SLC30-IPS Signaling Lights SLC30-IPS Series — Panel Mounted Annunciators SLC Series Panel Mounted Annunciators — an Ideal Alternative to Mounting Multiple Pilot Devices SLC30-IPS combination display lights with control units combine display lights with control units such as pushbuttons, illuminated pushbuttons, selector switches and keylock selector switches. This results in savings of both space and installation time, since mounting separate switches becomes unnecessary. SLC30-IPS combination display lights can be custom built to meet your specifications. Key features of the SLC30-IPS series include: • Switches are integrated into an assembled SLC matrix, requiring only one panel cutout • Illuminated, non-illuminated, selector, and key-switches are available • Five window sizes based on a 30mm grid • Non-reflective clear lenses • Incandescent or Superbright LED illumination • Momentary pushbuttons only Momentary Illuminated Pushbuttons Square or Round with Square Bezel Momentary Non-Illuminat- ed Pushbuttons Square or Round with Square Bezel Selector Switches 2-Position or 3-Position UL Recogized CSA Certified File No. E68961 File No. R LR48366 Cert No. B970213332375 www.IDEC.com 730 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers SLC30-IPS Signaling Lights Specifications Light Source LED Incandescent Full Voltage 6, 12, 24V AC/DC 6, 12, 18, 24, 30V AC/DC Nominal Transformer 120, 240V AC 120, 240V AC Voltages DC-DC Conv. 110V DC 110V DC Maximum Voltage 250V AC/DC Contact Thermal Current 3A (gold contact), 5A (silver contact) Gold contact: 125V AC/0.1A, 30V DC/0.1A (resistive load) Contact Operating Current Silver contact: 125V AC/3A, 250V AC/2.0A (resisitive load), 30V DC/2A, 125V DC/0.4A (resistive load) Pushbuttons: Square or round, illuminated or non-illuminated (momentary only) Control Unit Types Selector switches: 2-position or 3-position, maintained Keylock switches: 2-position or 3-position, maintained Amber, Green, Red, Yellow, Blue (24V only), White, Colors Amber, Green, Red, Yellow, Blue, White dual color Red/Green (24V only) Lamp Type Surface (Chip type) LED cluster BA9S/13 (T3-1/4) bayonet base (1W) “F" “H" “L" “V" “G" Available Window Sizes 30x30mm 30x60mm 30x90mm 60x30mm 60x60mm Insulation Resistance More than 100 MΩ by a 500V DC megger Degree of Protection IP20 (for indoor use only), Type 1 Dielectric Strength 2,000V AC direct (2,500V AC transformer, 1 minute) Operating Temperature – 20˚ to +40˚C; 15–90% relative humidity (– 10˚ to +40˚C DC-DC converter) Material of Marking Plate and Polycarbonate Color Screen M3.5 screw with captive sems plate Termination (Check terminals: M3 screw with captive sems plate on applicable units) Full voltage: 10 rows, 20 columns (200 windows) Maximum Size Transformer and DC/DC converter: 50 windows 2 Recommended Wire Size 22-14 AWG x2 (2mm x 2) Cert. No. CSA Certified B970213332375 R File No. Approvals UL Recognized LR48366 File No. E68961 800-262-IDEC (4332) • USA & Canada 731 SLC30-IPS Signaling Lights Part Numbers (assembled) Part Number Guide 01 03 DD 2 SLC30N– – MLB Number of Number of Type Voltage Rows Columns Description Code Remark 10 row maximum Number of Rows 01, 02, 03, 04, 05, 06, 07, 08, 09, 10 (number of base unit (F-style) windows) 01, 02, 03, 04, 05, 06, 07, 08, 09, 10 20 column maximum  Number of Columns 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 (number of base unit (F-style) windows) Standard DD 6V, 12V, 24V Full voltage With check terminal DHM 24V only LED 2 color (Red/Green) DW 24V only  Type Transformer TD 120V, 240V AC DC-DC converter CD 110V DC only Full voltage DS 6V, 12V, 18V, 24V, 30V Incandescent Transformer TS 120V, 240V 6V AC/DC 6 Type DD or DS 12V AC/DC 1 With Type DD, DHM or DS 18V AC/DC 8 Type DS only 24V AC/DC 2 Type DD, DHM, DW, or DS  Voltage 30V AC/DC 3 Type DS only 120V AC 12 Type TD or TS 240V AC 24 Type TD or TS 110V DC 1 With Type CD No lamp 99 Type DS only 1. Secondary voltage on transformers and DC-DC converters is 24V. 2. To specify arrangement of varying window sizes and colors, use the order form on the next page. 3. Drawing required. SLC30-IPS Order Form Instructions How to order a SLC30-IPS display light: Color Codes Color Code Example 1: Specifying a window color Amber A Enter the lens illumination color code in each square. Use the table below for color codes. Green G Red R Blue S R White W This example would place a Yellow Y Red window in this location Control Unit Codes Contact Type Example 2: Specifying a control unit Type Gold Silver Enter the lens illumination color code in each square. Use the table below for color codes. Square illuminated pushbutton (DPDT) 1 2 Round illuminated pushbutton (DPDT) 3 4 R Square pushbutton (DPDT) 5 6 This example would place Round pushbutton (DPDT) 7 8 2 a Red, square, illuminated Selector switch (2-position) 9 10 pushbutton with silver contacts Selector switch (3-position) 11 12 in this location Keylock selector switch (2-position) 13 14 Keylock selector switch (3-position) 15 16 For assistance with developing part numbers or completing the order form on the next page, contact IDEC technical support. www.IDEC.com 732 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers SLC30-IPS Signaling Lights Order Form 800-262-IDEC (4332) • USA & Canada 733 Purchase Order No. ________________ Date ______________ Sheet of Fill in Part Number Below: Contact _________________________________ Number of Number of Type Lamp Company _________________________________ Rows Columns Code Voltage SLC30N — — MLB Phone # _________________________________ Black Frame Ship to _________________________________ Note: Convert all window styles to the style F (basic unit size). _________________________________ Remarks: City/State/Zip _________________________________ First Window Basic Unit Size (upper, left-hand (style F) THIS SIDE UP COLUMNS corner of panel) ROWS Quantity _________ Note: All units ordered with one order form must be identical For engraving information, see page 715. For information on how to complete the order form or to view examples, see the following page. . For SLC30-IPS ordering form instruction, see previous page. 2 See engraving information page 715. 3. See panel cutout dimensions on page 705. THIS SIDE UP 4. Additional ordering information is on page 702 and 704. SLC30-IPS Signaling Lights How to complete SLC30N-IPS Series annunciator order form: 1. Determine the type of switches you would like to include in the annunciator panel. For this example, we will include the following 3 types of switches: i. Red Square illuminated pushbutton DPDT with silver contacts. ii. Yellow round non-illuminated push button DPDT with silver contacts. iii. 2 Position keylock selector switch with silver contacts. 2. From chart shown on page 732, CODE DESCRIPTION R/2 Red Square Illuminated Push Button DPDT with Silver Contacts. Y/8 Yellow Round Non-illuminated Push Button DPDT with Silver contacts 14 2 Position Keylock Selector Switch with Silver contacts. Enter the above mentioned CODE designation in the layout window (on the previous page), where you would like the respective switch to be installed. 3. Determine the type of 30x30mm illuminated windows you would like to include. For the current example, we will assume 3 F-Style (30x30mm) windows in Yellow, Green and White color. Specify each window color in the Order Form with appropriate designation: “Y” for Yellow, “G” for Green and “W” for White. 4. Define the boundaries of each window (F, V, H, L or G Style) and of complete annunciator panel by heavy border lines, as shown below. 5. Count the number of rows and columns in the SLC30N diagram. eg: For the current example, we have, Rows: 02 and Columns: 03. SLC30N-0203 6. Determine the type of illumination for SLC30N annunciator. eg: For the current example, we use, “DD” for LED Full Voltage type illumination. SLC30N-0203-DD 7. Determine the voltage code; for the current example, we will use 24V AC/DC for all illuminated windows and illuminated switches. This is designated by using the number “2”. SLC30N-0203-DD2 8. The complete part number would be: SLC30N-0203-DD2MLB 9. A drawing must be provided for each of these parts ordered. Note: Buttons and switches are only available in 'F' (30 x 30mm) window sizes. www.IDEC.com 734 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers g SLC30-IPS Signaling Lights Dimensions Panel Cut-Out Dimensions No. of Columns 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Overall Panel Width g Dimension Cut- Cut- Overall out out Height Ht Wd i g 1.654" 1.378" 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 (42mm) (35mm) 2.853" 2.559" 2 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 (72mm) (65mm) 4.016" 3.740" 3 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 (102mm) (95mm) 5.197" 4.921" 4 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 (132mm) (125mm) 6.378" 6.102" 5 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 (162mm) (155mm) 7.559" 7.283" 6 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 (192mm) (185mm) 8.740" 8.465" 7 7 14 21 28 35 42 49 56 63 70 77 84 91 98 105 112 119 126 133 140 (222mm) (215mm) 9.921" 9.646" 8 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 128 136 144 152 160 (252mm) (245mm) 11.102" 10.827" 9 9 18 27 36 45 54 63 72 81 90 99 108 117 126 135 144 153 162 171 180 (282mm) (275mm) 12.283" 12.008" 10 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 (312mm) (305mm) Total Number of Windows (equivalent to style F—basic unit size) 800-262-IDEC (4332) • USA & Canada 735 No. of Rows 1.378" 1.654" (35mm) (42mm) 2.559" 2.853" (65mm) (72mm) 3.740" 4.016" (95mm) (102mm) 4.921" 5.197" (125mm) (132mm) 6.102" 6.378" (155mm) (162mm) 7.283" 7.559" (185mm) (192mm) 8.465" 8.740" (215mm) (222mm) 9.646" 9.921" (245mm) (252mm) 10.827" 11.102" (275mm) (282mm) 12.008" 12.283" (305mm) (312mm) 13.189" 13.465" (335mm) (342mm) 14.370" 14.646" (365mm) (372mm) 15.551" 15.827" (395mm) (402mm) 16.732" 17.008" (425mm) (432mm) 17.913" 18.189" (455mm) (462mm) 19.094" 19.370" (485mm) (492mm) 20.276" 20.551" (515mm) (522mm) 21.457" 21.732" (545mm) (552mm) 22.638" 22.913" (575mm) (582mm) 23.819" 24.094" (605mm) (612mm) SLC30-IPS Signaling Lights Dimensions, continued Contact Operations Selector Switches and Keylock Selector Switches Operator Position and Contact Operation (top view) Position Contacts Left Center Right 90° Left Right Left Right 2-position DPDT maintained — 2-position NO NC NO NC NO NC NO NC L R 45° Left Right Left Right Left Right 3-position DPDT maintained 3-position NO NC NO NC NO NC NO NC NO NC NO NC C L R www.IDEC.com 736 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights Contact Operation