® DESIGNERS AND MANUFACTURERS RoHS COMPLIANT~ ISO 9001 CERTIFIED Coin Cell Holders & Retainers SMT Auto Blade Fuse Clips & Holders page 41 pages 2 – 7 THM & SMT Polarized Holders page 20 Insulated Coin Cell Retainers Solar Protection Fuse (SPF) page 4 Midget Fuse Holder page 43 SMT Battery Holders page 19 Micro Battery Retainers SMT & THM Test Points page 6 page 61 UL Recognized Fuse Clips pages 44 – 45 Battery Contacts Color Coded and SEMS Screw Terminals pages 8 – 16 pages 62 – 65 UL Recognized Quick Fit Terminals Vertical Card Guides pages 52 –55 pages 117 Self-Retaining Mounting Spacers for T-1 LED’s page 91 PC/104 - PC/104-Plus Mounting Kits Anti-Vibration Grommets page 70 page 129 2.0 & 3.0 USB Plugs and Sockets pages 94 – 97 Spacers Supports & Metric Standoffs Adhesive Bumpers pages 76 – 78 page 130 Micro Pins & Jacks pages 98 – 101 Nylon Self-Retaining Spacers & Washers PTFE Insulated Terminals & Pins page 75 & 131 pages 136 – 137 A C (cont.) I (cont.) P ADHESIVE BACKED Fuse . . . . . . . . . . . . . . . . 38-41, 44-45 INSULATED TERMINALS . . . . . . . . 136-137 PANEL BEARINGS . . . . . . . . . . . . . . . . . 84 Bumpers . . . . . . . . . . . . . . . . . . . . 130 COIN CELL BATTERY INSULATING HARDWARE . . . . . . . . . . . . . . PANEL HARDWARE . . . . . . . . . . . . . 83-84 PCB Supports. . . . . . . . . . . . . . . . . . 78 Holders (Lithium). . . . . . . . . . . . . . . 2-7 Bushings . . . . . . . . . . . . . . . . . . . . 128 PHONO PLUGS & JACKS . . . . . . . 102-103 ALLIGATOR CLIPS . . . . . . . . . . . . . . . . . 61 COMPUTER Ceramic Standoffs . . . . . . . . . . . . . . 74 PINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . AUDIO JACKS . . . . . . . . . . . . . . . . . . . 108 Card Ejectors . . . . . . . . . . . . . . . . . 122 Fiber Washers. . . . . . . . . . . . . . . . . 131 Contact (Seamless) . . . . . . . . . . . . 123 AUTOMOTIVE BLADE IEEE 1394 Connectors . . . . . . . . . . . 97 Mica Insulators. . . . . . . . . . . . . . . . 109 Micro . . . . . . . . . . . . . . . . . . . 100-101 FUSE CLIPS & HOLDERS . . . . . . . 38-41 Jack Screws . . . . . . . . . . . . . . . . . . . 82 Nylon Spacers. . . . . . . . . . . . . . . 74-75 Wire Wrap (.025 Square) . . . . . . . . 123 PC Card Brackets . . . . . . . . . . 118-121 Nylon Washers . . . . . . . . . . . . 131-132 PLUGS B USB Connectors . . . . . . . . . . . . . 94-96 Spacer Supports (Nylon) . . . . . . . 76-78 Banana. . . . . . . . . . . . . . . . . . 106-107 BATTERY CONTACTS & CLIPS COMPUTER BRACKETS . . . . . . . . 118-121 Phenolic Spacers . . . . . . . . . . . . . . . 74 Hole. . . . . . . . . . . . . . . . . . . . . . . . 128 Clips/Accessories . . . . . . . . . . . . . 8-11 Worksheet (Custom Design) . . . . . . 122 INSTALLATION TOOLS Shorting . . . . . . . . . . . . . . . . . . . . . 101 Retainers (Compact Contacts) . . . 4, 6-7 CONNECTORS Eyelet. . . . . . . . . . . . . . . . . . . . . . . 134 Solderless . . . . . . . . . . . . . . . . . . . 107 SMT (Surface Mount). . . . . . . . . . . . 7-8 F . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Quick-Fit. . . . . . . . . . . . . . . . . . . 52, 57 Tips & Plugs . . . . . . . . . . . . . . . . . . 104 Snap-On for Plastic Cases. . . . . . . . . 12 IEEE 1394 . . . . . . . . . . . . . . . . . . . . 97 Rivet. . . . . . . . . . . . . . . . . . . . . . . . 135 PUSH-IN TERMINALS Spring . . . . . . . . . . . . . . . . 8-10, 12-16 Mounting Hardware . . . . . . . . . . . 82-84 Solder Terminal. . . . . . . . . . . . . . . . 135 Flea Clip, Imp, Micro, THM (Thru Hole Mount) . . 7,9,13,29-30 Screw Terminals. . . . . . . . . . . . . . 62-67 Staking . . . . . . . . . . . . . . . . . . . 73,135 Solderless, Tubular . . . . . . . . . . . . . 123 BATTERY HOLDERS USB . . . . . . . . . . . . . . . . . . . . . . 94-96 Q Aluminum . . . . . . . . . . . . . . . 20-23, 31 CONTACT PINS (Seamless) . . . . . . . . . 123 J Button Cell . . . . . . . . . . . . . . . . . . . 6-7 QUICK-FIT COMPONENTS . . . . . . . . . . . . . JACKS E Coin Cell (Lithium). . . . . . . . . . . . . . 2-7 Boots . . . . . . . . . . . . . . . . . . . . . . . . 56 Audio . . . . . . . . . . . . . . . . . . . . . . . 108 Contacts . . . . . . . . . . . . . . . . . . . 12-16 EYELETS . . . . . . . . . . . . . . . . . . . . . . . 134 Headers . . . . . . . . . . . . . . . . . . . . . . 54 Banana . . . . . . . . . . . . . . . . . . . . . 107 Covered, Plastic . . . . . . . . . . . . . . . . 27 EYELET STAKING TOOL . . . . . . . . . 134,135 PC Mount Female Terminals . . . . . . . 55 Insulated . . . . . . . . . . . . . . . . . . . . 105 Interconnect, Steel/Aluminum. . . . . . 21 PC Mount Male Terminals . . . . . . 52-54 Micro . . . . . . . . . . . . . . . . . . . . . 98-99 F Lithium . . . . . . . . . . . . . . . . . . . . 17-20 Rivet Mount . . . . . . . . . . . . . . . . . . . 54 Phono. . . . . . . . . . . . . . . . . . . 102-103 Lithium-Ion . . . . . . . . . . . . . . . . 17, 31 FAN/FINGER GUARDS . . . . . . . . . . . 88-89 Surface Mount Female Terminals. . . . 55 Test . . . . . . . . . . . . . . . . . . . . . . . . 105 9 Volt . . . . . . . . . . . . . . . . . . 22-23, 31 FIBER WASHERS QUICK-FIT INSERTION TOOL. . . . . . . . . . 52 Tip . . . . . . . . . . . . . . . . . . . . . . . . . 104 Plastic . . . . . . . . . . . . 17-20, 26-27, 31 (Flat & Shoulder) . . . . . . . . . . 131-132 JACK SCREWS . . . . . . . . . . . . . . . . . . . 82 R Retainers (Compact Contacts) . . . 4, 6-7 FIREWIRE PLUGS & SOCKETS . . . . . . . . 97 SMT (Surface Mount) . . . 2, 4-5, 17, 19 FUSE CLIPS & HOLDERS . . . . . . . . . 38-49 RIVETS . . . . . . . . . . . . . . . . . . . . . . . . 134 K Steel . . . . . . . . . . . . . . . . 20-21, 24-25 Automotive Blade . . . . . . . . . . . . 38-41 RUBBER BUMPERS & GROMMETS . . . 130 KNOBS. . . . . . . . . . . . . . . . . . . . . . . . . 85 Straps. . . . . . . . . . . . . . . . . . . . . 28-29 Clips . . . . . . . . . . . . . . . . 38-41, 44-45 RETAINING SPACERS. . . . . . . . . . . . . . . 75 THM (Thru Hole Mount) . . . . . . . . . . . . . Covers . . . . . . . . . . . . . . . . . . . . . . . 43 RETAINING WASHERS . . . . . . . . . . . . . 131 L . . . . . . . . 2-5, 7, 17-18, 20-21, 26, 31 Holders . . . . . . . . . . . . . . . . . . . . 38-43 LED HOLDERS . . . . . . . . . . . . . . . . . . . 90 Vertical . . . . . . . . . . . . . . . . . . . . . . 2-3 Midget (SPF) . . . . . . . . . . . . . . . . . . 43 S LED LENS CAPS . . . . . . . . . . . . . . . . . . 90 BATTERY CONTACTS LAYOUT Sub-Miniature. . . . . . . . . . . . . . . . . . 43 SCREWS LED SPACER MOUNTS. . . . . . . . . . . . . . 91 & MOUNTING DETAILS . . . . . . . . 32-34 FUSE CONTACTS LAYOUT Colored Head . . . . . . . . . . . . . . . . . 133 Lugs (Solder) . . . . . . . . . . . . . . . . . . 58 BATTERY SNAPS & STRAPS 9 VOLT & MOUNTING DETAILS . . . . . . . . 46-49 Handle Mounting . . . . . . . . . . . . . . . 87 Snap-On . . . . . . . . . . . . . . . . . . . 28-30 Jack . . . . . . . . . . . . . . . . . . . . . . . . . 82 M G Straps. . . . . . . . . . . . . . . . . . . . . 28-29 Machine . . . . . . . . . . . . . . . . . . . . 133 MALE/FEMALE STANDOFFS . . . . . . . 70-72 BANANA PLUGS & JACKS . . . . . . 106-107 GROMMETS . . . . . . . . . . . . . . . . . . . . 129 Metric. . . . . . . . . . . . . . . . . . . . . . . 133 Aluminum, Brass, Nylon, BINDING POSTS . . . . . . . . . . . . . . . . . 108 GUARDS, FAN/ FINGER . . . . . . . . . . 88-89 Panel . . . . . . . . . . . . . . . . . . . . . . . . 83 Stainless Steel . . . . . . . . . . . . . . . . . 70 BOARD GUIDES, P.C. . . . . . . . . . . 116-117 Self-Tapping . . . . . . . . . . . . . . . . . . 133 H Metric. . . . . . . . . . . . . . . . . . . . . . . . 72 BRACKETS (Mounting). . . . . . . . . 114-115 Shoulder . . . . . . . . . . . . . . . . . . . . . 84 PC/104 . . . . . . . . . . . . . . . . . . . . . . 70 BRACKETS (Computer) . . . . . . . . 118-121 HALOGEN LAMP SOCKET . . . . . . . . . . . 11 Thumb . . . . . . . . . . . . . . . . . . . . . . . 83 MICA TRANSISTOR INSULATORS . . . . . 109 BUMBERS, Adhesive Backed. . . . . . . . 130 HANDLES, INSTRUMENT . . . . . . . . . 86-87 SCREW TERMINALS . . . . . . . . . . . . . 62-67 MICRO JACKS . . . . . . . . . . . . . . . . . 98-99 BUMPERS, Rubber . . . . . . . . . . . . . . . 130 HARDWARE SHAFT LOCKS / EXTENDERS . . . . . . . . . 84 MICRO PINS . . . . . . . . . . . . . . . . 100-101 BUSHINGS (Nylo/Rubber). . . . . . 128-129 Computer Mounting. . . . . . . . . . . . . 82-84 SHORTING JACK . . . . . . . . . . . . . . . . . 101 MIDGET FUSE HOLDER . . . . . . . . . . . . . 43 Handle Mounting Screws. . . . . . . . . . 87 SHORTING PIN . . . . . . . . . . . . . . . . . . 101 C MOUNTING BRACKETS. . . . . . . . . 114-115 Nuts / Machine Screws. . . . . . . . . . 133 SHORTING PLUG. . . . . . . . . . . . . . . . . 101 CABLE TIE ROUTING CLIP . . . . . . . . . . 127 Panel Hardware & Nuts . . . . . . . . 83-84 SHOULDER SCREWS. . . . . . . . . . . . . . . 84 N CABLE CLAMPS. . . . . . . . . . . . . . 126-127 Transistor Mounting . . . . . . . . . 109-111 SMT (Surface Mount Components) CABLE TIES . . . . . . . . . . . . . . . . . . . . 127 HINGED STANDOFFS. . . . . . . . . . . . . . . 75 Audio Jacks . . . . . . . . . . . . . . . . . . 108 NYLON CABLE CLAMPS. . . . . . . . . . . . 127 CAPS, LED LENS. . . . . . . . . . . . . . . . . . 90 HOLE PLUGS . . . . . . . . . . . . . . . . . . . 128 Battery Contacts . . . . . . . . . . . . . . . 6-8 NYLON INSULATED CAPTIVE NUTS . . . . . . . . . . . . . . . . . . 132 Coin Cell Holders. . . . . . . . . . . . . . . 2-7 SPACER SUPPORTS . . . . . . . . . . . 76-80 I CAPTIVE SCREWS . . . . . . . . . . . . . . . . . 83 Coin Cell Retainers . . . . . . . . . . . 4, 6-7 NYLON SCREWS . . . . . . . . . . . . . . . . . 133 CARD EJECTORS, PC . . . . . . . . . . . . . . 122 IEEE 1394 (FIRE WIRE) Test Points . . . . . . . . . . . . . . . . . . . . 61 NYLON SNAP RIVETS . . . . . . . . . . . . . 134 CASES (Instrumentation) . . . . . . . . . . . 85 PLUGS& SOCKETS . . . . . . . . . . . . . . 97 SOCKETS NYLON SPACERS . . . . . . . . . . . . . . . 74-75 CLIPS INSTRUMENTATION CASES . . . . . . . . . . 85 Halogen . . . . . . . . . . . . . . . . . . . . . 110 NYLON STANDOFFS . . . . . . . . . . . . . 70-72 Alligator . . . . . . . . . . . . . . . . . . . . . . 60 INSTRUMENTATION HANDLES . . . . . 86-87 IEEE 1394 . . . . . . . . . . . . . . . . . . . . 97 NYLON WASHERS (Flat,Shoulder Battery . . . . . . . . . . . . . . . . . . . . . 8-11 INSULATED COIN CELL RETAINERS . . . . . 4 Micro . . . . . . . . . . . . . . . . . . . . . 98-99 & Retaining) . . . . . . . . . . . . . . 131-132 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED S (cont.) T (cont.) BATTERY CLIPS, Phono. . . . . . . . . . . . . . . . . . . 102-103 Surface Mount . . . . . . . . . . . . . . . . . 61 CONTACTS Transistor . . . . . . . . . . . . . . . . 109-111 Ultra Low Profile . . . . . . . . . . . . . . . . 60 & HOLDERS USB . . . . . . . . . . . . . . . . . . . . . . 94-96 TEST TIPS & PLUGS. . . . . . . . . . . 104-105 PAGE 2 SOLDER LUGS & TERMINALS . . . . . . . . 58 THUMB SCREWS . . . . . . . . . . . . . . . . . 83 SOLDER TERMINALS . . . . . . . . . . 136-139 TIP JACKS . . . . . . . . . . . . . . . . . . 104-105 SPACERS TRANSISTOR COVERS . . . . . . . . . . . . . 110 Aluminum, Brass, Nylon, Phenolic 74-75 TRANSISTOR SOCKETS/MOUNTS . 109-111 LED . . . . . . . . . . . . . . . . . . . . . . . . . 91 TRANSISTOR SOCKET Organizer Kits . . . . . . . . . . . . . . . . . . 79 MOUNTING KITS . . . . . . . . . . . 109,111 FUSE CLIPS PC Board (Snap In) . . . . . . . . . . . 76-78 TURNABLE JACK SCREWS . . . . . . . . . . . 82 & HOLDERS SQUARE WRAP PINS (.025) . . . . . . . . 123 PAGE 38 U STAKING TOOLS. . . . . . . . . . . . . . . 73,135 STANDOFFS USB PLUGS & SOCKETS . . . . . . . . . 94-96 Aluminum, Brass, Ceramic, Flame V Retardant, Nylon, Phenolic, Stainless Steel . . . . . . . . . . . . . . 70-74 VERTICAL COIN CELL HOLDERS . . . . . . 2-3 TERMINALS Hinged . . . . . . . . . . . . . . . . . . . . . . . 75 VIBRATION (ANTI) GROMMETS. . . . . . . 129 & TEST Metric. . . . . . . . . . . . . . . . . . . . . . . . 72 POINTS W Organizer Kits . . . . . . . . . . . . . . . . . . 79 PAGE 49 PC/104 . . . . . . . . . . . . . . . . . . . . . . 70 WASHERS STURDI-MOUNT Fibre (Flat & Shoulder) . . . . . . 131-132 QUICK-FIT TERMINALS . . . . . . . . . 52-53 Nylon (Flat & Shoulder). . . . . . 131-132 Retaining . . . . . . . . . . . . . . . . . . . . 131 T WORKSHEETS (Custom) TAPE & REEL COMPONENTS Computer Brackets . . . . . . . . . . . . . 122 SPACERS & Audio Jacks . . . . . . . . . . . . . . . . . . 108 STANDOFFS Battery Contacts. . . . . . . . . . . . . . . . . 8 PAGE 70 Coin Cell Holders. . . . . . . . . . . . . 2, 4-5 Coin Cell Retainers . . . . . . . . . . . 4, 6-7 Firewire Sockets . . . . . . . . . . . . . . . . 97 Fuse Clips . . . . . . . . . . . . . . . . . . 40-41 Fuse Holders . . . . . . . . . . . . . . . . . . 41 PANEL Test Points . . . . . . . . . . . . . . . . . . . . 61 HARDWARE USB Plugs & Sockets . . . . . . . . . 94-96 TERMINAL BOARDS PAGE 82 Military. . . . . . . . . . . . . . . . . . . . . . 141 Screw. . . . . . . . . . . . . . . . . . . . . . . 143 Scored . . . . . . . . . . . . . . . . . . . . . . 140 Turret Terminal. . . . . . . . . . . . . 140-142 Quick-Fit. . . . . . . . . . . . . . . . . . . . . 142 PINS, PLUGS, TERMINALS JACKS & SOCKETS Boards . . . . . . . . . . . . . . . . . . 140-143 Insulated . . . . . . . . . . . . . . . . 136-137 PAGE 94 Lugs (Solder) . . . . . . . . . . . . . . . . . . 58 Male/Female, Quick-Fit . . . . . . . . 52-55 Micro . . . . . . . . . . . . . . . . . . . . . 98-99 Push In. . . . . . . . . . . . . . . . . . . . . . 123 Screw . . . . . . . . . . . . . . . . . . . . . 62-67 PC BOARD Solder (Standardized/Turret) . . 138-139 HARDWARE Solderless. . . . . . . . . . . . . . . . . . 56-57 PAGE 114 Strips . . . . . . . . . . . . . . . . . . . . . . . 143 Sturdi-Mount, Quick-Fit . . . . . . . . 52-55 Test Points. . . . . . . . . . . . . . . . . . 59-61 TERMINAL STRIPS Binding Post (Screw Terminal) . . . . . 143 Standard & Miniature . . . . . . . . . . . 143 MULTI-PURPOSE TEST JACKS. . . . . . . . . . . . . . . . . 104-105 HARDWARE TEST POINTS PAGE 126 Color Keyed . . . . . . . . . . . . . . . . . . . 60 PC Mount . . . . . . . . . . . . . . . . . . 