HONEYWELL ZW10E70FD1

MICRO SWITCH™ Sealed Subminiature Basic Switches ZW Series Datasheet MICRO SWITCH™ ZW Series Sealed Subminiature Basic Switches Honeywell’s MICRO SWITCH™ ZW Series is a sealed subminiature snap action switch from the Honeywell family of Z Series subminiature basic switches. Although small in size, the ZW Series is rated for controlling electrical loads ranging from logic level/computer-based circuits to power-duty switching (up to 6 amps and up to 250 Vac). Switches supplied with integral wire leads are sealed to IP67 and are suitable for applications where a switch assembly would be exposed to liquids or particulate contaminates in the environment from indoor or outdoor use. A wide variety of stainless steel levers are available and when combined with the subminiature package size, can adapt the switch for many different applications. The ZW Series is certified to UL, cUL, ENEC, and CQC for worldwide use. What makes our switches better? The IP67-rated sealed switch is designed to operate in a variety of demanding applications, reducing the challenge of harsh environments Wide variety of electrical current carrying capacity allows for a solution in many systems Switch package designed to accommodate a wide range of temperature requirements For worldwide use... RIGHT SWITCH FOR THE RIGHT APPLICATION HARSH ENVIRONMENTS • RELIABILITY • ELECTRICAL RATING sensing.honeywell.com 2 SMALL PACKAGE SIZE F Fe ea at tu ur re es s Subminiature package size allows the MICRO SWITCH™ ZW Series switch to a an nd d Be Ben ne efit fits s fit in many applications where other sensors or switches are too large. IP67 sealing: pre-wired switches WELL SUITED FOR POWER-DUTY AND LOGIC-LEVEL LOADS SPDT, SPNC, or SPNO switch options are available and designed to meet various circuit requirements. ZW Series can control power-duty switching with silver contacts or logic-level computer-based circuits with gold-plated contacts. PERFORMS IN WET, DIRTY, AND DUSTY ENVIRONMENTS Catalog listings with integral lead wires are sealed to IP67 for use in environments where exposure to liquid ingress or particulate contaminant could occur. DESIGN FLEXIBILITY Switches are built with an integral sealed pin plunger. Various styles of levers expand the versatility of the ZW Series switch in the application. In addition, the ZW Series features a variety of terminations to promote flexibility for the electrical connectivity. Potential Applications LAWN TRACTORS Reverse alarm for lawn tractors Indicates seat use on lawn tractors WATERCRAFT Found on handle-bar controls for personal watercraft (wave runners) SECURITY SYSTEMS Acts as an interlock for security system panel SNOWMOBILES Found on handle-bar controls for snowmobiles sensing.honeywell.com 3 ZW Series PRODUCT NOMENCLATURE ZW A 50 F 15 D 1 — 4 3 Actuator Type Current Operating Force Terminal Special Switch Type Construction Circuitry (Levers Mounted Internally) 3 (at pin plunger) Rating Type Designator A special designator ZW Series 0.1A 125/250 Vac IP00 Solder Pin plunger (Gold-plated 150 g max. is used to indicate 10 15 A D 1 SPDT E Dust tight Sealed contacts) a non-standard feature, such as a special Subminiature 6A: 125/250 Vac Short straight IP67 203 g max. 2 PCB, straight actuator, wire color, 50 F SPNO 20 B W 3 (Silver contacts) lever (17,4 mm) Water tight ONLY Basic wire length, connector, Long solder etc. This code Switch Standard straight 2 2,8 mm x 0,5 mm SPNC consists of up to three 70 C 4 lever (19,4 mm) [0.11 in x 0.02 in] alphanumeric Cable, bottom characters. Long straight exit (500 mm) 90 D lever (25,5 mm) 4,5 (UL10007 Dia 1.0) Cable, side exit Simulated roller 91 (Opposite plunger) lever (18,7 mm; E 4,5 (500 mm) (UL1007 Dia) R 3,4 mm) Cable, side exit Roller lever (Plunger end) 92 (17,2 mm; F 4,5 (500 mm) (UL1007 Dia) Ø 4,8 mm) Small simulated 3 SPECIAL 99 roller lever H (18,6 mm; R1,3 mm) Long straight J lever (55,9 mm) SPECIAL S 2 Lever NOTES: 1 Not all combinations of model code are available. Please contact your Honeywell provider/representative for assistance. 2 Termination style “99” and/or Actuator Type “S” designates a special and therefore requires a special designator letter at the end of the listing 3 Lever length is measured as follows: Straight lever - from center line of the pivot to the end of the lever; Roller and simulated roller lever - from the center line of the pivot to the center of the roller diameter. See page 8 for more details. 4 Standard wire length is 500 mm [19.68 in] long. Other lengths are available upon request. Lead wire with end stripped 3,0 mm [0.118 in] and pre-tinned. COM: black; NC: gray; NO: blue 5 Standard lead wire is UL1007 20 AWG cable. Other lead wire types, such as UL1015, UL1430, UL1061, and AVSS are available upon request. - sensing.honeywell.com 4 MICRO SWITCH™ Sealed Subminiature Basic Switches Table 1. Specifications Characteristic ZW10 Series (Logic Level) ZW50 Series (Power Duty) Circuitry SPDT, SPNC, SPNO SPDT, SPNC, SPNO Operating force 150 g or 203 g @ plunger 150 g or 203 g @ plunger Termination PCB, solder, prewired PCB, solder, prewired Sealing IP67 (prewired), IP00 for exposed terminals IP67 (prewired), IP00 for exposed terminals Actuators (levers 300 series pin plunger, flat lever, roller lever, sim. roller lever, pin plunger, flat lever, roller lever, sim. roller lever, stainless steel) special levers special levers Agency certification UL, cUL, ENEC, CQC, RoHS compliant UL, cUL, ENEC, CQC, RoHS compliant Operating temperature -40 °C to 120 °C [-40 °F to 248 °F] (terminal) -40 °C to 120 °C [-40 °F to 248 °F] (terminal) (Manufacturer rated) -20 °C to 70 °C [-4 °F to 158 °F] (pre-wired) -20 °C to 70 °C [-4 °F to 158 °F] (pre-wired) Mechanical endurance (cycles) 1,000,000 min. @ 120 cycles/minute max. 1,000,000 min. @ 120 cycles/minute max. Switch resistance (initial) 50 mΩ max. (terminals); 100 mΩ max (pre-wired) 50 mΩ max. (terminals); 100 mΩ max (pre-wired) Insulation resistance (initial) 100 MΩ min. (500 Vdc for one minute) 100 MΩ min. (500 Vdc for one minute) Dielectric strength (initial) 1500 VRMS for one minute 1500 VRMS for one minute (between live parts and ground) <0.5 mA leakage current <0.5 mA leakage current Plunger seal silicone silicone Contact material gold-plated silver silver Housing material case, PBT (polyester); cover, PBT (polyester) case, PBT (polyester); cover, PBT (polyester) Note: Refer to engineering drawing for additional information. Table 2. Electrical Ratings CQC (Asia-Pacific) ENEC (Europe) UL, cUL (Americas) Switch option Per GB 15092-1 Per IEC 61058-1 UL 61058-1, File 12252 ZW10 Series 0.1 A, 125/250 Vac 0.1 A, 250 Vac 0.1 RA, 125/250 Vac (Gold-plated contacts) 10,000 