX) 0 psi to 1000 psi 3000 psia 5000 psia SPT (mA, mV, 4V) 2000P (A,S) (4,5,6,7) (B/WXX) 0 psi to 2000 psi 6000 psia 10000 psia SPT (mA, mV, 4V) 3000P (A,S) (4,5,6,7) (B/WXX) 0 psi to 3000 psi 9000 psia 10000 psia SPT (mA, mV, 4V) 5000P (A,S) (4,5,6,7) (B/WXX) 0 psi to 5000 psi 10000 psia 10000 psia Notes: 1. Vacuum gage units (V option) allow you to pull a hard vacuum on the gage units. Vacuum gage parts are only available on the mV version in 15 psig through 500 psig. As sold, this package design is not submersible. In order to make the package submersible, the package needs to be sealed. 2. The maximum pressure that can be applied without changing the transducer’s performance or accuracy. 3. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer case. 2 www.honeywell.com/sensing Low Cost, Stainless Steel Media Isolated Pressure Sensors 1 Table 3. Performance Specifications Characteristic Minimum Typical Maximum Unit SPT mV Version Zero pressure offset -2 0 +2 mV 2 Full-scale span (0 psig to 3 psig and 0 psig-5 psig only) 48 50 52 mV 2 Full-scale span (0 psi to10 psi and 0 psi to 3000 psi only) 98 100 102 mV 2 Full-scale span (0 psi to 5000 psi only) 148 150 152 mV 3 Pressure non-linearity – ±0.1 ±0.25 %FSS 3 Pressure hysteresis – ±0.015 ±0.030 %FSS Repeatability – ±0.010 ±0.030 %FSS 4 Temp. effect on span – ±0.5 ±1.0 %FSS 4 Temp. effect on offset – ±0.5 ±1.0 %FSS 4 Temp. effect on span (0 psi to 3 psi and 0 psi to 5 psi only) – ±1 ±2.0 %FSS 4 Temp. effect on offset (0 psi to 3 psi and 0 psi to 5 psi only) – ±1 ±2.0 %FSS Thermal hysteresis (-10 °C to 85 °C [14 °F to 185 °F]) – ±0.1 ±0.3 %FSS 5 Long-term stability of offset and span – ±0.1 ±0.3 %FSS 6 Response time – 0.1 – ms 7 Common mode voltage (voltage version “K”) 0.5 1.25 2.0 Vdc Input resistance 8.0 25 50 kΩ Output resistance 3.0 4.5 6.0 kΩ SPT mA Version Zero pressure offset 3.84 4.0 4.16 mA 2 Full-scale span 15.84 16.0 16.16 mA 3 Pressure non-linearity – ±0.1 ±0.25 %FSS 3 Pressure hysteresis – ±0.015 ±0.03 %FSS Repeatability – ±0.010 ±0.030 %FSS 4 Temp. effect on span – ±0.5 ±1.5 %FSS 4 Temp. effect on offset – ±0.5 ±1.5 %FSS 4 Temp. effect on span (0 psi to 3 psi and 0 psi to 5 psi only) – ±1.5 ±2.5 %FSS 4 Temp. effect on offset (0 psi to 3 psi and 0 psi to 5 psi only) – ±1.5 ±2.5 %FSS Thermal hysteresis -10 °C to 85 °C [14 °F to 185 °F] – ±0.1 ±0.3 %FSS 5 Long term stability of offset and span – ±0.1 ±0.3 %FSS 6 Response time – 5 – ms SPT 4V Version Zero pressure offset 0.96 1.0 1.04 V 2 Full-scale span 3.96 4.0 4.04 V 3 Pressure non-linearity – ±0.1 ±0.25 %FSS 3 Pressure hysteresis – ±0.015 ±0.03 %FSS Repeatability – ±0.010 ±0.030 %FSS 4 Temp. effect on span – ±0.5 ±1.5 %FSS 4 Temp. effect on offset – ±0.5 ±1.5 %FSS 4 Temp. effect on span (0 psi to 3 psi and 0 psi to 5 psi only) – ±1.5 ±2.5 %FSS 4 Temp. effect on offset (0 psi to 3 psi and 0 psi to 5 psi only) – ±1.5 ±2.5 %FSS Thermal hysteresis -10 °C to 85 °C [14 °F to 185 °F] – ±0.1 ±0.3 %FSS 5 Long term stability of offset and span – ±0.1 ±0.3 %FSS 6 Response time – 5 – ms Notes: 1. Reference conditions (unless otherwise noted): T = 25 °C [77 °F]; For SPTmA and SPT4V, Supply V = 23.5 Vdc ±0.01 Vdc; for SPTmV: A S V = 10 Vdc. S 2. Full-scale span (FSS) is the algebraic difference between the output voltage at full-scale positive pressure and the output at zero pressure. FSS is ratiometric to the supply voltage. 3. Pressure non-linearity is based on best-fit straight line from zero to the full-scale pressure. Pressure hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. 4. Maximum error band of the offset voltage or span over the compensated temperature range, relative to the 25 °C [77 °F] reading. 5. Long-term stability over a six-month period. 6. Response time for a 0 psi to FSS pressure step change, 10% to 90% rise time. 7. Common mode voltage as measure from output to ground. Honeywell Sensing and Control 3 Figure 1. Equivalent Basic Circuits SPT mA SPT 4V SPT mV Figure 2. SPT mA Version External Load Line Figure 3. Pinout and Wire Code for all Package Styles MOUNTING DIMENSIONS (For reference only, in (mm).) Figure 4: Package 4: 1/8-27 NPT Port *Bayonet termination is dimensionally equivalent to an Amphenol Bendix PTIH-8-4P. 4 www.honeywell.com/sensing Low Cost, Stainless Steel Media Isolated Pressure Sensors Figure 5. Package 5: 1/4-18 NPT Port Figure 6. Package 6: 7/16-20 UNF Port *Bayonet termination is dimensionally equivalent to an Amphenol Bendix PTIH-8-4P. Honeywell Sensing and Control 5 Figure 7. Package 7: 1/4-19 BSPP Port Figure 8. Package 9: VCR Port *Bayonet termination is dimensionally equivalent to an Amphenol Bendix PTIH-8-4P. 6 www.honeywell.com/sensing Low Cost, Stainless Steel Media Isolated Pressure Sensors Order Guide SPT mA SPT mV SPT 4V Honeywell Sensing and Control 7 WARNING WARNING PERSONAL INJURY MISUSE OF DOCUMENTATION DO NOT USE these products as safety or emergency stop • The information presented in this product sheet is for devices or in any other application where failure of the reference only. Do not use this document as a product product could result in personal injury. installation guide. Failure to comply with these instructions could result in • Complete installation, operation, and maintenance death or serious injury. information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in WARRANTY/REMEDY death or serious injury. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise SALES AND SERVICE by Honeywell in writing; please refer to your order Honeywell serves its customers through a worldwide network acknowledgement or consult your local sales office for specific of sales offices, representatives and distributors. For warranty details. If warranted goods are returned to Honeywell application assistance, current specifications, pricing or name during the period of coverage, Honeywell will repair or replace, of the nearest Authorized Distributor, contact your local sales at its option, without charge those items it finds defective. The office or: foregoing is buyer’s sole remedy and is in lieu of all other E-mail: info.sc@honeywell.com warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no Internet: www.honeywell.com/sensing event shall Honeywell be liable for consequential, special, or indirect damages. Phone and Fax: Asia Pacific +65 6355-2828 While we provide application assistance personally, through +65 6445-3033 Fax our literature and the Honeywell web site, it is up to the Europe +44 (0) 1698 481481 customer to determine the suitability of the product in the +44 (0) 1698 481676 Fax application. Latin America +1-305-805-8188 +1-305-883-8257 Fax Specifications may change without notice. The information we USA/Canada +1-800-537-6945 supply is believed to be accurate and reliable as of this +1-815-235-6847 printing. However, we assume no responsibility for its use. +1-815-235-6545 Fax Sensing and Control Honeywell 1985 Douglas Drive North 008133-2-EN IL50 GLO Printed in USA Golden Valley, MN 55422 August 2009 www.honeywell.com/sensing Copyright © 2009 Honeywell International Inc. All rights reserved.