IDEC CORPORATION HS2B-11NB

Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work HS2B Standard Interlock Safety Switches HS2B Full Size Interlock Switches Key features: • Direct Opening Action: If the door is forced open, the contacts are disconnected even if they are welded or stuck • Available with or without an indicator (red or green) • Flexible Installation: Two actuator entries and three conduit ports are provided • 1NC-1NO contacts • Compact and lightweight plastic housing • Degree of Contact Protection: IP67 EN1088 GS-ET-15 EN60947-5-1 BG standard in Germany IEC60947-5-1 Direct Opening Action Double Insulation Part Numbers Body Contact Model Pilot Light Part Number Configuration Without HS2B-11NB HS2B With red LED HS2B-114NB-R 1NC-1NO (plastic housing) With green LED HS2B-114NB-G Order the actuators separately (not supplied with the switch). Actuator Keys & Accessories (order separately) Appearance Part Number Description Straight Actuator HS9Z-A1 (Mainly for sliding doors) Right-angle Actuator HS9Z-A2 (Mainly for rotating doors) HS9Z-A3 Adjustable Actuator HS9Z-P1 Conduit Opening Plug 800-262-IDEC (4332) • USA & Canada 283 HS2B Standard Interlock Safety Switches Specifications Conforming to Standards IEC60947-5-1, EN60947-5-1, GS-ET-15, UL508 Operating Temperature –25 to +70˚C (no freezing) Storage Temperature –40 to +80˚C Operating Humidity 85% RH maximum (no condensation) Altitude 2,000m maximum Rated Insulation Voltage (Ui) 300V (between LED and ground: 60V) Impulse Withstand Voltage (Uimp) 4 kV (between LED and ground: 2.5 kV) Between live and dead metal parts: 100 MΩ minimum Between live metal part and ground: 100 MΩ minimum Insulation Resistance Between live metal parts: 100 MΩ minimum Between terminals of the same pole: 100 MΩ minimum Electric Shock Protection Class Class II (IEC61140) Pollution Degree 3 (IEC60947-5-1) Degree of Protection IP67 (IEC60529) Operating Extremes 10 to 55 Hz, amplitude 0.5mm Vibration Resistance 2 Damage Limits 60 m/sec (approx. 6G) 2 Shock Resistance 1,000 m/sec (approx. 100G) Actuator Operating Speed 1 m/sec maximum Positive Opening Travel 11 mm minimum Positive Opening Force 36N minimum Thermal Current (Ith) 10A Operating Frequency 900 operations/hour Mechanical Life 1,000,000 operations Electrical Life 100,000 operations (rated load) Conditional Short-circuit Current 100A (IEC60947-5-1) Recommended Short Circuit Protection 250V, 10A fuse (Type D01 based on IEC60269-1, 60269-2) Operating Voltage 24V DC Current 10 mA Indicator Light Source LED lamp Lens Color Red or Green (12 mm dia. Lens) Weight Approx. 130g Contact Ratings Operating Voltage (Ue) 30V 125V 250V Resistive load (AC12) 10A 10A 6A AC Rated Operating Current (Ie) Inductive load (AC15) 10A 5A 3A Resistive load (DC12) 8A 2.2A 1.1A DC Inductive load (DC13) 4A 1.1A 0.6A www.IDEC.com 284 AS-Interface Safety at Work Light Curtains Safety Control Relays Enabling Switches Interlock Switches XW Series E-Stops Overview Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work ø5.4 HS2B Standard Interlock Safety Switches Application Examples and Circuit Diagrams Status 1 Status 2 Status 1 Status 2 Door/ Door/ Door Closed Door opened Door Closed Door opened Switch Switch Machine ready to operate Machine cannot be started Machine ready to operate Machine cannot be started Status Status 1 1 2 2 HS2B-11 (1NO-1NC) 3 3 Door Circuit 4 4 Diagram + + - - Main Main 3-4: Closed 3-4: Open 3-4: Closed 3-4: Open Circuit Circuit Aux. Aux. 1-2: Open 1-2: Closed 1-2: Open 1-2: Closed Circuit Circuit 1. Main Circuit: used to enable the machine to start only when the main circuit is closed. Auxiliary Circuit: used to indicate whether the main circuit or door is open or closed. 2. Terminals + and - are used for the LED indicator, and are isolated from door status. Dimensions (mm) Using the straight actuator (HS9Z-A1) (Horizontal Mounting) (Vertical Mounting) RP RP Conduit Conduit 30 56.7 36.5 54.3 30 Port G1/2 Port G1/2 9 13.8 13.8 9 Actuator Actuator 37.4 37.4 36.5 Actuator Cover Actuator Cover 96 96 98 98 ±1.0 8.5 2-M5 Screws Slot Plug (Note) Interlock Switch Mounting Hole Layout (Horizontal Mounting) (Vertical Mounting) RP Conduit Conduit 30 48.9 36.5 98 Port G1/2 RP Port G1/2 6 46.5 30 96 6 37.4 36.5 Actuator Actuator Actuator Cover Actuator Cover 37.4 96 98 ±1.0 19.5 11 800-262-IDEC (4332) • USA & Canada 2-M5 Screws 285 Slot Plug (Note) Interlock Switch Mounting Hole Layout ø5.4 ø5.4 ø5.4 22 43 40 43 22 40 ±1.0 17.5 ±1.0 6.5 11 10 10 15 42 15 42 52 35 35 52 57 40 40 57 42 42 40 43 22 40 43 42 10 22 10 42 Auxiliary Circuit Main Circuit 15 52 15 52 57 35 35 57 40 40 Main Circuit Auxiliary Circuit ø5.4 90° R3.2 (Horizontal Mounting) (Vertical Mounting) RP RP Conduit Conduit 30 56.7 36.5 54.3 30 Port G1/2 Port G1/2 9 13.8 13.8 9 Actuator Actuator 37.4 37.4 36.5 Actuator Cover Actuator Cover 96 96 98 98 ±1.0 8.5 2-M5 Screws Slot Plug (Note) HS2B Standard Interlock Safety Switches Interlock Switch Mounting Hole Layout Dimensions (mm), continued Using the Right-angle actuator (HS9Z-A2) (Horizontal Mounting) (Vertical Mounting) RP Conduit Conduit 36.5 30 48.9 98 RP Port G1/2 Port G1/2 6 96 46.5 30 6 37.4 36.5 Actuator Actuator Actuator Cover 37.4 Actuator Cover 96 98 ±1.0 19.5 11 2-M5 Screws Slot Plug (Note) Interlock Switch Mounting Hole Layout Plug the unused actuator insertion slot using the slot plug supplied with the interlock switch. Actuator Dimensions Straight Actuator HS9Z-A1 Right-angle Actuator HS9Z-A2 Angle-adjustable Actuator HS9Z-A3 9 49.3 20 41.5 18 (Note) 19.3 11.5 11 Actuator Stop 2-M6 1 7.4 1 Film (attached) Screws 2-M6 Screws Actuator 7.4 Actuator Cover Mounting Actuator (red) Actuator Cover Holes Mounting (red) 2-M6 Screws Holes 5 2 20 Door hinge Actuator 2 Mounting Holes Angle Adjustment Screw (M3 hexagon socket head screw) 30 Adjustable Actuator • After installing the actuator, open the door. Then adjust the actuator so that The actuator angle is adjustable (0˚ to 20˚) for hinged doors. its edge can be inserted properly into the entry slot of the safety switch. The minimum radius of the door opening can be as small as 100mm. • Recommended tightening torque: 0.8 N-m (approx. 8.0 kgf-cm) Actuator Angle Adjustment • After adjusting the actuator angle, apply loctite or the like to the adjustment screw to prevent it from loosening. • Using the screw (M3 hex socket head screw), the actuator angle can be adjusted (refer to the dimensional drawing). Adjustable angle: (0˚) to 20˚ • The larger the adjusted angle of the actuator, the smaller the applicable radius of the door opening. www.IDEC.com 286 R3.2 R3.2 ø5.4 ø5.4 ø5.4 2 20° AS-Interface Safety at Work Light Curtains Safety Control Relays Enabling Switches Interlock Switches XW Series E-Stops Overview 22 40 2 22 22 43 40 43 22 40 ±1.0 17.5 ±1.0 6.5 11 10 10 4.1 29.2 43 22 22 15 42 15 42 52 35 35 52 57 40 40 57 40 42 42 4.1 29.2 43 40 43 22 33 max. 40 12 (21) 43 1 42 10 22 10 42 29.2 44 15 52 58 15 52 72 57 35 35 57 40 40 58