KEYSTONE ELECTRONICS 207
Specifications
Manufacturer
Keystone Electronics
Manufacturers Part #
207
Industry Aliases
207
Sub-Categories
Miscellaneous Tools and Supplies
Factory Pack Quantity
1
Datasheet
Extracted Text
FM4-15 Sect 1 final mark 10/11/06 2:41 PM Page 6 SNAP-IN PC CLIPS • Available for “A” • “AA” • “AAA” “AAAA” “N” size batteries • • • Mounts securely to the PC board with advanced “Snap-In” design for thru hole mounting • “Snap-In” clip holds firmly for wave soldering • Reliable spring tension assures low contact resistance • Low profile, economical design • Retains battery securely to withstand shock and vibration No Ears For “A” • “AA” • “AAA” • “N” .250 A [6.4] C Refer to page 25 for Battery Contact Layout & Mounting Details H For “AAAA” .062 L .187 [4.8] .187 [4.8] [1.57] DIA. Mounting Detail .160 .320 .266 MATERIAL: [4.1] .067 [1.70] DIA. .194 [8.1] [6.8] Spring Steel Tin Nickel Plate [4.9] .062 .228 [5.8] [1.57] .375 [9.5] .093 [2.37] B .300 [7.6] .214 [5.4] .047 [1.18] .320 [8.1] CAT. MATERIAL BATTERY BATTERY .226 [5.7] NO. A B C H L THICKNESS DIAMETER SIZE Mounting Detail 52 .250 (6.4) — — .032 (0.8) .500 (12.7) .280 (7.1) .010 (.25) No Ears MATERIAL: .010 (.25) thick Spring Steel, .055 [1.40] DIA. 92 .312 (7.9) .375 (9.5) .056 (1.4) .593 (15.1) .359 (9.1) .012 (.30) “A” • “AA” Tin Nickel Plate 531-.665 (13.5-16.9) 2915 .312 (7.9) .375 (9.5) .050 (1.3) .593 (15.1) .359 (9.1) .015 (.39) .236 82 .250 (6.4) .300 (7.6) .040 (1.0) .500 (12.7) .280 (7.1) .010 (.25) .375-.460 (9.5-11.7) “AAA” • “N” [6.0] 51 See drawing for Cat. No. 51 .010 (.25) .300-.350 (7.6-8.9) “AAAA” CAT. NO. 51 SURFACE MOUNT BATTERY CLIPS AVAILABLE ON TAPE AND REEL • Low profile for densely packed PCBs • Retains cell securely, withstands shock and vibration • “Flow-Hole” SMT solder tail design for increased joint strength • All conductive polystyrene carrier tape meets ANSI/EIA -481 standard MATERIAL: .010 (.25) thick Spring Steel, Tin Nickel Plate Refer to page 25 for Battery Contact Layout & Mounting Details For “AAA” • “N” For “AAAA” .092 [2.34] DIA. .092 .250 [6.4] [2.34] .093 [2.36] .055 [1.39] .200 [5.1] .047 [1.19] .047 [1.19] DIA. .124 [3.2] .250 .250 .040 [1.02] [6.4] [6.4] .064 [1.63] DIA. .187 [4.8] .187 [4.8] .497 Pad Layout Pad Layout .266 [12.6] .320 .258 .194 [6.8] .156 [4.0] [8.1] .092 [6.6] [4.9] .360 [9.1] MIN. TYP. [2.34] .124 MIN. MIN. [3.2] .200 [5.1] .226 [5.7] .320 [8.1] MIN. MIN. .296 .373 [9.5] .400 [10.2] [7.5] .156 [4.0] .671 [17.0] MIN. .671 [17.0] CAT. NO. 55 (Bulk) CAT. NO. 50TR (Tape & Reel) CAT. NO. 55TR (Tape & Reel) CAT. NO. 50 (Bulk) Tape & Reel Spec’s: 32mm wide; 16mm pitch; 13 inch reel, (300 pieces per reel) Tape & Reel Spec’s: 24mm wide; 16mm pitch; 13 inch reel, (500 pieces per reel) ECONOMY CONTACTS For “AA” • “C” • “D” • Designed for mounting in self-contained, non-metallic battery compartments. • Reliable spring tension assures low contact resistance. .062 [1.57] .050 H H DIA. • Recessed contact holds battery in place. [1.27] .050 • All clips have anti-rotation tab. FIG. 1 [1.27] B .120 [3.0] MATERIAL: .016 (.41) thick Spring Steel, Nickel Plate B .375 [9.5] .120 [3.1] C FIG. 2 .375 [9.5] C .687 [17.5] CAT. FIG. M CELL .375 [9.5] M NO. NO. B C H MTG. HOLE SIZE 206 1 .625 (15.9) .480 (12.2) .500 (12.7) .128 (3.3) “AA” M ANTI-ROTATION TAB 207 2 .687 (17.4) .547 (13.9) .875 (22.2) .128 (3.3) “C“ ANTI-ROTATION TAB 208 2 .750 (19.1) .562 (14.3) 1.260 (32.0) .128 (3.3) “D” Refer to page 25 for Battery Contact Layout & Mounting Details ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 6 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED BATTERY CLIPS & CONTACTS FM4-15 Sect 1 final mark 10/11/06 3:16 PM Page 10 RUGGED STEEL BATTERY CLIPS For "AA" • "C" • "D" SPECIFICATIONS Clips: Spring Steel, Nickel Plate Contact Eyelets: Brass, Nickel Plate Insulating Washers: Moisture Proof, Resin Impregnated Fibre Solder Lugs: Brass, Tin Plate • Available with insulated or non-insulated contact. Positive contact grips battery securely. G .050 86 J 87 G J .070 [1.27] 89 88 [1.78] 99 100 H D H D F F M B BM .437 [11.1] .437 [11.1] SOLDER LUG .093 [2.4] .093 [2.36] .098 [2.5] .098 [2.5] DIA. (2) PLS DIA. (2) PLS DWG. 1 DWG. 2 .144 [3.7] Non-Insulated Contact Insulated Contact .144 [3.7] DIA. DIA. EAR FOR SOLDERING CAT. DWG. STEEL BATTERY DIAMETER CELL NO. NO. B C D F G H J M THICKNESS MIN. - MAX. SIZE 86 1 .703 (17.9) .391 (9.9) .812 (20.6) .593 (15.1) .375 (9.5) .937 (23.8) .500 (12.7) .605 (15.4) .020 (.51) .875 to 1.125 (22.2 to 28.6) “C” 87 2 88 2 .775 (19.7) .463 (11.8) 1.075 (27.3) .750 (19.1) .437 (11.1) 1.187 (30.1) .500 (12.7) .609 (15.5) .020 (.51) 1.187 to 1.350 (30.1 to 34.3) “D” 89 1 99 1 .703 (17.9) .391 (9.9) .609 (15.5) .375 (9.5) .375 (9.5) .609 (15.5) .312 (7.9) .353 (9.0) .015 (.39) .531 to .650 (13.5 to 16.5) “AA” 100 2 BATTERY RETAINER CLIPS • Prevents battery from loosening in battery holder • Retainer clip slips on the ears of the battery holder clip Retainer for "C" cells or similar size Retainer for "AA" or cells with diameters batteries to 1.032 (26.2) diameter. of .532 (13.5) to .562 (14.3). Retainer for "D" cells or similar size batteries to Used with Keystone Battery Clips Used with Keystone Battery Clips 1.343 (34.1) diameter. Used with Keystone Cat. No. 86, 87, 93 and 222. Cat. No. 91, 92, 95, 99, 100 and 2915. Battery Clips Cat. No. 88, 89 and 94. MATERIAL: Stainless Steel MATERIAL: Spring Steel, Nickel Plate MATERIAL: Spring Steel, Nickel Plate CAT. NO. 61 CAT. NO. 62 CAT. NO. 63 BATTERY SPRING CONTACTS POLARITY INDICATING LABEL • No Gluing or Wetting Needed • Economical For "A" • "AA" • "C" • "D" • Pressure Sensitive Adhesive Back • Adheres To All Surfaces Easy to assemble with eyelets or rivets. Refer to page 124. Recommended where proper polarity of battery insertion or circuit polarity is to be shown. Labels are two color, (+) positive side red; arrow, (-) negative side blue. H A 1.375 [34.9] C B .250 [6.4] (FRONT) CONTACT (BACK) CONTACT CAT. CELL NO. H A B C MATERIAL SIZE .025 (.64) Dia. Spring Steel, 211 .290 (7.4) .335 (8.5) .100 (2.5) .140 (3.6) “A” • “AA” Nickel Plate .040 (1.0) Dia. Spring Steel, 211-D .850 (21.6) .650 (16.5) .162 (4.1) .300 (7.6) “C” • “D” Nickel Plate CAT. NO. 58 INSULATED POLARIZING WASHERS Prevents improper connection of battery which may cause damage to electronic equipment. Washers hold securely when snapped over eyelets. Used on our standardized battery holders. For “AA”, “C” & “D” cells. CAT. NO. 59 (RED) CAT. NO. 60 (BLACK) MATERIAL: Molded Polyethylene ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 10 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED BATTERY CLIPS, CONTACTS & ACCESSORIES
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the 207?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods