MicroSmart Pentra with Logic Engine Features • Fast processing speed • Supports 32-bit data processing • IEEE standard Floating Pt. Math • Built-in Modbus master & slave • Field upgradeable firmware • Up to 512 I/Os • Configure up to 56 analog I/Os • Max. of 7 communication ports • Embedded 100kHz HSC & pulse outputs • Online Edit and Simulation Mode • UL Listed for Class 1 Div. 2 Hazardous Locations Slim (Book) Models with Logic Engine All-In-One (Brick) Models FC5A-D16RK1 FC5A-D32K3 FC5A-C10R2 FC5A-C16R2 FC5A-C24R2 FC5A-D16RS1 FC5A-D32S3 FC5A-C10R2C FC5A-C16R2C FC5A-C24R2C 35 basic Instruction Words 88 advanced 92 advanced 76 advanced 76 advanced 81 advanced *1 Program Capacity 62.4KB (10,400 steps) 13.8 KB (2,300 steps) 27KB (4,500 steps) 54KB (9,000 steps) User Program Storage EEPROM (10,000 times rewritable) Basic Instruction 83µs (1,000 steps) 1.16ms (1,000 steps) Processing *2 Time END Processing 0.35ms 0.64ms 7 modules + additional 8 modules Expandable I/O Modules – 4 modules using the expansion interface module Input 8 16 6 9 14 I/O Expansion: 224 Expansion: 224 Expansion: 64 Points Additional: 256 Additional: 256 Output 8 16 4 7 10 Internal Relay 2,048 points 2,048 points Shift Register 256 points 128 points *3 Data Register 42,000 points 2,000 points Expansion Data Register 6,000 points – Counter 256 points 256 points Timer (1-sec, 100-ms, 10-ms, 1-ms) 256 points 256 points Input Filter Without filter, 3 to 15 ms (selectable in increments of 1 ms) Four inputs (I2 through I5) Four inputs (I2 through I5) Catch Input/Interrupt Input Minimum turn on pulse width: 5 µs maximum Minimum turn on pulse width: 40 µs maximum Minimum turn off pulse width: 5 µs maximum Minimum turn off pulse width: 150 µs maximum Maximum Counting Total 4 points Total 4 points Frequency and High-speed Counter Single/two-phase selectable: 100 kHz (2 points) Single/two-phase selectable: 50 kHz (1 point) Points Single-phase: 100 kHz (2 points) Single-phase: 5 kHz (3 points) Counting Range 0 to 4294967295 (32 bits) 0 to 65535 (16 bits) Operation Mode Rotary encoder mode and adding counter mode Quantity 1 point 2 points Analog Potentiometer Data Range 0 to 255 Quantity 1 point Analog Input Voltage Range 0 to 10V DC Voltage – Input Impedance Approx. 100kΩ Input Data Range 0 to 255 (8 bits) Quantity 2 points 3 points Pulse – Output Maximum Frequency 100 kHz Output Voltage Current 24V DC (+10% to -15%), 250 mA Sensor Power Overload Detection — – Supply Isolation Isolated from the internal circuit Port 1 RS232C (maintenance communication, user communications) *4 Port 2 Communication Adapter (optional) Yes Clock Cartridge (optional) Yes Memory Cartridge (optional) Yes HMI Module (optional) Yes Modbus Master/Slave Yes Notes: The maximum number of relay outputs that can be turned *3. Extra data registers D10000 through D49999 are enabled *4. Maintenance communication, user communication, on simultaneously is 54 including those on the CPU module. using WindLDR Function Area Settings, then run-time Modem communication, data link, Modbus master/slave *1. One step equals 6 bytes. program download cannot be used. communication (FC5A only). *2. Not including expansion I/O service time, and clock function, data link and interrupt processing time. Specifications con’t on following page Function Specifications High-speed Counter Specifications con’t from front CPU Dimensions - Slim Slim (Book) Models All-In-One with Logic Engine (Brick) Models 47.5 14.6 70.0 FC5A-D16RK1 FC5A-D32K3 FC5A-C10R2 FC5A-C16R2 FC5A-C24R2 FC5A-D16RS1 FC5A-D32S3 FC5A-C10R2C FC5A-C16R2C FC5A-C24R2C Rated Power AC power model: 100 to 240V AC 24V DC Voltage DC power model: 24V DC Allowable Voltage AC power model: 85 to 264V AC 20.4 to 26.4V DC (including ripple) Range DC power model: 20.4 to 28.8V DC (including ripple) Rated Power N/A N/A AC power model: 50/60 Hz (47 to 63 Hz) Frequency *2 Maximum Input 250mA (85V AC) 300mA (85V AC) 450mA (85V AC) *1 FC5A-D16RK1, FC5A-D16RS1 700mA (26.4V DC) *3 Current 160mA (24V DC) 190mA (24V DC) 360mA (24V DC) AC: FC5A-C10R2: AC: FC4A-C16R2: AC: FC4A-C24R2: 47.5 11.3 70.0 30VA (264V AC) 31VA (264 V AC) 40VA (264V AC) Maximum Power *1 *4 *4 *2 19W (26.4V DC) 20VA (100V AC) 22VA (100V AC ) 33VA (100V AC) Consumption DC: FC5A-C10R2C: DC: FC5A-C16R2C: DC: FC5A-C24R2C: *5 *5 *3 3.9W (24V DC) 4.6W (24V DC) 8.7W (24V DC) Allowable Momentary 10ms (at 24V DC) 10ms (rated power voltage) Power Interruption Between power and terminals: 500V AC, 1 minute Between power and or terminals: 1500V AC, 1 minute Dielectric Strength Between I/O and terminals: Between I/O and or terminals: 1500V AC, 1 minute FC5A-D32K3, FC5A-D32S3 1,500V AC, 1 minute Between power and terminals: 10MΩ minumum (500V DC Between power and or terminals: 10MΩ minimum CPU Dimensions - Brick Insulation megger) (500V DC megger) Resistance Between I/O and terminals: Between I/O and or terminals: 10MΩ minimum 80.0 70.0 10MΩ minumum (500V DC (500V DC megger) megger) DC power terminals: AC power terminals: 1.5kV, 50ns to 1µs 1.0kV, 50ns to 1µs Noise Resistance DC power terminals: 1.0kV, 50ns to 1µs I/O terminals (coupling clamp): I/O terminals (coupling clamp): 1.5 kV, 50ns to 1µs 1.5kV, 50ns to 1µs Inrush Current 50A maximum (24V DC) 35A 40A Power Supply Wire 22 - 18AWG Operating FC5A-C10R2, FC5A-C16R2 0 to 55ºC Temperature FC5A-C10R2C, FC5A-C16R2C Storage –25 to +70ºC (no freezing) Temperature 95.0 70.0 Relative Humidity Level RH1 (IEC61131-2), 10 to 95% (no condensation) Altitude Operation: 0 to 2,000m, Transport: 0 to 3,000m Pollution Degree 2 (IEC60664-1) Corrosion Free from corrosive gases Immunity Degree of IP20 (IEC60529) Protection Grounding Wire 22 - 18AWG 16AWG FC5A-C24R2, FC5A-C24R2C When mounted on a DIN rail or panel surface: Vibration 2 5 to 9 Hz amplitude 3.5 mm, 9 to 150 Hz acceleration 9.8 m/s (1G), Resistance All dimensions in mm. 2 hours per axis on each of three mutually perpendicular axes (IEC61131-2) 2 Shock Resistance 147 m/s (15G), 11 ms duration, 3 shocks per axis on three mutually perpendicular axes (IEC61131-2) AC model: 230g AC model: 250g AC model: 305g Weight 230g 190g DC model: 240g DC model: 260g DC model: 310g Notes: *1. CPU module + 7 I/O modules. *2. CPU module (including 250 mA sensor power) + 4 I/O modules. *3. CPU module + 4 I/O modules. *4. CPU module (including 250 mA sensor power). *5. CPU module (24V DC) All-In-One Models Slim Models IDEC Corporation 1175 Elko Drive Sunnyvale, CA 94089 800-262-IDEC (4332) Fax: 408-745-5258 www.idec.com ©2006 IDEC Corporation. All Rights Reserved. 16 I/O Points 32 I/O Points 10 I/O Points 16 I/O Points 24 I/O Points General Specifications 90.0 90.0 90.0 90.0