cycles 10,000 cycles 10,000 cycles ZW50 Series 6 A, 125/250 Vac 6 A, 250 Vac 5 RA, 125/250 Vac (Silver contacts) 10,000 cycles 10,000 cycles 10,000 cycles Note: The agency “use temperature” for solder or PCB terminals: 0 °C to 120 °C [32 °F to 248 °F]; CQC/ENEC “use temperature” for wire leads: 0 °C to 70 °C [32 °F to 158 °F]. UL/cUL “use temperature” for wire leads: 0 °C to 55 °C [32 °F to 131 °F]. sensing.honeywell.com 5 ZW Series O.F. • Operating force R.F. • Release force P.T. • Pretravel O.T. • Overtravel PRODUCT SPECIFICATIONS AND LISTINGS D.T. • Differential travel Contact your Honeywell rep or distributor for additional listings O.P. • Operating position O.P. from mounting O.P. from base of Elect. Circuitry/ O.F. max. R.F. max. Rating hole terminal Catalog Listing Actuator Contact Termination P.T. max. O.T. min. D.T. max. Spec. N [g] N [g] mm [in] mm [in] Material (page 5) (see page 8) (see page 8) SPDT/ 11,5 ±0,3 ZW10F20AD1 Pin plunger 0.1 A PCB 2,00 N [203 g] 0,49 N [50 g] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] Gold plate [0.45 ±0.012] SPDT/ Wire leads, bottom exit 8,4 ±0,3 ZW10F90AW1 Pin plunger 0.1 A 2,00 N [203 g] 0,49 N [50 g] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] Gold plate (500 mm) [0.33 ±0.012] SPDT/ 8,4 ±0,3 ZW50F15AD1 Pin plunger 6 A Solder 2,00 N [203 g] 0,49 N [50 g] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] Silver [0.33 ±0.012] SPDT/ Wire leads, bottom exit 8,4 ±0,3 ZW50F90AW1 Pin plunger 6 A 2,00 N [203 g] 0,49 N [50 g] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] Pin plunger Silver (500 mm) [0.33 ±0.012] SPNO/ Wire leads, side exit, 8,4 ±0,3 ZW50F92AW3 Pin plunger 6 A 2,00 N [203 g] 0,49 N [50 g] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] Silver plunger side (500 mm) [0.33 ±0.012] Standard straight lever, SPDT/ 8,8 ±1,2 ZW10E15CD1 0.1 A Solder 0,54 N [55 g] 0,11 N [11 g] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in] 19,4 mm [0.76 in] Gold plate [0.35 ±0.047] Standard straight lever, SPNO/ Wire leads, bottom exit 8,8 ±1,2 ZW50F90CW3 6 A 0,65 N [66 g] 0,13 N [13 g] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in] 19,4 mm [0.76 in] Silver (500 mm) [0.35 ±0.047] Standard straight lever, SPNO/ Wire leads, side exit, 8,8 ±1,2 ZW50F92CW3 6 A 0,65 N [66] g 0,13 N [13 g] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in] Std. straight lever 19,4 mm [0.76 in] Silver plunger side (500 mm) [0.35 ±0.047] Long straight lever, SPDT/ Wire leads, bottom exit 8,8 ±1,6 ZW50F90DW1 6 A 0,53 N [54 g] 0,11 N [11 g] – 6,3 mm [0.25 in] 1,6 mm [0.06 in] 0,9 mm [0.04 in] 25,5 mm [1.0 in] Silver (500 mm) [0.35 ±0.063] Longer straight lever, SPDT/ Wire leads, bottom exit 8,8 ±3,5 ZW50F90JW1 6 A 0,32 N [33 g] 0,07 N [7 g] – 13,8 mm [0.54 in] 2,9 mm [0.11 in] 3,60 mm [0.14 in] 52,9 mm [2.20 in] Silver (500 mm) [0.34 ±0.138] Long straight lever Sim. roller lever, SPNO/ Wire leads, bottom exit 11,7 ±1,15 ZW50F90EW3 18,65 mm [0.73 in] 6 A 0,68 N [69 g] 0,13 N [13 g] – 4,7 mm [0.18 in] 0,9 mm [0.04 in] 0,75 mm [0.03 in] Silver (500 mm) [0.46 ±0.045] radius: 3,4 mm [0.13 in] Sim. roller lever Small radius, sim. roller lever, SPDT/ Wire leads, bottom exit 10,7 ±1,2 ZW50F90HW1 18,6 mm [0.73 in] 6 A 0,67 N [68 g] 0,14 N [14 g] – 4,6 mm [0.18 in] 1,0 mm [0.04 in] 0,75 mm [0.03 in] Silver (500 mm) [0.42 ±0.047] radius: 1,3 mm [0.05 