Display Lights Display Lights Signalight Towers 56mm LT1 Series Light Towers Display Lights with a Tower of Advantages Base Mount Key features of the LT1 series SignaLight towers include: • Custom conŢgurations meet your speciŢcations — simply • Select your ţash preference, lens colors, number of tiers, mounting style, and voltage • Choice of LED or incandescent lamps LED lamps provide over 100,000 hours of service life and are Pole Mount C interchangeable with incandescent bulbs (with “L” bracket) Incandescent lamps (available up to 10 watts) are vibration- resistant and provide a 2,000 hour service life • Replace the bulbs independently; no need to disassemble the entire unit • Heat- and shock-resistant polycarbonate lenses • Flashing models allow each lamp to be ţashed or steady • Choice of metallic base or cost-saving plastic base • Color-coded wires make assembly and wiring easy • Mounting options include base and pole mount File No. E70646 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC C-7 Signalight Towers Display Lights LT1 SpeciŢcations LT1A: Incandescent, Non-Flashing LT1D: Incandescent, Flashing/Non-Flashing LT1H: LED, Non-Flashing LT1K: LED, Flashing/Non-Flashing Nominal Voltage 12V AC/DC ±10% 24V AC/DC ±10% 120V AC ±10% 240V AC ±10% Internal Fuse Rating 3.15A 3.15A 1A 1A C LED 12V AC/DC 24V AC/DC 120V AC N/A Lamp Rating Incandescent 12V, 5W 30V, 10W 120V, 7W 240V, 10W Red Green Yellow White Blue Current 12VDC 54mA 78mA 54mA 54mA 78mA LED N/A Required 24VDC 54mA 39mA 54mA 54mA 39mA per Lamp 120VAC 30mA 30mA 30mA 30mA 30mA Incandescent 0.4A ±10% 0.3A ±10% 0.06A ±10% 0.05A ±10% External Contact Capacity 5A 5A 2A 1A In-Rush LED Not applicable Current Incandescent Below 4.0A Below 3.0A Below 0.6A Below 0.5A per Lamp LED BA15D lamp base Lamp Style Incandescent T20 glass bulb, BA15D lamp base LED 100,000 hours (minimum) Lamp Life-Span Incandescent 2,000 hours (average) Lens Colors Red, Yellow, Green, Blue, White Lens Diameter 2.20" (56mm) Maximum Tiers 5 Degree of Protection IP20 (for indoor use only), NEMA1 LED: 45/minute ±10% (LT1K only) Flash Rate Incandescent: 80/minute ±10% (LT1D only) Insulation Resistance More than 3MΩ by a DC 500V megger Voltage Resistance 1,500V AC for 1 minute Operating Range –30 to +40°C (LT1A), –10 to +40°C (LT1D), 15 to 90% relative humidity Vibration Resistance 2.2G maximum Base mount (three stud) Pole mount (horizontal or vertical surface) Mounting NPT mount (via adaptor) to 1/2" or 3/4" NPT conduit Install in an upright position Optional Pole Height 10.75" (273mm) Approvals File No. E70646 Non-ţashing (steady): 20 AWG Wire Size Flashing: 18 AWG and 20 AWG C-8 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Display Lights Specifications Display Lights Display Lights Signalight Towers LT1 Part Numbers (assembled) Part Number Guide ➀➁➂➃➄➅➆➈➇ To determine the appropriate LT1 A–– 3 5 3 R Y G SignaLight part number, use these Light source Number Voltage Mounting Color code numbered boxes in conjunction and function of tiers style and with the codes in the Part Numbers: base des- Assembled Parts table below. ignation Part Numbers: Assembled Parts C Box No. Description Code Non-ţashing (steady), A incandescent lamp Flashing/non-ţashing, incan- D descent lamp Light source ➀ and function Non-ţashing (steady), H LED lamp Flashing/non-ţashing, K LED lamp ➁Number of tiers Maximum of 5 tiers 1 – 5 12V AC/DC 1 24V AC/DC 2 ➂Voltage 120V AC 5 240V AC (incandescent only) 8 Beige frame cover 1 Metallic frame cover 2 Mounting style and ➃ base designation Beige frame cover, pole incl. 3 Metallic frame cover, pole incl. 4 Red R Yellow Y ➃ – ➄➈Color code Green G Blue S White W Specify lens color code from the lowest to the highest tier. Examples: Assembled Parts Part No. Description Non-ţashing incandescent, 3 tiers, 120V AC, pole-mount, LT1A-354-RRR metallic base, all Red lenses Flashing/non-ţashing incandescent, 1 tier, 240V AC, base- LT1D-182-S mount, metallic base, Blue lens Flashing/non-ţashing incandescent, 2 tier, 24V AC/DC, LT1D-221-RS base-mount, plastic base, Red and Blue lenses Non-ţashing LED, 4 tier, 12V AC/DC, base-mount, metallic LT1H-412-RGYW base, Red, Green, Yellow, and White lenses Flashing/non-ţashing LED, 5 tier, 120V AC, pole-mount, LT1K-554-GSRGR metallic base, Green, Blue, Red, Green, and Red lenses www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC C-9 Signalight Towers Display Lights LT1 Part Numbers (sub-assembled) Frame = Complete Part Lenses Lamps Top Cap Part Numbers: Sub-Assemblies Description Part No. Notes Examples ① =Type C A = Incandescent, non-ţashing Frame D = Incandescent, ţashing/non-ţashing H = LED, non-ţashing LT1A-0142M = Steady light, four K = LED, ţashing/non-ţashing tiers, 24V AC/DC, metallic base ② = Number of tiers (1–5) LT1①-01②➂* ➂ = Lamp voltage LT1D-0125P = Flashing light, two 1 = 12V AC/DC tiers, 120V AC, plastic base 2 = 24V AC/DC 5 = 120V AC 8 = 240V AC * = Frame cover (M = metallic, P = beige) Lens * = Color: LT1X-08* LT1X-08G = Green lens R = Red, Y = Yellow, G = Green, S = Blue, W = White LED Lamps 12V AC/DC LTXD-1* LTXD-1R = Red LED, 12V AC/DC * = Color: 24V AC/DC LTXD-2* LTXD-2S = Blue LED, 24V AC/DC R = Red, Y = Yellow, G = Green, S = Blue, W = White 120V AC LTXD-120* LTXD-120Y = Yellow LED, 120VAC Incandescent 12V AC/DC B5-2 Lamps 30V AC/DC B5-31 120V AC B5-1 240V AC B5-4 Top cap LT1X-06 Mounting pole (optional) LT1Z-10 Bill of Materials Quantities Description Quantity Body frame Required: 1 per unit Lens(es) Variable: from 1 – 5 Top cap Required: 1 per unit Lamps Variable: from 1 – 5 Mounting pole Optional: 1 per unit C-10 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Display Lights Display Lights Display Lights Signalight Towers LT1 Accessories ➁Lens/LED Color Code Color Code Amber A Part Numbers: Accessories/Replacement Parts Green G Description Part No. Remarks Red R 12V AC/DC LED Lamp LTXD-1② See chart for available colors Blue S 24V AC/DC White W LTXD-2② See chart for available colors Yellow Y C 120V AC LTXD-120② See chart for available colors B5-2 12V AC/DC, 5W Incandescent Lamp B5-31 30V, 10W (for use with 24V AC/DC) B5-1 120V AC, 7W B5-4 240V AC, 10W Lens LT1X-08②See chart for available colors Top Cap LT1X-06 Clear polycarbonate Mounting Pole Chrome-plated steel supplied with “L” LT1Z-10 bracket and two M22 x 1.5 hexagonal nuts Pole Mounting Fixture Aluminum Ţxture for mounting pole- LT1Z-11 mounted units to horizontal surface; not included with assembled SignaLight units NPT Pole Adaptors 1/2" NPT pole adaptor; not included with LT1Z-NPT50 assembled SignaLight units 3/4" NPT pole adaptor; not included with LT1Z-NPT75 assembled SignaLight units In place of ② specify lens/LED color code from chart at right. www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC C-11 120° 3.2” (81mm) L1 2.75" (70mm) 120° Signalight Towers Display Lights LT1 Wiring 5 External Contact Connections Wiring is color-coded 4 to match the number of tiers. 1 tier = R 3 2 tier = RY 3 tier = RYB 4 tier = RYBS 2 5 tier = RYBSW Color Codes: 1 R = Red C Y = Yellow B = Brown S = Blue W = White AC/DC Common Cable = (White) LT1A/LT1H: Non-Flash Series LT1D/LT1K: Flash/Non-Flash Series SignaLight Dimensions Assembled Base Mount Assembled Pole Mount 2.20" (ş56mm) Mounting Hole Layout: Base Mounting Style 0.12" - 0.197" (3 - ş5mm) Cord Hole 1.57" 0.39" (ş10mm) (ş40mm) 0.787" 0.394" (20mm) Number of Number of (10mm) L1 L1 Tiers Tiers 1 1 6.7" (170mm) 6.7" (170mm) 2 2 9.4" (1240mm) 9.4" (1240mm) 3 3 12.2" (310mm) 12.2" (310mm) 0.875” 4 4 15.0" (380mm) 15.0" (380mm) 5 5 17.7" (450mm) 17.7" (450mm) 1.7” (44mm) C-12 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Display Lights 120° Display Lights 2.4" (60mm) Display Lights Signalight Towers LT1 Dimensions con’t Adapter LT1Z-NPT75 LT1Z-NPT50 1.00" (25mm) 1.17" (30mm) NPT50 NPT50 M22 x 1.5 threads M22 x 1.5 threads C 1.47" (37mm) 1.63" (41mm) 3/4" NPT threads 1/2" NPT threads Mounting Pole (LT1Z-10) Optional Pole Mounting Base: Side View (LT1Z-11) ø1.6" (47mm) 0.8" (20mm) 0.875" (22mm) 3.9" (100mm) Optional Pole Mounting Base: Bottom View Mounting Bracket (provided with mounting pole) 2–ø0.2" (5mm) 1.2" 1.4" 2.4" (30mm)(35mm) (60mm) ø2.9" (73mm) 2–ø11mm ø0.9" (22mm) 2–0.2" x 0.3" (4.5 x 8mm) 2–M0.2" x 0.4" (M4 x 10mm) www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC C-13 1.3" (32mm) Pole Length 11.8" (300mm) 1.7" (44mm) 0.5" (13mm) 3.2" (81mm) 10.8" (274mm)