IDEC CORPORATION B5-31
Specifications
Manufacturer
IDEC Corporation
Manufacturers Part #
B5-31
Lead Time
9 Week Lead Time
Sub-Categories
Miscellaneous Tools and Supplies
Factory Pack Quantity
1
Datasheet
LT1Series.pdf
564 KiB
Extracted Text
Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks 56mm LT1 Series Light Towers SignaLight Towers Display Lights 56mm L T1 Series Light Towers Display Lights with a Tower of Advantages Key features of the LT1 series SignaLight towers include: Base Mount • Custom confi gurations meet your specifi cations—simply • Select your fl ash preference, lens colors, number of tiers, mounting style, and voltage • Choice of LED or incandescent lamps LED lamps provide over 100,000 hours of service life and are interchangeable with incandescent bulbs Incandescent lamps (available up to 10 watts) are vibration-resistant and provide a 2,000 hour service life • Replace the bulbs independently; no need to disassemble the entire unit • Heat- and shock-resistant polycarbonate lenses • Flashing models allow each lamp to be fl ashed or steady • Choice of metallic base or cost-saving plastic base Pole Mount • Color-coded wires make assembly and wiring easy (with “L" bracket) • Mounting options include base and pole mount File #E70646 USA: 800-262-IDEC Canada: 888-317-IDEC 685 SignaLight Towers Display Lights LT1 Specifi cations LT1A: Incandescent, Non-Flashing LT1D: Incandescent, Flashing/Non-Flashing LT1H: LED, Non-Flashing LT1K: LED, Flashing/Non-Flashing Nominal Voltage 12V AC/DC ±10% 24V AC/DC ±10% 120V AC ±10% 240V AC ±10% Internal Fuse Rating 3.15A 3.15A 1A 1A LED 12V AC/DC 24V AC/DC 120V AC N/A Lamp Rating Incandescent 12V, 6W 30V, 10W 120V, 7W 240V, 10W Red Green Yellow White Blue 12V DC 54mA 78mA 54mA 54mA 78mA Current LED N/A 24V DC 54mA 39mA 54mA 54mA 39mA Required per Lamp 120V AC 30mA 30mA 30mA 30mA 30mA Incandescent 0.4A ±10% 0.3A ±10% 0.06A ±10% 0.05A ±10% External Contact Capacity 5A 5A 2A 1A In-Rush LED Not applicable Current Incandescent Below 4.0A Below 3.0A Below 0.6A Below 0.5A per Lamp LED BA15D lamp base Lamp Style Incandescent T20 glass bulb, BA15D lamp base LED 100,000 hours (minimum) Lamp Life-Span Incandescent 2,000 hours (average) Lens Colors Red, Yellow, Green, Blue, White Lens Diameter 2.20" (56mm) Maximum Tiers 5 Degree of Protection IP20 (for indoor use only), NEMA1 LED: 45/minute ±10% (LT1K only) Flash Rate Incandescent: 80/minute ±10% (LT1D only) Insulation Resistance More than 3MΩ by a DC 500V megger Voltage Resistance 1,500V AC for 1 minute Operating Range –30 to +40°C (LT1A), –10 to +40°C (LT1D), 15 to 90% relative humidity Vibration Resistance 2.2G maximum Base mount (three stud) Pole mount (horizontal or vertical surface) Mounting NPT mount (via adaptor) to 1/2"" or 3/4"" NPT conduit Install in an upright position Optional Pole Height 10.75" (273mm) Approvals File #E70646 Non-fl ashing (steady): 20 AWG Wire Size Flashing: 18 AWG and 20 AWG 686 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Specifi cations Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks SignaLight Towers Display Lights LT1 Part Numbers (assembled) Part Number Guide ➀➁➂➃ ➄➅➆ ➇➈ assembled LT1 A –– 3 5 3 R Y G Light source Number Voltage Mounting Color code and function of tiers style and base des- . ignation Part Numbers: Assembled Parts Box No. Description Code Non-fl ashing (steady), incandescent lamp A Flashing/non-fl ashing, incandescent lamp D Light source j and function Non-fl ashing (steady), LED lamp H Flashing/non-fl ashing, LED lamp K Number of tiers Maximum of 5 tiers 1–5 k 12V AC/DC 1 24V AC/DC 2 Voltage l 120V AC 5 240V AC (incandescent only) 8 Beige frame cover 1 Metallic frame cover 2 Mounting style and m base designation Beige frame cover, pole incl. 3 Metallic frame cover, pole incl. 4 Red R Yellow Y Color code Green G n – r Blue S White W *Specify lens color code from the lowest to the highest tier. Examples: Assembled Parts Part No. Description Non-fl ashing incandescent, 3 tiers, 120V AC, pole-mount, metallic LT1A-354-RRR base, all Red lenses Flashing/non-fl ashing incandescent, 1 tier, 240V AC, base-mount, LT1D-182-S metallic base, Blue lens Flashing/non-fl ashing incandescent, 2 tier, 24V AC/DC, base-mount, LT1D-221-RS plastic base, Red and Blue lenses Non-fl ashing LED, 4 tier, 12V AC/DC, base-mount, metallic base, Red, LT1H-412-RGYW Green, Yellow, and White lenses Flashing/non-fl ashing LED, 5 tier, 120V AC, pole-mount, metallic base, LT1K-554-GSRGR Green, Blue, Red, Green, and Red lenses USA: 800-262-IDEC Canada: 888-317-IDEC 687 SignaLight Towers Display Lights LT1 Part Numbers (sub-assembled) Complete = Part Top Cap Lamps Lenses Frame Part Numbers: Frame Description Part No. Notes Examples j = Type Frame A = Incandescent, non-fl ashing D = Incandescent, fl ashing/non-fl ashing H = LED, non-fl ashing LT1A-0142M = Steady light, four tiers, 24V AC/DC, K = LED, fl ashing/non-fl ashing metallic base k = Number of tiers (1–5) LT1j-01kl* l = Lamp voltage LT1D-0125P = Flashing light, two tiers, 120V AC, 1 = 12V AC/DC plastic base 2 = 24V AC/DC 5 = 120V AC 8 = 240V AC * = Frame cover (M = metallic, P = beige) Bill of Materials Quantities Description Quantity Body frame Required: 1 per unit Lens(es) Variable: from 1–5 Top cap Required: 1 per unit Lamps Variable: from 1–5 Mounting pole Optional: 1 per unit 688 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks SignaLight Towers Display Lights LT1 Accessories Part Numbers: Accessories kLens/LED Color Code Description Part No.Remarks Color Code LED Lamp 12V AC/DC LTXD-1k See chart for available colors Green G 24V AC/DC Red R LTXD-2k See chart for available colors Blue S White W 120V AC LTXD-120k Yellow Y See chart for available colors Incandescent Lamp B5-21 12V AC/DC, 6W B5-31 30V, 10W (for use with 24V AC/DC) B5-1 120V AC, 7W B5-4 240V AC, 10W Lens See chart for available colors LT1X-08Ç Top Cap LT1X-06 Clear polycarbonate Mounting Pole Chrome-plated steel supplied with “L" bracket and two M22 x LT1Z-10 1.5 hexagonal nuts Pole Mounting Fixture Aluminum fi xture for mounting pole-mounted units to horizontal LT1Z-11 surface; not included with assembled SignaLight units NPT Pole Adaptors 1/2" NPT pole adapter; not included with assembled SignaLight LT1Z-NPT50 units 3/4" NPT pole adapter; not included with assembled SignaLight LT1Z-NPT75 units In place of k specify lens/LED color code from chart at right. USA: 800-262-IDEC Canada: 888-317-IDEC 689 3.12" (81mm) SignaLight Towers Display Lights LT1 Wiring 5 5 Wiring is color-coded External Contact Connections External Contact Connections to match the number 4 4 of tiers 1 tier = R 2 tier = RY 3 tier = RYB 3 3 4 tier = RYBS 5 tier = RYBSW 2 2 Color Codes: R = Red Y = Yellow 1 B = Brown 1 S = Blue W = White Common Cable Common Cable for Non-flashing for Flashing (Orange) (White) + AC/DC Power Source - Black = Negative, Black/White = Positive Common Cable = (White) (observe polarity for DC applications) LT1A/LT1H: Non-Flash Series LT1D/LT1K: Flash/Non-Flash Series SignaLight Dimensions Assembled Base Mount Assembled Pole Mount Mounting Hole Layout: Base Mounting Style Number of L1 Tiers 1 6.7" (170mm) 2 9.4" (240mm) 3 12.2" (310mm) 4 15.0" (380mm) 5 17.7" (450mm) 690 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks SignaLight Towers Display Lights LT1 Dimensions con’t Adapter LT1Z-NPT50 LT1Z-NPT75 Optional Pole Mounting Base: Side View (LT1Z-11) Mounting Pole (LT1Z-10) Optional Pole Mounting Base: Bottom View Mounting Bracket (provided with mounting pole) 2- 02" (5mm) ø2.9" (73mm) ø0.9" (22mm) 2–0.2" x 0.3" (4.5 x 8mm) 2–0.2" x 0.4" (4 x 10mm) USA: 800-262-IDEC Canada: 888-317-IDEC 691
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the B5-31?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods