Rotary coded switches BCD (10 position) and Hexadecimal (16 position), real Principal Electrical and Performance Data and complementary codes. at 20˚C ± 5˚C, 75% RH and initial values unless otherwise stated Fully sealed and suitable for flow soldering and Contact Ratings (Max): solvent cleaning, these switches have a black (a) 30V switched, 100Vrms non switching. polyamide casing (UL94 rated) and bold white (b) 125mA switched or carried at 85˚C max. characters. Contact Resistance: (100% checked): 100mΩ max. measured at 10mVdc/10mA max., initial value and after:- choice of low profile screwdriver-operated, knurled (a) 20,000 detent steps at rated current. knob or large easy-to-operate colour coded knobs. (b) Storage for 240 hours at 85˚C carrying rated current. Gold plated wiping contacts for reliable low level Contact Life: Reliability (16 position switches): An analysis of nearly 4,000,000 dry circuit contact closures monitored (after switching. closure) at 10mVdc/10mA max. disclosed: (a) > 99.998% of results < 100mΩ. If you have a volume requirement for a (b) No contact resistance > 20Ω. product variant not shown on this sheet Insulation Resistance: (100% checked): 1,000 MΩ min. at please contact us. 240Vdc (1 minute) initial and after:- (a) 10 days exposure to 90-95% RH at 40˚C. (b) 1,000 complete rotations of 16 detents. Dielectric Strength: 1 minute: 250Vrms Inter Contact Capacitance: 5pf max. at 1MHz. Environmental Temperature Category: -55˚C to +85˚C. Climate Category: 55/85/10 storage and use. Vibration: Shock 10-200Hz 1.52mm or 15g, 50g, 11ms. Please note: BS 2011 is now superseded by BS EN 60068. Rotary coded switches Flat Type (Screwdriver operation) 10 position BCD ERG 10-112 Real code ERG 10-122 Complement code 16 position HEX ERG 16-112 Real code ERG 16-122 Complement code Mass 0.8g max. Operating force at rotor centre 300g cm max. Large Knob Style C2 C1 10 position BCD ERG 10-412/2 (red knob) Real code ERG 10-412/5 (green knob) Real code ERG 10-412/6 (blue knob) Real code 4.0 ERG 10-422/2 (red knob) Complement code 0.5 10 step 16 step 3.5 11.0 TOP VIEW TOP VIEW ERG 10-422/5 (green knob) Complement code C8 | C4 ERG 10-422/6 (blue knob) Complement code COMMON 16 position HEX ERG 16-412/2 (red knob) Real code ERG 16-412/5 (green knob) Real code ERG 16-412/6 (blue knob) Real code ERG 16-422/2 (red knob) Complement code ERG 16-422/5 (green knob) Complement code ERG 16-422/6 (blue knob) Complement code Indicator Type 10 position BCD ERG 10-312 Real code ERG 10-322 Complement code 16 position HEX ERG 16-312 Real code ERG 16-322 Complement code Suitable for vertical and horizontal (edge of PCB operation). Mass 1g max. Operating force of rotor centre 300g cm max. Drilling Matrix (All Types) Code Table This range is manufactured to our specification in Japan. This leaflet is believed to contain the best information available at the time of printing, but is subject to change without notice. Performance figures, where quoted, are actually estimates based on our experience or that of our customers or statutory authorities. In common with all components reliability varies with many factors, and users are invited to contact us in appropriate cases so that where relevant information is available it may be considered by the user. All supplies are subject to the Company’s standard conditions of sale which are available on request. Luton Road, Dunstable, Bedfordshire LU5 4LJ England Telephone: 01582 662241 Fax: 01582 600767 E-mail: info@erg.co.uk http://www.erg.co.uk Rotary coded switches 10.0mm 2.5 0.2 0.6 7.65 2.54 2.54