IDEC CORPORATION AL6M-P3-R
Specifications
Manufacturer
IDEC Corporation
Manufacturers Part #
AL6M-P3-R
Lead Time
1 Week Lead Time
Industry Aliases
AL6M-P3-R
Sub-Categories
Miscellaneous Tools and Supplies
Factory Pack Quantity
1
Datasheet
Extracted Text
Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - A6 Series Switches & Pilot Devices A6 Series — Miniature Switches and Pilot Devices: 16mm Key features: • 16mm (5/8”) mounting hole • LED illumination • Compact design saves space • Momentary, Maintained, Selectors, and E-Stops • Gold-clad Silver contacts for reliable low level switching • Snap action contacts • IP40 (dustproof) or IP65 (oiltight) versions CSA Certified UL Recognized File No. LR21451 File No.E55996 IP40: Dustproof Degree of Protection IP65 Watertight/Oiltight Contact Configuration SPDT, DPDT Maximum Voltage 250V AC/DC Thermal Current 3A Minimum Applicable Load 5V AC/DC, 1mA Contact Material Gold-clad silver Terminal Style .110” Solder/ Quick Connect Operating Temperature -25º to +55ºC (no freezing) Operating Humidity 45 to 85% RH Contact Resistance 50mΩ maximum (initial value) Insulation Resistance 100MΩ minimum (500V DC megger) Vibration Resistance 10 to 55Hz, amplitude 1.5mm p-p 2 2 Shock Resistance Damage limits: 500m/sec (approx. 50G) Operating extremes: 200m/sec (approx. 20G) Electrical Life 100,000 operations minimum (at full rated load) Maintained: 100,000 operations minimum Mechanical Life Momentary: 1,000,000 operations minimum Selector/Keylock: 250,000 operations minimum Switch Unit: 2,000V AC, 1 min. between live/dead part and terminals of different poles; 1,000V AC, 1 minute between terminals of the same pole; Dielectric Strength 1,500V AC, 1 minute between contact and lamp terminals. Illumination Unit: 2,000V AC, 1 min. between live part/ground Soldering Temperature 20W/5 seconds or 260ºC/3 seconds Operating Voltage 24V 120V 240V Resistive — 1.0A 0.5A AC (50/60Hz) Inductive — 0.7A 0.5A Resistive 1.0A 0.2A — DC Inductive 0.7A 0.1A — 5V DC ±5% 6V AC/DC (±10%) 12V AC/DC (±10%) 24V AC/DC (±10%) AC: A, R, W, Y: 8mA Rated Voltage/Current G, S: 7mA AC: 9mA AC: 9mA 8mA DC: A, R, W, Y: 6mA DC: 8mA DC: 8mA G, S: 5mA 1. AC Inductive Load, PF = 0.6 – 0.7; DC Inductive Load, L/R = 7ms. 2. LED lamp contains a built-in current limiting resistor and a protection diode. 3. LED’s don’t “burn out.” Luminance is reduced to 50% of initial intensity after being lit for 50,000 hours continuously. 1705151131 800-262-IDEC (4332) • USA & Canada 541 LED Lamp Contact Ratings Specifications Ratings ø16mm - A6 Series Switches & Pilot Devices AB6 Non-Illuminated Pushbuttons (Assembled) Non-Illuminated Pushbuttons jButton Color Code Part Number Color Code Style Contact Momentary Maintained (Latching) Black B Dustproof (IP40) Oiltight (IP65) Dustproof (IP40) Oiltight (IP65) Green G Round 18mm Red R SPDT AB6M-M1-➀ AB6M-M1P-➀ AB6M-A1-➀ AB6M-A1P-➀ Blue S DPDT AB6M-M2-➀ AB6M-M2P-➀ AB6M-A2-➀ AB6M-A2P-➀ White W Yellow Y Square 18mm SPDT AB6Q-M1-➀ AB6Q-M1P-➀ AB6Q-A1-➀ AB6Q-A1P-➀ DPDT AB6Q-M2-➀ AB6Q-M2P-➀ AB6Q-A2-➀ AB6Q-A2P-➀ Rectangular 18mm x 24mm SPDT AB6H-M1-➀ AB6H-M1P-➀ AB6H-A1-j AB6H-A1P-➀ DPDT AB6H-M2-➀ AB6H-M2P-➀ AB6H-A2-j AB6H-A2P-➀ Round 23.5mm SPDT AB6M-M1P-M➁ AB6M-A1P-M➀ – – DPDT AB6M-M2P-M➁ AB6M-A2P-M➀ 1. In place of ➀ specify Button Color Code from the table at right. Square 23.5mm 2. To order as sub-assembled, see page 459. 3. For accessories, see page 466. SPDT AB6Q-M1P-Q➀ AB6Q-A1P-Q➀ 4. For dimensions, see page 468. – – DPDT AB6Q-M2P-Q➀ AB6Q-A2P-Q➀ Rectangular 17.5 X 23.5mm SPDT AB6Q-M1P-H➀ AB6Q-A1P-H➀ – – DPDT AB6Q-M2P-H➀ AB6Q-A2P-H➀ 1705151131 www.IDEC.com 542 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Oversize Button Standard Button Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - A6 Series Switches & Pilot Devices AB6 Non-Illuminated Pushbuttons (Sub-Assembled) Operator + Button = Completed Unit Operators Part Number Style Contact Operator Round Square Rectangular Non-Illuminated Pushbuttons Momentary AB6M-M100 AB6Q-M100 AB6H-M100 SPDT Maintained AB6M-A100 AB6Q-A100 AB6H-A100 Momentary AB6M-M200 AB6Q-M200 AB6H-M200 DPDT Maintained AB6M-A200 AB6Q-A200 AB6H-A200 Oversize rectangular button uses square operator. Buttons jButton Color Code Part Number Color Code Description Button Black B Dustproof (IP40) Oiltight (IP65) Green G Round Red R AB6M-BK1-j AB6M-BK2-j Blue S White W Yellow Y Square AB6Q-BK1-j AB6Q-BK2-j Rectangular AB6H-BK1-j AB6H-BK2-j Round Oversize – AB6M-BK2-Mj Square Oversize – AB6Q-BK2-Qj Rectangular Oversize – AB6Q-BK2-Hj 1. In place of j, specify Button Color Code from table. 2. Buttons which are rated IP65 include a waterproof rubber gasket. 3. For accessories, see page 466. 1705151131 800-262-IDEC (4332) • USA & Canada 543 ø16mm - A6 Series Switches & Pilot Devices AL6 Illuminated Pushbuttons (Assembled) LED Illuminated Pushbuttons Part Numbers Description Style Contact Momentary Maintained (Latching) Dustproof (IP40) Oiltight (IP65) Dustproof (IP40) Oiltight (IP65) Round (18mm lens) SPDT AL6M-M1➂-➁ AL6M-M1➂P-➁ AL6M-A1➂-➁ AL6M-A1➂P-➁ DPDT AL6M-M2➂-➁ AL6M-M2➂P-➁ AL6M-A2➂-➁ AL6M-A2➂P-➁ Square (18mm lens) SPDT AL6Q-M1➂-➁ AL6Q-M1➂P-➁ AL6Q-A1➂-➁ AL6Q-A1➂P-➁ Standard DPDT AL6Q-M2➂-➁ AL6Q-M2➂P-➁ AL6Q-A2➂-➁ AL6Q-A2➂P-➁ Lens Rectangular (18mm x 24mm lens) SPDT AL6H-M1l-➁ AL6H-M1lP-➁ AL6H-A1l-➁ AL6H-A1lP-➁ DPDT AL6H-M2l-➁ AL6H-M2lP-➁ AL6H-A2l-➁ AL6H-A2lP-➁ Round (24mm lens) SPDT AL6M-M1➂P-M➁ AL6M-A1➂P-M➁ – – DPDT AL6M-M2➂P-M➁ AL6M-A2➂P-M➁ Square (24mm lens) SPDT AL6Q-M1➂P-Q➁ AL6Q-A1➂P-Q➁ – – DPDT AL6Q-M2➂P-Q➁ AL6Q-A2➂P-Q➁ Oversize Lens Rectangular (18mm x 24mm lens) SPDT AL6Q-M1➂P-H➁ AL6Q-A1➂P-H➁ – – DPDT AL6Q-M2➂P-H➁ AL6Q-A2➂P-H➁ 1. In place of ➁, specify Lens/LED Color Code from table below. 2. In place of ➂, specify Voltage Code from table below. 3. Lamps also available in 5V DC, 6V AC/DC or 12 V AC/DC, change “4” using voltage/lamp codes (ie AL6M-M13-k uses 12V AC/DC LED). 4. LED lamp is included in unit and contains a current-limiting resistor and a protection diode. (External resistor not required.) 5. To order as sub-assembled, see page. 6. For accessories, see page. 7. For dimensions, see page. 8. Light independent of switch position. kLens/LED Color Code lVoltage Code Color Code Voltage Code Amber A 5V DC 1 Green G 6V AC/DC 2 Red R 12V AC/DC 3 Blue S 24V AC/DC 4 Warm White W Cool White JW Yellow Y 1705151131 www.IDEC.com 544 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - A6 Series Switches & Pilot Devices AL6 Illuminated Pushbuttons (Sub-Assembled) Operator + LED Lamp + Lens = Completed Unit Operators Part Number Style Contact Operator Round Square Rectangular Momentary AL6M-M100 AL6Q-M100 AL6H-M100 AL6 Illuminated Pushbuttons SPDT Maintained AL6M-A100 AL6Q-A100 AL6H-A100 Momentary AL6M-M200 AL6Q-M200 AL6H-M200 DPDT Maintained AL6M-A200 AL6Q-A200 AL6H-A200 Oversize rectangular button uses square operator. Lenses Unit Part Number Degree of Protection Dustproof (IP40) Oiltight (IP65) Size Standard Standard Oversize AL6M-LK1-k AL6M-LK2-k AL6M-LK2-M k Round AL6Q-LK1-k AL6Q-LK2-k AL6Q-LK2-Q k Square AL6H-LK1-k AL6H-LK2-k AL6Q-LK2-H k Rectangular 1. In place of k, specify Lens Color Code from table below. 2. Lenses which are rated IP65 include a waterproof rubber gasket. 3. For accessories, see page. kLens/LED Color Code LED Lamps Color Code Appearance Rated Voltage Part Number Amber A 5V DC LATD-5 k Green G 6V AC/DC LATD-6 k Red R 12V AC/DC LATD-1 k Blue S 24V AC/DC LATD-2 k Warm White W 1. In place of k, specify LED Color Code from table at left. Cool White JW Yellow Y 1705151131 800-262-IDEC (4332) • USA & Canada 545 ø16mm - A6 Series Switches & Pilot Devices AL6 Pilot Lights (Assembled) LED Pilot Lights Part Number Description Dustproof (IP40) Oiltight (IP65) Round (18mm Lens) AL6M-Pl-k AL6M-PlP-k Square (18mm Lens) AL6Q-Pl-k AL6Q-PlP-k Rectangular (18mm x 24mm Lens) AL6H-Pl-k AL6H-PlP-k 1. In place of k, specify Lens Color Code from table below. 2. In place of l, specify Voltage Code from table below. 3. LEDs also available in 5V DC, 6V AC/DC or 12 V AC/DC, change “4” using voltage codes (ie AL6M-P3-k uses 12V AC/DC LED). 4. LED is included and contains built-in current limiting resistor and reverse polarity protection diode. (no external resistor required) 5. To order sub-assembled, see page. 6. For accessories, see page. 7. For dimensions, see page. 8. For one piece pilot lights and/or dome lens pilot lights, see AP series miniature pilot lights. kLens/LED Color Code lVoltage Code Color Code Voltage Code 5V DC 1 Amber A Green G 6V AC/DC 2 Red R 12V AC/DC 3 Blue S 24V AC/DC 4 Warm White W Cool White JW Yellow Y 1705151131 www.IDEC.com 546 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - A6 Series Switches & Pilot Devices AL6 Pilot Lights (Sub-Assembled) Operator + LED Lamp + Lens = Completed Unit Operators Part Number Style Round Square Rectangular AL6 Pilot Lights AL6M-P00 AL6Q-P00 AL6H-P00 Lenses Part Number Degree of Protection Dustproof IP40 Oiltight IP65 AL6M-LK1-k AL6M-LK3-k Round AL6Q-LK1-k AL6Q-LK3-k Square AL6H-LK1-k AL6H-LK3-k Rectangular 1. In place of k, specify Lens Color Code from table below. 2. Lenses which are rated IP65 include a waterproof rubber gasket. 3. For accessories, see page. kLens/LED Color Code LED Lamps Color Code Appearance Rated Voltage Part Number Amber A 5V DC LATD-5 k Green G 6V AC/DC LATD-6 k Red R 12V AC/DC LATD-1 k Blue S 24V AC/DC LATD-2 k Warm White W 1. In place of k, specify LED Color Code from table at left. Cool White JW Yellow Y 1705151131 800-262-IDEC (4332) • USA & Canada 547 ø16mm - A6 Series Switches & Pilot Devices AS6 Selector and Keylock Switches Contact Operations AS6 Selector Switches and Keylock Switches (2 & 3 Position) (for all selectors) Style Function Knob Key Operator Position Contents L R Maintained AS6M-2Y2P AS6M-2KT2Pj & Contact Operation Round Selector Left Right Contact Contact Spring Return L NO NC NO NC R AS6M-21Y2P AS6M-21KT2PB Right Left C C C L Maintained AS6M-3Y2P AS6M-3KT2Pj R 2-pos. (DPDT) Left Right Contact Contact NO NC NO NC Round Keylock C Spring Return Right L AS6M-31Y2P R AS6M-31KT2Pj Right gCenter C C C Spring Return L Left Right AS6M-32Y2P R AS6M-32KT2Pj Contact Contact Left gCenter NO NC NO NC Left C 2-Way L AS6M-33Y2P AS6M-33KT2PD R ReturngCenter C C Left Right L Contact Contact R Maintained AS6Q-2Y2P AS6Q-2KT2Pj NO NC NO NC Square Selector 3-pos. (DPDT) Center Spring Return to L R AS6Q-21Y2P AS6Q-21KT2PB C C Right Left Right Contact Contact C NO NC NO NC L Maintained AS6Q-3Y2P R AS6Q-3KT2Pj Right C C C Spring Return Square Keylock L AS6Q-31Y2P AS6Q-31KT2Pj R RightgCenter Key Retention Codes C Spring Return L AS6Q-32Y2P AS6Q-32KT2Pj R Code Description Left gCenter Key not retained in any position C A 2-Way (removable in all positions) L R AS6Q-33Y2P AS6Q-33KT2PD ReturngCenter B Key retained in right position only L R Maintained AS6H-2Y2P AS6H-2KT2Pj C Key retained in left position only Rectangular Selector Key retained in left and right D Spring Return L (3 position only) R AS6H-21Y2P AS6H-21KT2PB Right Key retained in center only E C (3 position only) L Maintained AS6H-3Y2P AS6H-3KT2Pj R Key retained right and center G C (3 position only) Spring Return Rectangular Keylock L AS6H-31Y2P AS6H-31KT2Pj R Right gCenter Key retained left and center H (3 position only) C Spring Return L R AS6H-32Y2P AS6H-32KT2Pj Key cannot be removed in a spring return LeftgCenter position. C 2-Way L AS6H-33Y2P AS6H-33KT2PD R ReturngCenter 1. All models are IP65 and DPDT. 2. In place of j, specify Key Retention Code. See table on right. 3. Available as assembled units only. 4. For accessories, see page 466. 5. For dimensions, see page 468. 1705151131 www.IDEC.com 548 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices 3-Position 45º 2-Position 90º 3-Position 45º 2-Position 90º 3-Position 45º 2-Position 90º Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - A6 Series Switches & Pilot Devices Switch Engraving Order Form – A6 Series Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved. To insure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: Telephone: Name: Fax: Address: Email: PO: Part Number to be Engraved: Please check one of the boxes below to indicate your choice of engraving options: Rectangular Square Round Switch Switch Switch # of Letter Max. Characters Letter Max. Characters # of Letter Max. Characters # of Lines Lines Height Per Line Height Per Line Lines Height Per Line 1 5/32 6 1 5/32 5 5/32 3 1 5/32 6 5/32 5 1/8 3 2 2 1/8 6 1/8 6 2 5/32 Custom* 3 1/8 6 3 1/8 6 3 1/8 Custom* 4 N/A 4 N/A 4 3/32 Custom* *Engraving is possible, but character size will be smaller than standard sizes. 1. Engraving is done on the button itself for non-Illuminated pushbuttons and on marking plate for illuminated pushbuttons and pilot lights. 2. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters. Enter text to be engraved Sample Letter Sizes : 1/8 Letters: Line 1: 5/32 Letters: Line 2: Line 3: Line 4: For IDEC Internal Use Only: Work Order #: 1705151131 800-262-IDEC (4332) • USA & Canada 549 ø16mm - A6 Series Switches & Pilot Devices Accessories Appearance Description Used With Part Number Ø 5/8” (16mm) units MT-001 Ø 31/64” (12mm) AP2M units MT-002 Locking Ring Made of metal. Used for tightening plastic locking ring during Wrench installation. Tightening torque should not exceed 3kgf-cm Ø 13/32” (10mm) AP1M units MT-003 Lens Removal Tool Made of metal. Used for removing lens or button from the housing All pushbuttons and pilot lights MT-101 Made of rubber. Used for removing and replacing LED lamps in All illuminated pushbuttons and pilot Lamp Holder Tool OR-77 illuminated units lights Round/Square AL-K6 Prevents inadvertent switch operation. IP40 dust-tight. 90 degrees opening maintained Rectangular AL-KH6 Switch Guard Round/Square AL-K6SP Prevents inadvertent switch operation. IP65 oiltight 180 degrees opening, spring return Rectangular AL-KH6SP Terminal Cover Made of translucent nylon. Fits over and shields the terminals All 5/8” (16mm) units AL-V6 All round units AL-D6 All square units AL-DQ6 Fits over the lens or button to provide extra protection from dust Dust Cover (not applicable for oversize lenses or buttons). All rectangular units AL-DH6 Plug-on terminal adaptor with solder terminals AL-C6 Adaptor Socket All 5/8” (16mm) units Plug-on terminal adaptor with PCB terminals AL-C6V Fills unused panel cutouts. Made of nitrile rubber. Push-in Rubber AL-B6 installation from front of panel. IP65 (oiltight). Fills unused panel cutouts. Made of aluminum. Screw-on locking Aluminum AL-BM6 ring from inside of panel. IP65 (oiltight). Mounting Hole Plug Round Mounting Hole Plug LA9Z-BS6 Plastic (Applicable for flush mount Square Mounting Hole Plug LA9Z-BS7 switches only) Rectangular Mounting Hole Plug LA9Z-BS8 5V DC LATD-5 k 6V AC/DC LATD-6 k Replacement LED with built in current limiting resistor (with all illuminated 12V AC/DC LATD-1 k LED Lamps assemblies). 24V AC/DC LATD-2 k Replacement Fastens operators to panel (included with all operators). All switches & pilot lights HA9Z-LN Locking Ring Prevents rotation of switches in panel Anti-Rotation Ring All switches & pilot lights AL6-LP (included with all operators). Round standard AL6M-W Square standard AL6Q-W Replacement Engraving plates to allow legends underneath translucent lenses Rectangular standard AL6H-W Engraving Inserts (included with all lenses). Round oversize AL6M-MW Square/rectangular oversize AL6Q-QW Pair of keys (#132). Replacement Keys All key selectors AS6-SK All key switches use same standard key. 1. In place of k specify color code. A=Amber, G=Green, Y=Yellow, R=Red, S=Blue, W=Warm White, JW=Cool White. 2. LEDs include built-in current limiting resistor and reverse polarity protection diode. 1705151131 www.IDEC.com 550 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - A6 Series Switches & Pilot Devices Appearance Description Used With Part Number Pushbuttons, pilot lights, illuminated ø24mm round, metal (aluminum color), panel cut-out ø20.2mm LA9Z-SM61 pushbutton, selector switches, key selector switches and illuminated selector switches. ø24mm round, plastic (black), square panel cut-out ø20.2mm LA9Z-S61B Flush Bezel A6 Switch + 24mm square, plastic (black), panel cut-out 20.2 x 20.2mm LA9Z-S71B Flush Bezel 24 x 30mm rectangular, plastic (black), rectangular = LA9Z-S81B panel cut-out ø20.2 x 26.2mm Switch Guard w/ Flush Bezel Rectangular, plastic (black) LA9Z-KS8 Flush Switch (spring return) Schematics — A Series: 5/8” (16mm) Terminal Arrangement (Top View) Non-illuminated Pushbuttons and Selector Illuminated Pushbuttons Switches Pilot Lights (TOP) (TOP) (TOP) (TOP) (TOP) NC1 NC1 NC2 NC1 NC2 NC1 NO1 NO1 NO2 NO1 NO2 NO1 Lamp Lamp C1 Terminal (+) Terminal (–) C1 C2 Lamp Lamp C1 C2 C1 Lamp Lamp Terminal (+) Terminal (–) Terminal (+) Terminal (–) SPDT Contact DPDT Contact SPDT Contact DPDT Contact (Single-pole/Double Throw) (Double-pole/Double Throw) (Single-pole/Double (Double-pole/Double Throw) Throw) IDEC’s Superbright LED Internal Circuits LATD-1,-2,-6 (GS) LATD-5 (ARWY) LED Chip Protective Diode Zener Diode LATD-1,-2,-6 (ARWY) LATD-5 (GS) 1705151131 800-262-IDEC (4332) • USA & Canada 551 TOP ø16mm - A6 Series Switches & Pilot Devices Dimensions (mm) Pushbuttons, Ø 5/8” (16mm) Rubber Gasket Panel Thickness 0.5 to 6 Terminal Width 2.8×0.5t Anti-rotation Ring ø18 Round 2.5 3 Rectangular Square Locking Ring ( ) TOP ( ) ( ) TOP TOP 1 0.6 5.7 24 18 8229 9 Oversize Lens Rubber Gasket Anti-rotation Ring Panel Thickness 0.5 to 6 Teminal Width 2.8×0.5t Rectangular Round Square Locking Ring ( ) (TOP) (TOP) TOP 2.5 3 66 1 0.6 9 23.5 0.6 9 0.6 822 15.5 15.5 12.5 Selector Switches, Ø 5/8” (16mm) Panel Thickness 0.5 to 6 Rubber Gasket Terminal Width 2.8×0.5t Anti-rotation Ring Rectangular Square Round 2.5 3 ( ) ( ) ( ) TOP TOP TOP Locking Ring 8 1 822 15.5 24 18 Key Selector Switches, Ø 5/8” (16mm) Right Contact Left Contact Rubber Gasket Anti-rotation Ring Rectangular Square Round Panel Thickness 0.5 to 6 Terminal Width 2.8×0.5t ( ) ( ) ( ) TOP TOP TOP Locking Ring 2.5 3 N C N O C 1 82226 24 18 ø18 All dimensions are in mm. 1705151131 www.IDEC.com 552 ø18 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices 5 5 5 5 5 5 5 5 3 2.5 17.5 18 23.5 18 18 ø23.5 Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers R22 R22 ø16mm - A6 Series Switches & Pilot Devices Switch Guard, Ø 5/8” (16mm) Panel Thickness 34 0.5 to 5 Panel Thickness 32 0.5 to 5 18 24 Rubber Gasket Rubber Gasket 14 28 14 28 (90°/110° opening type) (180° opening type) 19 minimum 25 minimum Panel Thickness 34 0.5 to 5 Waterproof Gasket 18 24 for Switch Guard Rubber Gasket 0.4 14 28 19 min. 25 min. Flush Bezel Flush Bezel with Switch Panel Thickness 0.5 to 5 Panel Thickness 0.5 to 5 Mounting Flush Bracket Gasket Bezel Metal Plastic Round 1 9 43 2 0.9 0.8 8 29 2 9.8 8.5 2 Square Selector Switches Illuminated & Non-illuminated Key Lever 8.5 2 Rectangular 2 2 2 8.5 18.1 17 24 30 9.3 2 Flush Bezel Mounting Hole Layout Round Square Rectangular +0.2 +0.2 20.2 26.2 – 0.1 – 0.1 30 min.∗ 24 min.∗ 24 min.∗ 1705151131 800-262-IDEC (4332) • USA & Canada 553 ø18 ø18 +0.2 ø20.2 – 0.1 ø24 ø24 24 min.∗ 23.5 23.5 10.5 13 10.5 13 23 22.6 26.5 minimum 45.5 min. (45.5 minimum for 180° opening type) 27.4 21.4 21.4 ø21.4 23.5 23.5 10.5 13 10.5 13 24 min.∗ 26 20 ø 20 20 24 24 18 18 45.5 min. 26.5 minimum (45.5 minimum for 180° opening type) 14.8 33 +0.2 20.2 -0.1 33 24 min.∗ 1 OD ø16mm - A6 Series Switches & Pilot Devices +0.3 Terminal 1.5×0.3t 8-1.6 0 Holes TOP 33.5 2.5 3 33.5 2.5 3 ( ) TOP NC1 NC2 NO1 NO2 C1 C2 16.2 7.5 66 16.2 3.8 66 Lamp Lamp Terminal (+) Terminal ( ) – Solder Terminal Type PC Board Terminal Type PC Board Terminal Arrangement Mounting Hole Layout (AL-C6) (AL-C6V) (Bottom View) (Bottom View) Terminal Sockets Dust Covers Panel Cut-Outs For Units w/Dust Cover AL-D6, Round AL-DQ6, Square AL-DH6, Rectangular Round/Square Rectangular +0.2 ø24 24 30 ø16.2 0 +0.2 ø16.2 0 30 min. 24 min. Waterproof Gasket Waterproof Gasket Waterproof Gasket for Dust Cover for Dust Cover for Dust Cover Marking Plates Pushbuttons with Standard Size Lens Pushbuttons with Oversize Lens Style Round—AL6M-W Square—AL6Q-W Rectangular—AL6H-W Style Round—AL6M-MW Square/Rectangular—AL6Q-QW 2 OD øa øOD Engraving Marking Engraving ❏OD ❏a Area Area Area Dimensions øa ca Dimensions 2 a Marking Marking Area Area Ø 5/8” (16mm) Outside (OD) Ø 0.491” (12.6mm) 0.491” (12.6mm) 1 2 (OD x OD ) 13.8 x Marking Area Outside (OD) (13.8mm) (13.8mm) Ø 0.429” (11mm) 0.429” (11mm) 19.8mm (a) Marking Area 1 2 (12mm) (12mm) (a xa ) 12 x 18mm (a) Engraving must be made on the engraving area within 0.02” (0.5mm) deep. Replacing and Marking Plate Removal Installation Remove the lens holder assembly (lens, marking plate and holder) from the opera- For illuminated pushbuttons: tor by holding the color lens recesses with the lens removal tool (Part No.MT-101) 1. Insert marking plate inside lens in correct direction and pulling out. Remove marking plate by pushing the color lens from the rear to 2. Press color lens on to lens holder to engage latches. disengage the latches. Marking plate must be engraved on the side as shown in 3. Insert lens holder into housing in correct direction. Do not loosen spring on illuminated pushbutton units (except on pilot light units). The the figure on the right. marking plate must be engraved on the front side as shown above. Ø 5/8” (16mm) Fitting Grooves Grooves Engraving Surface Color Lens Marking Plate Lens Holder 1705151131 www.IDEC.com 554 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices 0.3 13 7.5 øOD 0.8 2.4 0.3 13 7.5 0.8 øOD 5 5 1 0.8 a 0.3 13 7.5 24 24 min. 5 5 24 min.
Frequently asked questions
How does Electronics Finder differ from its competitors?
![chervon down](/assets/images/chervon-down.png)
Is there a warranty for the AL6M-P3-R?
![chervon down](/assets/images/chervon-down.png)
Which carrier will Electronics Finder use to ship my parts?
![chervon down](/assets/images/chervon-down.png)
Can I buy parts from Electronics Finder if I am outside the USA?
![chervon down](/assets/images/chervon-down.png)
Which payment methods does Electronics Finder accept?
![chervon down](/assets/images/chervon-down.png)
Why buy from GID?
![quality](/assets/images/quality.png)
Quality
We are industry veterans who take pride in our work
![protection](/assets/images/protection.png)
Protection
Avoid the dangers of risky trading in the gray market
![access](/assets/images/access.png)
Access
Our network of suppliers is ready and at your disposal
![savings](/assets/images/savings.png)
Savings
Maintain legacy systems to prevent costly downtime
![speed](/assets/images/speed.png)
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods