PS3L Series Power Supplies PS3L Series Metal Frame Switching Power Supplies Key features of the PS3L series include: • Metal frame • Wide power range: 10W-300W • Universal input: 10W-30W: 85-264V AC/105-370V DC 50W-300W: 85-264V AC/105-350V DC • Screw terminals, IP20 (fi ngersafe) • Power Factor Protection EN61000-3-2 EN61000-3-3 (50W to 300W models) • Overcurrent/overvoltage protection • Voltage +10% adjustment • DIN rail or panel surface mount • Approvals: UL508 Listed CE marked File #E177168 UL508 listed EN50178 compliant EMC Directives EN50081-2 EN61000-6-2 LVD EN60950:2000 Rated Rated Part Rated Rated Part Item Watts Item Watts Voltage Current Number Voltage Current Number 5V DC 2A PS3L-A05AFF 12V DC 8.5A PS3L-E12AFF 12V DC 0.9A PS3L-A12AFF 10 100 24V DC 0.5A PS3L-A24AFF 24V DC 4.5A PS3L-E24AFF 5V DC 3A PS3L-B05AFF 12V DC 13A PS3L-F12AFF 15 12V DC 1.4A PS3L-B12AFF 24V DC 0.7A PS3L-B24AFF 150 24V DC 6.5A PS3L-F24AFF 5V DC 6A PS3L-C05AFF 12V DC 2.5A PS3L-C12AFF 30 24V DC 1.3A PS3L-C24AFF 300 24V DC 12.5A PS3L-G24AFF 12V DC 4.3A PS3L-D12AFF 50 24V DC 2.2A PS3L-D24AFF 118 www.idec.com Communication & Networking Sensors Power Supplies Automation Software Operator Interfaces PLCs Communication & Networking PLCs Operator Interfaces Automation Software Power Supplies Sensors PS3L Series Power Supplies Specifi cations PS3L-A PS3L-B PS3L-C PS3L-D PS3L-E PS3L-F PS3L-G24 Type (10W) (15W) (30W) (50W) (100W) (150W) (300W) Input Voltage 100 to 240V AC 100 to 240V AC (Single-phase two-wire) (Voltage range: 85 to 264V AC/105 to 370V DC) (Voltage range: 85 to 264V AC/105 to 350V DC) Frequency (AC input only) 47 to 63Hz 100V 0.25A 0.37A 0.68A 0.68A 1.4A 2.0A 3.8A Input Current (Typical) 200V 0.16A 0.23A 0.45A 0.34A 0.65A 0.95A 2.0A 100V 20A max. 20A max. 20A max. 30A max. 30A max. 30A max. 30A max. Inrush Current (Cold start) 200V 40A max. 40A max. 40A max. 60A max. 60A max. 60A max. 60A max. Leakage Current 0.75 mA max. (60Hz; UL, CSA, VDE) Power Factor (Typical) — 0.99 (100V AC input, rated output), 0.95 (200V AC, rated output) 5V DC: 70% 5V DC: 73% 5V DC: 75% — — — — Effi ciency (Typical) 12V DC: 74% 12V DC: 75% 12V DC: 77% 12V DC: 76% 12V DC: 78% 12V DC: 80% — 24V DC: 78% 24V DC: 78% 24V DC: 79% 24V DC: 79% 24V DC: 81% 24V DC: 83% 24V DC: 81% 5V/2A 5V/3A 5V/6A — — — — Rated Voltage/Current 12V/0.9A 12V/1.4A 12V/2.5A 12V/4.3A 12V/8.5A 12V/13A — 24V/0.5A 24V/0.7A 24V/1.3A 24V/2.2A 24V/4.5A 24V/6.5A 24V/12.5A Adjustable Voltage Range ±10% (V.ADJ control on front) Output Holding Time 20msec minimum (at the rated input and output) Start Time 200msec maximum (at the rated input and output) 500msec maximum (at the rated input and output) Rise Time 100msec maximum (at the rated input and output) 200msec maximum (at the rated input and output) Input Fluctuation 5V: 20mV maximum, 12V: 48mV maximum, 24V: 96mV maximum Load Fluctuation 5V: 40mV maximum, 12V: 100mV maximum, 24V: 150mV maximum 5V 50mV maximum 5V: 60mV maximum Temperature Change 12V: 120mV maximum 12V: 150mV maximum (–10 to +50°C) 24V: 240mV maximum 24V: 290mV maximum 1 1 –10 to 0°C 5V: 160mV maximum, 12V/24V: 180mV maximum 200 mV maximum Ripple Voltage 1 0 to +50°C 5V: 120mV maximum, 12V/24V: 150mV maximum 2 Overcurrent Protection 105% (Typical), Automatic reset 3 4 Overvoltage Protection 120% min. Output off at 120%, reset when input voltage is restored. Operation Indicator LED (green) Between input and output terminals: 3,000V AC, 1 minute Dielectric Strength Between input terminal and housing: 2,000V AC, 1 minute Between output terminal and housing: 500V AC, 1 minute Between input and output terminals: 100MW minimum (500V DC megger) Insulation Resistance Between input terminal and housing: 100MW minimum (500V DC megger) 5 Operating Temperature –10˚ to +70°C –10˚ to +60°C –10˚ to +65°C Storage Temperature –30° to +75°C Operating Humidity 20 to 90% RH (no condensation, no freezing) 2 Vibration Resistance 10 to 55Hz, 20m/s constant, sweep cycle 1 minute, 2 hours each in 3 axes 2 Shock Resistance 200m/s , 11ms, 1 shock each in 3 axes Dimensions H X W X D (mm) 97 x 35 x 86 97 x 35 x 86 96 x 35 x 114.5 97 x 37 x 147.5 97 x 54 x 200 97 x 62 x 200 158 x 63 x 230 Weight (Approx.) 240g 250g 340g 350g 630g 730g 1550g Terminal Screw M4 slotted-Phillips head screw (screw terminal type) 1. Including noise. Measured at the terminal block according to EIAJ. 2. Protection against short-circuit and overcurrent of 30 seconds maximum. Overload for 30 seconds or longer may damage the internal elements. 3. Zener limiter method 4. Turn the input off and after one minute, turn the input on again. 5. Refer to the derating characteristics. No freezing. The maximum temperature is the temperature at 100% output current (natural air-cooling) in the derating characteristics. USA: 800-262-IDEC Canada: 888-317-IDEC 119 Supplementary Output Input Functions Regulation PS3L Series Power Supplies Characteristics Operating Temperature vs. Output Current Characteristics (Derating Curves) PS3L-A/B/C/D PS3L-E/F 100 100 90 1 90 80 2 80 70 70 60 60 1 50 50 40 40 30 30 20 20 10 10 -10 30 40 50 55 60 70 Natural air-cooling -10 30 40 50 60 70 Natural air-cooling 50 60 65 70 80 Forced air-cooling 50 60 70 80 Forced air-cooling (0.5 m/sec) (0.5 m/sec) Operating Temperature (°C) Operating Temperature (°C) Conditions: At rated input/output (operating temperature is the temperature Conditions: At rated input/output (operating temperature is the temperature around the power supply) around the power supply) Mounting Direction A 1 Mounting Directions A and B 1 2 Mounting Direction B PS3L-G 100 1 90 (88) 80 70 2 60 50 40 30 A B 20 Mounting Direction 10 -10 20 30 35 40 45 50 55 60 65 70 Natural air-cooling 40 45 50 55 60 65 70 75 80 Forced air-cooling (0.5 m/sec) Operating Temperature (°C) Conditions: At rated input/output (operating temperature is the temperature around the power supply) Mounting Direction A 1 2 Mounting Direction B Overcurrent Protection Characteristics PS3L-C/D/E/F/G PS3L-A/B 100 100 50 50 0 0 100 120 100 150 Output Current (%) Output Current (%) 120 www.idec.com Communication & Networking Sensors Power Supplies Automation Software Operator Interfaces PLCs Output Current (%) Output Current (%) Output Voltage (%) Output Current (%) Output Voltage (%) Communication & Networking PLCs Operator Interfaces Automation Software Power Supplies Sensors PS3L Series Power Supplies Terminal Markings PS3L-A/B PS3L-C/D LED LED V.ADJ V.ADJ +V +V -V -V AC(L) AC(L) AC(N) AC(N) PS3L-E/F PS3L-G LED V.ADJ +V LED V.ADJ -V +V AC(L) AC(N) -V AC(L) AC(N) Marking Name Description Allows adjustment within ±10%. Turning clockwise increases the V.ADJ Output Voltage Adjustment output voltage. LED Operation Indicator (Green) Lights when the output voltage is on. +V +V: Positive output terminal DC Output Terminals –V –V: Negative output terminal Grounding the terminal reduces high-frequency currents caused by Ground Terminal switching. Accepts a wide range of voltage and frequency. AC Input Terminal Polarity is irrelevant when using a DC input. USA: 800-262-IDEC Canada: 888-317-IDEC 121 PS3L Series Power Supplies Accessories Mounting Bracket (Optional) Model Mounting Plate L-shaped Bracket (wide) L-shaped Bracket (narrow) Dimensions PS3L-A/B PS9Z-3E1BPS9Z-3E2BPS9Z-3E3B PS3L-C PS9Z-3E1C PS9Z-3E2C PS9Z-3E3C PS3L-D PS9Z-3E1D PS9Z-3E2D PS9Z-3E3D See page 124 PS3L-E PS9Z-3L1F PS9Z-3E2E PS9Z-3E3E PS3L-F PS9Z-3L1F PS9Z-3E2F PS9Z-3E3F PS3L-G PS9Z-3L1G — — DIN-Rail Mounting Bracket (Optional) Model Part Number PS3L-A PS3L-B PS9Z-3E4C PS3L-C PS3L-D PS9Z-3E4D PS3L-E PS9Z-3E4F PS3L-F DIN-rail mounting brackets are ordered separately from switching power supplies. DIN-Rail Mounting Bracket Dimensions Part Number Model L1 (mm) L2 (mm) L3 (mm) H1 (mm) H2 (mm) PS3L-A 117 35 5.2 20.8 PS9Z-3E4C PS3L-B 134 PS3L-C 156 35 5.2 20.8 PS9Z-3E4D PS3L-D 186 178.8 39.5 5.2 20.8 35 L1 PS3L-E L2 PS9Z-3E4F 216.8 230.8 65 11.2 20 PS3L-F DIN Rail (Optional) Part Number Length Material BNDN10001000 mmAluminum Length in Inches (mm) F A 1.4” (35mm) B 1.14” (29mm) G C 0.78” (23mm) H A B K D C D 1.2” (31mm) F 0.11” (3mm) G 2” (51mm) H H 0.47” (12mm) Overall length 39.4" (1000mm) K 0.16” (4mm) End Clip (Optional) Item Package No. DIN Rail End Clip BNL5 9mm wide 122 www.idec.com Communication & Networking Sensors Power Supplies Automation Software Operator Interfaces PLCs H2 35 H1 97 Communication & Networking PLCs Operator Interfaces Automation Software Power Supplies Sensors PS3L Series Power Supplies Dimensions (tolerance ±1mm) PS3L-A/B (10/15W) PS3L-C (30W) LED LED Height 97.0mm Height 96.0mm V.ADJ V.ADJ 2-M3 (Depth: 6 mm max.) 2-M3 (Depth: 6 mm max.) Width 35.0mm Width 35.0mm Depth 86.0mm Depth 114.5mm 40 50±0.5 16 45±0.5 114.5 86 2-M3 (Depth: 6 mm max.) 2-M3 (Depth: 6 mm max.) 7 74±0.5 18.5 83±0.5 PS3L-D (50W) PS3L-E (100W) LED LED V.ADJ Height 97.0mm Height 97.0mm V.ADJ 3-M3 (Depth: 6 mm max.) Width 37.0mm Width 54.0mm Depth 147.5mm Depth 200.0mm 200 5-M4 (Depth: 6 mm max.) 29.5 112±0.5 147.5 3-M3 (Depth: 6 mm max.) ±0.5 29.5 127±0.5 12.5 127±0.5 PS3L-F (150W) PS3L-G (300W) LED V.ADJ LED V.ADJ Height 97.0mm Height 158.0mm Width 62.0mm Width 63.0mm Depth 200.0mm Depth 230.0mm 200 5-M4 (Depth: 6 mm max.) 230 4-M4 (Depth: 6 mm max.) 29.5 ±0.5 6.5 200±0.5 USA: 800-262-IDEC Canada: 888-317-IDEC 123 17.5 85±0.5 6 35 97 20±0.5 46±0.5 21.5 17 63±0.5 25±0.5 97 37 97 32 62 17.5 5.5 55±0.5 35 96 25±0.5 97 27 54 24 25±0.5 158 63 PS3L Series Power Supplies Mounting Bracket Dimensions (PS9Z-3E1/PS9Z-3E2/PS9Z-3E3/PS9Z-3L) Mounting Plate L-shaped Bracket (wide) L-shaped Bracket (narrow) PS9Z-3E1B/3E1C PS9Z-3E2B/3E2C PS9Z-3E3B/3E3C (For 10W/15W/30W Types) (For 10W/15W/30W Types) (For 10W/15W/30W Types) c l 2-ø3.5 Holes 2-ş3.5 Holes 2-ø3.5 Holes ab ø3.5 Holes 2-M3 Countersunk a b L 3.5 × 4.5 L ba Hole∗ L l d 2-ş3.5 Holes dl Dimensions (mm) Part Number Dimensions (mm) WL l a b c d e Part Dimensions (mm) Number Part Number W L l abc d PS9Z-3E1B 35 101 94 74 14.5 3.5 17.5 30 W L l abc d PS9Z-3E2B 36 95.5 80.5 74 9.5 18.5 7.5 PS9Z-3E1C 33 138.5 128.5 83 32 5 17.5 26 PS9Z-3E3B 31 103 22.5 74 18 13.5 4.5 PS9Z-3E2C 38 118.5 104 83 15 20.5 7.5 PS9Z-3E3C 33 126 25 83 21 15.5 4 PS9Z-3E1D PS9Z-3E2D PS9Z-3E3D (For 50W Type) (For 50W Type) (For 50W Type) 150 3-ø3.5 Holes 4-ø4.5 Holes 127 9.5 2-ø4.5 Holes 3-M3 Countersunk 3-ø3.5 Holes 127 18 7.5 15 157.5 28 24 127 5 160 170 2-ø4.5 Holes 15 120 10 PS9Z-3L1F PS9Z-3E2E/3E2F PS9Z-3E3E/3E3F (For 100W/150W Types) (For 100W/150W Types) (For 100W/150W Types) 2-ø4.5 Holes 3-ø8.5 x 90° Countersunk 3-ø4.5 Holes 4-ø5.5 Holes 200 127 46 ±0.2 44.5 127 127 53.5 10 20 ±0.2 3-ş4.5 Holes 5 220 207.5 37.5 230 2-ş4.5 Holes 25 150 10 Dimensions (mm) PS9Z-3L1G Part Number Wl a b (For 300W Type) Dimensions (mm) 3-ø8.5 x 90° Part Number PS9Z-3E3E 54 32.5 27 12.5 2-ø4.5 Holes Countersunk Wa PS9Z-3E3F 65 40 32.5 20 PS9Z-3E2E 59 34.5 PS9Z-3E2F 70 40 ±0.2 21.5 200 ±0.2 5 250 260 Mounting Hole Layout 2-M3 Mounting Hole Layout Mounting Hole Layout  ∗1 2-M3 2-M3 PS9Z-3E3B: 22.5 PS9Z-3E3C: 25 ∗1 ∗1 ∗1 ∗1 ∗1 ∗2 4-M4  ∗2 ∗3 PS9Z-3E2B: 80.5 PS9Z-3E1B:  94 12.5 PS9Z-3E3D:  20 15 PS9Z-3E2C: 104 PS9Z-3E1C: 128.5 8.5 PS9Z-3E3E:  32.5 20 PS9Z-3E2D: 120 PS9Z-3E1D: 160 12.5 PS9Z-3E3F:  40 20 PS9Z-3E2E: 150 PS9Z-3L1F:220 5 ∗2 PS9Z-3E2F : 150 PS9Z-3L1G: 250 3.5 124 www.idec.com 2-C2 Communication & Networking Sensors Power Supplies Automation Software Operator Interfaces PLCs 35 2 36 29.5 2 W 2 2 18 e d ∗2 31 31.5 ±0.2 ±0.2 25 24 25 17 60 63 20 34.5 20 20 15 W 29 10 10 8 c 25 2 20 a 2.3 2.3 W 44.5 10 10 15.5 2.3 W a c 17.5 ∗3 25 2 20 2 W 34.5 28 17.5 6.5 b 10 l 20 Communication & Networking PLCs Operator Interfaces Automation Software Power Supplies Sensors B 3-M4 (Depth: 6 mm max.) A 2-M4 (Depth: 6 mm max.) PS3L Series Power Supplies Direct Mount Installation PS3L-A/B PS3L-C PS3L-D A 2-M3 (Depth: 6 mm max.) A 2-M3 (Depth: 6 mm max.) A 3-M3 (Depth: 6 mm max.) B 2-M3 (Depth: 6 mm max.) B 2-M3 (Depth: 6 mm max.) B 3-M3 (Depth: 6 mm max.) PS3L-E/F PS3L-G A 4-M4 (Depth: 6 mm max.) B 4-M4 (Depth: 6 mm max.) The fi gures above show the frames only. PC board and parts are omitted for illustration purposes. Mounting screws NOT supplied with power supplies. Mounting Hole Layout Installation PS3L-A/B PS3L-C PS3L-D PS3L-E/F PS3L-G 2-ø4 Holes 2-ø4 Holes 4-ø5 Holes 2-ş5 Holes 3-ø4 Holes A Side Mounting (screw from the back) 127 112 207 50 45 4-ø5 Holes 2-ø4 Holes 3-ø5 Holes 2-ø4 Holes 3-ø4 Holes B Side Mounting (screw from the back) 83 74 127 127 (or 100) 200 USA: 800-262-IDEC Canada: 888-317-IDEC 125 85 55 29 20 63 25 18.5 125 25 106 PS3L Series Power Supplies Instructions Notes for Installation Overcurrent Protection Notes for Operation 1. PS3L switching power supplies can be installed The output voltage drops automatically when an 1. Output interruption may indicate blown fuses. in either (A) or (B) directions as shown below. overcurrent fl ows due to an overload or short circuit. 2. The internal fuse inside the power supply is for For PS3L-E/F/G types, the operating temperature Normal voltage is automatically restored when the AC input. When using with DC input, install an vs. output current characteristics vary with the load returns to normal conditions. external fuse for DC input. mounting direction. See the derating curves 120. To avoid blown fuses, select fuses in consider- ation of the rated current of internal fuses. Overvoltage Protection (PS3L-A) Rated Current of Internal Fuses The PS3L-A uses a Zener diode for overvoltage protection. Do not apply an external overvoltage to Part Number Rated Fuse Current the output terminal. (A)(B) PS3L-A 2A PS3L-B 2. Mount the switching power supply on a metallic (PS3L-B/C/D/E/F/G) surface that provides adequate heat dissipation. 3.15A The output is turned off by overvoltage protection PS3L-C Be sure to prevent heat build-up around power when an overvoltage is applied. When the output PS3L-D 2A supplies. voltage has dropped due to an overvoltage (120% or PS3L-E more), turn the input off, and after one minute, turn 4A the input on again. PS3L-F PS3L-G 6.3A Series Operation The following series operations are allowed. 3. Avoid overload and short-circuit for a long period + of time, otherwise the internal elements may be AC IN OUT Load damaged. - 20 mm minimum A 4. Not suitable for parallel operation. + Load 3. Maintain 20 mm clearance between the power IN OUT 5. DC input operation is not subject to safety - supplies. standards. 4. Use mounting screws of a proper length so that + AC IN OUT D screws do not penetrate into the housing of the - Insulation/Dielectric Test Load B switching power supply 6 mm or more. + When conducting an insulation/dielectric test, IN OUT D 5. Mounting screws cannot be fastened on a PC - short-circuit the input (between AC) and output board. Be sure to fasten the screws on the chas- For series operation (B), insert Schottky diodes D (between + and –). Do not apply or interrupt the volt- sis side. as shown in the fi gure. Select a Schottky diode in age suddenly, otherwise the surge voltage may be consideration of the rated current. generated and the power supply may be damaged. Adjustment of Output Voltage The output voltage can be adjusted within ±10% of the rated output voltage by using the V.ADJ control on the front. Turning the V.ADJ clockwise increases the output voltage. When using a higher output voltage, reduce the output current to make sure that the output capacity is within the rating. Note that overvoltage protection may work when increasing the output voltage. Safety Precautions • Do not use switching power supplies with electric equipment whose malfunc- • Operating temperatures should not exceed the ratings. Be sure to note the tion or inadvertent operation may damage the human body or life directly. derating characteristics. If the operating temperature exceeds the ratings, electric shock, fi re, or malfunction may occur. • Make sure that the input voltage and output current do not exceed the ratings. If the input voltage and output current exceed the ratings, electric shock, fi re, • Blown fuses indicate that the internal circuits are damaged. Do not just or malfunction may occur. replace the fuse and reoperate, otherwise electric shock, fi re, or malfunction may occur. • Do not disassemble, repair, or modify the power supplies. • Do not use the switching power supplies to charge rechargeable • Do not touch the switching power supplies while input voltage is applied, batteries. otherwise electric shock may occur. • Provide the fi nal product with protection against malfunction or damage that may be caused by the malfunction of switching power supplies. 126 www.idec.com Communication & Networking Sensors Power Supplies Automation Software Operator Interfaces PLCs