in] Small radius, sim. roller lever, Wire leads, side exit, SPDT/ 10,7 ±1,2 ZW50F91HW1 18,6 mm [0.73 in] 6 A opposite plunger 0,67 N [68 g] 0,14 N [14 g] – 4,6 mm [0.18 in] 1,0 mm [0.04 in] 0,75 mm [0.03 in] Silver [0.42 ±0.047] Sim. roller lever radius: 1,3 mm [0.05 in] (500 mm) Roller lever, SPDT/ 14,5 ±1,1 ZW10E70FD1 0.1 A Solder (long terminal) 0,59 N [60 g] 0,12 N [12 g] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in] 17,2 mm [0.68 in] Gold plate [0.57 ±0.043] Roller lever SPDT/ Wire leads, bottom exit 14,5 ±1,1 ZW10E90FW1 0.1 A 0,59 N [60 g] 0,12 N [12 g] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in] 17,2 mm [0.68 in] Gold plate (500 mm) [0.57 ±0.043] Roller lever SPDT/ Wire leads, bottom exit 14,5 ±1.1 ZW50F90FW1 6 A 0,71 N [72 g] 0,15 N [15 g] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in] Roller lever 17,2 mm [0.68 in] Silver (500 mm) [0.57 ±0.043] sensing.honeywell.com 6 MICRO SWITCH™ Sealed Subminiature Basic Switches O.F. • Operating force R.F. • Release force P.T. • Pretravel O.T. • Overtravel D.T. • Differential travel O.P. • Operating position O.P. from mounting O.P. from base of Elect. Circuitry/ O.F. max. R.F. max. Rating hole terminal Catalog Listing Actuator Contact Termination P.T. max. O.T. min. D.T. max. Spec. N [g] N [g] mm [in] mm [in] Material (page 5) (see page 8) (see page 8) SPDT/ 11,5 ±0,3 ZW10F20AD1 Pin plunger 0.1 A PCB 2,00 N [203 g] 0,49 N [50 g] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] Gold plate [0.45 ±0.012] SPDT/ Wire leads, bottom exit 8,4 ±0,3 ZW10F90AW1 Pin plunger 0.1 A 2,00 N [203 g] 0,49 N [50 g] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] Gold plate (500 mm) [0.33 ±0.012] SPDT/ 8,4 ±0,3 ZW50F15AD1 Pin plunger 6 A Solder 2,00 N [203 g] 0,49 N [50 g] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] Silver [0.33 ±0.012] SPDT/ Wire leads, bottom exit 8,4 ±0,3 ZW50F90AW1 Pin plunger 6 A 2,00 N [203 g] 0,49 N [50 g] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] Pin plunger Silver (500 mm) [0.33 ±0.012] SPNO/ Wire leads, side exit, 8,4 ±0,3 ZW50F92AW3 Pin plunger 6 A 2,00 N [203 g] 0,49 N [50 g] – 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] Silver plunger side (500 mm) [0.33 ±0.012] Standard straight lever, SPDT/ 8,8 ±1,2 ZW10E15CD1 0.1 A Solder 0,54 N [55 g] 0,11 N [11 g] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in] 19,4 mm [0.76 in] Gold plate [0.35 ±0.047] Standard straight lever, SPNO/ Wire leads, bottom exit 8,8 ±1,2 ZW50F90CW3 6 A 0,65 N [66 g] 0,13 N [13 g] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in] 19,4 mm [0.76 in] Silver (500 mm) [0.35 ±0.047] Standard straight lever, SPNO/ Wire leads, side exit, 8,8 ±1,2 ZW50F92CW3 6 A 0,65 N [66] g 0,13 N [13 g] – 4,8 mm [0.19 in] 1,0 mm [0.04 in] 0,7 mm [0.03 in] Std. straight lever 19,4 mm [0.76 in] Silver plunger side (500 mm) [0.35 ±0.047] Long straight lever, SPDT/ Wire leads, bottom exit 8,8 ±1,6 ZW50F90DW1 6 A 0,53 N [54 g] 0,11 N [11 g] – 6,3 mm [0.25 in] 1,6 mm [0.06 in] 0,9 mm [0.04 in] 25,5 mm [1.0 in] Silver (500 mm) [0.35 ±0.063] Longer straight lever, SPDT/ Wire leads, bottom exit 8,8 ±3,5 ZW50F90JW1 6 A 0,32 N [33 g] 0,07 N [7 g] – 13,8 mm [0.54 in] 2,9 mm [0.11 in] 3,60 mm [0.14 in] 52,9 mm [2.20 in] Silver (500 mm) [0.34 ±0.138] Long straight lever Sim. roller lever, SPNO/ Wire leads, bottom exit 11,7 ±1,15 ZW50F90EW3 18,65 mm [0.73 in] 6 A 0,68 N [69 g] 0,13 N [13 g] – 4,7 mm [0.18 in] 0,9 mm [0.04 in] 0,75 mm [0.03 in] Silver (500 mm) [0.46 ±0.045] radius: 3,4 mm [0.13 in] Sim. roller lever Small radius, sim. roller lever, SPDT/ Wire leads, bottom exit 10,7 ±1,2 ZW50F90HW1 18,6 mm [0.73 in] 6 A 0,67 N [68 g] 0,14 N [14 g] – 4,6 mm [0.18 in] 1,0 mm [0.04 in] 0,75 mm [0.03 in] Silver (500 mm) [0.42 ±0.047] radius: 1,3 mm [0.05 in] Small radius, sim. roller lever, Wire leads, side exit, SPDT/ 10,7 ±1,2 ZW50F91HW1 18,6 mm [0.73 in] 6 A opposite plunger 0,67 N [68 g] 0,14 N [14 g] – 4,6 mm [0.18 in] 1,0 mm [0.04 in] 0,75 mm [0.03 in] Silver [0.42 ±0.047] Sim. roller lever radius: 1,3 mm [0.05 in] (500 mm) Roller lever, SPDT/ 14,5 ±1,1 ZW10E70FD1 0.1 A Solder (long terminal) 0,59 N [60 g] 0,12 N [12 g] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in] 17,2 mm [0.68 in] Gold plate [0.57 ±0.043] Roller lever SPDT/ Wire leads, bottom exit 14,5 ±1,1 ZW10E90FW1 0.1 A 0,59 N [60 g] 0,12 N [12 g] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in] 17,2 mm [0.68 in] Gold plate (500 mm) [0.57 ±0.043] Roller lever SPDT/ Wire leads, bottom exit 14,5 ±1.1 ZW50F90FW1 6 A 0,71 N [72 g] 0,15 N [15 g] – 4,3 mm [0.17 in] 0,9 mm [0.04 in] 0,6 mm [0.02 in] Roller lever 17,2 mm [0.68 in] Silver (500 mm) [0.57 ±0.043] sensing.honeywell.com 7 ZW Series MOUNTING DIMENSIONS MOUNTING DIMENSIONS Ø 2,30 ± 0,10 2,35 [0.091 ±0.003] [0.093] 2,30 ±0,10 [0.091 ±0.003] 9,25 [0.364] 2,60 ± 0,10 6,40 [0.102 ±0.003] [0.252] 5,20 Note: unless otherwise noted, [0.205] 9,50 ± 0,15 a tolerace of ±0,4 mm applies [0.374 ±0.005] to all dimensions. 19,80 [0.780] TERMINAL TYPES TYPE 15 - SOLDER (STRAIGHT) TYPE 20 - PCB (STRAIGHT) TYPE 70 -LONG SOLDER TERMINALS TYPE 90 - CABLE-BOTTOM EXIT PT 0,80 [0.031] OP 3,20 4,10 2,40 15,40 [0.126] [0.161] [0.094] [0.606] 6,90 [0.272] 2,40 2,40 [0.094] [0.094] 7,50 7,50 7,50 7,50 7,50 7,50 [0.295] [0.295] [0.295] [0.295] [0.295] [0.295] Ø1,20 Ø 1,80 0,50 ±0,05 500 min. [0.047] [0.071] 0,50 ±0,05 0,50 ±0,05 [19,685] [0.020 ±0.002] [0.020± 0.002] [0.020 ±0.002] A DIRECTION B DIRECTION Ø1,80 [0.071] 2,80 2,80 2,80 [0.110] Ø 0,80 [0.110] [0.110] [0.032] 0,60 ±0,05 A B [0.024 ±0.002] 3,0 ±1,0 7,50 7,50 (35°) (35°) [0.295] [0.295] (35°) [0.118 ±0.039] NC NO COM (GRAY) (BLUE) (BLACK) TYPE 91 - CABLE-SIDE EXIT TYPE 92 - CABLE-SIDE EXIT [OPPOSITE PLUNGER END] [PLUNGER END] 500 min. 500 min. [19.685] [19.685] 3,0 ±1,0 3,0 ±1,0 [0.118 ±0.039] [0.118 ±0.039] 19,25 [0.758] SPDT 19,25 [0.758] SPDT NC (GRAY) COM (BLACK) 15,40 [0.606] SPST 15,40 [0.606] SPST NO (BLUE) NO (BLUE) COM (BLACK) NC (GRAY) Ø1,80 Ø 0,80 [0.071] [0.032] Ø1,80 Ø 0,80 [0.071] [0.032] ACTUATOR TYPES (ALL ACTUATORS EXCEPT TYPE A AND F ARE 4.0 WIDE) TYPE B TYPE C TYPE D TYPE A STANDARD STRAIGHT LEVER (19.4mm) LONG STRAIGHT LEVER (25.5MM) SHORT STRAIGHT LEVER (17.4MM) PIN PLUNGER PT PT 19,40 17,40 PT [0.764] [0.685] PT Ø2,15 [0.085] OP OP OP FP OP 6,00 6,00 6,00 [0.236] [0.236] [0.236] 7,50 7,50 4,85 7,50 4,85 7,50 4,85 [0.295] [0.295] [0.191] [0.295] [0.191] [0.295] [0.191] TYPE F TYPE E TYPE H TYPE J ROLLER LEVER (17.2MM, ROLL Ø4.8) SIMULATED ROLLER LEVER (18.7MM,R3.4) SMALL SIMULATED ROLLER LEVER (18.6MM,R1.3) LONGEST STRAIGHT LEVER (55.9MM) PT 5,10 PT 18,65 [0.201] PT 18,60 17,20 [0.734] [0.732] PT [0.677] 55,90 R1,30 R3,40 Ø4,80 [2.201] [0.051] [0.134] [o.189] OP OP OP OP 6,00 6,00 6,00 6,00 [0.236] [0.236] [0.236] [0.236] 7,50 4,85 7,50 4,85 7,50 4,85 7,50 4,85 [0.295] [0.191] [0.295] [0.191] [0.295] [0.191] [0.295] [0.191] ABOVE ''OP" FROM MOUNTING HOLE PT sensing.honeywell.com 8 FP OP 7,45 [0.293] "OP" FROM TERMINAL (FOR TYPE 20 TERMINAL) ADDITIONAL INFORMATION WARNING The following associated literature is available on the Honeywell web PERSONAL INJURY site at sensing.honeywell.com: DO NOT USE these products as safety or emergency stop • Product installation instructions devices or in any other application where failure of the • Product range guide product could result in personal injury. • Product nomenclature tree Failure to comply with these instructions could result in • Product application-specific information death or serious injury. – Case study: Stamp of approval, ZW Series – Application note: Sensors and switches for potential HVAC/R WARNING applications MISUSE OF DOCUMENTATION – Application note: Sensors and switches in industrial air • The information presented in this product sheet is for compressors reference only. Do not use this document as a product installation guide. – Application note: Sensors and switches in sanitary valves • Complete installation, operation, and maintenance – Application note: Sensors and switches in valves and flow information is provided in the instructions supplied with meters each product. – Application note: Sensors and switches for potential medical Failure to comply with these instructions could result in applications death or serious injury. – Application note: Sensors and switches for valve monitors and valve indicators WARRANTY/REMEDY – Application note: Watertight switches in transportation Honeywell warrants goods of its manufacture as being free of applications defective materials and faulty workmanship. Honeywell’s standard – Technical bulletin: Applying precision switches product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult – Technical bulletin: Low energy switch guide your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Find out more Honeywell will repair or replace, at its option, without charge those Honeywell serves its customers items it finds defective. The foregoing is buyer’s sole remedy through a worldwide network and is in lieu of all other warranties, expressed or implied, of sales offices, representatives including those of merchantability and fitness for a particu- and distributors. For application lar purpose. In no event shall Honeywell be liable for conse- assistance, current specifications, quential, special, or indirect damages. pricing or name of the nearest Authorized Distributor, contact While we provide application assistance personally, through our your local sales office. literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. To learn more about Honeywell’s sensing and switching products, Specifications may change without notice. The information we call +1-815-235-6847 or supply is believed to be accurate and reliable as of this printing. 1-800-537-6945, However, we assume no responsibility for its use. visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Productivity Solutions Honeywell 1985 Douglas Drive North 004989-2-EN IL50 GLO Golden Valley, MN 55422 February 2016 honeywell.com Copyright © 2016 Honeywell International Inc. All rights reserved.