COLORONC.book Page 1 Monday, August 16, 1999 1:21 PM OpenNet Controller Electrical Specifications FC3A-CP2K, -CP2KM* High-speed counter sink output FC3A-CP2S, -CP2SM* High-speed counter source output Rated Voltage 24V DC (19-30V DC, including ripple) Maximum Input Current 1.5A at 24V DC Prevents damage if incorrectly wired. Reverse Polarity Protection Operating Temperature 0 to +55°C Storage Temperature -25 to +70°C Relative Humidity 30 to 95% (non-condensing) 10 to 57 Hz, amplitude 0.075mm 2 Vibration Resistance 57 to 150 Hz 9.8 m/sec 10 sweep cycles/axis (IEC 1131) 2 147 m/sec , 11 ms Shock Resistance 3 shocks each in 3 axes (IEC 1131) Between power terminal and FG: 500V AC, 1 min Dielectric Strength Between I/O terminal and FG: 1500V AC, 1 min Ground Grounding resistance 100W (maximum) Mounting Style 35mm DIN rail Hardware Features • Digital I/O - 8, 16, and 32 point cards - 224 inputs and outputs, 480 with expansion power supply • Analog I/O - up to 42 analog inputs or 14 analog outputs - 0-5V, 0-10V, ±5V, ±10V, 4-20mA • Built-In Communications Ports FC3A-CP2K - 2 RS232 (programming port, ASCII, printer and modem ready) FC3A-CP2S - 1 RS485 (programming port and data link) • Build-in High-Speed Counter - 1 channel, 10kHz, 16-bit resolution • Memory - 16K words (8K steps) user program capacity - Flash miniature memory card slot (FC3A-CP2KM/SM* only) • Realtime Calendar/Clock, Y2K compliant • Password Protection • PID Algorithm ONC Capabilities •Networking - Built-in X/Y Conversion ONC capable of communicating with various standard networks: - Sub-Routine Call/Return for Modular Programming - DeviceNet - Square Root - INTERBUS - 16- and 32-bit Math, Add, Sub, Mult, Div - LONWORKS - Data Conversion to/from Dec, Hex, BCD, ASCII •Programming Software; WindLDR® 3.0 - Block Move - Programs all IDEC PLCs - Summation - Windows-based (compatible with Windows 3.10, 3.11, - Averaging Win 95 or Win 98) - Day of Week Program Scheduling •Programming Instructions •Built-in Hayes "AT" command set for modem dialup/pager applications - Transmit/Receive *FC3A-CP2KM/SM will be available soon For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089 Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC COLORONC.book Page 2 Monday, August 16, 1999 1:21 PM Powered by IDEC’s PS5R Series 50W Power Supply PS5R Power Supply Wattage & Current Ratings 50W, 2.1A Rating UL 508 listed Mounting DIN rail mountable Standard ONC CPU Available Instructions 37 basic, 65 advanced (PID, square root, subroutine calls, etc.) User Program Capacity 16K words flash memory Memory (Miniature Card) 2, 4 and 8MB; 5V type 1 ms or greater Average Scan Time Input 224 points (I0-I277) Output 224 points (Q0-Q277) Total I/O Points Using expansion power supply: 480 I/O points Internal Relay 2048 (M0-M2557) 192 (M8000-M8237) Special Internal Relay Shift Register 256 (R0-R255) Timer 256 (T0-T255; 1-sec, 100-msec, 10-msec, 1-msec) 256 (C0-C255; adding, dual pulse reversible, up/down selection Counter reversible) Data Register 8000 (D0-D7999) 256 master (L1000 - L1317), Link Register 168 slave (L100 - L127, L200 - L227, ......, L700 - L727) Remote I/O 512 points Real-Time Calendar/Clock Runtime Yes (Y2K complaint) Program Protection Yes (password protected) External Run/Stop Control Yes Yes Power Failure Protection Self-Diagnostics Yes Auto Start Function Yes The eighth slot must be expansion power supply module. (Above photo is only an example of the range of available modules.) General ONC Specifications PS5R-D24 COM A B Z HSC RS485 +24V 0V OUTAB G COLORONC.book Page 3 Monday, August 16, 1999 1:21 PM OpenNet Controller, Networking & Applications 0 1 2 3 4 5 6 PC Communication 7 8 9 10 11 12 13 14 15 16 17 RS232C Port 1 or Port 2 The ONC is programmed by our intuitive WindLDR™ Computer Link Cable 4C 3.0 software FC2A-KC4C -use RS232 or RS485 ports 3m (9.84 ft.) long -upload, download and monitor programs D-sub 9-pin Female Connector For RS485 programming, use FC2A-KC6C cable. Master Station Slave Station 1 Slave Station 2 Slave Station 31 0 0 0 1 1 1 Data Link - Superiority in Networking 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 7 7 7 8 8 8 9 9 HG Series 9 10 10 10 11 11 11 12 12 12 Connect up to 32 ONC, Micro3, FA Series PLCs or 13 13 13 14 14 14 Operator 15 15 15 16 16 16 17 17 17 the HG Series operator interface on the data Interface link network. Communication Selector DIP Switch 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1st Unit 17 RS232C/RS485 Converter FC2A-MD1 Computer Link - Power & Versatility D-sub 9-pin Connect 32 ONCs on a 1:N computer link system. 0 1 Female Connector 2 3 RS232C Cable 4 5 6 7 8 9 HD9Z-C52 10 Upload, download, monitor, and update data. 11 12 13 1.5m (4.92 ft.) long 14 15 16 2nd Unit 17 Twist-pair Shielded Cable 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32nd Unit 17 RS485 POWER RUN ERROR HSC OUT Communication Flexibility Modem DIP Switch Easy connections to any R232C equipment through the user defined RS232C port 1 or 2. Built-in Hayes “AT” command set for direct modem dialup and pager applications. Printer Barcode Reader O N 123 COLORONC.book Page 4 Monday, August 16, 1999 1:21 PM Network Communication System The ONC offers versatility and power with the unique capability to inferface with standard networks such as INTERBUS, DeviceNet and LONWORKS. Add 8 or 16 I/O points to the remote I/O network with a simple connection: SX5S commu- nication terminals offer a simple and low cost method of system expansion. OpenNet Interface Modules Expansion Connector Expansion Connector Expansion Connector (1) Module ID (1) Module ID (1) Module ID (5) Status LED (4) Status LED (5) Status LED (2) FG Terminal (2) FG Terminal (2) DIP Switch (3) Connector 1 (3) Service Request (4) Connector 2 (3) Connector (4) Connector INTERBUS DeviceNet LONWORKS 8/99 SERVIOSE REQUESI NETWORK COLORONC.book Page 5 Monday, August 16, 1999 1:21 PM Analog Input and Output Modules Key Features • One card handles 5 different signal types, [±5V, ±10V, 0-5V, 0-10V, or 4-20mA], switch selectable • Input module has 6 inputs per card, 7 cards per CPU, 42 analog input points maximum • Output module has 2 outputs per card, 7 cards per CPU, 14 analog output points maximum • 12-bit resolution, 0-4000 counts, count range divides evenly • Fast input conversion, 3ms + 1 scan time • I/O error ±0.6% full scale @25°C • Convenient input termination, Phoenix Contact type connector General Specifications Analog Type Input Output Point Per Card 6 Points 2 Points Part Number FC3A-AD1261 FC3A-DA1221 Connector Type Phoenix Contact Phoenix Contact 0-10V DC, ±10V DC, 0-5V DC, 0-10V DC, ±10V DC, 0-5V DC, Input Signal ±5V DC, 4-20mA ±5V DC, 4-20mA Resolution 12 bits 12 bits Range 0-4000 counts 0-4000 counts Input Error ±0.6% of full scale @ 25°C NA Output Error NA ±0.6% of full scale @ 25°C Conversion Time 3ms per point NA Analog Output Module FC3A-DA1221 Settling Time NA 3ms Voltage: 1 MW minimum Input Impedance NA Current: 250W Output Load Voltage=2 kW minimum NA Impedance (Current=250W, 300W max.) Internal Current 120mA@24V DC 120mA@24V DC Draw Type of Protection Analog Input Module Analog Output Module +V +V Voltage Output Voltage Input + Current Input 250W– COM Current Output Differential Amplifier COM –V –V For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089 Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC COLORONC.book Page 6 Monday, August 16, 1999 1:21 PM FC3A-AD1261 Analog Input Module Terminal Arrangement 6-Channel - Screw Terminal Type Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal No. Channel Name 1 +V (voltage) 2 Channel 0 +I (current) A/D 3 COM (-V, -I) 4 +V (voltage) PCW 5 Channel 1 +I (current) 6 COM (-V, -I) 7 +V (voltage) 8 Channel 2 +I (current) 9 COM (-V, -I) 10 +V (voltage) 11 Channel 3 +I (current) 12 COM (-V, -I) 13 +V (voltage) 14 Channel 4 +I (current) 15 COM (-V, -I) 16 +V (voltage) 17 Channel 5 +I (current) 18 COM (-V, -I) 19 — NC 20 — NC FC3A-DA1221 Analog Output Module Terminal Arrangement 2-Channel - Screw Terminal Type Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal Rotary Switch Channel Name No. Position 1 Voltage Output (0 to 10V) 0 2 COM (GND) D/A 3 Voltage Output (±10V) 1 PCW 4 COM (GND) 5 Voltage Output (0 to 5V) Channel 0 2 6 COM (GND) 7 Voltage Output (±5V) 3 8 COM (GND) 9 Current Output (4 to 20mA) 4 10 COM (GND) 11 Voltage Output (0 to 10V) 0 12 COM (GND) 13 Voltage Output (±10V) 1 14 COM (GND) 15 Voltage Output (0 to 5V) Channel 1 2 16 COM (GND) 17 Voltage Output (±5V) 3 18 COM (GND) 19 Current Output (4 to 20mA) 4 20 COM (GND) 8/99 COLORONC.book Page 7 Monday, August 16, 1999 1:21 PM 16-Point DC Input Modules Key Features • One card handles sink (NPN) or source (PNP) type input signals • 16 points per card, 7 cards local, 8 cards expansion, 15 cards max. per CPU • 19-30V DC input voltage range • Software selectable input filtering, 0-32 msec • High-speed catch inputs, first 8 points user definable, pulse detection within 20-120μsec range • Termination connector -FC3A-N16B1 - removable Phoenix Contact type -FC3A-N16B3 - removable Nylon type General Specifications Input Type DC Sink/Source Part Number FC3A-N16B1 FC3A-N16B3 Connector Type Phoenix Contact Nylon Input Voltage Range 19-30V DC 19-30V DC Rated Input Voltage 24V DC 24V DC Current Per Point 7mA 7mA Internal Current - all inputs ON 40mA 40mA Input Impedance 3.4kW3.4kW On/Off Voltage 15/5V DC 15/5V DC On/Off Time 20/120μs 20/120μs DC Input Module FC3A-N16B1 FC3A-N16B3 Input Operating Range Input Internal Circuit The input operating range of the Type 1 (EN61131) input module is shown below: 30 COM ON Area 24 Input 15 Transition Area 5 OFF Ar ea 0 1.5 4.4 7 8.8 Input Cur rent (mA) For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089 Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC Input Voltage (V DC) Internal Circuit COLORONC.book Page 8 Monday, August 16, 1999 1:21 PM FC3A-N16B1 Input Module Terminal Arrangement 16-Point DC - Screw Terminal Type Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal No. Name 1 COM 2 COM DC IN 3I0 4I1 0 1 2 5I2 3 4 5 6I3 6 7 10 7I4 11 12 13 8I5 14 15 9I6 16 17 10 I7 11 COM 12 COM 13 I10 14 I11 15 I12 16 I13 17 I14 18 I15 19 I16 20 I17 FC3A-N16B3 Input Module Terminal Arrangement 16-Point DC - Nylon Connector Type Applicable Connectors: VHR-10N (J.S.T. Mfg.) Terminal No. CN1 SVH-21T-P1.1 (J.S.T. Mfg.) 1 COM 2 COM CN1 DC IN 3I0 4I1 0 1 2 5I2 3 4 6I3 5 6 7 7I4 10 11 12 8I5 13 14 15 9I6 16 17 CN2 10 I7 Terminal No. CN2 1 COM 2 COM 3 I10 4 I11 5 I12 6 I13 7 I14 8 I15 9 I16 10 I17 8/99 COLORONC.book Page 9 Monday, August 16, 1999 1:21 PM 32-Point DC Input Modules Key Features • One card handles sink (NPN) or source (PNP) type input signals • 32 points per card, 7 cards local, 8 cards expansion, 15 cards max. per CPU • 20-28V DC input voltage range • Software selectable input filtering, 0-32 msec • High-speed catch inputs, first 8 points user definable, pulse detection within 20-120μsec range • Termination connector -FC3A-N32B4 - removable Nylon type -FC3A-N32B5 - removable Fujitsu type General Specifications Input Type DC Sink/Source Part Number FC3A-N32B4 FC3A-N32B5 Connector Type Nylon Fujitsu Input Voltage Range 20-28V DC 20-28V DC Rated Input Voltage 24V DC 24V DC Current Per Point 5mA 5mA Internal Current 50mA 50mA -all inputs ON Input Impedance 4.7kW4.7kW On/Off Voltage 15/5V DC 15/5V DC DC Input Module On/Off Time 20/120μs 20/120μs FC3A-N32B4 FC3A-N32B5 Input Operating Range Input Internal Circuit The input operating range of the Type 1 (EN61131) input module is shown below: 27.6 24 COM ON Area 15 Transition Area Input 5 OFF Ar ea 0 1 4.4 5.4 4.9 Input Cur rent (mA) For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089 Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC Input Voltage (V DC) Internal Circuit COLORONC.book Page 10 Monday, August 16, 1999 1:21 PM FC3A-N32B4 Input Module Terminal Arrangement 32-Point DC - Nylon Connector Type Applicable Connectors: H18-SHF-AA (J.S.T. Mfg.) Terminal No. CN1 CN2 SHF-001T-0.8BS (J.S.T. Mfg.) 18 I0 I20 17 I1 I21 CN1 DC 16 I2 I22 IN 15 I3 I23 0 1 14 I4 I24 2 3 4 13 I5 I25 5 6 12 I6 I26 7 10 11 11 I7 I27 12 13 14 10 I10 I30 15 16 CN2 17 9 I11 I31 20 21 22 8 I12 I32 23 24 25 7 I13 I33 26 27 6 I14 I34 30 31 32 5 I15 I35 33 34 35 4 I16 I36 36 37 3 I17 I37 2 COM COM 1 COM COM FC3A-N32B5 Input Module Terminal Arrangement 32-Point DC - Fujitsu Connector Type Applicable Connector: FCN-367J040-AU (Fujitsu) Terminal No. Name Terminal No. Name B20 I0 A20 I20 B19 I1 A19 I21 DC IN B18 I2 A18 I22 0 B17 I3 A17 I23 1 2 3 B16 I4 A16 I24 4 5 B15 I5 A15 I25 6 7 10 B14 I6 A14 I26 11 12 13 B13 I7 A13 I27 14 15 16 B12 I10 A12 I30 17 20 21 B11 I11 A11 I31 22 23 B10 I12 A10 I32 24 25 26 B9 I13 A9 I33 27 30 31 B8 I14 A8 I34 32 33 34 B7 I15 A7 I35 35 36 37 B6 I16 A6 I36 B5 I17 A5 I37 B4 NC A4 NC B3 NC A3 NC B2 COM A2 NC B1 COM A1 NC 8/99 COLORONC.book Page 11 Monday, August 16, 1999 1:21 PM 8-Point AC Input Module Key Features • 8 points per card, 7 cards local, 8 cards expansion, 15 cards max. per CPU • 100-120V AC rated input voltage • 85-132V AC input voltage range • On/off detection set at 20ms • Convenient termination connector, removable Phoenix Contact type General Specifications Input Type AC Part Number FC3A-N08A11 Connector Type Phoenix Contact Input Voltage Range 85-132V AC Rated Input Voltage 100-120V AC Current Per Point 8mA Internal Current - all inputs ON 30mA Input Impedance 12 kW (60Hz) On/Off Voltage 79/20V AC On/Off Time 20ms AC Input Module FC3A-N08A11 Input Operating Range Input Internal Circuit The input operating range of the Type 1 (EN61131) input module is shown below: COM 132 ON Area 100 Input 79 Transition Area OFF Ar ea 20 0 1.6 6.5 8.3 11 Input Cur rent (mA) For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089 Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC Input Voltage (V AC) Internal Circuit COLORONC.book Page 12 Monday, August 16, 1999 1:21 PM FC3A-N08A11 Input Module Terminal Arrangement 8-Point AC - Screw Terminal Type Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal No. Name 1 COM0 2I0 AC IN 3 COM1 4I1 0 1 2 5 COM2 3 4 5 6I2 6 7 7 COM3 8I3 9 COM4 10 I4 11 COM5 12 I5 13 COM6 14 I6 15 COM7 16 I7 17 NC 18 NC 19 NC 20 NC 8/99 COLORONC.book Page 13 Monday, August 16, 1999 1:21 PM 16-Point Relay Output Modules Key Features • 16 points per card, 4 points per common, 15 cards max. per CPU • Outputs rated 240V AC/2A or 24V DC/2A • Turn On/Off delay 6-10ms • 20,000,000 operations per relay minimum • Termination connector -FC3A-R161 - removable Phoenix Contact type -FC3A-R162 - removable Nylon type General Specifications Output Type Relay Output Part Number FC3A-R161 FC3A-R162 Connector Type Phoenix Contact Nylon Rated Output Voltage 240V AC/24V DC 240V AC/24V DC Rated Current Per Point 2A 2A Internal Current 170mA 170mA - all inputs ON On/Off Time 6/10ms 6/10ms Relay Output Module FC3A-R161 FC3A-R162 Output Delay Command Output Status OFF delay: 10 msec maximum Chatter: 6 msec maximum ON delay: 6 msec maximum For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089 Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC COLORONC.book Page 14 Monday, August 16, 1999 1:21 PM FC3A-R161 Output Module Terminal Arrangement 16-Point Relay - Screw Terminal Type Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal No. Name 1 COM0 2Q0 Ry OUT 3Q1 0 4Q2 1 2 5Q3 3 4 5 6 COM1 6 7 10 7Q4 11 12 13 8Q5 14 15 16 9Q6 17 10 Q7 11 COM2 12 Q10 13 Q11 14 Q12 15 Q13 16 COM3 17 Q14 18 Q15 19 Q16 20 Q17 FC3A-R162 Output Module Terminal Arrangement 16-Point Relay - Nylon Connector Type Applicable Connectors: VHR-5N (J.S.T. Mfg.) Terminal No. CN1 Terminal No. CN3 SVH-21T-P1.1 (J.S.T. Mfg.) 1 COM0 1 COM2 2Q0 2 Q10 CN1 Ry 3Q1 3 Q11 OUT 4Q2 4 Q12 0 5Q3 5 Q13 1 2 3 4 CN2 5 6 7 10 11 12 13 Terminal No. CN2 Terminal No. CN1 14 15 16 1 COM1 1 COM3 CN3 17 2Q4 2 Q14 3Q5 3 Q15 4Q6 4 Q16 CN4 5Q7 5 Q17 8/99 COLORONC.book Page 15 Monday, August 16, 1999 1:21 PM 16-Point DC Sink Output Modules Key Features • 16 transistor sink outputs per card, 15 cards max. per CPU • Outputs rated 19-30V DC/0.5A • Turn On/Off delay 500μsec max. • Opto-isolated outputs • Termination connector -FC3A-T16K1 - removable Phoenix Contact type -FC3A-T16K3 - removable Nylon type General Specifications Output Type DC Sink Part Number FC3A-T16K1 FC3A-T16K3 Connector Type Phoenix Contact Nylon Rated Output Voltage 19-30V DC 19-30V DC Rated Current Per Point 500mA@ 24V DC 500mA@ 24V DC Internal Current 60mA 60mA - all inputs ON On/Off Time 500/500μs 500/500μs DC Sink Output Module FC3A-T16K1 Output Delay Output Internal Circuit +V Command Output Status Output OFF delay 500 μsec maximum ON delay 500 μsec maximum COM (–) For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089 Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC Internal Circuit COLORONC.book Page 16 Monday, August 16, 1999 1:21 PM FC3A-T16K1 Sink Output Module Terminal Arrangement 16-Point DC - Screw Terminal Type Terminal No. Name Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) 1Q0 2Q1 Tr 3Q2 OUT 4Q3 0 1 5Q4 2 3 4 6Q5 5 6 7Q6 7 10 11 8Q7 12 13 14 9 COM(-) 15 16 17 10 +V 11 Q10 12 Q11 13 Q12 14 Q13 15 Q14 16 Q15 17 Q16 18 Q17 19 COM(-) 20 +V FC3A-T16K3 Sink Output Module Terminal Arrangement 16-Point DC - Nylon Connector Type Applicable Connectors: VHR-10N (J.S.T. Mfg.) Terminal No. CN1 SVH-21T-P1.1 (J.S.T. Mfg.) 1Q0 2Q1 CN1 Tr OUT 3Q2 4Q3 0 1 2 5Q4 3 4 6Q5 5 6 7 7Q6 10 11 12 8Q7 13 14 15 9 COM(-) 16 17 CN2 10 +V Terminal No. CN2 1 Q10 2 Q11 3 Q12 4 Q13 5 Q14 6 Q15 7 Q16 8 Q17 9 COM(-) 10 +V 8/99 COLORONC.book Page 17 Monday, August 16, 1999 1:21 PM 16-Point DC Protect Source Output Module Key Features • 16 transistor protect source outputs per card, 15 cards max. per CPU • Outputs rated 19-30V DC/0.5A • Turn On/Off delay 500μsec max. • Opto-isolated outputs • Termination connector, removable Phoenix Contact type General Specifications Output Type DC Source Part Number FC3A-T16P1 Connector Type Phoenix Contact Rated Output Voltage 19-30V DC Rated Current Per Point 500mA @ 24V DC Internal Current - all inputs ON 70mA On/Off Time 500μs/500μs Protect Source Output Module FC3A-T16P1 Output Delay Output Internal Circuit COM (+) Command Output Status Output OFF delay 500 μsec maximum ON delay 500 μsec maximum Overload Signal –V For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089 Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC Internal Circuit Output Pr otect Device COLORONC.book Page 18 Monday, August 16, 1999 1:21 PM FC3A-T16P1 Protect Source Output Module Terminal Arrangement 16-Point DC - Screw Terminal Type Terminal No. Name Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) 1Q0 2Q1 Tr 3Q2 OUT 4Q3 0 1 5Q4 2 3 4 6Q5 5 6 7Q6 7 10 11 8Q7 12 13 14 9 COM(+) 15 16 17 10 -V 11 Q10 12 Q11 13 Q12 14 Q13 15 Q14 16 Q15 17 Q16 18 Q17 19 COM(+) 20 -V 8/99 COLORONC.book Page 19 Monday, August 16, 1999 1:21 PM 32-Point DC Sink Output Modules Key Features • 32 transistor sink outputs per card, 15 cards max. per CPU • Outputs rated 20.4-27.6V DC/0.1A • Turn On/Off delay 500μsec max. • Opto-isolated outputs • Termination connector -FC3A-T32K4 - removable Nylon type -FC3A-T32K5 - removable Fujitsu type General Specifications Output Type DC Sink Part Number FC3A-T32K4 FC3A-T32K5 Connector Type Nylon Fujitsu Rated Output Voltage 20.4-27.6V DC 20.4-27.6V DC Rated Current Per Point 100mA@24V DC 100mA@24V DC Internal Current 90mA 90mA - all inputs ON On/Off Time 500/500μs 500/500μs DC Sink Output Module FC3A-T32K4 Output Delay Output Internal Circuit +V Command Output Status Output OFF delay 500 μsec maximum ON delay 500 μsec maximum COM (–) For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089 Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC Internal Circuit COLORONC.book Page 20 Monday, August 16, 1999 1:21 PM FC3A-T32K4 Sink Output Module Terminal Arrangement 32-Point DC - Nylon Connector Type Applicable Connectors: H18-SHF-AA (J.S.T. Mfg.) Terminal No. CN1 CN2 SHF-001T-0.8BS (J.S.T. Mfg.) 18 Q0 Q20 17 Q1 Q21 CN1 Tr 16 Q2 Q22 OUT 15 Q3 Q23 0 1 14 Q4 Q24 2 3 4 13 Q5 Q25 5 6 12 Q6 Q26 7 10 11 11 Q7 Q27 12 13 14 10 Q10 Q30 15 16 CN2 17 9 Q11 Q31 20 21 22 8 Q12 Q32 23 24 25 7 Q13 Q33 26 27 6 Q14 Q34 30 31 32 5 Q15 Q35 33 34 35 4 Q16 Q36 36 37 3 Q17 Q37 2 COM(-) COM(-) 1+V +V FC3A-T32K5 Sink Output Module Terminal Arrangement 32-Point DC - Fujitsu Connector Type Applicable Connector: FCN-367J040-AU (Fujitsu) Terminal No. Name Terminal No. Name B20 Q0 A20 Q20 B19 Q1 A19 Q21 Tr OUT B18 Q2 A18 Q22 0 B17 Q3 A17 Q23 1 2 3 B16 Q4 A16 Q24 4 5 B15 Q5 A15 Q25 6 7 10 B14 Q6 A14 Q26 11 12 13 B13 Q7 A13 Q27 14 15 16 B12 Q10 A12 Q30 17 20 21 B11 Q11 A11 Q31 22 23 B10 Q12 A10 Q32 24 25 26 B9 Q13 A9 Q33 27 30 31 B8 Q14 A8 Q34 32 33 34 B7 Q15 A7 Q35 35 36 37 B6 Q16 A6 Q36 B5 Q17 A5 Q37 B4 NC A4 NC B3 NC A3 NC B2 +V A2 COM(-) B1 +V A1 COM(-) 8/99 COLORONC.book Page 21 Monday, August 16, 1999 1:21 PM Expansion Power Supply Module Key Features • Expands the ONC from 224 up to 480 I/O points • Increases I/O and functional modules by 8 • Comes with a cable connector and contacts • Simple, easy and convenient mounting • Install in the 8 slot only General Specifications Specifications Part Number FC3A-EA1 Connector Type Nylon - 5 pin Input Voltage Range 19 - 30V DC (including ripple) Rated Input Voltage 24V DC Internal Current 30mA 10 msec (24V DC), Momentary Power Interruption Level PS-2 (EN61131) Expansion Module FC3A-EA1 Power Supply Wiring Connector 1: NC 2: NC Fuse Power Voltage: 24V DC –+ 3: 24V DC (red) Inrush Current: 50A 4: 0V (blue) (same power source for CPU) 5: FG (green) Ground For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089 Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC COLORONC.book Page 22 Monday, August 16, 1999 1:21 PM FC3A-EA1 Expansion Power Supply Module Mounting Position Mount the expansion power supply module in the eighth slot. 7 modules (I/O and functional) 8 modules (I/O and functional) CPU Module Expansion Power Supply Module A maximum of 7 functional modules can be mounted in any of 15 slots Mount the expansion power supply module only in the eighth slot, otherwise correct allocation of I/O and link register numbers may not occur. 8/99