Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work HS1C Solenoid Locking Safety Switches HS1C Full Size Solenoid Locking Switches Key features: • Rugged aluminum die-cast housing • 1500N locking retention force • Flexible Installation: The actuator can be accessed from two directions • Select from four different circuit configurations • IP67 HS1C Series Functionality Two Conduit Ports (G1/2) Use IP67 conduit or gland Indicator Terminal Block (M3.5) LED Indicator (green or red) Tubular Clamp Terminal Block (M3) Two Actuator Entry Slots Manual Unlocking Entry (M4 hole) Accessible using a small screwdriver after removing a TORX screw on the Ground Terminal (M4) unlocking entry TORX is a registered trademark of Camcar Textron. Part Numbers (Mechanical Spring Lock Only) Contact Configuration Indicator LED Part Number Contact Configuration Indicator LED Part Number 1 1 Monitor Circuit Monitor Circuit 2 2 Green HS1C-R44R-G Green HS1C-R244R-G 3 3 Main Circuit Main Circuit 4 4 + 5 5 Solenoid Power Solenoid Power 6 6 – Indicator Indicator Red HS1C-R44R-R Red HS1C-R244R-R 7 7 Contacts are linked to Contacts are linked to the solenoid mechanically. the solenoid mechanically. 8 8 1 1 Monitor Circuit Monitor Circuit 2 2 Green HS1C-R144R-G Green HS1C-R344R-G 3 3 Main Circuit Main Circuit 4 4 + 5 5 Solenoid Power Solenoid Power 6 Indicator 6 – Indicator Red HS1C-R144R-R Red HS1C-R344R-R 7 7 Contacts are linked to Contacts are linked to 8 the solenoid mechanically. the solenoid mechanically. 8 Standard stock items in bold 1705151128 800-262-IDEC (4332) • USA & Canada 347 HS1C Solenoid Locking Safety Switches Actuator Keys & Accessories Appearance Part Number Description Appearance Part Number Description HS9Z-A1 Straight Actuator HS9Z-T1 Key Wrench (included with switch) HS9Z-A2 Right-angle Actuator HS9Z-P1 Conduit Opening Plug (G1/2) HS9Z-A3 Adjustable Actuator Specifications EN1088, IEC60947-5-1, EN60947-5-1, GS-ET-19, UL508, Conforming to Standards GB 140485.5 (CCC approval), CSA C22.2 No. 14 Operating Temperature –20 to +40˚C (no freezing) Storage Temperature –40 to +80˚C Relative Humidity 40 to 85% (no condensation) Altitude 2,000m maximum Rated Insulation Voltage (U ) 300V (between LED or solenoid and ground: 60V) i Impulse Withstand Voltage (U ) 4 kV (between LED or solenoid and ground: 2.5 kV) imp Between live and dead metal parts: 100 MΩ minimum Between live metal part and ground: 100 MΩ minimum Insulation Resistance Between live metal parts: 100 MΩ minimum Between terminals of the same pole: 100 MΩ minimum Electric Shock Protection Class Class 1 (IEC61140) Pollution Degree 3 (IEC60947-5-1) Degree of Protection IP67 (IEC60529) Operating Extremes 10 to 55 Hz, amplitude 0.5 mm Vibration Resistance 2 Damage Limits 60 m/sec (approx. 6G) 2 Shock Resistance 1,000 m/s (approx. 100G) Actuator Retention Force 1,500N minimum Actuator Operating Speed 0.05 to 1.0m/s Direct Opening Travel 11mm minimum Direct Opening Force 20N minimum Thermal Current (I ) Main circuit: 10A, Auxiliary circuit: 3A th Contact Opening Distance Main circuit: 1.7 mm max., Auxiliary circuit: 1.2 mm min. Operating Frequency 900 operations/hour max. Mechanical Life 1,000,000 operations Electrical Life 100,000 operations (rated load) Conditional Short-circuit Current 100A (IEC60947-5-1) Recommended Short Circuit Protection 250V, 10A fuse (Type D01 based on IEC60269-1, 60269-2) 1705151128 www.IDEC.com 348 AS-Interface Safety at Work Light Curtains Safety Control Relays Enabling Switches Interlock Switches XW Series E-Stops Overview Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work HS1C Solenoid Locking Safety Switches Specifications, con’t Operating Voltage 24V DC (100% duty cycle) Current 415mA (initial value) Coil Resistance 58Ω (at 20ºC) Solenoid Energizing Voltage Rated voltage x 85% maximum (at 20ºC) Unit De-energizing Voltage Rated voltage x 10% minimum (at 20ºC) Continuous Applicable Voltage Rated voltage x 110% Insulation Class Class B Operating Voltage 24V DC Current 10 mA Indicator Light Source LED lamp Lens Color Red or Green Weight (approx.) 660g Contact Ratings Operating Voltage (Ue) 30V 125V 250V Resistive load (AC12) 10A 10A 6A AC Inductive load (AC15) 10A 5A 3A Resistive load (DC12) 6A – – DC Rated Operating Current (Ie) Inductive load (DC13) 3A 0.9A – Resistive load (AC12) – 3A 3A AC Inductive load (AC15) – – 3A Resistive load (DC12) 3A – – DC Inductive load (DC13) – 0.9A – 1705151128 800-262-IDEC (4332) • USA & Canada 349 Main Auxiliary Circuit Circuit HS1C Solenoid Locking Safety Switches Dimensions (mm) HS1C-R44R-* - using the straight actuator (HS9Z-A1) HS1C-R44R-* - using the Right-angle actuator (HS9Z-A2) 1705151128 www.IDEC.com 350 AS-Interface Safety at Work Light Curtains Safety Control Relays Enabling Switches Interlock Switches XW Series E-Stops Overview Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work 90° R 3.2 HS1C Solenoid Locking Safety Switches Accessories Straight Actuator (mainly for sliding doors) Right-angle Actuator (mainly for hinged doors) HS9Z-A1 HS9Z-A2 9 49.3 20 41.5 19.3 11.5 11 2-M6 1 7.4 1 Screws 2-M6 Screws Actuator 7.4 Actuator Cover Mounting Actuator (red) Actuator Cover *After installing the actuator, Holes Mounting (red) remove the actuator Holes cover. 2 Adjustable Actuator • The actuator angle is adjustable (0˚ to 20˚) for hinged doors. • The minimum radius of the door opening can be as small as 100mm. 18 For HS1/HS2 Series (HS9Z-A3) (Note) Actuator Stop Film (attached) 2-M6 Screws 5 2 20 Door hinge Actuator Mounting Holes Angle Adjustment Screw (M3 hexagon socket head screw) 30 All dimensions in mm. 3.5 min. 3.8 max. 3.6 min. 3.5 max. Applicable Crimping Terminals • (Refer to the Crimping Terminal 1 or 2 shown in the drawing below.) • HS1C ø4.1 min. ø3.6 min. Terminals No. 1 to 6: Use solid or stranded wires only (crimping terminals not applicable). Crimping Terminal 1 Crimping Terminal 2 Terminals No. 7 and 8: Crimping Terminal 1 Use an insulation tube on the crimping terminal. Ground Terminal: Crimping Terminal 2 • HS1B Approx. 4mm Crimping Terminal Wire Ground Terminal: Crimping Terminal 2 Other Terminals: Crimping Terminal 1 HS2B, HS5B, and HS1E Crimping Terminal 1 Insulation Tube 1705151128 800-262-IDEC (4332) • USA & Canada 351 R3.2 R 3.2 2 20° 22 33 max. 40 2 12 (21) 22 1 4.1 29.2 29.2 43 44 58 72 58 6.9 max. 22 22 40 7.6 max. 4.1 29.2 43