Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices L6 Series — Miniature Switches and Pilot Devices Key features of the 5/8” L6 Series include: • 5/8” (16mm) mounting holes • Locking lever removable contact blocks • Solder terminal or PCB terminal options • Available assembled or as sub-components • Worldwide approvals • Incandescent or LED illumination • Snap action contacts UL Recognized CSA Certifi ed File No. E55996 File No. LR21451 Registration No. R9551089 (E-stops) Registration No. J9551458 (all other switches) Registration No. R95650511 (Pilot Lights) Conforming to Standards EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 N0.14 Operation: –25 to +55°C (without freezing), 45 to 85% RH Operating Temperature Storage: -30 to +80°C (without freezing) Vibration Resistance 5 to 55Hz, 1.0 peak-peak amplitude max 2 Operating limit: 100 m/sec (approximately 10G) Shock Resistance 2 Damage limit: 1000 m/sec (approximately 100G) Momentary pushbuttons 2,000,000 operations minimum Mechanical Life All others: 250,000 operations minimum Degree of Protection IP65 (conforming to IEC 60529) Switch unit: between live and ground: 2500 volt AC, 1 minute between terminals of different poles: 2500 volt AC, 1 minute Dielectric Strength between terminals of same pole: 1000 volt AC, 1 minute Illumination unit: between live part and ground: 2500 volt AC, 1 minute Insulation Resistance 100MΩ minimum (using 500V DC megger) Rated Insulation Voltage 250V AC/DC Gold Contacts (pcb): 3A Rated Thermal Current Silver Contacts (solder): 5A Contact Resistance 50Ω maximum initial value Silver Contacts Gold Clad Contacts (Solder Terminals) (PCB terminals) 30V 125V 250V 30V 125V Rated Operating Current AC resistive — 5A 2A AC inductive - 0.1A AC inductive — 2A 1.5A DC resistive 0.1A — DC resistive 3A 0.4A — DC inductive 1A 0.2A — Minimum Recommended Load (reference value for silver 5V AC/DC, 1mA contacts) Terminal Style 0.110” Solder Tab /PCB Contact Form Snap Action, Double Throw Contact Material Solder Tab: Pure Silver /PCB: Gold Plated Silver Momentary pushbuttons: 100,000 operations minimum (1800 operations / hour) Electrical Life (at full load) All others: 100,000 operations minimum (1200 operations / hour) 5V DC LED: 8mA 6V AC/DC LED: 7mA 6V AC/DC incandescent: 100 mA Lamp Current Draw 12V AC/DC LED: 8mA 12V AC/DC incandescent: 50 mA 24V AC/DC LED: 8mA 24V AC/DC incandescent: 25 mA 120V AC = 8mA Lamp Life Incandescent: 2000 hours./LED 50,000 hours. (on pure DC, half-life intensity) USA: 800-262-IDEC Canada: 888-317-IDEC 471 Lamp Ratings Contact Ratings ø16mm - L6 Series Switches & Pilot Devices Built-in LED Lamp Ratings Model LFTD-5k LFTD-1k LFTD-2k LFTD-H2k Lamp Base SX6S/8x5.4 Rated Voltage 5V DC 12V AC/DC 24V AC/DC 120V AC Operating Voltage 5V DC ±5% 12V AC/DC ±10% 24V AC/DC ±10% 120V AC ±5% AC — 9mA 9mA 8mA Current Draw DC 8mA 8mA 8mA — Color Code k Specify a color code in place of k in the Part No: A (amber), G (green), R (red), S (blue), W (white), Y (yellow) Lamp Base Color Same as illumination color Voltage Marking Stamped on the lamp base Life (reference value) Approx. 50,000 hours A, R, W, Y A, R, W, Y (+) (–) LED Chip Internal Circuit Protection Diode G, S G, S Zener Diode (+) (–) Non-Illuminated Pushbuttons (Assembled) Non-Illuminated Pushbuttons Terminal Style Terminal Style Style Operation Contact Style Operation Contact Solder Tab PCB Solder Tab PCB Round SPDT LA1B-M1C5-j LA1B-M1C1V-j Oversize Round SPDT HA1B-M2C5-j HA1B-M2C1V-j Momentary Momentary Extended DPDT LA1B-M1C6-j LA1B-M1C2V-j DPDT HA1B-M2C6-j HA1B-M2C2V-j SPDT SPDT LA1B-A1C5-j LA1B-A1C1V-j HA1B-A2C5-j HA1B-A2C1V-j Maintained Maintained DPDT LA1B-A1C6-j LA1B-A1C2V-j DPDT HA1B-A2C6-j HA1B-A2C2V-j Square SPDT LA2B-M1C5-j LA2B-M1C1V-j Momentary Oversize Square Flush SPDT HA2B-M1C5-j HA2B-M1C1V-j DPDT LA2B-M1C6-j LA2B-M1C2V-j Momentary DPDT HA2B-M1C6-j HA2B-M1C2V-j SPDT LA2B-A1C5-j LA2B-A1C1V-j Maintained SPDT HA2B-A1C5-j HA2B-A1C1V-j DPDT LA2B-A1C6-j LA2B-A1C2V-j Maintained DPDT HA2B-A1C6-j HA2B-A1C2V-j Rectangular SPDT LA3B-M1C5-j LA3B-M1C1V-j Momentary Oversize Square SPDT HA2B-M2C5-j HA2B-M2C1V-j DPDT LA3B-M1C6-j LA3B-M1C2V-j Momentary Extended DPDT HA2B-M2C6-j HA2B-M2C2V-j SPDT LA3B-A1C5-j LA3B-A1C1V-j Maintained SPDT HA2B-A2C5-j HA2B-A2C1V-j DPDT LA3B-A1C6-j LA3B-A1C2V-j Maintained Oversize Round Flush DPDT HA2B-A2C6-j HA2B-A2C2V-j SPDT HA1B-M1C5-j HA1B-M1C1V-j Momentary DPDT HA1B-M1C6-j HA1B-M1C2V-j Mushroom SPDT HA1B-M3C5-j HA1B-M3C1V-j Momentary SPDT HA1B-A1C5-j HA1B-A1C1V-j DPDT HA1B-M3C6-j HA1B-M3C2V-j Maintained DPDT HA1B-A1C6-j HA1B-A1C2V-j SPDT HA1B-A3C5-j HA1B-A3C1V-j Maintained DPDT HA1B-A3C6-j HA1B-A3C2V-j 1. In place of j specify Button Color Code from table. 2. Illuminated (translucent) style lenses also available, specify as such: instead of LA1B-M1C5-j use LA1B-M1C5L-k in place of k (specify Lens Color Code from next page.) 3. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6” respectively, ie LA1B-M1C1V-j becomes LA1B-M1C5V-j). jButton Color Codes Color Code Color Code Black B Blue S Green G White W Red R Yellow Y 472 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices Non-Illuminated Pushbuttons (Sub-Assembled) Contact + Safety Lever Lock + Operator + Button = Complete Part Operators Buttons/Lenses Contacts Style Momentary Maintained Style Button Lens Terminal Style Appearance Contacts Round Round Solder PCB Tab LA1L-MO LA1L-AO AB6M-BK2-j AL6M-LK2-k SPDT HA-C1 HA-C1V DPDT HA-C2 HA-C2V Square Square SPDT HA-C5 HA-C5V LA2L-MO LA2L-AO AB6Q-BK2-j AL6Q-LK2-k DPDT HA-C6 HA-C6V Rectangular Rectangular Safety Lever Lock Appearance Part Number LA3L-MO LA3L-AO AB6H-BK2-j AL6H-LK2-k HA9Z-LS Oversize Round Oversize Round Flush j Button Color Code HA1B-MO HA1B-AO Color Code HA1A-B1-j HA1A-L1-k* Black B Green G Oversize Square Red R Oversize Round Extended Blue S HA2B-MO HA2B-AO White W HA1A-B2-j – Yellow Y Mushroom k Lens Color Code Oversize Square Color Code HA1B-MOL HA1B-A0L Flush Amber A Green G HA2A-B1-jH A2A-L1-k** Red R 1. In place of j specify Button Color Code from table Blue S on right. 2. In place of k specify Lens Color Code from table Yellow Y Oversize Square on right. White W 3. *requires HA1L-M0 or HA1L-A0 operator instead Extended of HA1B-M0 or HA1B-A0. 4. **requires HA2L-M0 or HA2L-A0 instead of HA2A-B2-j – HA2B-M0 or HA2B-A0. Mushroom HA1A-B3-j HA1A-L3-k USA: 800-262-IDEC Canada: 888-317-IDEC 473 Silver Gold Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers ø16mm - L6 Series Switches & Pilot Devices HA1B/HA1E Stop Switch Key features: • PCB or Solder Terminals • Locking Lever Removable Contact Blocks • Positive Action Contacts • 1 or 2 form B (SPST-NC) Contacts • IP65 Protection • 16mm Mounting Hole • Tamper Proof Construction Direct CSA UL Recognized File No. DK95-00138 Opening File No. LR21451 File No. E55996 Action Specifications Nameplates Contact Form 1 or 2 form B (SPST-NC) HAAV–Yellow Plastic Termination PCB or Solder Terminal Contact Material Silver Applicable Standards EN60947-5-1, UL508, CSA 22.2. No. 14 Rated Insulation Voltage 250V AC/DC Degree of Protection IP65 Conditional Short-Circuit Current and 50 A (at 250V) 10A 250V Fuse, operation Short-Circuit Protective Device class M according to IEC269-1 and IEC269-2 Positive opening travel 3.4mm Marking Part Number Minimum force required to achieve positive Blank HAAV-0 10.3 N (2 form B contacts) Positive opening operation of all break contacts. Opening Maximum travel including travel beyond the Operation 5.5mm minimum travel position Maximum frequency of actuation 1,200 operations/hour Pollution Degree 3 Positive Action Stop Switch Accessories: Shroud Terminal Style Style Part Number Applicable Standards Style Operation Contact Solder Tab PCB HA1B- DPST(NC) (2 form B) HA1B-V2E2R SEMI S2 Compliant V2E2VR XA9Z-KG1 Stop Pushlock/ (Approved by TUV) Switch Turn Reset SPST-NC (1 form B) HA1E-V2S1R Short Body — DPST-NC (2 form B) HA1E-V2S2R 1. Button is non-removable, available in red and as complete assembled unit only. 2. Stop Switch does not come with safety lever lock. Buzzers (IP40) Buzzer Ratings Terminal Style Frequency 2 khz ± 500 HZ Style Operating Voltage Solder/ Amplitude 80db @ 0.1m (at rated voltage) PCB Tab Operating Voltage 6V AC/DC or 12 - 24V AC/DC ± 10% Adjustable Cycle 55 to 600 cycles per minute 6V AC/DC ± 10% LA3Z-1X2 LA3Z-1X2V DC: 7mA Current Draw AC: 20mA Life 1000 hrs. minimum 12V to 24 AC/DC ± 10% LA3Z-1X4 LA3Z-1X4V Insulation Voltage 60V AC/DC -20 to 55ºC (no freezing), 45 to 85% Operating Temperature RH Degree of Protection IP40 800-262-IDEC (4332) • USA & Canada 505 Buzzer-Rectangular ø43mm Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices Pilot Lights (Assembled) Pilot Lights kLens/LED Color Codes Terminal Style Color Code Style Solder Tab PCB Amber A Round Green G Red R Blue S LA1P-1C0l-k LA1P-1C0lV-k White W Yellow Y Square lVoltage/Lamp Code Voltage Code 5V DC LED 1 LA2P-1C0l-k LA2P-1C0lV-k 6V AC/DC LED 2 12V AC/DC LED 3 24V AC/DC LED 4 Rectangular 120V AC LED 8 6V AC/DC Incandescent 5 12V AC/DC Incandescent 6 LA3P-1C0l-k LA3P-1C0lV-k 24V AC/DC Incandescent 7 Oversize Round HA1P-1C0l-k HA1P-1C0lV-k Oversize Square HA2P-1C0l-k HA2P-1C0lV-k Oversize Round Unibody HA1P-1l-k — Oversize Square Unibody 1. In place of k specify Lens/LED Color Code from table. 2. In place of l specify Voltage Code from table. HA2P-1l-k — 3. Lamps also available in 5VDC, 6V AC/DC, 12V AC/DC or 120V AC, change “4” or “7” using Voltage/Lamp Codes (ie LA1P-1C03-k uses 12V AC/DC LED). 4. Light independent of switch position. USA: 800-262-IDEC Canada: 888-317-IDEC 475 ø16mm - L6 Series Switches & Pilot Devices Pilot Lights (Sub-Assembled) Terminals + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens = Completed Unit Operators Lenses Lamps Style Part Number Style Part Number Style Voltage Part Number Round Round LED 5V DC LFTD-5k 6V AC/DC LFTD-6k 12V AC/DC LFTD-1k AL6M-LK3-k LA1P-0 24V AC/DC LFTD-2k 120 V AC LFTD-H2k Incandescent Square Square 6V AC/DC LH-06 12V AC/DC LH-14 AL6Q-LK3-k 24V AC/DC LH-28 LA2P-0 In place of k specify LED color code from table below. Rectangular Rectangular AL6H-LK3-k Terminals Appearance Solder Tab PCB LA3P-0 Oversize Round HA-C00HA-C00V Oversize Round HA1A-P1-k HA1P-0 Not required for unibody operators. Oversize Square Lamp Holder Oversize Square HA2A-P1-k Appearance Part Number HA2P-0 HA9Z-AH In place of k specify lens color code. Oversize Round Unibody Safety Lever Lock Appearance Part Number HA1P-00 HA9Z-LS Oversize Square Unibody k Lens/LED Color Codes Color Code HA2P-00 Amber A Green G Red R Blue S Yellow Y White W 476 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices Illuminated Pushbuttons (Assembled) Illuminated Pushbuttons kLens Color Codes Operation Terminal Style Color Code Style Contact Solder Tab PCB Amber A Green G Round SPDT LA1L-M1C5l-k LA1L-M1C1lV-k Momentary Red R DPDT LA1L-M1C6l-k LA1L-M1C2lV-k Blue S Yellow Y SPDT LA1L-A1C5l-k LA1L-A1C1lV-k Maintained White W DPDT LA1L-A1C6l-k LA1L-A1C2lV-k Square lVoltage/Lamp Code SPDT LA2L-M1C5l-k LA2L-M1C1lV-k Momentary DPDT LA2L-M1C6l-k LA2L-M1C2lV-k Voltage Code 5V DC LED 1 6V AC/DC LED 2 SPDT LA2L-A1C5l-k LA2L-A1C1lV-k Maintained DPDT LA2L-A1C6l-k LA2L-A1C2lV-k 12V AC/DC LED 3 24V AC/DC LED 4 Rectangular 120 V AC LED 8 SPDT LA3L-M1C5l-k LA3L-M1C1lV-k Momentary 6V AC/DC Incandescent 5 DPDT LA3L-M1C6l-k LA3L-M1C2lV-k 12V AC/DC Incandescent 6 24V AC/DC Incandescent 7 SPDT LA3L-A1C5l-k LA3L-A1C1lV-k Maintained DPDT LA3L-A1C6l-k LA3L-A1C2lV-k Oversize Round SPDT HA1L-M1C5l-k HA1L-M1C1lV-k Momentary DPDT HA1L-M1C6l-k HA1L-M1C2lV-k SPDT HA1L-A1C5l-k HA1L-A1C1lV-k Maintained DPDT HA1L-A1C6l-k HA1L-A1C2lV-k Oversize Square SPDT HA2L-M1C5l-k HA2L-M1C1lV-k Momentary DPDT HA2L-M1C6l-k HA2L-M1C2lV-k SPDT HA2L-A1C5l-k HA2L-A1C1lV-k Maintained DPDT HA2L-A1C6l-k HA2L-A1C2lV-k Mushroom SPDT HA1L-M3C5l-k HA1L-M3C1lV-k Momentary DPDT HA1L-M3C6l-k HA1L-M3C2lV-k SPDT HA1L-A3C5l-k HA1L-A3C1lV-k Maintained DPDT HA1L-A3C6l-k HA1L-A3C2lV-k 1. In place of k specify Lens Color Code from table. 2. In place of l specify Voltage Code from table. 3. Lamps also available in 5V DC, 6V AC/DC, 12V AC/DC or 120V AC, change “4” or “7” using voltage/lamp codes (ie LA1P-1C03-k uses 12V AC/DC LED). 4. PCB terminal models also available with silver contacts change “1” or “2” to “5” or “6” respectively, (ie LA1L-M1C14V-j becomes LA1L-M1C54V-j). 5. Light independent of switch position. USA: 800-262-IDEC Canada: 888-317-IDEC 477 ø16mm - L6 Series Switches & Pilot Devices Illuminated Pushbuttons (Sub-Assembled) Terminals + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens = Completed Unit Operators Lenses Lamps Style Momentary Maintained Style Part Number Style Voltage Part Number Round LED Round 5V DC LFTD-5k 6V AC/DC LFTD-6k 12V AC/DC LFTD-1k LA1L-MO LA1L-AO AL6M-LK2-k 24V AC/DC LFTD-2k 120 V AC LFTD-H2k Incandescent Square 6V AC/DC LH-06 Square 12V AC/DC LH-14 24V AC/DC LH-28 LA2L-MO LA2L-AO AL6Q-LK2-k Contacts Terminal Style Rectangular Rectangular Appearance Contacts Solder PCB Tab LA3L-MO LA3L-AO AL6H-LK2-k SPDT HA-C10 HA-C10V DPDT HA-C20 HA-C20V Oversize Round Oversize Round SPDT HA-C50 HA-C50V DPDT HA-C60 HA-C60V HA1L-MO HA1L-A0 HA1A-L1-k Lamp Holder Appearance Part Number Oversize Square Oversize Square HA9Z-AH HA2L-MO HA2L-AO HA2A-L1-k Safety Lever Lock Mushroom Mushroom Appearance Part Number HA1B-MOL HA1B-AOL HA9Z-LS HA1A-L3-k k Lens/LED Color Codes In place of k specify lens color code. Color Code Amber A Green G Red R Blue S Yellow Y White W 478 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Silver Gold Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices Selector Switches (Assembled) Selector Switches Contact Operations (for all selectors) Terminal Style Style Position Contact Operator Position and Solder Tab PCB Contacts Contact Operation L R Maintained DPDT LA1S-2C6 LA1S-2C2V Left Right Contact Contact NO NC NO NC Left Spring return L R DPDT LA1S-21C6 LA1S-21C2V Round from right C C 2-pos. C (DPDT) L Left Right Maintained R DPDT LA1S-3C6 LA1S-3C2V Contact Contact NO NC NO NC Right Spring return L R DPDT LA1S-31C6 LA1S-31C2V from right C C C Spring return Left Right L R DPDT LA1S-32C6 LA1S-32C2V Contact Contact from left NO NC NO NC Left C 2-Way spring L R DPDT LA1S-33C6 LA1S-33C2V C C return Left Right L R Contact Contact Maintained DPDT LA2S-2C6 LA2S-2C2V NO NC NO NC 3-pos. Center (DPDT) Spring return L R DPDT LA2S-21C6 LA2S-21C2V C C Square from right C Left Right L Contact Contact R Maintained DPDT LA2S-3C6 LA2S-3C2V NO NC NO NC Right Spring return L R DPDT LA2S-31C6 LA2S-31C2V C C from right C As viewed from front of switch. Spring return L R DPDT LA2S-32C6 LA2S-32C2V from left C 2-Way spring L R DPDT LA2S-33C6 LA2S-33C2V return L R Maintained DPDT LA3S-2C6 LA3S-2C2V Spring return L R DPDT LA3S-21C6 LA3S-21C2V Rectangular from right C L Maintained R DPDT LA3S-3C6 LA3S-3C2V Spring return L R DPDT LA3S-31C6 LA3S-31C2V from right C Spring return L R DPDT LA3S-32C6 LA3S-32C2V from left C 2-Way spring L R DPDT LA3S-33C6 LA3S-33C2V return L R Maintained DPDT HA1S-2C6 HA1S-2C2V Spring return L R DPDT HA1S-21C6 HA1S-21C2V from right Oversize Round C L R Maintained DPDT HA1S-3C6 HA1S-3C2V Spring return L R DPDT HA1S-31C6 HA1S-31C2V 1. All assembled selector switches use DPDT from right contacts. C 2. For SPDT contacts see sub-components on Spring return L R DPDT HA1S-32C6 HA1S-32C2V next page. from left 3. PCB terminal models also available with C silver contacts change “1” or “2” to “5” or 2-Way spring L R DPDT HA1S-33C6 HA1S-33C2V “6” respectively, (ie LA1S-21C2V becomes return LA1S-21C6V). USA: 800-262-IDEC Canada: 888-317-IDEC 479 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position ø16mm - L6 Series Switches & Pilot Devices Selector Switches (Sub-Assembled) Contact + Safety Lever Lock + Operator = Complete Part Operators Contacts Style Position Function Part Number Terminal Style Appearance Contacts Round LA1S-2Y Solder Maintained PCB 2 Tab Spring from right LA1S-21Y Maintained LA1S-3Y SPDT HA-C1 HA-C1V Spring from right LA1S-31Y 3 DPDT HA-C2 HA-C2V Spring from left LA1S-32Y Spring from both LA1S-33Y Square Maintained LA2S-2Y 2 Spring from right LA2S-21Y SPDT HA-C5 HA-C5V DPDT HA-C6 HA-C6V Maintained LA2S-3Y Spring from right LA2S-31Y 3 Spring from left LA2S-32Y 1. All assembled switches listed on previous page Spring from both LA2S-33Y use DPDT contacts. 2. SPDT Contacts for use on 2 position selector Rectangular Maintained LA3S-2Y switch only 2 Spring from right LA3S-21Y Safety Lever Lock Maintained LA3S-3Y Appearance Part Number Spring from right LA3S-31Y 3 Spring from left LA3S-32Y Spring from both LA3S-33Y HA9Z-LS Oversize Round Maintained HA1S-2Y 2 Spring from right HA1S-21Y Maintained HA1S-3Y Spring from right HA1S-31Y 3 Spring from left HA1S-32Y Spring from both HA1S-33Y 480 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Silver Gold Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices Key Switches (Assembled) Key Switches Contact Operations (for all selectors) Terminal Style Style Position Contact Operator Position and Solder Tab PCB Contacts Contact Operation L R Maintained DPDT LA1K-2C6l LA1K-2C2Vl Left Right Contact Contact NO NC NO NC Left Spring return L R DPDT LA1K-21C6B LA1K-21C2VB Round from right C C 2-pos. C (DPDT) L Maintained R DPDT LA1K-3C6l LA1K-3C2Vl Left Right Contact Contact NO NC NO NC C Right Spring return L R DPDT LA1K-31C6l LA1K-31C2Vl from right C C C Spring return Left Right L R DPDT LA1K-32C6l LA1K-32C2Vl Contact Contact from left NO NC NO NC Left C 2-Way spring L R DPDT LA1K-33C6D LA1K-33C2VD C C return Left Right L R Contact Contact Maintained DPDT LA2K-2C6l LA2K-2C2Vl NO NC NO NC 3-pos. Center (DPDT) Spring return L Square R DPDT LA2K-21C6B LA2K-21C2VB C C from right C Left Right Contact Contact L R Maintained DPDT LA2K-3C6l LA2K-3C2Vl NO NC NO NC Right C Spring return L C C DPDT R LA2K-31C6l LA2K-31C2Vl from right C As viewed from front of switch. Spring return L R DPDT LA2K-32C6l LA2K-32C2Vl from left C 2-Way spring L R DPDT LA2K-33C6D LA2K-33C2VD return l Key Retention Option Codes Code Description L R Maintained DPDT LA3K-2C6l LA3K-2C2Vl Key not retained in any position A Rectangular (removable in all positions) Spring return L R DPDT LA3K-21C6B LA3K-21C2VB from right B Key retained in right position only C C Key retained in left position only L Maintained R DPDT LA3K-3C6l LA3K-3C2Vl Key retained in left and right D C (3 position only) Spring return L R DPDT LA3K-31C6l LA3K-31C2Vl from right Key retained in center only E (3 position only) C Spring return L R DPDT LA3K-32C6l LA3K-32C2Vl from left Key retained right and center G (3 position only) C 2-Way spring L R DPDT LA3K-33C6D LA3K-33C2VD Key retained left and center return H (3 position only) L R Maintained DPDT HA1K-2C6l HA1K-2C2Vl Key cannot be removed from a spring-return position. Spring return L R Oversize Round DPDT HA1K-21C6B HA1K-21C2VB from right C L R Maintained DPDT HA1K-3C6l HA1K-3C2Vl C Spring return L R DPDT HA1K-31C6l HA1K-31C2Vl from right 1. In place of l specify Key Retention Code from next page. C Spring return L 2. All assembled key switches have DPDT R DPDT HA1K-32C6l HA1K-32C2Vl from left contacts. For SPDT see sub-assembled on next page. C 2-Way spring L 3. PCB terminal models also available with R DPDT HA1K-33C6D HA1K-33C2VD return silver contacts change “1” or “2” to “5” or “6” respectively, (ie LA1K-2C2Vl becomes LA1K-2C6Vl). USA: 800-262-IDEC Canada: 888-317-IDEC 481 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position ø16mm - L6 Series Switches & Pilot Devices Selector Switches (Sub-Assembled) Contact + Safety Lever Lock + Operator = Complete Part Operators Contacts Style Position Function Part Number Terminal Style Appearance Contacts Round Maintained LA1K-2l Solder 2 PCB Tab Spring from right LA1K-21B SPDT HA-C1 HA-C1V DPDT HA-C2 HA-C2V Maintained LA1K-3l Spring from right LA1K-31l 3 Spring from left LA1K-32l Spring from both LA1K-33D SPDT HA-C5 HA-C5V DPDT HA-C6 HA-C6V Square Maintained LA2K-2l 2 Spring from right LA2K-21B 1. All assembled switches listed on previous page use DPDT contacts. 2. SPDT Contacts for use on 2 position selector switch only Maintained LA2K-3l Spring from right LA2K-31l Safety Lever Lock 3 Spring from left LA2K-32l Appearance Part Number Spring from both LA2K-33D HA9Z-LS Rectangular Maintained LA3K-2l 2 Spring from right LA3K-21B l Key Retention Option Codes Code Description Key not retained in any position Maintained LA3K-3l A (removable in all positions) Spring from right LA3K-31l 3 Spring from left LA3K-32l B Key retained in right position only Spring from both LA3K-33D C Key retained in left position only Key retained in left and right D (3 position only) Oversize Round Maintained HA1K-2l Key retained in center only 2 Spring from right E HA1K-21B (3 position only) Key retained right and center G (3 position only) Key retained left and center H Maintained HA1K-3l (3 position only) Spring from right HA1K-31l 3 Spring from left HA1K-32l Key cannot be removed from a Spring from both HA1K-33D spring-return position. 1. In place of l specify key removable code from table on right. 2. Operator includes two keys. 482 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Silver Gold Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices Illuminated Selector Switches (Assembled) Illuminated Selector Switches Contact Operations (for all selectors) Terminal Style Style Position Contact Operator Position and Solder Tab PCB Contacts Contact Operation L R Maintained DPDT LA1F-2C6l-k LA1F-2C2lV-k Left Right Contact Contact NO NC NO NC Left Spring return L R DPDT LA1F-21C6l-k LA1F-21C2lV-k Round from right C C 2-pos. C (DPDT) L Left Right R Maintained DPDT LA1F-3C6l-k LA1F-3C2lV-k Contact Contact NO NC NO NC Right C Spring return L DPDT LA1F-31C6l-k LA1F-31C2lV-k R C C from right C Left Right Spring return L Contact Contact R DPDT LA1F-32C6l-k LA1F-32C2lV-k NO NC NO NC from left Left C 2-Way L R DPDT LA1F-33C6l-k LA1F-33C2lV-k C C spring return Left Right Contact Contact L R Maintained DPDT LA2F-2C6l-k LA2F-2C2lV-k NO NC NO NC 3-pos. Center (DPDT) Spring return L C C R DPDT LA2F-21C6l-k LA2F-21C2lV-k Square from right Left Right C Contact Contact L NO NC NO NC Maintained R DPDT LA2F-3C6l-k LA2F-3C2lV-k Right C Spring return C C L DPDT LA2F-31C6l-k LA2F-31C2lV-k R from right As viewed from front of switch. C Spring return L R DPDT LA2F-32C6l-k LA2F-32C2lV-k from left C 2-Way L R DPDT LA2F-33C6l-k LA2F-33C2lV-k k Lens/LED Color Codes spring return Color Code Color Code L R Maintained DPDT LA3F-2C6l-k LA3F-2C2lV-k Amber A Blue S Green G Yellow Y Spring return L R DPDT LA3F-21C6l-k LA3F-21C2lV-k Rectangular from right Red R White W C L R Maintained DPDT LA3F-3C6l-k LA3F-3C2lV-k l Voltage/Lamp Code C Voltage Code Spring return L DPDT LA3F-31C6l-k LA3F-31C2lV-k R from right 5V DC LED 1 C Spring return L 6V AC/DC LED 2 R DPDT LA3F-32C6l-k LA3F-32C2lV-k from left 12V AC/DC LED 3 C 2-Way L R 24V AC/DC LED 4 DPDT LA3F-33C6l-k LA3F-33C2lV-k spring return 120V AC LED 8 L R Maintained DPDT HA1F-2C6l-k HA1F-2C2lV-k 6V AC/DC Incandescent 5 12V AC/DC Incandescent 6 Spring return L R DPDT HA1F-21C6l-k HA1F-21C2lV-k Oversize Round from right 24V AC/DC Incandescent 7 C L Maintained R DPDT 1. In place of k specify Lens/LED Color Code HA1F-3C6l-k HA1F-3C2lV-k from table above. 2. In place of l specify Voltage Code from C Spring return L DPDT HA1F-31C6l-k HA1F-31C2lV-k table above. R from right 3. Lamps also available in 5V DC, 6V AC/DC, 12 C V AC/DC or 120V AC, change “4” or “7” using Spring return L R DPDT HA1F-32C6l-k HA1F-32C2lV-k voltage/lamp codes (ie LA1F-2C63-k uses from left 12V AC/DC LED). C 4. All switches listed have DPDT contacts. For 2-Way L R DPDT HA1F-33C6l-k HA1F-33C2lV-k SPDT see sub-assembled on next page. spring return 5. PCB terminal models also available with silver contacts change “1” or “2” to “5” or “6” respectively, (ie LA1F-2C24V-k becomes LA1F-2C64V-k). 6. Light independent of switch position. USA: 800-262-IDEC Canada: 888-317-IDEC 483 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position 45˚ 3-Position 90˚ 2 -Position ø16mm - L6 Series Switches & Pilot Devices Illuminated Selector Switches (Sub-Assembled) Contacts + Safety Lever Lock + Lamp Holder + Lamp + Operator + Lens/Handle = Completed Unit Operators Safety Lever Lock Style Position Function Part Number Appearance Part Number Maintained LA1F-20 2 Spring from right LA1F-210 HA9Z-LS Maintained LA1F-30 Round Spring from right LA1F-310 3 Spring from left LA1F-320 Lamp Holder Spring from both LA1F-330 Appearance Part Number Maintained LA2F-20 2 Spring from right LA2F-210 Maintained LA2F-30 HA9Z-AH Square Spring from right LA2F-310 3 Spring from left LA2F-320 Spring from both LA2F-330 Lamps Maintained LA3F-20 2 Spring from right LA3F-210 Style Voltage Part Number Maintained LA3F-30 LED Rectangular 5V DC LFTD-5k Spring from right LA3F-310 3 6V AC/DC LFTD-6k Spring from left LA3F-320 12V AC/DC LFTD-1k Spring from both LA3F-330 24V AC/DC LFTD-2k Maintained HA1F-20 120V AC LFTD-H2k 2 Spring from right HA1F-210 Incandescent Oversize Maintained HA1F-30 Round 6V AC/DC LH-06 Spring from right HA1F-310 3 12V AC/DC LH-14 Spring from left HA1F-320 24V AC/DC LH-28 Spring from both HA1F-330 In place of k specify LED color code from table below. Contacts Terminal Style Con- k Lens/LED Color Codes Appearance Solder tacts PCB Color Code Lenses/Handles Tab Amber A Appearance Part Number SPDT HA-C10 HA-C10V Green G Standard DPDT HA-C20 HA-C20V Red R Blue S LA1A-F-k Yellow Y SPDT HA-C50 HA-C50V DPDT HA-C60 HA-C60V White W Oversize All assembled selectors on previous pages use DPDT contacts. SPDT contacts are for use only on two posi- HA1A-F-k tion selectors. In place of k specify lens color code from table. 484 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Silver Gold Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices Pushbutton Selectors (Assembled) Pushbutton Selectors j Button Color Codes Terminal Style Color Code Color Code Style Solder Tab PCB Amber A Blue S 2 Position HA1R-2C6-j HA1R-2C2V-j Green G Yellow Y Red R White W 3 Position HA1R-3C6-j HA1R-3C2V-j 1. In place of j specify Button Color Code. 2. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6” Contact Operation respectively, ie HA1R-2C2V-j becomes HA1R-2C6V-j). 3. Pushed position, momentary only. Operator Position and Contact Information Contacts Down Center Up Left Right Contact Operation Left Right Contact Contact Contact Contact NO NC NO NC NO NC NO NC 2-pos. Maintained Operator Position Style (DPDT) Spring from Top Left Center Right C C C C Left Right Left Right Normal Pushed Normal Pushed Normal Pushed Contact Contact Contact Contact NO NC NO NC NO NC NO NC Left Right Left Right Left Right Left Right 2-pos. Spring Return Contact Contact Contact Contact Contact Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC (DPDT) from Bottom 2 Position —— C C C C Left Right Left Right Left Right C C C C C C C C Contact Contact Contact Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC Left Right Left Right Left Right Left Right 3-pos. Left Right Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact All models NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC (DPDT) 3 Position Blocked C C C C C C C C C C C C C C C C As viewed from front of switch. Lever Switches Terminal Type Style Operation Contacts Solder Tab PCB U Maintained DPDT LA1T-2C6 LA1T-2C2V D U Spring return from top DPDT LA1T-21C6 LA1T-21C2V D U Spring return from bottom DPDT LA1T-22C6 LA1T-22C2V D U C Maintained DPDT LA1T-3C6 LA1T-3C2V D U C Spring return from top DPDT LA1T-31C6 LA1T-31C2V D U C Spring return from bottom DPDT LA1T-32C6 LA1T-32C2V D U C Spring return from both DPDT LA1T-33C6 LA1T-33C2V D 1. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6” respectively, ie LA1T-2C2V becomes LA1T-2C6V). 2. Terminology: U = up, D = down, C = center. USA: 800-262-IDEC Canada: 888-317-IDEC 485 3-Position 2 -Position ø16mm - L6 Series Switches & Pilot Devices Switch Engraving Order Form – L6 Series Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved. To insure engraving accuracy, fax it to your IDEC representative or Distributor. Your Company: Telephone: Name: Fax: Address: Email: PO: Part Number to be Engraved: Please check one of the boxes below to indicate your choice of engraving options: Rectangular Square Round Switch Switch Switch Letter Max. Characters Letter Max. Characters # of Letter Max. Characters # of Lines # of Lines Height Per Line Height Per Line Lines Height Per Line 1 5/32 6 1 5/32 5 5/32 3 1 5/32 6 5/32 5 1/8 3 2 2 1/8 6 1/8 6 2 Custom* 3 1/8 6 3 1/8 6 3 Custom* 4 N/A 4 N/A 4 N/A *Engraving is possible, but character size will be smaller than standard sizes. 1. Above mentioned specifi cations hold true for standard size pushbuttons (round, square and rectangular). 2. Oversize pushbuttons and pilot lights allow you to engrave 1 additional character. 3. Engraving is done on the button itself for non-iIlluminated push buttons and on marking plate for illuminated pushbuttons and pilot lights. 4. Please enter text exactly how you want it engraved, take care to emphasize capital or small letters. Enter text to be engraved: Sample Letter Sizes 1/8 Letters: Line 1: 5/32 Letters: Line 2: Line 3: Line 4: For IDEC Internal Use Only: Work Order #: 486 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices Accessories Part Specifi cations Part Number Notes Used for tightening the plastic locking ring when install- ing the L6 series unit on a panel. Ring Wrench Made of metal MT-001 Tightening torque should not exceed 9kgf cm when tightening the locking ring. Lamp Holder Tool Made of rubber. Used for removing and replacing Rubber tool used for replacing LED and incandescent OR-44 (Made of Rubber) LED and incandescent lamps in illuminated units. lamps. Lens Removal Tool For Illuminated pushbuttons and pilot lights. MT-101 Used for removing the lens or button from the housing. 5V DC LFTD-5k 6V AC/DC LFTD-6k T 1-3/4 miniature fl ange base. In place of j specify LED LED Lamp 12V AC/DC LFTD-1k Color Code (A, G, R, S, W, Y). 24V AC/DC LFTD-2k 120V AC LFTD-H2k 6V AC/DC LH-06 Incandescent Lamp 12V AC/DC LH-14 0.5W, T 1-3/4 miniature fl ange base 24V AC/DC LH-28 Round/Square AL-K6 90 degrees Prevents inadvertent switch operation. IP40 dust-tight opening maintained rated. Rectangular AL-KH6 Switch Guard Round/Square AL-K6SP 180 degrees Prevents inadvertent switch operation. IP65 oiltight opening, Rectangular AL-KH6SP rated. spring return Oversize Round/Sq HA9Z-K1 For round units AL-D6 Provides extra level of sealing for “front-panel” portion Dust-proof Cover For square units AL-DQ6 of switches. (Not applicable for units with oversize lenses or buttons). For rectangular units AL-DH6 All removable contacts H6-VL2 Covers terminals to prevent possible electric shock. Terminal Cover Made of white nylon Unibody Pilot Lights H6-PVL Fills unused panel cutouts. Made of nitrile rubber. Push- Rubber AL-B6 in installation from front of panel. IP65 (oiltight) rated. Mounting Hole Plug Fills unused panel cutouts. Made of aluminum. Screw- Aluminum AL-BM6 on locking ring from inside of panel. IP65 (oiltight) rated. for LA1K, LA2K, LA3K (#132) AS6-SK Replacement Keys Pair of keys. for HA1K (#231) – oversize KG9Z-SK Round AL6M-W Square AL6Q-W Replacement Rectangle AL6H-W Engraving Inserts Oversize Round HA9Z-P1-W Oversize Square HA9Z-P2-W Mushroom HA9Z-P13-W Replacement All models HA9Z-LN Locking Ring L6 standard AL6-LP Replacement Prevents rotation of switches in panel. (included with all Anti-Rotation Ring assembled switches) L6 oversize HA9Z-LP Replacement Applicable to round oversize selectors only HA9Z-HC1-j Selector Inserts j = (G, R, S, W, Y) Replacement HA9Z-LS Safety Lever Lock USA: 800-262-IDEC Canada: 888-317-IDEC 487 LOCK TOP RO.61" (15.5mm) LOCK LOCK LOCK ø16mm - L6 Series Switches & Pilot Devices Appearance Description Used With Part Number Pushbuttons, pilot lights, illuminated ø24mm round, metal (aluminum color), panel cut-out ø20.2mm LA9Z-SM61 pushbutton, selector switches, key selector switches and illuminated selector switches. ø24mm round, plastic (black), panel cut-out ø20.2mm LA9Z-S61B L6 Switch Flush Bezel + 024mm square, plastic (black), panel cut-out 020.2mm LA9Z-S71B Flush Bezel 24 x 30mm rectangular, plastic (black), panel cut-out ø20.2 x LA9Z-S81B = 26.2mm Switch Guard w/ Flush Bezel Rectangular, plastic (black) LA9Z-KS8 Flush Switch (spring return) Flush bezels not applicable for oversize units. Dimensions (mm) Pilot Lights (LA*P,) Pushbuttons (LA*B) Illuminated Pushbuttons (LA*L) Panel Thickness 0.5 to 6 Gasket 5.7 Locking Ring Note: 1. Pushbuttons do not have lamp terminals. 2. Pilot lights have only lamp terminals. Anti-rotation Ring 0.6 Tab Terminal Width 2.8×0.5t Round Square Rectangular R15.5 PC Board Terminal Width 0.8×0.5t 1 2.6 2 24 10.5 13.5 18 17.8 5.5 936 9 PC Board Terminal Solder/Tab Terminal Lever Switches (LA1T) Buzzer (LA3Z) PC Board Terminal Tab Terminal Panel Thickness 0.8W×0.5t 2-R0.6 2.8W×0.5t 0.5 to 6 R15.5 X2 X1 10.8 24 1 2.6 2 10.5 13.5 24 17.8 5.5 936 9 Emergency Stop Switch (HA1B) Rubber Washer Panel Thickness Stopper 0.02"-0.24" (0.5~6.0mm) Locking Ring PCB Terminal 0.34" + (8.7mm)  NC NC - 0.21" 0.53" 0.20" (5.4mm) 0.41" (13.5mm) 0.43" ø0.70" (5.2mm) (10.5mm) (11mm) (17.8mm) 0.62" ø0.83" (15.8mm) (21mm) 0.98" (25mm) 1.42" (36mm) 488 www.idec.com ø18 ø ø18 Ø 0.98"  (24.9mm) Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights ø21 7.85 15.8 X2 X2 X1 C NO NC C NO NC 6.8 1.45 5 5 1 ø21 6 6 6.8 6.4 15.8 1.2 1 1.45 6 2.7 6 1.2 18 Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks LOCK TP O LOCK ø16mm - L6 Series Switches & Pilot Devices Emergency Stop Switch (HA1E) - Short Body Style Selector Switches (LA*S,) Illuminated Selector Switches (LA*F,) Key Selector Switches (LA*K) Panel Thickness 0.5 to 6 Gasket Locking Ring Anti-rotation Ring 0.6 Round Square Rectangular Tab Terminal Width 2.8×0.5t PC Board Terminal R15.5 Width 0.8×0.5t 2.6 1 10.5 13.5 9 24 2 18 17.8 5.5 936 17 PC Board Terminal Solder/Tab Terminal Round Square Rectangular 9 18 24 26 PC Board Drilling Layout (Bottom View) Illuminated Pushbuttons, Pilot Lights, Selector Switches, Panel Cut-Out Illuminated Selector Switches Key Selector Switches Pushbutton Lever Switches +0.2 6.4 6.8 7.85 6.8 ø16.2 0 1.45 1.45 24 HA1B E-Stop PCB Mounting Pattern 0.21" 0.21" (5.3mm) (5.3mm) 0.34" 0.21" (8.7mm) (5.4mm) USA: 800-262-IDEC Canada: 888-317-IDEC 489 ø1.2 Hole ø1.2 Hole Ø 0.05" (1.2mm) ø1.2 Hole ø18 ø18 24 ø21 15.8 X2 X2 X1 C NO NC C NO NC 5 5 1 6 6 6.8 6.4 1.2 1 1.45 1 5 5 1 5 5 18 18 1 5 5 ø16mm - L6 Series Switches & Pilot Devices Oversize Flush Pushbutton and Pilot Lights 1.02 [25.9] 0.43 [11.0] 0.94 [24.0] Oversize Extended Non-Illuminated Pushbutton 0.59 [15.1] Oversize Unibody Pilot Lights 1.48 [37.5] Mushroom Pushbuttons 1.18 [30.0] 0.79 [20.0] Oversize Selector Switch 0.94 [23.8 0.77 [19.5] 490 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights X2 X2 X1 C NO NC C NO NC C NO NC C NO NC C NO NC C NO NC C NO NC C NO NC Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices Oversize Key Switch 1.54 [39.0] Lever Switch 0.94 [23.8] Flush Bezel Flush Bezel with Switch Panel Thickness 0.5 to 5 Mounting Flush Bracket Bezel Gasket Plastic Metal Round 9 43 0.9 0.8 9.8 8.5 2 Square Selector Switches Illuminated & 8.5 2 Non-illuminated Key Lever Rectangular 2 2 2 24 10 18.1 17 30 9.3 2 Flush Bezel Mounting Hole Layout Round Square Rectangular +0.2 +0.2 26.2 20.2 – 0.1 – 0.1 30 min.∗ 24 min.∗ 24 min.∗ USA: 800-262-IDEC Canada: 888-317-IDEC 491 ø18 ø18 +0.2 ø20.2 – 0.1 ø24 ø24 24 min.∗ C NO NC C NO NC 22.6 23 C NO NC NO NC 27.4 21.4 21.4 ø21.4 24 min.∗ 26 20 20 ø 20 24 24 18 18 14.8 +0.2 20.2 -0.1 24 min.∗ R22 ø16mm - L6 Series Switches & Pilot Devices Terminal Confi gurations AL-K6SP Non Illuminated Pushbutton Pilot Lights Illuminated Pushbuttons Buzzer TOP TOP TOP Input Lamp Terminal Lamp Terminal Terminal (+) (+) (X1) Input Buzzer Terminal Sound Lamp Terminal Lamp Terminal (X2) Switch Steady Slow Quick (−) (−) AL-KH6SP 24 18 34 Panel Thickness 0.5 to 5 14 25 minimum 19 minimum AL-D6 AL-DQ6 AL-DH6 H6-VL2 AL-B6 ø24 24 47 26 30 TOP 4 15 21 Waterproof gasket Waterproof gasket for dust cover Waterproof gasket for dust cover for dust cover AL-BM6 LFTD LED Lamp 2.5 12 Internal Circuit Gasket Locking Ring Panel Thickness 0.5 to 6 LED Chip Protective Diode Zener Diode AL-B6 26 492 www.idec.com Circuit Breakers Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights ø18 0.3 13 ø16.5 7.5 23.5 ø17.8 10.5 13 CN NOC CN NOC 0.3 13 45.5 minimum 7.5 33 X2 X2 X1 0.3 13 7.5 24 X2 X2 X1 CN NOC 23.5 CN NOC 10.5 13 17.6 ø18 X2 X2 ø16.5 45.5 minimum X1 X1 Circuit Breakers Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks ø16mm - L6 Series Switches & Pilot Devices General Instructions Pushbutton Assembly Lamp Installation Lamps can be replaced in two ways: 1. If contacts are accessible (or pushbutton not installed in a panel) then it is easiest to fi rst remove the contacts from the operator. This will allow easy access to the lamp/lamp-holder assembly. Grab lamp, depress slightly, and turn counter clockwise. Lamp can then be removed by pushing it back through the lamp holder. 2. If contacts are not accessible, then the lamp can be replaced by fi rst removing the lens from the operator. Just pull lens straight out either with a fi ngernail or optional lens removal tool (MT-101). Lamp/lamp-holder assembly can then be removed with lamp removal tool (OR-44). Insert lamp removal tool through operator, depress slightly, turn counter clockwise, then pull lamp/lamp-holder assembly out. Lamp can then be removed by pushing it back through the lamp holder. Engraving Lenses All buttons and lenses can be engraved directly on the outside surface. Illumi- nated lenses also allow for engraving on a plate that is underneath the colored Fitting Grooves section of the lens. Remove the colored section of the lens by pulling on the Grooves edge while simultaneously unhooking it from the latches on the lens holder. The marking plate will then be accessible. It can then be engraved or a thin marked insert (such as mylar or paper) can be sandwiched between the marking plate Engraving and colored section of the lens. Surface Color Lens Marking Plate Lens Holder Panel Mounting Before any unit can be mounted into a panel, the contact block must be removed. Slide metal locking lever and pull contact off. Loosen and remove the locking ring and square anti-rotation ring from the operator and insert operator through panel cutout from the front of the panel. Slide on anti-rotation ring and tighten locking ring, using locking ring wrench (MT-001). Slide contact block onto operator, observing TOP marking on both parts. Slide metal locking lever in direction indicated by LOCK. The yellow plastic safety lever lock can then be snapped onto the locking lever; this will prevent vibration or maintenance actions from releasing the contact from the operator. PCB Mounting Being able to separate the contacts from the operator allows for assembly of the front panel components (operator and lens) to be performed in tandem with the PC board assembly and soldering. For applications where multiple rows of push- buttons are mounted closely together, or where other components may obstruct access to the contact locking lever, be sure to include access holes in the PC board (refer to PC board layout dimensions for location). Also be sure to allow for space above and to the side of contact to ensure that no components block the contact block locking lever. PC board pins are designed to rest on the PCB, take this into consideration to ensure that pins do not short closely spaced traces. USA: 800-262-IDEC Canada: 888-317-IDEC 493