59-60 ® RoHS COMPLIANT~ ISO 9001 CERTIFIED BATTERY CLIPS, CONTACTS & HOLDERS Our battery clips, contacts and holders are designed with leading edge technology in mind, to accommodate all major manufacturers’ batteries. Available in a wide range of materials and mounting styles including surface mount, thru hole and off board, some of the applications include: • Telecommunications and Video power back-up • Laptop and mobile computing applications • Communication system’s power requirements • Microcomputer and memory hold • Preprogrammed electronic and video games • Emergency power systems • Industrial and commercial security and alarm systems • Miniature battery power devices • Computer memory, power transfer and back-up systems • Personal medical monitoring devices Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoHS and REACH directives. We provide 3D modeling, CAD andother application-engineering support for modifications, special designs or assemblyrequirements to assist you in choosing the right Keystone product for your application. BATTERY CLIPS, CONTACTS & HOLDERS SECTION CONTENTS RETAINERS HOLDERS Button Cell ........................................................6 Aluminum.................................................21-23 Coin Cell ..............................................................7 Coin Cell ........................................................2-7 Negative Contacts ............................................7 Lithium Cell.....................................................20 PC Mount .................................................18-19 CLIPS/CONTACTS Plastic ....................................................26-27 Alkaline & Lithium, Rivet ................................10 Steel.......................................................24-25 Alkaline & Lithium, PC ................................8-9 9 Volt ................................................................31 Battery Clips (no contact) ..............................11 9 Volt Straps ........................................28-29 Molded Case.............................................12-16 18650 Rechargeable.......................................17 9 Volt .............................................................30 MOUNTING DETAILS..........................32-35 1 THRU-HOLE (THM) & SURFACE MOUNT (SMT) COIN CELL HOLDERS IDEALLY SUITED FOR… DESIGN ADVANTAGES… • Computer memory, power transfer and back-up systems • Reliable spring tension assures low contact resistance • Video and telecommunications power back-up • Retains battery securely to withstand shock and vibration • Microprocessors and Microcomputer memory hold (desktop and laptop applications) • Base material UL Rated 94V-0. Impervious to most industrial solvents • Industrial and commercial security and alarm systems • Operating temperature range: -60°F to +293°F (-50°C to +145°C) • PC/104 application 1/3N AVAILABLE ON TAPE AND REEL .038 [.97] WIDE .506 [12.9] .507 [12.9] PIN (2) PLS. .125 [3.2] TYP. REF. REF. BATTERY RELEASE .430 [10.9] .570 [14.5] .450 [11.4] THRU HOLE MOUNT .570 [14.5] .430 [10.9] .748 [19.0] SURFACE MOUNT BATTERY RELEASE .048 [1.2] DIA. .540 [13.7] x .060 [1.52] L. .540 [13.7] .048 [1.2] DIA. x .060 [1.52] L. Pad Layout MATERIAL: Mounting Detail MATERIAL: Base: High Temperature Nylon 46, UL Rated 94V-0 .121 [3.1] .053 [1.3] DIA. Base: High Temperature Nylon 46, UL Rated 94V-0 Contacts: .012 (.30) Phosphor Bronze, Gold Plate (Flash) .031 [0.79] .125 [3.2] Contacts: .012 (.30) Phosphor Bronze, Tin Plate CAT. NO. ON TAPE .053 [1.3] DIA. .240 [6.1] BULK & REEL CELLS BATTERY REFERENCE .240 [6.1] CAT. NO. CELLS BATTERY REFERENCE .047 [1.2] 1 DL1/3N, K58L, CR1/3N .156 [4.0] DIA. (2) PLS 498 498TR .748 1 DL1/3N, K58L, CR1/3N [19.0] .450 [11.40] 2 SR44, 357, MS76, G-13, 303, V313, PX76A 503 2 SR44, 357, MS76, G-13, 303, V313, PX76A Tape & Reel Spec’s: 44mm wide; 20mm pitch; 13 inch reel (200 pieces per reel) AVAILABLE ON TAPE AND REEL 12mm .750 [19.1] .497 [12.6] I.D. .071 [1.8] .591 [15.0] DIA. .593 [15.1] .048 [1.22] .196 [5.0] (2) PLS O.D. DIA. LEG POSITIVE THRU HOLE MOUNT SURFACE MOUNT .740 .567 .036 [0.91] H [18.8] [14.4] DIA. LEG .062 [1.57] DIA. LEG (3) PLS. ON .375 [2.5] CIR. DIA. .157 [4.0] .120 [3.0] MIN. NEGITIVE .512 [13.0] I.D. .393 [10.0] Pad Layout .035 [0.9] MATERIAL: Base: PBT, UL Rated 94V-0 .088 [2.2] .295 [7.5] Mounting Detail Positive Contact: .015 (.38) Spring Steel, Tin-Nickel Plate MATERIAL: .042 [1.1] .055 DIA. [1.4] Negative Contact: .035 (.89) Dia. Steel, Tin-Nickel Plate Base: Glass Filled PPS. UL Rated 94V-0 DIA. .040 [1.0] DIA Contacts: .008 (.20) Phosphor Bronze, Gold Plate (Flash) CAT. HEIGHT (2) PLS. .144 .102 NO. (H) CELLS BATTERY REFERENCE CAT. NO. ON TAPE [3.6] [2.6] BULK & REEL CELLS BATTERY REFERENCE .480 [12.2] 500 .280 (7.1) 1 BR1212, CR1216, CL1220, CR1225 .393 .061 [1.5] 1056 1056TR 1 CR1220, BR1220 [10.0] 501 .380 (9.7) 2 BR1212, CR1216, CL1220, CR1225 Tape & Reel Spec’s: 32mm wide; 20mm pitch; 13 inch reel (500 per reel) .897 [22.8] AVAILABLE ON TAPE AND REEL 16mm POSITIVE .750 [19.0] .196 [5.0] 1.129 [28.7] O.D. THRU HOLE MOUNT .635 [16.1] I.D. .630 [16.0] H SURFACE MOUNT .062 [1.57] DIA. .138 [3.5] LEG (3) PLS. ON (2) PLS .375 [2.5] CIR. DIA. .677 [17.2] .120 [3.0] MIN. NEGITIVE .463 .035 [0.9] [11.8] .212 [5.4] MATERIAL: Base: Glass Filled LCP, UL Rated 94V-0 Pad Layout Positive Contact: .015 (.38) Spring Steel, Tin-Nickel Plate Mounting Detail Negative Contact: .035 (.89) Dia. Steel, Tin-Nickel Plate 1.129 [28.7] MIN. MATERIAL: CAT. HEIGHT .138 [3.51] Base: Glass Filled LCP, UL Rated 94V-0 .040 [1.0] DIA NO. (H) CELLS BATTERY REFERENCE (2) PLS. Contacts: .006 (.15) Phosphor Bronze, Gold Plate (Flash) 1 CR1612, CL1616, CL1620 .111 502 .285 (7.3) [2.82] .250 [6.4] 2 CR1612 CAT. NO. ON TAPE SQUARE ZONE .463 BULK & REEL CELLS BATTERY REFERENCE .061 [1.5] FOR OPTIONAL 1 BR1625, CR1632 [11.8] ADHESIVE 502-3 .330 (8.4) 504 504TR 1 BR1625, CR1632 2 BR1616, CR1620, CL1620 Tape & Reel Spec’s: 44mm wide; 24mm pitch; 13 inch reel (450 per reel) 16mm VERTICAL .640 .832 [21.1] .270 [6.9] [16.3] .728 [18.5] DIA. .200 [5.1] Pad Layout .680 [17.3] REF. .125 .478 [12.1] MATERIAL: [3.2] .136 [3.5] .174 [4.4] Base: PBT, UL Rated 94V-0 (2) PLS + Contacts: .010 (.25) Steel, Tin-Nickel Plate .136 [3.5] .070 Battery Reference: (1) cell: BR1612, CR1616, CL1620, .050 [1.3] .145 [1.8] .060 [1.5] CR1625, BR1632 [3.7] DIA. .045 [1.1] (2) PLS .047 [1.2] .422 .478 [12.1] .422 [10.7] [10.7] CAT. NO. 1069 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 2 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED 12mm to 16mm COIN CELL HOLDERS 20mm COIN CELL HOLDERS 20mm THRU-HOLE MOUNT COIN CELL HOLDERS L NEG • Advanced air-flow design enhances air circulation + .250 [6.3] O.D. around battery • Reliable spring tension assures low contact resistance • Unique notched slots assure quick and easy battery • Cat. No. 101 is designed to maximize .796 [20.2] I.D. PC Board Capacity insertion and replacement • Retains battery securely to withstand shock and vibration • Unique raised mounting design allows H • PBT base material UL rated 94V-0. Impervious to most components to be placed underneath G the holder industrial solvents • Operating temperature range: • Ideal when board space is more impor- .179 [4.6] .807 [20.5] tant than board height; such as -60ºF to +293ºF (-50ºC to +145ºC) .062 [1.57] DIA. .050 [1.27] AT TIP PC/104 applicatons LEG (3) PLS. MATERIAL: .045 [1.14] ON .750 [19.00] Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate CIRCLE DIA. Base: PBT, UL Rated 94V-0 CAT. NO. G H L O.D. NO. OF CELLS BATTERY REFERENCE Mounting Detail (1) cell (any 20mm) .807 [20.5] 103 .100 (2.5) .335 (8.5) 1.130 (28.7) .896 (22.8) BR2012,CR2012, CR2016, CL2016, DL2020, CL2025, BR2025, CR2032, CL2032 (2) 2012, (2) 2016 (1) cell (any 20mm) - + 101 .179 (4.6) .414 (10.5) 1.130 (28.7) .896 (22.8) BR2012,CR2012, CR2016, CL2016, DL2020, CL2025, BR2025, CR2032, CL2032 (2) 2012, (2) 2016 (1) cell (any 20mm) 106 .100 (2.5) .335 (8.5) 1.219 (31.0) 1.093 (27.8) BR2012,CR2012, CR2016, CL2016, DL2020, CL2025, BR2025, CR2032, CL2032 (2) 2012, (2) 2016 .050 [1.27] DIA. .070 [1.78] 1026 .100 (2.5) .452 (11.5) 1.219 (31.0) 1.093 (27.8) (2) 2020, (2) 2025, (2) 2032 DL2020, CR2020, CL2025, BR2025, CR2032, CL2032 TOP LOADING 1.089 [27.7] .906 [23.0] • Battery “Pop-in”from top for compact applications Mounting Detail .807 [20.5] • Finger pressure against leaver will release battery .094 [2.4] • No tools required for battery changes .035 [.89] DIA. MATERIAL: .388 [9.85] Contacts: .016 (.40) Phosphor Bronze, Tin Plate Base: Nylon UL Rated 94V-0 .023 [.58] .122 [3.10] .787 .787 CAT. NO. BATTERY REFERENCE .059 [1.50] DIA. LEG (3) PLS. [20.0] [20.0] 1066 BR2025, CR2032 ON .730 [18.5] CIRCLE DIA. VERTICAL COMPACT • Accepts all major manufacturers’ 20mm diameter batteries • Molded notch prevents improper insertion of 2032 size cells • Retains cells securely, withstands shock and vibration • Polarity clearly marked • Mounts securely for wave soldering .875 [22.2] • Temperature range: -60°F to +293°F (-50°Cto+145°C) .670 [17.0] .531 [3.6] .785 [19.9] Mounting Detail MATERIAL: .047 [1.19] DIA. .055 [1.4] .140 [3.6] Contacts: .012 (.30) Spring Steel, Tin-Nickel Plate .038 [1.0] .094 [2.4] + .060 [1.57] DIA x Base: PBT, UL Rated 94V-0 .300 [7.6] DIA .062 [1.57] L. LEG .300 [7.6] .280 - [7.1] CAT. NO. BATTERY REFERENCE .280 [7.1] 1067 CR2016, DL2020, CL2025, CR2032 • Polarized holder VERTICAL SLIMLINE • Mounts securely for wave soldering • Reliable spring tension assures low contact resistance • Retains 20mm batteries securely to withstand shock and vibration 1.040 [26.4] .300 [7.6] • Temperature range -60°F to +293°F (-50°C to +145°C) .920 [23.4] .238 [6.0] .795 [20.2] DIA. 1.000 + [25.4] .918 [23.3] REF. NEG Mounting Detail .150 [3.8] .515 [13.1] .315 [8.0] MATERIAL: .050 [1.3] .070 (2) PLS Contacts:.016 (.40) Spring Steel, Tin-Nickel Plate .136 [3.5]DIA. .045 [1.14] [1.8] .118 [3.0] .145 [3.7] .515 Base: PBT, UL Rated 94V-0 .060 [1.52] DIA. [13.1] .600 [15.2] CAT. NO. BATTERY REFERENCE .600 [15.2] .295 [7.5] 1065 BR2012, CR2016, DL2020, CL2025, CR2032 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 3 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED POS NEG THRU-HOLE (THM) & SURFACE MOUNT (SMT) COIN CELL HOLDERS DESIGN ADVANTAGES… IDEALLY SUITED FOR… • Base material UL Rated 94V-0. Impervious • Industrial and commercial security and • Reliable spring tension assures low contact • Computer memory, power transfer and resistance to most industrial solvents back-up systems alarm systems • Operating temperature range: • Communications power sources • Retains battery securely to withstand shock • Video and telecommunications power back-up and vibration -60°F to +293°F (-50°C to +145°C) • Microprocessors and Microcomputer memory • PC/104 applications • All conductive polystyrene carrier tape meets hold (desktop and laptop applications) ANSI/EIA - 481 standard 20mm CELLS AVAILABLE ON TAPE AND REEL .896 .437 [22.8] [11.1] D • Polarity clearly marked (+) • SMT solder tail with “Flow-Hole” design for increased • Compatible with vacuum and mechanical pick & joint strength place assembly systems • Viewable solder tails assures reliable joint inspection .931 .703 • Low profile for high density packaging • Safe for all soldering & reflow operations [17.9] [23.65] • Rugged construction, light weight MATERIAL: D Contacts: .015 (.38) Steel .125 H Base: High Temperature, Nylon 46, UL Rated 94V-0 [3.2] Tin-Nickel Plate Gold Plate (Flash) Pad Layout CAT. NO. ON TAPE CAT. NO. ON TAPE DH BATTERY .093 [2.36] BULK & REEL BULK & REEL PAD SIZE HIEGHT CELLS REFERENCE MIN. 1061 1061TR 1081 1081TR .156 (4.0) (1) Cell (any 20mm) .290 (7.4) CR2012, CL2016, .703 1063 1063TR 1093 1093TR .278 (7.1) (2) 2012, (2) 2016 [17.6] BR2020, DL2032 MAX. 1062 1062TR 1082 1082TR .156 (4.0) (2) 2020, (2) 2025, (2) 2032 CR2032 .391 (9.9) D MIN. 1064 1064TR 1094 1094TR .278 (7.1) (3) 2012, (3) 2016 Tape & Reel Spec’s: 44mm wide; 32mm pitch; 13 inch reel (200 pieces per reel) AVAILABLE ON TAPE AND REEL 2025 / 2032 CELL • Polarized Holders • Low Profile for high density packaged PCB’s 1.118 [28.4] Surface Mount • Vertical entry 1.118 [28.4] Thru Hole Mount .630 .630 .142 [3.6] [16.0] [16.0] • Compatible with vacuum .866 [22.0] .866 [22.0] and mechanical pick & place assembly systems .217 [5.5] .217 [5.5] .130 [3.3] MATERIAL: 1.256 [31.9] 1.060 [26.9] Contacts: .006 (.15) Phosphor Bronze, Pad Layout Gold Plate (Flash) Mounting Detail Base: Glass Filled LCP, UL Rated 94V-0 1.154 [29.3] .102 [2.6] MIN. MATERIAL: CAT. NO. ON TAPE 1.060 [26.9] Contacts: .006 (.15) BULK & REEL BATTERY REFERENCE .038 Phosphor Bronze, Tin Plate 1060 1060TR CR2025, DL2032 .142 .100 CAT. [0.97] .433 [11.0] X .276 [7.0] [3.6] [2.5] Base: Glass Filled LCP, Tape & Reel Spec’s: 44mm wide; 24mm pitch; 13 inch reel NO. BATTERY REFERENCE OPTIONAL ADHESIVE UL Rated 94V-0 ZONE (500 pieces per reel) 1059 CR2025, DL2032 INSULATED RETAINERS AVAILABLE ON TAPE AND REEL 20mm CELLS • Ideal for 6 volt or 3 volt applications • Low profile • Two coin cell batteries can be installed in series • Battery release ports for easy battery replacement • Plastic insulator prevents shorting of battery, within • Refer to pages 6 & 7 for a complete offering of coin the holder, when installed improperly cell retainers MATERIAL: Contacts: .010 (.25) Phosphor Bronze Insulator: High Temperature, Nylon 46, UL Rated 94V-0 .093 [2.4] DIA. Surface Mount Thru Hole Mount L .200 [5.1] .535 [13.6] L .532 [13.5] Pad Layout Mounting Detail BATTERY RELEASE BATTERY RELEASE NEG. CONTACT (PAD) (2) PLS. (2) PLS .156 [3.96] SQ. MIN. NEG. CONTACT (PAD) * .940 [23.9] .156 [3.96] SQ. MIN. .939 [23.9] H .200 [5.1] H .073 [1.85] SQ. MIN. .939 DIA. (2) PLS [23.9] 1.339 [34.0] MIN. 1.339 [34.0] .110 [2.8] 1.004 [25.5] Surface Mount Thru Hole Mount Tin-Nickel Plate Matte Tin Plate BATTERY REFERENCE Tin-Nickel Plate CAT. NO. CAT. NO. ON TAPE CAT. NO. CAT. NO. ON TAPE 6 VOLT 3 VOLT CAT. NO. CAT. NO. LOOSE* BULK & REEL LOOSE* BULK & REEL L H (2) CELLS (1) CELL L H LOOSE* BULK 3020-2 3020 3020TR 3070-2 3070 3070TR .890 (22.6) .156 (4.0) 2012, 2016 2020, 2025 .890 (22.6) .156 (4.0) 3021-2 3021 3022-2 3022 3022TR 3072-2 3072 3072TR .877 (22.3) .240 (6.1) 2020, 2025 2032 .877 (22.3) .240 (6.1) 3023-2 3023 3024-2 3024 3024TR 3074-2 3074 3074TR .877 (22.3) .295 (7.5) 2032 Not Applicable .877 (22.3) .295 (7.5) 3025-2 3025 * Supplied Unassembled Tape & Reel Spec’s: 56mm wide; 28mm pitch; 13 inch reel: 3020TR, 3070TR 400 pieces per reel; 3022TR, 3072TR 250 pieces per reel; 3024TR, 3074TR 250 pieces per reel ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 4 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED 20mm COIN CELL HOLDERS 23mm to 30mm COIN CELL HOLDERS NEG THRU-HOLE (THM) & SURFACE MOUNT (SMT) COIN CELL HOLDERS 23mm AVAILABLE ON TAPE AND REEL • Polarity clearly marked (+) • Rugged construction, light weight • SMT solder tail with “Flow-Hole” design for .911 [23.1] increased joint strength I.D. NEG • Viewable solder tails assures reliable joint inspection O.D. • Safe for all soldering & reflow operations .437 1.000 [11.1] • Compatible with vacuum and mechanical pick [25.4] Surface Mount & place assembly systems .062 [1.57] DIA. LEG D (3) PL ON .750 [19.1] L CIRCLE DIA. .931 .703 Pad Layout Mounting Detail [23.6] [17.9] H Thru Hole Mount .100 [2.5] .055 [1.4] DIA .187 [4.8] MIN. (2) PLS. D .050 [1.3] .807 .045 [1.1] .125 .290 [20.5] MATERIAL: .703 [3.2] [7.4] [17.9] Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate D MIN. Base: PBT, UL Rated 94V-0 MATERIAL: .807 [20.5] Operating Temperature: -60°F to +293°F (-50°C to +145°C) Contacts: .015 (.38) Steel Base: High Temp Nylon 46, UL Rated 94V-0 CAT. NO. OF BATTERY Operating Temperature: -60°F to +293°F (-50°C to +145°C) NO. H L O.D. CELLS REFERENCE Tin-Nickel Plate Gold Plate (Flash) 104 .335 (8.5) 1.150 (29.2) 1.000 (25.4) (1) Cell (Any 23mm) CAT. NO. ON TAPE CAT. NO. ON TAPE DBATTERY BR2320, CR2320, BULK & REEL BULK & REEL PAD SIZE REFERENCE 107 .335 (8.5) 1.219 (31.0) 1.093 (27.8) (1) Cell (Any 23mm) CL2325, DL2330, 1071 1071TR 1091 1091TR .156 (4.0) CR2320, CL2325, (1) 2354 CL2354, CR2335 1073 1073TR 1083 1083TR .278 (7.1) DL2330, CR2335 1027 .452 (11.5) 1.219 (31.0) 1.093 (27.8) (2) 2320, (2) 2325, Tape & Reel Spec’s: 44mm wide; 32mm pitch; 13 inch reel, (200 pieces per reel) (2) 2330 Note: All conductive polystyrene carrier tape meets ANSI/EIA - 481 standard 24mm • Advanced air-flow design enhances • Polarized holder .985 [24.0] air circulation around battery • Mounts securely for wave soldering I.D. NEG • Unique notched slots assure • Reliable spring tension assures low 1.093 quick and easy battery insertion contact resistance [27.8] .232 [5.9] and replacement .370 [9.4] 1.135 .770 [28.9] .062 [1.57] DIA. LEG 1.255 [19.6] (3) PL ON .750 [19.1] [31.9] DIA. 1.219 [31.0] CIRCLE DIA. Thru Hole Mount 1.090 1.027 H [27.7] [26.1] REF. .187 [4.8] Thru Hole Mount .050 [1.3] L .045 [1.1] .145 .070 .050 [1.3] MATERIAL: .150 [3.7] [1.8] .045 [1.1] [3.8] .810 [20.6] Base: PBT, UL Rated 94V-0 .620 [15.7] Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate Operating Temperature: -60°F to +293°F (-50°C to +145°C) Mounting Detail MATERIAL: CAT. NO. OF BATTERY Mounting Detail NO. C H L CELLS REFERENCE Base: PBT, UL Rated 94V-0 .055 [1.4] DIA (2) PLS. Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate 105 .064 (1.6) .335 (8.5) .805 (20.5) (1) 2430 .620 .405 .055 [1.40] [10.3] [15.7] DIA. (2) PLS. Operating Temperature: -60°F to +293°F (-50°C to +145°C) (1) 2450 CR2430, CL2430, 1025 .074 (1.9) .452 (11.5) .805 (20.5) .185 [4.7] (2) 2430 BR2450, CR2477 .136 [3.45] DIA. (1) 2477 CAT. NO. BATTERY REFERENCE .162 .810 L C 1025-7 .074 (1.9) .503 (12.8) .805 (20.5) [4.2] [20.6] (2) 2430 1068 (1) CR2450, (1) CL2450 24mm TOP Loading AVAILABLE ON TAPE AND REEL • Battery “Pop-in” • Polarized holder .974 [24.8] I.D. from Top for compact • Low profile for densely designs 1.292 [32.8] packed PCB’s 1.053 • No tools required .425 [10.8] • Compatible with vacuum [26.8] • Finger pressure O.D. and mechanical pick & .630 battery release .138 [3.5] place systems [16.0] Thru Hole Mount 1.155 [29.4] • Conductive carrier tape Surface Mount .374 [9.5] meets ANSA/EIA- 481 1.059 [26.9] standard .294 .016 .008 [7.47] [0.20] [0.41] .035 [.89] L MATERIAL: .150 [3.2] 1.433 [36.4] Base: LCP, UL Rated 94V-0 MIN MATERIAL: Mounting Detail Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate Contacts: Phosphor Bronze, Nickel Plate Operating Temperature: -60°F to +293°F (-50°C to +145°C) .055 [1.4] DIA Mounting Detail Base: High Temp Nylon 46, UL Rated 94V-0 (2) PLS. .433 .111 [2.8] MIN. CAT. NO. ON TAPE [11.0] Operating Temperature: -60°F to +293°F (-50°C to +145°C) BULK & REEL BATTERY REFERENCE .276 .138 [3.5] MIN. [7.0] CAT. BATTERY 1052 1052TR (1) CR2450 NO. L C REFERENCE OPTIONAL ADHESIVE ZONE Tape & Reel Spec’s: 56mm wide; 24mm pitch; L C 1053 .788 (20.0) .048 (1.2) (1) CR2450 1.433 [36.4] MIN. 13 inch reel, (250 pieces per reel) 1.187 MATERIAL: 30mm [30.1] I.D. Contacts: .020 (.50) Spring Steel, Tin-Nickel Plate NEG 1.297 Base: PBT, UL Rated 94V-0 + Mounting Detail [32.9] Operating Temperature: -60°F to +293°F .055 [1.4] DIA .062 [1.57] DIA. LEG (2) PLS. (-50°C to +145°C) (3) PL ON .953 [24.2] CIRCLE DIA. 1.425 [36.2] Thru Hole Mount .335 [8.5] CAT. NO. BATTERY REFERENCE .187 [4.8] .807 .070 .050 [1.27] [20.5] [1.77] 301 BR3032 .807 [20.5] .045 [1.14] ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 5 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED THRU HOLE (THM) & SURFACE MOUNT (SMT) BUTTON CELL RETAINERS Economical and reliable SMT and THM coin cell retainers specifically designed for miniature electronic applications with limited board space. • Available in Thru Hole Mount (THM) or Surface Mount • THM legs maintain relative position during and after soldering • Retains battery securely to withstand shock and vibration (SMT) configurations • Ideally suited for High Density packaging • Solder tail located outside of retainer body which facilitates • SMT solder tail with “flow-hole” design for increased joint strength • Reliable spring tension assures low contact resistance visual inspection of the solder joints 4.8 mm AVAILABLE ON TAPE AND REEL STAMP (+) STAMP (+) AS SHOWN AS SHOWN .116 [3.0] .157 [4.0] .100 [2.5] .157 [4.0] Thru Hole Mount .137 Surface Mount .065 [1.7] [3.5] .202 [5.1] MATERIAL: .006 (.15) Phosphor Bronze, Mounting Detail .202 [5.1] MATERIAL: .006 (.15) Gold Plate (Flash) Mounting Detail .030 Phosphor Bronze, Tin-Nickel Plate NEG. CONTACT (PAD) .038 .315 .060 [1.5] SQR. MIN [0.8] CAT. NO. ON TAPE BATTERY NEG. CONTACT (PAD) .196 [1.0] [8.0] .060 [1.5] SQR. MIN .065 [1.7] BULK & REEL REFERENCE .100 [2.5] CAT. BATTERY [5.0] .060 NO. REFERENCE .047 2994 2994TR ML414 [1.5] .196 [1.2] .315 [8.0] [5.0] 2995 ML414 Tape & Reel Spec’s: 16mm wide; 8mm pitch; 13 inch reel (1500 pieces per reel) DIA. AVAILABLE ON TAPE AND REEL 6.8 mm R.032 [R0.8] .315 .158 [4.0] .315 [8.0] [8.0] STAMP (+) Surface Mount Thru Hole Mount STAMP (+) .060 [1.5] AS SHOWN AS SHOWN .315 [8.0] .315 [8.0] .125 [3.2] .215 .120 [3.0] [5.5] .421 [10.7] .380 MATERIAL: .010 (.25) Phosphor Bronze .062 [1.6] [9.7] Mounting Detail Mounting Detail MATERIAL: .010 (.25) CAT. NO. ON TAPE NEG. CONTACT (PAD) Phosphor Bronze, Tin-Nickel Plate BULK FINISH BATTERY REFERENCE NEG. CONTACT (PAD) & REEL .156 [4.0] SQR. MIN. .156 [4.0] SQR. MIN. 2998 2998TR Tin-Nickel .200 CAT. BATTERY MC621, V364, SC621, DR13H, V13AT [5.1] .073 3098 3098TR Matte Tin .070 NO. REFERENCE .315 [1.9] [1.8] .440 [11.2] [8.0] DIA. 2999 MC621, V364, SC621 Tape & Reel Spec’s: 24mm wide; 12mm pitch; 13 inch reel (1000 pieces per reel) STAMP (+) 7.9 mm AVAILABLE ON TAPE AND REEL AS SHOWN .052 [1.3] DIA. .249 [6.3] STAMP (+) .125 [3.2] AS SHOWN .249 .346 [8.8] [6.3] .125 [3.2] Surface Mount Thru Hole Mount MATERIAL: .010 (.25) Phosphor Bronze, Mounting Detail .225 [5.7] .320 [8.1] Gold Plate (Flash) Mounting Detail .346 [8.8] MATERIAL: .010 (.25) NEG. CONTACT (PAD) Phosphor Bronze, Tin-Nickel Plate .125 [3.2] SQR. MIN. .030 [0.8] NEG. CONTACT (PAD) CAT. NO. ON TAPE BATTERY .038 .225 [5.7] .125 [3.17] SQ. MIN. .125 [3.2] .336 [1.0] BULK & REEL REFERENCE CAT. BATTERY .047 [1.2] [8.5] .080 [2.0] DIA. .526 [13.4] 2988 2988TR Size 13, DA13, AZ13E NO. REFERENCE .526 [13.4] 2989 Size 13, DA13, AZ13E .336 [5.53] Tape & Reel Spec’s: 24mm wide; 12mm pitch; 13 inch reel (800 pieces per reel) AVAILABLE ON TAPE AND REEL 9 - 10 mm STAMP (+) STAMP (+) AS SHOWN AS SHOWN .062 [1.6] .339 DIA. [8.6] .180 [4.6] .339 Surface Mount .138 [3.5] Thru Hole Mount [8.6] .418 [10.6] .116 [3.0] .418 [10.6] .195 [5.0] .116 [3.0] .482 .062 MATERIAL: .006 (.15) Phosphor Bronze, [12.2] [1.6] Tin-Nickel Plate .634 [16.1] Mounting Detail Mounting Detail MATERIAL: .006 (.15) CAT. NO. ON TAPE BATTERY Phosphor Bronze, Tin-Nickel Plate BULK & REEL FINISH REFERENCE NEG. CONTACT (PAD) .138 NEG. CONTACT (PAD) .156 [4.0] SQR. MIN. .156 [4.0] SQR. MIN. [3.5] 3030 3030TR Tin-Nickel CAT. BATTERY CR927, CR1025 NO. REFERENCE 3050 3050TR Matte Tin .073 [1.85] .114 [2.9] .418 .634 [16.1] DIA. [10.60] 3031 CR927, CR1025 Tape & Reel Spec’s: 24mm wide; 12mm pitch; 13 inch reel (1500 pieces per reel) AVAILABLE ON TAPE AND REEL .052 11.6 mm [1.3] .475 DIA. [12.1] .265 [6.7] .475 .125 [3.2] [12.1] STAMP (+) Surface Mount Thru Hole Mount STAMP (+) AS SHOWN .265 AS SHOWN .520 [13.2] [6.7] .520 [13.2] .235 .323 [6.0] .235 [8.2] [6.0] .062 MATERIAL: .010 (.25) Phosphor Bronze .585 [14.9] .700 [17.8] [1.6] Mounting Detail Mounting Detail CAT. NO. ON TAPE BATTERY NEG. CONTACT (PAD) MATERIAL: .010 (.25) Phosphor Bronze, Tin-Nickel Plate BULK & REEL FINISH REFERENCE NEG. CONTACT (PAD) .156 [4.0] SQR. MIN. .156 [4.0] SQR. MIN. 2996 2996TR Tin-Nickel SR44, LR44, 357, MS76, CAT. .072 [1.8] NO. BATTERY REFERENCE 3096 3096TR Matte Tin PX76A, G-13, 303, V313 .520 .125 [3.2]SQR. DIA. [13.2] .700 [17.8] 2997 SR44, LR44, 357, MS76, PX76A, G-13, 303, V313 Tape & Reel Spec’s: 32mm wide; 16mm pitch; 13 inch reel (600 pieces per reel) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 6 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED 4 mm to 12 mm BUTTON CELL RETAINERS 12mm to 24mm COIN CELL RETAINERS THRU HOLE (THM) & SURFACE MOUNT (SMT) COIN CELL RETAINERS AVAILABLE ON TAPE AND REEL Battery retainers are suited for high density PCB packaging. Engineered with reliable spring tension, these contacts assure low resistance while firmly securing the battery within the retainer. • Compatible with all wave and reflow operations • Solder tails located outside of retainer body which facilitates visual inspection of the solder joints • Flow-hole solder tail designed for increased joint strength Insulated retainers available for • Compatible with most vacuum and mechanical pick & place assembly systems 6 volt applicatins. See page 4. • Matte Tin Plate for lower soldering temperatures ideal where other temperature sensitive components are being used • Tin-Nickel plated retainers are ideal for lead free, high temperature soldering applications SURFACE MOUNT (SMT) • All conductive polystyrene carrier tape meets ANSI/EIA-481 standards FLOW HOLE/SLOT Mounting Detail Mounting Detail NEG. CONTACT (PAD) NEG. CONTACT (PAD) * .156 [3.96] SQ. MIN. .156 [3.96] SQ. MIN. F L L F MIN. B B .073 [1.85] A DIA. (2) PLS G MIN. POLARITY POLARITY W MIN. MARKING MARKING A A H E THRU HOLE MOUNT (THM) SURFACE MOUNT (SMT) H W .062 [1.6] W MATERIAL: .010 (.25) Phosphor Bronze TIN-NICKEL PLATE MATTE TIN PLATE REFER TO SURFACE MOUNT (SMT) DRAWING CAT. NO. ON TAPE CAT. NO. ON TAPE CELL BATTERY BULK & REEL BULK & REEL AB F G H L WDIA. REFERENCE TAPE & REEL SPEC’S 3000 3000TR 3080 3080TR .520 (13.2) .265 (6.7) .125 (3.2) .125 (3.2) .125 (3.2) .475 (12.1) .745 (18.9) 12mm CR1216, BR1220, CL1225 32mm wide; 16mm pitch; 1000/reel BR1612, CR1616, CR1620, 3012 3012TR 3092 3092TR .664 (16.9) .344 (8.7) .125 (3.2) .125 (3.2) .156 (4.0) .594 (15.1) .914 (23.2) 16mm 44mm wide; 24mm pitch; 600/reel DL1632 3028 3028TR 3038 3038TR .831 (21.1) .298 (7.6) .200 (5.1) .050 (1.3) .067 (1.7) .618 (15.7) .911 (23.1) 20mm BR2012, CR2012, DL2012 44mm wide; 24mm pitch; 1000/reel 3026 3026TR 3078 3078TR .831 (21.1) .416 (10.6) .200 (5.1) .200 (5.1) .085 (2.2) .782 (19.9) 1.210 (30.7) 20mm BR2016, CR2016, DL2016 44mm wide; 32mm pitch; 750/reel 3034 3034TR 3044 3044TR .835 (21.2) .291 (7.4) .200 (5.1) .050 (1.3) .160 (4.1) .635 (16.1) 0.915 (23.1) 20mm DL2020, CR2025, CR2032 44mm wide; 24mm pitch; 500/reel 3002 3002TR 3082 3082TR .831 (21.1) .416 (10.6) .200 (5.1) .200 (5.1) .156 (4.0) .782 (19.9) 1.210 (30.7) 20mm DL2020, CR2025, CR2032 44mm wide; 24mm pitch; 500/reel BR2320, CL2325, CR2330, 3004 3004TR 3084 3084TR .939 (23.9) .475 (12.1) .200 (5.1) .200 (5.1) .156 (4.0) .832 (21.1) 1.339 (34.0) 23mm 56mm wide; 32mm pitch; 400/reel DL2335 3010 3010TR 3090 3090TR .939 (23.9) .475 (12.1) .200 (5.1) .200 (5.1) .240 (6.1) .819 (20.8) 1.339 (34.0) 23mm CR2354, DL2354 56mm wide; 32mm pitch; 200/reel 3032 3032TR 3042 3042TR 1.000 (25.4) .313 (8.0) .200 (5.1) .050 (1.3) .067 (1.7) .681 (17.3) 1.080 (27.4) 24mm BR2412, CR2412 44mm wide, 24mm pitch, 1000/reel 3006 3006TR 3086 3086TR 1.000 (25.4) .506 (12.9) .200 (5.1) .200 (5.1) .156 (4.0) .918 (23.3) 1.400 (35.6) 24mm CR2430, DL2430 56mm wide; 32mm pitch; 400/reel 3008 3008TR 3088 3088TR 1.000 (25.4) .506 (12.9) .200 (5.1) .200 (5.1) .230 (5.8) .890 (22.6) 1.400 (35.6) 24mm CR2450, DL2450 56mm wide; 32mm pitch; 200/reel TIN-NICKEL PLATE REFER TO THRU HOLE MOUNT (THM) DRAWING CAT. NO. CELL BULK A B E H L W DIA. BATTERY REFERENCE 3001 .520 (13.2) .265 (6.7) .210 (5.3) .118 (3.0) .475 (12.1) .585 (14.9) 12mm BR1216, CR1216, BR1220, CL1220, CR1220, BR1225 3013 .664 (16.9) .344 (8.7) .265 (6.7) .156 (4.0) .594 (15.1) .723 (18.4) 16mm BR1616, CR1612, CR1616, CR1620, CR1632 3029 .831 (21.1) .298 (7.6) .176 (4.5) .067 (1.7) .618 (15.7) .890 (22.6) BR2012, CR2012, DL2012 3027 .831 (21.1) .416 (10.6) .194 (4.9) .085 (2.2) .782 (19.9) .890 (22.6) 20mm BR2016, CR2016, DL2016 3003 .831 (21.1) .416 (10.6) .265 (6.7) .156 (4.0) .782 (19.9) .890 (22.6) BR2016, DL2020, CR2320, CR2025, CR2032 3005 .939 (23.9) .475 (12.1) .265 (6.7) .156 (4.0) .832 (21.1) 1.004 (25.5) BR2320, CL2330, CR2320, BR2325, CR2325, DL2325 23mm 3011 .939 (23.9) .475 (12.1) .351 (8.9) .240 (6.1) .819 (20.8) 1.004 (25.5) CR2354, DL2354 3033 1.000 (25.4) .313 (8.0) .176 (4.5) .067 (1.7) .681 (17.3) 1.055 (26.8) BR2412, CR2412 3007 1.000 (25.4) .506 (12.9) .265 (6.7) .156 (4.0) .918 (23.3) 1.055 (26.8) CR2430, DL2430 24mm 3009 1.000 (25.4) .506 (12.9) .350 (8.9) .230 (5.8) .890 (22.5) 1.059 (26.9) CR2450, DL2450 THRU HOLE MOUNT (THM) 3039 1.000 (25.4) .506 (12.9) .450 (11.4) .336 (8.5) .890 (22.5) 1.059 (26.9) CR2477, DL2477 NEGATIVE BATTERY CONTACTS* AVAILABLE ON TAPE AND REEL • Snap-In COMPACT SPRING CONTACT • Assures proper .105 [2.7] contact .062 [1.54] .112 [2.8] .016 [.41] Thru Hole Mount • Assures proper • Assures proper .212 [5.4] contact .031 [.78] DIA (3) PLS contact Pad Layout L .625 [15.9] Pad Layout .062 .250 [6.4] DIA. .127 [3.2] [1.57] .112 [2.7] DIA. MIN. SQR. .308 [7.8] L MIN. .030 [.76] DIA. .360 [9.1] .625 [15.9] .128 [3.3] .079 DWG. 1 MATERIAL: .008 (.20) Brass DWG. 2 MATERIAL: .010 (.25) Phospher Bronze [2.01] .373 [9.5] .062 [1.57] TIN-NICKEL PLATE MATTE TIN PLATE CAT. NO. ON TAPE CAT. NO. ON TAPE Mounting Detail MATERIAL: BULK & REEL BULK & REEL DWG. L DIA. TAPE & REEL SPECS .008 (.20) Phosphor .300 [7.6] 2991 2991TR 2981 2981TR 1 .368 (9.4) .250 (6.4) 16mm wide, 8mm pitch, 1500/7 reel Bronze, Tin-Nickel Plate 2992 2992TR 2982 2982TR 1 .289 (7.4) .186 (4.7) 16mm wide, 12mm pitch, 1000/7 reel .073 [1.9] DIA. (2) PLS CAT. NO. 2990 2993 2993TR 2983 2983TR 2 .625 (15.9) — 24mm wide, 16mm pitch, 1000/13 reel *Note: Cannot be used with Cat. No. 3028, 3029, 3032, 3033. ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 7 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SURFACE MOUNT BATTERY CLIPS/CONTACTS AVAILABLE ON TAPE AND REEL • “Flow-Hole” SMT solder tail design for increased joint strength • Matte Tin Plate for lower soldering temperatures ideal where other temperature • Tin-Nickel plating is ideal for lead free, high temperature soldering sensitive components are being used Refer to page 32 for Battery Contact Layout & Mounting Details “AAAA” • “A27” .250 [6.4] .093 [2.36] .055 [1.39] .047 [1.19] .124 [3.2] .064 [1.63] DIA. .187 [4.8] .187 [4.8] MATERIAL: .010 (.25) Spring Steel Pad Layout .320 .266 .192 [6.8] [8.1] TIN-NICKEL PLATE MATTE TIN PLATE [4.9] .360 [9.1] CAT. NO. ON TAPE CAT. NO. ON TAPE .124 MIN. .226 [5.7] .320 [8.1] [3.2] BULK & REEL BULK & REEL MIN. .400 [10.2] 50 50TR 550 550TR Tape & Reel Spec’s: 24mm wide; 16mm pitch; 13 inch reel, (500 pieces per reel) “AAA” • “N” • “A23” .092 [2.34] DIA. .092 [2.33] .092 [2.34] .200 [5.1] .200 [5.1] .047 [1.19] DIA. .092 [2.34] .047 [1.19] .250 DIA. HOLE .250 .250 [6.4] DIA. HOLE .040 [6.4] [6.4] [1.02] .040 [1.02] .396 [10.0] .497 .498 [12.7] .215 [5.48] [12.6] .258 [6.6] .156 [3.96] (2) PLS .296 .613 [15.6] [7.5] .156 [4.0] MATERIAL: .010 (.25) Spring Steel .671 [17.0] Pad Layout Pad Layout MATERIAL: .010 (.25) Spring Steel TIN-NICKEL PLATE MATTE TIN PLATE .156 [4.0] .092 CAT. NO. ON TAPE CAT. NO. ON TAPE .156 [4.0] TIN-NICKEL PLATE MATTE TIN PLATE .092 MIN. TYP. [2.34] MIN. TYP. [2.34] BULK & REEL BULK & REEL CAT. NO. ON TAPE CAT. NO. ON TAPE MIN. .200 [5.1] MIN. .200 [5.1] MIN. 56 56TR 556 556TR MIN. BULK & REEL BULK & REEL .671 [17.0] MIN. Tape & Reel Spec’s: 32mm wide; 20mm pitch; .613 [15.6] MIN. 55 55TR 555 555TR 13 inch reel, (250 pieces per reel) Tape & Reel Spec’s: 32mm wide; 16mm pitch; 13 inch reel, (300 pieces per reel) “AA” • “CR2” • “A” .047 [1.19] DIA. .092 [2.34] DIA. .092 [2.33] .200 [5.1] .200 [5.1] .092 [2.3] .047 [1.19] .092 [.2.34] DIA. HOLE DIA. HOLE .250 [6.4] .250 [6.4] .312 [7.9] .040 [1.02] .050 [1.27] .466 [11.8] .285 [7.2] .593 [15.06] .569 [14.4] .359 [9.1] .156 [4.0] (2) PLS .613 [15.6] .369 [9.4] .156 [4.0] TYP. MATERIAL: .012 (.30) Spring Steel MATERIAL: .010 (.25) Spring Steel .662 [16.8] Pad Layout TIN-NICKEL PLATE MATTE TIN PLATE Pad Layout TIN-NICKEL PLATE MATTE TIN PLATE CAT. NO. ON TAPE CAT. NO. ON TAPE CAT. NO. ON TAPE CAT. NO. ON TAPE .156 [4.0] .156 [4.0] .092 .092 BULK & REEL BULK & REEL BULK & REEL BULK & REEL MIN. TYP. MIN. TYP. [2.34] [2.34] MIN. 57 57TR 557 557TR MIN. 53 53TR 553 553TR .200 [5.1] .200 [5.1] MIN. MIN. Tape & Reel Spec’s: 32mm wide; 24mm pitch; Tape & Reel Spec’s: 32mm wide; 20mm pitch; .662 [16.8] MIN. .613 [15.6] MIN. 13 inch reel, (150 pieces per reel) 13 inch reel, (250 pieces per reel) SURFACE MOUNT LEAF-SPRING CONTACTS AVAILABLE ON TAPE AND REEL • Economical & reliable contacts are ideal for surface mount applications • Reliable spring tension contacts assure low contact resistance • Unique spring tension contacts adjust to variations in battery length • SMT solder tail with “flow-hole” design for increased joint strength “AAA” • “AAAA” • “12V” • “N” “AA” • “CR2” •“A” • “9V” .300 [7.6] .300 [7.6] .200 [5.1] .300 [7.6] .435 .270 [11.0] .545 [6.9] .388 REF. [13.8] REF. [9.9] .098 [2.5] DIA. .098 [2.5] DIA. .200 .200 [5.1] [5.1] MATERIAL: .010 (.25) Spring Steel MATERIAL: .010 (.25) Spring Steel .109 [2.8] .109 [2.8] TIN-NICKEL PLATE MATTE TIN PLATE TIN-NICKEL PLATE MATTE TIN PLATE CAT. NO. ON TAPE CAT. NO. ON TAPE CAT. NO. ON TAPE CAT. NO. ON TAPE BULK & REEL BULK & REEL BULK & REEL BULK & REEL 5230 5230TR 5330 5330TR 5231 5231TR 5331 5331TR Tape and Reel Spec’s: 24mm wide; 12mm pitch; 13 inch reel (400 pieces per reel) Tape and Reel Spec’s: 32mm wide; 16mm pitch; 13 inch reel (250 pieces per reel) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 8 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SURFACE MOUNT BATTERY CLIPS & CONTACTS THRU HOLE MOUNT BATTERY CONTACTS PC BATTERY CLIPS • Mounts securely to the PC board with advanced “Snap-In” design for thru hole mounting • Reliable spring tension assures low contact resistance • Low profile, economical design • Retains battery securely to withstand shock and vibration • AAAA, AAA, AA, N, 12V, 2/3A, 17-19mm Refer to page 33 for Battery Contact Layout & Mounting Details “AAAA” • “A27” “AAA” • “N” • “A23” • “AA” • “CR2” “A” • 17–19mm* B B A .062 B A A [1.6] .094 .062 DIA. [2.4] [1.6] H C DIA. .062 [1.6] .155 [3.9] (3) PLS .120 L L .047 [1.2] [3.0] L .062 [1.57] .200 [5.1] .375 .320 [8.1] .070 [1.8] FRONT LEGS .512 W [9.5] W W [13.0] *17335, 17450, 17500, 17650, 18600, 18650 cells FIG. 1 FIG. 2 FIG. 3 MATERIAL: Spring Steel, Tin-Nickel Plate CAT. BATTERY BATTERY MATERIAL NO. FIG. SIZE DIAMETER A B C D H L W THICKNESS 51 1 .300-.350 (7.6-8.9) .187 (4.8) .187 (4.8) .194 (4.9) — .320 (8.1) .214 (5.4) .226 (5.7) .010 (.25) “AAAA” • “A27” 82 2 “AAA”• “N” • “A23” .375-.460 (9.5-11.7) .250 (6.4) .250 (6.4) .280 (7.1) .040 (1.0) .498 (12.7) .228 (5.8) .296 (7.5) .010 (.25) 52 2 No Ears .250 (6.4) — .280 (7.1) .032 (0.8) .498 (12.7) .228 (5.8) .250 (6.4) .010 (.25) “AA”•“CR2” 92 2 “AA” • “CR2” .531-.665 (13.5-16.9) .312 (7.9) .250 (6.4) .359 (9.1) .050 (1.3) .593 (15.1) .228 (5.8) .369 (9.4) .012 (.30) 2915 2 “AA” • “CR2” .531-.665 (13.5-16.9) .312 (7.9) .250 (6.4) .359 (9.1) .050 (1.3) .593 (15.1) .228 (5.8) .376 (9.5) .015 (.38) 54 3 “A” • 17-19mm* .669-.748 (17.0-19.0) .350 (8.9) .375 (9.5) .385 (9.8) .062 (1.6) .653 (16.6) .300 (7.6) .438 (11.1) .012 (.30) *Battery Reference: 2/3A,17335,17450,17500,17650,18500,18650 cells P.C. BUTTON & SPRING CONTACTS • Space saving design installs directly onto the PC board • Suitable for .062 (1.57) to .093 (2.36) PC boards • Reliable spring tension assures low contact resistance • Ideal for self-contained battery compartments COIL SPRING “AAA” • “AA” • “N” • “A23” “CR2” • “AA” (+) POSITIVE BUTTON (-) NEGATIVE SPRING (+) POSITIVE BUTTON (-) NEGATIVE SPRING .410 .338 .015 [0.4] .380 [9.7] .265 [6.7] .156 [4.0] .210 .015 [0.4] .410 [10.4] [10.4] [8.6] [5.3] DIA. .380 [9.7] .380 [9.7] .550 [14.0] .550 .190 [4.8] .190 [4.8] .350 [8.9] [14.0] .350 [8.9] .175 .180 [4.6] [4.5] .180 [4.6] .120 [3.0] DIA. .062 .120 [3.0] .290 .055 [1.4] .290 .265 .100 [2.5] .100 [2.5] [1.6] .156 [7.4] (3) PLS [7.4] [6.7] (3) PLS (3) PLS (3) PLS [4.0] MATERIAL: MATERIAL: MATERIAL: MATERIAL: Frame: .015 (.38) Frame: .015 (.38) Steel, Frame: .015 (.38) Steel, Frame: .015 (.38) Steel, Tin-Nickel Plate Matte Tin Plate Tin-Nickel Plate Steel,Matte Tin Plate CAT. NO. 595 CAT. NO. 628 CAT. NO. 637 CAT. NO. 629 LEAF SPRING MATERIAL: .010 (.25) Spring Steel, Tin-Nickel Plate MATERIAL: .012 (.30) Spring Steel, Tin-Nickel Plate “AA” • “CR2” • “A” “AAA” • “N” • “A23” .200 [5.1] .360 .200 [5.1] .160 [4.1] .015 [0.4] .360 .015 [0.4] [9.1] .250 .160 [4.1] .360 .360 [9.1] REF. .232 [9.1] REF. [6.4] [9.1] [5.9] .202 [5.1] DIA. .325 [8.2] .450 [11.4] DIA. REF. .275 [7.0] REF. .350 [8.9] .350 [8.9] .450 [11.4] .200 [5.1] .150 [3.8] .416 .150 [3.8] .150 [3.8] .416 [10.6] .045 [1.1] .045 [1.1] .250 [10.6] .250 REF. .250 .416 .045 [1.1] [6.3] .416 REF. .250 [6.3] [10.6] .045 [1.1] [6.3] [10.6] REF. [6.3] REF. CAT. NO. 596 CAT. NO. 590 CAT. NO. 597 CAT. NO. 591 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 9 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED D D H C H C RUGGED STEEL BATTERY CLIPS “AA” • “C” • “D” Refer to page 32 for Battery Contact Layout & Mounting Details SPECIFICATIONS Clips: Spring Steel, Nickel Plate Contact Eyelets: Brass, Nickel Plate Insulating Washers: Moisture Proof, Resin Impregnated Fibre Solder Lugs: Brass, Tin Plate • Available with insulated or non-insulated contact. Positive contact grips battery securely. G .050 J 86 G J .070 87 [1.27] 89 [1.78] 88 99 100 H D H D F F M B BM .437 [11.1] .437 [11.1] SOLDER LUG .093 [2.4] .093 [2.36] .098 [2.5] .098 [2.5] DIA. (2) PLS DIA. (2) PLS DWG. 1 DWG. 2 .144 [3.7] Non-Insulated Contact .144 [3.7] Insulated Contact DIA. DIA. EAR FOR SOLDERING CAT. DWG. STEEL BATTERY DIAMETER CELL NO. NO. B D F G H J M THICKNESS MIN. - MAX. SIZE 86 1 .703 (17.9) .812 (20.6) .593 (15.1) .375 (9.5) .937 (23.8) .500 (12.7) .605 (15.4) .020 (.51) .875 to 1.125 (22.2 to 28.6) “C” 87 2 88 2 .775 (19.7) 1.075 (27.3) .750 (19.1) .437 (11.1) 1.187 (30.1) .500 (12.7) .609 (15.5) .020 (.51) 1.187 to 1.350 (30.1 to 34.3) “D” 89 1 99 1 .703 (17.9) .609 (15.5) .375 (9.5) .375 (9.5) .609 (15.5) .312 (7.9) .353 (9.0) .015 (.39) .531 to .650 (13.5 to 16.5) “AA” 100 2 ECONOMY CONTACTS “AA” • “C” • “D” .062 [1.57] .050 H Refer to page 32 for Battery Contact Layout & Mounting Details DIA. [1.27] H • Designed for mounting in self-contained, non-metallic .050 battery compartments. B [1.27] .120 [3.0] • Reliable spring tension assures low contact resistance. .375 [9.5] C B • Recessed contact holds battery in place. .375 [9.5] .120 [3.1] FIG. 1 C • All clips have anti-rotation tab. .687 [17.5] M .375 [9.5] CAT. FIG. M CELL FIG. 2 NO. NO. B C H MTG. HOLE SIZE M ANTI-ROTATION TAB 206 1 .625 (15.9) .480 (12.2) .500 (12.7) .128 (3.3) “AA” ANTI-ROTATION TAB 207 2 .687 (17.4) .547 (13.9) .875 (22.2) .128 (3.3) “C“ MATERIAL: .016 (.41) Spring Steel, Nickel Plate 208 2 .750 (19.1) .562 (14.3) 1.260 (32.0) .128 (3.3) “D” POLARITY INDICATING LABEL BATTERY SPRING CONTACTS • No Gluing or Wetting Needed • Economical “2/3A” • “AA” • “C” • “D” • Pressure Sensitive Adhesive Back • Adheres To All Surfaces Easy to assemble with eyelets or rivets. Refer to page 142. Recommended where proper polarity of battery insertion or circuit polarity is to be shown. Labels are two color, (+) positive side red; arrow, (-) negative side blue. H A 1.375 [34.9] C B .250 [6.4] (FRONT) CONTACT (BACK) CONTACT CAT. CELL NO. H A B C MATERIAL SIZE .025 (.64) Dia. Spring Steel, 211 .290 (7.4) .335 (8.5) .100 (2.5) .140 (3.6) “2/3 A” • “AA” Nickel Plate .040 (1.0) Dia. Spring Steel, 211-D .850 (21.6) .650 (16.5) .162 (4.1) .300 (7.6) “C” • “D” Nickel Plate CAT. NO. 58 INSULATED POLARIZING WASHERS Prevents improper connection of battery which may cause damage to electronic equipment. Washers hold securely when snapped over eyelets. Used on our standardized battery holders. For “AA”, “C” & “D” cells. CAT. NO. 59 (RED) CAT. NO. 60 (BLACK) MATERIAL: Molded Polyethylene ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 10 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED BATTERY CLIPS, CONTACTS & ACCESSORIES BATTERY & COMPONENT CLIPS ALUMINUM & STEEL CLIPS Precision made spring clips are available in a wide range of sizes. These clips will hold round, square and rectangular batteries or components with similar dimensions. Clips are manufactured from Aluminum or Spring Steel. 217 218 219 94 220 80 97 221 95 98 90 91 93 78 67 69 70 71 79 222 DIA. DIA. DIA. DIA. DIA. H H H H H L L L .625 1.125 L [15.9] L [28.6] .437 .437 W .437 .437 [11.1] W W W W [11.1] [11.1] [11.1] M M M M M DWG. 1 DWG. 2 DWG. 3 DWG. 4 DWG. 5 MATERIAL: Steel Clips: Spring Steel, Nickel Plate Aluminum Clips: 2024-T3 CAT. DWG. NO. NO. REF: CELL SIZE/BATTERTY DIA. (SQ.) H L W M MATERIAL “AAA” CELL 90 1 .375 to .468 (9.5 to 11.9) .453 (11.5) .312 (7.9) .625 (15.9) .098 (2.5) .020 (.51) Alum. “AA”, “CR2” CELL 91 1 .562 (14.3) .406 (10.3) .625 (15.9) .098 (2.5) .020 (.51) Alum. .531 to .656 (13.5 to 16.7) 69 4 .562 (14.3) 1.125 (28.6) .625 (15.9) .098 (2.5) .015 (.39) Steel “C” CELL 222 1 .921 (23.4) .937 (23.8) .625 (15.9) .098 (2.5) .020 (.51) Steel 93 1 .875 to 1.125 (22.2 to 28.6) .921 (23.4) .937 (23.8) .625 (15.9) .098 (2.5) .020 (.51) Alum. 97* 5 1.125 (28.6) 2.062 (52.4) .625 (15.9) .098 (2.5) .020 (.51) Alum. “D” CELL 94 3 1.218 (30.9) 1.250 (31.8) .625 (15.9) .098 (2.5) .032 (.81) Alum. 78 2 1.187 to 1.375 (30.1 to 34.9) 1.218 (30.9) .562 (14.3) .500 (12.7) .136 (3.5) .020 (.51) Steel 98 5 1.437 (36.5) 2.656 (67.5) 1.000 (25.4) .098 (2.5) .032 (.81) Alum. “A”, “2/3A” CELL 70 4 .656 to .690 (16.7 to 17.0) .740 (18.8) 1.343 (34.1) .625 (15.9) .098 (2.5) .025 (.64) Alum. “9” VOLT CELL 71 3 .593 (15.1)
1.031 (26.2) .687 (17.4) 1.031 (26.2) .625 (15.9) .098 (2.5) .015 (.39) Steel 79 4 .650 (16.5)
1.043 (26.5) .765 (19.4) 1.050 (26.7) .625 (15.9) .098 (2.5) .015 (.39) Steel 66 3 .689 (17.5)
1.043 (26.5) .825 (21.0) 1.069 (27.2) .625 (15.9) .098 (2.5) .015 (.39) Steel 80 3 .650 (16.5)
1.043 (26.5) 1.187 (30.1) .675 (17.1) .625 (15.9) .098 (2.5) .015 (.39) Steel 95 3 .650 (16.5)
1.043 (26.5) 1.125 (28.6) .656 (16.7) .625 (15.9) .098 (2.5) .020 (.51) Alum. “NiCd” CELL 217 2 1.375 to 1.500 (34.9 to 38.1) 1.430 (36.3) 1.218 (30.9) .812 (20.6) .157 (4.0) .025 (.64) Steel 218 2 1.437 to 1.687 (36.5 to 42.8) 1.531 (38.9) 1.375 (34.9) .812 (20.6) .157 (4.0) .025 (.64) Steel 219 2 2.000 to 2.500 (50.8 to 63.5) 2.156 (54.8) 1.687 (42.8) .812 (20.6) .157 (4.0) .025 (.64) Steel “SUB-C” CELL 221 2 .859 to .890 (21.8 to 22.6) .906 (23.0) .828 (21) .468 (11.9) .157 (4.0) .020 (.51) Steel *ONLY TWO MOUNTING HOLES BATTERY RETAINER CLIPS • Prevents battery from loosening in “AA” • “CR2” “D” “C” battery holder • Retainer clip slips on the ears of the battery holder clip Used with Keystone Battery Clips Used with Keystone Battery Clips Used with Keystone Cat. No. 91, 92, 95, 99, 100 and 2915. Cat. No. 86, 87, 93 and 222. Battery Clips Cat. No. 88, 89 and 94. MATERIAL: Stainless Steel MATERIAL: Spring Steel, Nickel Plate MATERIAL: Spring Steel, Nickel Plate CAT. NO. 61 CAT. NO. 62 CAT. NO. 63 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 11 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SNAP-ON CONTACTS • Economical and reliable contacts are ideal for molded cases with self contained battery compartments • Solder “ear” to facilitate soldering of wire lead • Unique spring tension contact adjusts to variations in battery length • Reliable spring tension contacts assure low contact resistance • Clips easily onto .060 (1.52) to .070 (1.78) wall • Sharp barbs securely anchor contact in place Refer to page 34 for Battery Contact Layout & Mounting Details “AAA” • “AAAA” • “N” • “12V” .187 .047 .234 [4.6] [1.19] .250 [5.9] .062 REF. [6.4] [1.57] .180 .281 [7.1] [4.6] .338 REF. .322 [8.6] .358 .187 [8.2] [9.1] [4.8] .125 [3.2] .187 [4.8] .011 [.29] DIA. DIA. .109 [2.8] CAT. NO. 204 MATERIAL: .010 (.25) Spring Steel, Nickel Plate CAT. NO. 238 MATERIAL: .010 (.25) Spring Steel, Nickel Plate .660 [16.8] .660 [16.8] .187 [4.8] .410 [10.4] .410 [10.4] REF. .180 .302 [4.6] .338 [7.7] .341 [8.6] .358 .358 [8.7] [9.1] [9.1] .021 [.53] .187 [4.76] DIA. .300 [7.6] .125 [3.18] DIA. .250 [6.4] TYP. CAT. NO. 202 CAT. NO. 294 MATERIAL: .010 (.25) Spring Steel, Nickel Plate MATERIAL: .010 (.25) Spring Steel, Nickel Plate .187 [4.8] .660 [16.8] .187 [4.8] REF. .660 [16.8] REF. .410 [10.4] .021 [.53] .410 [10.4] .021 [.53] .180 .341 .180 .358 [4.6] [8.7] [4.6] .358 .341 [9.1] [8.7] [9.1] .250 [6.4] TYP. .250 [6.4] TYP. CAT. NO. 295 CAT. NO. 296 MATERIAL: .010 (.25) Spring Steel, Nickel Plate MATERIAL: .010 (.25) Spring Steel, Nickel Plate “AA” • “CR2” • “A” .254 .312 .312 [6.5] [7.9] [7.9] .062 [1.57] REF. .062 [1.6] .240 .375 [9.5] [6.1] .450 .476 REF [11.4] .250 [12.1] [6.4] .025 [0.6] .175 [4.4] DIA. CAT. NO. 209 MATERIAL: 012 (.30) Spring Steel, Nickel Plate CAT. NO. 228 MATERIAL: 010 (.25) Spring Steel, Nickel Plate “AA” • The (2) two leaf contacts are separate, allowing a divider between the batteries. .820 [20.8] .570 [14.5] .820 [20.8] .254 .250 .250 [6.5] .240 [6.3] REF. [6.3] .375 [9.5] [6.1] .055 [1.4] .450 REF. .370 [11.4] [9.4] .461 .256 [11.7] .150 [3.8] DIA. .035 [.89] [6.5] .570 [14.5] CAT. NO. 288 CAT. NO. 292 MATERIAL: 012 (.30) Spring Steel, Nickel Plate MATERIAL: 010 (.25) Spring Steel, Nickel Plate The (2) two leaf contacts are held together by a web. • This design offers greater stability. .250 [6.4] .820 [20.8] .250 .250 REF. .820 [20.8] .254 [6.3] [6.3] .027 [0.7] .250 .250 [6.5] [6.3] .055 [1.4] REF. [6.3] .240 [6.1] .449 .256 [11.4] .461 [6.5] .256 [11.7] [6.5] .175 [4.4] DIA. .570 [14.5] .570 [14.5] CAT. NO. 291 Right MATERIAL: .012 (.30) Spring Steel, Nickel Plate MATERIAL: 012 (.30) Spring Steel, Nickel Plate CAT. NO. 210 CAT. NO. 290 Left (shown) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 12 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED BATTERY CONTACTS FOR MOLDED CASES BATTERY CONTACTS FOR MOLDED CASES SLIDE-IN MOUNT CONTACTS Economical and reliable contacts are ideal for molded cases with • self contained battery compartments Solder “ear” to faciltate soldering of wire lead • Unique spring tension contact adjusts to variations in battery lengths • Reliable spring tension contacts assure low contact resistance • Clips easily onto .060 (1.52) to .070 (1.78) wall • Sharp barbs securely anchor contact • Refer to page 34 for Battery Contact Layout & Mounting Details • Press fit into housing groove. “AA” • “CR2” • “A” • “9V” “AA” SERRATED SURFACE SERRATED SURFACE .200 [5.08] .200 [5.1] .875 [22.2] REF. REF. .500 .500 .437 .437 [12.7] [12.7] [11.1] [11.1] REF. REF. .048 .300 .048 .300 [7.6] [1.2] [1.2] [7.6] CAT. NO. 5205 CAT. NO. 5206 MATERIAL: .012 (.30) Spring Steel, Nickel Plate MATERIAL: .012 (.30) Spring Steel, Nickel Plate .944 [24.0] .394 [10.0] .300 [7.6] .826 [21.0] MIN. .276 [7.0] .300 .276 [7.0] [7.6] (2) PLS .060 [1.5] .428 [10.9] .428 REF. .827 [10.9] .551 .394 [21.0] REF. [14.0] .611 .335 [10.0] [15.5] [8.5] .276 .079 [2.01] [7.0] DIA. .062 [1.6] .060 [1.52] DIA. .197 [5.0] .062 [1.6] CAT. NO. 5209 MATERIAL: .012 (.30) Phosphor Bronze, Nickel Plate CAT. NO. 5208 MATERIAL: .012 (.30) Phosphor Bronze, Nickel Plate SLIDE-IN P.C. MOUNT CONTACTS • Economical and reliable contacts • Reliable spring tension assure low contact resistance and dependable connection • Designed for direct placement onto PCB, no wire leads required • Symmetrical design allows these contacts to function both as a positive and • Unique spring tension adjusts to variations in battery length negative contacts UNIVERSAL BATTERY SIZES “AAA” • “AAAA” • “N” • “12V” MATERIAL: .012 (.30) Phosphor Bronze, Tin-Nickel plate .250 .156 [4.0] .250 [6.4] [6.4] .156 .187 [4.7] [4.0] .250 .300 [7.6] [6.3] .220 .265 [6.7] .545 [5.6] .405 [13.8] [10.3] .170 [4.3] .170 [4.3] .030 .038 [.97] .030 [.76] .038 [.97] [.76] •“Off-Board” edge mounting design frees up valuable board space CAT. NO. 1021-1 CAT. NO. 1017-1 •Made from corrosion resistant .187 [4.8] .500 [12.7] Stainless Steel REF. .156 .334 [4.0] [8.5] .343 [8.7] .466 REF. [11.8] .100 [2.5] L .200 .528 [13.4] .025 [0.64] [5.1] .200 .550 .120 [3.1] [5.1] [14.0] .055 [1.39] (2) PLS .720 .350 [18.3] [8.9] .050 [1.26] .050 [1.27] .110 .100 [2.5] .045 [1.14] [2.8] .150 [3.8] .150 [3.8] .300 [7.6] .030 [0.76] .038 [0.97] CAT. NO. (L) Length 109-2 .840 (21.3) MATERIAL: .008 (.20) Spring Steel, MATERIAL: .012 (.30) Spring Steel, MATERIAL: .012 (.30) Stainless CAT. NO. 230-1 109-3 1.000 (25.4) CAT. NO. 108-2 Nickel plate Nickel plate Steel, Tin-Nickel plate Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 13 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SPRING & BUTTON CONTACTS Economical and reliable contacts are ideal for molded cases with self • contained battery compartments “Solder tab” design for either wire lead or PC mounting • Unique spring contacts adjust to variations in battery lengths • Reliable spring contacts assure low contact resistance and a • dependable connection Space saving, economical, excellent mechanical construction • MATERIAL: Refer to page 35 for Battery Contact Layout & Mounting Details Plate: .020 (.51) Steel, Nickel Plate Spring: Spring Steel, Nickel Plate “AAA” • “AAAA” • “N” • “12V” (-) NEGATIVE SPRING (+) POSITIVE BUTTON DUAL CONTACT (RIGHT) .827 [21.0] .295 [7.5] .453 [11.5] .315 .295 .315 .043 [7.5] [8.0] [8.0] .043 [1.09] [1.09] .049 .049 .433 [1.24] .295 .276 .157 .157 [1.24] [11.0] .315 .315 DIA. [4.0] [7.5] [7.01] DIA. [4.0] [8.0] [8.0] .125 .059 .055 [3.2] .177 [4.5] [1.50] .055 .070 [1.78] [1.40] .055 [1.40] DIA. .055 [1.40] DIA. (2) PLS [1.40] .378 [9.6] DIMPLE DIMPLE (2) PLS CAT. NO. 5213 CAT. NO. 5203 CAT. NO. 5225 (-) NEGATIVE SPRING WITH TAB DUAL CONTACT (LEFT) (+) POSITIVE BUTTON WITH TAB .362 [9.2] .334 .362 [9.2] .827 [21.0] .295 [8.5] .197 .409 [7.5] .453 [11.5] [5.0] [10.4] .217 .409 .669 [5.5] [10.4] .217 [17.0] .669 [5.5] .433 [17.0] .032 .276 .295 [11.0] .032 .062 [1.57] DIA. [0.81] [7.0] [7.5] .062 [1.57] DIA. [0.81] .051 [1.30] DIA. .051 [1.30] DIA. .059 [1.50] .059 [1.50] .059 [1.50] .118 [3.0] .177 [4.5] .118 [3.0] .070 [1.78] (2) PLS .378 [9.6] (2) PLS CAT. NO. 5226 CAT. NO. 5204 CAT. NO. 5214 “AA” • “CR2” • “A” (-) NEGATIVE SPRING (+) POSITIVE BUTTON .334 .425 [10.8] .050 [8.5] .425 [10.8] [1.27] .050 [1.27] .055 .055 [1.40] .445 [1.40] DIA. .236 .445 [11.3] .228 DIA. [6.0] [11.3] [5.8] .228 [5.8] .061 .061 [1.55] .062 [1.57] DIA. [1.55] .062 [1.57] DIA. CAT. NO. 5224 CAT. NO. 5202 “AA” DUAL BUTTON CONTACT DUAL SPRING CONTACT .970 [24.6] .970 [24.6] .551 [14.0] .414 [10.5] .551 [14.0] .500 .280 .500 [12.7] [7.1] [12.7] .250 .250 [6.4] [6.4] .100 [2.5] .098 [2.5] DIA. .140 [3.6] .098 [2.5] DIA. (2) PLS (2) PLS CAT. NO. 5227 CAT. NO. 5228 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 14 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED BATTERY CONTACTS FOR MOLDED CASES BATTERY CONTACTS FOR MOLDED CASES SPRING & BUTTON CONTACTS Economical and reliable contacts are ideal for molded cases with • self contained battery compartments “Solder tab” design for either wire lead or PC mounting • Unique spring contacts adjust to variations in battery lengths • Reliable spring contacts assure low contact resistance and • a dependable connection Space saving, economical, excellent mechanical construction • MATERIAL: Plate: .020 (.51) Steel, Nickel Plate Spring: Spring Steel, Nickel Plate Refer to page 35 for Battery Contact Layout & Mounting Details “AA” • “CR2” • “A” (+) POSITIVE BUTTON DUAL CONTACT (“AA” ONLY) (-) NEGATIVE SPRING .057 [1.4] .425 .414 .425 .970 [24.6] [10.8] [10.5] .280 [10.8] .414 [10.5] .551 [14.0] [7.1] .055 .055 DIA. [1.4] [1.40] .500 .500 DIA. DIA. .500 [12.7] .250 [12.7] .250 [12.7] .250 [6.4] [6.4] [6.4] .140 [3.6] .098 [2.5] DIA. .062 [1.57] DIA. .062 [1.57] DIA. CAT. NO. 5222 CAT. NO. 5221 CAT. NO. 5212 Left or Right (-) NEGATIVE SPRING WITH TAB (+) POSITIVE BUTTON WITH TAB DUAL CONTACT (“AA” ONLY) .057 [1.4] .441 .236 .441 .414 [6.0] [11.2] [11.2] .906 [23.0] [10.5] DIA. .551 [14.0] .414 [10.5] .472 .722 [12.0] .275 .472 [18.3] [7.0] [12.0] .472 .275 .722 .295 [12.0] [7.0] [18.3] .728 [7.5] [18.5] .067 [1.70] DIA. .067 [1.70] DIA. .067 [1.70] DIA. .060 [1.52] DIA. .060 [1.52] DIA. .079 [2.00] DIA. .118 .157 [4.0] .118 [3.0] [3.0] CAT. NO. 521O Left CAT. NO. 5201 CAT. NO. 5223 CAT. NO. 5211 Right (Shown) (-) NEGATIVE SPRING WITH TAB/LANCE (+) POSITIVE BUTTON WITH TAB/LANCE DUAL CONTACT WITH TAB (“AA” ONLY) .057 [1.4] .441 .970 [24.6] .441 .414 .414 [10.52] .236 [11.2] [11.2] [10.5] .551 [14.0] [6.0] DIA. .472 .472 .470 [12.0] .275 .295 .275 [11.9] [12.0] .722 .722 .728 [7.5] [7.0] [7.0] [18.5] [18.3] [18.3] .067 [1.70] DIA. .067 [1.70] DIA. .079 [2.00] DIA. .060 [1.52] DIA. .067 [1.70] DIA. .157 [4.0] .118 [3.0] .118 .060 [1.52] DIA. [3.0] CAT. NO. 5218 Left CAT. NO. 5220 CAT. NO. 5219 CAT. NO. 5217 Right (Shown) Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 15 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SPRING & BUTTON CONTACTS Economical and reliable contacts are ideal for molded cases with self • contained battery compartments ”Solder tab” design for either wire lead or PC mounting • Unique spring contacts adjust to variations in battery lengths • Reliable spring contacts assure low contact resistance and a • dependable connection Space saving, economical, excellent mechanical construction • MATERIAL: Plate: .020 (.51) Steel, Nickel Plate Spring: Spring Steel, Nickel Plate Refer to page 35 for Battery Contact Layout & Mounting Details “C” CELL (+) POSITIVE BUTTON (-) NEGATIVE SPRING .750 [19.0] .750 [19.0] .062 [1.57] .646 [16.41 .061 .061 [1.55] [1.55] .433 .750 DIA. .750 [11.0] DIA. [19.0] [19.0] .062 [1.57] .062 [1.57] DIA. DIA. CAT. NO. 5240 CAT. NO. 5241 DUAL CONTACT 1.654 [42.0] .646 .984 [25.0] [16.4] .750 [19.0] .375 [9.5] .098 [2.5] DIA. CAT. NO. 5242 “D” CELL (+) POSITIVE BUTTON (-) NEGATIVE SPRING .847 [21.50] .728 [18.5] .728 [18.5] .059 [1.50] .059 [1.50] .610 [15.5] .610 [15.5] .392 .394 [10.0] [10.0] .295 .905 .905 [7.5] [23.0] [23.0] 1.260 1.260 [32.0] [32.0] R.492 [R12.5] R.492 [R12.5] .059 [1.50] DIA .059 [1.50] DIA .165 [4.2] .165 [4.2] .157 [4.0] .157 [4.0] CAT. NO. 5250 CAT. NO. 5251 DUAL CONTACT 2.224 [56.5] .847 [21.5] 1.319 [33.5] .413 [10.5] 1.087 [27.6] CAT. NO. 5253 Left CAT. NO. 5252 Right (Shown) Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 16 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED BATTERY CONTACTS FOR MOLDED CASES “18650” LITHIUM-ION BATTERY HOLDERS “18650” LITHIUM-ION BATTERY HOLDERS “18650” CELL NOTE: PC Mount Battery Clip Available See Page 9. FEATURES APPLICATIONS • Low profile surface mount holder for Cylindrical • Securely holds battery in place • Computer memory, power backup systems Lithium and alkaline batteries • Polarity clearly marked for orientation • Digital readers • UL 94V-0 heat resistant nylon housing well • Accomodates cells with or without built-in PCB • Laptop and touch pad computers suited for reflow soldering protection circuits • PLC and industrial controls • Battery installation and removal does not Operating Temp Range: require tools -60ºF to +290ºF (-50ºC to +145ºC) THRU HOLE MOUNT SURFACE MOUNT SINGLE CELL 3.034 [77.1] 3.386 [86.0] 3.034 [77.1] D .813 2.710 [68.9] [20.7] .130 [3.3] .813 .709 [18.0] 2.710 [68.9] [20.7] .130 [3.3] .630 .140 [3.6] 2.175 [55.2] .709 [18.0] [16.0] TYP. .145 [3.7] DIA. .630 2.822 [71.6] 2.175 [55.2] [16.0] .145 [3.7] DIA. .062 [1.57] DIA. .062 [1.57] DIA. x .062 [1.6] L. x .062 [1.6] L. Mounting Detail Pad Layout 2.822 [71.6] 3.386 [86.0] MIN. SPECIFICATIONS .136 [3.45] .250 SPECIFICATIONS (2) PLS [6.4] .289 [7.3] MIN. Base: High Temp Nylon 46, UL 94V-0 Base: High Temp Nylon 46, UL 94V-0 MIN. .047 [1.19] Contacts: .012 (.30) Phosphor Bronze, .630 [16.0] (2) PLS .630 2.175 [55.2] Contacts: .012 (.30) Phosphor Bronze, [16.0] Tin-Nickel Plate Gold Plate (Flash) .094 [2.4] DIA. .094 [2.39] .136 [3.5] DIA. 2.175 [55.2] (2) PLS CAT. NO. 1043 CAT. NO. 1042 DUAL CELL .125 [3.2] DIA. .125 [3.2] DIA. (2) PLS (2) PLS .753 [19.1] .753 [19.1] D 3.034 [77.1] 3.034 [77.1] 1.566 [39.8] 3.386 [86.0] 2.710 [68.9] 1.566 [39.8] .130 [3.3] 2.710 [68.9] .709 [18.0] .130 [3.3] .709 [18.0] 2.175 [55.2] .145 [3.7] DIA. 1.378 [35.0] 2.175 [55.2] 2.822 [71.6] .145 [3.7] 1.378 [35.0] .062 [1.57] DIA. DIA. .062 [1.57] DIA. X .062 [1.57] L. X .062 [1.57] L. Pad Layout Mounting Detail .047 [1.2] DIA. (4) PLS 3.386 [86.0] MIN. .136 [3.45] (2) PLS .289 [7.3] MIN. .125 [3.18] DIA. SPECIFICATIONS (2) PLS SPECIFICATIONS 2.175 [55.2] .753 1.378 Base: High Temp Nylon 46, UL 94V-0 1.378 Base: High Temp Nylon 46, UL 94V-0 [19.1] [35.0] .753 [19.1] Contacts: .012 (.30) Phosphor Bronze, [35.0] Contacts: .012 (.30) Phosphor Bronze, .250 .125 [3.2] DIA. Tin-Nickel Plate [6.4] Gold Plate (Flash) 2.175 [55.2] (2) PLS. .094 [2.4] MIN. 2.822 [71.6] .136 [3.5] DIA. DIA. .094 [2.4] (2) PLS. CAT. NO. 1049 DIA. CAT. NO. 1048 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 17 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED THM LOW PROFILE LITHIUM & ALKALINE CELL HOLDERS “1/3N” • “AAA” • “1/2AA • “CR2” • “AA” • “2/3A” FEATURES APPLICATIONS • Snap—In PC contact holds firmly in position for wave soldering • Computer memory, power backup systems. • Tin Nickel Plated contacts for excellent solderability and durability • Telecommunications • Polarity clearly marked for orientation • Residential, industrial and commercial security systems •Snap—on retainer cover (optional) retains battery securely to withstand • PLC and industrial controls shock and vibration. Helps protect against shorting. Tamper—proof. THM LOW PROFILE Mounting Detail B MAX. .094 [2.39] F DIA. .047 [1.19] G 108C DIA. 1024C 1028C L W 1029LC RETAINER COVERS .125 [3.2] DIA. A (2) PLS. H 1029C REF. RETAINER COVER SPECIFICATIONS .062 [1.57] DIA. Base/Retainer Cover: PBT, UL 94V-0 .140 L X .062 [1.57] L. LEG Contacts: .012 (.30) Stainless Steel, Tin-Nickel Plate [3.56] .038 [0.97] Operating Temp Range: —60ºF to +290ºF (—50ºC to +145ºC) HOLDER COVER CAT. CAT. HB CELL NO. NO. L W (Ref. Dim) A (MAX) F G SIZE BATTERY CROSS REFERENCE Energizer 544, CR2, Duracell PX28L, CR2, Kodak K28A & KS28, “1/2 AA” 108 108C 1.160 (29.5) .640 (16.3) .633 (16.1) 1.030 (26.2) 1.360 (34.5) .610 (15.5) .279 (7.1) CR2, Panasonic CR14250, CR2, Saft LCP3, Maxell 4LR44, CR2, “CR2” Sanyo CR14250SE, CR2 1024C 1028 2.160 (54.9) .640 (16.3) .633 (16.1) 2.040 (51.8) 2.360 (59.9) 1.610 (40.9) .279 (7.1) “AA” Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran 1028C 1029C Duracell DL2/3A, Kodak K123L, Panasonic CR123A, “ 1029 1.500 (38.1) .720 (18.3) .712 (18.1) 1.375 (34.9) 1.700 (43.2) .950 (24.1) .320 (8.1) 2/3 A” 1029LC Saft 450SC & VR0450, Sanyo CR17335SE THM ULTRA LOW PROFILE Mounting Detail SINGLE .078 [1.98] DIA. B MAX. .047 [1.19] DIA. G 1022C L 1020C 1024C RETAINER W A COVERS H 1018C (REF) SPECIFICATIONS .050DIA. x .038 [0.97] .050 L.LEG Base: High Temp Nylon 46, — UL 94V—0 L .140 [3.6] Contacts: .012 (.30) Phosphor Bronze, Tin-Nickel Plate Operating Temp Range: -60ºF to +290ºF (-50ºC to +145ºC) DWG. 1 Finish: Tin-Nickel Plate DUAL Mounting Detail “1/3N” Mounting Detail L .053 [1.35] DIA B MAX. .078 [2.0] G DIA. HOLE .032 [.81] DIA B MAX BATTERY RELEASE (2) PLS. F G (2) PLS. F .047 [1.2] DIA. HOLE (4) PLS W .031 [.79] L A W A H (REF) H REF .178 [4.5] .050 [1.22] .140 [3.6] .025 [.64] x .060 [1.52] L. (2) PLS L L .038 [0.97] .050 [1.3] DIA. x Finish: Tin-Nickel Plate .050 [1.3]L. LEG Finish: Tin Plate DWG. 2 DWG. 3 HOLDER COVER CAT. CAT. DWG H B CELL NO. NO. NO. L W (Ref. Dim) A (MAX) F G SIZE BATTERY CROSS REFERENCE 1015 1024C 1 2.145 (54.5) .612 (15.5) .603 (15.3) 2.040 (51.8) 2.359 (59.9) — .265 (6.7) “AA” Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran 1013 1012C 2 2.145 (54.5) 1.180 (30.0) .603 (15.3) 2.040 (51.8) 2.359 (59.9) .568 (14.4) .265 (6.7) “AA” Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran 1021 1020C 1 1.933 (49.1) .500 (12.7) .445 (11.3) 1.810 (46.0) 2.140 (54.4) — .209 (5.3) “AAA” Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran 1023 1022C 2 1.933 (49.1) .875 (22.2) .445 (11.3) 1.810 (46.0) 2.140 (54.4) .430 (10.9) .182 (4.6) “AAA” Energizer, Duracell, Panasonic, Sanyo, Varta, Rayovac, Tadiran Duracell DL2/3A, Kodak K123L, Panasonic CR123A, Saft 450SC & VR0450, 1019 1018C 1 1.487 (37.8) .720 (18.3) .682 (17.3) 1.365 (42.9) 1.690 (42.9) — .319 (8.1) “2/3 A” Sanyo CR17335SE Energizer 544, Duracell PX28L, Kodak K28A & KS28, Saft LCP3, 1017 1024C 1 1.156 (29.4) .612 (15.5) .603 (15.3) 1.030 (26.2) 1.360 (34.5) — .265 (6.7) “1/2 AA” Maxell 4LR44, Sanyo CR14250SE 503 — 3 .450 (11.4) .540 (13.7) .506 (12.9) .430 (10.9) .570 (14.5) — .240 (6.1) “1/3 N” Duracell DL1/3N, Sanyo K58L, Energizer CR1/3N ® Tel (718) 956—8900 • Fax (718) 956—9040 www.keyelco.com 18 (800) 221—5510• kec@keyelco.com 31—07 20th Road – Astoria, NY 11105—2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED THM BATTERY HOLDERS SMT BATTERY HOLDERS SMT LOW PROFILE LITHIUM & ALKALINE CELL HOLDERS “1/3N” • “AAA” • “1/2AA” • “AA” • “ 2/3A” AVAILABLE ON TAPE AND REEL FEATURES • Low profile surface mount holders for Cylindrical • Ideal for both lead free solder and traditional APPLICATIONS Lithium and Alkaline batteries solder process • Computer memory, power backup systems • UL 94V-0 Heat resistant Nylon Housings well suited • Battery installation and removal does not require tools • Telecommunications for reflow soldering • Securely holds battery in place • Residential, industrial and commercial security systems • Designed for vacuum pick and place assembly • Polarity clearly marked for orentation • PLC and industrial controls • Gold-plated Phosphor Bronze contacts assure • Operating temp range: low contact resistance and are readily solderable -60ºF to +290ºF (-50ºC to +145ºC) SMT ULTRA LOW PROFILE 1024C Mounting Detail 1018C RETAINER L RETAINER .078 [2.0] COVER COVER B MAX. DIA. HOLE. .250 [6.3] .250 [6.4] MIN (2) PLS G .289 [7.3] MIN. W A L MIN. H REF. SPECIFICATIONS .050DIA. x Base: High Temp Nylon 46, UL 94V-0 .050 L.LEG Contacts: .012 (.30) Phosphor Bronze, Gold Plate (Flash) CAT. NO. ON TAPE H B CELL TAPE & REEL SPECS BULK & REEL COVER L W (REF) A (MAX) G SIZE PACKED ON 13” REEL BATTERY CROSS REFERENCE Energizer 544, Duracell PX28L, Kodak K28A & KS28, 56mm wide, 24mm pitch 1016 1016TR 1024C 1.723 (43.8) .612 (15.5) .603 (15.3) 1.030 (26.2) 1.360 (34.5) .265 (6.7) “1/2 AA” Panasonic CR14250, Saft LCP3, Maxell 4LR44, 125 pcs/reel Sanyo CR14250SE 88mm wide, 28mm pitch, Energizer, Duracell, Panasonic, Sanyo, 1024 1024TR 1024C 2.711 (68.9) .612 (15.5) .603 (15.3) 2.040 (51.8) 2.359 (59.9) .265 (6.7) “AA” 100 pcs/reel Varta, Rayovac, Tadiran , 72mm wide, 32mm