IDEC CORPORATION LW6J-3C74GRG

LW Silhouette Series Illuminated Key Selector Switches Pushbuttons and Illuminated Pushbuttons with Round Guard LW Silhouette Switches 5HVLVWRU LW Silhouette Series Illuminated Key Selector Switches The two-way split illumination on the ring shows the key position or equipment status, making it possible to reduce the number of control units required. Metal or black plastic bezel available. Illumination Color & Combination Color Right and Left Left Illuminated Right Illuminated Illuminated Left Right Red Red (R) (R) Metal Bezel Green Green (G) (G) White White (W) (W) Black Plastic Bezel Internal Circuit /HIW,OOXPLQDWLRQ Red Green  ² (R) (G) :LUHFRORU :LUHFRORU %URZQ %ODFN 5LJKW,OOXPLQDWLRQ  Green Red (G) (R) :LUHFRORU 5HG ,OOXPLQDWLRQ5DWHG9ROWDJH9'& /('&KLS Blue Blue (S) (S) 3URWHFWLRQ'LRGH =HQHU'LRGH Note: RG and GR combinations are available in 3-position models only. New guard for round pushbuttons and illuminated pushbuttons Flush Silhouette is an IDEC trademark for control units with flush bezels. 2 LW Silhouette Illuminated Key Selector Switches Ring-illuminated Key Selector Switches with Round Metal Bezel (2- and 3-position) Ordering Part No. Operation Key Retained Contact ➁ Ring Illumination Shape Contact Type at ● Material Color Code Solder/Tab Terminal PC Board Terminal Screw Terminal Round A SPDT LW6MJ-2C14 A LW6MJ-2C14V A — ➁ ➁ Metal Bezel Gold DPDT LW6MJ-2C24➁A LW6MJ-2C24V➁A LW6MJ-2C24M➁A LW6MJ 3PDT LW6MJ-2C34➁A LW6MJ-2C34V➁A — LR SPDT LW6MJ-2C54➁A — — Silver DPDT LW6MJ-2C64 A — LW6MJ-2C64M A ➁ ➁ 3PDT LW6MJ-2C74➁A — — B SPDT LW6MJ-2C14➁B LW6MJ-2C14V➁B — Gold DPDT LW6MJ-2C24➁B LW6MJ-2C24V➁B LW6MJ-2C24M➁B 90° 3PDT LW6MJ-2C34 B LW6MJ-2C34V B — ➁ ➁ L R 2-position SPDT LW6MJ-2C54➁B — — Maintained Silver DPDT LW6MJ-2C64➁B — LW6MJ-2C64M➁B GG: green/green WW: white/white 3PDT LW6MJ-2C74➁B — — RR: red/red C SPDT LW6MJ-2C14 C LW6MJ-2C14V C — ➁ ➁ SS: blue/blue Gold DPDT LW6MJ-2C24➁C LW6MJ-2C24V➁C LW6MJ-2C24M➁C 3PDT LW6MJ-2C34➁C LW6MJ-2C34V➁C — L R SPDT LW6MJ-2C54➁C — — Silver DPDT LW6MJ-2C64 C — LW6MJ-2C64M C ➁ ➁ 3PDT LW6MJ-2C74➁C — — B SPDT LW6MJ-21C14➁B LW6MJ-21C14V➁B — Gold DPDT LW6MJ-21C24➁B LW6MJ-21C24V➁B LW6MJ-21C24M➁B 90° 2-position 3PDT LW6MJ-21C34 B LW6MJ-21C34V B — ➁ ➁ L R Spring SPDT LW6MJ-21C54➁B — — Return from Right Silver DPDT LW6MJ-21C64➁B — LW6MJ-21C64M➁B 3PDT LW6MJ-21C74➁B — — • Specify a color code in place of ➁ in the Part No. SS (blue/blue) is also available. • For the illumination specifications, see page 9. • Two keys are supplied. • Key cylinder face material: Metal • To select key numbers, specify numbers 501 to 515 after the Part No. When a key number is not specified, key number 500 is supplied as standard. Example: LW6MJ-2C14RRA-501 501 to 515 Other than the above 16 keys, 44 additional keys are also available. Contact Operation Operator Position and Contact Position Operator Position and Contact Position Operation Operation Contact Contact Type Type Left Right Left Center Right Left Right Left Right Left Right Left Right Left Right Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC SPDT DPDT DPDT LR C LR C C C C C C C C C C 90° 45° Left Center Right Left Center Right Left Center Right Left Center Right Left Center Right 2-position 3-position Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact NO NC NONCNONC NO NC NONCNONC NO NC NONCNONC NO NC NONCNONC NO NC NONCNONC 3PDT 3PDT C C C C C C C C C C C C C C C 3 LW Silhouette Illuminated Key Selector Switches Ordering Part No. Operation Key Retained Contact ➁ Ring Illumination Shape Contact Type at ● Material Color Code Solder/Tab Terminal PC Board Terminal Screw Terminal DPDT LW6MJ-3C24 A LW6MJ-3C24V A LW6MJ-3C24M A Round A ➁ ➁ ➁ Gold Metal Bezel 3PDT LW6MJ-3C34➁A LW6MJ-3C34V➁A — C L R LW6MJ DPDT LW6MJ-3C64➁A — LW6MJ-3C64M➁A Silver 3PDT LW6MJ-3C74➁A — — DPDT LW6MJ-3C24➁B LW6MJ-3C24V➁B LW6MJ-3C24M➁B B Gold 3PDT LW6MJ-3C34 B LW6MJ-3C34V B — ➁ ➁ C L R DPDT LW6MJ-3C64➁B — LW6MJ-3C64M➁B Silver 3PDT LW6MJ-3C74➁B — — DPDT LW6MJ-3C24➁C LW6MJ-3C24V➁C LW6MJ-3C24M➁C C Gold 3PDT LW6MJ-3C34➁C LW6MJ-3C34V➁C — C L R DPDT LW6MJ-3C64➁C — LW6MJ-3C64M➁C Silver 3PDT LW6MJ-3C74➁C — — DPDT LW6MJ-3C24➁D LW6MJ-3C24V➁D LW6MJ-3C24M➁D D Gold 45° C 3PDT LW6MJ-3C34 D LW6MJ-3C34V D — ➁ ➁ L R 3-position DPDT LW6MJ-3C64➁D — LW6MJ-3C64M➁D Maintained Silver 3PDT LW6MJ-3C74➁D — — DPDT LW6MJ-3C24 E LW6MJ-3C24V E LW6MJ-3C24M E E ➁ ➁ ➁ Gold 3PDT LW6MJ-3C34➁E LW6MJ-3C34V➁E — C L R DPDT LW6MJ-3C64➁E — LW6MJ-3C64M➁E Silver 3PDT LW6MJ-3C74➁E — — DPDT LW6MJ-3C24➁G LW6MJ-3C24V➁G LW6MJ-3C24M➁G G Gold C 3PDT LW6MJ-3C34➁G LW6MJ-3C34V➁G — L R DPDT LW6MJ-3C64➁G — LW6MJ-3C64M➁G Silver 3PDT LW6MJ-3C74➁G — — DPDT LW6MJ-3C24 H LW6MJ-3C24V H LW6MJ-3C24M H H ➁ ➁ ➁ Gold GG: green/green 3PDT LW6MJ-3C34➁H LW6MJ-3C34V➁H — C L R GR: green/red DPDT LW6MJ-3C64➁H — LW6MJ-3C64M➁H Silver WW: white/white 3PDT LW6MJ-3C74➁H — — RG: red/green DPDT LW6MJ-31C24➁B LW6MJ-31C24V➁B LW6MJ-31C24M➁B B RR: red/red Gold C 3PDT LW6MJ-31C34➁B LW6MJ-31C34V➁B — L R SS: blue/blue DPDT LW6MJ-31C64➁B — LW6MJ-31C64M➁B Silver 3PDT LW6MJ-31C74➁B — — 45° DPDT LW6MJ-31C24 D LW6MJ-31C24V D LW6MJ-31C24M D D ➁ ➁ ➁ Gold 3-position 3PDT LW6MJ-31C34➁D LW6MJ-31C34V➁D — C L Spring R DPDT LW6MJ-31C64➁D — LW6MJ-31C64M➁D Return from Silver Right 3PDT LW6MJ-31C74➁D — — DPDT LW6MJ-31C24➁G LW6MJ-31C24V➁G LW6MJ-31C24M➁G G Gold C 3PDT LW6MJ-31C34➁G LW6MJ-31C34V➁G — L R DPDT LW6MJ-31C64➁G — LW6MJ-31C64M➁G Silver 3PDT LW6MJ-31C74➁G — — DPDT LW6MJ-32C24 C LW6MJ-32C24V C LW6MJ-32C24M C ➁ ➁ ➁ C Gold 3PDT LW6MJ-32C34➁C LW6MJ-32C34V➁C — C L R DPDT LW6MJ-32C64➁C — LW6MJ-32C64M➁C Silver 3PDT LW6MJ-32C74 C — — ➁ 45° DPDT LW6MJ-32C24 D LW6MJ-32C24V➁D LW6MJ-32C24M➁D D * Gold 3-position 3PDT LW6MJ-32C34*D LW6MJ-32C34V➁D — C L Spring R DPDT LW6MJ-32C64 D — LW6MJ-32C64M➁D * Return Silver from Left 3PDT LW6MJ-32C74 D — — * DPDT LW6MJ-32C24➁H LW6MJ-32C24V*H LW6MJ-32C24M➁H H Gold 3PDT LW6MJ-32C34➁H LW6MJ-32C34V*H — C L R DPDT LW6MJ-32C64➁H — LW6MJ-32C64M➁H Silver 3PDT LW6MJ-32C74➁H — — 45° DPDT LW6MJ-33C24➁D LW6MJ-33C24V➁D LW6MJ-33C24M➁D D Gold 3-position 3PDT LW6MJ-33C34➁D LW6MJ-33C34V➁D — C Spring L R DPDT LW6MJ-33C64➁D — LW6MJ-33C64M➁D Return Silver Two-way 3PDT LW6MJ-33C74➁D — — • Specify a color code in place of ➁ in the Part No. SS (blue/blue) is also available. • For the illumination specifications, see page 9. • Two keys are supplied. • Key cylinder face material: Metal • To select key numbers, specify numbers 501 to 515 after the Part No. When a key number is not specified, key number 500 is supplied as standard. Example: LW6MJ-3C24RRA-501 501 to 515 Other than the above 16 keys, 44 additional keys are also available. • See page 3 for contact operation. 4 LW Silhouette Illuminated Key Selector Switches Ring-illuminated Key Selector Switches with Round Plastic Bezel (2- and 3-position) Ordering Part No. Operation Key Retained Contact Ring Illumination ➁ Shape Contact Type at Material Color Code ● Solder/Tab Terminal PC Board Terminal Screw Terminal Round A SPDT LW6J-2C14➁A LW6J-2C14V➁A — Black Plastic Bezel DPDT LW6J-2C24 A LW6J-2C24V A LW6J-2C24M A Gold ➁ ➁ ➁ LW6J 3PDT LW6J-2C34➁A LW6J-2C34V➁A — LR SPDT LW6J-2C54➁A — — Silver DPDT LW6J-2C64➁A — LW6J-2C64M➁A 3PDT LW6J-2C74 A — — ➁ B SPDT LW6J-2C14➁B LW6J-2C14V➁B — Gold DPDT LW6J-2C24➁B LW6J-2C24V➁B LW6J-2C24M➁B 90° 3PDT LW6J-2C34➁B LW6J-2C34V➁B — L R 2-position SPDT LW6J-2C54 B — — ➁ Maintained Silver DPDT LW6J-2C64➁B — LW6J-2C64M➁B GG: green/green WW: white/ 3PDT LW6J-2C74➁B — — white C SPDT LW6J-2C14➁C LW6J-2C14V➁C — RR: red/red Gold DPDT LW6J-2C24 C LW6J-2C24V C LW6J-2C24M C SS: blue/blue ➁ ➁ ➁ 3PDT LW6J-2C34➁C LW6J-2C34V➁C — L R SPDT LW6J-2C54➁C — — Silver DPDT LW6J-2C64➁C — LW6J-2C64M➁C 3PDT LW6J-2C74 C — — ➁ B SPDT LW6J-21C14➁B LW6J-21C14V➁B — Gold DPDT LW6J-21C24➁B LW6J-21C24V➁B LW6J-21C24M➁B 90° 2-position 3PDT LW6J-21C34➁B LW6J-21C34V➁B — L R Spring SPDT LW6J-21C54 B — — ➁ Return from Right Silver DPDT LW6J-21C64➁B — LW6J-21C64M➁B 3PDT LW6J-21C74➁B — — • Specify a color code in place of ➁ in the Part No. SS (blue/blue) is also available. • For the illumination specifications, see page 9. • Two keys are supplied. • Key cylinder face material: Metal • To select key numbers, specify numbers 501 to 515 after the Part No. When a key number is not specified, key number 500 is supplied as standard. Example: LW6J-2C14RRA-501 501 to 515 Other than the above 16 keys, 44 additional keys are also available. Contact Operation Operator Position and Contact Position Operator Position and Contact Position Operation Operation Contact Contact Type Type Left Right Left Center Right Left Right Left Right Left Right Left Right Left Right Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC NO NC SPDT DPDT DPDT LR C LR C C C C C C C C C C 90° 45° Left Center Right Left Center Right Left Center Right Left Center Right Left Center Right 2-position 3-position Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact Contact NO NC NONCNONC NO NC NONCNONC NO NC NONCNONC NO NC NONCNONC NO NC NONCNONC 3PDT 3PDT C C C C C C C C C C C C C C C 5 LW Silhouette Illuminated Key Selector Switches Ordering Part No. Operation Key Retained Contact ➁ Ring Illumination Shape Contact Type at ● Material Color Code Solder/Tab Terminal PC Board Terminal Screw Terminal DPDT LW6J-3C24➁A LW6J-3C24V➁A LW6J-3C24M➁A Round A Gold Black Plastic Bezel 3PDT LW6J-3C34 A LW6J-3C34V A — ➁ ➁ C L R LW6J DPDT LW6J-3C64➁A — LW6J-3C64M➁A Silver 3PDT LW6J-3C74➁A — — DPDT LW6J-3C24 B LW6J-3C24V B LW6J-3C24M B B ➁ ➁ ➁ Gold 3PDT LW6J-3C34➁B LW6J-3C34V➁B — C L R DPDT LW6J-3C64➁B — LW6J-3C64M➁B Silver 3PDT LW6J-3C74➁B — — DPDT LW6J-3C24➁C LW6J-3C24V➁C LW6J-3C24M➁C C Gold C 3PDT LW6J-3C34➁C LW6J-3C34V➁C — L R DPDT LW6J-3C64➁C — LW6J-3C64M➁C Silver 3PDT LW6J-3C74➁C — — DPDT LW6J-3C24 D LW6J-3C24V D LW6J-3C24M D D ➁ ➁ ➁ Gold 45° C 3PDT LW6J-3C34➁D LW6J-3C34V➁D — L R 3-position DPDT LW6J-3C64➁D — LW6J-3C64M➁D Maintained Silver 3PDT LW6J-3C74➁D — — DPDT LW6J-3C24➁E LW6J-3C24V➁E LW6J-3C24M➁E E Gold C 3PDT LW6J-3C34➁E LW6J-3C34V➁E — L R DPDT LW6J-3C64➁E — LW6J-3C64M➁E Silver 3PDT LW6J-3C74➁E — — DPDT LW6J-3C24 G LW6J-3C24V G LW6J-3C24M G G ➁ ➁ ➁ Gold 3PDT LW6J-3C34➁G LW6J-3C34V➁G — C L R DPDT LW6J-3C64➁G — LW6J-3C64M➁G Silver 3PDT LW6J-3C74 G — — ➁ DPDT LW6J-3C24➁H LW6J-3C24V➁H LW6J-3C24M➁H H Gold C 3PDT LW6J-3C34➁H LW6J-3C34V➁H — L GG: green/green R DPDT LW6J-3C64➁H — LW6J-3C64M➁H GR: green/red Silver 3PDT LW6J-3C74➁H — — WW: white/white RG: red/green DPDT LW6J-31C24➁B LW6J-31C24V➁B LW6J-31C24M➁B B Gold RR: red/red 3PDT LW6J-31C34➁B LW6J-31C34V➁B — C L R SS: blue/blue DPDT LW6J-31C64➁B — LW6J-31C64M➁B Silver 3PDT LW6J-31C74 B — — ➁ 45° DPDT LW6J-31C24➁D LW6J-31C24V➁D LW6J-31C24M➁D D 3-position Gold C 3PDT LW6J-31C34➁D LW6J-31C34V➁D — Spring L R Return from DPDT LW6J-31C64➁D — LW6J-31C64M➁D Silver Right 3PDT LW6J-31C74➁D — — DPDT LW6J-31C24➁G LW6J-31C24V➁G LW6J-31C24M➁G G Gold 3PDT LW6J-31C34➁G LW6J-31C34V➁G — C L R DPDT LW6J-31C64➁G — LW6J-31C64M➁G Silver 3PDT LW6J-31C74 G — — ➁ DPDT LW6J-32C24➁C LW6J-32C24V➁C LW6J-32C24M➁C C Gold C 3PDT LW6J-32C34➁C LW6J-32C34V➁C — L R DPDT LW6J-32C64➁C — LW6J-32C64M➁C Silver 3PDT LW6J-32C74➁C — — 45° DPDT LW6J-32C24➁D LW6J-32C24V➁D LW6J-32C24M➁D D Gold 3-position C 3PDT LW6J-32C34➁D LW6J-32C34V➁D — L R Spring DPDT LW6J-32C64➁D — LW6J-32C64M➁D Return from Silver 3PDT LW6J-32C74 D — — Left ➁ DPDT LW6J-32C24➁H LW6J-32C24V➁H LW6J-32C24M➁H H Gold C 3PDT LW6J-32C34➁H LW6J-32C34V➁H — L R DPDT LW6J-32C64 H — LW6J-32C64M H ➁ ➁ Silver 3PDT LW6J-32C74➁H — — 45° DPDT LW6J-33C24➁D LW6J-33C24V➁D LW6J-33C24M➁D D Gold 3-position 3PDT LW6J-33C34➁D LW6J-33C34V➁D — C L Spring R DPDT LW6J-33C64➁D — LW6J-33C64M➁D Return Silver Two-way 3PDT LW6J-33C74 D — — ➁ • Specify a color code in place of ➁ in the Part No. SS (blue/blue) is also available. • For the illumination specifications, see page 9. • Two keys are supplied. • Key cylinder face material: Metal • To select key numbers, specify numbers 501 to 515 after the Part No. When a key number is not specified, key number 500 is supplied as standard. Example: LW6J-3C24RRA-501 501 to 515 Other than the above 16 keys, 44 additional keys are also available. • See page 5 for contact operation. 6 TOP LOCK LOCK LOCK LW Silhouette Illuminated Key Selector Switches Contact Ratings Specifications Operating Temperature –25 to +50°C (no freezing) Gold Contacts (switch base: blue) • Storage Temperature –40 to +80°C Maximum Voltage 250V Operating Humidity 45 to 85% RH (no condensation) Thermal Current 3A Contact Resistance 50 mΩ maximum (initial value) Operating Voltage 30V DC 125V AC Insulation Resistance 100 MΩ minimum (500V DC megger) Operating Current 0.1A 0.1A (resistive load) Between live part and ground: 2500V AC, 1 minute Contact Material Gold-clad silver Between terminals of different poles: Dielectric Strength (switch) Minimum applicable load (reference value) = 5V AC/DC, 1 mA 2500VAC, 1 minute (Applicable range is subject to the operating condition and load.) Between terminals of the same pole: AC1000V, 1 minute Silver Contacts (switch base: gray) • Overvoltage Category II Operating Voltage 30V 125V 250V Impulse Withstand Voltage 0.5kV Resistive Load 3A 2A — AC Pollution Degree 2 50/60Hz Inductive Load — 2A 1.5A 2 Operating Operating extremes: 100 m/s Shock Resistance 2 Current Damage limits: 1000 m/s Resistive Load 2A 0.4A — DC Inductive Load 1A 0.2A Operating extremes: — Vibration Resistance 5 to 55 Hz, amplitude 0.5 mm Thermal Current 5A Mechanical Life 100,000 operations Contact Material Silver 100,000 operations Electrical Life AC inductive load: PF = 0.6 to 0.7 (switching frequency 900 operations/h) DC inductive load: L/R = 7 ms max. Degree of Protection IP65 (IEC 60529) Solder/tab terminal #110 Illumination Ratings Terminal Style PC board terminal Current Screw terminal Rated Voltage Operating Voltage Two-way 60g (LW6MJ-2C34➁A) Full Illumination Weight (approx.) Split Illumination 58g (LW6J-2C34➁A) 24V DC 24V DC ±10% 18 mA 9 mA For other specifications, see Cat. No. EP1144-0. The illumination part is UL-recognized and CSA-certified subject to use within in Class 2 circuit. Bottom View Dimensions Panel Thickness 0.8 to 3.2 Terminal Cover Terminal Cover Rubber Gasket LW-VL2M LW-VL2 Mounting Bracket M3 Screw Locking Ring Terminal 25 25 25.4 26.2 Screw Terminal PC Board Terminal Solder/Tab Terminal 54 61.9 300 Solder/Tab Terminal PC Board Terminal Round Width 2.8 × 0.5t Width 0.8 × 0.5t Mounting Hole Layout • 2 1 2.6 8.5 18.7 3.4 18 60.5 5.5 43 9 43 26.4  ¡² Screw Terminal Type PC Board Terminal Type Solder/Tab Terminal Type • Mounting centers Vertical: 28 mm minimum Horizontal: 33 mm minimum Terminal Arrangement (Bottom View) Note: Determine the mounting centers to ensure ease of operation. • Solder/Tab Terminal • Screw Terminal • PC Board Terminal TOP TOP Note: SPDT has C, NO, and NC only in the center. DPDT has C, NO, and NC only on the right and left. Screw terminal type is only available in DPDT configuration. 7 ø28 2-R0.6 R18 R18 R18 8.2 6.2 2.0 6.8 6.8 5 5 4.85 1.2 6.8 6.8 6 6 4.85 1.2 1.2 23.2 16.2 X2 X2 X1 C NO NC C NO NC 18.2 16.2 X2 X2 X1 NO NC C NO NC C 5HVLVWRU LW Silhouette Illuminated Key Selector Switches Internal Circuit Illumination • /HIW,OOXPLQDWLRQ Full Illumination Left Illumination Right Illumination  ² :LUHFRORU :LUHFRORU %URZQ %ODFN 5LJKW,OOXPLQDWLRQ /('&KLS  3URWHFWLRQ'LRGH :LUHFRORU 5HG =HQHU'LRGH ,OOXPLQDWLRQ5DWHG9ROWDJH9'& PC Board Drilling Layout (Bottom View) Note the pattern of the PC board as the terminals on the mounting surface are 2.8 mm wide. ±0.05 6.8 ±0.05 1.6 (PC Board) 6.8 4.85 (0.5) 2 (0.5) (0.5) NC Terminal NO Terminal COM Terminal 5.5 Switch Switch Switch Terminal Terminal Terminal Soldered Mounting 3C 2C 1C Side Side All dimensions in mm. Replacement Parts Package Material Part No. Ordering Part No. Remarks Shape Quantity Spare Key LW9Z-SK-500 LW9Z-SK-500PN2 Standard key Metal 2 (nickel-plated brass) Specify a key number 501 to 515 in place LW9Z-SK-0 LW9Z-SK-0PN02 of 0 in the Part No. 8 +0.1 9-ø1.2 0 (0.8) (0.8) (0.8) 2.4 5 5 2.4 2.8 2.8 2.8 LW Silhouette Pushbuttons Round Pushbuttons with Round Bezel Guard Ordering Part No. Contact ➁ Button Color Shape Operation Type Contact Material Code Solder/Tab Terminal PC Board Terminal Screw Terminal Round Flush SPDT LW6GB-M1C1➁ LW6GB-M1C1V➁ — With Round Guard Gold DPDT LW6GB-M1C2➁ LW6GB-M1C2V➁ LW6GB-M1C2M➁ Black Plastic Bezel 3PDT LW6GB-M1C3 LW6GB-M1C3V — ➁ ➁ LW6GB-M1 Momentary LW6GB-A1 SPDT LW6GB-M1C5➁ — — LA: amber Silver DPDT LW6GB-M1C6➁ — LW6GB-M1C6M➁ LB: black LG: green 3PDT LW6GB-M1C7 — — ➁ LR: red SPDT LW6GB-A1C1➁ LW6GB-A1C1V➁ — LS: blue LW: white Gold DPDT LW6GB-A1C2➁ LW6GB-A1C2V➁ LW6GB-A1C2M➁ L Y: yellow 3PDT LW6GB-A1C3 LW6GB-A1C3V — ➁ ➁ Maintained SPDT LW6GB-A1C5➁ — — Silver DPDT LW6GB-A1C6➁ — LW6GB-A1C6M➁ 3PDT LW6GB-A1C7➁ — — • Lenses for illuminated pushbuttons are used for Flush Silhouette pushbuttons. Round Illuminated Pushbuttons with Round Bezel Guard Ordering Part No. Contact ➂ Operating Shape Lamp Operation Contact ➁ Color Code Material Voltage Code Solder Terminal PC Board Terminal Screw Terminal SPDT LW6GL-M1C1➂➁ LW6GL-M1C1➂V➁ — Round Flush With Round Guard DPDT LW6GL-M1C2 LW6GL-M1C2 V LW6GL-M1C2 M Gold ➂➁ ➂ ➁ ➂ ➁ Black Plastic Bezel 3PDT LW6GL-M1C3➂➁ LW6GL-M1C3➂V➁ — LW6GL-M1 Momentary LW6GL-A1 SPDT LW6GL-M1C5➂➁ — — A: amber Silver DPDT LW6GL-M1C6 — LW6GL-M1C6 M ➂➁ ➂ ➁ 2: 6V AC/DC G: green 3: 12V AC/DC 3PDT LW6GL-M1C7➂➁ — — R: red LED 4: 24V AC/DC S: blue SPDT LW6GL-A1C1➂➁ LW6GL-A1C1➂V➁ — 5: 120V AC W: white 6: 240V AC Gold DPDT LW6GL-A1C2 LW6GL-A1C2 V LW6GL-A1C2 M ➂➁ ➂ ➁ ➂ ➁ Y: yellow 3PDT LW6GL-A1C3➂➁ LW6GL-A1C3➂V➁ — Maintained SPDT LW6GL-A1C5➂➁ — — Silver DPDT LW6GL-A1C6 — LW6GL-A1C6 M ➂➁ ➂ ➁ 3PDT LW6GL-A1C7➂➁ — — Contact Ratings Specifications –25 to +60°C (no freezing) Operating Temperature Gold Contacts (switch base: blue) Illuminated units: -25 to +50°C • Maximum Voltage 250V Storage Temperature –40 to +80°C Thermal Current 3A Operating Humidity 45 to 85% RH (no condensation) Operating Voltage 30V DC 125V AC Contact Resistance 50 mΩ maximum (initial value) Operating Current Insulation Resistance 100 MΩ minimum (500V DC megger) 0.1A 0.1A (resistive load) Between live part and ground: Contact Material Gold-clad silver 2,500V AC, 1 minute Between terminals of different poles: Minimum applicable load (reference value) = 5V AC/DC, 1 mA Switch Unit Dielectric 2,500V AC, 1 minute (Applicable range is subject to the operating condition and load.) Strength Between terminals of the same poles: 1,000V AC, 1 minute Silver Contacts (switch base: gray) • Illumination Between live part and ground: Operating Voltage 30V 125V 250V Unit 2500V AC, 1 minute Resistive Load — 3A 2A Operating extremes: AC Vibration Resistance 5 to 55 Hz, amplitude 0.5 mm 50/60Hz Inductive Load — 2A 1.5A Operating 2 Damage limits: 1,000 m/s (100G) Current Resistive Load 2A 0.4A — Shock Resistance 2 Operating extremes: 100 m/s (10G) DC Inductive Load 1A 0.2A — Mechanical Life Momentary: 1,000,000 Thermal Current 5A (minimum operations) Maintained: 500,000 Momentary: 100,000 (Switching frequency Contact Material Silver Electrical Life 1,800 operations/h) AC inductive load: PF = 0.6 to 0.7 (minimum operations) Maintained: 100,000 (Switching frequency DC inductive load: L/R = 7 ms max. 900 operations/h) Degree of Protection IP65 (IEC 60529) Solder/tab terminal #110 Terminal Style PC board terminal Screw terminal 9 LOCK TOP TOP LOCK LOCK LOCK /2&. /2&. /2&. LW Silhouette Pushbuttons Round Pushbuttons with Round Bezel Guard Dimensions Bottom View Panel Thickness Terminal Cover 0.8 to 3.2 LW-VL2M Mounting Bracket Terminal Cover Locking Ring LW-VL2 M3 Screw Terminals 25 25 Rubber Gasket 25.4 26.2 54 5.4 61.9 Screw TerminalPC Board Terminal Solder/Tab Terminal 31.4 Solder/Tab Terminal PC Board Terminal Mounting Hole Layout Width 0.8 × 0.5t Width 2.8 × 0.5t 2  8.5 18.7 2 28 ¡² 60.5 9 43 4.9 5.5 43 • Mounting centers Vertical: 56.5 mm minimum Screw Terminal PC Board Terminal Solder/Tab Terminal Horizontal: 28 mm minimum Note: Determine the mounting centers Terminal Arrangement (Bottom View) to ensure ease of operation. • Solder/Tab Terminal • Screw Terminal • PC Board Terminal TOP TOP 3 2 1 Note: SPDT has C, NO, and NC only in the center. DPDT has C, NO, and NC only on the right and left. Screw terminal type is only available in DPDT configuration. Round Illuminated Pushbuttons with Round Bezel Guard Dimensions Bottom View Panel Thickness Terminal Cover Terminal Cover 0.8 to 3.2 LW-VL2 LW-VL2M Mounting Bracket M3 Screw Locking Ring Terminal     Rubber Gasket 6FUHZ7HUPLQDO 3&%RDUG7HUPLQDO 6ROGHU7DE7HUPLQDO 54 5.4 61.9 31.4 Mounting Hole Layout PC Boad Terminal Solder/Tab Terminal Width 0.8 × 0.5t Width 2.8 × 0.5t  ¡² 2 8.5 18.7 2 28 60.5 9 43 4.9 5.5 43 • Mounting centers Vertical: 56.5 mm minimum Screw TerminalPC Board Terminal Solder/Tab Terminal Horizontal: 28 mm minimum Note: Determine the mounting centers to ensure ease of operation. Terminal Arrangement (Bottom View) • Solder/Tab Terminal • Screw Terminal • PC Board Terminal TOP TOP 3 2 1 Lamp Terminal Lamp Terminal Note: SPDT has C, NO, and NC only in the center. DPDT has C, NO, and NC only on the right and left. Screw terminal type Lamp Terminal is only available in DPDT configuration. (interconnected) Lamp Terminal 10 R18 R18 5 R18 5 5 8.2 8.2 2.0 6.2 6.2 2.0 C NO NC X2 X2 X1 6.8 6.8 C NO NC 5 5 6.8 6.8 C NO NC 4.85 5 5 1.2 4.85 6.5 1.2 C NO NC C NO NC C NO NC 6 6 6 6 6.8 6.8 6.8 6.8 1.2 4.85 1.2 4.85 6.5 X2 X1 C NO NC C NO NC 40.8 40.8  23.2 14 15 14 15 16.2  ; ; ; X1 X2 X2 & 12 1& C NO NC & 12 1& C NO NC 18.2  16.2  C NO NC C NO NC LW Silhouette Switches Flush bezel projects only 2 mm from front of panel ø28 round and 28-mm square black plastic bezels. Round metallic bezels are also available. • ø25.3-mm round panel cut-out, 24.5-mm square panel cut-out. • Collective mounting is possible. • Pushbuttons, pilot lights, illuminated pushbuttons, selector switches, key selector switches, and illuminated selector switches are available. Square pushbuttons also available with switchguards. • Key selector switches with high-security lock mechanism. • Over 60 different key variations available to choose from. • Separate type control units with a locking lever enable easy installation even when mounted collectively. • Gold (gold-clad silver) or silver contacts. • Degree of protection: IP65 (IEC 60529) • UL recognized and CSA certified. EN compliant. Contact Ratings Gold Contacts (switch base: blue) Silver Contacts (switch base: gray) • • Maximum Voltage 250V Operating Voltage 30V 125V 250V Thermal Current 3A Resistive Load — 3A 2A AC 50/60Hz Operating Voltage 30V DC 125V AC Inductive Load — 2A 1.5A Operating Operating Current Current Resistive Load 2A 0.4A — 0.1A 0.1A DC (resistive load) Inductive Load 1A 0.2A — Contact Material Gold-clad silver Thermal Current 5A Minimum applicable load (reference value) = 5V AC/DC, 1 mA Contact Material Silver (Applicable range is subject to the operating condition and load.) AC inductive load: PF = 0.6 to 0.7 DC inductive load: L/R = 7 ms max. Specifications and other descriptions in this catalog are subject to change without notice. 7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, Japan Tel: +81-6-6398-2571, Fax: +81-6-6392-9731 E-mail: products@idec.co.jp IDEC CORPORATION (USA) IDEC ELEKTROTECHNIK GmbH IDEC IZUMI (H.K.) CO., LTD. 1175 Elko Drive, Sunnyvale, CA 94089-2209, USA Wendenstrasse 331, 20537 Hamburg, Germany Units 11-15, Level 27, Tower 1, Tel: +1-408-747-0550 / (800) 262-IDEC (4332) Tel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24 Millennium City 1, 388 Kwun Tong Road, Fax: +1-408-744-9055 / (800) 635-6246 E-mail: service@idec.de Kwun Tong, Kowloon, Hong Kong E-mail: opencontact@idec.com Tel: +852-2803-8989, Fax: +852-2565-0171 IDEC (SHANGHAI) CORPORATION E-mail: info@hk.idec.com IDEC CANADA LIMITED Room 608-609, 6F, Gangtai Plaza, No. 700, Yan'an East Road, Shanghai 200001, PRC 3155 Pepper Mill Court, Unit 4, Mississauga, IDEC TAIWAN CORPORATION Tel: +86-21-5353-1000, Fax: +86-21-5353-1263 Ontario, L5L 4X7, Canada 8F-1, No. 79, Hsin Tai Wu Road, Sec. 1, E-mail: idec@cn.idec.com Tel: +1-905-890-8561, Toll Free: (888) 317-4332 Hsi-Chih, Taipei County, Taiwan Fax: +1-905-890-8562 Tel: +886-2-2698-3929, Fax: +886-2-2698-3931 IDEC (BEIJING) CORPORATION E-mail: sales@ca.idec.com E-mail: service@tw.idec.com Room 211B, Tower B, The Grand Pacific Building, 8A Guanghua Road, Chaoyang District, IDEC AUSTRALIA PTY. LTD. IDEC IZUMI ASIA PTE. LTD. Beijing 100026, PRC 2/3 Macro Court, Rowville, Victoria 3178, Australia No. 31, Tannery Lane #05-01, Tel: +86-10-6581-6131, Fax: +86-10-6581-5119 Tel: +61-3-9763-3244, Toll Free: 1800-68-4332 HB Centre 2, Singapore 347788 Fax: +61-3-9763-3255 Tel: +65-6746-1155, Fax: +65-6844-5995 IDEC (SHENZHEN) CORPORATION E-mail: sales@au.idec.com E-mail: info@sg.idec.com Unit AB-3B2, Tian Xiang Building, Tian’an Cyber Park, Fu Tian District, Shenzhen, Guang Dong 518040, PRC IDEC ELECTRONICS LIMITED Tel: +86-755-8356-2977, Fax: +86-755-8356-2944 Unit 2, Beechwood, Chineham Business Park, Basingstoke, Hampshire RG24 8WA, UK Tel: +44-1256-321000, Fax: +44-1256-327755 www.idec.com E-mail: sales@uk.idec.com