GT5P Timers GT5P Series — ON Delay Timers Key features: GT5P • SPDT, 5A contacts • 8-pin, octal base • 9 time ranges • Repeat error ±0.2% maximum • Control settings by hand or screwdriver • Power ON and timing out LED indicators • Uses the same sockets and hold down clips as IDEC’s RR2P 8-pin relays UL Recognized CSA Certified File No. E55996 File No. LR66809 Specifications 100 to 120V AC (50/60Hz) 200 to 240V AC (50/60Hz) Rated Operating Voltage 24V AC/DC 12V DC AC type: ±15% Voltage Tolerance DC type: ±10% (ripple 10% maximum) 120V AC/24V DC, 5A Resistive load 240V AC, 3A Contact Rating 240V AC, 0.8A Inductive load 120V AC, 1.4A 24V DC, 1.7A Allowable Contact Power 960VA AC (resistive load) 120W DC Contact Form SPDT Voltage 250V AC, 150V DC Repeat Error ±0.2% ±10msec Voltage Error ±0.5% ±10msec Temperature Error ±3% maximum (over –10 to 50°C, reference temperature 20°C) Setting Error ±10% maximum When turning power off after time up: 0.1 sec maximum Reset Time When turning power off before time up: 1 sec maximum Insulation Resistance 100MΩ minimum Dielectric Strength 2000V AC, 1 minute (except between contacts of the same pole) Vibration Resistance 100N (approximate 10G) Operating extremes: Shock Resistance 100N (approximate 10G) Damage limits: 500N (approximate 50G) 100V AC type: 1.5VA (at 50Hz) Power Consumption 200V AC type: 1.6VA (at 50Hz) 24V DC type: 0.9W Electrical Life 100,000 operations minimum (at rated load) Mechanical Life 20,000,000 operations minimum Operating Temperature –10 to +50°C Operating Humidity 45 to 85% RH 1. Inductive load (reference), cos ø =0.3 to 0.4 or L/R=15msec. 2. Minimum applicable load: 5VDC/10mA (reference). www.IDEC.com 870 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers GT5P Timers Part Numbering List Mode of Rated Time Contact Output Complete Part No. Operation Voltage Range 1S — 3S GT5P-N3SA100 6S — 10S GT5P-N10SA100 100 to 30S GT5P-N30SA100 120V AC 60S GT5P-N60SA100 3M GT5P-N3MA100 6M GT5P-N6MA100 10M GT5P-N10MA100 1S GT5P-N1SA200 3S — 6S GT5P-N6SA200 10S GT5P-N10SA200 200 to 30S GT5P-N30SA200 240V AC 60S GT5P-N60SA200 3M GT5P-N3MA200 6M GT5P-N6MA200 10M GT5P-N10MA200 24V DC/120V AC, 5A ON-Delay SPDT 240V AC, 3A 1S GT5P-N1SAD24 3S — 6S GT5P-N6SAD24 10S GT5P-N10SAD24 24V AC/DC 30S — 60S GT5P-N60SAD24 3M — 6M GT5P-N6MAD24 10M GT5P-N10MAD24 1S — 3S — 6S — 10S GT5P-N10SD12 12V DC 30S GT5P-N30SD12 60S GT5P-N60SD12 3M — 6M — 10M GT5P-N10MD12 For sockets and accessories, see page 873. 800-262-IDEC (4332) • USA & Canada 871 GT5P Timers Timing Diagram/Schematic/Electrical Life Curves SPDT m n l o Operation Mode k p (-) (+) q j POWER Do not apply voltage to terminals 1, 3, and 4. Item Terminal Number Operation Set Time Power 2 - 7 (8p) 5 - 8 (8p) (NC) Delayed ON-Delay Contact 6 - 8 (8p) (NO) POWER Indicator OUT Electrical Life Curves www.IDEC.com 872 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers GT5P Timers Accessories Mounting Mounting Accessories and Sockets Applicable Hold-Down Springs Style Appearance Use with Timers Part No. Appearance Part No. 8-Pin Screw GT5P SR2P-05 Terminal (dual tier) SFA-203 8-Pin Fingersafe GT5P SR2P-05C Socket DIN Rail/ Surface Mounting Accessories 8-Pin Screw GT5P SR2P-06 SFA-202 Terminal DIN Mounting Rail — BNDN1000 Length 1000mm Part Numbers: Mounting Accessories and Sockets Applicable Hold-Down Springs Mounting 8-Pin Solder SR2P-51 SFA-402 Accessories Terminal Installation of Hold-Down Springs DIN Rail Mount Socket Panel Mount Socket Insert the springs into the outer Hold-down Spring slots with the projections SFA-402 facing inside. Insert the springs Insert into the slots. 