COMPACT 50x50 mm COLOUR SENSORS • 3 channel colour sensor with C or C+I functions and 10 tolerance levels  Wide spectrum white light LED emission and RGB photoreceiver  3 independent NPN or PNP outputs and RS485 serial interface  2 push-button easy setting and 4 digit display S65-V SERIES The S65-V colour sensors offer the best performances for colour detection in a standard 50x50x25 mm compact housing. The S65-V0 model, thanks to a good response time of only 340 µs, results to be particularly suitable for automatic packaging applications where high speed and colour mark detection are necessary. The S65-V1 model increases the chromatic sensitivity of S65-V0 towards dark colours, allowing to distinguish even slight tone differences, useful in quality control and part checking, at inferior process speed. The sensors can memorise and recognise 3 colours on 3 independent channels. The C (chromaticity) or C+I (chromaticity and intensity) detection algorithm and the tolerance level can be chosen for each colour. The 0 - 40 ms delay programming is the same for each channel. The auxiliary functions include keylock and synchronisation with external events through a specific input. The control panel presents two setting push-buttons, outputs LEDs and a 4-digit display for functioning messages and sensor configuration. Complete remote control is possible for the version with the RS485 serial interface, which in the S65-V1 sensor can also receive RGB chromatic information. COLOUR SENSORS COLOUR SENSORS V The colour sensor can be DIMENSIONS configured in a 'C’ or 'C+I' detection mode. The 'C' type algorithm is used to obtain a larger depth of field, or to detect colours on different opaque, shiny or reflecting surfaces. The 'C+I' type algorithm offers a higher sensitivity towards tone variations, A and is recommended for the detection of different colours on the same type of material. It will also distinguish grey tones. F F 11.5 M12 Ø15 mm Output ‘OR’ function LED A INDICATORS AND SETTINGS Output status LEDs B B C 4 digit display C A SET push-button D SEL push-button E D E M12 connector output, F orientable on two positions ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue. Refer also to Connectors (A.03) and Fixing Brackets (A.04) of the General Catalogue. S65-PA-5 OUTPUT 3 (GREY) Rx/Tx+ OUTPUT 2 (PINK) (YELLOW) OUTPUT 1 0V (GREEN) (BLUE) Rx/Tx- 10 ... 30 Vdc (WHITE) (BROWN) SYNC (RED) Versions and options: refer to MODEL SELECTION TABLE 20 mm SELECTION TABLE TECHNICAL DATA colour sensors S65-PA-5-V09-NNN 956251030 NPN S65-PA-5-V09-NNNZ 956251010 NPN RS485 S65-PA-5-V09-PPP 956251020 PNP S65-PA-5-V09-PPPZ 956251000 PNP RS485 S65-PA-5-V19-NNN 956251110 NPN S65-PA-5-V19-NNNZ 956251090 NPN RS485 Operating distance: 5 ... 45 mm * S65-PA-5-V19-PPP 956251100 PNP 1 Power supply: 10 ... 30 Vdc S65-PA-5-V19-PPPZ 956251080 PNP RS485 Ripple: 2 Vpp Consumption: 60 mA at 24 V 2 Light emission: white LED 400 -700 nm Spot dimension: approx. 4 mm at 20 mm Setting: SET push-button SEL push-button Indicators: 4 digit display green active OUTPUT LEDs yellow ‘OR’ function OUTPUT LED Output type: PNP - NO NPN - NO Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 335 µs 1 ms (FAST); 5 ms (NORM) Switching frequency: 1.5 kHz 500 Hz (FAST); 100 Hz (NORM) Operating mode: C or C+I independent for each channel Tolerance level: selectable from TOL0 to TOL9 Timing function: selectable between 5, 10, 20, 30 and 40 ms Auxiliary functions: ext. synchronism 3 keylock RS485 serial interface 4 Connection: M12 8-pole connector TECHNICAL NOTES Electrical protection: class 2 Mechanical protection: IP67 1 Limit values 5 Protection devices: A, B 2 Average life of 100.000 h with T = +25 °C A Housing material: ABS 3 Is activated with SYNC connected to +V at Lens material: glass Weight: 100 g max. powering Operating temperature: -10 ... +55°C 4 Connector can be blocked on two positions Storage temperature: -25 ... +70°C 5 A - reverse polarity protection Reference standard: EN 60947-5-2 B - overload and short-circuit protection * refer to detection diagrams DETECTION DIAGRAMS White White Light yellow Light yellow Dark blue Dark blue Black Black Operating distance Operating distance S65-V0: operating distance according to S65-V1: operating distance according to target reflectivity degree target reflectivity degree Target reflectivity % S65-PA-5-V09-NNN S65-PA-5-V09-NNNZ S65-PA-5-V09-PPP Target reflectivity % S65-PA-5-V09-PPPZ S65-PA-5-V19-NNN S65-PA-5-V19-NNNZ S65-PA-5-V19-PPP S65-PA-5-V19-PPPZ MODEL SELECTION AND ORDER INFORMATION MODEL FUNCTION CONNECTION OUTPUT RS485 ORDER N° S65-PA-5-V09-NNN colour sensor M12 connector NPN 956251030 S65-PA-5-V09-NNNZ colour sensor M12 connector NPN • 956251010 S65-PA-5-V09-PPP colour sensor M12 connector PNP 956251020 S65-PA-5-V09-PPPZ colour sensor M12 connector PNP • 956251000 S65-PA-5-V19-NNN colour sensor M12 connector NPN 956251110 S65-PA-5-V19-NNNZ colour sensor M12 connector NPN • 956251090 S65-PA-5-V19-PPP colour sensor M12 connector PNP 956251100 S65-PA-5-V19-PPPZ colour sensor M12 connector PNP • 956251080 ACCESSORIES DIMENSIONS ST-5020 ST-5021 4.5 2 Ø 4.1 26.5 Ø 4.4 9 30° 20 Ø 4.3 10 Ø 5.1 Ø 4.4 Ø 4.1 Ø 4.3 20 ° Ø 4.1 Ø 4.4 Ø 4.3 Ø 5.3 Ø 4.4 10° 30° 28 35° 16.5 ACCESSORY SELECTION AND ORDER INFORMATION MODEL DESCRIPTION N°ORDER ST-5020 fixing bracket 50 x 27 x 20 mm 95ACC5330 ST-5021 fixing bracket 20 x 40 x 28 mm 95ACC5340 Refer also to Accessories for Sensors of the General Catalogue CS-A1-06-B-03 M12 8-pole conn. with 3 m unshielded cable 95ACC2230 CS-A1-06-B-05 M12 8-pole conn. with 5 m unshielded cable 95ACC2240 CS-A1-06-B-10 M12 8-pole conn. with 10 m unshielded cable 95ACC2250 UNI EN ISO9001 UNI EN ISO14000 Distributed by: HEADQUARTERS DATASENSOR SpA via Lavino, 265 - 40050 Monte San Pietro, BO - Italy Tel. +39 051/6765611 • Fax +39 051/6759324 www.datasensor.com • e-mail info@datasensor.com Datasensor SpA endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. For correct installation and use Datasensor SpA can guarantee only the data indicated in the instruction manual supplied with the products. 2 8 20 50 5 21 2 30° 12 19 28 40 2 Printed in Italy in July 2005 Rev. 04 COLOUR SENSORS