IDEC CORPORATION AB6H-BK2-S

Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks 16mm A6 Switches & Pilot Devices A6 Series — Miniature Switches and Pilot Devices: 16mm Key features: • 16mm (5/8”) mounting hole • LED illumination • Compact design saves space • Momentary, Maintained, Selectors, and E-Stops • Gold-clad Silver contacts for reliable low level switching • Snap action contacts • IP40 (dustproof) or IP65 (oiltight) versions CSA Certifi ed UL Recognized File No. LR21451 File No.E55996 R IP40: Dustproof Degree of Protection IP65 Watertight/Oiltight Contact Confi guration SPDT, DPDT Maximum Voltage 250V AC/DC Thermal Current 3A Minimum Applicable Load 5V AC/DC, 1mA Contact Material Gold-clad silver Terminal Style .110” Solder/ Quick Connect Operating Temperature -25º to +55ºC (no freezing) Operating Humidity 45 to 85% RH Contact Resistance 50mΩ maximum (initial value) Insulation Resistance 100MΩ minimum (500V DC megger) Vibration Resistance 10 to 55Hz, amplitude 1.5mm p-p 2 2 Shock Resistance Damage limits: 500m/sec (approx. 50G) Operating extremes: 200m/sec (approx. 20G) Electrical Life 100,000 operations minimum (at full rated load) Maintained: 100,000 operations minimum Mechanical Life Momentary: 1,000,000 operations minimum Selector/Keylock: 250,000 operations minimum Switch Unit: 2,000V AC, 1 min. between live/dead part and terminals of different poles; 1,000V AC, 1 minute between terminals of the same pole; Dielectric Strength 1,500V AC, 1 minute between contact and lamp terminals. Illumination Unit: 2,000V AC, 1 min. between live part/ground Soldering Temperature 20W/5 seconds or 260ºC/3 seconds Operating Voltage 24V 120V 240V Resistive — 1.0A 0.5A AC (50/60Hz) Inductive — 0.7A 0.5A Resistive 1.0A 0.2A — DC Inductive 0.7A 0.1A — 5V DC ±5% 6V AC/DC (±10%) 12V AC/DC (±10%) 24V AC/DC (±10%) AC: A, R, W, Y: 8mA Rated Voltage/Current G, S: 7mA AC: 9mA AC: 9mA 8mA DC: A, R, W, Y: 6mA DC: 8mA DC: 8mA G, S: 5mA 1. AC Inductive Load, PF = 0.6 – 0.7; DC Inductive Load, L/R = 7ms. 2. LED lamp contains a built-in current limiting resistor and a protection diode. 3. LED’s don’t “burn out.” Luminance is reduced to 50% of initial intensity after being lit for 50,000 hours continuously. USA: 800-262-IDEC Canada: 888-317-IDEC 457 LED Lamp Contact Ratings Specifi cations Ratings 16mm A6 Switches & Pilot Devices AB6 Non-Illuminated Pushbuttons (Assembled) Non-Illuminated Pushbuttons jjButton Color Code Button Color Code Part Number Color Color Code Code Style Contact Momentary Maintained (Latching) Black Black B B Dustproof (IP40) Oiltight (IP65) Dustproof (IP40) Oiltight (IP65) Green Green G G Round 18mm Red Red R R SPDT AB6M-M1-j AB6M-M1P-j AB6M-A1-j AB6M-A1P-j Blue Blue S S DPDT AB6M-M2-j AB6M-M2P-j AB6M-A2-j AB6M-A2P-j White White W W Y Yellow ellow Y Y Square 18mm SPDT AB6Q-M1-j AB6Q-M1P-j AB6Q-A1-j AB6Q-A1P-j DPDT AB6Q-M2-j AB6Q-M2P-j AB6Q-A2-j AB6Q-A2P-j Rectangular 18mm x 24mm SPDT AB6H-M1-j AB6H-M1P-j AB6H-A1-j AB6H-A1P-j DPDT AB6H-M2-j AB6H-M2P-j AB6H-A2-j AB6H-A2P-j Round 23.5mm SPDT AB6M-M1P-Mj AB6M-A1P-Mj – – DPDT AB6M-M2P-Mj AB6M-A2P-Mj 1. In place of 1. In place of jj, specify Button Color Code , specify Button Color Code from the table at right. from the table at right. Square 23.5mm 2. T 2. To o order as sub-assembled, see page 459. order as sub-assembled, see page 459. 3. For accessories, see page 466. 3. For accessories, see page 466. SPDT AB6Q-M1P-Qj AB6Q-A1P-Qj 4. For dimensions, see page 468. 4. For dimensions, see page 468. – – DPDT AB6Q-M2P-Qj AB6Q-A2P-Qj Rectangular 17.5 X 23.5mm SPDT AB6Q-M1P-Hj AB6Q-A1P-Hj – – DPDT AB6Q-M2P-Hj AB6Q-A2P-Hj AB6-V Pushlock Turn Reset Part Number Shape Operation Contact Remarks Dustproof (IP40) Oiltight (IP65) 23.5mm Round Mushroom SPDT AB6M-V1-R AB6M-V1P-R 1. Button available in red only. Pushlock Turn Reset DPDT AB6M-V2-R AB6M-V2P-R 2. Replacement button: order AB6M-V-R Buzzer Buzzer Ratings Style Shape Voltage Part Number Frequency 2 khz ± 500 HZ Amplitude 80db @ 0.1m (at rated voltage) 12V DC UZ6-11 Operating Voltage 6V AC/DC or 12 - 24V AC/DC ± 10% Round (18mm) 24V DC UZ6-12 Adjustable Cycle 55 to 600 cycles per minute Current Draw DC: 7mA, AC: 20mA Life 1000 hrs. minimum Insulation Voltage 60V AC/DC Operating Temperature -20 to 55 C (no freezing), 45 to 85% rh 458 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Oversize Button Standard Button Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks 16mm A6 Switches & Pilot Devices AB6 Non-Illuminated Pushbuttons (Sub-Assembled) Operator + Button = Completed Unit Operators Part Number Style Contact Operator Round Square Rectangular Non-Illuminated Pushbuttons Momentary AB6M-M100 AB6Q-M100 AB6H-M100 SPDT Maintained AB6M-A100 AB6Q-A100 AB6H-A100 Momentary AB6M-M200 AB6Q-M200 AB6H-M200 DPDT Maintained AB6M-A200 AB6Q-A200 AB6H-A200 Oversize rectangular button uses square operator. Buttons jjButton Color Code Button Color Code Part Number Color Color Code Code Description Button Black Black B B Dustproof (IP40) Oiltight (IP65) Green Green G G Round Red Red R R AB6M-BK1-j AB6M-BK2-j Blue Blue S S White White W W Y Yellow ellow Y Y Square AB6Q-BK1-j AB6Q-BK2-j Rectangular AB6H-BK1-j AB6H-BK2-j Round Oversize – AB6M-BK2-Mj Square Oversize – AB6Q-BK2-Qj Rectangular Oversize – AB6Q-BK2-Hj 1. In place of j, specify Button Color Code from table. 2. Buttons which are rated IP65 include a waterproof rubber gasket. 3. For accessories, see page 466. USA: 800-262-IDEC Canada: 888-317-IDEC 459 16mm A6 Switches & Pilot Devices AL6 Illuminated Pushbuttons (Assembled) LED Illuminated Pushbuttons Part Numbers Description Style Contact Momentary Maintained (Latching) Dustproof (IP40) Oiltight (IP65) Dustproof (IP40) Oiltight (IP65) Round (18mm lens) SPDT AL6M-M1l-k AL6M-M1lP-k AL6M-A1l-k AL6M-A1lP-k DPDT AL6M-M2l-k AL6M-M2lP-k AL6M-A2l-k AL6M-A2lP-k Square (18mm lens) SPDT AL6Q-M1l-k AL6Q-M1lP-k AL6Q-A1l-k AL6Q-A1lP-k Standard DPDT AL6Q-M2l-k AL6Q-M2lP-k AL6Q-A2l-k AL6Q-A2lP-k Lens Rectangular (18mm x 24mm lens) SPDT AL6H-M1l-k AL6H-M1lP-k AL6H-A1l-k AL6H-A1lP-k DPDT AL6H-M2l-k AL6H-M2lP-k AL6H-A2l-k AL6H-A2lP-k Round (24mm lens) SPDT AL6M-M1lP-Mk AL6M-A1lP-Mk – – DPDT AL6M-M2lP-Mk AL6M-A2lP-Mk Square (24mm lens) SPDT AL6Q-M1lP-Qk AL6Q-A1lP-Qk – – DPDT AL6Q-M2lP-Qk AL6Q-A2lP-Qk Oversize Lens Rectangular (18mm x 24mm lens) SPDT AL6Q-M1lP-Hk AL6Q-A1lP-Hk – – DPDT AL6Q-M2lP-Hk AL6Q-A2lP-Hk 1. In place of k, specify Lens/LED Color Code from table below. 2. In place of l, specify Voltage Code from table below. 3. Lamps also available in 5V DC, 6V AC/DC or 12 V AC/DC, change “4” using voltage/lamp codes (ie AL6M-M13-k uses 12V AC/DC LED). 4. LED lamp is included in unit and contains a current-limiting resistor and a protection diode. (External resistor not required.) 5. To order as sub-assembled, see page 461. 6. For accessories, see page 466. 7. For dimensions, see page 468. 8. Light independent of switch position. kLens/LED Color Code llV Vo oltage Code ltage Code V Voltage oltage Code Code Color Code Amber A 5V DC 5V DC 1 1 Green G 6V AC/DC 6V AC/DC 2 2 Red R 12V AC/DC 12V AC/DC 3 3 Blue S 24V AC/DC 24V AC/DC 4 4 Warm White W Cool White JW Yellow Y 460 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks 16mm A6 Switches & Pilot Devices AL6 Illuminated Pushbuttons (Sub-Assembled) Operator + LED Lamp + Lens = Completed Unit Operators Part Number Style Contact Operator Round Square Rectangular Momentary AL6M-M100 AL6Q-M100 AL6H-M100 AL6 Illuminated Pushbuttons SPDT Maintained AL6M-A100 AL6Q-A100 AL6H-A100 Momentary AL6M-M200 AL6Q-M200 AL6H-M200 DPDT Maintained AL6M-A200 AL6Q-A200 AL6H-A200 Oversize rectangular button uses square operator. Lenses Unit Part Number Degree of Protection Dustproof (IP40) Oiltight (IP65) Size Standard Standard Oversize AL6M-LK1-k AL6M-LK2-k AL6M-LK2-M k Round AL6Q-LK1-k AL6Q-LK2-k AL6Q-LK2-Q k Square AL6H-LK1-k AL6H-LK2-k AL6Q-LK2-H k Rectangular 1. In place of k, specify Lens Color Code from table below. 2. Lenses which are rated IP65 include a waterproof rubber gasket. 3. For accessories, see page 466. kLens/LED Color Code LED Lamps LED Lamps Color Code Appearance Appearance Rated V Rated Voltage oltage Part Number Part Number Amber A 5V DC 5V DC LA LATD-5 TD-5 kk Green G 6V AC/DC 6V AC/DC LA LATD-6 TD-6 kk Red R 12V AC/DC 12V AC/DC LA LATD-1 TD-1 kk Blue S 24V AC/DC 24V AC/DC LA LATD-2 TD-2 kk Warm White W 1. 1. In place of In place of kk, specify LED Color Code from table at left. , specify LED Color Code from table at left. Cool White JW Yellow Y USA: 800-262-IDEC Canada: 888-317-IDEC 461 16mm A6 Switches & Pilot Devices AL6 Pilot Lights (Assembled) LED Pilot Lights Part Number Description Dustproof (IP40) Oiltight (IP65) Round (18mm Lens) AL6M-Pl-k AL6M-PlP-k Square (18mm Lens) AL6Q-Pl-k AL6Q-PlP-k Rectangular (18mm x 24mm Lens) AL6H-Pl-k AL6H-PlP-k 1. In place of k, specify Lens Color Code from table below. 2. In place of l, specify Voltage Code from table below. 3. LEDs also available in 5V DC, 6V AC/DC or 12 V AC/DC, change “4” using voltage codes (ie AL6M-P3-k uses 12V AC/DC LED). 4. LED is included and contains built-in current limiting resistor and reverse polarity protection diode. (no external resistor required) 5. To order sub-assembled, see page 463. 6. For accessories, see page 466. 7. For dimensions, see page 468. 8. For one piece pilot lights and/or dome lens pilot lights, see AP series miniature pilot lights. kLens/LED Color Code llV Vo oltage Code ltage Code V Voltage oltage Code Code Color Code Amber A 5V DC 5V DC 1 1 Green G 6V AC/DC 6V AC/DC 2 2 Red R 12V AC/DC 12V AC/DC 3 3 Blue S 24V AC/DC 24V AC/DC 4 4 Warm White W Cool White JW Yellow Y 462 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks 16mm A6 Switches & Pilot Devices AL6 Pilot Lights (Sub-Assembled) Operator + LED Lamp + Lens = Completed Unit Operators Part Number Style Round Square Rectangular AL6 Pilot Lights AL6M-P00 AL6Q-P00 AL6H-P00 Lenses Part Number Degree of Protection Dustproof IP40 Oiltight IP65 AL6M-LK1-k AL6M-LK3-k Round AL6Q-LK1-k AL6Q-LK3-k Square AL6H-LK1-k AL6H-LK3-k Rectangular 1. In place of k, specify Lens Color Code from table below. 2. Lenses which are rated IP65 include a waterproof rubber gasket. 3. For accessories, see page 466. kLens/LED Color Code LED Lamps LED Lamps Color Code Appearance Appearance Rated V Rated Voltage oltage Part Number Part Number Amber A 5V DC 5V DC LA LATD-5 TD-5 kk Green G 6V AC/DC 6V AC/DC LA LATD-6 TD-6 kk Red R 12V AC/DC 12V AC/DC LA LATD-1 TD-1 kk Blue S 24V AC/DC 24V AC/DC LA LATD-2 TD-2 kk Warm White W 1. 1. In place of In place of kk, specify LED Color Code from table at left. , specify LED Color Code from table at left. Cool White JW Yellow Y USA: 800-262-IDEC Canada: 888-317-IDEC 463 16mm A6 Switches & Pilot Devices AS6 Selector and Keylock Switches Contact Operations Contact Operations AS6 Selector Switches and Keylock Switches (2 & 3 Position) (for all selectors) (for all selectors) Style Function Knob Key Operator Position Operator Position Contents Contents L R & Contact Operation & Contact Operation MaintainedAS6M-2Y2P AS6M-2KT2Pj Round Selector Left Left Right Right Contact Contact Contact Contact Spring Return NO NO NC NC NO NO NC NC L R AS6M-21Y2P AS6M-21KT2PB Right Left Left C C C C C L Maintained AS6M-3Y2P AS6M-3KT2Pj R 2-pos. (DPDT) 2-pos. (DPDT) Left Left Right Right Contact Contact Contact Contact NO NO NC NC NO NO NC NC Round Keylock C Spring Return Right Right L AS6M-31Y2P AS6M-31KT2Pj R Right gCenter C C C C C Spring Return L Left Left Right Right R AS6M-32Y2P AS6M-32KT2Pj Contact Contact Contact Contact Left gCenter NO NO NC NC NO NO NC NC Left Left C 2-Way L AS6M-33Y2P AS6M-33KT2PD R C C C C ReturngCenter Left Left Right Right L Contact Contact Contact Contact R MaintainedAS6Q-2Y2P AS6Q-2KT2Pj NO NO NC NC NO NO NC NC Square Selector 3-pos. (DPDT) 3-pos. (DPDT) Center Center Spring Return to L R C C C C AS6Q-21Y2P AS6Q-21KT2PB Right Left Left Right Right Contact Contact Contact Contact C NO NO NC NC NO NO NC NC L Maintained AS6Q-3Y2P AS6Q-3KT2Pj R Right Right C C C C C Square Keylock Spring Return L AS6Q-31Y2P AS6Q-31KT2Pj R RightgCenter jjKey Retention Codes Key Retention Codes C Spring Return L R AS6Q-32Y2P AS6Q-32KT2Pj Code Code Description Description Left gCenter Key not retained in any position Key not retained in any position C A A 2-Way (removable in all positions) (removable in all positions) L AS6Q-33Y2P AS6Q-33KT2PD R ReturngCenter B B Key retained in right position only Key retained in right position only L R MaintainedAS6H-2Y2P AS6H-2KT2Pj C C Key retained in left position only Key retained in left position only Rectangular Selector Key retained in left and right Key retained in left and right D D Spring Return L R (3 position only) (3 position only) AS6H-21Y2P AS6H-21KT2PB Right Key retained in center only Key retained in center only E E C (3 position only) (3 position only) L Maintained AS6H-3Y2P AS6H-3KT2Pj R Key retained right and center Key retained right and center G G C (3 position only) (3 position only) Rectangular Keylock Spring Return L AS6H-31Y2P AS6H-31KT2Pj R Right gCenter Key retained left and center Key retained left and center H H (3 position only) (3 position only) C Spring Return L R AS6H-32Y2P AS6H-32KT2Pj Key cannot be removed in a spring return Key cannot be removed in a spring return LeftgCenter position. position. C 2-Way L AS6H-33Y2P AS6H-33KT2PD R ReturngCenter 1. All models are IP65 and DPDT. 2. In place of j, specify Key Retention Code. See table on right. 3. Available as assembled units only. 4. For accessories, see page 466. 5. For dimensions, see page 468. 464 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights 3-Position 45º 2-Position 90º 3-Position 45º 2-Position 90º 3-Position 45º 2-Position 90º Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks 16mm A6 Switches & Pilot Devices Switch Engraving Order Form – A6 Series Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved. To insure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: Telephone: Name: Fax: Address: Email: PO: Part Number to be Engraved: Please check one of the boxes below to indicate your choice of engraving options: Rectangular Square Round Switch Switch Switch # of Letter Max. Characters Letter Max. Characters # of Letter Max. Characters # of Lines Lines Height Per Line Height Per Line Lines Height Per Line 1 5/32 6 1 5/32 5 5/32 3 1 5/32 6 5/32 5 1/8 3 2 2 1/8 6 1/8 6 2 5/32 Custom* 3 1/8 6 3 1/8 6 3 1/8 Custom* 4 N/A 4 N/A 4 3/32 Custom* *Engraving is possible, but character size will be smaller than standard sizes. 1. Engraving is done on the button itself for non-Illuminated pushbuttons and on marking plate for illuminated pushbuttons and pilot lights. 2. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters. Enter text to be engraved: Sample Letter Sizes 1/8 Letters: Line 1: 5/32 Letters: Line 2: Line 3: Line 4: For IDEC Internal Use Only: Work Order #: USA: 800-262-IDEC Canada: 888-317-IDEC 465 16mm A6 Switches & Pilot Devices Accessories Appearance Description Used With Part Number Ø 5/8” (16mm) units MT-001 Locking Ring Made of metal. Used for tightening plastic locking ring during Ø 31/64” (12mm) AP2M units MT-002 Wrench installation. Tightening torque should not exceed 3kgf-cm Ø 13/32” (10mm) AP1M units MT-003 Made of metal. Used for removing lens or button from the Lens Removal Tool All pushbuttons and pilot lights MT-101 housing Made of rubber. Used for removing and replacing LED lamps All illuminated pushbuttons and pilot Lamp Holder Tool OR-77 in illuminated units lights Round/Square AL-K6 Prevents inadvertent switch operation. IP40 dust-tight. 90 degrees opening maintained Rectangular AL-KH6 Switch Guard Round/Square AL-K6SP Prevents inadvertent switch operation. IP65 oiltight 180 degrees opening, spring return Rectangular AL-KH6SP Terminal Cover Made of translucent nylon. Fits over and shields the terminals All 5/8” (16mm) units AL-V6 All round units AL-D6 All square units AL-DQ6 Fits over the lens or button to provide extra protection from Dust Cover dust (not applicable for oversize lenses or buttons). All rectangular units AL-DH6 Plug-on terminal adaptor with solder terminals AL-C6 Adaptor Socket All 5/8” (16mm) units Plug-on terminal adaptor with PCB terminals AL-C6V Fills unused panel cutouts. Made of nitrile rubber. Push-in Rubber AL-B6 installation from front of panel. IP65 (oiltight). Fills unused panel cutouts. Made of aluminum. Screw-on Aluminum AL-BM6 locking ring from inside of panel. IP65 (oiltight). Mounting Hole Plug Round Mounting Hole Plug LA9Z-BS6 Plastic (Applicable for fl ush mount Square Mounting Hole Plug LA9Z-BS7 switches only) Rectangular Mounting Hole Plug LA9Z-BS8 5V DC LATD-5 k 6V AC/DC LATD-6 k Replacement LED with built in current limiting resistor (with all LED Lamps illuminated assemblies). 