IDEC CORPORATION HA2L-A1C64-W

ş16mm H6 Series Miniature Control Units (06/11/30) ş16 H6 Series Miniature Control Units Series H6 Series Miniature Control Units Mounting Hole Size ş16 mm Type HA L HA1L- 3 HA P HA B-∗ ∗ ∗ ∗1 Separate Type Appearance Unibody Type Mushroom Illuminated Pilot Lights Flush Pushbuttons Illuminated Pushbuttons Unit Pushbuttons (Separate type, (Momentary, Maintained) (Momentary, Maintained) (Momentary, Maintained) Unibody type) Bezel Size ş24 ş24 24 24 ş24 24 24 (Operator Size) ş30mm Button Bezel Color Black Light Source LED lamp (IDEC’s LFTD Type) — Button Color: Lens/Button Color Lens Color: Amber, Blue, Green, Red, Yellow, White Black, Blue, Green, Red, Yellow, White Contact SPDT, DPDT SPDT, DPDT (gold-clad silver, silver) — ConŢguration (gold-clad silver, silver) Gold-clad silver contacts: Gold-clad silver contacts: 125V AC · 0.1A, Contact Rating 125V AC · 0.1A, 30V DC · 0.1A 30VDC · 0.1A — (resistive load) Silver contacts: 125V AC · 3A, 30V DC · 2A Silver contacts: 125V AC · 3A, 30VDC · 2A 100,000 operations Electrical 100,000 operations minimum — minimum Momentary: 1,000,000 operations Momentary: 1,000,000 operations minimum minimum Mechanical — Maintained: 200,000 operations minimum Maintained: 200,000 operations minimum Degree of Protection IP65 (IEC 60529) Solder/Tab terminal #110 Terminal Style PCB Terminal (gold contact only) Switch Guard Yes — — Yes Terminal Cover Yes Yes Yes Yes Mounting Hole Yes Plug • Separate contact block mount can be removed from the operator. Remarks • Large operators for easy operation; bezel size ş24mm or 24 × 24 mm • Shock- and vibration-resistant rugged design, waterproof and dust-tight Approvals See Page 679 11 Note: Specify a bezel code in place of in the Type No. (06/11/30) 2 Accessories Durability Contact H6 Series Miniature Control Units ş16 Series H6 Series Miniature Control Units Mounting Hole Size ş16 mm ∗ ∗ Type HA B-∗ ∗ ∗ ∗2 HA1B-∗ ∗3 HA1B-V2E HA1E-V2S Direct Opening Action Direct Opening Action Appearance Short Body Type Extended Pushbuttons Mushroom Pushbuttons Pushlock Turn Reset Pushlock Turn Reset Unit (Momentary, Maintained) (Momentary, Maintained) Emergency Stop Switch Emergency Stop Switch Bezel Size ş24 24 24 ş24 ş24.7 (Operator Size) ş24.9mm Button ş30mm Button Bezel Color Black Light Source — Button Color: Button Color: Button Color: Lens/Button Color Black, Blue, Green, Red, Yellow, White Red only Red only Contact SPDT, DPDT (gold-clad silver, silver) 1NC, 2NC (silver) 1NC, 2NC (silver) ConŢguration Gold-clad silver contacts: 125V AC · 0.1A, 30V DC · 0.1A 250V AC · 1.5A 250V AC · 1.5A Contact Ratings (resistive load) Silver contacts: 125VDC · 0.22A 125VDC · 0.22A 125V AC · 3A, 30V DC · 2A 100,000 operations 100,000 operations Electrical 100,000 operations minimum minimum minimum Momentary: 1,000,000 operations minimum 250,000 operations 250,000 operations Mechanical minimum minimum Maintained: 200,000 operations minimum Degree of Protection IP65 (IEC 60529) Solder/Tab terminal #110 Solder/Tab terminal #110 Solder Terminal Terminal Style PCB Terminal (gold contacts only) PCB Terminal PCB Terminal Terminal Cover Yes Yes Yes Mounting Hole Yes Yes Yes Plug • Separate contact block can be removed from the operator. • Direct opening action Remarks • Large operators for easy operation • Safety lock mechanism • Shock- and vibration-resistant rugged design, water- proof Approvals See Page 12 12 27 27 Note: Specify a bezel code in place of in the Type No. (06/11/30) 3 Accessory Durability Contact ş16 H6 Series Miniature Control Units Series H6 Series Miniature Control Units Mounting Hole Size ş16 mm Type HA1S / HA3S HA1K / HA3K HA1F / HA3F HA1R Appearance Illuminated Selector Selector Switches Key Selector Switches Switches 2-position maintained 2-position maintained Selector Pushbuttons 2-position maintained Unit 2-position spring-return 2-position spring-return 2-position 2-position spring-return 3-position maintained 3-position maintained 3-position 3-position maintained 3-position spring-return 3-position spring-return 3-position spring-return Bezel Size ş24 24 ş25 (Operator Size) Bezel Color Black LED lamp Light Source —— — (IDEC’s LFTD Type) Illumination Color: Button Color: Knob Color: Black Key Cylinder: Lens/Button Color Amber, Blue, Green, Red, Black, Blue, Green, Red, Color Insert: White Black (plastic) Yellow, White Yellow Contact SPDT, DPDT (gold-clad silver, silver) ConŢguration Gold-clad silver contacts: 125V AC · 0.1A, 30V DC · 0.1A Contact Ratings (resistive load) Silver contacts: 125V AC · 3A, 30V DC · 2A Electrical 100,000 operations minimum Mechanical 250,000 operations minimum Degree of Protection IP65 (IEC 60529) Solder/Tab terminal #110 Terminal Style PCB Terminal (gold contacts only) Terminal Cover Yes Mounting Hole Yes Plug • Separate contact block can be removed from the operator. Remarks • Large operators for easy operation; bezel size ş24mm or 24 × 24 mm • Shock- and vibration-resistant rugged design, waterproof Approvals See Page 14 16 and 17 19 and 20 22 (06/11/30) 4 Accessory Durability Contact ş16 H6 Series Miniature Control Units Designed to ensure ease of operation and safety Ideal for heavy duty applications such as machine tools • Separate contact block makes installation and removal easy. • Large operators; bezel size (ş24 mm, 24×24 mm) • High operating force and long stroke prevent inadvertent oper- ation. • Contact blocks can be removed when units are mounted col- lectively. • Shock- and vibration-resistant rugged design • IP65 • UL recognized, CSA certiŢed • EN compliant (EN 60947-1, EN 60947-5-1, TÜV approved) Emergency stop switches are DEMKO-approved. Contact Ratings SpeciŢcations Except for emergency stop switches (see page 27). Operating Temperature –25 to +55°C (no freezing) • Gold Contact Storage Temperature –30 to +80°C Operating Humidity 45 to 85% RH (no condensation) Rated Insulation Voltage 250V Contact Resistance 50 mΩ maximum (initial value) Rated Thermal Current 3A Insulation Resistance 100 MΩ minimum (500V DC megger) Rated Operating Voltage 125V AC 30V DC Between live part and ground: Rated Operating Current 0.1A 0.1A 2,500V, 1 minute (resistive load) Between terminals of different poles: Switch Unit Contact Material Gold-clad silver 2,500V, 1 minute Dielectric Between terminals of the same pole: Minimum applicable load (reference value): 5V AC/DC, 1 mA Strength 1,000V, 1 minute (Applicable range is subject to the operating condition and load.) Illumination Between live part and ground: • Silver Contact Unit 2,500V, 1 minute Rated Insulation Voltage 250V Operating extremes: Vibration Resistance 5 to 55 Hz, amplitude 0.5 mm Rated Thermal Current 5A 2 Operating extremes: 100 m/s (10G) Rated Operating Voltage 30V 125V 250V Shock Resistance 2 Damage limits: 1,000 m/s (100G) Resistive Load — 3A 2A AC Momentary: 1,000,000 50/60 Hz Rated Inductive Load — 2A 1.5A Maintained: 200,000 Operating Mechanical Durability Selector switch: 250,000 Resistive Load 2A 0.4A — Current DC Key selector switch: 250,000 (minimum operations) Inductive Load 1A 0.2A — Illuminated selector switch: 250,000 Contact Material Silver Selector pushbutton: 250,000 Momentary: 100,000 AC inductive load: PF = 0.6 to 0.7, DC inductive load: L/R = 7 ms maximum (at 1,800 operations/hour) Electrical Durability Maintained: 100,000 (minimum operations) Built-in LED Lamp Ratings (at 1,200 operations/hour) Selector switch: 100,000 Type No. LFTD-5➁ LFTD-1➁ LFTD-2➁ Degree of Protection IP65 (IEC 60529) Lamp Base SX6S/8×5.4 Solder/tab terminal #110 Terminal Style Operating PC board terminal 5V DC±5% 12V AC/DC ±10% 24V AC/DC ±10% Voltage HA1L-M1C24: 18g Rated Voltage 5V DC 12V AC/DC 24V AC/DC HA1P-1C04: 17g AC — 9 mA 9 mA HA1P-14: 13g Current Weight (approx.) HA1B-M1C2: 16g Draw DC 8 mA 8 mA 8 mA HA1S-2C2: 18g Specify a color code in place of ➁ in the Type No. HA1K-2C2A: 33g Color Code ➁ A (amber), G (green), R (red), S (blue), W (white), HA1F-2C24: 20g Y (yellow) Lamp Base Same as illumination color Color Voltage Marking Die stamped on the lamp base. Approx. 50,000 hours Life (When used on complete DC, luminance reduces to 50% (reference value) of the initial intensity.) A, R, W, Y A, R, W, Y (+) (–) Internal Circuit G, S G, S LED Chip (+) (–) Protection Diode Zener Diode (06/11/30) 5 ş16 H6 Series Miniature Control Units HA1L/HA2L Illuminated Pushbuttons Type No. Contact Operating ➁ Lens Color Style Operation Contact Solder/Tab Material Voltage Code PC Board Terminal Terminal Round SPDT HA1L-M1C11➁ HA1L-M1C11V➁ 5V DC HA1L ±5% DPDT HA1L-M1C21➁ HA1L-M1C21V➁ SPDT HA1L-M1C13➁ HA1L-M1C13V➁ 12V AC/DC Gold ±10% DPDT HA1L-M1C23➁ HA1L-M1C23V➁ SPDT HA1L-M1C14➁ HA1L-M1C14V➁ 24V AC/DC ±10% DPDT HA1L-M1C24➁ HA1L-M1C24V➁ Momentary SPDT HA1L-M1C51➁ 5V DC ±5% DPDT HA1L-M1C61➁ SPDT HA1L-M1C53➁ 12V AC/DC Silver — ±10% DPDT HA1L-M1C63➁ SPDT HA1L-M1C54➁ 24V AC/DC ±10% DPDT HA1L-M1C64➁ SPDT HA1L-A1C11➁ HA1L-A1C11V➁ 5V DC ±5% DPDT HA1L-A1C21➁ HA1L-A1C21V➁ SPDT HA1L-A1C13➁ HA1L-A1C13V➁ 12V AC/DC Gold ±10% DPDT HA1L-A1C23➁ HA1L-A1C23V➁ SPDT HA1L-A1C14➁ HA1L-A1C14V➁ 24V AC/DC ±10% DPDT HA1L-A1C24➁ HA1L-A1C24V➁ Maintained SPDT HA1L-A1C51➁ 5V DC ±5% DPDT HA1L-A1C61➁ SPDT HA1L-A1C53➁ 12V AC/DC Silver — ±10% DPDT HA1L-A1C63➁ A: amber SPDT HA1L-A1C54➁ 24V AC/DC G: green ±10% DPDT HA1L-A1C64➁ R: red S: blue Square SPDT HA2L-M1C11➁ HA2L-M1C11V➁ 5V DC W: white HA2L ±5% DPDT HA2L-M1C21➁ HA2L-M1C21V➁ Y: yellow SPDT HA2L-M1C13➁ HA2L-M1C13V➁ 12V AC/DC Gold ±10% DPDT HA2L-M1C23➁ HA2L-M1C23V➁ SPDT HA2L-M1C14➁ HA2L-M1C14V➁ 24V AC/DC ±10% DPDT HA2L-M1C24➁ HA2L-M1C24V➁ Momentary SPDT HA2L-M1C51➁ 5V DC ±5% DPDT HA2L-M1C61➁ SPDT HA2L-M1C53➁ 12V AC/DC Silver — ±10% DPDT HA2L-M1C63➁ SPDT HA2L-M1C54➁ 24V AC/DC ±10% DPDT HA2L-M1C64➁ SPDT HA2L-A1C11➁ HA2L-A1C11V➁ 5V DC ±5% DPDT HA2L-A1C21➁ HA2L-A1C21V➁ SPDT HA2L-A1C13➁ HA2L-A1C13V➁ 12V AC/DC Gold ±10% DPDT HA2L-A1C23➁ HA2L-A1C23V➁ SPDT HA2L-A1C14➁ HA2L-A1C14V➁ 24V AC/DC ±10% DPDT HA2L-A1C24➁ HA2L-A1C24V➁ Maintained SPDT HA2L-A1C51➁ 5V DC ±5% DPDT HA2L-A1C61➁ SPDT HA2L-A1C53➁ 12V AC/DC Silver — ±10% DPDT HA2L-A1C63➁ SPDT HA2L-A1C54➁ 24V AC/DC ±10% DPDT HA2L-A1C64➁ Note: Specify a lens color code in place of ➁ in the Type No. Package quantity: 1 (06/11/30) 6 H6 Series Miniature Control Units ş16 HA3L/HA4L/HA1L-M3/A3 LED Illuminated Pushbuttons Type No. Contact Operating ➁ Lens Color Style Operation Contact Solder/Tab PC Board Material Voltage Code Terminal Terminal Round w/Square Bezel SPDT HA3L-M1C11➁ HA3L-M1C11V➁ 5V DC HA3L ±5% DPDT HA3L-M1C21➁ HA3L-M1C21V➁ SPDT HA3L-M1C13 HA3L-M1C13V 12V AC/DC ➁ ➁ Gold ±10% DPDT HA3L-M1C23➁ HA3L-M1C23V➁ SPDT HA3L-M1C14 HA3L-M1C14V 24V AC/DC ➁ ➁ ±10% DPDT HA3L-M1C24➁ HA3L-M1C24V➁ Momentary 5V DC SPDT HA3L-M1C51➁ ±5% DPDT HA3L-M1C61 ➁ 12V AC/DC SPDT HA3L-M1C53➁ Silver — ±10% DPDT HA3L-M1C63 ➁ SPDT HA3L-M1C54➁ 24V AC/DC ±10% DPDT HA3L-M1C64➁ SPDT HA3L-A1C11 HA3L-A1C11V 5V DC ➁ ➁ ±5% DPDT HA3L-A1C21➁ HA3L-A1C21V➁ SPDT HA3L-A1C13 HA3L-A1C13V 12V AC/DC ➁ ➁ Gold ±10% DPDT HA3L-A1C23➁ HA3L-A1C23V➁ 24V AC/DC SPDT HA3L-A1C14➁ HA3L-A1C14V➁ ±10% DPDT HA3L-A1C24 HA3L-A1C24V ➁ ➁ Maintained 5V DC SPDT HA3L-A1C51➁ ±5% DPDT HA3L-A1C61 ➁ SPDT HA3L-A1C53➁ 12V AC/DC Silver — ±10% DPDT HA3L-A1C63➁ SPDT HA3L-A1C54 24V AC/DC ➁ ±10% DPDT HA3L-A1C64➁ Square w/Four-sided SPDT HA4L-M1C11 HA4L-M1C11V 5V DC ➁ ➁ Barrier HA4L ±5% DPDT HA4L-M1C21➁ HA4L-M1C21V➁ 12V AC/DC SPDT HA4L-M1C13➁ HA4L-M1C13V➁ Gold ±10% DPDT HA4L-M1C23 HA4L-M1C23V ➁ ➁ A: amber 24V AC/DC SPDT HA4L-M1C14➁ HA4L-M1C14V➁ G: green ±10% DPDT HA4L-M1C24 HA4L-M1C24V ➁ ➁ R: red Momentary S: blue SPDT HA4L-M1C51➁ 5V DC W: white ±5% DPDT HA4L-M1C61➁ Y: yellow SPDT HA4L-M1C53 12V AC/DC ➁ Silver — ±10% DPDT HA4L-M1C63➁ SPDT HA4L-M1C54 24V AC/DC ➁ ±10% DPDT HA4L-M1C64➁ ş30 Mushroom 5V DC SPDT HA1L-M3C11➁ HA1L-M3C11V➁ HA1L- 3 ±5% DPDT HA1L-M3C21 HA1L-M3C21V ➁ ➁ 12V AC/DC SPDT HA1L-M3C13➁ HA1L-M3C13V➁ Gold ±10% DPDT HA1L-M3C23 HA1L-M3C23V ➁ ➁ SPDT HA1L-M3C14➁ HA1L-M3C14V➁ 24V AC/DC ±10% DPDT HA1L-M3C24➁ HA1L-M3C24V➁ Momentary SPDT HA1L-M3C51 5V DC ➁ ±5% DPDT HA1L-M3C61➁ SPDT HA1L-M3C53 12V AC/DC ➁ Silver — ±10% DPDT HA1L-M3C63➁ 24V AC/DC SPDT HA1L-M3C54➁ ±10% DPDT HA1L-M3C64 ➁ 5V DC SPDT HA1L-A3C11➁ HA1L-A3C11V➁ ±5% DPDT HA1L-A3C21 HA1L-A3C21V ➁ ➁ SPDT HA1L-A3C13➁ HA1L-A3C13V➁ 12V AC/DC Gold ±10% DPDT HA1L-A3C23➁ HA1L-A3C23V➁ SPDT HA1L-A3C14 HA1L-A3C14V 24V AC/DC ➁ ➁ ±10% DPDT HA1L-A3C24➁ HA1L-A3C24V➁ Maintained SPDT HA1L-A3C51 5V DC ➁ ±5% DPDT HA1L-A3C61➁ 12V AC/DC SPDT HA1L-A3C53➁ Silver — ±10% DPDT HA1L-A3C63 ➁ 24V AC/DC SPDT HA1L-A3C54➁ ±10% DPDT HA1L-A3C64 ➁ Note: Specify a lens color code in place of ➁ in the Type No. Package quantity: 1 (06/11/30) 7 LOCK TOP R15.5 R15.5 LOCK CK LO ş16 H6 Series Miniature Control Units Dimensions (Illuminated Pushbuttons) • Round Panel Thickness 0.5 to 6 Rubber Gasket • Square 9 Right Contact Locking Ring • Round w/Square Bezel Anti-rotation Ring Left Contact 0.6 Round Square Round Square PC Board Terminal w/Square Bezel w/4-sided Barrier Width 0.8×0.5t Terminal Width 2.8×0.5t 2.6 2 10.5 13.5 17.8 9 3611 c 24 c 24 c 24 5.5 PC Board Terminal Type Solder/Tab Terminal Type • Mushroom Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring Anti-rotation Ring 0.6 Tab Terminal Width 2.8×0.5t 2.6 10.5 13.5 11 1 17.8 9 36 20 Mounting Hole Layout PC Board Drilling Layout Terminal Arrangement Mounting Centers (Bottom View) (Bottom View) (TOP) • Round (TOP) • Square 6.4 Lamp Terminal (+) 6.8 1.45 • Round w/Square Bezel +0.2 ş16.2 0 Lamp Terminal (–) • SPDT has C, NO, and NC on the right only. • X2 and X2 are wired internally. 24 min. • Mushroom +0.2 ş16.2 0 Note: Determine mounting centers to ensure easy operation. 35 min. All dimensions in mm. (06/11/30) 8 ş1.2 holes ø24 2-R0.6 ş30 ¯21 15.8 35 min. 24 min. ş21 15.8 5 5 6.8 6.4 X2 X2 X1 1 1.45 CNO NC CNO NC 6 6 1.2 1.2 6.8 6.4 1 6 6 6.8 6.4 1.45 1 1.45 1 5 5 X2 X2 X1 C NO NC C NO NC H6 Series Miniature Control Units ş16 HA1P/HA2P/HA3P/HA4P LED Illuminated Pilot Lights Separate Type Type No. Shape Operating Voltage ➁ Lens Color Code Solder/Tab Terminal PC Board Terminal Round 5V DC ±5% HA1P-1C01➁ HA1P-1C01V➁ HA1P 12V AC/DC ±10% HA1P-1C03➁ HA1P-1C03V➁ 24V AC/DC ±10% HA1P-1C04➁ HA1P-1C04V➁ Square 5V DC ±5% HA2P-1C01➁ HA2P-1C01V➁ HA2P 12V AC/DC ±10% HA2P-1C03➁ HA2P-1C03V➁ Specify a color code in place of ➁ in the Type No. A: amber 24V AC/DC ±10% HA2P-1C04➁ HA2P-1C04V➁ G: green R: red Round w/Square Bezel 5V DC ±5% HA3P-1C01➁ HA3P-1C01V➁ S: blue HA3P W: white Y: yellow 12V AC/DC ±10% HA3P-1C03➁ HA3P-1C03V➁ 24V AC/DC ±10% HA3P-1C04➁ HA3P-1C04V➁ Square w/Four-sided Barrier 5V DC ±5% HA4P-1C01➁ HA4P-1C01V➁ HA4P 12V AC/DC ±10% HA4P-1C03➁ HA4P-1C03V➁ 24V AC/DC ±10% HA4P-1C04➁ HA4P-1C04V➁ • See page 10 for dimensions. Unibody Type Type No. Shape Operating Voltage ➁ Lens Color Code Solder/Tab Terminal PC Board Terminal Round 5V DC ±5% HA1P-11➁ — HA1P 12V AC/DC ±10% HA1P-13➁ — 24V AC/DC ±10% HA1P-14➁ — Square 5V DC ±5% HA2P-11➁ — HA2P 12V AC/DC ±10% HA2P-13➁ — Specify a color code in place of ➁ in the Type No. A: amber 24V AC/DC ±10% HA2P-14➁ — G: green R: red Round w/Square Bezel 5V DC ±5% HA3P-11➁ — S: blue HA3P W: white Y: yellow 12V AC/DC ±10% HA3P-13➁ — 24V AC/DC ±10% HA3P-14➁ — Square w/Four-sided Barrier 5V DC ±5% HA4P-11➁ — HA4P 12V AC/DC ±10% HA4P-13➁ — 24V AC/DC ±10% HA4P-14➁ — • See page 10 for dimensions. (06/11/30) 9 LOCK TP O T OP R15.5 LOCK ş16 H6 Series Miniature Control Units Dimensions (Pilot Lights) • Separate Type Panel Thickness 0.5 to 6 Rubber Gasket 9 Locking Ring Anti-rotation Ring 0.6 PC Board Terminal Width 0.8×0.5t Round Square Round Square Terminal Width 2.8×0.5t w/Square Bezel w/4-sided Barrier 2.6 2 2 10.5 13.5 17.8 936 11 5.5 24 24 24 PC Board Terminal Type Solder/Tab Terminal Type • Unibody Type Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring Anti-rotation Ring 0.6 Round Square Round Square Terminal Width 2.8×0.5t w/Square Bezel w/Four-sided barrier 2.6 13 Round 23 24 24 24 10 27.5 11 Solder/Tab Terminal Type Mounting Hole Layout PC Board Drilling Layout Terminal Arrangement Mounting Centers (Bottom View) (Bottom View) PC Board Terminal Type Separate Type Unibody Type +0.2 ş16.2 0 (TOP) Lamp Teminal (+) (TOP) (TOP) 7.85 Lamp Teminal (+) X1 Lamp Terminal (–) Lamp Terminal (–) 24 min. • X2 and X2 are connected internally. All dimensions in mm. (06/11/30) 10 ş1.2 holes ş24 ş24 ş21 15.8 24 min. X2 X2 X1 COM C NO NC COM CNO NC 5 5 7.85 1.2 1 6 1.2 6 6 7.85 1 1 5 5 X2 X2 X1 X2 X2 H6 Series Miniature Control Units ş16 HA1B/HA2B/HA3B/HA4B Pushbuttons Type No. Button Operation Shape Contact Color Code ➀➁ Type Type Solder/Tab Terminal PC Board Terminal Round SPDT HA1B-M1C1➀ HA1B-M1C1V➀ Gold HA1B- 1 DPDT HA1B-M1C2➀ HA1B-M1C2V➀ Momentary B: black SPDT HA1B-M1C5➀ — G: green Silver DPDT HA1B-M1C6➀ — R: red Button S: blue SPDT HA1B-A1C1➀ HA1B-A1C1V➀ Gold W: white DPDT HA1B-A1C2➀ HA1B-A1C2V➀ Y: yellow Maintained SPDT HA1B-A1C5➀ — Silver DPDT HA1B-A1C6➀ — SPDT HA1B-M1C1L➁ HA1B-M1C1VL➁ Gold DPDT HA1B-M1C2L➁ HA1B-M1C2VL➁ Momentary A: amber SPDT HA1B-M1C5L➁ — G: green Silver DPDT HA1B-M1C6L➁ — Illumination R: red Lens S: blue SPDT HA1B-A1C1L➁ HA1B-A1C1VL➁ Gold W: white DPDT HA1B-A1C2L➁ HA1B-A1C2VL➁ Y: yellow Maintained SPDT HA1B-A1C5L➁ — Silver DPDT HA1B-A1C6L➁ — Square SPDT HA2B-M1C1➀ HA2B-M1C1V➀ Gold HA2B- 1 DPDT HA2B-M1C2➀ HA2B-M1C2V➀ Momentary B: black SPDT HA2B-M1C5➀ — G: green Silver DPDT HA2B-M1C6➀ — R: red Button S: blue SPDT HA2B-A1C1➀ HA2B-A1C1V➀ Gold W: white DPDT HA2B-A1C2➀ HA2B-A1C2V➀ Y: yellow Maintained SPDT HA2B-A1C5➀ — Silver DPDT HA2B-A1C6➀ — SPDT HA2B-M1C1L➁ HA2B-M1C1VL➁ Gold DPDT HA2B-M1C2L➁ HA2B-M1C2VL➁ Momentary A: amber SPDT HA2B-M1C5L➁ — G: green Silver DPDT HA2B-M1C6L➁ — Illumination R: red Lens S: blue SPDT HA2B-A1C1L➁ HA2B-A1C1VL➁ Gold W: white DPDT HA2B-A1C2L➁ HA2B-A1C2VL➁ Y: yellow Maintained SPDT HA2B-A1C5L➁ — Silver DPDT HA2B-A1C6L➁ — Round w/Square Bezel SPDT HA3B-M1C1➀ HA3B-M1C1V➀ Gold HA3B- 1 DPDT HA3B-M1C2➀ HA3B-M1C2V➀ Momentary B: black SPDT HA3B-M1C5➀ — G: green Silver DPDT HA3B-M1C6➀ — R: red Button S: blue SPDT HA3B-A1C1➀ HA3B-A1C1V➀ Gold W: white DPDT HA3B-A1C2➀ HA3B-A1C2V➀ Y: yellow Maintained SPDT HA3B-A1C5➀ — Silver DPDT HA3B-A1C6➀ — SPDT HA3B-M1C1L➁ HA3B-M1C1VL➁ Gold DPDT HA3B-M1C2L➁ HA3B-M1C2VL➁ Momentary A: amber SPDT HA3B-M1C5L➁ — G: green Silver DPDT HA3B-M1C6L➁ — Illumination R: red Lens S: blue SPDT HA3B-A1C1L➁ HA3B-A1C1VL➁ Gold W: white DPDT HA3B-A1C2L➁ HA3B-A1C2VL➁ Y: yellow Maintained SPDT HA3B-A1C5L➁ — Silver DPDT HA3B-A1C6L➁ — Square B: black SPDT HA4B-M1C1➀ HA4B-M1C1V➀ Gold w/Four-sided Barrier G: green DPDT HA4B-M1C2➀ HA4B-M1C2V➀ R: red HA4B-M1 Button Momentary S: blue SPDT HA4B-M1C5➀ — W: white Silver DPDT HA4B-M1C6➀ — Y: yellow A: amber SPDT HA4B-M1C1L➁ HA4B-M1C1VL➁ Gold G: green DPDT HA4B-M1C2L➁ HA4B-M1C2VL➁ Illumination R: red Maintained Lens S: blue SPDT HA4B-M1C5L➁ — W: white Silver DPDT HA4B-M1C6L➁ — Y: yellow • Specify a color code in place of ➀ or ➁ in the Type No. • For dimensions, see page 13. (06/11/30) 11 Flush ş16 H6 Series Miniature Control Units HA1B/HA2B/HA3B/HA4B Pushbuttons Type No. Button Operation Shape Contact Color Code ➀ Type Type Solder/Tab Terminal PC Board Terminal Round SPDT HA1B-M2C1➀ HA1B-M2C1V➀ Gold HA1B- 2 DPDT HA1B-M2C2➀ HA1B-M2C2V➀ Momentary SPDT HA1B-M2C5➀ — Silver DPDT HA1B-M2C6➀ — SPDT HA1B-A2C1➀ HA1B-A2C1V➀ Gold DPDT HA1B-A2C2➀ HA1B-A2C2V➀ Maintained SPDT HA1B-A2C5➀ — Silver DPDT HA1B-A2C6➀ — Square SPDT HA2B-M2C1➀ HA2B-M2C1V➀ Gold HA2B- 2 DPDT HA2B-M2C2➀ HA2B-M2C2V➀ Momentary SPDT HA2B-M2C5➀ — Silver DPDT HA2B-M2C6➀ — SPDT HA2B-A2C1➀ HA2B-A2C1V➀ Gold DPDT HA2B-A2C2➀ HA2B-A2C2V➀ Maintained SPDT HA2B-A2C5➀ — Silver DPDT HA2B-A2C6➀ — Round w/Square Bezel SPDT HA3B-M2C1➀ HA3B-M2C1V➀ Gold HA3B- 2 DPDT HA3B-M2C2➀ HA3B-M2C2V➀ Momentary B: black SPDT HA3B-M2C5➀ — Silver G: green DPDT HA3B-M2C6➀ — R: red Button S: blue SPDT HA3B-A2C1➀ HA3B-A2C1V➀ Gold W: white DPDT HA3B-A2C2➀ HA3B-A2C2V➀ Y: yellow Maintained SPDT HA3B-A2C5➀ — Silver DPDT HA3B-A2C6➀ — Square SPDT HA4B-M2C1➀ HA4B-M2C1V➀ w/Four-sided Barrier HA4B-M2 Gold DPDT HA4B-M2C2➀ HA4B-M2C2V➀ Momentary SPDT HA4B-M2C5➀ — Silver DPDT HA4B-M2C6➀ — Round SPDT HA1B-M3C1➀ HA1B-M3C1V➀ Gold HA1B- 3 DPDT HA1B-M3C2➀ HA1B-M3C2V➀ Momentary SPDT HA1B-M3C5➀ — Silver DPDT HA1B-M3C6➀ — SPDT HA1B-A3C1➀ HA1B-A3C1V➀ Gold DPDT HA1B-A3C2➀ HA1B-A3C2V➀ Maintained SPDT HA1B-A3C5➀ — Silver DPDT HA1B-A3C6➀ — • Specify a color code in place of ➀ in the Type No. • For dimensions, see page 13. (06/11/30) 12 ş30mm Mushroom Extended LOCK TP O R15.5 LOCK H6 Series Miniature Control Units ş16 Dimensions (Pushbuttons) Panel Thickness 0.5 to 6 Rubber Gasket 9 Locking Ring Anti-rotarion Ring 0.6 PC Board Terminal Width 0.8×0.5t Terminal Width 2.8×0.5t Round Square Round Square w/Square Bezel w/4-sided Barrier 2.6 10.5 13.5 2 17.8 5.5 9 36 11 24 24 24 PC Board Terminal Type Solder/Tab Terminal Type Extended 11 15.1 ş30mm Mushroom 11 20 Mounting Hole Layout PC Board Drilling Layout Terminal Arrangement Mounting Centers (Bottom View) (Bottom View) PC Board Terminal Type (TOP) +0.2 ş16.2 0 (TOP) 6.8 1.45 24 min∗ • SPDT has C, NO, and NC on the right only. ∗ 35 min. for mushroom type Note: Determine mounting centers to ensure easy operation. All dimensions in mm. (06/11/30) 13 ş1.2 holes ş30 ş24 ş21 15.8 24 min.∗ CNO NC CNO NC 5 5 6.8 1 1.45 1.2 6 6 6.8 1 1.45 1 5 5 20 C NO NC C NO NC ş16 H6 Series Miniature Control Units HA1S/HA3S Selector Switches Type No. Operation Shape Operator Position Contact Solder/Tab PC Board Type Terminal Terminal Round SPDT HA1S-2C1 HA1S-2C1V Gold HA1S DPDT HA1S-2C2 HA1S-2C2V LR Maintained SPDT HA1S-2C5 — Silver DPDT HA1S-2C6 — 90° 2-position SPDT HA1S-21C1 HA1S-21C1V Gold DPDT HA1S-21C2 HA1S-21C2V Spring return LR from right SPDT HA1S-21C5 — Silver DPDT HA1S-21C6 — Gold DPDT HA1S-3C2 HA1S-3C2V C L R Maintained Silver DPDT HA1S-3C6 — C Gold DPDT HA1S-31C2 HA1S-31C2V Spring return L R from right Silver DPDT HA1S-31C6 — 45° 3-position C Gold DPDT HA1S-32C2 HA1S-32C2V Spring return L R from left Silver DPDT HA1S-32C6 — C Gold DPDT HA1S-33C2 HA1S-33C2V Spring return L R two-way Silver DPDT HA1S-33C6 — Round w/Square Bezel SPDT HA3S-2C1 HA3S-2C1V Gold HA3S DPDT HA3S-2C2 HA3S-2C2V LR Maintained SPDT HA3S-2C5 — Silver DPDT HA3S-2C6 — 90° 2-position SPDT HA3S-21C1 HA3S-21C1V Gold DPDT HA3S-21C2 HA3S-21C2V LR Spring return from right SPDT HA3S-21C5 — Silver DPDT HA3S-21C6 — C Gold DPDT HA3S-3C2 HA3S-3C2V L R Maintained Silver DPDT HA3S-3C6 — C Gold DPDT HA3S-31C2 HA3S-31C2V Spring return L R from right Silver DPDT HA3S-31C6 — 45° 3-position C Gold DPDT HA3S-32C2 HA3S-32C2V Spring return L R from left Silver DPDT HA3S-32C6 — C Gold DPDT HA3S-33C2 HA3S-33C2V Spring return L R two-way Silver DPDT HA3S-33C6 — • Bezel: black • Knob: black with white indicator • See page 15 for dimensions. Contact Operation Operator Position & Contact Operation (Top View) Positions Contact Left Center Right NO NC NO NC SPDT — C C LR LR 90° 2-position Left Contact Right Contact Left Contact Right Contact NO NC NO NC NO NC NO NC Maintained Spring return from right DPDT — C C C C C C C C Left Contact Right Contact Left Contact Right Contact Left Contact Right Contact L R L R L R L R NO NC NO NC NO NC NO NC NO NC NO NC 45° 3-position DPDT Maintained Spring return Spring return Spring return C C C C from right from left two-way C C (06/11/30) 14 LOCK TOP R15.5 LOCK H6 Series Miniature Control Units ş16 Dimensions (Selector Switch) Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring Right Contact 0.6 Anti-rotation Ring Left Contact PC Board Terminal Width 0.8×0.5t Terminal Width 2.8×0.5t Round Round w/Square Bezel 2.6 2 10.5 13.5 11 17.8 5.5 9 36 19.5 24 PC Board Terminal Type Solder/Tab Terminal Type Mounting Hole Layout PC Board Drilling Layout Terminal Arrangement Mounting Centers (Bottom View) (Bottom View) +0.2 ş16.2 0 (TOP) (TOP) 6.8 1.45 24 min. • SPDT has C, NO, and NC on the right only. Note: Determine mounting centers to ensure easy operation. All dimensions in mm. (06/11/30) 15 ş1.2 holes ş24 24 min. ş21 15.8 CNO NC CNO NC 5 5 6.8 1 1.45 6 6 6.8 1 1.45 1.2 1 5 5 C NO NC C NO NC ş16 H6 Series Miniature Control Units HA1K Key Selector Switches Type No. Keys Retained Shape Operator Position Contact at � � � � Solder/Tab Terminal PC Board Terminal SPDT HA1K-2C1A HA1K-2C1VA Round Gold HA1K DPDT HA1K-2C2A HA1K-2C2VA LR A SPDT HA1K-2C5A — Silver DPDT HA1K-2C6A — SPDT HA1K-2C1B HA1K-2C1VB Gold L R DPDT HA1K-2C2B HA1K-2C2VB Maintained B SPDT HA1K-2C5B — Silver DPDT HA1K-2C6B — 90° 2-position SPDT HA1K-2C1C HA1K-2C1VC Gold DPDT HA1K-2C2C HA1K-2C2VC L R C SPDT HA1K-2C5C — Silver DPDT HA1K-2C6C — Gold SPDT HA1K-21C1B HA1K-21C1VB L R Silver DPDT HA1K-21C2B HA1K-21C2VB Spring return B from right Gold SPDT HA1K-21C5B — Silver DPDT HA1K-21C6B — C Gold DPDT HA1K-3C2A HA1K-3C2VA L R A Silver DPDT HA1K-3C6A — C Gold DPDT HA1K-3C2B HA1K-3C2VB L R B Silver DPDT HA1K-3C6B — C Gold DPDT HA1K-3C2C HA1K-3C2VC L R C Silver DPDT HA1K-3C6C — C Gold DPDT HA1K-3C2D HA1K-3C2VD L R Maintained D Silver DPDT HA1K-3C6D — C Gold DPDT HA1K-3C2E HA1K-3C2VE LR E Silver DPDT HA1K-3C6E — C Gold DPDT HA1K-3C2G HA1K-3C2VG L R G Silver DPDT HA1K-3C6G — C Gold DPDT HA1K-3C2H HA1K-3C2VH L R H Silver DPDT HA1K-3C6H — 45° 3-position C Gold DPDT HA1K-31C2B HA1K-31C2VB L R B Silver DPDT HA1K-31C6B — C Gold DPDT HA1K-31C2D HA1K-31C2VD Spring return L R D from right Silver DPDT HA1K-31C6D — C Gold DPDT HA1K-31C2G HA1K-31C2VG L R G Silver DPDT HA1K-31C6G — C Gold DPDT HA1K-32C2C HA1K-32C2VC L R C Silver DPDT HA1K-32C6C — C Gold DPDT HA1K-32C2D HA1K-32C2VD Spring return L R D from left Silver DPDT HA1K-32C6D — C Gold DPDT HA1K-32C2H HA1K-32C2VH R L H Silver DPDT HA1K-32C6H — C Gold DPDT HA1K-33C2D HA1K-33C2VD Spring return L R D two-way Silver DPDT HA1K-33C6D — • Two keys are supplied. • The front of key cylinder is made of black plastic. • See page 18 for dimensions. Contact Operation Operator Position & Contact Operation (Top View) Positions Contact Left Center Right NO NC NO NC SPDT — C C LR LR 90° 2-position Left Contact Right Contact Left Contact Right Contact NO NC NO NC NO NC NO NC Maintained Spring return from right DPDT — C C C C C C C C Left Contact Right Contact Left Contact Right Contact Left Contact Right Contact L R L R L R L R NO NC NO NC NO NC NO NC NO NC NO NC 45° 3-position DPDT Maintained Spring return Spring return Spring return from right from left two-way C C C C C C (06/11/30) 16 H6 Series Miniature Control Units ş16 HA3K Key Selector Switches Type No. Keys Retained Shape Operator Position Contact at � � � � Solder/Tab Terminal PC Board Terminal SPDT HA3K-2C1A HA3K-2C1VA Round w/Square Bezel Gold HA3K DPDT HA3K-2C2A HA3K-2C2VA LR A SPDT HA3K-2C5A — Silver DPDT HA3K-2C6A — SPDT HA3K-2C1B HA3K-2C1VB Gold DPDT HA3K-2C2B HA3K-2C2VB L R Maintained B SPDT HA3K-2C5B — Silver DPDT HA3K-2C6B — 90° 2-position SPDT HA3K-2C1C HA3K-2C1VC Gold DPDT HA3K-2C2C HA3K-2C2VC L R C SPDT HA3K-2C5C — Silver DPDT HA3K-2C6C — Gold SPDT HA3K-21C1B HA3K-21C1VB L R Silver DPDT HA3K-21C2B HA3K-21C2VB Spring return B from right Gold SPDT HA3K-21C5B — Silver DPDT HA3K-21C6B — C Gold DPDT HA3K-3C2A HA3K-3C2VA L R A Silver DPDT HA3K-3C6A — C Gold DPDT HA3K-3C2B HA3K-3C2VB L R B Silver DPDT HA3K-3C6B — C Gold DPDT HA3K-3C2C HA3K-3C2VC L R C Silver DPDT HA3K-3C6C — C Gold DPDT HA3K-3C2D HA3K-3C2VD L R Maintained D Silver DPDT HA3K-3C6D — C Gold DPDT HA3K-3C2E HA3K-3C2VE LR E Silver DPDT HA3K-3C6E — C Gold DPDT HA3K-3C2G HA3K-3C2VG L R G Silver DPDT HA3K-3C6G — C Gold DPDT HA3K-3C2H HA3K-3C2VH L R H Silver DPDT HA3K-3C6H — 45° 3-position C Gold DPDT HA3K-31C2B HA3K-31C2VB L R B Silver DPDT HA3K-31C6B — C Gold DPDT HA3K-31C2D HA3K-31C2VD Spring return L R D from right Silver DPDT HA3K-31C6D — C Gold DPDT HA3K-31C2G HA3K-31C2VG L R G Silver DPDT HA3K-31C6G — C Gold DPDT HA3K-32C2C HA3K-32C2VC L R C Silver DPDT HA3K-32C6C — C Gold DPDT HA3K-32C2D HA3K-32C2VD Spring return L R D from left Silver DPDT HA3K-32C6D — C Gold DPDT HA3K-32C2H HA3K-32C2VH R L H Silver DPDT HA3K-32C6H — C Gold DPDT HA3K-33C2D HA3K-33C2VD Spring return L R D two-way Silver DPDT HA3K-33C6D — • Two keys are supplied. • The front of key cylinder is made with black plastic. • See page 18 for dimensions. Contact Operation Operator Position & Contact Operation (Top View) Positions Contact Left Center Right NO NC NO NC SPDT — C C LR LR 90° 2-position Left Contact Right Contact Left Contact Right Contact NO NC NO NC NO NC NO NC Maintained Spring return from right DPDT — C C C C C C C C Left Contact Right Contact Left Contact Right Contact Left Contact Right Contact L R L R L R L R NO NC NO NC NO NC NO NC NO NC NO NC 45° 3-position DPDT Maintained Spring return Spring return Spring return C C C C C C from right from left two-way (06/11/30) 17 LOCK TOP R15.5 LOCK ş16 H6 Series Miniature Control Units Dimensions (Key Selector Switch) Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring Right Contact 0.6 Anti-rotation Ring Left Contact PC Board Terminal Width 0.8×0.5t Terminal Width 2.8×0.5t Round Round w/Square Bezel 2.6 2 10.5 13.5 12.5 17.8 936 39 24 5.5 PC Board Terminal Type Solder/Tab Terminal Type Mounting Hole Layout PC Board Drilling Layout Terminal Arrangement Mounting Centers (Bottom View) (Bottom View) +0.2 (TOP) (TOP) ş16.2 0 6.8 1.45 24 min. • SPDT has C, NO, and NC on the right only. Note: Determine mounting centers to ensure easy operation. All dimensions in mm. (06/11/30) 18 ş1.2 holes ş24 24 min. ş21 15.8 CNO NC CNO NC 5 5 6.8 1 1.45 6 6 6.8 1 1.45 1.2 1 5 5 C NO NC C NO NC H6 Series Miniature Control Units ş16 HA1F LED Illuminated Selector Switches Type No. Operator Contact Operating Shape Contact Color Code ➁ Position Material Voltage Solder/Tab Terminal PC Board Terminal SPDT HA1F-2C11➁ HA1F-2C11V➁ Round 5V DC ±5% HA1F DPDT HA1F-2C21➁ HA1F-2C21V➁ ➁ ➁ SPDT HA1F-2C13 HA1F-2C13V Gold 12V AC/DC ±10% DPDT HA1F-2C23➁ HA1F-2C23V➁ Maintained SPDT HA1F-2C14➁ HA1F-2C14V➁ 24V AC/DC ±10% ➁ ➁ DPDT HA1F-2C24 HA1F-2C24V LR SPDT HA1F-2C51➁ 5V DC ±5% DPDT HA1F-2C61➁ SPDT HA1F-2C53➁ Silver 12V AC/DC ±10% — ➁ DPDT HA1F-2C63 SPDT HA1F-2C54➁ 24V AC/DC ±10% DPDT HA1F-2C64➁ ➁ ➁ SPDT HA1F-21C11 HA1F-21C11V 5V DC ±5% DPDT HA1F-21C21➁ HA1F-21C21V➁ SPDT HA1F-21C13➁ HA1F-21C13V➁ Gold 12V AC/DC ±10% ➁ ➁ DPDT HA1F-21C23 HA1F-21C23V Spring return from right SPDT HA1F-21C14➁ HA1F-21C14V➁ 24V AC/DC ±10% DPDT HA1F-21C24➁ HA1F-21C24V➁ LR SPDT HA1F-21C51➁ 5V DC ±5% ➁ DPDT HA1F-21C61 SPDT HA1F-21C53➁ Specify a lens color Silver 12V AC/DC ±10% — code in place of ➁ in DPDT HA1F-21C63➁ the Type No. ➁ SPDT HA1F-21C54 24V AC/DC ±10% DPDT HA1F-21C64➁ A: amber G: green 5V DC ±5% DPDT HA1F-3C21➁ HA1F-3C21V➁ R: red ➁ ➁ Maintained Gold 12V AC/DC ±10% DPDT HA1F-3C23 HA1F-3C23V S: blue 24V AC/DC ±10% DPDT HA1F-3C24➁ HA1F-3C24V➁ W: white C L R Y: yellow 5V DC ±5% DPDT HA1F-3C61➁ Silver 12V AC/DC ±10% DPDT HA1F-3C63➁ — ➁ 24V AC/DC ±10% DPDT HA1F-3C64 5V DC ±5% DPDT HA1F-31C21➁ HA1F-31C21V➁ Spring return Gold 12V AC/DC ±10% DPDT HA1F-31C23➁ HA1F-31C23V➁ from right ➁ ➁ 24V AC/DC ±10% DPDT HA1F-31C24 HA1F-31C24V C L R 5V DC ±5% DPDT HA1F-31C61➁ Silver 12V AC/DC ±10% DPDT HA1F-31C63➁ — ➁ 24V AC/DC ±10% DPDT HA1F-31C64 ➁ ➁ 5V DC ±5% DPDT HA1F-32C21 HA1F-32C21V Spring return Gold 12V AC/DC ±10% DPDT HA1F-32C23➁ HA1F-32C23V➁ from left 24V AC/DC ±10% DPDT HA1F-32C24➁ HA1F-32C24V➁ C ➁ 5V DC ±5% DPDT HA1F-32C61 L R Silver 12V AC/DC ±10% DPDT HA1F-32C63➁ — 24V AC/DC ±10% DPDT HA1F-32C64➁ ➁ ➁ 5V DC ±5% DPDT HA1F-33C21 HA1F-33C21V Spring return Gold 12V AC/DC ±10% DPDT HA1F-33C23➁ HA1F-33C23V➁ two-way 24V AC/DC ±10% DPDT HA1F-33C24➁ HA1F-33C24V➁ C L R 5V DC ±5% DPDT HA1F-33C61➁ ➁ Silver 12V AC/DC ±10% DPDT HA1F-33C63 — 24V AC/DC ±10% DPDT HA1F-33C64➁ • See page 21 for dimensions. Contact Operation Operator Position & Contact Operation (Top View) Positions Contact Left Center Right NO NC NO NC SPDT — C C LR LR 90° 2-position Left Contact Right Contact Left Contact Right Contact NO NC NO NC NO NC NO NC Maintained Spring return from right DPDT — C C C C C C C C Left Contact Right Contact Left Contact Right Contact Left Contact Right Contact L R L L R L R R NO NC NO NC NO NC NO NC NO NC NO NC 45° 3-position DPDT Maintained Spring return Spring return Spring return from right from left two-way C C C C C C (06/11/30) 19 45° 3-position 90° 2-position ş16 H6 Series Miniature Control Units HA3F LED Illuminated Selector Switches Type No. Operator Contact Operating Shape Contact Color Code ➁ Position Material Voltage Solder/Tab Terminal PC Board Terminal SPDT HA3F-2C11➁ HA3F-2C11V➁ Round 5V DC ±5% w/Square Bezel DPDT HA3F-2C21➁ HA3F-2C21V➁ HA3F ➁ ➁ SPDT HA3F-2C13 HA3F-2C13V Gold 12V AC/DC ±10% DPDT HA3F-2C23➁ HA3F-2C23V➁ Maintained SPDT HA3F-2C14➁ HA3F-2C14V➁ 24V AC/DC ±10% ➁ ➁ DPDT HA3F-2C24 HA3F-2C24V LR SPDT HA3F-2C51➁ 5V DC ±5% DPDT HA3F-2C61➁ SPDT HA3F-2C53➁ Silver 12V AC/DC ±10% — ➁ DPDT HA3F-2C63 SPDT HA3F-2C54➁ 24V AC/DC ±10% DPDT HA3F-2C64➁ ➁ ➁ SPDT HA3F-21C11 HA3F-21C11V 5V DC ±5% DPDT HA3F-21C21➁ HA3F-21C21V➁ SPDT HA3F-21C13➁ HA3F-21C13V➁ Gold 12V AC/DC ±10% ➁ ➁ DPDT HA3F-21C23 HA3F-21C23V Spring return SPDT HA3F-21C14➁ HA3F-21C14V➁ from right 24V AC/DC ±10% DPDT HA3F-21C24➁ HA3F-21C24V➁ LR SPDT HA3F-21C51➁ 5V DC ±5% ➁ DPDT HA3F-21C61 SPDT HA3F-21C53➁ Specify a lens color Silver 12V AC/DC ±10% — code in place of ➁ in DPDT HA3F-21C63➁ the Type No. ➁ SPDT HA3F-21C54 24V AC/DC ±10% DPDT HA3F-21C64➁ A: amber G: green 5V DC ±5% DPDT HA3F-3C21➁ HA3F-3C21V➁ R: red ➁ ➁ Gold 12V AC/DC ±10% DPDT HA3F-3C23 HA3F-3C23V Maintained S: blue 24V AC/DC ±10% DPDT HA3F-3C24➁ HA3F-3C24V➁ W: white C L R Y: yellow 5V DC ±5% DPDT HA3F-3C61➁ Silver 12V AC/DC ±10% DPDT HA3F-3C63➁ — ➁ 24V AC/DC ±10% DPDT HA3F-3C64 5V DC ±5% DPDT HA3F-31C21➁ HA3F-31C21V➁ Spring return Gold 12V AC/DC ±10% DPDT HA3F-31C23➁ HA3F-31C23V➁ from right ➁ ➁ 24V AC/DC ±10% DPDT HA3F-31C24 HA3F-31C24V C 5V DC ±5% DPDT HA3F-31C61➁ L R Silver 12V AC/DC ±10% DPDT HA3F-31C63➁ — ➁ 24V AC/DC ±10% DPDT HA3F-31C64 ➁ ➁ 5V DC ±5% DPDT HA3F-32C21 HA3F-32C21V Spring return Gold 12V AC/DC ±10% DPDT HA3F-32C23➁ HA3F-32C23V➁ from left 24V AC/DC ±10% DPDT HA3F-32C24➁ HA3F-32C24V➁ C ➁ L R 5V DC ±5% DPDT HA3F-32C61 Silver 12V AC/DC ±10% DPDT HA3F-32C63➁ — 24V AC/DC ±10% DPDT HA3F-32C64➁ ➁ ➁ 5V DC ±5% DPDT HA3F-33C21 HA3F-33C21V Spring return Gold 12V AC/DC ±10% DPDT HA3F-33C23➁ HA3F-33C23V➁ two-way 24V AC/DC ±10% DPDT HA3F-33C24➁ HA3F-33C24V➁ C L R ➁ 5V DC ±5% DPDT HA3F-33C61 ➁ Silver 12V AC/DC ±10% DPDT HA3F-33C63 — 24V AC/DC ±10% DPDT HA3F-33C64➁ • See page 21 for dimensions. Contact Operation Operator Position & Contact Operation (Top View) Positions Contact Left Center Right NO NC NO NC SPDT — C C LR LR 90° 2-position Left Contact Right Contact Left Contact Right Contact NO NC NO NC NO NC NO NC Maintained Spring return from right DPDT — C C C C C C C C Left Contact Right Contact Left Contact Right Contact Left Contact Right Contact L R L R L R L R NO NC NO NC NO NC NO NC NO NC NO NC 45° 3-position DPDT Maintained Spring return Spring return Spring return from right from left two-way C C C C C C (06/11/30) 20 45° 3-position 90° 2-position LOCK TP O R15.5 LOCK H6 Series Miniature Control Units ş16 Dimensions (Illuminated Selector Switch) Panel Tshickness 0.5 to 6 Rubber Gasket Right Contact Locking Ring Anti-rotation Ring 0.6 Left Contact PC Board Terminal Round Anti-rotation Riing 2.8×0.5t Width 0.8×0.5t Round w/Square Bezel 2.6 2 10.5 13.5 11 17.8 5.5 9 36 19.5 24 PC Board Terminal Type Solder/Tab Terminal Type Mounting Hole Layout PC Board Drilling Layout Terminal Arrangement Mounting Centers (Bottom View) (Bottom View) (TOP) (TOP) +0.2 ş16.2 0 6.4 6.8 1.45 Lamp Termina l (+) Lamp Terminal (–) 24 min. Note: For details, see page 30 about • SPDT has C, NO, and NC on the right only. oneboard mounting. Note: Determine mounting centers to ensure • X2 and X2 are wired internally. easy operation. All dimensions in mm. (06/11/30) 21 ş24 ş1.2 holes ş21 24 min. 15.8 X2 X2 X1 C NO NC CNO NC 5 5 6.8 6.4 1 1.45 6 6 6.8 6.4 1 1.45 1.2 1 5 5 X2 X2 X1 C NO NC C NO NC LOCK TOP R15.5 LOCK R14 ş16 H6 Series Miniature Control Units HA1R Selector Pushbuttons Contact Operation Operator Contact Type No. Color Code Shape LC R Contact Position Material Terminal Type ➀ Normal Push Normal Push Normal Push Round Solder Tab Terminal HA1R HA1R-2C2 ➀ Gold DPDT PC Board Terminal Left Right Left Right Left Right Left Right Contact Contact Contact Contact Contact Contact Contact Contact HA1R-2C2V NO NC NO NC NO NC NO NC ➀ NO NC NO NC NO NC NO NC —— Solder Tab Terminal HA1R-2C6 ➀ C C C C C C C C Silver DPDT B: black — G: green R: red Solder Tab Terminal S: blue HA1R-3C2➀ Y: yellow Gold DPDT Left Right Left Right PC Board Terminal Left Right Left Right Left Right Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact HA1R-3C2V➀ NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC Blocked Solder Tab Terminal HA1R-3C6➀ C C C C Silver DPDT C C C C C C — • Specify a button color code in place of ➀ in the Type No. Dimensions Panel Thickness 0.5 to 6 Rubber Gasket Locking Ring Right Contact 0.6 Anti-rotation Ring Left Contact PC Board Terminal Terminal Width 2.8×0.5t Width 0.8×0.5t 2.6 2 10.5 13.5 17.8 5.5 9 36 20 PC Board Terminal Type Solder/Tab Terminal Type Mounting Hole Layout PC Board Panel Cut-out Terminal Arrangement Mounting Centers (Bottom View) (Bottom View) +0.2 (TOP) (TOP) ş16.2 0 6.8 1.45 35 min. Note: Determine mounting centers to Note: For details, see page 30 about ensure easy operation. oneboard mounting. All dimensions in mm. (06/11/30) 22 ş1.2 holes ş25 35 min. ş21 15.8 45° 3-position 90° 2-position Maintained CNO NC C NO NC 5 5 6.8 1 1.45 6 6 6.8 1.45 1 1.2 1 5 5 C NO NC C NO NC Mounting Hole Mounting Hole H6 Series Miniature Control Units ş16 Accessories Ordering Package Shape Material Type No. Dimensions (mm) Type No. Quantity Locking Ring Wrench • Used to tighten the locking ring when Metal installing H6 control units into a panel. ş18 (nickel- MT-001 MT-001 1 • Tighten the locking ring to a torque of plated brass) 0.88 N·m. 60 Lamp Holder Tool 60 ş6.6 Rubber OR-44 OR-44 1 • Used to install and remove LED lamps. ş7.5 Lens Removal Tool Stainless MT-101 MT-101 1 • Used to remove the lens or buttons. Steel 60 Switch Guard • Degree of protection: IP65 (180° spring return) • Used to protect ţush pushbuttons from Standard HA9Z-K1 HA9Z-K1 1 inadvertent operation. Guard (Polyarylate) Base (polyacetal) For oneboard HA9Z-KW1 HA9Z-KW1 1 Standard • Terminal cover is not attached and must be ordered separately. • When wiring the terminals, insert the lead wires into the terminal cover holes before soldering. H6-VL2 H6-VL2PN10 10 TOP marking H6-VL2 Terminal Cover Nylon Exclusive for 4 Unibody 15 21 Pilot Light H6-PVL H6-PVL H6-PVLPN10 10 14 18.2 Rubber • Degree of protection: IP65 26 Nitryl Rubber AL-B6 AL-B6PN05 5 (black) Metal • Degree of protection: IP65 Mounting Hole Plug 2.5 12 Metal (diecast) AL-BM6 AL-BM6 1 Locking ring (plastic) Locking Ring Gasket Panel Thickness 0.5 to 6 (06/11/30) 23 +0.2 0 +0.2 0 ø16.2 ø16.2 ş17.8 ş18 ş16.5 Spring Return 16.3 17.6 ş16 H6 Series Miniature Control Units Maintenance Parts Package Shape SpeciŢcation Type No. Ordering Type No. Color Code ➀➁ Quantity Lens Round, Round w/Square HA9Z-L11➁ HA9Z-L11➁PN05 Specify a color code in place of Bezel ➁ in the Type No. Square HA9Z-L21➁ HA9Z-L21➁PN05 Polyarylate A (amber), G (green), R (red), S (blue), W (white), ş30mm Lens HA9Z-L13➁ HA9Z-L13➁PN05 Y (yellow) Button Round Flush, Round w/Square HA9Z-B11➀ HA9Z-B11➀PN05 Bezel Specify a color code in place of Square Flush HA9Z-B21➀ HA9Z-B21➀PN05 ➀ in the Type No. Round Extended, Polyacetal 5 B (black), G (green), R (red), Round Extended HA9Z-B12➀ HA9Z-B12➀PN05 w/Square Bezel S (blue), W (white), Y (yellow) Square Extended HA9Z-B22➀ HA9Z-B22➀PN05 ş30mm Button HA9Z-B13➀ HA9Z-B13➀PN05 Marking Plate • White Round, Round w/Square Acrylic HA9Z-P1W HA9Z-P1WPN05 • HA9Z-P1W Bezel (engraving area: ş16.4 mm, engraving depth: 0.5 mm max.) • HA9Z-P2W Square Acrylic HA9Z-P2W HA9Z-P2WPN05 (engraving area: 16.4 mm, engraving depth: 0.5 mm max.) Locking Ring For all types Plastic HA9Z-LN HA9Z-LNPN10 10 Anti-rotation Ring For all types Stainless HA9Z-LP HA9Z-LPPN10 except for HA1E Steel Lever Lock For all types • Lever lock is not attached and except for collec- must be ordered separately. Polyacetal HA9Z-LS HA9Z-LSPN10 tive mounting and 5 • Yellow HA1E Selector Color Specify a color code in place of Insert ➀ in the Type No. For selector Polyacetal HA9Z-HC1➀ HA9Z-HC1➀PN05 switch G (green), R (red), S (blue), W (white), Y (yellow) Spare Key • Thickness: 2.0mm For key selector Nickel-plated • Two keys of the same number. KG9Z-SK-231 KG9Z-SK-231PN02 2 switches Brass Different key numbers are not available. Illuminated Specify a color code in place of Selector Knob ➁ in the Type No. Polyarylate For illuminated (w/water- HA1A-F➁ HA1A-F➁ 1 A (amber), G (green), selector switch proof gasket) R (red), S (blue), W (white), Y (yellow) (06/11/30) 24 H6 Series Miniature Control Units ş16 LED Lamps Current Draw Ordering ➁ Illumination Package Operating Voltage Type No. Base Type No. Color Code Quantity AC DC 5V DC ±5% LFTD-5➁ 1 Specify a color code ➁ — 8 mA LFTD-5 in place of ➁ in the LFTD-5➁PN10 10 Ordering Type No. 12V AC/DC ±10% LFTD-1➁ 1 A: amber 9 mA 8 mA LFTD-1➁ SX6S/8×5.4 G: green LFTD-1➁PN10 10 R: red S: blue 24V AC/DC ±10% LFTD-2➁ 1 W: white 9 mA 8 mA LFTD-2➁ Y: yellow LFTD-2➁PN10 10 Transformer Shape Primary Voltage Secondary Voltage Type No. Applicable LED Lamp Separate Mounting Type for 24V 100/110V AC TWR512 200/220V AC 24V AC, 0.5W TWR522 LFTD-2➁ 400/440V AC TWR542 • Terminal covers are supplied with separate mounting type transformers. • Connect only one LFTD LED to separate mounting type transformers. • Use plastic mounting clip BC9Z-E/NS35N when using 400/440V primary voltage. Dimensions SpeciŢcations M3.5 Terminal Screws 100/110V AC, 200/220V AC, Operating Voltage 400/440V AC (50/60 Hz) Power Consumption 2.4VA Secondary Side Primary Side Rated Insulation Voltage 600V Insulation Resistance 100 MΩ minimum (500V DC megger) Mounting Holes 40 Dielectric Strength 2500V AC, 1 minute 2-ø3.3 48 Operating –30 to +60°C (no freezing) Standard Temperature 52 Operating Condition Relative Humidity 35 to 85% (no condensation) Operating Vibration Resistance 5 to 55 Hz, amplitude 0.5 mm Extremes Terminal 2 Cover Shock Resistance Damage Limits 1,000 m/s (100G) Terminal Screw M3.5 2 Applicable Wire 2 mm maximum, 2 wires maximum All dimensions in mm. Accessories Package Description Appearance Description Type No. Ordering Type No. Quantity Aluminum BAA1000 BAA1000PN10 Weight: Approx. 200g DIN Rail Steel BAP1000 BAP1000PN10 Weight: Approx. 320g Steel 10 BNL6 BNL6PN10 45 Weight: Approx.15g 9 Mounting Clip 9.5 48.6 Plastic BC9Z-E/NS35N BC9Z-E/NS35NPN10 Weight: Approx.15g • Use plastic mounting clip BC9Z-E/NS35N when using 400/440V primary voltage. (06/11/30) 25 32.8 22 40 41 30 R27.4 R27.4 ş16 H6 Series Miniature Control Units Maintenance Parts Dimensions • Terminal Cover For Separate Type (except for unibody type pilot lights) For Unibody Type Pilot Lights (H6-VL2) (H6-PVL) 39.5 47 14 15 18.2 • Switch Guard For Flush Pushbuttons and Illuminated Pushbuttons (HA9Z-K1) 41 25 minimum 24 Panel thickness 0.5 to 5 15 0.4 (HA9Z-KW1) 39.5 Panel thickness 0.5 to 6 13.9 All dimensions in mm. (06/11/30) 26 57 minimum 29 41.2 41.2 ş16.3 ş16 H6 Series Emergency Stop Switches H6 Emergency Stop Switches Contact Ratings SpeciŢcations Rated Insulation Voltage (Ui) 250V Operating Temperature –25 to +60°C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Rated Thermal Current (Ith) 10A Storage Temperature –30 to +80°C Rated Operating Voltage (Ue) 30V 125V 250V Contact Resistance 50 mΩ maximum (initial value) Resistive Load —5A 3A (AC-12) AC Insulation Resistance 100 MΩ minimum (500V DC megger) 50/60 Hz Inductive Load Between live and dead parts: —3A 1.5A Rated (AC-15) 2,500V, 1 minute Operating Resistive Load Between terminals of different poles: Current 2A 0.4A 0.2A Dielectric Strength (DC-12) 2,500V, 1 minute DC Between terminals of the same pole: Inductive Load 1A 0.22A 0.1A 1,000V, 1 minute (DC-13) Operating extremes: Minimum applicable load (reference value): 3V AC/DC, 5 mA Vibration Resistance 5 to 55 Hz, amplitude 0.75 mm (Applicable range is subject to the operating condition and load.) 2 Damage limits: 100 m/s (10G) 2 Operating extremes: 300 m/s (30G) maximum Shock Resistance Contact Ratings 2 Damage limits: 1,000 m/s (100G) maximum Applicable Standard File No. or Organization Mechanical Durability 1,000,000 operations minimum UL508 File No. E68961 (HA1E), E55996 (HA1B) Electrical Durability 100,000 operations minimum File No. LR21451 (HA1B), Degree of Protection IP65 CSA C22.2 No. 14 E68961 (HA1E) (c-UL) Solder/tab terminal #110 (HA1B) Terminal Style Solder terminal (HA1E) EN60947-5-5 DEMKO PC board terminal HA1B-V2E2R: 23g Weight (approx.) HA1E-V2S2R: 19g HA1B Emergency Stop Switch (Pushlock Turn Reset) IDEC’s Unique safety lock mechanism. Ideal for emergency stop of machine tools. Features Type No. Contact Button • 36-mm depth behind the panel same Shape Contact Solder/Tab PC Board Material Color as H6 and L6 series control units. Terminal Terminal • Direct opening action mechanism HA1B (IEC 60947-5-1, Annex K) 1NC HA1B-V2E1R HA1B-V2E1VR • Safety lock mechanism to prevent inadvertent operation. ş25mm Silver Red Mushroom Contact only • The operator cannot be removed from the front of the panel. 2NC HA1B-V2E2R HA1B-V2E2VR • UL recognized, CSA certiŢed, DEMKO approved. HA1E Series Short Body Emergency Stop Switch (Pushlock Turn Reset) Short 28.5-mm-long emergency stop switch suitable for installing on teaching pendants. Features Type No. Contact Button • Short 28.5-mm-long body Shape Contact Solder/Tab PC Board Material Color • Direct opening action mechanism Terminal Terminal (IEC 60947-5-1, Annex K) HA1E • Safety lock mechanism to prevent 1NC HA1E-V2S1R HA1E-V2S1VR inadvertent operation. ş25mm Silver Red • The operator cannot be removed from Mushroom Contact only the front of the panel. • UL recognized, CSA certiŢed, DEMKO 2NC HA1E-V2S2R HA1E-V2S2VR approved. (06/11/30) 27 R15.5 LOCK + ş16 2 +0 2 ş16.2 0 +0.2 ş16.2 0 0.2 . 0 . ş16 LOCK ş16 H6 Series Emergency Stop Switches Dimensions (Emergency Stop Switch) Panel Thickness 0.5 to 6 Rubber Gasket • • • • HA1B Panel Cut-out 2.6 +0.2 3.2 Locking Ring ş16.2 0 PC Board Drilling Layout Anti-rotation Ring 0.6 (Bottom View) PC Board Terminal (TOP) Width 0.8×0.5t Terminal Width 2.8×0.5t +0.2 5.3 5.3 1.7 0 When using a nameplate 10.5 13.5 11 17.8 936 25 5.2 PC Board Terminal Type Solder/Tab Terminal Type • • • • HA1E Panel Thickness 0.5 to 3.2 Panel Cut-out Rubber Gasket Locking Ring 3.2 7 0.6 2.6 3 PC Board Drilling Layout (Bottom View) Terminal Width 2.8×0.5t (TOP) PC Board Terminal 12.8 Lever Stop +0.2 5.3 5.3 Width 0.8×0.5t 1.7 0 When using a nameplate 17.8 15.3 11 4.2 5.2 24.3 25 PC Board Terminal Type Solder/Tab Terminal Type Terminal Arrangement (bottom view) (TOP) • • • • HA1E .1 (NC) .1 (NC) .2 (NC) .2 (NC) Note: 1NC type has contacts on the left only. Accessories • • • • Dimensions • • • • Nameplate for ş16mm Emergency Stop Switch Type No. Legend Remarks Material: polyamide HAAV0 (blank) Background color: yellow EMERGENCY Legend color: black HAAV-27 1.7 0.3 (Gasket Thickness) STOP Package quantity: 1 • • • • • • Panel Cut-out • • Panel Thickness � +0.2 HA1B-V2E R: 0.5 to 4.4 mm 1.7 0 � HA1E-V2S R: 0.5 to 1.6 mm All dimensions in mm. (06/11/30) 28 ş43.5 ş24.9 ş1.2 holes ş1.2 holes +0.2 ş16.2 0 ş24.9 +0.1 ş3 0 5.4 5.4 8.7 8.7 ş21 15.8 15.8 3.1 8.9 8.7 5.3 5.3 5.3 8.7 5.4 8.7 5.4 5.3 5.3 1.2 5.3 5.3 8.7 5.4 ş23.6 1.2 ş24.9 +0.2 17.9 0 +0.2 7.8 0 +0.2 17.9 0 +0.2 17.9 0 H6 Series Miniature Control Units ş16 Safety Precautions • Turn off the power to H6 series control units before installation, re- • For wiring, use wires of a proper gauge to meet voltage and current moval, wiring, maintenance, and inspection of the control units. requirements. Improper soldering may cause overheating and cre- Failure to turn power off may cause electrical shocks or Ţre hazard. ate a Ţre hazard. • To avoid burning your hand, use the lamp holder tool when replac- ing lamps. Instructions 2. Push the bulb, and remove from the rear of the lamp holder. Replacement of Lens and Marking Plate • Removing the Lens Assembly Remove the lens assem- bly (color lens, marking plate, and lens holder) by inserting a screwdriver into the recess of the lens thorough the bezel. • Installing the Lamp • Removing the Marking Plate 1. Insert the lamp into the lamp holder from the rear, and push in Remove the marking plate by pushing the lens from the rear to dis- completely using the smaller end of the lamp holder tool. engage the latches between the lens and the lens holder, using the 2. Hold the bulb with the lamp holder tool as shown below. screwdriver as shown below. Lamp Holder Lamp Holder Tool Note: The translucent Ţl- ter in the lens holder can- not be removed because this Ţlter is sealed to make the unit waterproof. 3. Place the insertion guide of the lamp TOP marking holder and the TOP marking side or the groove in the operator unit in the same direction. Insert the lamp Plastic Part • Installing holder into the housing with the lamp For round lens types, holder tool. Then push the lamp place the marking plate on the lens holder with the projection Grooves of operating axis lightly and turn it clockwise to install. (one each on top and bottom) engaged and press the lens onto the lens holder to engage the latches. For square lens types, insert the marking plate into the Panel Mounting lens, and press the lens onto the holder to engage the latches. Remove the contact block from the operator. Insert the operator Note: Make sure of correct orientation of the marking plate. into the panel cut-out from the front, then install the contact block to [Round Lens Type] [Square Lens Type] the operator. • Removing the Contact Block Turn the locking lever on the contact block in the direction opposite to the arrow on the housing. Then the contact block can be removed. Lens Marking Plate Lens Holder Lens Marking Plate Lens Holder • Installing the Contact Block Insert the contact block with the TOP mark- Replacement of Lamps ings on the contact block and the operator Lamps can be replaced using the lamp holder tool (OR-44) from the placed in the same direction. Then lock the front of the panel, or by removing the contact block from the opera- units, turning the locking lever in the direction tor. of the arrow. • Removing the Lamp • Notes for Mounting 1. Slip the lamp holder tool onto the lamp head. Then push slightly, Use the optional Ring Wrench (MT-001) to mount the operator onto and turn the lamp holder tool counterclockwise. a panel. Tightening torque should not exceed 0.88 N·m. Do not use pliers. Do not tighten with excessive force, otherwise the locking ring will be damaged. • Collective Mounting As the locking lever can be turned easily from the rear of the units using a screwdriver, the contact blocks can be removed even when mounted collectively. 9.3 (06/11/30) 29 9.3 ( ) 9-ş1.2 Note 2 ş16 H6 Series Miniature Control Units Connection Instructions Positive-lock connector and easy-lock connector are applicable to tab terminals. Recommended Connectors Marking Plates and Films For H6 series illuminated pushbuttons and pilot lights, legends and Positive-lock Connector Easy-lock Connector Item symbols can be engraved on marking plates, or printed mylar Ţlm (Tyco Electronics) (Nichifu Co., Ltd.) can be inserted under the lens for labelling purposes. 2 2 0.2 to 0.5 mm 175412-1 0.2 to 0.3 mm OSS-62852F3 Terminal 2 2 • Marking Plate and Marking Film Size 0.2 to 1.25 mm 174778-1 0.5 to 1.25 mm OSS-62815F3 Round Lens Housing 174779-1 NET1-28-1P Lens Square Lens (round, round w/square Note: Positive-lock is a registered trademark of Tyco Electronics. bezel) Engraving Engraving One Board Mounting Area Area 16.4 mm 16.4 mm Built-in Marking Plate • Engraving must be made on the engraving area within 0.5mm deep. • The marking plate is made of white acrylic resin. 12 Control Units Applicable 16.4 mm Marking Film • Two 0.1mm-thick Ţlms or one 0.2mm-thick Ţlm can be 8 Control Units installed in the lens. • Marking Ţlm is not included. Mounting the PC board terminal type control units on a PC board • Recommended marking Ţlm: Polyester Ţlm offers the following features. • Insertion Order of Marking Plate and Film Features [Round Lens Type] • Reduced installation labor, easy wiring, space saving, and stan- TOP marking dardization. • Since the contact blocks on the PC board can be removed easily using a locking lever, the H6 series control units are easy to main- tain. • Because the H6 series control units require no studs for fastening Note: Film is not supplied. Lens Film Marking Lens Holder Switch the control unit to a PC board, special preparation of the control Plate panel is not needed. [Square Lens Type] Notes for Designing PC board and Circuit TOP marking • Use 1.6-mm-thick glass epoxy PC board with drilled holes. • Design a circuit so that the H6 series control unit can operate within the rated voltage and current range. Make sure that inrush Note: Film is not supplied. Make sure of correct orienta- current and voltage do not exceed the rating. tion of the marking plate. Lens Film Marking Lens Holder Switch • Minimum applicable load is 5V AC/DC,1 mA on gold contacts. Plate Applicable range is subject to the operating condition and load. • Since the 2.8-mm-wide terminal 1.6 Wiring (PC Board) touches the PC board as shown on 1. Solder the terminals at 350°C within 3 seconds using a 60W sol- the right, short circuit may occur with dering iron. Sn-Ag-Cu type is recommended when using lead- pattern lines. Design a circuit carefully free solder. When soldering, do not touch the control unit with the to prevent short circuit. soldering iron. Also ensure that no tensile force is applied to the terminal. Do not bend the terminal or apply excessive force to the terminal. 2. Use non-corrosive liquid ţux. Soldered side Mounting side Notes on Terminal Cover PC Board Drilling Layout Insert the terminal cover into the contact block with the TOP mark- Note 1: When designing, note the align- ings on the contact block and the terminal cover in the same direc- ment of centerlines of the con- tion. tact blocks and centerlines of Note: When wiring, insert the lead wires into the terminal cover 10.7 the operators. holes before soldering. Note 2: The diameter of the terminal hole is 1.2 mm. TOP Marking Side TOP Marking Side 1.45 (Note 1) 6.4 6.8 Terminal Cover (06/11/30) 30 ş6 drilled hole for operation 0.85 mm ş16.8 mm ş18.4 mm 0.85 mm 18.4 mm 1 (Note 1) 5 5 10.7 5.0 5.0 2.4 2.4 2.8 2.8 2.8 H6 Series Miniature Control Units ş16 Installation and Removal of Contact Blocks Turn the locking lever to install and remove the contact block on the PC board by using a screwdriver from a hole (ş6 mm) of the PC board. ş6-mm-hole for installation and removal Hole diameter may vary to meet installation requirements. When the locking lever can be turned by using a screwdriver from the upper or right space, the holes are not necessary. Upper Space Right Space Mounting Holes and Assembly Procedure • Drill mounting holes in the panel as shown below. When the units are mounted collectively, provide adequate clearance. +0.1 ş16.0 0 24 min. • Assembly Procedure 1. Install the operator to the operation panel. 2. Insert the contact block to the operator from the rear. 3. Turn the lock lever to lock the contact block. 4. Insert the PC board to terminals and solder. Note 1: Make sure that each terminal is inserted into the PC board correctly. Note 2: Do not apply tensile force to the connector cable for extended period of time. Note 3: Do not expose the contact block to water. Note 4: Ensure to lock contact blocks when the contact blocks are installed on the operators. (06/11/30) 31 24 min. ş16 HA5W Series Oneboard Control Units Reduces wiring and installation space. Achieves standard panel design. Reduce time and space by using a PC board and ţat cable solution. Standard panels can be designed with ţexibility. • The separate structure of operator and contact/board makes maintenance easy. • IDEC’s unique lock lever structure requires no studs on the board. • H6 series control units can be used without modiŢcation. • Available with I/O terminals for parallel wiring. BX2A-26AT2 12 LED Illuminated I/O Terminal (26-pin) Pushbuttons 8 LED Illuminated Rear Side Pushbuttons Types Built-in LED Lamp Ratings No. of Illumination Operating Type No. LFTD-2➁ Type No. Notes Control Units Type Voltage Base SX6S/8×5.4 Panel color: 8 24V AC/DC ±10% HA5W-84 Operating Voltage 24V AC/DC ±10% LED Munsell 12 24V AC/DC ±10% HA5W-24 5Y7/1 Rated Voltage 24V AC/DC AC 9 mA Current Draw DC 8 mA Contact Ratings Specify a color code in place of ➁. Rated Operating Voltage 24V DC Color Code ➁ A (amber), G (green), R (red), S (blue), W Rated Operating Current 30 mA (resistive load) (white), Y (yellow) Contact Material Gold-clad silver Lamp Base Color Same as illumination color Voltage Marking Die stamped on the lamp base Ordering Information Approx. 50,000 hours Life (reference value) (When used on complete DC, luminance 1. Specify a button or lens color code in the Type No. reduces to 50% of the initial intensity.) [Example] A, R, W, Y HA5W-84 RRRR WW GG Type No. Specify color codes for the control units in order of (1) to (8) (see below). Internal Circuit G, S 2. All units are supplied with an LED lamp. 3. Illuminated pushbuttons HA2L-M1C14V➁ (momentary, SPDT) LED Chip are provided. Protection Diode Zener Diode 8-unit Type 12-unit Type TOP TOP (1) (2) (3) (4) (1) (2) (3) (4) (5) (6) RRRR WW G G (5) (6) (7) (8) (7) (8) (9) (10) (11) (12) (06/11/30) 32 6-ş4.5 4-ş4.5 C LO K HA5W Series Oneboard Control Units ş16 Dimensions 8-unit Type 12-unit Type ( ) ( ) TOP TOP 116 164 53 53 77 77 24 24 24 24 24 24 24 24 Wiring Diagram 8-unit Type 52.32 52.32 [CN1] 2 3 4 5 6 7 8 9 1 ( ) +24V 94 142 PL1 PL2 PL3 PL4 PL5 PL6 PL7 PL8 [CN1] [CN1] PB1 PB2 PB3 PB4 PB5 PB6 PB7 PB8 26 14 15 16 17 18 19 20 21 12-unit Type [CN1] 2 3 4 5 6 7 8 9 10 11 12 13 1 Panel Cut-out ( ) +24V PL1 PL2 PL3 PL4 PL5 PL6 PL7 PL8 PL9 PL10 PL11 PL12 8-unit Type 12-unit Type PB1 PB2 PB3 PB4 PB5 PB6 PB7 PB8 PB9 PB10 PB11 PB12 ±0.2 ±0.2 ±0.2 ±0.2 77.0 77.0 53.0 53.0 26 14 15 16 17 18 19 20 21 22 23 24 25 ( ) (TOP) TOP PL1 PL2 PL3 PL4 PL1 PL2 PL3 PL4 PL5 PL6 PB1 PB2 PB3 PB4 PB1 PB2 PB3 PB4 PB5 PB6 PL5 PL6 PL7 PL8 PL7 PL8 PL9 PL10 PL11 PL12 PB5 PB6 PB7 PB8 PB7 PB8 PB9 PB10 PB11 PB12 +1.0 +1.0 148.0 0 25··· · · · · · · · 3 1 100.0 0 26··· · · · · · · · 4 2 Installing and Removing the Contact Degree of Protection Blocks/PC Board The HA5W Oneboard Control Units become IP65 when waterproof gasket is used on the mounting The contact blocks and PC board can be installed and screws. The HA2L-M1C14V illuminated pushbuttons removed by operating the lock levers using a screwdriver used on the HA5W are IP65. as shown below. Panel Mounting Screws Use M4 countersunk screws for panel mounting. Drilled Hole for Operation All dimensions in mm. (06/11/30) 33 +0.3 0 +0.3 0 4-ş4.2 6-ş4.2 50.5 56.2 11 27 24 38 +1.0 50.0 0 ±0.2 58.0 58 68 50.5 56.2 11 24 27 38 +1.0 50.0 0 ±0.2 58.0 58 68 ş16 HA5W Series Oneboard Control Units Wiring Example For oneboard control units, use the connectors compliant with MIL standard. IDEC’s Applicable Connector HA5W-8∗ Type No. Description JE1S-261 26-pin, w/strain relief JE1S-261 (IDEC) Flat cable (26-pin) JE1S-261 (IDEC) BX2A-26AT2 IDEC I/O Terminal BT1.25-9-1 (Nichifu) Safety Precautions • Turn off the power to the oneboard control units before installation, removal, wiring, maintenance, and inspection. Failure to turn power off may cause electrical shocks or Ţre hazard. • To avoid burning your hand, use the lamp holder tool when replacing lamps. (06/11/30) 34 H6 Series Miniature Control Units ş16 (06/11/30) 35 Specifications and other descriptions in this catalog are subject to change without notice. 7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, Japan Tel: +81-6-6398-2571, Fax: +81-6-6392-9731 E-mail: products@idec.co.jp IDEC CORPORATION (USA) IDEC ELEKTROTECHNIK GmbH IDEC IZUMI (H.K.) CO., LTD. 1175 Elko Drive, Sunnyvale, CA 94089-2209, USA Wendenstrasse 331, 20537 Hamburg, Germany Unit 1505-07, DCH Commercial Centre No. 25, Tel: +1-408-747-0550 / (800) 262-IDEC (4332) Westlands Road, Quarry Bay, Hong Kong Tel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24 Fax: +1-408-744-9055 / (800) 635-6246 E-mail: service@idec.de Tel: +852-2803-8989, Fax: +852-2565-0171 E-mail: opencontact@idec.com E-mail: info@hk.idec.com IDEC (SHANGHAI) CORPORATION IDEC CANADA LIMITED Room 608-609, 6F, Gangtai Plaza, No. 700, IDEC TAIWAN CORPORATION Unit 22-151, Brunel Road, Mississauga, Ontario, 8F-1, No. 79, Hsin Tai Wu Road, Sec. 1, Yan'an East Road, Shanghai 200001, PRC L4Z 1X3, Canada Tel: +86-21-5353-1000, Fax: +86-21-5353-1263 Hsi-Chih, Taipei County, Taiwan Tel: +1-905-890-8561, Toll Free: (888) 317-4332 E-mail: idec@cn.idec.com Tel: +886-2-2698-3929, Fax: +886-2-2698-3931 Fax: +1-905-890-8562 E-mail: service@idectwn.com.tw IDEC (BEIJING) CORPORATION E-mail: sales@ca.idec.com Room 211B, Tower B, The Grand Pacific Building, IDEC IZUMI ASIA PTE. LTD. IDEC AUSTRALIA PTY. LTD. No. 31, Tannery Lane #05-01, Dragon Land 8A Guanghua Road, Chaoyang District, 2/3 Macro Court, Rowville, Victoria 3178, Australia Beijing 100026, PRC Building, Singapore 347788 Tel: +61-3-9763-3244, Toll Free: 1800-68-4332 Tel: +65-6746-1155, Fax: +65-6844-5995 Tel: +86-10-6581-6131, Fax: +86-10-6581-5119 Fax: +61-3-9763-3255 E-mail: info@sg.idec.com IDEC (SHENZHEN) CORPORATION E-mail: sales@au.idec.com Unit AB-3B2, Tian Xiang Building, Tian’an Cyber Park, IDEC ELECTRONICS LIMITED Fu Tian District, Shenzhen, Guang Dong 518040, PRC Unit 2, Beechwood, Chineham Business Park, Tel: +86-755-8356-2977, Fax: +86-755-8356-2944 Basingstoke, Hampshire RG24 8WA, UK Tel: +44-1256-321000, Fax: +44-1256-327755 E-mail: sales@uk.idec.com www.idec.com Cat. No. EP1051-0 DECEMBER 2006 11.9DNP PRINTED IN JAPAN (06/11/30)