ø22mm - LW Series Oiltight Switches & Pilot Devices LW Series — Switches and Pilot Devices: 22mm A3 LW Series offer ţexibility in space-saving package Key features include: LW Series switches and pilot lights can be mounted collectively on 1.0" centers. Combined with pcb terminals and locking lever removable contacts, this eases manufacture of pre-fab pushbutton arrays (as • PC board mount, solder or screw terminal pictured). PC Board tracing/soldering of contacts can be done in tandem • Collective mounting saves space with panel cutting/operator installation. • Non-reţective lens • Highly visible marking plate All LW series units mount by means of a locking ring that comes on from •Tamper proof construction the rear of the panel, as such they can not be removed from outside the panel and are relatively tamperproof. • Light touch reduces strain • Gold or silver contacts Combining the snap action and tactile feel of miniature commercial • Removable contacts simplify wiring pushbuttons with the size and ruggedness of industrial pushbuttons, and facilitate PCB applications LW pushbuttons are a unique solution to many applications. Choose from standard silver contacts or low-level gold plated contacts. Terminals available in .110" solder tab, M3 screw, or pcb pins. UL Recognized Registration CSA CertiŢed File # E55996 No. J9551801 File No. LR21451 A3-108 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Switches & Pilot Devices Switches & Pilot Devices Oiltight Switches & Pilot Devices ø22mm - LW Series SpeciŢcations Operating Temperature –25 to +60°C (without freezing) LED illuminated type: –25 to +50°C Storage Temperature –40 to +80°C Operating Humidity 45 to 85% RH A3 Contact Resistance 50mΩ maximum (initial value) Insulation Resistance 100MΩ minimum (500V DC megger) Between live part and ground: 2,500V AC, 1 minute Switch Unit Between terminals of different poles: 2,500V AC, 1 minute Dielectric Strength Between terminals of the same pole: 1,000V AC, 1 minute Illumination Unit Between live part and ground: 2,500V AC, 1 minute Vibration Resistance Operating extremes: 5 to 55Hz, Amplitude 1.0mm p-p 2 Damage limits: 1,000 m/sec (Approx. 100G) Shock Resistance 2 Operating extremes: 100 m/sec (Approx. 10G) Momentary: 1,000,000 operations minimum Mechanical Life Maintained: 500,000 operations minimum Selectors: 250,000 operations minimum Momentary: 100,000 operations minimum (at 1,800 operations/hour) Electrical Life Maintained/Selector: 100,000 operations minimum (at 900 operations/hour) Degree of Protection Watertight/oiltight IP65 (IEC Pub529) (except key selectors) Insulation Voltage 250VAC/DC Lenses polyarylate Materials Operators polyacetate Marking Plates acrylic resin .110" Solder tab/quick connect Terminal Style PC board terminal (gold contacts only) Screw terminal (DPDT units only) Contact Material Thermal Current Contact Rating Remarks 30VDC/0.1A resistive Minimum applicable load (reference value): 5V, 1mA AC/DC. Gold-clad cross-bar 3A (Applicable range is subject to the operating condition and load.) 125VAC/0.1A resistive 30VDC/2A resistive 30VDC/1A inductive 125VAC/3A resistive(50/60Hz) 125VAC/2A inductive (50/60Hz) AC inductive load: PF=0.6 to 0.7, Silver Contact 5A DC inductive load: L/R=7ms maximum. 125VDC/0.4A resistive 125VDC/0.2A inductive 250VAC/2A resistive(50/60Hz) 250VAC/1.5A inductive (50/60Hz) Lamp Ratings Voltage Current/Wattage UL Recognized CSA CertiŢed 6V AC/DC ±10% 17mA max File # E55996 File No. LR21451 12V AC/DC ±10% 11mA max 24V AC/DC ±10% 11mA max 120V AC ±10% 10mA max 240V AC ±10% 10mA max 6.3V AC/DC ±5% 1W Registration No. J9551801 12V AC/DC ±10% 1W 24V AC/DC ±10% 1W LED lamps contains a built-in current-limiting resistor and reverse polarity protection diode. www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A3-109 Incandescent LED Contact Ratings Specifications ø22mm - LW Series Oiltight Switches & Pilot Devices Non-Illuminated Pushbuttons (Assembled) Part Numbers: LW1B/LW2B Pushbuttons Part Number Contact Style Contact Momentary Maintained (Latching) Material Solder/Tab PC Board Screw Solder/Tab PC Board Screw A3 SPDT LW1B-M1C1-①LW1B-M1C1V-①—LW1B-A1C1-①LW1B-A1C1V-①— Round Flush Gold DPDT LW1B-M1C2-①LW1B-M1C2V-①LW1B-M1C2M-①LW1B-A1C2-①LW1B-A1C2V-①LW1B-A1C2M-① 3PDT LW1B-M1C3-①LW1B-M1C3V-①—LW1B-A1C3-①LW1B-A1C3V-①— SPDT LW1B-M1C5-①—— LW1B-A1C5-①—— Silver DPDT LW1B-M1C6-①—LW1B-M1C6M-①LW1B-A1C6-①—LW1B-A1C6M-① 3PDT LW1B-M1C7-①—— LW1B-A1C7-①—— SPDT LW2B-M1C1-①LW2B-M1C1V-①—LW2B-A1C1-①LW2B-A1C1V-①— Square Flush Gold DPDT LW2B-M1C2-①LW2B-M1C2V-①LW2B-M1C2M-①LW2B-A1C2-①LW2B-A1C2V-①LW2B-A1C2M-① 3PDT LW2B-M1C3-①LW2B-M1C3V-①—LW2B-A1C3-①LW2B-A1C3V-①— SPDT LW2B-M1C5-①—— LW2B-A1C5-①—— Silver DPDT LW2B-M1C6-①—LW2B-M1C6M-①LW2B-A1C6-①—LW2B-A1C6M-① 3PDT LW2B-M1C7-①—— LW2B-A1C7-①—— SPDT LW1B-M2C1-①LW1B-M2C1V-①—LW1B-A2C1-①LW1B-A2C1V-①— Round Extended Gold DPDT LW1B-M2C2-①LW1B-M2C2V-①LW1B-M2C2M-①LW1B-A2C2-①LW1B-A2C2V-①LW1B-A2C2M-① 3PDT LW1B-M2C3-①LW1B-M2C3V-①—LW1B-A2C3-①LW1B-A2C3V-①— SPDT LW1B-M2C5-①—— LW1B-A2C5-①—— Silver DPDT LW1B-M2C6-①—LW1B-M2C6M-①LW1B-A2C6-①—LW1B-A2C6M-① 3PDT LW1B-M2C7-①—— LW1B-A2C7-①—— SPDT LW2B-M2C1-①LW2B-M2C1V-①—LW2B-A2C1-①LW2B-A2C1V-①— Square Extended Gold DPDT LW2B-M2C2-①LW2B-M2C2V-①LW2B-M2C2M-①LW2B-A2C2-①LW2B-A2C2V-①LW2B-A2C2M-① 3PDT LW2B-M2C3-①LW2B-M2C3V-①—LW2B-A2C3-①LW2B-A2C3V-①— SPDT LW2B-M2C5-①—— LW2B-A2C5-①—— Silver DPDT LW2B-M2C6-①—LW2B-M2C6M-①LW2B-A2C6-①—LW2B-A2C6M-① 3PDT LW2B-M2C7-①—— LW2B-A2C7-①—— SPDT LW1B-M3C1-①LW1B-M3C1V-①—LW1B-A3C1-①LW1B-A3C1V-①— Mushroom Gold DPDT LW1B-M3C2-①LW1B-M3C2V-①LW1B-M3C2M-①LW1B-A3C2-①LW1B-A3C2V-①LW1B-A3C2M-① 3PDT LW1B-M3C3-①LW1B-M3C3V-①—LW1B-A3C3-①LW1B-A3C3V-①— SPDT LW1B-M3C5-①—— LW1B-A3C5-①—— Silver DPDT LW1B-M3C6-①—LW1B-M3C6M-①LW1B-A3C6-①—LW1B-A3C6M-① 3PDT LW1B-M3C7-①—— LW1B-A3C7-①—— 1. In place of ①, specify Button Color Code from table below. 2. For sub-assembly part numbers, see page A3-111. 3. For dimensions, see page A3-120. 4. For accessories, see page A3-119. Part Numbers: Buzzers (IP20)① Button Color Code Part Number Color Code Style Solder Tab PCB Black B Green G Basic LW1Z-1X4 LW1Z-1X4V Red R With LED LW1Z-1X4D LW1Z-1X4DV Blue S White W 12-24V AC/DC+/- 10% Yellow Y 80 dB (at 0.1m) 7mA (DC), 20mA (AC) A3-110 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Switches & Pilot Devices Switches & Pilot Devices Oiltight Switches & Pilot Devices ø22mm - LW Series Non-Illuminated Pushbuttons (Sub-Assembled) Contact Block + Operator + Button = Completed Unit A3 Part Numbers: Operators Part Number Style Momentary Maintained Round LW1B-M0 LW1B-A0 Square LW2B-M0 LW2B-A0 Mushroom LW1B-M0L LW1B-A0L Part Numbers: Buttons Part Number Type Flush Extended Round LW1A-B1-①LW1A-B2-① ① Button Color Code Color Code Square Black B LW2A-B1-①LW2A-B2-① Green G Red R Mushroom Blue S —LW1A-B3-① White W Yellow Y In place of ①, specify Button Color Code from table at right. Part Numbers: Contact Blocks Part Number Appearance Contact Material Contact Solder/Tab PC Board Screw SPDT LW-C1 LW-C1V — Gold DPDT LW-C2 LW-C2V LW-C2M 3PDT LW-C3 LW-C3V — SPDT LW-C5 — — Silver DPDT LW-C6 — LW-C6M 3PDT LW-C7 — — www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A3-111 ø22mm - LW Series Oiltight Switches & Pilot Devices LED and Incandescent Illuminated Pushbuttons (Assembled) Part Numbers: LW1L/LW2L Illuminated Pushbuttons (LED and Incandescent) Part Number Contact Style Contact Momentary Maintained (Latching) Material A3 Solder/Tab PC Board Screw Solder/Tab PC Board Screw SPDT LW1L-M1C10-➁LW1L-M1C10V-➁— LW1L-A1C10-➁LW1L-A1C10V-➁— Round Gold DPDT LW1L-M1C20-➁LW1L-M1C20V-➁LW1L-M1C20M-➁LW1L-A1C20-➁LW1L-A1C20V-➁LW1L-A1C20M-➁ 3PDT LW1L-M1C30-➁LW1L-M1C30V-➁— LW1L-A1C30-➁LW1L-A1C30V-➁— SPDT LW1L-M1C50-➁—— LW1L-A1C50-➁—— Silver DPDT LW1L-M1C60-➁— LW1L-M1C60M-➁LW1L-A1C60-➁— LW1L-A1C60M-➁ 3PDT LW1L-M1C70-➁—— LW1L-A1C70-➁—— SPDT LW2L-M1C10-➁LW2L-M1C10V-➁— LW2L-A1C10-➁LW2L-A1C10V-➁— Square Gold DPDT LW2L-M1C20-➁LW2L-M1C20V-➁LW2L-M1C20M-➁LW2L-A1C20-➁LW2L-A1C20V-➁LW2L-A1C20M-➁ 3PDT LW2L-M1C30-➁LW2L-M1C30V-➁— LW2L-A1C30-➁LW2L-A1C30V-➁— SPDT LW2L-M1C50-➁—— LW2L-A1C50-➁—— Silver DPDT LW2L-M1C60-➁— LW2L-M1C60M-➁LW2L-A1C60-➁— LW2L-A1C60M-➁ 3PDT LW2L-M1C70-➁—— LW2L-A1C70-➁—— SPDT LW1L-M3C10-➁LW1L-M3C10V-➁— LW1L-A3C10-➁LW1L-A3C10V-➁— Mushroom Gold DPDT LW1L-M3C20-➁LW1L-M3C20V-➁LW1L-M3C20M-➁LW1L-A3C20-➁LW1L-A3C20V-➁LW1L-A3C20M-➁ 3PDT LW1L-M3C30-➁LW1L-M3C30V-➁— LW1L-A3C30-➁LW1L-A3C30V-➁— SPDT LW1L-M3C50-➁—— LW1L-A3C50-➁—— Silver DPDT LW1L-M3C60-➁— LW1L-M3C60M-➁LW1L-A3C60-➁— LW1L-A3C60M-➁ 3PDT LW1L-M3C70-➁—— LW1L-A3C70-➁—— 1. In place of ➁, specify the Lens Color Code from table below. 2. Lamps must be ordered separately for all illuminated pushbuttons. 3. For marking plate size and engraving area, see page A3-124. 4. For sub-assembly part numbers, see page A3-113. 5. For dimensions, see page A3-120. 5. For accessories, see page A3-119. Part Numbers: Lamps (not included in assemblies)➁ Lens/LED Color Code Type Voltage Part Number Color Code 6V AC/DC±10% LSTD-6➁Amber A LED 12V AC/DC±10% LSTD-1➁Green G 24V AC/DC±10% LSTD-2➁Red R 120V AC±10% LSTD-H2➁Blue S 240V AC ±10% LSTD-M4➁White W Incandescent 6.3V AC/DC IS-6 Yellow Y 12V AC/DC IS-12 24V AC/DC IS-24 1. In place of ➁, specify the LED Color Code. 2. The LED contains a current-limiting resistor and reverse polarity protection diode. A3-112 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Switches & Pilot Devices Switches & Pilot Devices Oiltight Switches & Pilot Devices ø22mm - LW Series LED and Incandescent Illuminated Pushbuttons (Sub-Assembled) Contact Block + Operator + Lamp + Lens = Completed Unit A3 Part Numbers: Operators Part Numbers: Lenses Part Number Part Number Style Type Momentary Maintained Flush Round Round LW1A-L1-➁ LW1L-M0 LW1L-A0 Square Square LW2A-L1-➁ LW2L-M0 LW2L-A0 Mushroom LW1A-L3-➁ Mushroom LW1B-M0L LW1B-A0L In place of ➁, specify Lens Color Code from table below. Part Numbers: Contact Blocks Part Number Appearance Contact Material Contact Solder/Tab PC Board Screw SPDT LW-C10 LW-C10V — Gold DPDT LW-C20 LW-C20V LW-C20M 3PDT LW-C30 LW-C30V — SPDT LW-C50 — — Silver DPDT LW-C60 — LW-C60M 3PDT LW-C70 — — Part Numbers: Lamps (not included in assemblies)➁ LED/Lens Color Code Type Voltage Part Number Color Code Amber A 6V AC/DC±10% LSTD-6➁ LED Green G 12V AC/DC±10% LSTD-1➁ Red R 24V AC/DC±10% LSTD-2➁ Blue S 120V AC±10% LSTD-H2➁ White W 240V AC ±10% LSTD-M4➁ Yellow Y Incandescent 6.3V AC/DC IS-6 12V AC/DC IS-12 24V AC/DC IS-24 1. In place of ➁, specify the LED Color Code. 2. The LED contains a current-limiting resistor and reverse polarity protection diode. www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A3-113 ø22mm - LW Series Oiltight Switches & Pilot Devices LED and Incandescent Pilot Lights (Assembled) Part Numbers: LW1P/LW2P Pilot Lights Part Number Type Style Solder/Tab PC Board Screw A3 Round — — LW1P-1C00V-➁ Removable Terminal Pilot Light Square — — LW2P-1C00V-➁ Round — LW1P-10-➁LW1P-10M-➁ Unibody Square Pilot Light LW2P-10-➁— LW2P-10M-➁ 1. In place of ➁, specify the Lens Color Code from table below. 2. For marking plate size and engraving area, see page A3-124. 3. Lamps must be ordered separately, see table below. 4. For sub-assembly part numbers, see page A3-115. 5. For dimensions, see page A3-120. 6. For accessories, see page A3-119. Part Numbers: Lamps (not included in assemblies)➁ Lens/LED Color Code Type Voltage Part Number Color Code 6V AC/DC±10% LSTD-6➁Amber A LED 12V AC/DC±10% LSTD-1➁Green G 24V AC/DC±10% LSTD-2➁Red R 120V AC±10% LSTD-H2➁Blue S 240V AC ±10% LSTD-M4➁ White W Incandescent 6.3V AC/DC IS-6 Yellow Y 12V AC/DC IS-12 24V AC/DC IS-24 1. In place of ➁, specify the LED Color Code. 2. The LED contains a current-limiting resistor and reverse polarity protection diode. A3-114 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Switches & Pilot Devices Switches & Pilot Devices Oiltight Switches & Pilot Devices ø22mm - LW Series LED and Incandescent Pilot Lights (Sub-Assembled) Removable Terminal* + Operator + Lamp + Lens = Completed Unit A3 * Removable terminals are applicable for PCB terminated types only. Part Numbers: Pilot Light Operators Termination Style Solder PC Board Screw Round † LW1P-00 LW1P-00M LW1P-0 Square † LW2P-00 LW2P-00M LW2P-0 1. † Requires LW-C00V removable terminals in addition to operator. 2. Solder and screw terminals are unibody design (they do not use a removable terminal block). Part Numbers: Lenses Type Part Number Round LW1A-P1-➁ Square LW2A-P1-➁ In place of ➁, specify Lens Color Code. Part Numbers: Lamps (not included in assemblies)➁ LED/Lens Color Code Type Voltage Part Number Color Code 6V AC/DC±10% LSTD-6➁Amber A LED 12V AC/DC±10% LSTD-1➁Green G 24V AC/DC±10% LSTD-2➁Red R 120V AC±10% LSTD-H2➁Blue S 240V AC ±10% LSTD-M4➁White W 6.3V AC/DC IS-6 Incandescent Yellow Y 12V AC/DC IS-12 24V AC/DC IS-24 1. In place of ➁, specify the LED Color Code. 2. The LED contains a current-limiting resistor and reverse polarity protection diode. www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A3-115 ø22mm - LW Series Oiltight Switches & Pilot Devices Selector and Keylock Switches (Assembled) Part Numbers: LW1S Selector Switches Part Number Style Position Contact Material Contact Solder/Tab PC Board Screw SPDT LW1S-2C1 LW1S-2C1V — Round 90° 2-position A3 Gold DPDT LW1S-2C2 LW1S-2C2V LW1S-2C2M maintained 3PDT LW1S-2C3 LW1S-2C3V — LR SPDT LW1S-2C5 — — Silver DPDT LW1S-2C6 — LW1S-2C6M 3PDT LW1S-2C7 — — 45° 3-position DPDT LW1S-3C2 LW1S-3C2V LW1S-3C2M Gold maintained 3PDT LW1S-3C3 LW1S-3C3V — C DPDT LW1S-3C6 — LW1S-3C6M LR Silver 3PDT LW1S-3C7 — — 1. Knob color: Black; Directional Indication Color: White 2. For contact operation, see next page. 3. For sub-assembly part numbers, see page A3-118. Part Numbers: LW1K Keylock Selector Switches Part Number Style Position Contact Material Contact Solder/Tab PC Board Screw SPDT LW1K-2C1A LW1K-2C1VA — Round 90° 2-position Gold DPDT LW1K-2C2A LW1K-2C2VA LW1K-2C2MA maintained 3PDT LW1K-2C3A LW1K-2C3VA — LR SPDT LW1K-2C5A — — Silver DPDT LW1K-2C6A — LW1K-2C6MA 3PDT LW1K-2C7A — — 45° 3-position DPDT LW1K-3C2A LW1K-3C2VA LW1K-3C2MA Gold maintained 3PDT LW1K-3C3A LW1K-3C3VA — C DPDT LW1K-3C6A — LW1K-3C6MA LR Silver 3PDT LW1K-3C7A — — 1. Every key selector uses an identical key. 2. The key is removable in all positions. 3. If a different configuration is required, contact an IDEC representative for more information. 4. For contact operation, see next page. 5. For sub-assembly part numbers, see page A3-118. Part Numbers: LW1F LED and Incandescent Illuminated Selector Switches Part Numbers Style Position Contact Material Contact Solder/Tab PC Board Screw Round SPDT LW1F-2C10-➁LW1F-2C10V-➁— 90° 2-position Gold DPDT LW1F-2C20-➁LW1F-2C20V-➁LW1F-2C20M-➁ maintained 3PDT LW1F-2C30-➁LW1F-2C30V-➁— LR SPDT LW1F-2C50-➁—— Silver DPDT LW1F-2C60-➁— LW1F-2C60M-➁ 3PDT LW1F-2C70-➁—— 45° 3-position DPDT LW1F-3C20-➁LW1F-3C20V-➁LW1F-3C20M-➁ Gold maintained 3PDT LW1F-3C30-➁LW1F-3C30V-➁— C LR DPDT LW1F-3C60-➁— LW1F-3C60M-➁ Silver 3PDT LW1F-3C70-➁—— 1. In place of ➁, specify color code. See previous page for color codes. 2. Lamps must be ordered separately for all illuminated pushbuttons. See previous page. 3. For contact operation, see next page. 4. For sub-assembly part numbers, see page A3-118. A3-116 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Switches & Pilot Devices Switches & Pilot Devices Oiltight Switches & Pilot Devices ø22mm - LW Series Contact Operations Contact Operation: Selector and Keylock Switches Operator Position and Contact Position (Top View) Position Contact Left Center Right A3 NO NC NO NC SPDT _ C C Left Right Left Right LR NO NC NO NC NO NC NO NC DPDT _ 90° 2-Position C C C C Maintained Left Center Right Left Center Right NO NC NO NC NO NC NO NC NO NC NO NC 3PDT _ C C C C C C Left Right Left Right Left Right NO NC NO NC NO NC NO NC NO NC NO NC DPDT C LR C C C C C C 45° Left Center Right Left Center Right Left Center Right NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC 3-Position Maintained 3PDT C C C C C C C C C Terminal Arrangements (Bottom View): LW❏L and LW❏B Pushbuttons 3 pole illuminated 2 pole illuminated 3 pole non-illuminated Lamp Lamp Terminal Terminal (+) (+) Lamp Terminal (—) Lamp Terminal (—) SPDT has C, NO and NC only on the SPDT has C, NO and NC only on the center. DPDT has C, NO, and NC only right. DPDT has C, NO, and NC only on the right and left. on the right and center. www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A3-117 X2 X2 X1 C NO NC C NO NC C NO NC X2 X1 C NO NC C NO NC C NO NC C NO NC C NO NC ø22mm - LW Series Oiltight Switches & Pilot Devices Selectors and Key Switches (Sub-Assembled) Contact Block + Operator + Lens* = Completed Unit A3 *Lens for illuminated units only Part Numbers: Operators Unit Position Part Number Part Numbers: Knob (Lens) Non-Illuminated 2-position LW1S-2Y Selector Switch Style Part Number 3-position LW1S-3Y Illuminated Selector Switches Key Switch 2-position LW1K-2A LW1A-F-➁ 3-position LW1K-3A Illuminated 2-position LW1F-20* Selector Switch In place of ➁, specify LED/Lens Color Code from table below. 3-position LW1F-30* * Lens must be purchased separately for illuminated units. Part Numbers: Contact Blocks Part Number Appearance Style Contact Material Contact Solder/Tab PC Board Screw SPDT LW-C10 LW-C10V — Gold DPDT LW-C20 LW-C20V LW-C20M 3PDT LW-C30 LW-C30V — Illuminated Selector Switches SPDT LW-C50 — — Silver DPDT LW-C60 — LW-C60M 3PDT LW-C70 — — SPDT LW-C1 LW-C1V — Gold DPDT LW-C2 LW-C2V LW-C2M 3PDT LW-C3 LW-C3V — Non-Illuminated Selector Switches SPDT LW-C5 — — Silver DPDT LW-C6 — LW-C6M 3PDT LW-C7 — — Part Numbers: Lamps (not included in assemblies)➁ LED/Lens Color Code Type Voltage Part Number Color Code 6V AC/DC±10% LSTD-6➁ Amber A LED 12V AC/DC±10% LSTD-1➁ Green G 24V AC/DC±10% LSTD-2➁ Red R 120V AC±10% LSTD-H2➁ Blue S 240V AC ±10% LSTD-M4➁ White W 6.3V AC/DC IS-6 Incandescent Yellow Y 12V AC/DC IS-12 24V AC/DC IS-24 1. In place of ➁, specify the LED Color Code. 2. The LED contains a current-limiting resistor and reverse polarity protection diode. A3-118 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Switches & Pilot Devices Switches & Pilot Devices Oiltight Switches & Pilot Devices ø22mm - LW Series Accessories — LW Series Style Description/Usage Part Number Ring Wrench (optional) 1. Metallic tool used for tightening the plastic locking ring when install- A3 ing the LW series on a panel. LW9Z-T1 2. Tightening torque should not exceed 1.2N-m (12 kgf-cm) when tightening a locking ring. Lamp Holder Tool (optional) Rubber tool used for replacing incandescent or LED lamps installed in illuminated switches and pilot lights and pilot lights ø0.546" ø0.452" OR-55 (ø14mm) (ø11.6mm) 2.301" (59mm) Terminal Cover Nylon cover for pushbuttons and selectors with solder terminals snaps (for solder tab terminal) onto contact block. LW-VL2 (Insert the lead wires through terminal cover holes before wiring.) Terminal Cover Nylon cover for pushbuttons and selectors for screw terminals snaps (for screw terminal) onto contact block. LW-VL2M (Insert the lead wires through terminal cover holes before wiring.) Terminal Cover (for unibody pilot light with solder tab terminal) Nylon cover for unibody pilot lights with solder terminals. LW-PVL Terminal Cover (for unibody pilot light with screw terminal) Nylon cover for unibody pilot lights with screw terminals. LW-PVLM Black rubber plug Ţlls unused 22mm panel cutouts. Rubber Mounting Hole Plug 0.137" (3.5mm) ø1.131" (ø29mm) OB-31 0.137" ø0.975" (ø25mm) (3.5mm) 1. Used for plugging unnecessary mounting holes in the panel. Tighten Metallic Mounting the attached locking ring to a torque of 1.2N-m (12kgf-cm) maximum Hole Plug 2. Degree of Protection: IP66 ø1.0" (ø25.8mm) LW9Z-BM 0.468" (12mm) 0.117" (3mm) Locking Ring LW9Z-P1-W (round) Replacement White plastic engraving plate for use on all illuminated units (included in each lens). Marking Plates LW9Z-P2-W (square) May be used to capture printed mylar insert (not supplied by IDEC) under lens face. ALW3B (mushroom) Anti-Rotation Ring Prevents rotation of switches in panel. LW9Z-L (included with all selector and key switches only) Replacement Keys One pair of keys. (#231) KG9Z-SK Replacement Use to secure operator to panel. Locking Ring LW9Z-LN (included with all assembled switches and operators) For replacement lamps, see previous page. www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A3-119 LOCK TP O LOCK TP O LOCK LOCK LOCK LOCK LOCK LOCK ø22mm - LW Series Oiltight Switches & Pilot Devices Dimensions: Pushbuttons LW❏L & LW❏B: Illuminated & Non-Illuminated Pushbuttons Gasket M3 Screw Terminal Terminal Cover Panel Thickness: 0.8 to 6 mm LW-VL2 Locking Ring Terminal Cover Extended LW-VL2M A3 9 12.6 54.9 47 Mushroom 9 17 25 25 25.4 26.5 Screw Terminal PC Board Terminal Solder/Tab Terminal PC Board Terminal Solder/Tab Terminal Round Width 2.8 × 0.5t Width 0.8 × 0.5t Round Square w/Square Bezel 1.0 2.6 2-R0.6 8.5 11.7 2.6 25.8 25.8 53.5 5.4 36 936 9 ∗ Screw Terminal PC Board Terminal Solder/Tab Terminal Terminal Cover Gasket M3 Screw terminal Panel Thickness: 0.8 to 6 mm LW-VL2 Locking Ring Extended Terminal Cover LW-VL2M 9 12.6 54.9 47 Mushroom 9 17 25.4 25 25 26.5 Screw Terminal PC Board Terminal Solder/Tab Terminal PC Board Terminal Tab Terminal (solder) Round 1.0 2.6 0.8 × 0.5t Width 2.8 × 0.5t Round Square w/Square Bezel 2-R0.6 8.5 11.7 25.8 25.8 53.5 936 9 5.4 36 ∗ Screw Terminal PC Board Terminal Solder/Tab Terminal A3-120 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC ø 25.8 ø25.8 ø30 ø 30 R18 R18 R18 R18 R18 R18 Switches & Pilot Devices 8.2 6.2 23.2 2.0 23.2 8.2 2.0 6.2 5 5 5 5 6.8 6.8 1.2 1.2 16.2 16.2 4.85 X2 X1 X2 X2 X2 X1 6.8 6.8 C NO NC C NO NC 4.85 6.5 C NO NC C NO NC 6 6 6.8 6.8 6 6 18.2 1.2 1.2 4.85 18.2 16.2 16.2 6.8 6.8 4.85 6.5 1.2 1.2 Switches & Pilot Devices LOCK TP O T O P O P Oiltight Switches & Pilot Devices ø22mm - LW Series Dimensions: Pilot Lights LW1P/LW2P Pilot Lights Gasket Panel Thickness: 0.8 to 6 mm Terminal Cover M3 Screw terminal Panel Thickness: 0.8 to 6 mm Locking Ring Locking Ring LW-PVL Terminal Cover LW-PVLM A3 Gasket ∗ 36 36 Round Tab Terminal (solder) PC Board Terminal (solder) 7.2 Round Square w/Square Bezel Width 2.8 × 0.5t 0.8 × 0.5t 19 2 8.5 11.7 25.8 25.8 ∗ 7.7 26.8 7.5 27 9 5.5 9 36 Screw Terminal Solder/Tab Terminal PC Board Terminal 1.0 2.6 2-R0.6 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A3-121 ø25.8 4.5 6.0 5.95 6.75 1.2 5 5 1.2 11.35 LOCK LOCK TOP TP O LOCK LOCK LOCK ø22mm - LW Series Oiltight Switches & Pilot Devices Dimensions: Selector and Keylock Switches LW1S and LW1K Selector and Keylock Switches Terminal Cover Gasket Panel Thickness: 0.8 to 6 mm Locking Ring LW-VL2 M3 Screw Terminal Terminal Cover LW-VL2M A3 Anti-Rotation Ring 54.9 47 2.6 PC Board Terminal Tab Terminal (solder) Round Round Width 0.8 × 0.5t Width 2.8 × 0.5t w/Square Bezel 2 8.5 11.7 9 25.8 ∗ 5.4 36 9 53.5 36 17.5 Screw Terminal PC Board Terminal Solder/Tab Terminal Terminal Cover Gasket Panel Thickness 0.8 to 6 mm Locking Ring LW-VL2 Anti-Rotation Ring 0.5 47 2.6 Tab Terminal (solder) Round Round Width 2.8 × 0.5t w/Square Bezel 8.5 11.7 10.5 25.8 ∗ 9 36 37 Solder/Tab Terminal 1.0 2.6 25.4 25 2-R0.6 Screw Terminal PC Board Terminal 25 26.2 Solder/Tab Terminal A3-122 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC ø25.8 ø 25.8 R18 R18 R18 Switches & Pilot Devices 23.2 8.2 2.0 6.2 18.2 16.2 16.2 X2 X2 X1 C NO NC 6.8 6.8 5 5 C NO NC 4.85 1.2 6.8 6.8 6.8 6.8 6 6 66 4.85 4.85 1.2 1.2 1.2 Switches & Pilot Devices LOCK TOP LOCK LOCK LOCK Oiltight Switches & Pilot Devices ø22mm - LW Series Dimensions: Selector and Keylock Switches, continued and Layouts LW1F LED and Incandescent Illuminated Selector Switches Terminal Cover Gasket Panel Thickness: 0.8 to 6 mm Round LW-VL2 Locking Ring M3 Screw Terminal w/Square Bezel Round A3 Terminal Cover LW-VL2M Anti-Rotation 0.5 25.8 Ring 54.9 47 PC Board Terminal (solder) Tab Terminal (solder) 0.8 × 0.5t Width 2.8 × 0.5t 2.6 11.7 9 8.5 25.4 25 25 53.5 9 36 17.5 5.4 36 26.2 PC Board Terminal Solder/Tab Terminal PC Board Terminal Solder/Tab Terminal Screw Terminal Screw Terminal 1.0 2.6 2-R0.6 Layouts LW❏L PC Board Drilling Layout LW❏B PC Board Drilling Layout PC Board Terminal PC Board Terminal Bottom View Bottom View Pilot Lights 0.265" 0.265" PC Board Drilling Layout (6.8mm) (6.8mm) PC Board Terminal 0.265" (6.8mm) 0.265" (6.8mm) 0.189" (4.85mm) 0.189" (4.85mm) 0.195" 0.195" Bottom View (5mm) (5mm) 0.254" (6.5mm) 0.047" (1.2mm) 0.443" (11.35mm) 0.195" 0.195" 0.195" (5mm) (5mm) (5mm) 0.195" 0.047" 0.047" (5mm) ø0.047" (ø1.2mm) holes ø0.047" (ø1.2mm) holes (1.2mm) (1.2mm) ø0.047" (ø1.2mm) holes Mounting Hole Layout 1. When determining mounting centerlines, allow for easy operation. +0.02" 2. Mushroom (Ø 1.17" (Ø 30mm)) = 1.248" (32mm) ø0.87" - 0 Tab terminal = 1.014" (26mm) (with/without terminal cover) +0.16" (ø22.3 mm) 0 PC board terminal = 1.014" (26mm) Screw terminal = 1.56" (40mm) 3. Mushroom (Ø 1.17" (Ø 30mm) = 1.248" (32mm) Tab terminal = 1.053" (27mm) (with terminal cover) Tab terminal = 1.014" (26mm) (without terminal cover) PC board terminal = 1.014" (26mm) Screw terminal = 1.014" (26mm) 1.014" (26mm) Note 3 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A3-123 ø25.8 R18 R18 R18 1.014" (26mm) Note 2 8.2 6.8 6.8 5 5 4.85 6.5 1.2 6.8 6.8 6 6 4.85 6.5 1.2 1.2 23.2 16.2 X2 X2 X1 C NO NC C NO NC 18.2 16.2 ø22mm - LW Series Oiltight Switches & Pilot Devices Instructions — LW Series the same direction. Then push the lamp lightly and turn it clockwise. Replacement of Lens & Marking Plate Grooves in the Removing Operator Unit 1. Remove the operator (lens, marking plate, and lens holder) by inserting a A3 screwdriver into the recess of the lens through the bezel. Replacement of Lamps by Removing the Contact Block The lamp can be replaced by removing the contact block without using the lamp holder tool. Marking Plates & Films For LW series illuminated pushbuttons and pilot lights, legends and symbols can be engraved on marking plates, or printed mylar can be inserted under the 2. Remove the marking plate by pushing the lens from the rear to disengage lens for labelling purposes. the latches between the lens and the lens holder, using the screwdriver as shown below. Marking Plate and Marking Film Size Lens Style Round Lens Square Lens Engraving Engraving Area Area Built-in ø0.694" (ø17.8mm) Marking ø0.683" (ø17.5mm) 0.033" 0.033" The translucent filter in the lens holder can Plate (0.85mm) (0.85mm) not be removed because this filter is sealed to make the unit waterproof and oiltight. Engraving must be made on the engraving area within 0.02" (0.5mm) deep. Installing The marking plate is made of white acrylic resin. For round lens types, place the marking plate on the lens holder with the anti- rotation projection engaged and press the lens onto the lens holder to engage the latches. For square lens types, insert the marking plate into the lens, and press the lens onto the lens holder to engage the latches. Pay attention to the orientation of the marking plate. Pay attention to the orientation of the marking plate. Applicable Marking 0.69" (17.7mm) Film For Round Lens For Square Lens Mylar for printing labels are not included and must be provided and printed by user. Two 0.004" (0.1mm)-thick Ţlms or one 0.008" (0.2mm)-thick Ţlm can be installed in the lens. Recommended marking Ţlm: Mylar Insertion Order of Marking Plate & Film Lens Marking Plate Lens Holder Lens Marking Plate Lens Holder Top Marking Side For Round Lens Replacement of Lamps Lamps can be replaced using the lamp holder tool (OR-55) from the front of the panel. Also by removing the contact block from the operator unit, the lamp can be replaced. Replacement of Lamps from the Front of the Panel. (How to Remove) Lens Film Marking Plate Lens Holder Housing 1. Push and turn the lamp counterclockwise using the side A of the lamp holder tool, and the lamp and the lamp holder can be removed. Insertion Order of Marking Plate & Film. Top Marking Side For Square Lens (How to Install) Lens Film Marking Plate Lens Holder Housing 1. Insert the lamp into the lamp holder tool and hold the lamp as in the 1. Mylar is not included. following illustration. 2. Pay attention to the orientation of marking plate. Lamp Lamp Holder Tool 2. Place the insertion guide of the lamp and the groove in the operator unit in A3-124 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Switches & Pilot Devices 0.772" (19.8mm) 0.772" (19.8mm) Switches & Pilot Devices Oiltight Switches & Pilot Devices ø22mm - LW Series Instructions con’t Panel Mounting Connection Remove the contact block from the operator. Insert the operator into the panel Positive-lock connector and easy-lock connector are applicable to cut-out from the front, then install the contact block to the operator. tab terminals. Removing the Contact Block A3 Turn the locking lever on the contact block in the direction opposite to the Single Board Mounting arrow on the housing. Then the contact block can be removed. Installing the Contact Block Mounting the switches and pilot lights on one PC board offers the following Insert the contact block, with the TOP markings on the contact block and the features. operator placed in the same direction. Then lock the units, turning the locking 1. Reduced installation labor, easy wiring, space saving, and standardization. lever in the direction of the arrow. 2. Since the contact blocks on the PC board can be removed easily using a locking lever, the LW series switches and pilot lights are easy to maintain. 3. Because the LW series switches and pilot lights require no studs for fasten- ing the control unit to a PC board, special preparation of operation panel is not needed. For details on one board mounting, contact IDEC. Notes on Mounting Use the optional Ring Wrench (LW9Z-T1) to mount the operator onto a panel. Tightening torque should not exceed 1.2N-m (12 kgf-cm). Do not use pliers. Excessive tightening will damage the locking ring. Wiring 1. Solder the terminals within 20W/5 seconds or 260°C/3 seconds without exerting external force to the terminals. While soldering, do not touch the soldering iron to the housing. While wiring, prevent tension from being applied to the terminals. Do not bend or raise the terminals, nor exert excessive force Light Touch And High Reliability to terminals. 2. Use a non-corrosive resin liquid ţux. Collective Mounting As the locking lever can be turned easily from the rear of the units using a 0.117" screwdriver, the contact blocks can be removed even when Stroke (3mm) mounted collectively. Operating-force Snap Switching Mechanism Notes for Terminal Cover 2000 TW series pushbutton (Solder/Tab Terminal) (SPST-NO/SPST-NC) Insert the terminal cover into the contact block with the TOP markings on the contact block and the terminal cover in the same direction. 1500 When wiring, insert the lead wires into the terminal cover holes before wiring. Load (g) 1000 LW series pushbutton (Momentary DPDT) 500 LW series pushbutton (Momentary SPDT) Notes for Wiring 0 0.039"0.078"0.117"0.156"0.195"0.234" (1mm) (2mm) (3mm) (4mm) (5mm) (6mm) When installing a terminal cover onto the solder/tab terminal contact block, solder the inside of lamp terminal (toward the switch terminals) and wire. Stroke (Screw Terminal Type) Install a terminal cover to the control unit before wiring. 1. After wiring, terminal covers cannot be installed. 2. When terminal covers are used, round crimping terminals cannot be used. www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A3-125