HONEYWELL ST100PG2BPRF

Stainless Steel Pressure Sensors ST Series FEATURES • Amplified output which eliminates the cost of external amplifiers • Reverse polarity protection prevents damaged from reversed excitation • Less than 500 µs response time for accurate high speed measurements • Exceeds CE Heavy Industrial EMC • High value with outstanding performance TYPICAL APPLICATIONS • Pneumatic equipment • Air compressors • Air filtration monitoring The Model ST pressure transducer combines Honeywell's proven silicon • Industrial controls pressure sensing with the latest in ASIC technology in a rugged, industrial package. High value, coupled with outstanding performance, make this an ideal transducer for industrial control applications such as air compressors and pneumatic equipment. Temperature compensated, calibrated, and amplified, the ST has pressure ranges from 0 psi to 5.0 psi to 0 psi to 250 psi. The ST offers three standard output options for user flexibility, which are as follows: a 0.50 Vdc to 4.50 Vdc ratiometric output from 5.0 Vdc excitation, a 0.50 Vdc to 4.50 Vdc regulated output from 7.0 Vdc to 35.0 Vdc excitation, or a 4 mA to 20 mA output from 9.5 Vdc to 35.0 Vdc. The ST transducer delivers ±1.0% full scale accuracy (BFSL) over a wide temperature range of -40 °C to 100 °C [-40 °F to 212 °F] and utilizes a proven industry standard connector for high reliability. WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or WARNING in any other application MISUSE OF DOCUMENTATION where failure of the product • The information presented in this product sheet is for reference only. Do could result in personal injury. not use this document as a product installation guide. Failure to comply with • Complete installation, operation, and maintenance information is these instructions could provided in the instructions supplied with each product. result in death or serious Failure to comply with these instructions could result in death or injury. serious injury. Sensing and Control Stainless Steel Pressure Sensors ST Series SPECIFICATIONS 1 Pressure Ranges psig 0 to 5.0, 10.0, 15.0, 25.0, 50.0, 100, 150, 200, and 250 bar 0 to 0.4, 0.6, 1.0, 1.6, 2.5, 4.0, 6.0, 10.0, and 16.0 Physical Proof Pressure ≤150 psi [6.0 bar], 3 X rated range >150 psi [6.0 bar], 2 X rated range Burst Pressure ≤100 psi [6.0 bar], 5 X rated range >100 psi [6.0 bar], 3 X rated range Material in contact with 300 series stainless steel or brass, internal seal, silicon, polyetherimide media Weight 2.0 oz [57.0 gm] 2 Environmental Shock 50 g’s peak [5 milliseconds] Vibration Figure 514.2-5, Curve AK, Table 514.2-V, Random Vibration Test [Overall g rms = 20.7 minimum] 3 Electrical Voltage Current Null Offset 0.5 Vdc 4.0 MA Span 4.0 Vdc [0.50 Vdc to 4.50 Vdc] 16 mA [4 mA to 20 mA] Excitation Ratiometric 5.0 Vdc ±250 mV [7.0 Vdc max.] 9.5 Vdc to 35.0 Vdc Regulated 7.0 Vdc to 35.0 Vdc Supply Current 5.0 mA typical [7.0 mA max.] N/A Source (nominal) 2.0 mA N/A Sink (nominal) 20 µA @ zero output N/A Supply Rejection Ratio 90 decibels N/A Output Impedance 25 Ω max. N/A 3 Performance Response Time < 500 µs EMI/RFI Exceeds CE heavy industrial [30v/m radiated 150 kHz to 1 gHz] TM Electrical Connection Packard Metri-Pack requires mating connector P/N3685901 (order separately) Accuracy ±1.0% F.S.O. best fit straight line includes: non-linearity, hysteresis, non- repeatability. Thermal errors are not included. Total Error Band ±2% F.S.O. Includes: zero offset error, span error, thermal effect on zero and thermal effect on span, non-linearity, hysteresis, non-repeatability Compensated Operating and Range -40 °C to 100 °C [-40 °F to 212 °F] Storage Temperature Range Notes: 1. Contact the factory to discuss other pressure ranges. 2. Meets IEC-68-2 or MIL-STD 810C. 3. All specifications are measured at 25 °C [77 °F] and at rated excitation unless otherwise specified. 2 Honeywell • Sensing and Control Stainless Steel Pressure Sensors ST Series HOW TO ORDER ST 100 P G 1 S P G F Internal Seal Series Material F = Fluorosilicone Range PSI BAR Output G = 4 mA to 20 mA 004 005 100 0R4* R = 0.5 Vdc to 4.5 Vdc Regulated 006 010 150 0R6* C = 0.5 Vdc to 4.5 Vdc Ratiometric 010 015 200 001 016 025 250 1R6* Termination 050 2R5* P = Packard Unit Port Material P = PSI B = BAR S = Stainless Steel B = Brass Pressure Reference Connections 1 = 1/8-27 NPT G = Gage (psig) V = Vacuum** 2 = 1/4-18 NPT 6 = G1/4-19 BSP * The character R replaces the decimal point in fractional pressure ranges. ** For 015 pressure range only, full scale output at -14.7 psi. Note: Not all combinations are available. Minimum quantity orders apply. Contact Honeywell for more details Honeywell • Sensing and Control 3 Stainless Steel Pressure Sensors ST Series DIMENSIONS (for reference only) mm (in) * 1/4-18 NPT and G1/4-19 BSP configurations are both optional. Contact Honeywell to discuss other pressure port options. PIN AND WIRE CODES Pins Voltage Current a + Excitation + Excitation b Output - Excitation c Common No Connection WARRANTY/REMEDY Honeywell warrants goods of its manufacture as While we provide application assistance personally, being free of defective materials and faulty through our literature and the Honeywell web site, it workmanship. Contact your local sales office for is up to the customer to determine the suitability of warranty information. If warranted goods are the product in the application. returned to Honeywell during the period of coverage, For application assistance, current specifications, or Honeywell will repair or replace without charge those name of the nearest Authorized Distributor, contact a items it finds defective. The foregoing is Buyer’s nearby sales office. Or call: sole remedy and is in lieu of all other warranties, 1-800-537-6945 USA expressed or implied, including those of 1-800-737-3360 Canada merchantability and fitness for a particular 1-815-235-6847 International purpose. FAX Specifications may change without notice. The 1-815-235-6545 USA information we supply is believed to be accurate and INTERNET reliable as of this printing. However, we assume no www.honeywell.com/sensing responsibility for its use. info.sc@honeywell.com Sensing and Control Honeywell 11 West Spring Street Freeport, Illinois 61032 008083-1-EN IL50 GLO 803 Printed in USA www.honeywell.com/sensing Copyright 2003 Honeywell International Inc.