FIBRE OPTIC SENSOR FOR DIN RAIL MOUNTING 10 bit resolution models with 500 µs response for high operating distances • 12 bit resolution models with 50 µs response and 4 digit display for high speed • Cost-effective models with multiturn trimmer adjustment • TM EASYtouch push-button setting with remote control, keylock and output delay • TM Ultra-thin housing with CLEARLOCK patented fibre fixing system • S7 SERIES st the 1 in Europe The S7 series is the first fibre optic amplifier to be manufactured in Europe that is equipped with a full 4 digit display, confirming Datasensor's technological leadership. With its slim 10mm body width, the S7 represents the ideal solution for all applications requiring high accuracy sensing combined with very compact dimensions. The high resolution 12 bit amplifier has a response time of 50 µs for a switching frequency of 10 Khz; 4096 resolution steps make the S7 series perfect for ultra high precision detection of small objects and low colour contrasts. This is made easier by the integral 4 digit display, which clearly indicates the received signal, selected time delay and the adjustable set point values. Moreover, the white light LED emission possibility enhances the contrast detection. Installing and setting the S7 is easy and rapid, thanks to the patent-covered CLEARLOCK fibre fixing and EASYtouch adjustment system that offers remote setting, keylock and activation of the output OFF delay function. Furthermore new versions of the S7 series are available with multiturn mechanical trimmer threshold adjustment for cost-oriented applications. FIBRE OPTIC SENSORS FIBRE-OPTIC SENSORS S7 The ultra-thin housing is specifically DIMENSIONS designed for side-by-side mounting on DIN rail where space is limited or mounting through two M3 clearance holes onto the side of a machine. TM The CLEARLOCK fibre-optic fixing system assists reliable insertion of standard and high performance 2.2mm Ø fibre-optics. The TM EASYtouch one touch setting procedure automatically selects the best detection conditions. For critical applications a two touch setting is provided for fine tuning. S7 benefits from remote teach, keypad lock and delay off timing functions. For further information on our extensive range accessories please D see our OF and OFA fibre optic J C I datasheet. OUTPUT status and A INDICATORS AND SETTINGS READY/ERROR LEDs Teach-in push-button B A C M8 connector output Cable output D I B 4 digit display F E E G STATUS signalling F LEDs H I A OUTPUT status LED G ‘+’ e ‘-’ buttons H J (ADJUST/MENU) I Fibre lock/unlock button Teach-in button for setting. EASYtouch™ provides two setting modes: standard or fine. CLEARLOCK Multiturn trimmer J Please refer to instructions manual for operating details ACCESSORIES CONNECTIONS For dedicated accessories refer to the ACCESSORIES section of this catalogue Refer also to Fibre-Optics, Connectors and Fixing brackets of the General Catalogue * NO OUTPUT NO OUTPUT * * NC OUTPUT for S7-7/8 models M8x1 25/50/75/100/300 mm TECHNICAL DATA SELECTION TABLE fibre-optic sensor with display - 2 m cable S7-1-E-N 950551080 NPN S7-1-E-P 950551090 PNP S7-2-E-N 950551000 NPN S7-2-E-P 950551010 PNP Proximity operating distance: fibre-optic sensor without display - 2 m cable 0 ... 100 mm (normal mode) S7-3-E-N 950551040 NPN 0 ... 50 mm (fast mode) S7-3-E-P 950551050 PNP 0 ... 25 mm (fast and normal mode) Through beam operating distance: fibre-optic sensor with display - M8 connector 0 ... 300 mm (normal mode) S7-4-E-N 950551100 NPN 0 ... 150 mm (fast mode) S7-4-E-P 950551110 PNP 0 ... 75 mm (fast and normal mode) S7-5-E-N 950551020 NPN 1 Power supply: 12 ... 24 Vdc ± 10 % S7-5-E-P 950551030 PNP Consumption: ≤ 50 mA 2 Light emission : red LED 670 nm fibre-optic sensor without display - M8 connector white LED 460 ... 630 nm S7-6-E-N 950551060 NPN Setting: teach-in SET button S7-6-E-P 950551070 PNP 3 remote via cable ‘+’ e ‘-’ buttons (ADJUST/MENU) fibre optic sensor with trimmer - 2 m cable 12-turn trimmer S7-7-E-P 950551120 PNP Digital setting : EASYtouch™ or fine S7-7-E-N 950551130 NPN Digital resolution: 12 bit (4096 points) 10 bit (1024 points) fibre optic sensor with trimmer - M8 connector Indicators: yellow OUTPUT LED S7-8-E-P 950551140 PNP green / red READY / ERROR LED S7-8-E-N 950551150 NPN 4 digit display, status bar Output type: PNP, NO (see table) NPN, NO (see table) Output current: ≤ 100 mA Saturation voltage: ≤ 2 V Response time: 500 µs (normal mode) 100 µs (fast mode) 50 µs (fast mode) Switching frequency (max.): 1 kHz (normal mode) 5 kHz (fast mode) 10 kHz (fast mode) Operating mode: light with EASYtouch™or trimmer automatic dark / light with fine acq. Timing function: 20 ms minimum output ON II3D 4 Auxiliary functions: remote keylock 5 Connection: 2 m Ø 4 mm cable M8 4-pole connector TECHNICAL NOTES Electrical protection: class 2 Mechanical protection: IP50 1 Limit values IP65 2 6 Average life of 100.000 h with T = +25 °C Electrical protection device: A, B A Housing material: ABS 3 Connect to 0 V when remote wire not used Weight: 30 g max. 4 Active with remote at +V at power on 115 g max. 2 5 PVC, 4 x 0.14 mm Functioning temp.: -10 ... +55°C Storage temp.: -10 ... +70°C 6 A - reverse polarity protection Reference standard: EN 60947-5-2 B - overload and short circuit protection DETECTION DIAGRAMS S7-2/3/5/6/7/8 10 30 Normal mode White 90% S7-2/5 5 15 Fast mode S7-1/4 7.5 2.5 Fast / norm. mode 20 25 30 (cm) 5 10 15 Grey 18% Proximity operating distance Through beam operating distance S7-2/5 proximity - Fast mode * S7-2/5 through beam - Fast mode * Standard fibre-optics: OF-42-ST-20 proximity / OF-43-ST-20 through beam Grey 18% High efficiency fibre-optics or accessory lenses can White 90% be used to obtain larger operating distances. Refer to Fibre-optics (A.02) of the General Catalogue Note: the detection diagrams of the S7-1/4 models in normal and fast mode, corresponds to the values of the S7-2/5 models in fast mode, but with half the S 7-2/3/5/6/7/8 proximity - Normal mode * S 7-2/3/5/6/7/8 th. beam - Normal mode* operating distance * standard fibre-optics S7-1-E S7-2-E S7-3-E S7-4-E S7-5-E S7-6-E S7-7-E S7-8-E MODEL SELECTION AND ORDER INFORMATION MODEL CONNECTION OUTPUT DISPLAY SETTING EMISSION CODE N° S7-1-E-N 4-pole cable NPN yes push-button white LED 950551080 S7-1-E-P 4-pole cable PNP yes push-button white LED 950551090 S7-2-E-N 4-pole cable NPN yes push-button red LED 950551000 S7-2-E-P 4-pole cable PNP yes push-button red LED 950551010 S7-3-E-N 4-pole cable NPN no push-button red LED 950551040 S7-3-E-P 4-pole cable PNP no push-button red LED 950551050 S7-4-E-N M8 4-pole connector NPN yes push-button white LED 950551100 S7-4-E-P M8 4-pole connector PNP yes push-button white LED 950551110 S7-5-E-N M8 4-pole connector NPN yes push-button red LED 950551020 S7-5-E-P M8 4-pole connector PNP yes push-button red LED 950551030 S7-6-E-N M8 4-pole connector NPN no push-button red LED 950551060 S7-6-E-P M8 4-pole connector PNP no push-button red LED 950551070 S7-7-E-P 4-pole cable PNP no trimmer red LED 950551120 S7-7-E-N 4-pole cable NPN no trimmer red LED 950551130 S7-8-E-P M8 4-pole connector PNP no trimmer red LED 950551140 S7-8-E-N M8 4-pole connector NPN no trimmer red LED 950551150 ACCESSORIES ST-505 CRD-5000 ACCESSORY SELECTION AND ORDER INFORMATION MODEL DESCRIPTION CODE N° ST-505 1 pc ‘L’- shaped fixing support 95ACC1300 CRD-5000 1 pc fixing support on DIN rail 95ACC1290 Refer also to Accessories for Sensors of the General Catalogue UNI EN ISO9001 UNI EN ISO14000 Distributed by: HEADQUARTERS DATASENSOR SpA via Lavino, 265 - 40050 Monte San Pietro, BO - Italy Tel. +39 051/6765611 • Fax +39 051/6759324 www.datasensor.com • e-mail info@datasensor.com Datasensor SpA endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. For correct installation and use Datasensor SpA can guarantee only the data indicated in the instruction manual supplied with the products. Printed in Italy in November 2005 Rev. 04 FIBRE OPTIC SENSORS