12V AC/DC LATD-1 k 24V AC/DC LATD-2 k Replacement Fastens operators to panel (included with All switches & pilot lights HA9Z-LN Locking Ring all operators). Prevents rotation of switches in panel Anti-Rotation Ring All switches & pilot lights AL6-LP (included with all operators). Round standard AL6M-W Square standard AL6Q-W Replacement Engraving plates to allow legends underneath translucent Rectangular standard AL6H-W Engraving Inserts lenses (included with all lenses). Round oversize AL6M-MW Square/rectangular oversize AL6Q-QW Pair of keys (#132). Replacement Keys All key selectors AS6-SK All key switches use same standard key. 1. In place of k specify color code. A=Amber, G=Green, Y=Yellow, R=Red, S=Blue, W=Warm White, JW=Cool White. 2. LEDs include built-in current limiting resistor and reverse polarity protection diode. 466 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks 16mm A6 Switches & Pilot Devices Appearance Description Used With Part Number Pushbuttons, pilot lights, illuminated pushbutton, selector switches, key ø24mm round, metal (aluminum color), panel cut-out ø20.2mm LA9Z-SM61 selector switches and illuminated selec- tor switches. ø24mm round, plastic (black), square panel cut-out ø20.2mm LA9Z-S61B A6 Switch Flush Bezel + 24mm square, plastic (black), panel cut-out 20.2 x 20.2mm LA9Z-S71B Flush Bezel 24 x 30mm rectangular, plastic (black), rectangular LA9Z-S81B panel cut-out ø20.2 x 26.2mm = Switch Guard w/ Flush Bezel Rectangular, plastic (black) LA9Z-KS8 (spring return) Flush Switch Schematics — A Series: 5/8” (16mm) Terminal Arrangement (Top View) Non-illuminated Pushbuttons and Illuminated Pushbuttons Selector Switches Pilot Lights (TOP) (TOP) (TOP) (TOP) (TOP) NC1 NC1 NC2 NC1 NC2 NC1 NO1 NO1 NO2 NO1 NO2 NO1 Lamp Lamp C1 Terminal (+) Terminal (–) C1 C2 Lamp Lamp C1 C2 C1 Lamp Lamp Terminal (+) Terminal (–) Terminal (+) Terminal (–) SPDT Contact DPDT Contact SPDT Contact DPDT Contact (Single-pole/Double Throw) (Double-pole/Double Throw) (Single-pole/Double (Double-pole/Double Throw) Throw) IDEC’s Superbright LED Internal Circuits LATD-1,-2,-6 (GS) LATD-5 (ARWY) LED Chip Protective Diode Zener Diode LATD-1,-2,-6 (ARWY) LATD-5 (GS) USA: 800-262-IDEC Canada: 888-317-IDEC 467 TOP 16mm A6 Switches & Pilot Devices Dimensions (mm) Pushbuttons, Ø 5/8” (16mm) Rubber Gasket Panel Thickness 0.5 to 6 Terminal Width 2.8×0.5t Anti-rotation Ring ş18 Round 2.5 3 Rectangular Square Locking Ring ( ) TOP (TOP) ( ) TOP 1 0.6 5.7 24 18 822 9 9 Oversize Lens Rubber Gasket Anti-rotation Ring Panel Thickness 0.5 to 6 Teminal Width 2.8×0.5t Rectangular Square Round Locking Ring ( ) ( ) (TOP) 2.5 3 TOP TOP 6 6 1 0.6 9 23.5 0.6 9 0.6 8 22 15.5 15.5 12.5 Selector Switches, Ø 5/8” (16mm) Rubber Gasket Panel Thickness 0.5 to 6 Terminal Width 2.8×0.5t Anti-rotation Ring Rectangular Square Round 2.5 3 (TOP) (TOP) (TOP) Locking Ring 8 1 8 22 15.5 24 c18 Key Selector Switches, Ø 5/8” (16mm) Right Contact Left Contact Rubber Gasket Anti-rotation Ring Rectangular Square Round Panel Thickness 0.5 to 6 Terminal Width 2.8×0.5t ( ) ( ) ( ) TOP TOP TOP Locking Ring 2.5 3 N C N O C 1 18 822 26 24 ø18 468 www.idec.com ø18 Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights 5 5 5 5 5 5 5 5 3 2.5 17.5 18 c 23.5 18 18 ø23.5 Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks R22 R22 16mm A6 Switches & Pilot Devices Switch Guard, Ø 5/8” (16mm) Panel Thickness 34 0.5 to 5 Panel Thickness 32 0.5 to 5 18 24 Rubber Gasket Rubber Gasket 14 28 14 28 ( ( 90°/110° opening type) 180° opening type) 19 minimum 25 minimum Panel Thickness 34 0.5 to 5 Waterproof Gasket 18 24 for Switch Guard Rubber Gasket 0.4 14 28 19 min. 25 min. Flush Bezel Flush Bezel with Switch Mounting Flush Panel Thickness 0.5 to 5 Bracket Gasket Bezel Plastic Metal Round 1 0.9 0.8 8 29 2 9.8 8.5 2 Square Selector Switches Illuminated & 8.5 2 Non-illuminated Key Lever Rectangular 2 2 2 24 8.5 18.1 17 30 9.3 2 Flush Bezel Mounting Hole Layout Round Square Rectangular +0.2 +0.2 20.2 26.2 – 0.1 – 0.1 30 min.∗ 24 min.∗ 24 min.∗ USA: 800-262-IDEC Canada: 888-317-IDEC 469 ş18 ş18 +0.2 ş20.2 – 0.1 ş24 ş24 23.5 23.5 24 min.∗ 10.5 13 10.5 13 22.6 23 26.5 minimum 45.5 min. (45.5 minimum for 180° opening type) 27.4 21.4 21.4 ş21.4 23.5 23.5 10.5 13 10.5 13 24 min.∗ 26 20 20 ş 20 24 24 18 18 45.5 min. 26.5 minimum (45.5 minimum for 180° opening type) 14.8 33 +0.2 20.2 -0.1 33 24 min.∗ 1 OD 16mm A6 Switches & Pilot Devices Terminal Sockets +0.3 Terminal 1.5×0.3t 8-1.6 0 Holes TOP 33.5 2.5 3 33.5 2.5 3 ( ) TOP NC1 NC2 NO1 NO2 C1 C2 16.2 7.5 66 16.2 3.8 66 Lamp Lamp Terminal (+) Terminal ( ) – PC Board Solder Terminal Type PC Board Terminal Type Terminal Arrangement Mounting Hole Layout ( ) ( ) AL-C6 AL-C6V (Bottom View) (Bottom View) Dust Covers Panel Cut-Outs For Units w/Dust Cover AL-D6, Round AL-DQ6, Square AL-DH6, Rectangular Round/Square Rectangular +0.2 +0.2 c 30 ø24 24 ø16.2 0 ø16.2 0 30 min. 24 min. Waterproof Gasket Waterproof Gasket Waterproof Gasket for Dust Cover for Dust Cover for Dust Cover Marking Plates Pushbuttons with Standard Size Lens Pushbuttons with Oversize Lens Style Round—AL6M-W Square—AL6Q-W Rectangular—AL6H-W Style Round—AL6M-MW Square/Rectangular—AL6Q-QW 2 OD şa şOD Engraving Marking Engraving ❏OD ❏a Area Area Area Dimensions şa ca 2 Dimensions a Marking Marking Area Area Ø 5/8” (16mm) Outside (OD) Ø 0.491” (12.6mm) 0.491” (12.6mm) 1 2 (OD x OD ) 13.8 x Marking Area Outside (OD) (13.8mm) (13.8mm) Ø 0.429” (11mm) 0.429” (11mm) 19.8mm (a) Marking Area 1 2 (12mm) (12mm) (a xa ) 12 x 18mm (a) Engraving must be made on the engraving area within 0.02” (0.5mm) deep. Replacing & and Marking Plate Removal Installation Remove the lens holder assembly (lens, marking plate and holder) from the opera- For illuminated pushbuttons: tor by holding the color lens recesses with the lens removal tool (Part No.MT-101) 1. Insert marking plate inside lens in correct direction and pulling out. Remove marking plate by pushing the color lens from the rear to 2. Press color lens on to lens holder to engage latches. disengage the latches. Marking plate must be engraved on the side as shown in 3. Insert lens holder into housing in correct direction. Do not loosen spring on illuminated pushbutton units (except on pilot light units). The the fi gure on the right. marking plate must be engraved on the front side as shown above. Ø 5/8” (16mm) Fitting Grooves Grooves Engraving Surface Color Lens Marking Plate Lens Holder 470 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights 0.3 13 7.5 0.8 şOD 2.4 0.3 13 7.5 0.8 şOD 5 5 1 0.8 a 0.3 13 7.5 24 24 min. 5 5 24 min.