8-pin Socket SR2P-51 Socket SR2P-05 Hold-down Spring (sold separately) SFA-203 (use two springs) Socket SR2P-06 Hold-down Spring (sold separately) SFA-202 (use two springs) 800-262-IDEC (4332) • USA & Canada 873 GT5P Timers Dimensions GT5P Timer, 8-Pin with SR2P-05 GT5P Timer, 8-Pin with SR2P-06 www.IDEC.com 874 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers GT5Y Timers GT5Y Series — ON Delay Timers Key features: GT5Y • 4PDT, 3A or DPDT, 5A contacts • 4 time ranges • Repeat error ±0.2% maximum • Control settings by hand or screwdriver • Power ON and timing out LED indicators • Uses the same sockets and hold-down clips as IDEC’s RY4S and RU series relays UL, c-UL Listed File No. E55996 Specifications GT5Y-2 GT5Y-4 100 to 120V AC (50/60Hz) 200 to 240V AC (50/60Hz) Rated Operating Voltage 24V DC 24V AC 12V DC Contact Form DPDT 4PDT 220V AC, 5A 220V AC, 3A Resistive Load 30V DC, 5A 30V DC, 3A Rated Load 220V AC, 2A 220V AC, 0.8A Inductive Load 30V DC, 2.5A 30V DC, 1.5A 1100VA AC 660VA AC Resistive Load 150W DC 90W DC Allowable Contact Power Inductive Load 440VA AC 176VA AC Cos ø = 0.3 75W DC 45W DC L/R = 7msec Allowable Voltage 250V AC, 125V DC Allowable Current 5A 3A Temperature Error ±3% maximum (over –10 to 50°C, reference temperature 20°C) Setting Error ±10% maximum When turning power off after time up: 0.1 second maximum Reset Time When turning power off before time up: 1 second maximum Insulation Resistance 100MΩ minimum Dielectric Strength 2,000V AC, 1 minute (except between contacts of the same pole) Vibration Resistance 100N (approximate 10G) Operating extremes: 100N (approximate 10G) Shock Resistance Damage limits: 500N (approximate 50G) 100V AC type: 1.5VA (at 50Hz) Power Consumption 200V AC type: 1.6VA (at 50Hz) 24V DC type: 0.9W 500,000 operations minimum 200,000 operations minimum Electrical Life (220V AC, 5A) (110V AC, 3A) Mechanical Life 50,000,000 operations minimum Operating Temperature –10 to +50°C Operating Humidity 45 to 85% RH 1. Minimum applicable load: GT5Y-2: 5V DC, 20mA (reference value); GT5Y-4: 5V DC, 10mA (reference value). 2. Inductive load: cos ø =0.3, L/R=7msec. 800-262-IDEC (4332) • USA & Canada 875 GT5Y Timers Part Numbering List Mode of Operation Contact Output Rated Voltage Time Range Complete Part No. 1S/10S/1M/10M GT5Y-2SN1A100 100 to 120V AC 3S/30S/3M/30M GT5Y-2SN3A100 6S/60S/6M/60M GT5Y-2SN6A100 1S/10S/1M/10M GT5Y-2SN1A200 200 to 240V AC 3S/30S/3M/30M GT5Y-2SN3A200 6S/60S/6M/60M GT5Y-2SN6A200 1S/10S/1M/10M GT5Y-2SN1D12 220V AC/ DPDT 12V DC 3S/30S/3M/30M GT5Y-2SN3D12 30V DC, 5A 6S/60S/6M/60M GT5Y-2SN6D12 1S/10S/1M/10M GT5Y-2SN1D24 24V DC 3S/30S/3M/30M GT5Y-2SN3D24 6S/60S/6M/60M GT5Y-2SN6D24 1S/10S/1M/10M GT5Y-2SN1A24 24V AC 3S/30S/3M/30M GT5Y-2SN3A24 6S/60S/6M/60M GT5Y-2SN6A24 ON-Delay 1S/10S/1M/10M GT5Y-4SN1A100 100 to 120V AC 3S/30S/3M/30M GT5Y-4SN3A100 6S/60S/6M/60M GT5Y-4SN6A100 1S/10S/1M/10M GT5Y-4SN1A200 200 to 240V AC 3S/30S/3M/30M GT5Y-4SN3A200 6S/60S/6M/60M GT5Y-4SN6A200 1S/10S/1M/10M — 4PDT 220V AC/30V DC, 3A 12V DC 3S/30S/3M/30M GT5Y-4SN3D12 6S/60S/6M/60M — 1S/10S/1M/10M GT5Y-4SN1D24 24V DC 3S/30S/3M/30M GT5Y-4SN3D24 6S/60S/6M/60M GT5Y-4SN6D24 1S/10S/1M/10M GT5Y-4SN1A24 24V AC 3S/30S/3M/30M GT5Y-4SN3A24 6S/60S/6M/60M GT5Y-4SN6A24 For sockets and accessories, see page 878. Timing Ranges Time Range Code Scale Time Range Indication 1S x 0.1 S 0.1 second to 1 second 10S x 1 S 0.2 second to 10 seconds 0 to 10 1M x 0.1 M 1.2 seconds to 1 minute 10M x 1 M 12 seconds to 10 minutes 3S x 1 S 0.1 second to 3 seconds 30S x 10 S 0.5 second to 30 seconds 0 to 3 3M x 1 M 3 seconds to 3 minutes 30M x 10 M 30 seconds to 30 minutes 6S x 1 S 0.1 second to 6 seconds 60S x 10 S 1 second to 60 seconds 0 to 6 6M x 1 M 6 seconds to 6 minutes 60M x 10 M 1 minute to 60 minutes www.IDEC.com 876 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers GT5Y Timers Timing Diagram/Schematics/Electrical Life Curves GT5Y-2 GT5Y-4 DPDT 4PDT Internal Connections (bottom view) Item Terminal Number Operation Set Time Power 13 - 14 1 - 9, 2 - 10 (NC) Delayed 3 - 11, 4 - 12 5 - 9, 6 - 10 Operation Mode: Contact (NO) 7 - 11, 8 - 12 ON-Delay POWER Indicator OUT For an explanation of timing modes, see page page 832. Electrical Life Curves 5000 AC Load GT5Y-2 GT5Y-4 1000 110V AC Resis. Load 500 220V AC Resis. Load 110V AC Induc. Load 220V AC Induc. Load 100 50 10 0 12345 Load Current (A) 5000 DC Load GT5Y-2 GT5Y-4 30V DC Resis. Load 1000 30V DC Induc. Load 500 100V DC Resis. Load 100V DC Induc. Load 100 50 10 0 1234 5 Load Current (A) 800-262-IDEC (4332) • USA & Canada 877 Life (× 10,000 operations) Life (× 10,000 operations) GT5Y Timers Accessories DIN Rail Mounting Accessories DIN Rail/Surface Mount Sockets and Hold-Down Springs DIN Rail Mount Socket Applicable Hold-Down Springs Style Appearance Part No. Appearance Part No. 14-Blade Screw Terminal SY4S-05 SFA-202 14-Blade Screw Terminal (fingersafe) SY4S-05C DIN Mounting Rail Length 1000mm BNDN1000 Panel Mounting Accessories Part Numbers: Panel Mount Socket and Hold-Down Springs Panel Mount Socket Applicable Hold-Down Springs Style Appearance Part No. Appearance Part No. 14-Blade Solder Terminal SY4S-51 SFA-302 PCB Mounting Accessories Part Numbers: PCB Mount Sockets with Applicable Hold-Down Springs PCB Mount Socket Applicable Hold-Down Springs Style Appearance Part No. Appearance Part No. 14 Blade, PCB Terminal SY4S-61 SFA-302 14 Blade, PCB Terminal SY4S-62 SY4S-02F1 www.IDEC.com 878 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers GT5Y Timers Dimensions GT5Y Timer, Blade with SY4S-05 When using 30 BAA/BAP: 28.5 When using DIN Rail 6 DIN Rail When using BAA/BAP: 87.6 maximum 18 M3 Terminal (BAA/BAP) Terminal Arrangement 83.6 maximum Screw 2-ø4.2 Mounting Holes 8 7 6 5 (or M4 Tapped Holes) 4 3 2 1 26 4 max. 4.8 min. Hold- DIN 14 13 21 6 52.6 6.4 down Rail 12 11 10 9 Spring 58.6 18.5 (Top View) 18.5 5.9 max. 25 26 25 ø3.2 min. 800-262-IDEC (4332) • USA & Canada 879 27.5 3 62 3 62 0.7 4.2 45 General Instructions Timers General Instructions for All Timer Series General Instructions Load Current Vibration and Shock With inductive, capacitive, and incandescent lamp loads, inrush current more Excessive vibration or shocks can cause the output contacts to bounce, the than 10 times the rated current may cause welded contacts and other undesired timer should be used only within the operating extremes for vibration and shock effects. The inrush current and steady-state current must be taken into consider- resistance. In applications with significant vibration or shock, use of hold down ation when specifying a timer. springs or clips is recommended to secure a timer to its socket. Contact Protection Time Setting Switching an inductive load generates a counter-electromotive force (back EMF) The time range is calibrated at its maximum time scale; so it is desirable to use in the coil. The back EMF will cause arcing, which may shorten the contact life the timer at a setting as close to its maximum time scale as possible. For a more and cause imperfect contact. Application of a protection circuit is recommended accurate time delay, adjust the control knob by measuring the operating time to safeguard the contacts. with a watch before application. Temperature and Humidity Input Contacts Use the timer within the operating temperature and operating humidity ranges Use mechanical contact switch or relay to supply power to the timer. When and prevent freezing or condensation. After the timer has been stored below driving the timer with a solid-state output device (such as a two-wire proximity its operating temperature, leave the timer at room temperature for a sufficient switch, photoelectric switch, or solid-state relay), malfunction may be caused by period of time to allow it to return to operating temperatures before use. leakage current from the solid-state device. Since AC types comprise a capaci- tive load, the SSR dielectric strength should be two or more times the power voltage when switching the timer power using an SSR. Environment Generally, it is desirable to use mechanical contacts whenever possible to apply Avoid contact between the timer and sulfurous or ammonia gases, organic sol- power to a timer or its signal inputs. When using solid state devices, be cautious vents (alcohol, benzine, thinner, etc.), strong alkaline substances, or strong acids. of inrushes and back-EMF that may exceed the ratings on such devices. Some Do not use the timer in an environment where such substances are prevalent. Do timers are specially designed so that signal inputs switch at a lower voltage not allow water to run or splash on the timer. than is used to power the timer (models designated as “B” type). Timing Accuracy Formulas Timing accuracies are calculated from the following formulas: = ± 1 x Maximum Measured Value – Minimum Measured Value x 100% Repeat Error 2 Maximum Scale Value = ± Tv - Tr x 100% Voltage Error Tr Tv: Average of measured values at voltage V Tr: Average of measured values at the rated voltage = ± Tt - T20 x 100% Temperature Error T20 Tt: Average of measured values at °C T20: Average of measured values at 20°C = ± Average of Measured Values - Set Value x 100% Setting Error Maximum Scale Value www.IDEC.com 880 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights