Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices HW Series — 22mm IEC Style Global Pushbuttons Key features: • Locking lever removable contact blocks • Finger-safe IP20 contacts • Tamperproof construction • All E-stops meet EN60947-5-5, and are compliant with SEMI S2 standards • Worldwide approvals • Easy to assemble • Choice of black plastic or metallic front bezels • LED illumination • Transformer or full voltage • Slow make double break contacts HW: The Best Engineered Switch in the World IDEC’s HW switches are “The best engineered switch in the world” for a reason. Carrying the CE include illuminated and non-illuminated pushbuttons, pilot lights, selector switches, and mark, UL, CSA, CCC (Chinese), and TUV approvals, these switches are designed for use in almost emergency stop switches. any part of the world. All switches also incorporate mechanically keyed safety locking levers, ensuring correct Complete with finger-safe contact blocks offering IP20 protection, these 7/8” (22mm) switches installation and maintaining safety in high-vibration applications. Certificate No. Certificate No. File No. E68961 File No. LR21451 R50086203_HW_e-stop 2017010305987846 R50391189_HW Specifications AC-15: A600 or Ue = 250V, le = 3A (NO, NC, NO-EM, NC-LB) Rated Operational Characteristics DC-13: P600 or Ue = 125V, le = 1.1A (NO, NC) DC-13: Q600 or Ue = 125V, le = 0.9A (NO-EM, NC-LB) Rated Insulation Voltage 600V Rated Switching Over-Voltage Less than 4kV, conforming to IEC60947-1 Rated Impulse Withstanding Voltage 4kV for contact circuit, 2.5kV for lamp circuit Rated Thermal Current 10 Amp Minimum Switching Capacity 5 mA at 3V AC/DC Electrical Reliability MTBF < 1 fault for 10 million operation cycles (3V DC, 5mA) Lamp Ratings LEDs: 6V/17mA max, 12V & 24V/11mA max, 120 & 240V/10mA max Contact Operation Slow break NC or NO 5.5mm to 10mm travel to latch, 45N minimum force to latch Positive Action Operation 10mm maximum travel, 1,800 operations per hour maximum for a Pushlock Turn Reset (Emergency Stops with NC contacts) 900 operations per hour maximum for a Push-Pull Flush and extended pushbuttons—with 1NO or 1NC contact: 6.2±2N (momentary), 7.0±2N (maintained) Operating Force Additional contacts—1NO or 1NC: +3.2N (momentary), + 3.3N (maintained) Recommended Terminal Unit Wire Number of Wires Tightening Torque (Nm) Screw Crimping Terminal 2 1.0 to 1.3 ø0.5 to 1.6 mm (AWG14 to 22) 2 1.0 to 1.3 Solid Wire HW-U Contact Block ø1.7 to 2.0 mm (AWG12) 1 1.2 to 1.3 M3.5 Recommended Terminal Torque 2 0.3 to 2.0 mm (AWG14 to 22) 2 1.0 to 1.3 Stranded Wire 2 2.1 to 3.5 mm (AWG12) 1 1.2 to 1.3 Crimping Terminal Illuminated Unit (*1) Solid Wire ø0.5 to 1.6 mm (AWG14 to 22) 2 1.0 to 1.3 M3.5 Stranded Wire 0.3 to 2.0 mm (AWG14 to 22) Crimping Terminal 0.6 to 1.0 (M3.0) Applicable Wire Size Pilot Light Solid Wire ø0.5 to 1.6 mm (AWG14 to 22) 2 1.0 to 1.3 (M3.5) Stranded Wire ø0.3 to 2.0 mm (AWG14 to 22) 1. * refers to the lamp terminals of the illuminated push buttons and selector switches. Applicable Wire Size Minimum 1 x 22 AWG, max. 2 x 14 AWG or 1 x 12 AWG Contact Resistance Initial contact resistance of 50mΩ or less Contact Gap 4mm (NO and NC), 2mm (NO-EM and NC-LB) Horsepower Rating Reference Value: 1/4 HP @ 120V (1ø non-reversing), 1HP @ 240V (3ø non-reversing) Contact Material Silver (gold plated contacts available - contact IDEC) Operating Temperature Operation: –25 to +50°C (without freezing), Storage: –40 to +70°C (without freezing) 2 Vibration Resistance 10 to 55Hz, 98m/sec (10G) conforming to IEC6068-2-6 2 Shock Resistance 980m/sec (100G) conforming to IEC6068-2-7 Mechanical Life Momentary pushbuttons: 5,000,000 (900 operations per hour), All other switches: 500,000 1804091617 800-262-IDEC (4332) • USA & Canada 609 Mechanical Electrical ø22mm - HW Series Switches & Pilot Devices Conforming to Standards EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 No.14 CSA: pushbuttons and selector switches: A600 pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, File No. E68961 400/440, 480V) File No. LR92374 UL: pushbuttons and selector switches: A600 Approvals pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, 400/440, 480V) TÜV: pushbuttons and selector switches: A600=P600 (NO, NC)/Q600 (NO-EM, NC-LB) pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, Registration No. R9551089 (E-stops) Certificate No. 400/440, 480V) Registration No. R50054316 (Dual Pushbuttons) 2005010305145656 Registration No. J9650511 (Pilot Lights) Registration No. J9551458 (all other switches) Electric Shock Protection Class 2 conforming to IEC60664-7 1 Degree of Protection UL Type 1, 4X, 12, 13 (conforming to IEC60529 and UL50) IP65 (from front of the panel) IP20 (Type HW-U contact block) Pollution Degree (conforming to IEC60947-1) 3 External Short-Circuit Protection 10A 250V fuse conforming to IEC60269-1 Contact Block Type HW-U Rated Insulation Voltage 600V Pushbuttons Illuminated Pushbuttons Rated Continuous Current 10A Selector Switches Illuminated Selector Switches Pushbutton Selectors Contact Ratings by Utilization Category AC-15 (A600) IEC 60947-5-1 DC-13 (P600) Operational Voltage 24V 48V 50V 110V 220V 440V AC-12 Control of resistive loads & solid state 10A — 10A 10A 6A 2A loads AC 50/60 Hz AC-15 Control of electromagnetic loads (> 72VA) 10A — 7A 5A 3A 1A Operational Current DC-12 Control of resistive loads & solid state 10A 5A — 2.2A 1.1A — loads DC DC-13 Control of electromagnets 5A 2A — 1.1A 0.6A — For dimensions, see page 660. Note 1. Except HW2B LED Lamp Ratings (LSTD Type) Model LSTD-6N LSTD-1N LSTD-2N LSTD-H2N LSTD-M4N Lamp Base BA9S/13 Rated Voltage 6V AC/DC 12V AC/DC 24V AC/DC 120V AC 240V AC Voltage Range 6V AC/DC ±10% 12V AC/DC ±10% 24V AC/DC ±10% 120V AC ±5% 240V AC ±5% A, R, W: 17mA AC 11mA 11mA 10mA 10mA G, S: 8mA Current Draw A, R, W: 14mA DC 10mA 10mA – – G, S: 5.5mA Color Code A (amber), G (green), R (red), S (blue), W (white) Lamp Base Color Same as illumination color Voltage Marking Die stamped on the base In place of N, specify Life (reference value) Approx. 50,000 hours (The luminance reduces to 50% the initial intensity when used on complete DC.) the Lens/LED Color Code. A, R, W A, R, W Internal Circuit G, S LED Chip Protection Diode Zener Diode 1804091617 www.IDEC.com 610 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Characteristics Contact Ratings Standards & Approvals Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Non-Illuminated Round Pushbuttons (Assembled) Round Flush Round Extended Function Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Operator Only HW1B-M1-M HW4B-M1-M HW1B-M2-M HW4B-M2-M 1NO HW1B-M1F10-M HW4B-M1F10-M HW1B-M2F10-M HW4B-M2F10-M 1NC HW1B-M1F01-M HW4B-M1F01-M HW1B-M2F01-M HW4B-M2F01-M Momentary 1NO-1NC HW1B-M1F11-M HW4B-M1F11-M HW1B-M2F11-M HW4B-M2F11-M 2NO HW1B-M1F20-M HW4B-M1F20-M HW1B-M2F20-M HW4B-M2F20-M 2NC HW1B-M1F02-M HW4B-M1F02-M HW1B-M2F02-M HW4B-M2F02-M 2NO-2NC HW1B-M1F22-M HW4B-M1F22-M HW1B-M2F22-M HW4B-M2F22-M Operator Only HW1B-A1-M HW4B-A1-M HW1B-A2-M HW4B-A2-M 1NO HW1B-A1F10-M HW4B-A1F10-M HW1B-A2F10-M HW4B-A2F10-M 1NC HW1B-A1F01-M HW4B-A1F01-M HW1B-A2F01-M HW4B-A2F01-M Maintained 1NO-1NC HW1B-A1F11-M HW4B-A1F11-M HW1B-A2F11-M HW4B-A2F11-M 2NO HW1B-A1F20-M HW4B-A1F20-M HW1B-A2F20-M HW4B-A2F20-M 2NC HW1B-A1F02-M HW4B-A1F02-M HW1B-A2F02-M HW4B-A2F02-M 2NO-2NC HW1B-A1F22-M HW4B-A1F22-M HW1B-A2F22-M HW4B-A2F22-M 1. In place of M, specify the Button Color Code from table below. M Button Color Code 2. For nameplates and accessories, see page 655 and 658. Color Code 3. For dimensions, see page 660. 4. For contact assembly part numbers, see page 659. Black B 5. All assembled part numbers in catalog include standard, Finger-Safe (HW-U...) contacts. 6. Operator only models include operator plus button. Green G 7. Additional contact configurations available (up to 6 total contacts). Red R Blue S White W Yellow Y 1804091617 800-262-IDEC (4332) • USA & Canada 611 ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 B - M 1 F 10 – R Button Colors Bezel B: Black 1: Plastic Bezel G: Green 4: Metal Bezel Function Contact Arrangement R: Red Operator 10: 1NO 20: 2NO M: Momentary Action S: Blue 1: Flush Terminals A: Maintained Action 01: 1NC 02: 2NC W: White 2: Extended F: Finger-Safe Spring-Up 11: 1NO-NC 22: 2NO-2NC Y: Yellow Contacts Note: Use only for interpreting part numbers. Do not use for developing part numbers. Non-Illuminated Round Pushbuttons (Replacement Parts) Safety Anti-Rotation Contact Blocks + Mounting Adaptor + + + Operator + Button = Completed Unit Lever Lock Ring Contact Blocks Anti-Rotation Ring Buttons Style Contacts 1NO 1NC Style Part Number Style Part Number Round Flush Finger- HW-U10 HW-U01 Safe HW9Z-RL Spring-Up HW1A-B1-M HW-U10R HW-U01R Terminal (early make) (late break) Use with notched panel cutout to prevent unit rotation. Dummy Round Extended HW-DB Block Operators HW1A-B2-M Plastic Metal Contact Block Mounting Adaptor Style Bezel Bezel Style Part Number Round Flush/ 1. In place of M, specify the Extended Button Color Code from table. HW1B-M0 HW4B-MO HW-CB2C M Button Color Code Color Code Black B 1. Used to mount contact blocks to operator. HW1B-A0 HW4B-AO 2. IDEC strongly recommends using the safety lever Green G lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Red R Blue S White W Safety Lever Lock Yellow Y Style Part Number HW9Z-LS 1804091617 www.IDEC.com 612 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Maintained Momentary Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Non-Illuminated Mushroom Head Pushbuttons (Assembled) ø29mm Mushroom Head ø40mm Mushroom Head Function Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Operator Only HW1B-M3-M HW4B-M3-M HW1B-M4-M HW4B-M4-M 1NO HW1B-M3F10-M HW4B-M3F10-M HW1B-M4F10-M HW4B-M4F10-M 1NC HW1B-M3F01-M HW4B-M3F01-M HW1B-M4F01-M HW4B-M4F01-M Momentary 1NO-1NC HW1B-M3F11-M HW4B-M3F11-M HW1B-M4F11-M HW4B-M4F11-M 2NO HW1B-M3F20-M HW4B-M3F20-M HW1B-M4F20-M HW4B-M4F20-M 2NC HW1B-M3F02-M HW4B-M3F02-M HW1B-M4F02-M HW4B-M4F02-M 2NO-2NC HW1B-M3F22-M HW4B-M3F22-M HW1B-M4F22-M HW4B-M4F22-M Operator Only HW1B-A3-M HW4B-A3-M HW1B-A4-M HW4B-A4-M 1NO HW1B-A3F10-M HW4B-A3F10-M HW1B-A4F10-M HW4B-A4F10-M 1NC HW1B-A3F01-M HW4B-A3F01-M HW1B-A4F01-M HW4B-A4F01-M Maintained 1NO-1NC HW1B-A3F11-M HW4B-A3F11-M HW1B-A4F11-M HW4B-A4F11-M 2NO HW1B-A3F20-M HW4B-A3F20-M HW1B-A4F20-M HW4B-A4F20-M 2NC HW1B-A3F02-M HW4B-A3F02-M HW1B-A4F02-M HW4B-A4F02-M 2NO-2NC HW1B-A3F22-M HW4B-A3F22-M HW1B-A4F22-M HW4B-A4F22-M 1. In place of M, specify the Button Color Code from table. M Button Color Code 2. *60mm mushroom available only in red, green, black, and yellow. Color Code 3. For nameplates and accessories, see page 655 and 658. 4. For dimensions, see page 660. Black B 5. For contact assembly part numbers, see page 659. ø60mm Mushroom Head 6. All assembled part numbers in catalog include standard spring-up Green G Finger-Safe (HW-U...) contacts. Function Contacts Plastic Bezel Red R 7. Operator only models include operator plus button. Operator Only HW1B-M5-M* 8. Additional contact configurations available (up to 6 total contacts). Blue S 1NO HW1B-M5F10-M* White W 1NC HW1B-M5F01-M* Yellow Y Momentary 1NO-1NC HW1B-M5F11-M* 2NO HW1B-M5F20-M* 2NC HW1B-M5F02-M* 2NO-2NC HW1B-M5F22-M* 1804091617 800-262-IDEC (4332) • USA & Canada 613 ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 B - M 3 F 10 – R Button Colors Bezel B: Black 1: Plastic Bezel Contact Arrangement G: Green 4: Metal Bezel Function 10: 1NO 20: 2NO R: Red (Not available for 60mm Operator M: Momentary Action 01: 1NC 02: 2NC mushroom) S: Blue 3: ø29mm Mushroom A: Maintained Action 11: 1NO-NC 22: 2NO-2NC Terminals W: White (Not available for 60mm jumbo 4: ø40mm Mushroom F: Finger-Safe Spring-Up mushroom pushbutton.) Y: Yellow 5: ø60mm Mushroom Contacts Note: Use only for interpreting part numbers. Do not use for developing part numbers. Non-Illuminated Mushroom Head Pushbuttons (Replacement Parts) Mounting Safety Lever Anti-Rotation Contact Blocks + + + + Operator + Button = Completed Unit Adaptor Lock Ring Contact Blocks Safety Lever Lock Buttons Style Contacts 1NO 1NC Style Part Number Style Part Number ø29mm Finger- HW-U10 HW-U01 Mushroom Cap HW9Z-LS Safe Spring-Up HW-U10R HW-U01R HW1A-B3-M Terminal (early make) (late break) Anti-Rotation Ring Appearance Part Number Dummy HW-DB Block ø40mm Mushroom Cap HW9Z-RL Contact Block Mounting Adaptor HW1A-B4-M Style Part Number Operators Metal Style Plastic Bezel Bezel 1. In place of M, specify the Button HW-CB2C ø29mm Mushroom Color Code from table. ø40mm Mushroom HW1B-M0L HW4B-MOL M Button Color Code 1. Used to mount contact blocks to operator. Color Code Color Code 2. IDEC strongly recommends using the safety lever lock to prevent heavy Black B Blue S vibration or maintenance personnel from inadvertently unlocking contacts. Green G White W HW1B-A0L HW4B-AOL Red R Yellow Y HW1B-M5 available only in black, red, green and yellow. Ø60mm Jumbo Mushroom – HW1B-M5-M* 1. *60mm mushroom operator includes non-removable button (available in red, black, green and yellow only). 2. For nameplates and accessories, see page 655 and 658. 3. For dimensions, see page 660. 1804091617 www.IDEC.com 614 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Momentary Maintained Momentary Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Non-Illuminated Square Pushbuttons (Assembled) Square Flush Square Extended Function Contacts Plastic Bezel Plastic Bezel Operator Only HW2B-M1-M HW2B-M2-M 1NO HW2B-M1F10-M HW2B-M2F10-M 1NC HW2B-M1F01-M HW2B-M2F01-M Momentary 1NO-1NC HW2B-M1F11-M HW2B-M2F11-M 2NO HW2B-M1F20-M HW2B-M2F20-M 2NC HW2B-M1F02-M HW2B-M2F02-M 2NO-2NC HW2B-M1F22-M HW2B-M2F22-M Operator Only HW2B-A1-M HW2B-A2-M 1NO HW2B-A1F10-M HW2B-A2F10-M 1NC HW2B-A1F01-M HW2B-A2F01-M Maintained 1NO-1NC HW2B-A1F11-M HW2B-A2F11-M 2NO HW2B-A1F20-M HW2B-A2F20-M 2NC HW2B-A1F02-M HW2B-A2F02-M 2NO-2NC HW2B-A1F22-M HW2B-A2F22-M 1. In place of M, specify the Button Color Code from table. M Button Color Code 2. For nameplates and accessories, see page 655 and 658. Color Code 3. For dimensions, see page 660. 4. For contact assembly part numbers, see page 659. Black B 5. Square pushbuttons available in plastic bezel only. Green G 6. All assembled part numbers in catalog include finger-safe spring-up (HW-U...) contacts. Red R 7. Operator only model includes operator and button. 8. Additional contact configurations available (up to 6 total contacts). Blue S White W Yellow Y 1804091617 800-262-IDEC (4332) • USA & Canada 615 ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 2 B - M 1 F 10 – R Button Colors Function B: Black G: Green M: Momentary Action Contact Arrangement Operator A: Maintained Action R: Red 10: 1NO 20: 2NO 1: Flush S: Blue Terminals 01: 1NC 02: 2NC 2: Extended W: White F: Finger-Safe Spring-Up Contacts 11: 1NO-NC 22: 2NO-2NC Y: Yellow Note: Use only for interpreting part numbers. Do not use for developing part numbers. Non-Illuminated Square Pushbuttons (Replacement Parts) Mounting Safety Anti-Rotation Contact Blocks + + + + Operator + Button = Completed Unit Adaptor Lever Lock Ring Contact Blocks Safety Lever Lock Buttons Style Contacts 1NO 1NC Style Part Number Style Part Number Square Flush Finger- HW-U10 HW-U01 HW9Z-LS Safe Spring-Up HW2A-B1-M HW-U10R HW-U01R Terminal (early make) (late break) Anti-Rotation Ring Dummy Square Extended HW-DB Appearance Part Number Block HW2A-B2-M HW9Z-RL Contact Block Mounting Adaptor Style Part Number Use with notched panel cutout to 1. In place of M, specify the Button prevent unit rotation. Color Code from table. HW-CB2C M Button Color Code Operators Color Code Color Code Plastic Style Bezel Black B Blue S 1. Used to mount contact blocks to operator. Green G White W 2. IDEC strongly recommends using the safety Square Flush lever lock to prevent heavy vibration or Red R Yellow Y HW2B-M0 Extended maintenance personnel from inadvertently unlocking contacts. HW2B-A0 2. For nameplates and accessories, see pages 655 and 658. 3. For dimensions, see page 660. 1804091617 www.IDEC.com 616 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Maintained Momentary Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Non-Illuminated E-Stop Pushbuttons (Assembled) Ø29mm Head Pushlock Turn Reset Ø40mm Head Pushlock Turn Reset Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Operator Only HW1B-V3M† HW4B-V3M† HW1B-V4M† HW4B-V4M† 1NO HW1B-V3F10-M† HW4B-V3F10-M† HW1B-V4F10-M† HW4B-V4F10-M† 1NC HW1B-V3F01-M† HW4B-V3F01-M† HW1B-V4F01-M† HW4B-V4F01-M† 1NO-1NC HW1B-V3F11-M† HW4B-V3F11-M† HW1B-V4F11-M† HW4B-V4F11-M† 2NO HW1B-V3F20-M† HW4B-V3F20-M† HW1B-V4F20-M† HW4B-V4F20-M† 2NC HW1B-V3F02-M† HW4B-V3F02-M† HW1B-V4F02-M† HW4B-V4F02-M† Ø40mm Head EMO Pushlock Turn Reset Ø40mm Head Pushlock Key Reset Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Operator Only HW1B-V4R-EMO-2* HW4B-V4R-EMO-2* HW1B-X4R* HW4B-X4R* 1NO HW1B-V4F10-R-EMO-2* HW4B-V4F10-R-EMO-2* HW1B-X4F10-R* HW4B-X4F10-R* 1NC HW1B-V4F01-R-EMO-2* HW4B-V4F01-R-EMO-2* HW1B-X4F01-R* HW4B-X4F01-R* 1NO-1NC HW1B-V4F11-R-EMO-2* HW4B-V4F11-R-EMO-2* HW1B-X4F11-R* HW4B-X4F11-R* 2NO HW1B-V4F20-R-EMO-2* HW4B-V4F20-R-EMO-2* HW1B-X4F20-R* HW4B-X4F20-R* 2NC HW1B-V4F02-R-EMO-2* HW4B-V4F02-R-EMO-2* HW1B-X4F02-R* HW4B-X4F02-R* 1. * Available in Red only. 2. † Available in red or yellow. Insert color code in place of M (R: Red, Y: Yellow). 2. For accessories, see page 658. 3. For dimensions, see page 660. 5. For nameplates and shrouds, see page 659. 4. For contact assembly part numbers, see page 659. ø60mm Head Pushlock Turn Reset 7. All HW series E-stops comply with EN60947-5-5, the IEC “E-Stop Addendum to the Low Voltage Directive,” this includes “tamper proof” operation whereby a change of contact state Contacts Plastic Bezel is not possible by “teasing” or “floating” the operator. Operator Only HW1B-V5R* 8. All assembled part numbers in catalog include standard finger-safe spring-up (HW-U...) contacts. 1NO HW1B-V5F10-R* 9. Operator only models include operator and button. 10. Additional contact configurations available (up to 6 total contacts). 1NC HW1B-V5F01-R* 1NO-1NC HW1B-V5F11-R* 2NO HW1B-V5F20-R* 2NC HW1B-V5F02-R* 1804091617 800-262-IDEC (4332) • USA & Canada 617 ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 B – V 3 F 10 – R – EMO-2 Engraved Button* Bezel EMO-2: EMO switch 1: Plastic Bezel *Option available for red 4: Metal Bezel EMO E-Stop only Function (not available for 60mm Operator V: Pushlock Turn Reset Button Colors jumbo mushroom) 3: ø29mm Head X: Pushlock Key Reset Contact Arrangement R: Red 4: ø40mm Head Terminals 10: 1NO 20: 2NO Y: Yellow 5: ø60mm Head F: Finger-Safe 01: 1NC 02: 2NC Note: some switches only Note: Use only for interpreting part numbers. available in red. Spring-Up 11: 1NO-NC 22: 2NO-2NC Do not use for developing part numbers. Non-Illuminated E-Stop Pushbuttons (Replacement Parts) Safety Lever Anti-Rotation Contact Blocks + Mounting Adaptor + + + Operator = Completed Unit Lock Ring Contact Blocks Safety Lever Lock Anti-Rotation Ring Style Contacts 1NO 1NC Style Part Number Appearance Part Number Finger- HW-U10 HW-U01 HW9Z-LS Safe HW9Z-RL Spring-Up HW-U10R HW-U01R Terminal (early make) (late break) Use with notched panel cutout to prevent unit rotation. Dummy Operators HW-DB Block Style Plastic Metal ø29mm Head Pushlock Turn Reset red HW1B-V3R HW4B-V3R Contact Block Mounting Adaptor Style Part Number yellow HW1B-V3Y HW4B-V3Y ø40mm Head Pushlock Turn Reset red HW1B-V4R HW4B-V4R HW-CB2C yellow HW1B-V4Y HW4B-V4Y ø40mm Head EMO Pushlock Turn Reset* 1. Used to mount contact blocks to operator. 2. IDEC strongly recommends using the safety lever lock to prevent heavy HW1B-V4R-EMO-2 HW4B-V4R-EMO-2 vibration or maintenance personnel from inadvertently unlocking contacts. ø40mm Head Pushlock Key Reset* HW1B-X4R HW4B-X4R ø60mm Head Pushlock Turn Reset* HW1B-V5R – Note: Determine mounting centers to 1. *Available in red only. 2. All E-Stop buttons are not removable ensure proper spacing. from the operator. 1804091617 www.IDEC.com 618 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Push Pull & Unibody E-Stop Pushbuttons (Assembled) ø40mm Unibody Pushlock Turn Reset* ø40mm Head Push–Pull Contacts Plastic Bezel Contacts Plastic Bezel Metal Bezel 1NO-1NC HW1E-BV4F11-R Operator Only (Red) HW1B-Y2R HW4B-Y2R Operator Only (Yellow) HW1B-Y2Y HW4B-Y2Y 2NC HW1E-BV4F02-R 1NO HW1B-Y2F10-M† HW4B-Y2F10-M† 1NO-2NC* HW1E-BV412R-TK2093-1 1NC HW1B-Y2F01-M† HW4B-Y2F01-M† * NO contact is used as a monitoring contact 1NO-1NC HW1B-Y2F11-M† HW4B-Y2F11-M† 2NC HW1B-Y2F02-M† HW4B-Y2F02-M† 2NO HW1B-Y2F20-M† HW4B-Y2F20-M† O Full Voltage LED Terminal Numbering Code (Unibody only) Models Terminal Number Voltage Code Unibody Illuminated E-Stops* 1NO-1NC NO = 13/14, NC = 11/12 6VAC/DC 6V 2NC NC = 11/12, NC = 21/22 12VAC/DC 12V Contacts LED 24VAC/DC 24V HW1E-L 1NO-1NC HW1E-LV4F11QD-R-O LED + = X2, LED - = X1 HW1E-T 120V AC 120V 2NC HW1E-LV4F02QD-R-O 240V AC 240V 2NC (with push-on HW1E-TV4F02QD-R-O illumination) 1NO-1NC (with push-on HW1E-TV4F11QD-R-O illumination ) 1. * Available in Red only. 2. † Available in red or yellow. Insert color code in place of M (R: Red, Y: Yellow). 3. In place of O, specify Full Voltage LED Code. 4. With single unit construction, the positive action contacts are integrated in the body of the switch. This provides an extra degree of safety and reliability for critical emergency stop functions. 5. In the illuminated version, the light is independent of the switch action (except push-on LED model). 6. For accessories, see page 658. 7. For dimensions, see page 660. 8. For nameplates and shrouds, see page 658. 9. For contact assembly part numbers, see page 658. 10. All HW Series E-Stop operators include non-removable color caps. 11. All HW series E-Stops comply with EN60947-5-5, the IEC “E-Stop Addendum to the Low Voltage Directive,” this includes “tamper proof” operation whereby a change of contact state is not possible by “teasing” or “floating” the operator. 12. All HW series E-Stop switches comply with SEMI S2 standards. 13. All assembled part numbers in catalog include standard finger-safe spring-up (HW-U...) contacts. 14. Additional contact configurations available (up to 6 total contacts). 1804091617 800-262-IDEC (4332) • USA & Canada 619 ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 E – L V 4 F 11 – Q D – R – 24V Bezel Full Voltage Code 1: Plastic Bezel Button Colors (Illuminated E-Stop) Function 4: Metal Bezel* R: Red 6V: 6V AC/DC Lamp Code B: Push Pull (*not available for Y: Yellow* 12V: 12V AC/DC D: LED HW1E unibody) E: Unibody Pushlock Turn Reset (*only available in 24V: 24V AC/DC 40mm Push Pull Illumination 120V: 120VC AC E-Stop) Contacts BV4: Non-illuminated (unibody style) 240V: 240V AC 11: 1NO-1NC LV4: Illuminated (unibody style) Illumination Circuit 02: 2NC TV4: Illuminated Push On (unibody style) blank: 40mm Push Pull & Non-illuminated Unibody E-Stop 10: 1NO Y2: Non-illuminated Push Pull E-Stop Q: Illuminated Unibody E-Stop 20: 2NO Note: Use only for interpreting part numbers. Do not use for developing part numbers. Illuminated & Non-Illuminated E-Stop Pushbuttons (Replacement Parts) Safety Lever Anti-Rotation Contact Blocks + Mounting Adaptor + + + Operator = Completed Unit Lock Ring Contact Blocks Contact Block Mounting Adaptor Anti-Rotation Ring Style Contacts 1NO 1NC Style Part Number Appearance Part Number Finger- HW-U10 HW-U01 Safe HW9Z-RL Spring-Up HW-U10R HW-U01R HW-CB2C Terminal (early make) (late break) Use with notched panel cutout to prevent unit rotation. Dummy 1. Used to mount contact blocks to operator. HW-DB Block 2. IDEC strongly recommends using the Operators safety lever lock to prevent heavy vibration or maintenance personnel from Style Part Number 1. There are no replacement parts for the HW1E unibody E-Stop. inadvertently unlocking contacts. ø40mm Head 2. For illuminated unibody E-Stop, see page 659 for replacement lens. Plastic HW1B-Y2R Push-Pull Safety Lever Lock Metal HW4B-Y2R Style Part Number Plastic HW1B-Y2Y HW9Z-LS Metal HW4B-Y2Y All E- Stop Buttons are not removable from the operator. 1804091617 www.IDEC.com 620 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices yellow red Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices E-Stop Stations 29mm Pushlock Turn Reset 40mm Pushlock Turn Reset Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel 1NO-1NC FB1W-HW1B-V311R FB1W-HW4B-V311R FB1W-HW1B-V411R FB1W-HW4B-V411R 2NC FB1W-HW1B-V302R FB1W-HW4B-V302R FB1W-HW1B-V402R FB1W-HW4B-V402R 40mm Push-Pull Reset 40mm Pushlock Key Reset Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel 1NO-1NC FB1W-HW1B-Y211R FB1W-HW4B-Y211R FB1W-HW1B-X411R FB1W-HW4B-X411R 2NC FB1W-HW1B-Y202R FB1W-HW4B-Y202R FB1W-HW1B-X402R FB1W-HW4B-X402R 40mm EMO Pushlock Turn Reset Contacts Plastic Bezel Metal Bezel 1NO-1NC FB1W-HW1B-V411R-EMO-2 FB1W-HW4B-V411R-EMO-2 2NC FB1W-HW1B-V402R-EMO-2 FB1W-HW4B-V402R-EMO-2 1. Maximum of two contact blocks. 2. Box is supplied with yellow top and black bottom only. 1804091617 800-262-IDEC (4332) • USA & Canada 621 ø22mm - HW Series Switches & Pilot Devices Jumbo Dome Pilot Lights Actual Size Plastic Bezel Operator Only HW1P-5Q0 LED Full Voltage HW1P-5Q4-N 24V AC/DC 1. In place of N, specify the Lens/LED Color Code. 2. Spring-Up terminals with 24V LED. 3. For nameplates and accessories, see page 655 and 658. 4. For dimensions, see page 660. N Lens/LED Color Code Color Code Amber A Green G Red R Blue S White W Yellow Y Jumbo Dome Replacement Parts Item Appearance Description Part Number Lens HW1A-P5N Polycarbonate Lens LED Diffusing HW9Z-PP5C Lens Jumbo Dome LED Lamps LED Lamp LSTDB-2N 1. In place of N, specify the Lens/LED Color Code. 2 . Use white LED for yellow lens. Lamp Ratings Part Operating Rated Power Number Voltage Current Consumption LED LSTDB-2 24V AC/DC ±10% 15mA 0.36W 1804091617 www.IDEC.com 622 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Jumbo Dome Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Pilot Lights (Assembled) Round Flush Dome Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Operator Only HW1P-1FQ0-N HW4P-1FQ0-N HW1P-2FQ0-N HW4P-2FQ0-N Full Voltage HW1P-1FQD-N-O HW4P-1FQD-N-O HW1P-2FQD-N-O HW4P-2FQD-N-O 120V AC HW1P-1FH2D-N HW4P-1FH2D-N HW1P-2FH2D-N HW4P-2FH2D-N Transformer 240V AC HW1P-1FM4D-N HW4P-1FM4D-N HW1P-2FM4D-N HW4P-2FM4D-N 480V AC HW1P-1FT8D-N HW4P-1FT8D-N HW1P-2FT8D-N HW4P-2FT8D-N DC-DC Converter* 110V DC – – HW1P-1D2D-N HW1P-2D2D-N Square Flush Plastic Bezel Operator Only HW2P-1FQ0-N Full Voltage HW2P-1FQD-N-O 120V AC HW2P-1FH2D-N Transformer 240V AC HW2P-1FM4D-N 480V AC HW2P-1FT8D-N DC-DC Converter* 110V DC HW2P-1D2D-N * DC-DC converter voltage input from 90-140V DC. 1. In place of N, specify the Lens/LED Color Code from table below. N Lens/LED Color Code O LED Full Voltage Code 2. In place of Ospecify the Full Voltage Code from table below. Color Code Voltage Code 3. For nameplates and accessories, see page 655 and 658. Amber A 6VAC/DC 6V 4. For dimensions, see page 660. 5. Pilot lights do not come with anti-rotation ring. Green G 12VAC/DC 12V 6. Operator models come with operator and lens. 7. Yellow pilot light comes with white LED. Red R 24VAC/DC 24V Blue S 120V AC 120V White W 240V AC 240V Yellow Y 1804091617 800-262-IDEC (4332) • USA & Canada 623 ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 P – 2 F Q D – R – 12V LED Voltage Bezel (full voltage units only) 1: Round Plastic Operator 6V: 6V AC/DC 2: Square Plastic Illumination Circuit 1: Flush Lens/LED Colors 12V: 12V AC/DC 4: Round Metal Q: Full Voltage 2: Dome A: Amber 24V: 24V AC/DC Lamp Type Code H2: 120V AC Transformer G: Green 120V: 120V AC D: LED M4: 240V AC Transformer R: Red 240V: 240V AC T8: 480V AC Transformer S: Blue D2: DC-DC Converter W: White Note: Use only for interpreting part numbers. Y: Yellow Do not use for developing part numbers. Pilot Lights (Replacement Parts) Transformer* + LED + Operator + Lens = Completed Unit (not applicable for full voltage units) Transformer Units Operators Style Voltage Part Number Style Type Plastic Bezel Metal Bezel LED 120V AC HW-FH20 Full Voltage Finger-Safe HW1P-1FQ0 HW4P-1FQ0 Round Flush 240V AC HW-FM40 Finger-Safe HW1P-10 HW4P-10 480V AC HW-FT80 Transformer Used for DC-DC HW1P-100 - convertor only † 110V DC HW-RD0* Dome Full Voltage Finger-Safe HW1P-2FQ0 HW4P-2FQ0 (6V secondary voltage) 1. *DC-DC convertor can only be used with HW1P-100 Transformer Finger-Safe HW1P-20 HW4P-20 and HW2P-100 operators † 2. DC-DC converter voltage input from 90-140V DC. Square Flush Full Voltage Finger-Safe HW2P-1FQ0 – Finger-Safe HW2P-10 – LED Lamps Transformer Used for DC-DC Style Voltage Part Number HW2P-100 – convertor only 6V AC/DC LSTD-6N LED 1. Transformer type requires separate transformer & LED. Must select correct transformer bases. Use 6V LEDs. 12V AC/DC LSTD-1N 2. Full voltage type only requires LED. 24V AC/DC LSTD-2N Lenses O Lens Color Code 120V AC LSTD-H2N Style Part Number Color Code 240V AC LSTD-M4N Amber A 1. In place of N, specify the LED Color Code. Round/ Green G 2. The LED contains a current-limiting resistor HW1A-P1-O Flush and reverse polarity protection diodes. Red R N LED Color Code Blue S White W Color Code Color Code Dome HW1A-P2-O Amber A Blue S Yellow Y Green G White W For yellow lens use white LED. Red R Square/ For yellow lens use white LED. HW2A-P1-O Flush In place of O, specify the Lens Color Code. 1804091617 www.IDEC.com 624 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Illuminated Round Pushbuttons (Assembled) Illuminated Full Voltage Pushbuttons Flush Extended Extended w/ Full Shroud Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Operator Only HW1L-M1-N HW4L-M1-N HW1L-M2-N HW4L-M2-N HW1L-MF2-N HW4L-MF2-N 1NO HW1L-M1F10QD-N-O HW4L-M1F10QD-N-O HW1L-M2F10QD-N-O HW4L-M2F10QD-N-O HW1L-MF2F10QD-N-O HW4L-MF2F10QD-N-O 1NC HW1L-M1F01QD-N-O HW4L-M1F01QD-N-O HW1L-M2F01QD-N-O HW4L-M2F01QD-N-O HW1L-MF2F01QD-N-O HW4L-MF2F01QD-N-O 1NO-1NC HW1L-M1F11QD-N-O HW4L-M1F11QD-N-O HW1L-M2F11QD-N-O HW4L-M2F11QD-N-O HW1L-MF2F11QD-N-O HW4L-MF2F11QD-N-O 2NO HW1L-M1F20QD-N-O HW4L-M1F20QD-N-O HW1L-M2F20QD-N-O HW4L-M2F20QD-N-O HW1L-MF2F20QD-N-O HW4L-MF2F20QD-N-O Operator Only HW1L-A1-N HW4L-A1-N HW1L-A2-N HW4L-A2-N HW1L-AF2-N HW4L-AF2-N 1NO HW1L-A1F10QD-N-O HW4L-A1F10QD-N-O HW1L-A2F10QD-N-O HW4L-A2F10QD-N-O HW1L-AF2F10QD-N-O HW4L-AF2F10QD-N-O 1NC HW1L-A1F01QD-N-O HW4L-A1F01QD-N-O HW1L-A2F01QD-N-O HW4L-A2F01QD-N-O HW1L-AF2F01QD-N-O HW4L-AF2F01QD-N-O 1NO-1NC HW1L-A1F11QD-N-O HW4L-A1F11QD-N-O HW1L-A2F11QD-N-O HW4L-A2F11QD-N-O HW1L-AF2F11QD-N-O HW4L-AF2F11QD-N-O 2NO HW1L-A1F20QD-N-O HW4L-A1F20QD-N-O HW1L-A2F20QD-N-O HW4L-A2F20QD-N-O HW1L-AF2F20QD-N-O HW4L-AF2F20QD-N-O Illuminated Transformer Pushbuttons Flush Extended Extended w/ Full Shroud Contacts Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Plastic Bezel Metal Bezel Operator Only HW1L-M1-N HW4L-M1-N HW1L-M2-N HW4L-M2-N HW1L-MF2-N HW4L-MF2-N 1NO-1NC HW1L-M1F11-OD-N HW4L-M1F11-OD-N HW1L-M2F11-OD-N HW4L-M2F11-OD-N HW1L-MF2F11-OD-N HW4L-MF2F11-OD-N 2NO HW1L-M1F20-OD-N HW4L-M1F20-OD-N HW1L-M2F20-OD-N HW4L-M2F20-OD-N HW1L-MF2F20-OD-N HW4L-MF2F20-OD-N Operator Only HW1L-A1-N HW4L-A1-N HW1L-A2-N HW4L-A2-N HW1L-AF2-N HW4L-AF2-N 1NO-1NC HW1L-A1F11-OD-N HW4L-A1F11-OD-N HW1L-A2F11-OD-N HW4L-A2F11-OD-N HW1L-AF2F11-OD-N HW4L-AF2F11-OD-N 2NO HW1L-A1F20-OD-N HW4L-A1F20-OD-N HW1L-A2F20-OD-N HW4L-A2F20-OD-N HW1L-AF2F20-OD-N HW4L-AF2F20-OD-N 1. In place of N, specify Lens/LED Color Code from N Lens/LED Color Code O Voltage Code table. Color Code Full Voltage Transformer 2. In place of Ospecify Voltage Code from table. Models Models 3. Light independent of switch position. Amber A 4. For replacement part numbers, see page 626. Voltage Code Voltage Code Green G 5. For nameplates and accessories, see page 655. 6V AC/DC 6V 120V AC H2 and 658. Red R 6. For dimensions, see page 660. 12V AC/DC 12V 240V AC M4 7. For contact assembly part numbers, see page 659. Blue S 8. Full voltage and transformer models use the same 24V AC/DC 24V 480V AC T8 White W operator. 120V AC 120V 9. Additional contact configurations available (up to 6 Yellow Y total contacts). 240V AC 240V Yellow LED not available. Use 10. Yellow pushbutton comes with white LED. white LED for yellow lens. 1804091617 800-262-IDEC (4332) • USA & Canada 625 Maintained Momentary Maintained Momentary ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 L – M 1F 10 Q D – G – 12V LED Lamp Voltage Bezel (full voltage units only) Function 1: Plastic Lens Color Operator 6V: 6V AC/DC M: Momentary A: Amber S: Blue 4: Metal Contact Arrangement 1F: Flush 12V: 12V AC/DC A: Maintained G: Green W: White 10: 1NO 2F: Extended 24V: 24V AC/DC R: Red Y: Yellow Illumination Circuit 01: 1NC F2F: Extended 120V: 120VC AC Q: Full Voltage w/ shroud 11: 1NO-1NC 240V: 240V AC H2: Transformer 120V AC 20: 2NO M4: Transformer 240V AC Note: Use only for interpreting part numbers. T8: Transformer 480V AC Do not use for developing part numbers. Illuminated Round Pushbuttons (Replacement Parts) Contact Lead Mounting Safety Anti-Rotation Completed Transformer* + + + + + Lamp + + Operator + Lens = Blocks Holder Adaptor Lever Lock Ring Unit *Transformer not needed with full voltage models. Lamp Circuit Components Contact Blocks Style Contacts 1NO 1NC Style Description Terminals Part Number For use with HW-CBL on all Lead Holder illuminated pushbutton units. Finger-Safe HW-LH3 HW-U10 HW-U01 One required for each deck Spring-Up HW-U10R (early make) HW-U01R (late break) (pair) of contacts. Terminal Dummy Block with Full Voltage Adaptor For use with 1. All assembled part numbers in catalog include standard finger-safe spring-up (HW-U...) odd number of Finger-Safe HW-DA1FBN contacts. contacts. . Full Voltage Adaptor Contact Block Mounting Adaptor Anti-Rotation Ring For use with Style Part Number Part even number of Finger-Safe TW-DA1FB Appearance Number contacts. HW-CBL Transformer Unit HW9Z-RL (6V secondary voltage) 1. Used to mount contact blocks to operator 120VAC TW-F126B Use with notched panel cutout to prevent (first pair only). 240VAC Finger-Safe TW-F246B unit rotation. 2. IDEC strongly recommends using the safety 480VAC TW-F486B lever lock to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. LED Lamps Safety Lever Lock Style Voltage Part Number DC-DC Converter 110VDC HW-L16D Style Part Number 1. *With spring-up terminals - to use spring-up terminal type, must use 6V AC/DC LSTD-6N transformer type operator designed for spring-up transformer. 12V AC/DC LSTD-1N HW9Z-LS LED 2. ** DC-DC converter voltage input from 90-140V DC. 24V AC/DC LSTD-2N Operators Lenses 120V AC LSTD-H2N Plastic Metal Style Style Part Number Bezel Bezel 240V AC LSTD-M4N Round Flush Momentary HW1L-M0 HW4L-M0 Round Flush/ 1. In place of N, specify the LED Color Code. HW1A-L1-N 2. The LED contains a current-limiting resistor Extended Maintained HW1L-A0 HW4L-A0 and reverse polarity protection diodes. 3. Yellow LED not available, use white LED Momentary HW1L-MF0 HW4L-MF0 Round Extended Extended with when using yellow lens. HW1A-L2-N Full Shroud Maintained HW1L-AF0 HW4L-AF0 In place of N, specify the Lens Color Code from previous page. 1804091617 www.IDEC.com 626 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Illuminated Mushroom & Square Pushbuttons (Assembled) 40mm Mushroom Head Square Flush Contacts Plastic Bezel Metal Bezel Plastic Bezel † Operator Only HW1L-M4-N HW4L-M4-N HW2L-M1-N 1NO HW1L-M4F10QD-N-O HW4L-M4F10QD-N-O HW2L-M1F10QD-N-O Momentary 1NC HW1L-M4F01QD-N-O HW4L-M4F01QD-N-O HW2L-M1F01QD-N-O 1NO-1NC HW1L-M4F11QD-N-O HW4L-M4F11QD-N-O HW2L-M1F11QD-N-O 2NO HW1L-M4F20QD-N-O HW4L-M4F20QD-N-O HW2L-M1F20QD-N-O † Operator Only HW1L-A4-N HW4L-A4-N HW2L-A1-N 1NO HW1L-A4F10QD-N-O HW4L-A4F10QD-N-O HW2L-A1F10QD-N-O Maintained 1NC HW1L-A4F01QD-N-O HW4L-A4F01QD-N-O HW2L-A1F01QD-N-O 1NO-1NC HW1L-A4F11QD-N-O HW4L-A4F11QD-N-O HW2L-A1F11QD-N-O 2NO HW1L-A4F20QD-N-O HW4L-A4F20QD-N-O HW2L-A1F20QD-N-O 1NO-1NC HW1L-M4F11OD-N HW4L-M4F11OD-N HW2L-M1F11OD-N Momentary 2NO HW1L-M4F20OD-N HW4L-M4F20OD-N HW2L-M1F20OD-N 1NO-1NC HW1L-A4F11OD-N HW4L-A4F11OD-N HW2L-A1F11OD-N Maintained 2NO HW1L-A4F20OD-N HW4L-A4F20OD-N HW2L-A1F20OD-N † 1. Full voltage and transformer units use the same N Lens/LED Color Code O Voltage Code operator. Color Code Full Voltage Transformer 2. In place of N, specify the Lens/LED Color Code Models Models from table. Amber A 3. In place of Ospecify the Voltage Code from Voltage Code Voltage Code Green G table. 6V AC/DC 6V 120V AC H2 4. Light independent of switch position Red R 5. For nameplates and accessories, see page 655. 12V AC/DC 12V 240V AC M4 Blue S and 658. 6. For dimensions, see page 660. 24V AC/DC 24V 480V AC T8 White W 7. For contact assembly part numbers, see page 120V AC 120V 659. Yellow Y* 8. Additional contact configurations available (up to 240V AC 240V 1. *40mm mushroom lenses 6 total contacts). not available in yellow. 9. Yellow pushbutton comes with white LED. 2. Yellow LED not available. Use white LED for yellow lens. 1804091617 800-262-IDEC (4332) • USA & Canada 627 Transformer Full Voltage ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 L – M 1 F 10 Q D – G – 12V Voltage Bezel (full voltage units only) 1: Round Plastic Function Lens Color 6V: 6V AC/DC 2: Square Plastic M: Momentary Operator A: Amber S: Blue 12V: 12V AC/DC 4: Round Metal A: Maintained 1: Square Flush Contact Arrangement G: Green W: White 24V: 24V AC/DC 4: Mushroom 10: 1NO Illumination Circuit R: Red Y: Yellow 120V: 120VC AC 01: 1NC Q: Full Voltage 240V: 240V AC 11: 1NO-1NC H2: Transformer 120V AC 20: 2NO M4: Transformer 240V AC Note: Use only for interpreting part numbers. Do not use for developing part numbers. T8: Transformer 480V AC Illuminated Mushroom & Square Pushbuttons (Replacement Parts) Contact Lead Safety Anti-Rotation Completed † Transformer* + + + Adaptor + + LED + + Operator + Lens = Blocks Holder Lever Lock Ring Unit *Transformer not needed with full voltage models. Lamp Circuit Components Contact Blocks Style Description Terminals Part Number Style Contacts 1NO 1NC For use with HW-CBL on all Lead Holder illuminated pushbutton units. HW-LH3 Finger-Safe One required for each deck HW-U10 HW-U01 Spring-Up (pair) of contacts. HW-U10R (early make) HW-U01R (late break) Terminal Dummy Block with Full Voltage Adaptor For use with 1. All assembled part numbers in catalog include standard finger-safe spring-up odd number of Finger-Safe HW-DA1FBN contacts (HW-U...). contacts. . Full Voltage Adaptor Contact Block Mounting Adaptor Anti-Rotation Ring For use with Style Part Number Appearance Part Number even number of Finger-Safe TW-DA1FB contacts. HW-CBL HW9Z-RL Transformer Unit (6V secondary voltage) 1. Used to mount contact blocks to Use with notched panel cutout 120VAC TW-F126B operator (first pair only). to prevent unit rotation. 240VAC Finger-Safe TW-F246B 2. IDEC strongly recommends using the 480VAC TW-F486B safety lever lock to prevent heavy vibration or maintenance personnel LED Lamps from inadvertently unlocking contacts. Style Voltage Part Number Safety Lever Lock DC-DC Converter 110VDC HW-L16D 6V AC/DC LSTD-6N Style Part Number 1. *With spring-up terminals - to use spring-up terminal type, 12V AC/DC LSTD-1N LED must use transformer type operator designed for spring-up transformer. HW9Z-LS 24V AC/DC LSTD-2N 2. ** DC-DC converter voltage input from 90-140V DC. 120V AC LSTD-H2N Operators Lenses 240V AC LSTD-M4N Plastic Metal Style Part Number Style 1. In place of N, specify the LED Color Code. Bezel Bezel ø40mm 2. The LED contains a current-limiting resistor Momentary HW1L-M0L HW4L-M0L Mushroom ALW4BLU-N* and reverse polarity protection diodes. ø40mm 3. Yellow LED not available, use white LED Lens Mushroom when using yellow lens. Maintained HW1L-A0L HW4L-A0L Square Momentary HW2L-M0 HW2A-L1-N Flush Square – Maintained HW2L-A0 1. In place of N, specify the Lens Color Code. 2. *Mushroom lens not available in yellow. 1804091617 www.IDEC.com 628 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Selector Switches 2-Position (Assembled) 2-Position Selector Switches Operator Spring Return Handle Maintained Position from Right L R L R L R Knob HWQS-2T HWQS-21T Operator Only Lever HWQS-2L HWQS-21L Knob HWQS-2TF10 HWQS-21TF10 1NO 1 O X Lever HWQS-2LF10 HWQS-21LF10 1NO- 1 O X Knob HWQS-2TF11 HWQS-21TF11 1NC 2 X O Lever HWQS-2LF11 HWQS-21LF11 1 O X Knob HWQS-2TF20 HWQS-21TF20 2NO 2 O X Lever HWQS-2LF20 HWQS-21LF20 1 X O 2NO- 2 O X Knob HWQS-2TF22 HWQS-21TF22 2NC 3 X O Lever HWQS-2LF22 HWQS-21LF22 4 O X 1. In place of Q enter 1 for plastic bezel or 4 for metal bezel. Q Bezel Type 2. For nameplates, see page 655. Type Code 3. All assembled part numbers in catalog include standard finger- safe spring-up (HW-U...) contacts. Plastic 1 4. Standard color for knob and lever is black. Metal 4 5. Optional colors available for lever type. Must order in components. See next page for part numbers. 6. Additional contact configurations available (up to 6 total contacts). 7. For Truth Tables see page 668. 1804091617 800-262-IDEC (4332) • USA & Canada 629 Contact Mounting ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 S - 2 1 T F 10 Contact Arrangement 10: 1NO Bezel 11: 1NO-1NC 1: Plastic # of Positions 20: 2NO 4: Metal 2: 2-Position Handle Operator T: Knob blank: Maintained L: Lever 1: Spring Return from Right Note: Use only for interpreting part numbers. Do not use for developing part numbers. Selector Switches 2-Position (Replacement Parts) Anti-Rotation Contact Blocks + Mounting Adaptor + Safety Lever Lock + + Operator = Completed Unit Ring Contact Blocks Anti-Rotation Ring Style Contacts 1NO 1NC Style Part Number Finger- HW-U10 HW-U01 HW9Z-RL Safe Spring-Up HW-U10R HW-U01R Terminal (early make) (late break) Use with notched panel cutout to prevent unit rotation. Dummy HW-DB Block Operators Contact Block Mounting Adaptor Style Description Handle Plastic Bezel Metal Bezel Style Part Number Knob HW1S-2T HW4S-2T Maintained Lever HW1S-2 HW4S-2 HW-CB2C Knob HW1S-21T HW4S-21T Spring Return 1. Used to mount contact blocks to operator (first pair only). from Right 2. IDEC strongly recommends using the safety lever lock to Lever HW1S-21 HW4S-21 prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. 1. Knob operator comes with black handle. 2. To order lever type, lever and inserts must be ordered separately, along with lever Safety Lever Lock operator. See part numbers below. Style Part Number Levers & Inserts M Handle/Insert HW9Z-LS Color Code Style Part Number Color Code Black* B Lever ASWHHL-M Blue S Green G Red R Lever Color TW-HC1-M Yellow Y Insert † White W Standard lever color is black. Standard 1. * Lever color inserts not available in black. † insert color is white. 2. Lever not available in white. 1804091617 www.IDEC.com 630 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Selector Switches 3-Position (Assembled) 3–Position Selector Switches Spring Return Spring Return Spring Return Operator Position Handle Maintained from Right from Left Two-Way C C C C C L R L L L L R R R R Knob HWQS-3T* HWQS-31T HWQS-32T HWQS-33T Operator Only Lever HWQS-3L HWQS-31L HWQS-32L HWQS-33L 1NO- 1 0 X X Knob HWQS-3TF11 HWQS-31TF11 HWQS-32TF11 HWQS-33TF11 1NC 2 0 0 X Lever HWQS-3LF11 HWQS-31LF11 HWQS-32LF11 HWQS-33LF11 1 X 0 0 Knob HWQS-3TF20 HWQS-31TF20 HWQS-32TF20 HWQS-33TF20 2NO 2 0 0 X Lever HWQS-3LF20 HWQS-31LF20 HWQS-32LF20 HWQS-33LF20 1 0 X X Knob HWQS-3TF02 HWQS-31TF02 HWQS-32TF02 HWQS-33TF02 2NC 2 X 0 Lever X HWQS-3LF02 HWQS-31LF02 HWQS-32LF02 HWQS-33LF02 1 X 0 0 2NO- 2 0 0 X Knob HWQS-3JTF21N1 – – – 1NC 3 0 X 0 1 X 0 0 2NO- 2 0 0 X Knob HWQS-3TF22 HWQS-31TF22 HWQS-32TF22 HWQS-33TF22 X 2NC 3 0 X 4 X X 0 1 0 0 X 2NO- 2 X 0 0 Knob – – – HWQS-3STF22N9 2NC 3 X X 0 4 0 0 X Q Bezel Type 1 X 0 0 Type Code 2 0 0 X 4NO Knob HWQS-3TF40 HWQS-31TF40 HWQS-32TF40 HWQS-33TF40 3 X 0 0 Plastic 1 4 0 0 X Metal 4 1 X 0 0 X 2 0 X 4NO Knob HWQS-3STF40N2 – – – 3 X 0 0 4 0 0 X 1 0 X X X 2 X 0 4NC Knob HWQS-3TF04 HWQS-31TF04 HWQS-32TF04 HWQS-33TF04 3 0 X X X 4 X 0 1. In place of Q enter 1 for plastic bezel or 4 for metal bezel. 7. All assembled part numbers in catalog include standard finger-safe spring-up (HW-U...) contacts. 2. Knob operator includes black knob/lever operator includes black lever. 3. * Three position operator is available with three different cams. 8. Standard color for knob and lever is black. HWQS-3T: Maintained (standard cam) 9. Optional colors available for lever type. Must order in components. See next page for part numbers. HWQS-3ST: Maintained (S cam) HWQS-3JT: Maintained (J cam) 10. Additional contact configurations available (up to 6 total contacts). 11. For Truth Tables see page 668. 4. Operator cams are color coded (white=standard cam, red=S cam, black =J cam). 5. For nameplates, see page 655. 6. For contact assembly part numbers, see page 659 1804091617 800-262-IDEC (4332) • USA & Canada 631 Contact Mounting ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 S - 3 1 T F 20 Contact Arrangement 11: 1NO-1NC Bezel 20: 2NO 1: Plastic # of Positions 21: 2NO-1NC 4: Metal 3: 3-Position Handle Operator 22: 2NO-2NC T: Knob blank: Maintained 40: 4NO L: Lever 1: Spring Return from Right 04: 4NC 2: Spring Return from Left 3: Spring Return Two Way Note: Use only for interpreting part numbers. Do not use for developing part numbers. Selector Switches 3-Position (Replacement Parts) Anti-Rotation Contact Blocks + Mounting Adaptor + Safety Lever Lock + + Operator = Completed Unit Ring Contact Blocks Anti-Rotation Ring Style Contacts 1NO 1NC Style Part Number Use with notched panel cutout to HW-U10 HW-U01 Finger- HW9Z-RL prevent unit rotation. Safe Spring-Up HW-U10R HW-U01R Terminal Operators (early make) (late break) Style Description Handle Plastic Bezel Metal Bezel Dummy HW-DB Knob HW1S-3T HW4S-3T Block Maintained (standard cam) Lever HW1S-3 HW4S-3 Contact Block Mounting Adaptor Maintained (S cam) Knob HW1S-3ST HW4S-3ST Style Part Number Maintained (J cam) Knob HW1S-3JT HW4S-3JT Knob HW1S-31T HW4S-31T Spring Return from Right (standard cam) Lever HW1S-31 HW4S-31 HW-CB2C Knob HW1S-32T HW4S-32T Spring Return from Left (standard cam) Lever HW1S-32 HW4S-32 Knob HW1S-33T HW4S-33T 2-Way Spring Return 1. Used to mount contact blocks to operator (first pair only). (standard cam) Lever HW1S-33 HW4S-33 2. IDEC strongly recommends using the safety lever lock to prevent heavy vibration or maintenance personnel from 1. Knob operator comes with black handle. inadvertently unlocking contacts. 2. Three position knob operator is available with three different cams. 3. Operator cams are color coded (white=standard cam, red=S cam, black =J cam). 4. To order lever type, lever and inserts must be ordered separately, along with lever operator. Safety Lever Lock See part numbers below. Style Part Number Levers & Inserts M Handle/Insert Color Code Black* B Color Code Style Part Number HW9Z-LS Blue S Yellow Y † Green G White W Lever ASWHHL-M Red R 1. * Lever color inserts not Lever available in black. Color TW-HC1-M † 2. Lever not available in white. Insert Standard lever color is black. Standard insert color is white. 1804091617 www.IDEC.com 632 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Selector Switches 4- & 5-Position (Assembled) 4-Position Selector Switches 5-Position Selector Switch Operator Position Handle Maintained Operator Position Handle Maintained 2 3 2 3 2 4 1 3 4 1 2 4 5 1 3 1 5 4 Knob HWQS-4T Knob HWQS-5T Operator Only Operator Only Lever HWQS-4L Lever HWQS-5L 1 X 0 O O 1 X O O O O 1NO- 2 0 X 0 0 Knob HWQS-4TF12 2NO- 2 O X O O O Knob HWQS-5TF22N3 2NC 3 0 0 X 0 Lever HWQS-4LF12 2NC 3 O O O X O Lever HWQS-5LF22N3 4 0 0 0 0 4 O O O O X 1 O X X X 1NO- 2 O X O O Knob HWQS-4TF13N6 3NC 3 O O X O Lever HWQS-4LF13N6 4 O O O X 1 X O O O 2NO- 2 O X O O Knob HWQS-4TF22N3 2NC 3 O O X O Lever HWQS-4LF22N3 4 O O O X 1. In place of Q enter 1 for plastic bezel or 4 for metal bezel. Q Bezel Type 2. Knob operator includes black knob/lever operator includes black lever. 3. For nameplates, see page 655. Type Code 4. For contact assembly part numbers, see page 659. Plastic 1 5. Five position circuit cannot be made to make five independent contact closures. 6. All assembled part numbers in catalog include standard finger-safe spring-up (HW-U...) Metal 4 contacts. 7. Standard color for knob and lever is black. 8. Optional colors available for lever type. Must order in components. See next page for part numbers. 9. Additional contact configurations available (up to 6 total contacts). 10. For Truth Tables see page 668. 1804091617 800-262-IDEC (4332) • USA & Canada 633 Contact Mounting Contact Mounting ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 S - 4 T F 13N6 Contact Arrangement Bezel (based on desired truth table) 1: Plastic # of Positions 12: 1NO-2NC 4: Metal 4: 4-Position Handle 13N6: 1NO-3NC 5: 5-Position T: Knob 22N3: 2NO-2NC Note: Use only for interpreting part numbers. L: Lever Do not use for developing part numbers. Selector Switches 4- & 5-Position (Replacement Parts) Anti-Rotation Contact Blocks + Mounting Adaptor + Safety Lever Lock + + Operator = Completed Unit Ring Contact Blocks Anti-Rotation Ring Style Contacts 1NO 1NC Style Part Number HW-U10 HW-U01 Finger- HW9Z-RL Safe Spring-Up HW-U10R HW-U01R Terminal Use with notched panel cutout to prevent (early make) (late break) unit rotation. Dummy HW-DB Operators Block Style Position Description Handle Plastic Bezel Metal Bezel Contact Block Mounting Adaptor Knob HW1S-4T HW4S-4T Style Part Number 4 Maintained Lever HW1S-4 HW4S-4 HW-CB2C Knob HW1S-5T HW4S-5T 5 Maintained Lever HW1S-5 HW4S-5 1. Used to mount contact blocks to operator (first pair only). 2. IDEC strongly recommends using the safety lever lock to 1. Knob operator comes with black handle. prevent heavy vibration or maintenance personnel from 2. To order lever type, lever and inserts must be ordered separately, along with lever operator. See inadvertently unlocking contacts. part numbers below. Safety Lever Lock Levers & Inserts M Handle/Insert Color Code Style Part Number Style Part Number Color Code HW9Z-LS Black* B Lever ASWHHL-M Blue S Green G Red R Lever Color TW-HC1-M Yellow Y Insert † White W Standard lever color is black. Standard 1. * Lever color inserts not insert color is white. available in black. † 2. Lever not available in white. 1804091617 www.IDEC.com 634 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Key Switches 2-Position (Assembled) 2-Position Key Switches Operator Spring Return Maintained Position from Right L R L L R R Operator Only HWQK-2A HWQK-21B 1NO 1 O X HWQK-2AF10 HWQK-21BF10 1NO- 1 0 X HWQK-2AF11 HWQK-21BF11 1NC 2 X 0 1 O X 2NO HWQK-2AF20 HWQK-21BF20 2 O X 1 0 X 2NO- 2 X 0 HWQK-2AF22 HWQK-21BF22 2NC 3 0 X 4 X 0 1. In place of Q enter 1 for plastic bezel or 4 for metal bezel. 2. Key is removable in all maintained positions. Other key removable options available. 3. Two keys are supplied with all switches. Q Bezel Type 4. All standard operators are keyed alike. 5. Other key removable options available. See table below Type Code 6. For nameplates, see page 655. Plastic 1 7. For contact assembly part numbers, see page 659. 8. Key is retained in “Spring Return” position. Metal 4 9. All assembled part numbers in catalog include finger-safe spring-up (HW-U...) contacts. 10. Additional contact configurations available (up to 6 total contacts). 11. For Truth Tables see page 659. Key Removable Option Codes Code Description A Key not retained in any position (removable in all positions) B Key retained in right position only (removable LEFT) C Key retained in left position only (removable RIGHT) 1804091617 800-262-IDEC (4332) • USA & Canada 635 Contact Mounting ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 K - 2 1 B F 10 Contact Arrangement 10: 1NO 20: 2NO Bezel 11: 1NO-1NC 22: 2NO-2NC 1: Plastic # of Positions 4: Metal 2: 2-Position Operator Key Retained Position blank: Maintained A: Key not retained in any position (removable in all positions) 1: Spring Return from Right B: Key retained in right position only (removable LEFT) C: Key retained in left position only (removable RIGHT) Note: Use only for interpreting part numbers. Do not use for developing part numbers. Key Switches 2-Position (Replacement Parts) Anti-Rotation Contact Assembly + Mounting Adaptor + Safety Lever Lock + + Operator = Completed Unit Ring Contact Blocks Safety Lever Lock Style Contacts 1NO 1NC Style Part Number Finger- HW-U10 HW-U01 Safe HW9Z-LS Spring-Up HW-U10R HW-U01R Terminal (early make) (late break) Anti-Rotation Ring Dummy Style Part Number HW-DB Block HW9Z-RL Use with notched panel cutout to prevent unit rotation. Contact Block Mounting Adaptor Style Part Number Operators Style Description Plastic Bezel Metal Bezel HW-CB2C Maintained HW1K-2A HW4K-2A Maintained, key removed HW1K-2B HW4K-2B left only 1. Used to mount contact blocks to operator (first pair only). Spring Return from Right HW1K-21B HW4K-21B 2. IDEC strongly recommends using the safety lever lock to prevent heavy Maintained, key removed vibration or maintenance personnel from HW1K-2C HW4K-2C right only inadvertently unlocking contacts. 1. Operator includes two keys. 2. All standard operators are keyed alike. 1804091617 www.IDEC.com 636 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Key Switches 3-Position (Assembled) 3-Position Key Switches Spring Return Spring Return Spring Return Two Operator Position Maintained from Right from Left Way C C C C C L R L L L L R R R R Q Bezel Type Operator Only HWQK-3A* HWQK-31B HWQK-32C HWQK-33D Type Code 1NO- 1 0 X X Plastic 1 HWQK-3AF11 HWQK-31BF11 HWQK-32CF11 HWQK-33DF11 1NC 2 0 0 X Metal 4 1 X 0 0 2NO HWQK-3AF20 HWQK-31BF20 HWQK-32CF20 HWQK-33DF20 2 0 0 X 1 0 X X 2NC HWQK-3AF02 HWQK-31BF02 HWQK-32CF02 HWQK-33DF02 X 2 X 0 1 X 0 0 2NO- 2 0 0 X – – – HWQK-3JAF21N1 1NC 3 0 X 0 1 X 0 0 2NO- 2 0 0 X HWQK-3AF22 HWQK-31BF22 HWQK-32CF22 HWQK-33DF22 2NC 3 0 X X X 4 X 0 1 0 0 X 2NO- 2 X 0 0 HWQK-3SAF22N9 – – – X 2NC 3 X 0 4 0 0 X 1 X 0 0 2 0 0 X 4NO HWQK-3AF40 HWQK-31BF40 HWQK-32CF40 HWQK-33DF40 3 X 0 0 4 0 0 X 1 X 0 0 2 0 X X 4NO HWQK-3SAF40N2 – – – 3 X 0 0 4 0 0 X 1 0 X X 2 X X 0 4NC HWQK-3AF04 HWQK-31BF04 HWQK-32CF04 HWQK-33DF04 X 3 0 X 4 X X 0 8. For contact assembly part numbers, see page 659. 1. In place of Q enter 1 for plastic bezel or 4 for metal Key Removable Option Codes bezel. 9. All assembled part numbers in catalog include Code Description 2. Key is removable in all maintained positions. Other standard Finger-Safe spring-up (HW-U...) contacts. 10. Additional contact configurations available (up to 6 key removable options available. A Key not retained in any position (removable in all positions) 3. Two keys are supplied with all switches. total contacts). 11. For Truth Tables see page 668. 4. All standard operators are keyed alike. B Key retained in right position only 5. Other key removable options available. See table to C Key retained in left position only the right. 6. * Operator is available with three different cams. D Key retained in left and right (3 position only) HWQK-3A: Maintained (standard cam) HWQK-3SA: Maintained (Cam S) E Key retained in center only (3 position only) HWQK-3JA: Maintained (Cam J) G Key retained right and center (3 position only) 7. For nameplates, see page 655. H Key retained left and center (3 position only) 1804091617 800-262-IDEC (4332) • USA & Canada 637 Contact Mounting ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 K - 3 1 B F 11 Contact Arrangement 11: 1NO-1NC 40: 4NO Bezel 20: 2NO 04: 4NC 1: Plastic # of Positions 22: 2NO-2NC 4: Metal 3: 3-Position Operator blank: Maintained Key Removable Option Code 1: Spring Return from Right (see chart on previous page) 2: Spring Return from Left 3: Spring Return Two Way Note: Use only for interpreting part numbers. Do not use for developing part numbers. Key Switches 3-Position (Replacement Parts) Anti-Rotation Contact Assembly + Mounting Adaptor + Safety Lever Lock + + Operator = Completed Unit Ring Contact Blocks Safety Lever Lock Style Contacts 1NO 1NC Style Part Number Finger- HW-U10 HW-U01 HW9Z-LS Safe Spring-Up HW-U10R HW-U01R Terminal (early make) (late break) Anti-Rotation Ring Style Part Number Dummy HW-DB Block HW9Z-RL Use with notched panel cutout to prevent unit rotation. Contact Block Mounting Adaptor Style Part Number Operators Style Description Plastic Bezel Metal Bezel Maintained (standard cam) HW1K-3A HW4K-3A HW-CB2C Maintained (S cam) HW1K-3SA HW4K-3SA Maintained (J cam) HW1K-3JA HW4K-3JA Spring Return from Right (standard cam) HW1K-31B HW4K-31B 1. Used to mount contact blocks to operator (first pair only). Spring Return from Left (standard cam) HW1K-32C HW4K-32C 2. IDEC strongly recommends using the safety lever lock to prevent heavy 2-Way Spring Return (standard cam) HW1K-33D HW4K-33D vibration or maintenance personnel from 1. Operator includes two keys. inadvertently unlocking contacts. 2. All standard operators are keyed alike. 3. Other key removable options available. See table on previous page. 4. Key not removable from spring-returned position 1804091617 www.IDEC.com 638 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Illuminated Selector Switches 2-Position (Assembled) 2-Position Illuminated Selector Switches Style Part Number Operator Spring Return from Type Maintained Position Right L R L L R R Operator Only HWQF-2N HWQF-21N Full Voltage HWQF-2F11QD-N-O HWQF-21F11QD-N-O 1NO- 1 O X 120V HWQF-2F11H2D-N HWQF-21F11H2D-N 1NC 2 X O Transformer 240V HWQF-2F11M4D-N HWQF-21F11M4D-N 480V HWQF-2F11T8D-N HWQF-21F11T8D-N Full Voltage HWQF-2F20QD-N-O HWQF-21F20QD-N-O 1 X O 120V HWQF-2F20H2D-N HWQF-21F20H2D-N 2NO 2 O X Transformer 240V HWQF-2F20M4D-N HWQF-21F20M4D-N 480V HWQF-2F20T8D-N HWQF-21F20T8D-N Full Voltage HWQF-2F22QD-N-O HWQF-21F22QD-N-O 1 O X 2NO- 2 X O 120V HWQF-2F22H2D-N HWQF-21F22H2D-N 2NC 3 O X Transformer 240V HWQF-2F22M4D-N HWQF-21F22M4D-N 4 X O 480V HWQF-2F22T8D-N HWQF-21F22T8D-N 1. In place of N specify Lens/LED color code. 2. In place of O specify Full Voltage code. 3. In place of Q enter 1 for plastic bezel or 4 for metal bezel. 4. For nameplates, see page 655. 5. For contact assembly part numbers, see page 659. 6. Light is independent of switch position. 7. All assembled part numbers in catalog include standard Finger-Safe spring-up (HW-U...) contacts. 8. Yellow selector switch comes with white LED. 9. Additional contact configurations available (up to 6 total contacts). 10. For Truth Tables see page 668. N Lens/LED Color Code O Full Voltage Code Q Bezel Code Color Code Full Voltage Models Type Code Amber A Voltage Code Plastic 1 Green G 6VAC/DC 6V Metal 4 Red R 12VAC/DC 12V Blue S 24VAC/DC 24V White W 120V AC 120V Yellow Y 240V AC 240V 1804091617 800-262-IDEC (4332) • USA & Canada 639 Contact Mounting ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 F – 21 F 20 Q D – G – 24V LED Voltage Bezel (Full voltage units only) Lens Color 1: Plastic Position 6V: 6V AC/DC A: Amber S: Blue 4: Metal 2: Maintained Contact Arrangement 12V: 12V AC/DC G: Green W: White 21: Spring Return 11: 1NO-1NC Illumination Circuit 24V: 24V AC/DC R: Red Y: Yellow from Right 20: 2NO Q: Full Voltage 120V: 120V AC 22: 2NO-2NC H2: Transformer 120V AC 240V: 240V AC Note: Use only for interpreting part numbers. M4: Transformer 240V AC Do not use for developing part numbers. T8: Tranformer 480V AC Illuminated Selector Switches 2-Position (Replacement Parts) Contact Lead Mounting Safety Anti-Rotation Transformer* + + + + + LED + + Operator + Lens = Completed Unit Blocks Holder Adaptor Lever Lock Ring *Transformer not needed with full voltage models. Lamp Circuit Components Contact Blocks Part Style Contacts 1NO 1NC Style Description Terminals Number For use with HW-CBL on all Lead Holder Finger-Safe illuminated pushbutton units. HW-U10 HW-U01 HW-LH3 Spring-Up One required for each deck (pair) HW-U10R (early make) HW-U01R (late break) of contacts. Terminal Dummy Block with Full Voltage Adaptor For use with odd number of Finger-Safe HW-DA1FBN Contact Block Mounting Adaptor N Lens/LED Color Code contacts. Style Part Number Color Code Color Code Amber A Blue S Full Voltage Adaptor Green G White W HW-CBL For use with even number of Finger-Safe TW-DA1FB Red R Yellow Y contacts. 1. Used to mount contact blocks to Anti-Rotation Ring operator (first pair only). Transformer Unit 2. IDEC strongly recommends Style Part Number (6V secondary using the safety lever lock to prevent voltage) heavy vibration or maintenance 120VAC TW-F126B HW9Z-RL personnel from inadvertently 240VAC Finger-Safe TW-F246B unlocking contacts. 480VAC TW-F486B Use with notched panel cutout to prevent unit rotation. Safety Lever Lock Style Part Number Lamps DC-DC Converter 110VDC HW-L16D Style Voltage Part Number 1. DC-DC convertor features spring-up terminals. HW9Z-LS 6V AC/DC LSTD-6N 2. DC-DC convertor applicable voltage range 90-140V DC. 12V AC/DC LSTD-1N LED Operators 24V AC/DC LSTD-2N Illuminated Knob Plastic Style Description Metal Bezel 120V AC LSTD-H2N Bezel Appearance Part Number 240V AC LSTD-M4N Maintained HW1F-2 HW4F-2 1. In place of N, specify the LED Color Code. HW9Z-FDY-N 2. The LED contains a current-limiting resistor and Spring return HW1F-21 HW4F-21 reverse polarity protection diodes. from right 3. Use white LED for yellow lens. Yellow LED not In place of N, specify the available. Illuminated knobs must be ordered separately. Color Code. 1804091617 www.IDEC.com 640 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Illuminated Selector Switches 3-Position (Assembled) 3-Position Illuminated Selector Switches Style Part Number Spring Return from Spring Return from Spring Return Two- Operator Position Type Maintained Right Left Way C C C C C L R L L L L R R R R Operator Only HWQF-3N HWQF-31N HWQF-32N HWQF-33N Full Voltage HWQF-3F11QD-N-O HWQF-31F11QD-N-O HWQF-32F11QD-N-O HWQF-33F11QD-N-O 1NO- 1 O X X 120V HWQF-3F11H2D-N HWQF-31F11H2D-N HWQF-32F11H2D-N HWQF-33F11H2D-N 1NC 2 O O X Transformer 240V HWQF-3F11M4D-N HWQF-31F11M4D-N HWQF-32F11M4D-N HWQF-33F11M4D-N 480V HWQF-3F11T8D-N HWQF-31F11T8D-N HWQF-32F11T8D-N HWQF-33F11T8D-N Full Voltage HWQF-3F20QD-N-O HWQF-31F20QD-N-O HWQF-32F20QD-N-O HWQF-33F20QD-N-O 1 X 0 O 120V HWQF-3F20H2D-N HWQF-31F20H2D-N HWQF-32F20H2D-N HWQF-33F20H2D-N 2NO 2 0 0 X Transformer 240V HWQF-3F20M4D-N HWQF-31F20M4D-N HWQF-32F20M4D-N HWQF-33F20M4D-N 480V HWQF-3F20T8D-N HWQF-31F20T8D-N HWQF-32F20T8D-N HWQF-33F20T8D-N Full Voltage HWQF-3F02QD-N-O HWQF-31F02QD-N-O HWQF-32F02QD-N-O HWQF-33F02QD-N-O 1 O X X 120V HWQF-3F02H2D-N HWQF-31F02H2D-N HWQF-32F02H2D-N HWQF-33F02H2D-N 2NC 2 X X O Transformer 240V HWQF-3F02M4D-N HWQF-31F02M4D-N HWQF-32F02M4D-N HWQF-33F02M4D-N 480V HWQF-3F02T8D-N HWQF-31F02T8D-N HWQF-32F02T8D-N HWQF-33F02T8D-N Full Voltage HWQF-3F22QD-N-O HWQF-31F22QD-N-O HWQF-32F22QD-N-O HWQF-33F22QD-N-O 1 X O O 2NO- 2 O O X 120V HWQF-3F22H2D-N HWQF-31F22H2D-N HWQF-32F22H2D-N HWQF-33F22H2D-N 2NC 3 O X X Transformer 240V HWQF-3F22M4D-N HWQF-31F22M4D-N HWQF-32F22M4D-N HWQF-33F22M4D-N 4 X X O 480V HWQF-3F22T8D-N HWQF-31F22T8D-N HWQF-32F22T8D-N HWQF-33F22T8D-N Full Voltage HWQF-3F40QD-N-O HWQF-31F40QD-N-O HWQF-32F40QD-N-O HWQF-33F40QD-N-O 1 X O O 2 O O X 120V HWQF-3F40H2D-N HWQF-31F40H2D-N HWQF-32F40H2D-N HWQF-33F40H2D-N 4NO 3 X O O Transformer 240V HWQF-3F40M4D-N HWQF-31F40M4D-N HWQF-32F40M4D-N HWQF-33F40M4D-N 4 O O X 480V HWQF-3F40T8D-N HWQF-31F40T8D-N HWQF-32F40T8D-N HWQF-33F40T8D-N Full Voltage HWQF-3F04QD-N-O HWQF-31F04QD-N-O HWQF-32F04QD-N-O HWQF-33F04QD-N-O 1 O X X 2 X X O 120V HWQF-3F04H2D-N HWQF-31F04H2D-N HWQF-32F04H2D-N HWQF-33F04H2D-N 4NC 3 O X X Transformer 240V HWQF-3F04M4D-N HWQF-31F04M4D-N HWQF-32F04M4D-N HWQF-33F04M4D-N 4 X X O 480V HWQF-3F04T8D-N HWQF-31F04T8D-N HWQF-32F04T8D-N HWQF-33F04T8D-N 8. Yellow selector switch comes 1. In place of N specify Lens/LED color N Lens/LED Color O Full Voltage Code Q Bezel Code code. with white LED. 2. In place of O specify Full Voltage 9. Additional contact configurations Color Code Full Voltage Models Type Code code. available (up to 6 total contacts). 3. In place of Q enter 1 for plastic bezel 10. For Truth Tables see page 668. Amber A Voltage Code Plastic 1 or 4 for metal bezel. Green G 6VAC/DC 6V Metal 4 4. For nameplates, see page 655. 5. For contact assembly part numbers, Red R 12VAC/DC 12V see page 659. 6. Light is independent of switch position. Blue S 24VAC/DC 24V 7. All assembled part numbers in catalog White W 120V AC 120V include standard Finger-Safe spring-up (HW-U..) contacts. Yellow Y 240V AC 240V 1804091617 800-262-IDEC (4332) • USA & Canada 641 Contact Mounting ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 F – 31 F 20 Q D – G – 24V Full Voltage Code Bezel 6V: 6V AC/DC Lens Color 1: Plastic Position 12V: 12V AC/DC A: Amber S: Blue 4: Metal 3: Maintained Contact Arrangement 24V: 24V AC/DC G: Green W: White 31: Spring Return 11: 1NO-1NC 22: 2NO-2NC Illumination Circuit 120V: 120V AC R: Red Y: Yellow from Right 20: 2NO 40: 4NO Q: Full Voltage 240V: 240V AC 32: Spring Return 02: 2NC 04: 4NC H2: Transformer 120V AC from Left M4: Transformer 240V AC 33: Spring Return 2-Way T8: Tranformer 480V AC Note: Use only for interpreting part numbers. Do not use for developing part numbers. Illuminated Selector Switches 3-Position (Replacement Parts) Contact Lead Mounting Safety Anti-Rotation Transformer* + + + + + LED + + Operator + Lens = Completed Unit Blocks Holder Adaptor Lever Lock Ring *Transformer not needed with full voltage models. Lamp Circuit Components Contact Blocks Part Style Contacts 1NO 1NC Style Description Terminals Number For use with HW-CBL on all Lead Holder illuminated pushbutton units. Finger-Safe HW-LH3 HW-U10 HW-U01 One required for each deck Spring-Up HW-U10R (early make) HW-U01R (late break) (pair) of contacts. Terminal Dummy Block with Full Voltage Adaptor For use with odd number of Finger-Safe HW-DA1FBN Contact Block Mounting Adaptor N Lens/LED Color Code contacts. Style Part Number Color Code Color Code Amber A Blue S Full Voltage Adaptor For use with Green G White W HW-CBL even number of Finger-Safe TW-DA1FB contacts. Red R Yellow Y Transformer Unit 1. Used to mount contact blocks to Anti-Rotation Ring operator (first pair only). (6V secondary Style Part Number 2. IDEC strongly recommends voltage) 120VAC TW-F126B using the safety lever lock to prevent 240VAC Finger-Safe TW-F246B heavy vibration or maintenance HW9Z-RL personnel from inadvertently unlocking 480VAC TW-F486B contacts. Use with notched panel cutout to prevent Safety Lever Lock unit rotation. Style Part Number Lamps DC-DC Converter 110VDC HW-L16D 1. DC-DC convertor features spring-up terminals. Style Voltage Part Number HW9Z-LS 2. DC-DC convertor applicable voltage range 90-140V DC. 6V AC/DC LSTD-6N Operators 12V AC/DC LSTD-1N LED Metal 24V AC/DC LSTD-2N Style Description Plastic Bezel Illuminated Knob Bezel 120V AC LSTD-H2N Appearance Part Number Maintained HW1F-3 HW4F-3 240V AC LSTD-M4N Spring return from right HW1F-31 HW4F-31 HW9Z-FDY-N 1. In place of N, specify the LED Color Code. Spring return from left HW1F-32 HW4F-32 2. The LED contains a current-limiting resistor and 2-Way spring return HW1F-33 HW4F-33 reverse polarity protection diodes. 3. Use white LED for yellow lens. Yellow LED not In place of N, specify the Color Code. Illuminated knobs must be ordered separately. available. 1804091617 www.IDEC.com 642 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Mono Lever Switches 2-Position (Assembled) 2-Position Mono Lever Switches Circuit Diagrams 2 Position Left/Right Style Part Number Description Contact Mounting Position HW1M-F1010-20 Maintained up and down Circuit Number No. Left Center Right HW1M-F2020-20 Spring return up and down 1 HW-U10 X 0 0 HW1M-F1010-40 Maintained up and down 20 2 HW-U10 0 0 X HW1M-F2020-40 Spring return up and down HW1M Standard Lever 1 HW-U10 X 0 0 HW1M-F0101-20 Maintained right and left 2 HW-U10 0 0 X HW1M-F0202-20 Spring return right and left 40 3 HW-U10 X 0 0 HW1M-F0101-40 Maintained right and left 4 HW-U10 0 0 X HW1M-F0202-40 Spring return right and left HW1M-LF1010-20 Maintained up and down 2 Position Up/Down HW1M-LF2020-20 Spring return up and down Contact Mounting Position Circuit HW1M-LF1010-40 Maintained up and down Number No. Down Center Up HW1M-LF2020-40 Spring return up and down HW1M-L 1 HW-U10 X 0 0 Interlocking Lever 20 HW1M-LF0101-20 Maintained right and left 2 HW-U10 0 0 X HW1M-LF0202-20 Spring return right and left 1 HW-U10 X 0 0 HW1M-LF0101-40 Maintained right and left 2 HW-U10 0 0 X HW1M-LF0202-40 Spring return right and left 40 3 HW-U10 X 0 0 All Assembled units with Finger-Safe spring-up (HW-U...) contacts 4 HW-U10 0 0 X 1804091617 800-262-IDEC (4332) • USA & Canada 643 ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 M - L F 0 1 0 1 20 up right down left Type Circuit Number blank: Standard 20 or 40 (see contact arrange- Lever Action L: Interlocking ment on previous page) 1: Maintained 2: Spring Note: Use only for interpreting part numbers. 0: Blocked Do not use for developing part numbers. Mono Lever Switches 2-Position (Sub-assembled) Part Numbers Safety Lever Anti-Rotation Contact Assembly + Mounting Adaptor + + + Operator = Completed Unit Lock Ring Contact Blocks Anti-Rotation Ring Style Contacts 1NO 1NC Style Part Number Finger- HW-U10 HW-U01 HW9Z-RL Safe Spring-Up HW-U10R HW-U01R Terminal (early make) (late break) Use with notched panel cutout to prevent unit rotation. Dummy HW-DB Block Operators Style Description Part Number Contact Block Mounting Adaptor Standard Maintained Up/Down HW1M-1010 Style Part Number Spring return Up/Down HW1M-2020 Maintained Left/Right HW1M-0101 Spring return Left/Right HW1M-0202 HW-CB2C Interlocking Maintained Up/Down HW1M-L1010 Spring return Up/Down HW1M-L2020 1. Used to mount contact blocks to operator (first pair only). Maintained Left/Right HW1M-L0101 2. IDEC strongly recommends using the safety lever lock (included) to prevent heavy vibration Spring return Left/Right HW1M-L0202 or maintenance personnel from inadvertently unlocking contacts. Replacement Parts Safety Lever Lock Item Part Number Style Part Number Black Cap HW9Z-CPM HW9Z-LS Boot HW9Z-BLM (fits standard operator only) 1804091617 www.IDEC.com 644 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Mono Lever Switches 3- & 4-Position (Assembled) 3-Position 4-Position Style Part Number Description Style Part Number Description Maintained right and left, HW1M-F1111-22N9 Maintained all positions HW1M-F0121-12N3 HW1M spring return down Maintained up and down, Standard Lever HW1M-F1212-22N9 HW1M-F0222-12N3 Spring return right, down, left spring left and right HW1M Standard Lever Maintained right and left, Spring up and down, HW1M-LF0121-12N3 HW1M-2121-22N9 HW1M-L spring return down maintained left and right Interlocking Lever HW1M-LF0222-12N3 Spring return right, down, left HW1M-2222-22N9 Spring return all positions HW1M-LF1111-22N9 Maintained all positions Circuit Diagram Maintained up and down, HW1M-LF1212-22N9 spring left and right Contact Mounting Position HW1M-L Circuit Interlocking Lever Number Spring up and down, No. Down Left Center Up Right HW1M-LF2121-22N9 maintained left and right 1 HW-U01 0 0 0 O X HW1M-LF2222-22N9 Spring return all positions 12N3 2 HW-U01 X 0 0 O 0 3 HW-U10 0 X 0 0 0 Circuit Diagram Contact Mounting Position Circuit Number No. Down Left Center Up Right 1 HW-U01 0 O 0 0 X 2 HW-U01 X 0 0 0 0 22N9 3 HW-U10 0 X 0 0 0 4 HW-U10 0 0 0 X 0 All assembled part numbers in catalog include Finger-Safe spring-up (HW-U...) contacts. 1804091617 800-262-IDEC (4332) • USA & Canada 645 ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 M - L F 0 1 2 1 12N3 up right down left Type Circuit Number blank: Standard 3 Position: 12N3 Lever Action L: Interlocking 4 Position: 22N9 1: Maintained 2: Spring Note: Use only for interpreting part numbers. 0: Blocked Do not use for developing part numbers. Mono Lever Switches 3 & 4-Position (Sub-assembled) Part Numbers Safety Anti-Rotation Contact Assembly + Mounting Adaptor + + + Operator = Completed Unit Lever Lock Ring Contact Blocks Anti-Rotation Ring Style Contacts 1NO 1NC Style Part Number HW-U10 HW-U01 HW9Z-RL Spring-Up Terminal HW-U10R HW-U01R (early make) (late break) Use with notched panel cutout to prevent unit rotation. Operators Dummy HW-DB Block Style Description Part Number Combination, 3 position HW1M-0121 Standard Spring return, 3 position HW1M-0222 Contact Block Mounting Adaptor Maintained, 4 position HW1M-1111 Style Part Number Combination, 4 position HW1M-1212 Combination, 4 position HW1M-2121 Spring return, 4 position HW1M-2222 HW-CB2C Combination, 3 position HW1M-L0121 Interlocking Spring return, 3 position HW1M-L0222 1. Used to mount contact blocks to operator (first pair only). Maintained, 4 position HW1M-L1111 2. IDEC strongly recommends using the safety lever lock Combination, 4 position HW1M-L1212 (included) to prevent heavy vibration or maintenance personnel from inadvertently unlocking contacts. Combination, 4 position HW1M-L2121 Safety Lever Lock Spring return, 4 position HW1M-L2222 Style Part Number Replacement Parts HW9Z-LS Item Part Number Black Cap HW9Z-CPM Boot HW9Z-BLM (fits standard operator only) 1804091617 www.IDEC.com 646 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Pushbutton Selectors (Assembled) 2-Position Pushbutton Selectors Operator Position M Button Color Code Left Right Color Code Color Code Normal Push Normal Push Cam Contacts Mounting Part Number Black B White W Operator Only HW1R-2A-M Green G Yellow Y 1 HW-U10 0 X 0 X 1NO-1NC HW1R-2AF11-M Red R 2 HW-U01 X 0 0 0 Blue S 1 HW-U10 0 X 0 X 2NO HW1R-2AF20-M A X 2 HW-U10 0 X X 1 HW-U10 0 X 0 X 2 HW-U01 X 0 0 0 2NO-2NC HW1R-2AF22-M 3 HW-U10 0 X 0 X 4 HW-U01 X 0 0 0 Operator Only HW1R-2D-M 1 HW-U10 0 X 0 0 2NO HW1R-2DF20-M 2 HW-U10 0 0 0 X D 1 HW-U10 0 X 0 0 2 HW-U10 0 0 0 X 2NO-2NC HW1R-2DF22N1-M X 3 HW-U01 X 0 X 4 HW-U01 X X X 0 Operator Only HW1R-2E-M 1 HW-U10 0 X 0 0 E 2 HW-U10 0 0 0 X 2NO-2NC HW1R-2EF22N1-M X 3 HW-U01 0 0 X 4 HW-U01 X X 0 0 Operator Only HW1R-2F-M 1 HW-U10 0 0 0 X F 2 HW-U10 0 X 0 0 2NO-2NC HW1R-2FF22N1-M 3 HW-U01 0 0 X 0 4 HW-U01 X 0 0 0 Operator Only HW1R-2N-M 1 HW-U01 0 0 X 0 N 2 HW-U10 0 X 0 X 2NO-2NC HW1R-2NF22N2-M 3 HW-U01 0 0 X 0 4 HW-U10 0 X 0 X Operator Only HW1R-2T-M 1 HW-U10 0 X X T 2 HW-U10 0 X X 2NO-2NC Blocked HW1R-2TF22N1-M 3 HW-U01 X 0 0 4 HW-U01 X 0 0 1. All assembled part numbers in catalog include Finger-Safe spring-up (HW-U...) contacts. 2. Operator only models come with operator and button. 1804091617 800-262-IDEC (4332) • USA & Canada 647 ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 1 R - 2 D F 22N1 – R Button Colors Operator B: Black A: Cam A G: Green Contact Arrangement Code D: Cam D 11: 1NO-1NC R: Red E: Cam E 20: 2NO S: Blue F: Cam F (For additional contact codes see W: White N: Cam N previous page) Y: Yellow T: Cam T Note: Use only for interpreting part numbers. Do not use for developing part numbers. Pushbutton Selectors (Sub-assembled) Safety Lever Anti-Rotation Contact Blocks + Mounting Adaptor + + + Operator + Button = Completed Unit Lock Ring Contact Blocks Safety Lever Lock Buttons Style Contacts 1NO 1NC Style Part Number Style Part Number Round Flush HW-U10 HW-U01 HW9Z-LS Spring-Up Terminal HW1A-B1-M HW-U10R HW-U01R (early make) (late break) Anti-Rotation Ring Dummy In place of M, specify the HW-DB Style Part Number Block Button Color Code from table below. HW9Z-RL M Button Color Code Contact Block Mounting Adaptor Color Code Color Code (safety lever lock included) Use with notched panel cutout to prevent unit rotation. Black B White W Style Part Number Green G Yellow Y Operators Red R Part Blue S HW-CB2C Style Description Number Cam A HW1R-2A Cam D HW1R-2D 1. Used to mount contact blocks to operator (first pair only). Cam E HW1R-2E 2. IDEC strongly recommends using the safety lever lock (included) to prevent heavy vibration Cam F HW1R-2F or maintenance personnel from inadvertently unlocking contacts. Cam N HW1R-2N Cam T HW1R-2T 1804091617 www.IDEC.com 648 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Dual Pushbutton Switches Key features: • Two pushbuttons and a pilot light are integrated into one space- saving ø22 mm control unit. • Momentary and interlock types are available for pushbuttons. Inter- lock type prevents both buttons from being pressed at the same time. • Pilot lights are available in full voltage and transformer with LED. • IP40 protection, IP65 when using silicon boot. Applications: • Ideal for use as power switches and start/stop switches (available with I/ON and O/OFF markings on the buttons and a pilot light in the center). • Interlock type prevents two pushbuttons from being pressed at the same time. Dual Pushbutton Switches (Assembled) Part Numbers Without Center Pilot Light Contact Arrangement Operation PButton Color Button Style Part Number QLegend Code Type Code Top Button Bottom Button 1NO 1NC HW7D-B11F1001-PQ 1NO 1NO HW7D-B11F1010-PQ Flush (top) 1NO-1NC 1NO-1NC HW7D-B11F1111-PQ Flush (bottom) 2NO 2NC HW7D-B11F2002-PQ 2NO 2NO HW7D-B11F2020-PQ Momentary 1NO 1NC HW7D-B12F1001-PQ 1NO 1NO HW7D-B12F1010-PQ Flush (top) 1NO-1NC 1NO-1NC HW7D-B12F1111-PQ GR: Extended (bottom) Green (top) Blank: 2NO 2NC HW7D-B12F2002-PQ Red (bottom) Without legend 2NO 2NO HW7D-B12F2020-PQ 1: 1NO 1NC HW7D-B21F1001-PQ WB: I/ON (top) 1NO 1NO HW7D-B21F1010-PQ White (top) O/OFF (bottom) Flush (top) Black (bottom) 1NO-1NC 1NO-1NC HW7D-B21F1111-PQ Flush (bottom) 2NO 2NC HW7D-B21F2002-PQ 2NO 2NO HW7D-B21F2020-PQ Interlock* 1NO 1NC HW7D-B22F1001-PQ 1NO 1NO HW7D-B22F1010-PQ Flush (top) 1NO-1NC 1NO-1NC HW7D-B22F1111-PQ Extended (bottom) 2NO 2NC HW7D-B22F2002-PQ 2NO 2NO HW7D-B22F2020-PQ 1. *Interlock type prevents both top and bottom buttons from being pressed simultaneously. 2. Clear silicon rubber cover part number HW9Z-D7D. 3. Additional contact configurations available (up to 6 total contacts). 1804091617 800-262-IDEC (4332) • USA & Canada 649 ø22mm - HW Series Switches & Pilot Devices With Center Pilot Light Operation Button Style Top Button Bottom Button Part Number Type 1NO 1NC HW7D-L11F1001NO-PQ 1NO 1NO HW7D-L11F1010NO-PQ Flush (Top) Flush (top) 1NO-1NC 1NO-1NC HW7D-L11F1111NO-PQ Flush (Bottom) Flush (bottom) 2NO 2NC HW7D-L11F2002NO-PQ 2NO 2NO HW7D-L11F2020NO-PQ Momentary 1NO 1NC HW7D-L12F1001NO-PQ 1NO 1NO HW7D-L12F1010NO-PQ Flush (Top) 1NO-1NC 1NO-1NC HW7D-L12F1111NO-PQ Extended (Bottom) 2NO 2NC HW7D-L12F2002NO-PQ 2NO 2NO HW7D-L12F2020NO-PQ 1NO 1NC HW7D-L21F1001NO-PQ Flush (top) Extended (bottom) 1NO 1NO HW7D-L21F1010NO-PQ Flush (Top) 1NO-1NC 1NO-1NC HW7D-L21F1111NO-PQ Flush (Bottom) 2NO 2NC HW7D-L21F2002NO-PQ 2NO 2NO HW7D-L21F2020NO-PQ Interlock* 1NO 1NC HW7D-L22F1001NO-PQ 1NO 1NO HW7D-L22F1010NO-PQ Flush (Top) 1NO-1NC 1NO-1NC HW7D-L22F1111NO-PQ Extended (Bottom) 2NO 2NC HW7D-L22F2002NO-PQ 2NO 2NO HW7D-L22F2020NO-PQ 1. *Interlock type prevents both top and bottom buttons from being pressed simultaneously. 2. Clear silicon rubber cover part number HW9Z-D7D. 3. All assembled part numbers in catalog include Finger-Safe spring-up (HW-U...) contacts. NPilot Light Illumination O Pilot Lamp Color Code PPushbutton Color Code QEngraving Codes & Voltage Code Color Code Color Code Engraving Code Full Voltage Amber A Top Green No Engraving Blank GR Voltage Code Green G Bottom Red I/ON Top 1 6V AC/DC, LED Q2 Red R Top White O/OFF Bottom WB 12V AC/DC, LED Q3 Blue S Bottom Black 24V AC/DC, LED Q4 White W 120V AC, LED Q8 Step-Down Transformer (6V Secondary LED Voltage) Voltage Code 120V AC, LED H22 240V AC, LED M42 480V AC, LED T82 1804091617 www.IDEC.com 650 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Part Number Structure H W 7 D – L 21 F 20 20 H22 R – GR 1 Pilot Light Engraving Code B: Without Center Pilot Light blank: No Engraving Contact Arrangement L: With Center Pilot Light 1: Top: I/ON Pilot Lamp Color Top Button Voltage Code A: Amber Y: Yellow Bottom: O/OFF blank: without center pilot light Button Arrangement 01: 1NC 02: 2NC G: Green blank: with- Pushbutton Color 11: Momentary (Flush/Flush) Full Voltage* Transformer* 10: 1NO 20: 2NO R: Red out center GR: Top: Green 12: Momentary (Flush/Extended) Bottom Button Q2: 6V LED H22: 120V AC LED S: Blue pilot light 01: 1NC 02: 2NC *For additional voltage codes, please see previous page Bottom: Red 21: Interlock (Flush/Flush) W: White 10: 1NO 20: 2NO WB: Top: White 22: Interlock (Flush/Extended) Bottom: Black Note: Use only for interpreting part numbers. Do not use for developing part numbers. Dual Pushbutton Switches (Sub-assembled) Part Numbers Safety Lever Contact Blocks + Mounting Adaptor + + Operator + Lens = Completed Unit Lock Lamp Circuit Components with Finger-Safe Terminals Contact Blocks Part Num- Style Contacts 1NO 1NC Style Contacts 1NO 1NC Style Description ber HW-U10 HW-U01 Dummy Spring-Up For use with HW-CBL HW-DB HW-U10R HW-U01R Block Terminal on all illuminated (early make) (late break) Lead Holder pushbutton units. HW-LH3 One required for each deck (pair) of contacts. Contact Block Mounting Adaptor Lamps/Lens Dummy Block For use with odd Style Voltage Part Number Style Part Number with Full Voltage HW-DA1FBN number of contacts. Adaptor 6V AC/DC LSTD-6N Non-illuminated HW-CB2C 12V AC/DC LSTD-1N Full Voltage For use with even Illuminated (with TW-DA1FB HW-CBL 24V AC/DC LSTD-2N Adaptor number of contacts. Pilot Light) 120V AC LSTD-H2N 1. Used to mount contact blocks to operator (first pair only). 240V AC LSTD-M4N Transformer Unit 120VAC TW-F126B 2. IDEC strongly recommends using the safety (6V secondary 240VAC TW-F246B lever lock (included) to prevent heavy vibration Non- HW9Z-B7B or maintenance personnel from inadvertently voltage) 480VAC TW-F486B illuminated unlocking contacts. Safety Lever Lock Illuminated HW9Z-L7W Style Part Number Operators 1. In place of N, specify the LED Color Code. Style Button Part Number HW9Z-LS 2. The LED contains a current-limiting resistor and reverse polarity protection Flush (top) diodes. HW7D-*11P-Q Anti-Rotation Ring Flush (bottom) Appearance Part Number NLED Color Code Flush (top) Instead of * insert: HW7D-*12P-Q Color Code Color Code Extended (bottom) B: Non-illuminated HW9Z-RL Amber A Blue S L: Illuminated Flush (top) HW7D-*21P-Q Green G White W Flush (bottom) Use with notched panel cutout to prevent Red R unit rotation. Flush (top) HW7D-*22P-Q Extended (bottom) QEngraving Codes Engraving Code PPushbutton Color Code No Engraving Blank Color Code Color Code I/ON Top 1 Top Green Top White O/OFF Bottom GR WB Bottom Red Bottom Black 1804091617 800-262-IDEC (4332) • USA & Canada 651 Interlock Momentary LED ø22mm - HW Series Switches & Pilot Devices Contact Arrangement Chart Contact Block Mounting Position Example Contact Arrangement Contact Block Top Button Bottom Button Mounting Position 4 Top Button Bottom Button Contact Code Mounting Position Type Normal Push Normal Push Mounting Position 2 1 NO X 1NO 1NO 1010 2 NO X 1 NO X Mounting Position 3 1NO 1NC 1001 2 NC X Mounting Position 1 1 NC X 1NC 1NO 0110 2 NO X 1 NC X 1NC 1NC 0101 2 NC X 1 NO X 2 NO X 1NO 2NO 1020 3 Dummy 4 NO X 1 NO X 2 NO X 1NO 1NO-1NC 1011 3 Dummy 4 NC X 1 NO X 2 NC X 1NO 2NC 1002 3 Dummy 4 NC X 1 NC X 2 NO X 1NC 2NO 0120 3 Dummy 4 NO X 1 NC X 2 NO X 1NC 1NO-1NC 0111 3 Dummy 4 NC X 1 NC X 2 NC X 1NC 2NC 0102 3 Dummy 4 NC X 1 NO X 2 NO X 2NO 1NO 2010 3 NO X 4 Dummy 1 NO X 2 NC X 2NO 1NC 2001 3 NO X 4 Dummy 1 NO X 2 NO X 1NO-1NC 1NO 1110 3 NC X 4 Dummy 1 NO X 2 NC X 1NO-1NC 1NC 1101 3 NC X 4 Dummy 1. Transformers can have two or four contact blocks only. 2. Contact blocks 1 and 3 are actuated by the top button. Contact blocks 2 and 4 are actuated by the bottom button. 1804091617 www.IDEC.com 652 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Contact Arrangement Chart (con’t) Contact Block Mounting Position Example Contact Arrangement Contact Block Top Button Bottom Button Mounting Position 4 Bottom Contact Mounting Mounting Position 2 Top Button Type Normal Push Normal Push Button Code Position 1 NC X 2 NO X 2NC 1NO 0210 Mounting Position 3 3 NC X Mounting Position 1 4 Dummy 1 NC X 2 NC X 2NC 1NC 0201 3 NC X 4 Dummy 1 NO X 2 NO X 2NO 2NO 2020 3 NO X 4 NO X 1 NO X 2 NO X 2NO 1NO-1NC 2011 3 NO X 4 NC X 1 NO X 2 NC X 2NO 2NC 2002 3 NO X 4 NC X 1 NO X 2 NO X 1NO-1NC 2NO 1120 3 NC X 4 NO X 1 NO X 2 NO X 1NO-1NC 1NO-1NC 1111 3 NC X 4 NC X 1 NO X 2 NC X 1NO-1NC 2NC 1102 3 NC X 4 NC X 1 NC X 2 NO X 2NC 2NO 0220 3 NC X 4 NO X 1 NC X 2 NO X 2NC 1NO-1NC 0211 3 NC X 4 NC X 1 NC X 2 NC X 2NC 2NC 0202 3 NC X 4 NC X 1804091617 800-262-IDEC (4332) • USA & Canada 653 ø22mm - HW Series Switches & Pilot Devices Contactor Reset Button Reset Buttons (Assembled) M Button Color Code Plastic Bezel Metal Bezel Color Code Color Code (Blank) HW1B-M1RS-MT HW4B-M1RS-MT Black B White W Engraved “R” HW1B-M1RS-MT-ENG-R HW4B-M1RS-MT-ENG-R Green G Yellow Y 1. In place of M specify Button Color Code. 2. 130mm (5.1”) overall length. Red R 3. 16mm flat base for easy alignment Blue S Contactor Reset Button (Sub-assembled) Rod + Operator + Button = Completed Unit Rod Button Style Part Number Style Part Number HW9Z-RS-TK2141 HW1A-B1-M Operator In place of M, specify the Button Style Plastic Metal Color Code from table. M Button Color Code Color Code Color Code Black B White W HW1B-MO HW4B-MO Green G Yellow Y Red R Blue S 1804091617 www.IDEC.com 654 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22 ø22mm - HW Series Switches & Pilot Devices Nameplates - HW Series HWAM–Black Plastic HWAQ–Black Plastic HWAS–Black Plastic HWAV–Yellow Plastic Engraving Plate Engraving Plate 29 29 45 1.6 0.9 27 2.7 27 2.7 22mm R14.9 R14.9 1.9 1 1.5 1 Nameplate (blank HWAV-O engraving plate HWAM-OB HWAQ-OB HWAS-OB HWAV5-0† included) Nameplate HWAV-27* HWAM-M HWAQ-M HWAS-M (engraved) HWAV5-27† Additional Insert HWNP Dimensions HWNP-O HWNP-O (blank) 27 Additional Insert HWNP-M HWNP-M (engraved) 1. In place of M, insert either the standard legend code from table below or custom engraving delimited by “ “. 2. Standard engravings are available at no charge. 3. * HWAV-27 comes engraved “Emergency Stop” as shown in drawing. 4. † HWAV5-27 and HWAV5-0 for 60mm diameter E-Stops (80mm diameter nameplate). Standard Legend Codes Pushbuttons Pushbuttons/Selector Switches Selector Switches Legend Code Legend Code Legend Code Legend Code Legend Code AUTO 101 OPEN 116 AUTO-MAN 201 REV-FOR 216 AUTO-MAN-OFF 301 CLOSE 102 OUT 117 CLOSE-OPEN 202 RUN-JOG 217 AUTO-OFF-MAN 302 DOWN 103 RAISE 118 DOWN-UP 203 RUN-SAFE 218 CLOSE-OFF-OPEN 303 EMERG.STOP 104 RESET 119 FAST-SLOW 204 SAFE-RUN 219 DOWN-OFF-SLOW 304 FAST 105 REVERSE 120 FOR-REV 205 SLOW-FAST 220 FAST-OFF-SLOW 305 FORWARD 106 RUN 121 HAND-AUTO 206 START-STOP 221 FOR-OFF-REV 306 HAND 107 SLOW 122 HIGH-LOW 207 STOP-START 222 LEFT-OFF-RIGHT 307 HIGH 108 START 123 JOG-RUN 208 UP-DOWN 223 LOWER-OFF-RAISE 308 IN 109 STOP 125 LEFT-RIGHT 209 OI (Int’l OFF ON) 250 OFF-MAN-AUTO 309 INCH 110 TEST 126 LOWER-RAISE 210 OFF-SLOW-FAST 310 JOG 111 UP 127 MAN-AUTO 211 OFF-1-2 311 LOW 112 I (Int’l On) 150 OFF-ON 212 OPEN-OFF-CLOSE 312 LOWER 113 O (Int’l Off) 151 ON-OFF 213 SLOW-OFF-FAST 313 OFF 114 EMO 152 OPEN-CLOSE 214 SUMMER-OFF-WINTER 314 ON 115 RAISE-LOWER 215 UP-OFF-DOWN 315 1-OFF-2 316 HAND-OFF-AUTO 317 1. To order engraved nameplates, add legend code to nameplate part number. 2. Character height based on the number of characters and size of nameplate. Standard character size is 3/16”. 3. Nameplates with standard legends are the same list price as blank nameplates. 4. Nameplates have built-in anti-rotation feature for use with notched panel cut-outs. Additional anti-rotation ring (HW9Z-RL) is not necessary. 1804091617 800-262-IDEC (4332) • USA & Canada 655 ø22 ø22 30 12.1 14.5 14.9 30 12.1 14.5 14.9 12 ø60mm ø22mm - HW Series Switches & Pilot Devices Nameplates Order Form — HW Series Copy this order form and use it to specify Letter Height, Custom Engravings, Location of Engraving on Nameplate, and Quantity Desired. To ensure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: IDEC Rep/Distributor Contact: Name: PO number (if known): Telephone: IDEC Rep/Distributor Phone: Fax & Email: IDEC Rep/Distributor Fax & Email: HWAM Nameplate 7/64” Step 1. 11 characters maximum Letter Engraving Choose Letter Size - 7/64” or 1/8”. (for 7/64” size letters) Size Location Check the box for the letter size you want. Then write your lettering in box below the 1/8” 9 characters maximum check boxes. Note: 1/8” size letters cannot Letter (for 7/8” size letters) exceed 9 characters. Size Step 2. Sample Letter Sizes Specify Quantity. 7/64” Letters: A B C D Enter the number of nameplates Qty 1/8” Letters: A B C D desired in the box on the right. 1 2 3 4 5 6 7 8 9 10 11 HWAQ Nameplate 7/64” Step 1. 11 characters maximum Letter Engraving Choose Letter Size - 7/64” or 1/8”. (for 7/64” size letters) Size Check the box for the letter size you want. Location Then write your lettering in box below the 1/8” 9 characters maximum check boxes. Note: 1/8” size letters cannot Letter (for 1/8” size letters) exceed 9 characters. Size Step 2. Sample Letter Sizes Specify Quantity. 7/64” Letters: A B C D Enter the number of nameplates Qty desired in the box on the right. 1/8” Letters: A B C D 1 2 3 4 5 6 7 8 9 10 11 HWAS Nameplate 3/32” Step 1. 20 characters maximum Letter Choose Letter Size - 3/32” or 1/8”. (for 3/32” size letters) Engraving Location A Size Check the box for the letter size you want. Then write your lettering in box below the 1/8” 14 characters maximum check boxes. Note: 1/8” size letters cannot Letter (for 1/8” size letters) exceed 14 characters. Size Step 2. Specify Quantity. Qty Enter the number of nameplates 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 A desired in the box on the right. Engraving Location B Step 3. Specify Location. Location Enter the location of engraving 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 B (A or B or Both), in box on the right. Sample Letter Sizes 3/32” Letters: A B C D 1/8” Letters: A B C D 1804091617 www.IDEC.com 656 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Switch Engraving Order Form – HW Series Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved. To ensure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: Telephone: Name: Fax: Address: Email: PO: Part Number to be Engraved: Please check one of the boxes below to indicate your choice of engraving options: ø29mm, ø40mm Mushroom Head Engraving Engraving Square Round Area 1 Switch Switch † Area 2 Letter Max. Characters # of Letter Max. Characters # of Letter Max. Characters # of Lines Height Per Line Lines Height Per Line Lines Height Per Line 5/32 5 5/32 5 5/32 5 Engraving 1 1 1 Area 1 1/8 6 1/8 5 1/8 5 5/32 5 5/32 5 5/32 7 Engraving 2 2 1 Area 2 1/8 6 1/8 6 1/8 7 3 1/8 6 3 1/8 5 4 3/32 5 4 3/32 5 1. Above mentioned specifications hold true for standard size pushbuttons (round and square). † 2. Engraving Area 2 can be engraved for 40mm mushroom Head non-Illuminated push button only. 3. Engraving is done on the button itself for non-Illuminated push buttons and on marking plate for illuminated push buttons and pilot lights. 4. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters. Enter text to be engraved: Sample Letter Sizes 1/8 Letters: Line 1: 5/32 Letters: Line 2: Line 3: Line 4: For IDEC Internal Use Only: Work Order #: 1804091617 800-262-IDEC (4332) • USA & Canada 657 ø22mm - HW Series Switches & Pilot Devices Accessories Item Appearance Description/Usage Part Number Metallic tool used to tighten the plastic locking ring when installing the HW Locking Ring Wrench MW9Z-T1 series in a panel Lamp/LED Removal Rubber tool makes lamp/LED removal easier. OR-55 Tool for notched panel HW9Z-RL Prevents rotation of switches in panel. (included with all assembled cutout (standard) Anti-Rotation Ring switches except pilot lights) for round panel cutout LW9Z-L Rubber Mounting Black rubber plug fills unused 7/8” mounting holes in panel. OB-31 Hole Plug For plugging unused 7/8” mounting holes in the panel. Tighten the attached Metallic Mounting locking ring to a torque of 12 kfg-cm maximum LW9Z-BM Hole Plug Degree of protection: IP66 Flush Pushbuttons OC-31 Used to cover and protect pushbuttons Pushbutton Clear Boot Operating temperature: –50 to +60°C Extended Pushbuttons OC-32 Plastic hinged padlockable cover to protect pushbuttons or selector switches. (Not intended for E-Stops) Padlock Cover HW9Z-KL1 Degree of protection: IP65 Tab Terminal Adapter Tab #250 (6.35 x 0.8mm): Single tab TW-FA4 22 to 30mm HW9Z-A30 Used to mount round HW series (except Jumbo Mounting Adaptor Mushroom, unibody, and square units) into a larger panel cut-out. (includes both pieces) 22 to 25mm HW9Z-A25 Replacement Safety Used to prevent contact mounting lever from moving due to heavy vibration HW9Z-LS Lever Lock or panel maintenance. Reset Rod for 5” rod used with HW1B-M0. HW9Z-RS-TK2141 Contactors Overload Replacement Provided with operator. Insert between bezel and locking ring. HWM-WASHER Operator Washer Standard (plastic) HW9Z-LN Replacement Locking Plastic locking nut comes with all HW operators & assemblies. Ring Optional (metal) HW9Z-LNM Switch Cover HW9Z-K1 (spring return) Used only with round or square flush pushbuttons. (Square) HW9Z-K11 (maintained cover) Replacement Keys Pair of Keys (#231) HW9Z-SKP Replacement Lens HW Illuminated Unibody Replacement Lens HWLV-LENSR 1804091617 www.IDEC.com 658 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22mm - HW Series Switches & Pilot Devices Item Appearance Description/Usage Part Number Replacement Jumbo HW1A-P5M Dome Lens M = (A, G, R, S, W, Y)) Polycarbonate Replacement Lens (If using yellow lens, use white LED.) Replacement Jumbo HW9Z-PP5C LED Diffusing Lens Replacement LED LSTDB-2M Lamps for HW Replacement LED Lamp - applicable for jumbo pilot lights only M = (A, G, R, S, W) Jumbo Dome Rubber Cover for Clear Silicon rubber cover HW9Z-D7D Dual Pushbuttons Barrier for Dual Plastic barrier. Used when mounting the HW7 units on 30mm horizontal HW-VU1 Pushbuttons centers, to prevent possible interconnections between adjoining terminals. EMO Sticker Emergency stop nameplate sticker HW9Z-EMO-NP-TK2120 EMO E-Stop Shrouds Applicable Applicable Style Part Numbers E-Stop Types Style Part Numbers E-Stop Types Standards Standards 40mm SEMI S2-0703, 40mm SEMI S2 Compliant HW9Z-KG1 HW9Z-KG3 Mushroom Head (Approved by TUV) Mushroom Head 12.5.1 Compliant 40mm, SEMI S2 Compliant SEMI S2-0703, 12.5.1 & 40mm HW9Z-KG2 HW9Z-KG4 (Approved by TUV) and 60mm Mushroom Head SEMATECH Compliant Mushroom Head & SEMATECH Contact Assemblies Standard Contact Assemblies Full Voltage Contact Assemblies For use with Non-Illuminated Pushbuttons & E-Stops For use with Illuminated Pushbuttons. Style Contacts Part Number Style Contacts Part Number 1NO HW-CBF10 1NO HW-FL10Q0 Standard Finger-Safe Contacts 1NC HW-CBF01 2NO HW-FL20Q0 1NO/1NC HW-CBF11 1NO/1NC HW-FL11Q0 2NO HW-CBF20 1NC HW-FL01Q0 2NC HW-CBF02 2NC HW-FL02Q0 2NO/2NC HW-CBF22 Order LED separately. Gold contact option is available. Add suffix “MAU” to end of part number. For example, HW-CBF20 becomes HW-CBF20-MAU. 1804091617 800-262-IDEC (4332) • USA & Canada 659 LOCK LOCK LOCK LOCK LOCK LOCK LOCK ø22mm - HW Series Switches & Pilot Devices Transfomer Contact Assemblies For use with Illuminated Pushbuttons. Style Contacts Part Number 1NO HW-FL10H2-N 120V AC 2NO HW-FL20H2-N with LED 1NC HW-FL01H2-N 1NO/1NC HW-FL11H2-N 1NO HW-FL10M4-N 240V AC 2NO HW-FL20M4-N with LED 1NC HW-FL01M4-N 1NO/1NC HW-FL11M4-N 1NO HW-FL10T8-N 480V AC 2NO HW-FL20T8-N with LED 1NC HW-FL01T8-N 1NO/1NC HW-FL11T8-N 1. In place of N, specify the LED Color Code. N = A, G, R, S, or W 2. 6V LED included. Dimensions (mm) Non-Illuminated Pushbuttons Flush (HW1B-M1, -A1) Extended (HW1B-M2, -A2) ø29mm Mushroom (HW1B-M3 -A3) Locking Ring Locking Ring Locking Ring Safety Lever Lock Panel Thickness 0.8 to 6 Safety Lever Lock Panel Thickness 0.8 to 6 Safety Lever Lock Panel Thickness 0.8 to 6 29.4 ø23.6 49.4 (1 or 2 blocks) 13 49.4 (1 or 2 blocks) 13 49.4 (1 or 2 blocks) ø23.6 29.4 69.4 (3 or 4 blocks) 13 29.4 69.4 (3 or 4 blocks) 69.4 (3 or 4 blocks) 19 23.2 ø40mm Mushroom (HW1B-M4, -A4) ø60mm Mushroom (HW1B-M5) Square Flush (HW2B-M1, -A1) Locking Ring Panel Thickness 0.8 to 6 Locking Ring Safety Lever Lock Panel Thickness 0.8 to 6 Locking Ring Safety Lever Lock Safety Lever Lock Panel Thickness 0.8 to 6 29.4 49.4 (1 or 2 blocks) 13 49.4 (1 or 2 blocks) …24.8 29.4 69.4 (3 or 4 blocks) 13 49.4 (1 or 2 blocks) 29.4 15 69.4 (3 or 4 blocks) 23.2 69.4 (3 or 4 blocks) 30.1 Square Extended (HW2B-M2, -A2) Contact Block (Bottom View) Terminal Wiring Arrows indicate access directions for wiring Locking Ring Safety Lever Lock Panel Thickness 0.8 to 6 1 contact block 2 contact blocks 4 contact blocks 49.4 (1 or 2 blocks) 13 …24.8 69.4 (3 or 4 blocks) 19 29.4 1804091617 www.IDEC.com 660 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices 41.4 41.4 41.4 ø29 ø40 26.5 25 26.5 26.5 25 25 …29.6 41.4 41.4 ø29 ø60 26.5 25 26.5 25 41.4 41.4 ø29 26.5 26.5 25 25 …29.6 Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers LOCK LOCK LOCK LOCK LOCK LOCK LOCK LOCK LOCK ø22mm - HW Series Switches & Pilot Devices Operators Dimensions (mm) Flush (Round & Square) Extended Round Square Panel Thickness 0.8 to 6 Extended 13 29.4 13 18.5 24.8 29.4 29.4 Extended with Full Shroud ø40mm Mushroom 29.4 13 29.4 18.5 23.2 Emergency Stop Pushbuttons Dimensions (mm) ø29mm Head Pushlock Turn Reset (HW1B-V3) Panel Thickness 0.8 to 6 Gasket Terminal Screw M3.5 Locking Ring ( ) 50.2 1 or 2 blocks 13 29.4 1 contact block 2 contact blocks 4 contact blocks 70.2 (4 blocks) 32 ø40mm Head Pushlock Turn Reset (HW1B-V4) ø40mm Head EMO Pushlock Turn Reset (HW1B-V4) Lock Lever Locking Ring 50.2 (1 or 2 blocks) 13 29.4 70.2 (4 blocks) 32 13 29.4 32 ø40mm Head Pushlock Key Reset (HW1B-X4) ø60mm Head Pushlock Turn Reset (HW1B-V5) 13 29.4 32 15 49.4 34.5 1804091617 800-262-IDEC (4332) • USA & Canada 661 ø23.6 ø23.6 ø23.6 ø40 ø29.5 25 25 ø40 41.4 25 ø40 41.4 25 25 29.6 41.4 41.4 41.4 ø29 ø23.5 25 ø40 25 25 ø60 26.5 41.4 25 41.4 41.4 20 41.4 LOCK +0.4 0 ø22.3 ø22mm - HW Series Switches & Pilot Devices ø40mm Head Push-Pull (HW1B-Y2) ø40mm Head Unibody Pushlock Turn Reset (HW1B-BV4) Panel Thickness 0.8 to 6 Gasket M3.5 Terminal Screw Locking Ring 13 29.4 25.5 TOP Marking 11.5 14 Terminal Cover 46 32 48 Illuminated E-Stop Pushbuttons (HW1E-LV4) Mounting Hole Panel Thickness 0.8 to 6 The minimum mounting centers shown R0.8 max. +0.2 below are applicable to E-Stop switches M3.5 Terminal Screw Gasket 3.2 0 with one layer of contact blocks (two Locking Ring contact blocks). When two layers of TOP Marking contact blocks are mounted, determine the minimum mounting centers for ease of wiring. Unit Vertical Spacing Horizontal Spacing M3.5 Terminal Screw HW1B-V3 Lamp Terminal HW1B-V4 11.5 14 50 mm 50 mm HW1B-X4 Terminal Cover 61 32 HW1B-Y2 63 HW1B-V5 60 mm 60 mm Terminal Arrangement (Bottom View) HW1E-BV4 Side HW1E-LV4 TOP X1 LAMP .2 (NC) .3 (NO) .2 (NC) .3 (NO) .1 (NC) .4 (NO) .1 (NC) .4 (NO) X2 (1NO-1NC) (1NO-1NC) 1804091617 www.IDEC.com 662 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices ø40 25 41.4 ø 40 +0.4 24.1 0 ø40 Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø23.5 ø23.6 ø23.5 ø23.6 2-ø4.6 ø23.6 ø23.5 ø22mm - HW Series Switches & Pilot Devices Emergency Stop Stations Dimensions (mm) A 59.5 76 Mounting Hole Layout Operator Dimension A (mm) 4-M4 Tapped Holes for Rear Mounting (Depth: 10 mm) Pushlock Turn Reset 32 2-Front Mounting Holes Pushlock Key Reset 32 (Key inserted: 49.4) ø14 Knockout Push Pull 25.5 HW1B-V4R Box Cover Mouting Screws Box Cover Box Base 15.5 62 Pilot Lights Dimensions (mm) Round Flush Terminal screws: M3.5, integrated terminal cover 6, 12, 24V AC/DC, Without LED lamp 100/110V AC, 200/220V AC (240V AC maximum) 110V DC, 380V AC minumum Panel Thickness 0.8 to 6 Panel Thickness 0.8 to 6 Gasket Gasket Panel Thickness 0.8 to 6 Gasket Locking Ring Locking Ring Locking Ring 11.5 76.2 7 29.6 7 60.8 7 29.6 43.3 Extended Terminal screws: M3.5, integrated terminal cover 6, 12, 24V AC/DC, Without LED lamp 100/110V AC, 200/220V AC (240V AC maximum) 110V DC, 380V AC minimum Panel Thickness 0.8 to 6 Panel Thickness 0.8 to 6 Gasket Panel Thickness 0.8 to 6 Gasket Gasket Locking Ring Locking Ring Locking Ring 11.5 60.8 17.5 29.6 76.2 17.5 29.6 43.3 17.5 Square Flush Terminal screws: M3.5, integrated terminal cover 6, 12, 24V AC/DC, Without LED lamp 100/110V AC, 200/220V AC (240V AC maximum) 110V DC, 380V AC minimum Panel Thickness 0.8 to 6 Panel Thickness 0.8 to 6 Panel Thickness 0.8 to 6 Gasket Gasket Gasket Locking Ring Locking Ring Locking Ring …24.6 11.5 60.8 7 …29.6 76.2 7 …29.6 43.3 7 …29.6 Jumbo Dome Pilot Light Terminal screws: M3.5, integrated terminal cover Panel Thickness 1 to 5 LED Lamp LSTDB Mounting Hole Layout Mounting Hole Layout +0.2 Base BA9S/13 R0.8 max. 3.2 0 Close mounting on 30mm centers Light blue: +0.4 Illumination Color ø22.3 0 LSTDB Degree of protection: IP65 20.4 Locking Ring Gasket 85 0.5 34.4 50.5 30 min. When mounting transformer or DC-DC converter type units on 30mm centers vertically and horizontally, keep the ambient temperature below 40ºC. 1804091617 800-262-IDEC (4332) • USA & Canada 663 +0.4 ø22.3 0 ø29 ø29 ø66 ø29 ø29 ø29 ø29 76 …24.6 ø10.6 24 24 …24.6 85 +0.4 24.1 0 21 30 min. 24 24 21 41 X1 X2 ø22mm - HW Series Switches & Pilot Devices Illuminated Pushbuttons Full Voltage Models 1 Contact Block 2 Contact Blocks 3 Contact Blocks Full Voltage Adapter Full Voltage Adapter Full Voltage Adapter M3.5 Terminal Screw M3.5 Terminal Screw M3.5 Terminal Screw Panel Contact Block Contact Block Panel Locking Ring Panel Locking Ring Thickness Contact Block Locking Ring Thickness Thickness 0.8 to 6 0.8 to 6 0.8 to 6 50.2 (1 block) 70.2 (3 blocks) 1 contact block 65.8 (2 blocks) 3 contact blocks 2 contact blocks Illuminated Pushbuttons con’t Dimensions (mm) 4 Contact Blocks Terminal Wiring Arrows indicate access directions for wiring. Full Voltage Adapter Contact Block Full Voltage Adaptor Transformer M3.5 Terminal Screw Contact Block Panel Locking Ring Thickness 0.8 to 6 X1 X2 4 contact blocks 85.8 (4 contacts) Transformer Models DC-DC Converter Models Safety Lever Lock Locking Ring X1 X2 X1 X2 89.7 (2 blocks) M3.5 Terminal Screw M3.5 Terminal Screws 109.5 (4 blocks) 89.5 (2 blocks) 109.5 (4 blocks) 1804091617 www.IDEC.com 664 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices 3 4 Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers LOCK LOCK LOCK LOCK ø22mm - HW Series Switches & Pilot Devices Non-Illuminated Selector & Key Switches Dimensions (mm) Knob Operator Terminal Wiring Panel Thickness 0.8 to 6 Arrows indicate access directions M3.5 Terminal for wiring. Screw Gasket Locking Ring Contact Block Full Voltage Adaptor ( ) 48.5 1 or 2 blocks 7 29.4 1 contact block 2 contact blocks ( 4 contact blocks 68.5 3 or 4 blocks) 21 Key Operator Tranformer X1 X2 13 29.4 30.5 Illuminated Selector Switches Full Voltage Model Transformer Model M3.5 Terminal Screw X1 X2 7 ( ) M.3.5 Terminal 79.5 2 blocks 69.4 (2 blocks) 7 29.4 29.4 Screw 99.5 (4 blocks) 21 ( ) 89.4 4 blocks 21 1804091617 800-262-IDEC (4332) • USA & Canada 665 ø29.4 ø29 ø29 ø29 25 41.4 ø28.8 17 25 25 41.4 41.4 25 41.4 3 4 HW HW HW HW LOCK +0.4 0 ø22.3 ø22mm - HW Series Switches & Pilot Devices Dual Pushbutton Dimensions (mm) Without Pilot Light Mounting Hole Layout R0.8 max. +0.2 *3.2 0 49.4 (2 contacts) 69.4 (3 or 4 contacts) 30 Panel Thickness 0.8 to 6 Without Button With Button Markings Locking Ring Safety Lever Lock Markings (I/ON and O/OFF) ON -The 3.2 mm recess is for preventing rotation and is not necessary when a nameplate or anti-rotation ring is not used. OFF -When using the safety lever lock, Rubber Gasket determine the vertical spacing in 0.5 29.8 29.8 consideration of convenience for installing 14.5 and removing the safety lever lock. 20 -Recommended vertical spacing: 100 mm With Pilot Light -The minimum mounting centers are applicable to switches with one layer of Full Voltage contact blocks (two contact blocks). When Full Voltage Adapter The depth of a 3-contact model depends on the combination of two layers of contact blocks are mounted, contact blocks at top and bottom pushbuttons. determine the minimum mounting centers (Bottom Button) for ease of wiring. Top Button 1 contact block 2 contact blocks Bottom Button 2 contact blocks 1 contact block (Top Button) Depth 89.4 mm 69.4 mm 69.4 (2 contacts), 89.4 (4 contacts) (Note) Transfomer (240V minimum) Transformer (480V) Transformer Transformer, DC-DC Converter 89.5 (2 contacts), 109.5 (4 contacts) 79.5 (2 contacts), 99.5 (4 contacts) Monolever Dimensions (mm) M3.5 Terminal Locking Ring Panel Thickness 0.8 to 6 Screw 8 49.4 (2 blocks) 29.4 ( ) 69.4 4 blocks 72 45.5 1804091617 www.IDEC.com 666 ø34.2 24 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices 41.4 25 36 max. 36 max. 41.4 54.8 54.8 55 ** +0.4 24.1 0 24 Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø22.2 R66.5 ø22.2 ø22 LOCK ø22 ø90 ø22mm - HW Series Switches & Pilot Devices Accessory Dimensions LW9Z-BM OB-31 HW9Z-RL OR-55 Metallic Mounting Hole Plug Rubber Mounting Hole Plug Anti-Rotation Ring Lamp/LED Removal Tool ø25.8 ø29 1.5 TOP Gasket 59 Locking Ring ø25 HW9Z-D7D HW-VU1 MW9Z-T1 HW-VL1 Dual Pushbutton Rubber Cover Dual Pushbutton Barrier Locking Ring Wrench Barrier 22.5 33 110 1.5 20 20 1.5 HW9Z-KL1 HWLS-TK1971 Padlock Cover Safety Lever Lock Panel Thickness 82.5 Safety Lever Lock 0.8 to 3.2 Screwdriver Remove Safety Lever Lock Lever Lock Operator 24 29.5 Waterproof Rubber Key Hole ø8 Gasket 0.5t 30 Contact Block Panel Mounting Adapter HW9Z-KG1 HW9Z-KG2 64 38 36.5 48 22 Gasket TOP Marking TOP Marking Locking Ring Operator Panel Thickness: 1.2 to 4 Operator Panel Thickness: 1.2 to 4 HW9Z-KG3 HW9Z-KG4 LSTD 35 35 ø9.5 25 25 ø10.6 42 50 1804091617 800-262-IDEC (4332) • USA & Canada 667 ø22 ø29 ø22 ø28 ø50 (ID: ø44.4) 70 30 58 ø66 52 80 32 12 3 ø74 93 3.5 45 3.5 ø75 67 ø76.1 ø90 ø11.6 45 20.4 26.5 Install ø14 ø22mm - HW Series Switches & Pilot Devices Specification Charts Conforming to IEC 947-5-1 Appendix C. Utilization categories AC-15 and DC-13. Operation rate: 1,800 op. hour Load factor: Inductive 0.4 ± 0.05 Resistive 0.9 ± 0.05 Operator Truth Tables 2 Position Selector Switches 3 Position Selector Switches con’t Operator Operator Position Mounting Mounting Contact Position Contact Position Left Center Right Position Left Right L X O O HW-U10 L O X HW-U10 (NO) R O O X (NO) R O X L O X O HW-U01 L X O HW-U01 (NC) R O X O HW1S-3JT HW1S-2T (NC) R X O HW1K-3J* L X O X HW-U10R HW1K-2* L O X (NO-EM) HW-U10R HW1F-2 R X O X (NO-EM) R O X X L O X HW-U01R X L O (NC-LB) HW-U01R R X X O (NC-LB) R X O 4 Position Selector Switches 3 Position Selector Switches Operator Position Mounting Contact Operator Position Mounting Position 1 2 3 4 Contact Position Left Center Right L X O O O HW-U10 L X O O (NO) HW-U10 R O O O X (NO) R O O X L O O X O HW-U01 L O X X (NC) HW-U01 R O X O O HW1S-3T (NC) HW1S-4T X R X O L X X O X HW-U10R HW1K-3* L X O O (NO-EM) HW-U10R HW1F-3 R X O X X (NO-EM) R O O X L O X X X HW-U01R L O X X (NC-LB) HW-U01R X R X X O (NC-LB) R X X O 5 Position Selector Switches Operator Position Operator Position Mounting Mounting Contact Contact Position Position Left Center Right 1 2 3 4 5 L X O O L X O O O O HW-U10 HW-U10 (NO) (NO) R O O X R O O O O X L O O X L O O O X O HW-U01 HW-U01 (NC) (NC) R X O O R O X O O O HW1S-3ST HW1S-5T HW1K-3S* X L X O L X X X O X HW-U10R HW-U10R (NO-EM) (NO-EM) R O X X R X O X X X L O X X L O X X X X HW-U01R HW-U01R (NC-LB) (NC-LB) R X X O R X X X X O 1. Mounting position indicates which side of operator each contact should be mounted (as 3. HW1S-3T is identified by white plungers on the operator. viewed from the front of the panel). 4. HW1S-3ST is identified by red plungers on the operator. 2. *For key removable code see page 638. 5. HW1S-3JT is identified by black plungers on the operator. 1804091617 www.IDEC.com 668 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers LOCK ø22mm - HW Series Switches & Pilot Devices HW Safety Precautions Turn off power to HW series control units before starting installation, removal, To avoid the possibility of burning yourself, use the lamp holder tool when wiring, maintenance, and inspection of the products. Failure to turn power off replacing lamps. may cause electrical shocks or fire hazard. For wiring, use wires of a proper size to meet voltage and current requirements. HW General Instructions Panel Mounting Safety Lever Lock Remove the contact block assembly from the operator (for transformer type pilot IDEC strongly recommends using the safety lever lock (HW9Z-LS, yellow) to lights, remove the transformer from the illumination unit). Remove the locking prevent heavy vibration or maintenance personnel from unlocking the contact ring from the operator. Insert the operator into the panel cut-out from the front, assembly. tighten the locking ring from the back, then install the contact block assembly to 1. HW series can be mounted vertically with a minimum spacing of 55 mm the operator. but spacing should be determined to ensure easy operation (recommended minimum spacing: 100 mm). Removing and Installing the Contact Block Assembly 2. Mount the control unit onto the panel, lock the lever, and push in the safety 1. To remove the operator from the contact block, turn the locking lever in the lever lock to install. direction of the arrow shown below. The operator can now be removed. 3. When the spacing is narrower than the recommended value, with the lever un- 2. To reinstall, place the TOP markings on the operator and the contact block locked, mount the safety lever lock and insert the contact unit to the operator. mounting adapter in the same direction, and insert the operator into the Then, lock the lever and strongly push in the safety lever lock to install. contact block mounting adapter. Then turn the locking lever in the opposite 4. To remove the safety lever lock, insert a flat screwdriver into the safety lever direction. and push upwards. Safety Lever Lock Screwdriver Remove Safety Lever Lock Lever Lock Operator Contact Block Panel Mounting Adapter Notes for Panel Mounting 1. When mounting the operator onto a panel, use the optional locking ring wrench (MW9Z-T1) to tighten the locking ring. Tightening torque must not exceed 2.0 N·m. Do not use pliers. Excessive tightening will damage the locking ring. 2. For the contact blocks and transformers housing LED lamps, make sure not to press the lamps too hard, otherwise the lamp socket may be damaged. Dual Pushbutton Instructions Replacement of Lens Removing Remove the lens by inserting a screwdriver into the recess of the lens through the bezel. Installing Install the lens in the recess between the buttons by pressing against the bezel. 1804091617 800-262-IDEC (4332) • USA & Canada 669 26.5 Install ø22mm - HW Series Switches & Pilot Devices Dual Pushbuttons Instructions continued Replacement of Lamps Installation of LED Illuminated Units When using full voltage type LED illuminated units, provide protection against LED lamps can be replaced by using the lamp holder tool (OR-55) from the front electrical noise, if necessary. of the panel, or by removing the contact block assembly from the operator unit. Applicable Wiring Removing the Lamps from the Front of the Panel 2 2 The applicable wire size is 2 mm maximum. (solid wire ø1.6mm maximum) One or two wires can be connected. Removal Applicable Crimping Terminal 1. To remove, slip the lamp ø3.6 min. holder tool onto the lamp head lightly. Then push slightly, and turn the lamp holder tool counterclock- 4 max. 5.5 min. wise. Be sure to use an insulation tube or cover on the crimping part of the crimping terminal to prevent electrical shocks. Installation 1. To install, insert the lamp Solid Wire Lamp Lamp Holder Tool head into the lamp holder tool, and hold the lamp as shown in the figure below. 8 max. 2. Place the pins on the lamp Lamp Base Note: When connecting wires to contact blocks or transformers in the direction base to the grooves in the shown below, keep the insulation stripping length 6.6 mm at the maximum. lamp socket. Insert the lamp and turn it clockwise. About Dual Pushbutton Switches X1 X2 X1 X2 Do not attempt The dual pushbuttons cannot to remove the pushbuttons! be removed or replaced! Inside Inside Pushbuttons Do not attempt to remove Installing the Rubber Boot using a flat screwdriver or When using the HW7D pushbuttons in places where the pushbuttons are pincers, otherwise the dual subjected to water splash or an excessive amount of dust, make sure to use the pushbuttons may be damaged. HW9Z-D7D rubber boot (IP65) which is ordered separately. Narrow Mounting Notes for Installing the Rubber Boot When mounting the units closely in a horizontal row on 30mm centers, use op- Remove the gasket from the operator, and install the rubber boot on the operator. tional barriers to prevent interconnection between adjoining terminals. The barri- Pull out the seals of the rubber boot and place them around the operator sleeve ers can be attached simply by pressing them onto the sides of contact blocks. as shown. Make sure that the seals are not twisted or tucked inside and that 30 30 the gasket does not remain, otherwise the normal waterproof and dustproof characteristics are not ensured. 1. Remove the gasket. 2. Install the rubber boot 3. Rubber boot is on the pushbuttons. installed. Seals Install Barrier Remove When mounting transformer type illuminated units closely in a horizontal row on 30-mm centers, insert solid wires or stranded wires Seals Gasket X1 X2 X1 X2 into inside of the terminal screw on the transformer (see figure on the right) to prevent short circuit between adjoining terminals. Inside Inside 1804091617 www.IDEC.com 670 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices ø1.6 max. 7.9 max.