pitch Duracell DL2/3A, Kodak K123L, Panasonic CR123A, 1018 1018TR 1018C 2.053 (52.2) .720 (18.3) .682 (17.3) 1.365 (34.7) 1.690 (42.9) .319 (8.1) “2/3 A” 100 pcs/reel Saft 450SC & VR0450, Sanyo CR17335SE SMT ULTRA LOW PROFILE SINGLE Mounting Detail L .078 [1.98] 1022C .200 [5.1] B MAX. DIA. HOLE MIN .200 [5.1] G (2) PLS. .250 [6.4] MIN L MIN W 1020C RETAINER A COVERS H REF. SPECIFICATIONS .050 [1.3] DIA. x Base: High Temp Nylon 46, UL 94V-0 .050 [1.3]L. LEG Contacts: .012 (.30) Phosphor Bronze, Gold Plate (Flash) DWG 1 Operating Temp: -60°F to +290°F (-50°C to +145°C) DUAL Mounting Detail “1/3N” Mounting Detail .118 [3.0] .078 [2.0] L .053 [1.3] DIA DIA. HOLE .200 [5.1] .125 [3.2] (2) PLS B MAX. .125 [3.2] G G F BATTERY RELEASE (2) PLS. B MAX. .156 [4.0] F .250 [6.4] MIN. L MIN. L A W W A H H REF. REF. .050 [1.3] DIA. x L .050 [1.3]L. LEG DWG 2 DWG 3 CAT. NO. ON TAPE DWG H B CELL TAPE AND REEL SPECS BULK & REEL COVER NO. L W (REF) A (MAX) F G SIZE PACKED ON 13” REEL BATTERY CROSS REFERENCE 2.421 .500 .445 1.810 2.140 .209 88mm Wide, 24mm pitch, Energizer, Duracell, Panasonic, 1020 1020TR 1020C 1 — “AAA” (61.5) (12.7) (11.3) (46.0) (54.4) (5.3) 200 pcs/reel Sanyo, Varta, Rayovac, Tadiran 2.421 .875 .445 1.810 2.140 .430 .182 88mm Wide, 32mm pitch, Energizer, Duracell, Panasonic, 1022 1022TR 1022C 2 “AAA” (61.5) (22.2) (11.3) (46.0) (54.4) (10.9) (4.6) 125 pcs/reel Sanyo, Varta, Rayovac, Tadiran 2.711 .612 .603 2.040 2.359 .265 88mm wide, 28mm pitch, Energizer, Duracell, Panasonic, 1024 1024TR 1024C 1 — “AA” (68.9) (15.5) (15.3) (51.8) (59.9) (6.7) 100 pcs/reel Sanyo, Varta, Rayovac, Tadiran 2.711 1.180 .603 2.040 2.359 .568 .265 88mm Wide, 48mm pitch, Energizer, Duracell, Panasonic, 1012 1012TR 1012C 2 “AA” (68.9) (30.0) (15.3) (51.8) (59.9) (14.4) (6.7) 100 pcs/reel Sanyo, Varta, Rayovac, Tadiran .748 .540 .506 .430 .570 .240 44mm Wide, 24mm pitch, Duracell DL1/3N, Sanyo K58L, 498 498TR — 3 — “1/3 N” (19.0) (13.7) (12.9) (10.9) (14.5) (6.1) 125 pcs/reel Energizer CR1/3N ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 19 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SMT & THM POLARIZED LITHIUM CELL HOLDERS “CR2” • “CR123A” FEATURES APPLICATIONS • Low profile surface mount and Thru Hole Mount Holders • Battery installation and removal does not require tools. • Computer memory, power backup systems for Lithium batteries • Securely holds battery in place • Telecommunications • UL 94V-0 Heat resistant Nylon Housings well suited for • Polarized holder offers circuit protection against • Residential, industrial security systems reflow or wave soldering. improper battery installation • PLC and industrial controls B MAX. B MAX. W .250 [6.35] 1018C RETAINER L A COVER A FITS ALL Surface Mount (SMT) Thru-Hole Mount (THM) H H HOLDERS (REF) (REF) .140 [3.6] .050 [1.27] DIA. x .038 [0.97] TYP. .050[1.27] L. LEG L .050 [1.27] DIA. x Mounting Detail .050[1.27] L. LEG Mounting Detail SPECIFICATIONS L L Base: High Temp Nylon 46, UL Rated 94V-0 B .078 [1.98] DIA. .078 [1.98] DIA. B Contacts: .012 (1.30) Phosphor Bronze, Gold Plate (Flash) - SMT .012 (1.30) Phosphor Bronze, Tin-Nickel Plate - THM .047 [1.19] DIA. HOLE .289 [7.3] MIN. TYP (2) PLS .250 [6.4] MIN. TYP Operating temp range: -60°F to 290°F (-50°C to 145°C) CAT. MOUNTING CELL NO. STYLE L W H (Ref) A B (MAX) G SIZE 1010 SMT 1.723 (43.8) .612 (15.5) .661 (16.8) 1.030 (26.2) 1.360 (34.5) .265 (6.7) CR2 1011 THM 1.156 (29.4) 1050 SMT 2.062 (52.4) .720 (18.3) .712 (18.1) 1.365 (34.7) 1.690 (42.9) .319 (8.1) CR123A 1051 THM 1.487 (37.8) RUGGED STEEL & ALUMINUM LITHIUM CELL HOLDERS • Sturdily constructed of quality materials • Contacts made from Brass, Nickel Plate • Ideal for punishing applications BATTERY CROSS REFERENCE STEEL HOLDERS “1/2AA” Energizer: 544, Duracell: PX28L, Kodak: K28A & KS28, .531 .144 [3.66] DIA. .128 [3.25] DIA. Panasonic: CR14250, Sanyo: CR14250SE, Saft: LCP3, [13.5] HOLE HOLE (2) PLS Maxell: 4LR44 .437 Mounting Detail .625 [15.9] [11.1] 1.224 [31.1] .531 .430 [10.9] [13.5] .437 .606 [11.1] .356 [15.4] .144 [3.7] DIA. HOLE .750 [9.0] .128 [3.3] DIA. HOLE (2) PLS [19.1] .082 [2.1] DIA HOLE (2) PLS. P/N 2103 1.156 [29.4] CAT. NO. 2103 CAT. NO.1103 REF. ALUMINUM HOLDERS “2/3A” BATTERY CROSS REFERENCE Duracell: DL2/3A, Kodak: K123L, Sanyo: CR173335SE, .437 Saft: 450SC & VR0450 .625 [15.9] [11.1] Mounting Detail 1.557 [39.5] 1.125 [28.6] .111 [2.8] HOLE TYP. 1.125 [28.6] .437 .625 [11.1] [15.9] .437 REF. .750 [11.1] .118 [3.0] DIA HOLE (4) PLS. [19.1] .082 [2.08] DIA HOLE (2) PLS. FOR P/N 131 ONLY 1.474 [37.4] REF. CAT. NO.131 CAT. NO.132 6 VOLT LITHIUM CELL HOLDERS 1.125 [28.58] 1.125 [28.6] .125 [3.18] DIA. .415 [10.54] .125 [3.2] DIA. (2) PLS .415 [10.5] (2) PLS 224 223 1.656 .750 POLARIZING 1.656 [42.06] [19.05] 1.000 .750 POLARIZING TAB [42.1] REF. [25.40] 1.000 [19.1] TAB REF. [25.4] SPRING SPRING .187 [4.75] TAB .205 [5.21] TAB .238 [6.1] • Polarizing Tab for proper orientation .648 [16.5] .836 [21.25] .600 • Lightweight, ideal for rugged applications REF. .600 [15.24] • [15.2] DL223A or Equivalent Batteries .750 [19.1] SPECIFICATIONS .648 [16.46] .239 [6.06] Frame: Aluminum 2024-T3 Terminals: Brass, Tin Plate .075 [1.9] Spring Contacts: .025 (.64) Dia. Spring Steel, Nickel Plate CAT. NO. 224 CAT. NO. 223 20 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED LITHIUM BATTERY HOLDERS INTERCONNECT BATTERY HOLDERS ALUMINUM HOLDERS CONNECTED IN SERIES ELIMINATES WIRING · LABOR SAVING Features pre-connected jumper strap insulated from the BATTERY CROSS REFERENCE Aluminum base. Batteries held in series circuit without HOLDS need of additional wiring. CAT. NO. OF IEC ANSI/NEDA NO. CELLS .531 (13.4) 1.906 (48.4) BATTERY
O.D. L “AA” CELL ( ) SIZE .565 (14.5) 1.988 (50.5) 146 2 Energizer, Duracell, Pana- 147 3 LR6 15A sonic, Sanyo, Varta, Ray- ovac, Tadiran 148 4 2 CELL .875 (22.2) 1.875 (47.6) BATTERY 3
O.D. L “C” CELL ( ) SIZE 1.125(28.6) 1.969 (50.0) C 2 149 E Energizer, Duracell, Pana- 3 CELL 3 150 LR14 14A sonic, Sanyo, Varta, Ray- ovac, Tadiran 151 4 1.187 (30.1) 2.312 (58.7) BATTERY
O.D. L “D” CELL ( ) SIZE 1.375 (34.9) 2.412 (61.3) 152 2 Energizer, Duracell, Pana- 153 3 LR20 13A sonic, Sanyo, Varta, Ray- ovac, Tadiran 4 CELL 158 4 ALUMINUM HOLDERS WITH PC LUGS ELIMINATES WIRING · LABOR SAVING For printed circuitry we have standardized our most popular holders with PC Lugs. Choice of single or MOUNTING HOLE DETAILS BATTERY CROSS REFERENCE multiple holders “AA” assembled with Cat. No. 4002 HOLDS lug. “C” and “D” assembled with Cat. No. 4003 lug. CAT. NO. OF ANSI/NEDA LW IEC NO. CELLS .531 (13.4) 1.906 (48.4) BATTERY
O.D. L “AA” CELL ( ) SIZE .565 (14.5) 1.988 (50.5) _ 2.250 (57.2) 2222 1 LR6 15A 2 2.250 (57.2) .625 (15.9) 2223 .875 (22.2) 1.875 (47.6) BATTERY
O.D. L “C” CELL ( ) SIZE 1.125 (28.6) 1.969 (50.0) _ 1 CELL 2224 1 2.218 (56.3) LR14 14A 2225 2 2.218 (56.3) 1.000 (25.4) 1.187 (30.1) 2.312 (58.7) BATTERY
O.D. L Mounting Detail “D” CELL ( ) SIZE 1.375 (34.9) 2.412 (61.3) 2 CELL L _ 2226 1 2.687 (68.3) LR20 13A 2227 2 2.687 (68.3) 1.312 (33.3) W .082 [2.1] DIA, TYP STEEL HOLDERS WITH PC LUGS ELIMINATES WIRING · LABOR SAVING For printed circuitry we have standardized our most popular holders with PC Lugs. Choice of single or mul- MOUNTING HOLE PATTERN BATTERY CROSS REFERENCE tiple holders “AA” assembled with Cat. No. 4002 lug. HOLDS “C” and “D” assembled with Cat. No. 4003 lug. CAT. NO. OF L W IEC ANSI/NEDA NO. CELLS .531 (13.4) 1.906 (48.4) BATTERY
O.D. L “AA” CELL ( ) SIZE .565 (14.5) 1.988 (50.5) _ 2228 1 2.203 (56.0) LR6 15A .750 (19.1) 2.203 (56.0) 2229 2 .875 (22.2) 1.875 (47.6) BATTERY
O.D. L “C” CELL ( ) SIZE 1.125 (28.6) 1.969 (50.0) _ 1 CELL ( ) 2230 1 2.343 59.5 LR14 14A Mounting Detail 2231 2 2.343 (59.5) 1.187 (30.2) L 1.187 (30.1) 2.312 (58.7) BATTERY
O.D. L ( ) “D” CELL SIZE 1.375 (34.9) 2.412 (61.3) 2 CELL _ 2.625 (66.7) W 2232 1 LR20 13A 2233 2 2.625 (66.7) 1.562 (39.7) .082 [2.1] DIA, TYP 21 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED RUGGED & LIGHTWEIGHT ALUMINUM BATTERY HOLDERS Lightweight yet strong, constructed of aircraft grade aluminum. Batteries snap-fit securely into clips. Contacts: Brass, Nickel Plate Lugs: Brass, Tin Plate Frame and Battery Clips: Aluminum Insulating Washers: Moisture Proof Resin impregated fiber MODIFICATIONS We welcome the opportunity to quote on variations of standard items. Use our engineering service for your custom- built holders. Holders with PC and Quick-Fit terminalsavailable on special order. FIG. 2 FIG. 1 BATTERY CROSS REFERENCE HOLDS CAT. NO. OF FIG. IEC ANSI/NEDA MANUFACTURERS NO. CELLS NO. 1 CELL 2 CELL .375 (9.5) 1.673 (42.5) BATTERY
O.D. L “AAA” CELL ( ) SIZE .468 (11.9) 1.752 (44.5) 137 11 Energizer, Duracell, 138 23 LR03 24A Panasonic, Sanyo, Varta, 169 33 Rayovac, Tadiran 170 43 .531 (13.4) 1.906 (48.4) BATTERY
O.D. L ( ) “AA” CELL SIZE .565 (14.5) 1.988 (50.5) FIG. 3 FIG. 4 139 11 140 23 Energizer, Duracell, 171 33 LR6 Panasonic, Sanyo, Varta, 182 43 15A Rayovac, Tadiran 189 22 192 44 193 64 .875 (22.2) 1.875 (47.6) BATTERY O.D.
L 2 CELL 4 CELL “C” CELL ( ) SIZE1.125(28.6) 1.969(50.0) 173 11 174 23* Energizer, Duracell, 185 22 14A Panasonic, Sanyo, Varta, LR14 187 33 Rayovac, Tadiran 196 4 4** 197 64 1.187 (30.1) 2.312 (58.7) BATTERY
“D” CELL O.D. L ( ) SIZE 1.375 (34.9) 2.412 (61.3) 175 11 176 23* Energizer, Duracell, 186 22 LR20 13A Panasonic, Sanyo, Varta, 190 33 Rayovac, Tadiran 200 4 4** 3 CELL 201 64 6 CELL 205 6 4*** CAT. NO. 193 .375 (9.5) 1.110 (28.2) BATTERY
O.D. L CAT. NO. 197 “N” OR “12V” CELL ) ( SIZE .468 (11.9) 1.189 (30.2) 154 11 Energizer, Duracell, LR1 910A Panasonic, Sanyo, Varta, 155 23 Rayovac, Tadiran 156 33 LITHIUM “2/3A” OR “CR123” CELL 132 1 1 CR17345 5018LC All major manufactures “9 VOLT” BATTERY 203P 1604A, Energizer, Duracell, 1290 REF. PAGE 31 6LR61 1604LC, 11604 Panasonic, Sanyo, Varta, 1290-79 7.2H5 Rayovac, Tadiran 1290-66 4 CELL 6 CELL * 1 Single clip holds 2 batteries in place. ** 2 Clips hold 4 batteries in place. ** 3 Clips hold 6 batteries in place. CAT. NO. 205 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 22 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED ALUMINUM BATTERY HOLDERS ALUMINUM BATTERY HOLDERS DIMENSIONAL DRAWINGS FOR ALUMINUM BATTERY HOLDERS MATERIAL SPECIFICATIONS Insulating Washers: Moisture proof, resin impregnated fibre Frame and Clips: Aluminum 2024-T3 Terminal Lugs: Brass, Tin Plate Contact Eyelet: Brass, Nickel Plate L L H H (MOUNTING HOLES) (MOUNTING HOLES) M M J W J W A C A C DWG. 1 DWG. 2 L L H H (MOUNTING HOLES) (MOUNTING HOLES) M M J K W J K W A C A C DWG. 3 DWG. 4 WL H C K J A M CAT. DWG. Width Length Height Height to Battery Distance Between Mounting Holes Mounting Holes Mounting Holes NO. NO. Of Base Of Base Of Base Center Height Battery Contacts Width Length (Diameter) “AAA” CELL _ 137 1 .437 (11.1) 1.915 (48.6) .467 (11.9) .281 (7.1) .250 (6.4) 1.500 (38.1) .111 (2.8) _ 138 3 .812 (20.6) 1.915 (48.6) .467 (11.9) .281 (7.1) .437(11.1) .875 (22.2) .144 (3.7) 169 3 1.250 (31.8) 1.915 (48.6) .467 (11.9) .281 (7.1) .437(11.1) .438 (11.1) .875 (22.2) .144 (3.7) 3 1.687 (42.8) 1.915 (48.6) .467 (11.9) .281 (7.1) .437(11.1) .875 (22.2) .875 (22.2) .144 (3.7) 170 “AA” CELL _ 1 .625 (15.9) 2.140 (54.4) .578 (14.7) .392 (10.0) .406 (10.3) 1.500 (38.1) .111 (2.8) 139 _ 3 1.125 (28.6) 2.156 (54.8) .562 (14.3) .375 (9.5) .625 (15.9) 1.218 (30.9) .144 (3.7) 140 3 1.750 (44.5) 2.140 (54.4) .578 (14.7) .392 (10.0) .625 (15.9) .625 (15.9) 1.218 (30.9) .144 (3.7) 171 3 2.656 (67.5) 2.140 (54.4) .615 (15.6) .421 (10.7) .718 (18.2) 1.437 (36.5) 1.218 (30.9) .144 (3.7) 182 _ 189 2 .625 (15.9) 4.110 (104.4) .593 (15.1) .406 (10.3) .437 (11.1) 3.000 (76.2) .128 (3.3) _ 192 4 1.125 (28.6) 4.093 (104.0) .593 (15.1) .406 (10.3) .625 (15.9) 3.093 (78.6) .144 (3.7) 193 4 1.750 (44.5) 4.093 (104.0) .593 (15.1) .406 (10.3) .625 (15.9) .625 (15.9) 3.125 (79.4) .144 (3.7) “C” CELL _ .437 (11.1) 1 .750 (19.1) 2.093 (53.2) .968 (24.6) .613 (15.6) 1.500 (38.1) .144 (3.7) 173 _ 3* 1.625 (41.3) 2.093 (53.2) 1.120 (28.4) .613 (15.6) 1.000 (25.4) 1.250 (31.75) .144 (3.7) 174 _ 2 .750 (19.1) 4.046 (102.8) .968 (24.6) .593 (15.1) .500 (12.7) 3.187 (80.9) .144 (3.7) 185 3 2.840 (72.1) 2.125 (54.0) .968 (24.6) .593 (15.1) 1.125 (28.6) 1.125 (28.6) 1.250 (31.8) .144 (3.7) 187 _ 4** 1.625 (41.3) 4.075 (103.5) 1.120 (28.4) .593 (15.1) 1.000 (25.4) 3.187 (80.9) .144 (3.7) 196 4 2.875 (73.0) 4.075 (103.5) .968 (24.6) .593 (15.1) 1.150 (29.2) 1.000 (25.4) 3.187 (80.9) .144 (3.7) 197 “D” CELL _ 175 1 1.000 (25.4) 2.562 (65.1) 1.262 (32.1) .763 (19.4) .750 (19.1) 1.750 (44.5) .128 (3.3) _ 176 3* 2.062 (52.4) 2.562 (65.1) 1.468 (37.3) .741 (18.8) 1.312 (33.3) 1.500 (38.1) .144 (3.7) _ .687 (17.4) 186 2 1.000 (25.4) 4.921 (125.0) 1.262 (32.1) .747 (19.0) 4.125 (104.8) .128 (3.3) 3 3.375 (85.7) 2.562 (65.1) 1.262 (32.1) .775 (19.7) 1.350 (34.3) 1.125 (28.6) 1.937 (49.2) .144 (3.7) 190 _ 4** 2.062 (52.4) 4.870 (123.7) 1.468 (37.3) .741 (18.8) 1.312 (33.3) 4.375 (111.1) .144 (3.7) 200 4 3.375 (85.7) 4.920 (125.0) 1.262 (32.1) .775 (19.7) 1.343 (34.1) 1.125 (28.6) 4.250 (108.0) .144 (3.7) 201 _ 4*** 2.062 (52.4) 7.270 (184.7) 1.468 (37.3) .741 (18.8) 1.312 (33.3) 6.750 (171.5) .144 (3.7) 205 “N” OR “12V” CELL _ 1 .437 (11.1) 1.328 (33.7) .483 (12.3) .297 (7.5) .250 (6.4) .906 (23.0) .111 (2.8) 154 _ 155 3 .937 (23.8) 1.347 (34.2) .483 (12.3) .297 (7.5) .500 (12.7) .875 (22.2) .128 (3.3) 156 3 1.500 (38.1) 1.347 (34.2) .483 (12.3) .297 (7.5) .531 (13.5) .562 (14.3) .875 (22.2) .111 (2.8) “2/3A” CELL _ 132 1 .625 (15.9) 1.474 (37.4) .625 (15.9) .437 (11.1) .437 (11.1) 1.125 (28.6) .111 (2.8) “9 VOLT” BATTERY __ _ _ _ 1 1.125 (28.6) 2.000 (50.8) .797 (20.2) 203-P __ _ _ _ 1 1.125 (28.6) 1.900 (48.3) .718 (18.2) 1290 __ _ _ _ 1* 1.125 (28.6) 1.900 (48.3) .857 (21.8) 1290-66 __ _ _ _ 1 1.125 (28.6) 1.900 (48.3) .812 (20.6) 1290-79 * 1 Single clip holds both batteries in place. ** 2 Clips hold four batteries in place. *** 3 Clips hold six batteries inplace. DIMENSIONS ARE FOR REFERENCE ONLY Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 23 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED RUGGED STEEL BATTERY HOLDERS An established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Retainer clips are available to lock batteries in place and prevent shifting or loosening. Refer to page 10. Recommended for use where shock or severe vibration is encountered. Special fabrication for more than four batteries or variations from standard stock parts can be assembled to meet your requirements. • Ideal for NiCd, Alkaline, NiMH, Carbon, Zinc and Lithium Cells • Corrosion Resistant, Nickel Plate • Brass Contacts, Nickel Plate • Moisture Proof Resin Impregnated, Fibre Insulating Washers FIG. 1 STAINLESS STEEL BASE. INSULATOR TUBES SUPPLIED FIG. 2 STEEL BASE. LITHIUM (SINGLE CELL) FOR 2-3-4 CELLS (END TO END) 1 CELL 2 CELL 3 CELL 4 CELL FIG. 3 PHENOLIC BASE FOR 2, 3, 4 CELLS (SIDE BY SIDE) 3 CELL 4 CELL 2 CELL 1100 2100 1100 SERIES BATTERY CROSS REFERENCE SERIES SERIES ONE CONTACT ALL CONTACTS HOLDS BATTERY INSULATED INSULATED NO. OF FIG. CAT. NO. CAT. NO. MANUFACTURERS CELLS NO. IEC ANSI/NEDA (GROUNDED .531 (13.4) 1.906 (48.4) BATTERY
O.D. L “AA” CELL ( ) ONE SIDE) SIZE .565 (14.5) 1.988 (50.5) 1139 2139 11 — 2140* 23 Energizer, Duracell, — 2171* 33 Panasonic, Sanyo, Varta, — 2182* 43 LR6 15A 1189 2189 21 Rayovac, Tadiran NON-INSULATED INSULATED DIMPLE CONTACT CONTACT 1191 2191 31 1194 2194 41 .875 (22.2) 1.875 (47.6) BATTERY O.D.
L “C” CELL ( ) SIZE1.125(28.6) 1.969(50.0) 2100 SERIES 1173 2173 11 — 2174* 23 Energizer, Duracell, — 2187* 33 LR14 14A Panasonic, Sanyo, Varta, — 2188* 43 Rayovac, Tadiran 1185 2185 21 (FULLY INSULATED) 1195 2195 31 1198 2198 41 1.187 (30.1) 2.312 (58.7) BATTERY
“D” CELL O.D. L ( ) SIZE 1.375 (34.9) 2.412 (61.3) 1175 2175 11 — 2176* 23 INSULATED INSULATED Energizer, Duracell, — 2190* 33 CONTACT CONTACT — 2192* 43 Panasonic, Sanyo, Varta, LR20 13A 1186 2186 21 Rayovac, Tadiran 1199 2199 31 MODIFICATIONS 1162 2162 41 We welcome the opportunity to quote on variations of .475 (12.1) .965 (24.5) BATTERY
standard items. Use our engineering service for your custom-built O.D. L “1/2AA” LITHIUM CELL ( ) SIZE .510 (13.0) .992 (25.2) holders. Holders with PC and Quick-Fit terminalsavailable on Energizer 544, Duracell PX28L, special order. — 12 1103 CR11108 1406LC Panasonic CR14250 *Clips mounted on .062 (1.57) thick Phenolic board. ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 24 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED STEEL BATTERY HOLDERS STEEL BATTERY HOLDERS DIMENSIONAL DRAWINGS FOR STEEL BATTERY HOLDERS MATERIAL SPECIFICATIONS: Clips: Spring Steel, Nickel Plate Phenolic Base: Type PBE, Per MIL-P-3115C Contact Eyelets: Brass, Nickel Plate Stainless Steel Base: Ribbed, For Added Support Insulating Washers: Resin Impregnated Fibre Steel Base: Spring Steel, Nickel Plate Solder Lugs: Brass, Tin Plate DIMPLE INSULATED CONTACT CONTACT INSULATED CONTACTS L L .144 [3.7] DIA. (2) PLS .144 [3.7] DIA. (2) PLS H H W W A C A C DWG. 1 1100 SERIES STAINLESS STEEL BASE (END-TO-END) DWG. 1 2100 SERIES STAINLESS STEEL BASE (END-TO-END) INSULATED CONTACTS L .144 [3.7] DIA. (2) PLS H INSULATED CONTACTS L H .144 [3.7] DIA. .437 J W W [11.1] A C .128 [3.3] DIA. (2) PLS A C PHENOLIC BASE DWG. 2 “1/2AA” LITHIUM STEEL BASE (SINGLE CELL) DWG. 3 2100 SERIES PHENOLIC BASE (SIDE-BY-SIDE) 1100 2100 WL H C J A SERIES SERIES HOLDS ONE CONTACT ALL CONTACTS NO. OF DWG. Width Length Height Height to Mounting Hole Mounting Holes INSULATED INSULATED CELLS NO. Of Base Of Base Of Holder Battery Center Distance CTR To CTR CAT. NO. CAT. NO. “AA” CELL _ 1139 2139 1 1 .687 (17.4) 2.125 (54.0) .656 (16.7) .437 (11.1) 1.343 (34.1) _ 2140* 2 3 1.250 (31.8) 2.125 (54.0) .656 (16.7) .437 (11.1) .750 (19.1) 1.343 (34.1) _ 2171* 3 3 2.000 (50.8) 2.125 (54.0) .656 (16.7) .437 (11.1) .750 (19.1) 1.343 (34.1) _ 2182* 4 3 2.750 (69.9) 2.125 (54.0) .656 (16.7) .437 (11.1) .750 (19.1) 1.343 (34.1) _ 1189 2189 2 1 .687 (17.4) 4.093 (104.0) .656 (16.7) .437 (11.1) 3.312 (84.1) _ 1191 2191 3 1 .687 (17.4) 6.030 (153.2) .656 (16.7) .437 (11.1) 5.250 (133.4) _ 1194 2194 4 1 .687 (17.4) 8.010 (203.5) .656 (16.7) .437 (11.1) 7.230 (183.6) “C” CELL _ 1173 2173 1 1 .687 (17.4) 2.125 (54.0) 1.000 (25.4) .625 (15.9) 1.343 (34.1) _ 2174* 2 3 1.750 (44.5) 2.062 (52.4) 1.000 (25.4) .625 (15.9) 1.187 (30.1) 1.343 (34.1) _ 2187* 3 3 2.937 (74.6) 2.062 (52.4) 1.000 (25.4) .625 (15.9) 1.187 (30.1) 1.343 (34.1) _ 2188* 4 3 4.125 (104.8) 2.062 (52.4) 1.000 (25.4) .625 (15.9) 1.187 (30.1) 1.343 (34.1) _ 1185 2185 2 1 .687 (17.4) 4.093 (104.0) 1.000 (25.4) .625 (15.9) 3.312 (84.1) _ 1195 2195 3 1 .687 (17.4) 5.937 (150.8) 1.000 (25.4) .625 (15.9) 5.156 (131.0) _ 1198 2198 4 1 .687 (17.4) 7.906 (200.8) 1.000 (25.4) .625 (15.9) 7.125 (181.0) “D” CELL _ 1175 2175 1 1 .687 (17.4) 2.562 (65.1) 1.281 (32.5) .796 (20.2) 1.625 (41.3) _ 2176* 2 3 2.125 (54.0) 2.562 (65.1) 1.281 (32.5) .796 (20.2) 1.562 (39.7) 1.625 (41.3) _ 2190* 3 3 3.687 (93.6) 2.562 (65.1) 1.281 (32.5) .796 (20.2) 1.562 (39.7) 1.625 (41.3) _ 2192* 4 3 5.250 (133.4) 2.562 (65.1) 1.281 (32.5) .796 (20.2) 1.562 (39.7) 1.625 (41.3) _ 1186 2186 2 1 .687 (17.4) 4.937 (125.4) 1.281 (32.5) .796 (20.2) 4.000 (101.6) _ 1199 2199 3 1 .687 (17.4) 7.281 (184.9) 1.281 (32.5) .796 (20.2) 6.343 (161.1) _ 1162 2162 4 1 .687 (17.4) 9.625 (244.5) 1.281 (32.5) .796 (20.2) 8.687 (220.6) “1/2AA” LITHIUM CELL _ 1103 1 2 .625 (15.9) 1.156 (29.4) .595 (15.1) .345 (8.8) .531 (13.5) *Clips mounted on .062 (1.57) Thick, Phenolic board. DIMENSIONS ARE FOR REFERENCE ONLY Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 25 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED ECONOMICAL PLASTIC BATTERY HOLDERS • Economical design, available with PC terminals or wire leads • Batteries securely held in place to assure a positive connection and maintain a low contact resistance • Contact springs self-adjust to variations in battery length • Withstands shock and vibration • Available with solder lugs or male/female snap fasteners • For easy removal, available with ribbon • Holders for multiple batteries are prewired in series. SPECIFICATIONS Holder: Polypropylene Springs: Spring Steel, Nickel Plate PC Pins: .031 (.79) Brass, Nickel Plate Wires (Red & Black): #26 AWG, Tinned, .187 (4.8) end strip UL/CSA1007 MODIFICATIONS We welcome the opportunity to quote on variations of standard items. Use our Engineering services for your custom-built holders. Holders for “C” and “D” cell are available on request. “AA” One (1) Cell Two (2) Cells - In Series Three (3) Cells - In Series Four (4) Cells - In Series .547 2.283 [58.0] .630 [16.0] .650 [16.0] 2.244 [57.0] .500 [13.9] 2.343 [59.5] 2.283 [58.0] .669 [17.0] [12.7] .665 [16.9] - .500 [12.7] .500 1.296 .590 .098 [2.5] DIA. [12.7] [15.0] [32.9] 1.901 (2) PLS 2.480 - + [48.3] [63.0] .500 [12.7] - .120 [3.1] DIA. TERMINALS .500 + (2) PLS THIS SIDE ONLY [12.7] .500 - + + [12.7] TERMINALS .130 [3.3] DIA. THIS SIDE ONLY (2) PLS 2.047 [52.0] .115 [2.9] DIA. TERMINALS (2) PLS THIS SIDE ONLY CAT. NO. 2460 PC Mount CAT. NO. 2462 PC Mount CAT. NO. 2464 PC Mount CAT. NO. 2477 PC Mount CAT. NO. 2460RB PC Mount w/ribbon CAT. NO. 2462RB PC Mount w/ribbon CAT. NO. 2464RB PC Mount w/ribbon CAT. NO. 2477RB PC Mount w/ribbon CAT. NO. 2461 Wire Leads - 6.0 (150) CAT. NO. 2463 Wire Leads - 6.0 (150) CAT. NO. 2465 Wire Leads - 6.0 (150) CAT. NO. 2478 Wire Leads - 6.0 (150) “AAA” Four (4) Cells - In Series One (1) Cell Two (2) Cells - In Series Three (3) “AAA” Cells - In Series .500 2.100 [53.0] .512 [13.0] 1.968 [50.0] [12.7] .512 [13.0] .500 .512 2.050 [52.7] .512 [13.0] 2.086 [53.0] [12.7] [13.0] .500 .500 [12.7] - [12.7] .968 .500 1.980 1.476 - [50.3] [24.6] [12.7] - [37.5] .500 + .500 [12.7] [12.7] TERMINALS .590 .115 [2.9] DIA. + + - + [15.0] (3) PLS THIS SIDE ONLY TERMINALS .125 [3.2] DIA. TERMINALS .093 [2.36] DIA. THIS SIDE ONLY THIS SIDE ONLY 1.760 [44.7] (2) PLS (2) PLS CAT. NO. 2466 PC Mount CAT. NO. 2468 PC Mount CAT. NO. 2479 PC Mount CAT. NO. 2481 PC Mount CAT. NO. 2466RB PC Mount w/ribbon CAT. NO. 2468RB PC Mount w/ribbon CAT. NO. 2479RB PC Mount w/ribbon CAT. NO. 2481RB PC Mount w/ribbon CAT. NO. 2467 Wire Leads - 6.0 (150) CAT. NO. 2469 Wire Leads - 6.0 (150) CAT. NO. 2480 Wire Leads - 6.0 (150) CAT. NO. 2482 Wire Leads - 6.0 (150) “1/2AA” • “CR2” • “N” • “12V” “1/2 AA” Cell -or “CR2” Cell “N” Cell - 1.5V or “12V” Cell Two (2) “N” or Two (2) “12V” Cells - In Series .602 1.358 [34.5] [15.3] .500 1.400 [35.0] .550 [14.0] .689 [12.7] .590 1.500 [38.1] [17.5] .512 [15.0] [13.0] - 1.062 .531 [27.0] [13.5] .472 [12.0] + .590 TERMINALS .093 [2.36] DIA. - + [15.0] - + (4) PLS THIS SIDE ONLY 1.162 [29.5] 1.200 [30.0] CAT. NO. 2485 PC Mount CAT. NO. 2470 PC Mount CAT. NO. 2472 PC Mount CAT. NO. 2485RB PC Mount w/ribbon CAT. NO. 2470RB PC Mount w/ribbon CAT. NO. 2472RB PC Mount w/ribbon CAT. NO. 2486 Wire Leads - 6.0 (150) CAT. NO. 2471 Wire Leads - 6.0 (150) CAT. NO. 2473 Wire Leads - 6.0 (150) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 26 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PLASTIC BATTERY HOLDERS PLASTIC BATTERY HOLDERS DENSI-PAK® BATTERY HOLDERS • Supports high density packaging on or off board, positions anywhere for easy access to batteries • Economical design • Batteries securely held in place to assure a positive connection and maintain a low contact resistance • Contact springs self-adjust to variations in battery length • Snap-on cover protects and secures batteries • Withstands shock and vibration SPECIFICATIONS Holder: ABS Springs: Spring Steel, Nickel Plate Wires (Red & Black): 6.0 (150) long, #26 AWG, Tinned, .187 (4.8) end strip UL/CSA1007 “AA” Two (2) Cells - 3V Three (3) Cells - 4.5V HOLDER HOLDER .728 [18.5] 2.697 [68.5] COVER .709 [18.0] 2.687 [68.3] COVER 1.890 [48.0] 1.394 [35.4] FOR SELF-TAPPING SCREW FOR SELF-TAPPING SCREW CAT. NO. 2490 CAT. NO. 2487 “AAA” Two (2) Cells - 3V Three (3) Cells - 4.5V HOLDER HOLDER COVER 2.126 [54.0] .591 [15.0] COVER .630 [16.0] 2.480 [63.0] 1.476 [37.5] 1.024 [26.0] CAT. NO. 2489 CAT. NO. 2484 PLASTIC BATTERY HOLDERS WITH SNAP-ON CONNECTORS • Features separable “snap-on/snap-off” battery connector (9 Volt type) to assure • Batteries securely held in place to maintain a positive contact and a low reliable connections contact resistance • Battery contact springs self adjust to variations in battery length • Economical design, holders available for two, three or four cells. Wired in series • Withstands shock and vibration to accept connector (9 Volt type) • Ideally mates with Keystone 9 Volt battery straps and connectors • Easily disconnect battery holder from your device - no tools required (Refer to pages 28 - 29) “AA” SPECIFICATIONS Holder: Polypropylene Male/Female Contacts: Brass, Nickel Plate Springs: Spring Steel, Nickel Plate Two Cells - 3V Three (3) Cells - 4.5V Four (4) Cells - 6V .669 [17.0] 2.283 [58.0] 2.283 [58.0] .630 [16.0] 2.283 [58.0] 1.100 [28.0] 1.901 [48.3] .500 .500 .500 1.250 [31.8] 1.200 [30.5] [12.7] [12.7] [12.7] .130 [3.3] DIA. .130 [3.3] DIA. (3) PLS (2) PLS CAT. NO. 2474 CAT. NO. 2475 CAT. NO. 2476 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 27 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SHIELDED 9 VOLT BATTERY STRAPS • Insulates and shields 9 Volt battery snap-on connector contacts • Protects battery contacts from dust, dirt, and physical damage • Assures safe secure use, reduces the potential of short circuits and • Ideal for rugged applications, made of high impact molded plastic prevents tampering with battery contacts with integral wire lead strain relief • Protects circuits, prevents unwanted electrical discharge due to unintended grounding Modifications available with different wire lengths. 84-4 SPECIFICATIONS 84-6 Base: ABS 84-8 Male/Female Contacts: Brass, Nickel Plate Wires (Red & Black): #26 AWG, Tinned, .187 (4.8) end strip, UL/CSA1007 *Tolerance on lead length +/-.250 (6.4) .984 [25.0] .312 [7.9] .335 [8.5] 81-4 .500 [12.7] 81-6 .500 [12.7] 81-8 RED RED .512 .960 .500 [13.0] [24.4] [12.7] BLK BLK STRAIN RELIEF I STYLE T STYLE MOLDED MOLDED CAT. *LEAD CAT. NO. LENGTH NO. 84-4 4.00 (101.6) 81-4 84-6 6.00 (152.4) 81-6 84-8 8.00 (203.2) 81-8 PREMIUM 9 VOLT BATTERY STRAPS • Fully Assembled • Rigid Assembly • Ideal for rugged applications, made of high impact molded plastic with integral wire lead strain relief Rigidly constructed. Nickel plate, male and female contacts. Female contacts are spring temper. Accepts numerous in- sertions to meet U.L. approved standards. Provides excellent mechanical strength and low contact resistance. Wires have tinned copper conductors, PVC insulation and the ends are stripped for easy connection. Wires are rated to +176°F (+80°C) and 300V and meet UL/CSA #1061/#1007 requirements. Modifications available with different wire lengths. SPECIFICATIONS Contacts: Phosphor Bronze, Nickel Plate Wire: #26 AWG, 7/34 End Strip: .250 (6.4) Long, Tinned 2238 Base: Polypropylene 2241 2239 *Tolerance on lead length +/-.250 (6.4) 2242 2240 2243 I STYLE T STYLE Base Size: MOLDED MOLDED 1.00 (25.4)
.512 (13.0) Base Size: CAT. *LEAD CAT. 1.062 (27.0)
.512 (13.0) NO. LENGTH NO. 2238 4.00 (101.6) 2241 2239 6.00 (152.4) 2242 2240 8.00 (203.2) 2243 ECONOMY 9 VOLT BATTERY STRAPS • Fully Assembled • Rigid Assembly When product cost is of the utmost importance these economy battery straps will suit your needs. Brass con- tacts, nickel plated with vinyl or ABS covering. Wires have tinned copper conductors, PVC insulation and the ends are stripped for easy connection. Wires meet UL/CSA #1007 requirements. 235-M Modifications available with different wire lengths 236-M SPECIFICATIONS 237-M Contacts: Brass, Nickel Plate 232-M Molded ABS Base Size: Wire: #26 AWG, 7/34 Molded ABS Base Size: .965 (25.0)
.469 (11.9) 233-M End Strip: .250 (6.4) Long, Tinned .984 (25.0)
.469 (11.9) (Strain Relief) 234-M (Strain Relief) *Tolerance on lead length +/-.250 (6.4) I STYLE T STYLE 235 MOLDED VINYL MOLDED VINYL 236 CAT. CAT. *LEAD CAT. CAT. NO. NO. LENGTH NO. NO. 232 237 233 232-M 232 4.00 (101.6) 235-M 235 Vinyl Base Size: Vinyl Base Size: 233-M 233 6.00 (152.4) 236-M 236 234 1.125 (31.8)
.530 (13.5) 1.000 (24.5)
.528 (13.4) 234-M 234 8.00 (203.2) 237-M 237 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 28 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED 9 VOLT STRAPS 9 VOLT BATTERY STRAPS & CONTACTS PREMIUM 9 VOLT BATTERY STRAPS FIBRE BASE FIBRE BASE • Fully Insulated • Flexible assembly I - STYLE T - STYLE Base Size: CAT. *LEAD NO. LENGTH 1.025 (26.0)
.535 (13.6) Cover Size: Cover Size: CAT. *LEAD CAT. *LEAD .062 (1.57) thick .900 (22.9)
.575 (14.6) .900 (22.9)
.575 (14.6) NO. LENGTH NO. LENGTH 68 NONE Contacts: Steel, Nickel Plate Contacts: Steel., Nickel Plate Contacts: Steel., Nickel Plate 83-4 4.00 (101.6) 85-4 4.00 (101.6) 72-4 4.00 (101.6) Wire: #22 AWG, 7/30 Prebond Wire: #22 AWG, 7/30 Prebond Wire: #22 AWG, 7/30 Prebond 83 6.50 (165.1) 85-6 6.50 (165.1) 72 7.00 (177.8) End Strip: .375 (9.5) Long, Tinned End Strip: .375 (9.5) Long, Tinned End Strip: .375 (9.5) Long, Tinned 83-8 8.00 (203.2) 85-8 8.00 (203.2) 72-8 8.00 (203.2) *Tolerance on lead length +/-.250 (6.4) *Tolerance on lead length +/-.250 (6.4) *Tolerance on lead length +/-.250 (6.4) VERTICAL 9 VOLT PC SNAP-ON CONTACT 9 VOLT SNAP-ON CONTACT • Space saving, economical • Excellent mechanical strength • Low contact resistance • Cost saving design • Ideal for custom applications • Durable fibre base • Wave solderable • Anti-Wicking Design • Attach your own terminals and wire leads .535 [13.6] .535 [13.6] SPECIFICATIONS 1.025 [26.0] 1.025 [26.0] Base: .062 (1.57) thick Fibre .500 [12.7] .500 [12.7] Contacts: Steel, Nickel Plate Mounting Detail Pins: Brass, Tin Plate .500 L L [12.7] CAT. NO. LENGTH SPECIFICATIONS Base: .062 (1.57) thick Fibre 967 (with PC Pins) .120 (3.0) .086 [2.20] DIA. .080 [2.05] (2) PLS Contacts: Steel, Nickel Plate 968 (with PC Pins) .400 (10.2) CAT. NO. 68 (without PC Pins) DUAL 9 VOLT BATTERY STRAP This dual battery strap is pre-wired for connecting two 9 Volt batteries. Base made from fibre material with steel, nickel plated contacts. Wires have tinned copper con- ductors, PVC insulation and the ends are stripped for easy connection. Wires meet UL/CSA #1061 requirements. PARALLEL .212 [5.4] .900 [22.9] .079 [2.00] DIA. SPECIFICATIONS .500 [12.7] .062 [1.55] (2) PLS Contacts: Steel, Nickel Plate Wire: #22 AWG, 7/30 Prebond End Strip: .375 (9.5) Long, Tinned .700 1.100 [28.0] [17.8] CAT. *LEAD BLACK RED NO. LENGTH 227 7.00 (177.8) *Tolerance on lead length +/-.250 (6.4) PROTECTIVE BATTERY CAP Protects 9 Volt batteries and battery packs when they are not in use • Snap-fits onto battery contacts • Both male and female contacts are covered, minimizing physical damage • .960 [24.4] which can occur during battery handling, shipping and storage Shields the battery contacts and reduces the potential of a short circuit • between battery poles Protects sensitive electronic equipment, systems and circuits, cap prevents • .120 [3.1] unwanted electrical discharges .500 [12.7] Protects the battery contacts from damage due to dust, dirt and contamination • MATERIAL: .375 [9.5] Impact Resistant Polypropylene, Black CAT. NO. 96 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 29 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED HORIZONTAL 9 VOLT PC LEAF-SPRING CONTACT • Ideal “Slide-In” contact for easy installation and removal • Reliable leaf-spring assures low contact resistance of 9 Volt batteries • Ideal for self-contained battery compartments • Space saving design installs directly onto the PC board • Snap-in mounting legs holds contact secure during • Suitable for .062 (1.57) to .093 (2.36) thick PC boards wave soldering MATERIAL: .012 (.30) Spring Steel, Tin-Nickel Plate .360 [9.1] .160 [4.1] .200 [5.1] REF. .325 [8.2] REF. .450 [11.4] Mounting Detail for Two Contacts .500 [12.7] .120 [3.0] .120 [3.0] .150 [3.8] .047 [1.20] .045 [1.15] .125 [3.2] .365 [9.3] .416 [10.6] .250 [6.3] .052 [1.30] REF. DIA. TYP. CAT. NO. 590 HORIZONTAL 9 VOLT PC SNAP-ON CONTACTS Mounts Directly to Printed Circuit Board • Space saving design installs directly onto the PC board • Suitable for .062 (1.57) to .093 (2.36) thick PC boards • Ideal for self-contained battery compartments To Mount Battery “Off” PC Board To Mount Battery “On” PC Board Use Cat. No. 635 and Cat. No. 636 Use Cat. No. 593 and Cat. No. 594 MATERIAL: Frame: .015 (.38) Steel, Tin Plate; Contacts: Steel, Nickel Plate “Off-Board” “Off-Board” .156 .156 .265 .265 .380 [9.7] .380 [9.7] .410 [10.4] .410 [10.4] [4.0] [4.0] [6.7] [6.7] .380 [9.7] .550 .550 .380 [9.7] .190 [4.8] .190 [4.8] [14.0] [14.0] .350 [8.9] .350 [8.9] .180 [4.6] .180 [4.6] .120 [3.0] .120 [3.0] .100 [2.5] .100 [2.5] .062 [1.55] .062 [1.55] (3) PLS (3) PLS (3) PLS (3) PLS Mounting Detail for Two Contacts Mounting Detail for Two Contacts .500 [12.7] .500 [12.7] .118 [3.0] .110 [2.8] TYP. .225 [5.7] .365 [9.3] .070 [1.80] .030 [.75] DIA. TYP. TYP. .415 [10.5] CAT. NO. 593 (Male) CAT. NO. 594 (Female) CAT. NO. 635 (Male) CAT. NO. 636 (Female) BATTERY SNAP-ONS For most electronic applications requiring a quick connect and disconnect of circuit. Commonly used with 9 Volt or other batteries designed with snap fasteners. Ideal for temporary or permanent means of connecting without soldering. Can be cascaded together for multiple connections. SOCKET OR STUD ONLY SOCKET OR STUD W/CRIMP LUG FIG. 1 FIG. 2 FIG. 3 FIG. 4 DIA DIA DIA DIA H H H H L L B B Stud only Socket only Socket w/Crimp Lug Stud w/Crimp Lug CAT. FIG CAT. FIG NO. NO. DIA H B HOLE SIZE MATERIAL NO. NO. DIA H L SIZE MATERIAL 261* 1 .224 (5.7) .135 (3.4) .312 (7.9) .097 (2.5) 263* 3 .225 (5.7) .170 (4.3) .790 (20.1) Stud: Steel, Nickel Plate Junior* Steel, Nickel Plate Junior Lug: Brass, Tin Plate 269* 2 .210 (5.3) .150 (3.8) .250 (6.4) .096 (2.4) 271* 4 .205 (5.2) .200 (5.1) .790 (20.1) 262 1 .283 (7.2) .143 (3.6) .423 (10.7) .125 (3.2) 264 3 .283 (7.2) .185 (4.7) .840 (21.3) Stud: Brass, Nickel Plate Senior Brass, Nickel Plate Senior Lug: Brass, Tin Plate 270 2 .261 (6.6) .145 (3.7) .312 (7.9) .125 (3.2) 272 4 .265 (6.7) .185 (4.7) .835 (21.2) *Use Jr. Socket and stud for standard 9 Volt Battery DIMENSIONS ARE FOR REFERENCE ONLY *Use Jr. Socket and stud for standard 9 Volt Battery ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 30 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED 9 VOLT BATTERY CONTACTS 9 VOLT HOLDERS MOLDED 9 VOLT BATTERY HOLDERS Holds any size, any shape, standard 9 Volt battery. SPECIFICATIONS Eliminates need to specify an exact battery brand, Body: Molded from high impact, size or shape. Ideal for power source or memory Glass Filled Nylon back-up use in PLC, telecommunications, data Terminals: Brass, Tin Plate processing, security systems, clocks, radios, Contacts: Steel, Nickel Plate 1294 toys and appliances. 2.120 [53.9] Male-female snap-in terminals assure positive .875 [22.2] • contact and proper polarity Durable, rugged construction • 1.164 .500 [29.6] .938 Excellent spring retention — holds battery • [12.7] [23.8] in place Withstands severe shock and vibration • Operating temperature range: • .130 [3.3] DIA. .600 -40°F to +266°F (-40°C to +130°C) (4) PLS [15.2] 1295 Impervious to most industrial solvents • .187 [4.8] TAB Mounting Detail .205 [5.2] TAB .938 [23.8] .800 .450 [20.3] .130 [3.3] .875 [22.2] .750 (4) PLS. [11.4] [19.1] .600 [15.2] .080 [2.0] (2) PLS. .500 [12.7] CAT. NO. 1295 CAT. NO. 1294 PC Terminals Quick-Fit Terminals ALUMINUM 9 VOLT BATTERY HOLDERS For use with standard 9 Volt battery. Battery snaps in place to insure positive contact. Ideal where severe shock and vibration are encountered. Available with standard solder lugs or printed circuit lugs. SPECIFICATIONS Frame: Aluminum Solder Terminals: Brass, Tin Plate 1290-79 PC Terminals: Brass, Tin Plate Contacts & Clips: Steel, Nickel Plate 303-P Insulation: Resin Impregnated Polarizing Washer: Polyethylene 203-P Slide-in battery for • 1291-79 quick installation and replacement Polarity clearly marked • 1.900 [48.3] 2.000 [50.8] .218 [5.5] L 1.375 [34.9] .312 [7.9] Mounting Detail .875 1.125 [22.2] 1.125 .500 [28.6] .875 [22.2] .500 [28.6] .875 [22.3] [12.7] .130 [3.3] [12.7] (4) PLS. L 1.625 [41.3] .080 [2.0] .128 [3.25] DIA. (4) PLS (2) PLS. .128 [3.3] DIA. (4) PLS POLARIZING WASHER 1.125 [28.6] (+) BATTERY SIDE 1.125 [28.6] .500 .500 [12.7] [12.7] 1.125 [28.6] 1.125 [28.6] .500 H H [12.7] .750 [19.1] .562 .562 .500 [14.3] [14.3] [12.7] .750 1290 1291 [19.1] .500 [12.7] CAT. NO. CAT. NO. H L BATTERY REFERENCE DESCRIPTION 1291 1290 .718 (18.2) 1.375 (34.9) Alkaline Low Profile CAT. NO. 203-P CAT. NO. 303-P 1291-79 1290-79 .812 (20.6) 1.375 (34.9) Alkaline Snap Fit 1291-66 1290-66 .857 (21.8) 1.250 (31.8) Lithium-Ion Snap Fit Solder Terminals PC Terminals ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 31 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED REFER TO PAGE 8 & 10 FOR PART DIMENSIONS NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. PLEASE VERIFY YOUR BATTERY LAYOUT PRIOR TO FABRICATION. Mounting Detail “L” DIMENSION .360 [9.1] .890 [22.6] .360 [9.1] MIN. MIN. CAT. For “AAAA” For “A27” 0.33 (8.4)  1.67 (42.4) 0.300 (7.6)  10 (28.0) NO. .124 [3.1] MIN. 50 50 0.89 (22.6) 0.32 (8.1) 550 550 Pad Layout .156 [4.0] 'L' DIM. MIN. “L” DIMENSION .200 [5.1] CAT. For “AAA” For “N” For “A23” MIN. .092 0.41 (10.4)  1.75 (44.5) 0.45 (11.4)  1.14 (29.0) 0.40 (10.2)  1.10 (27.9) NO. [2.3] .671 [17.0] .156 [4.0] MIN. MIN. MIN. 55 1.80(45.7) 1.20 (30.5) 1.15 (29.2) 55 555 555 Pad Layout .156 [4.0] 'L' DIM. MIN. .200 [5.1] “L” DIMENSION MIN. .092 CAT. For For For “AA” “2/3 A” For “CR2” “1/2 AA” .662 [16.8] .156 [4.0] [2.3] MIN. MIN. MIN. 0.56 (14.2)  1.98 (50.3) 0.67 (17.0)  1.36 (34.5) 0.60 (15.2)  1.05 (26.7) 0.56 (14.2)  0.97 (24.6) NO. 53 53 2.05 (52.1) 1.38 (35.1) 1.04 (26.4) 1.04 (26.4) 553 553 “L” DIMENSION CAT. For “AAA” For “N” For “A23” NO. 0.41 (10.4)  1.75 (44.5) 0.45 (11.4)  1.14 (29.0) 0.4 (10.2)  1.10 (27.9) Pad Layout 56 1.7 (43.2) 1.1 (27.9) 1.05 (26.7) 556 .156 [4.0] 'L' DIM. MIN. “L” DIMENSION .200 [5.1] CAT. For For For For MIN. 56 “AA” “2/3 A” “CR2” “1/2 AA” .092 [2.3] .613 [15.6] .156 [4.0] NO. 0.56 (14.2)  1.98 (50.3) 0.67 (17.0)  1.36 (34.5) 0.60 (15.2)  1.05 (26.7) 0.56 (14.2)  0.97 (24.6) 556 MIN. MIN. MIN. 57 57 1.90 (48.3) 1.23 (31.2) 0.97 (24.6) 0.89 (22.6) 557 “L” DIMENSION CAT. For For For For “AA” “2/3 A” “CR2” “1/2 AA” NO. 0.56 (14.2)  1.98 (50.3) 0.67 (17.0)  1.36 (34.5) 0.60 (15.2)  1.05 (26.7) 0.56 (14.2)  0.97 (24.6) Pad Layout 5231 2.38 (60.5) 1.71 (43.4) 1.53 (24.6) 1.37 (34.8) .300 5331 .300 [7.6] 'L' DIM. [7.6] MIN. MIN. “L” DIMENSION .200 [5.1] CAT. For “AAA” For “N” For “A23” For “AAAA” 5231 MIN. NO. 0.41(10.4) 
1.75(44.5) 0.45(11.4) 
1.14(29.0) 0.40(10.2) 
1.10(27.9) 0.33(8.4) 
1.67(42.4) 5331 5230 5232 1.96 (49.8) 1.35 (34.3) 1.31 (33.3) 1.86 (47.2) “L” dimensions reflect initial insertion deflection. 5330 5330 206 Pad Layout CAT. BATTERY DIM. NO. CELL REFERENCE “L” DIMENSION .375 .375 'L' DIM. [9.5] [9.5] 206 For “AA” 0.56 (14.2)  1.98 (50.3) 1.10 (27.90) 207 For “C” 1.00 (25.4)  1.97 (50.0) 0.81 (20.60) .128 [3.25] DIA. 208 For “D” 1.30 (33.0)  2.42 (61.5) 1.25 (31.80) 207 32 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED BATTERY CONTACTS LAYOUT & MOUNTING DETAILS BATTERY CONTACTS LAYOUT & MOUNTING DETAILS REFER TO PAGE 9 FOR PART DIMENSIONS NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. VERIFY YOUR BATTERY LAYOUT PRIOR TO FABRICATION. Mounting Detail .236 .236 'L' DIM. “L” DIMENSION 51 [6.0] [6.0] CAT. For “AAAA” For “A27” 0.33 (8.4)  1.67 (42.4) 0.300 (7.6)  1.10 (28.0 NO. .055 [1.4] DIA. HOLE 51 1.07 (27.2) 0.50 (12.7) “L” DIMENSION CAT. For “AAA” For “N” For “A23” 0.41 (10.4)  1.75 (44.5) 0.45 (11.4)  1.14 (29.0) 0.40 (10.2)  1.10 (27.9) NO. 82 1.08 (27.4) 0.47 (11.9) 0.43 (10.9) 82 Mounting Detail “L” DIMENSION 92 2915 CAT. For “AA” For “2/3 A” For “CR2” For “1/2 AA” .300 .300 'L' DIM. NO. 0.56 (14.2)  1.98 (50.3) 0.67 (17.0)  1.36 (34.5) 0.60 (15.2)  1.05 (26.7) 0.56 (14.2)  0.97 (24.6) [7.6] [7.6] 52 1.32 (33.5) 0.67 (17.0) 0.39 (9.9) 0.31 (7.9) 92 1.32 (33.5) — N/A 0.31 (7.9) 52 .068 [1.7] DIA. HOLE 2915 1.32 (33.5) — N/A 0.31 (7.9) Mounting Detail .300 .300 'L' DIM. [7.6] [7.6] “L” DIMENSION .200 [5.1] CAT. For “18650” For “2/3 A” NO. 0.71 (18.4)  2.56 (65.0) 0.67 (17.0)  1.36 (34.5) 54 .072 [1.8] DIA. HOLE 54 1.85 (47.0) 0.57 (14.5) Mounting Detail 'L' DIM. 628 “L” DIMENSION .365 [9.3] .070 [1.8] CAT. For “2/3 A” For “CR2” DIA. HOLE NO. 0.67(17.0)
1.36 (34.5) 0.60 (15.2)
1.05(26.7) 595 .118 [3.0] 595 with 628 1.46 (37.1) 1.18 (30.0) Mounting Detail 'L' DIM. 637 “L” DIMENSION .395 [10.0] CAT. For “AA” For “AAA” For “1/2AA” For “N” For “A23” .110 [2.8] NO. 0.56 (14.2)
1.98(50.3) 0.41(10.4)
1.75(44.5) 0.56(14.2)
0.97(24.6) 0.45(11.4)
1.14(29.0) 0.40 (10.2)
1.10(27.9) DIA. HOLE. .156 [4.0] 637 with 629 2.11 (53.9) 1.88 (47.8) 1.10 (27.9) 1.27 (32.3) 1.23 (31.2) 629 596 “L” DIMENSION 590 597 CAT. For “AA” For “2/3 A” For “CR2” For “1/2 AA” 591 0.56(14.2)  1.98(50.3) 0.67(17.0)  1.36(34.5) 0.60 (15.2)
1.05(26.7) 0.56(14.2)  0.97(24.6) NO. Mounting Detail 596 with 590 2.07 (52.6) N/A 1.14 (29.0) 1.06 (26.9) 'L' DIM. 590 with 590 2.15 (54.6) 1.50 (38.1) 1.22 (31.0) 1.14 (29.0) .350 [8.9] “L” DIMENSION CAT. For “AAA” For “N” For “A23” .052 [1.3] DIA. HOLE 0.41(10.4)
1.75(44.5) 0.45(11.4)
1.14(29.0) 0.40(10.2)
1.10(27.9) NO. .120 [3.0] 597 with 591 1.83 (46.5) 1.22 (31.0) 1.18 (30.0) “L” dimensions reflect initial insertion deflection. 591 with 591 1.91 (48.5) 1.30 (33.0) 1.26 (32.0) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 33 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED REFER TO PAGES 12 & 13 FOR PART DIMENSIONS NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. PLEASE VERIFY YOUR BATTERY LAYOUT PRIOR TO FABRICATION. 202 295, 296 294 204 238 “L” DIMENSION FIG. For “AAA” For “N” For “12 V” For “AAAA” CAT. NO. NO. 0.41(10.4) 
1.75(44.5) 0.45(11.4) 
1.14(29.0) 0.40(10.2) 
1.10(27.9) 0.33(8.4) 
1.67(42.4) 204 with 238 1 1.87 (47.5) 1.26 (32.0) 1.22 (31.0) 1.79 (45.5) 'L' DIM. 204,238 with 295, 296 1 1.87 (47.5) 1.26 (32.0) 1.22 (31.0) 1.79 (45.5) (INSIDE) 202 with 294 1 1.87 (47.5) 1.26 (32.0) 1.22 (31.0) 1.79 (45.5) .060 [1.5] 204 with 204 2 1.97 (50.0) 1.36 (34.5) 1.32 (33.5) 1.89 (48.0) .070 [1.8] 204 with 202 2 1.97 (50.0) 1.36 (34.5) 1.32 (33.5) 1.89 (48.0) Fig. 1 Spring-Button “L” dimensions reflect initial insertion deflection. 288, 210 290, 291 292 209 228 “L” DIMENSION 'L' DIM. FIG. For For For “AA” “1/2 AA” For “CR2” “2/3 A” CAT. NO. NO. 0.56 (14.2)  1.98 (50.3) 0.56 (14.2)  0.97 (24.6) 0.60 (15.2)  1.05 (26.7) 0.67 (17.0)  1.36 (34.5) (INSIDE) 209 with 228 1 2.13 (54.1) 1.12 (28.4) 12.0 (30.5) 1.46 (37.1) 209, 228 with 290, 291 1 2.13 (54.1) 1.12 (28.4) N/A N/A .060 [1.5] 288, 210 with 292 1 2.13 (54.1) 1.12 (28.4) N/A N/A .070 [1.8] 209 with 209 2 2.27 (57.7) 1.26 (32.0) 1.34 (34.0) 1.60 (40.6) Fig. 2 Spring-Spring 209 with 288, 210 2 2.27 (57.7) 1.26 (32.0) N/A N/A “L” dimensions reflect initial insertion deflection. “L” DIMENSION 'L' DIM. CAT. For “AA” For “1/2 AA” For “CR2” For “2/3 A” 0.56 (14.2)  1.98 (50.3) 0.56 (14.2)  0.97 (24.6) 0.60 (15.2)  1.05 (26.7) 0.67 (17.0)  1.36 (34.5) NO. (OUTSIDE) 109-2 2.22 (56.4) 1.21 (30.7) 1.29 (32.8) 1.55 (39.4) 109-3 2.22 (56.4) 1.21 (30.7) 1.29 (32.8) 1.55 (39.4) 109-2 109-2 109-3 1017-1 2.19 (55.6) 1.18 (29.9) 1.26 (32.0) 1.52 (38.6) 109-3 108-2 2.22 (56.4) 1.21 (30.7) 1.29 (32.8) 1.55 (39.4) “L” DIMENSION CAT. For “AAA” For “N” For “12 V” For “AAAA” NO. 0.41(10.4) 
1.75(44.5) 0.45(11.4) 
1.14(29.0) 0.40(10.2) 
1.10(27.9) 0.33(8.4) 
1.67(42.4) “L” dimensions reflect initial insertion deflection. 1021-1 1.96 (49.8) 1.35 (34.3) 1.31 (33.3) 1.88 (47.8) 1017-1 108-2 1.99 (50.5) 1.38 (35.0) 1.34 (34.0) 1.91 (48.5) 1021-1 'L' DIM. 5206 (OUTSIDE) 5208 “L” DIMENSION CAT. For For For “AA” “1/2 AA” For “CR2” “2/3 A” 0.56 (14.2)  1.98 (50.3) 0.56 (14.2)  0.97 (24.6) 0.60 (15.2)  1.05 (26.7) 0.67 (17.0)  1.36 (34.5) NO. 5205 2.28 (57.9) 1.27 (32.3) 1.35 (34.3) 1.61 (40.8) 5205 with 5206 2.28 (57.9) 1.27 (32.3) N/A N/A 5209 5209 2.34 (59.4) 1.33 (33.8) 1.41. (35.87) 1.67 (42.4) 5209 with 5208 2.34 (59.4) 1.33 (33.8) N/A N/A “L” dimensions reflect initial insertion deflection. 5205 .055 [1.39] 'L' DIM. DIA. (2) PLS 230-1 .175 [4.4] “L” DIMENSION CAT. For “AAA” For “N” For “12 V” For “AAAA” EDGE OF 0.41(10.4) 
1.75(44.5) 0.45(11.4) 
1.14(29.0) 0.40(10.2) 
1.10(27.9) 0.33(8.4) 
1.67(42.4) NO. BOARD 230-1 1.73 (43.9) 1.12 (29.0) 1.08 (27.9) 1.65 (42.4) 34 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED BATTERY CONTACTS LAYOUT & MOUNTING DETAILS BATTERY CONTACTS LAYOUT & MOUNTING DETAILS REFER TO PAGE 14 THRU 16 FOR PART DIMENSIONS NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. VERIFY YOUR BATTERY LAYOUT PRIOR TO FABRICATION. 'L' DIM. Fig. 1 5203 5225 5213, 5214 5204 5226 “L” DIMENSION FIG. For “AAA” For “N” For “12V” For “AAAA” CAT. NO. NO. 0.41(10.4)
1.75(44.5) 0.45(11.4)
1.14(29.0) 0.40(10.2)
1.10(27.9) 0.33(8.4)
1.67(42.4) 5203 with 5225 1 1.95 (49.5) 1.34 (34.0) 1.30 (33.0) 1.87 (47.5) 5204 with 5226 1 1.95 (49.5) 1.34 (34.0) 1.30 (33.0) 1.87 (47.5) 'L' DIM. 5214, 5213 with 5203, 5225 2 1.95 (49.5) 1.34 (34.0) 1.30 (33.0) 1.87 (47.5) Fig. 2 5202, 5222 5212 5201, 5220 5210, 5211 'L' DIM. Fig. 1 5221, 5224 5227 5228 5219, 5223 “L” DIMENSION FIG. For “AA” For “1/2 AA” For “2/3 A” CAT. NO. NO. 0.56(14.2)  1.98(50.3) 0.56(14.2)  0.97(24.6) 0.67(17.0)  1.36(34.5) 'L' DIM. 5202 with 5224 1 2.23 (56.6) 1.22 (31.0) 1.61 (40.9) Fig. 2 5222 with 5221 1 2.24 (56.9) 1.23 (31.2) 1.62 (41.1) 5201 with 5223 1 2.24 (56.9) 1.23 (31.2) 1.62 (41.1) 5220 with 5219 1 2.24 (56.9) 1.23 (31.2) 1.62 (41.1) 5201, 5223 with 5210, 5211 2 2.24 (56.9) 1.23 (31.2) N/A 5222, 5221 with 5212 2 2.24 (56.9) 1.23 (31.2) N/A 5220, 5219 with 5217, 5218 2 2.24 (56.9) 1.23 (31.2) N/A 5227 with 5228 2 2.24 (56.9) 1.23 (31.2) N/A 'L' DIM. Fig. 1 5252, 5253 5242 5240 5241 5250 5251 “L” DIMENSION FIG. For “C” For “D” 0.99(25.0)  1.97(50.0) 1.30(33.0)  2.24(56.9) CAT. NO. NO. 5240 with 5241 1 2.25 (57.2) N/A 5250 with 5251 1 N/A 2.75 (69.9) 5240, 5241 with 5242 2 2.25 (57.2) N/A 'L' DIM. 5250, 5251 with 5252, 5253 2 N/A 2.75 (69.9) Fig. 2 ® Tel (718) 956-8900 • Fa (718) 956-9040 www.keyelco.com 35 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED FUSE CLIPS & HOLDERS Our comprehensive line of fuse clips, contacts and holders are ideally suited for use in today’s industrial, electronic and automotive devices. Applications include: • Delicate microcircuitry • Consumer Electronics • Telecom and Datacom devices • Mini, Standard & Maxi blade Automotive Fuses • High Shock and Vibration applications • High Amperage applications • UL approved devices Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoHS and REACH directives. We provide 3D modeling, CAD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application. FUSE CLIPS & HOLDERS 27 SECTION CONTENTS AUTOMOTIVE FUSE CLIPS CYLINDRICAL FUSE CLIPS Low Profile...........................................39-41 5mm ...........................................................44 Maxi ............................................................38 2AG thru 8AG ..................................44-45 Mini .....................................................40-41 5AG, Midget, SPF .....................................44 Standard ............................................39, 41 CYLINDRICAL FUSE HOLDERS AUTOMOTIVE FUSE HOLDERS 5mm ...........................................................42 Low Profile...........................................39-41 3AG .................................................42-43 Maxi ............................................................38 Midget, SPF, 5AG Fuse Holder.................43 Mini .....................................................40-41 SUBMINIATURE FUSE HOLDERS Standard...................................38-39, 41 Cylindrical, Rectangle ...............................43 Cylindrical Fuse Covers .............................43 MOUNTING DETAILS ........................46-49 37 AUTOMOTIVE BLADE FUSE CLIP & HOLDERS • Available for standard, mini and maxi fuse sizes • Horizontal and vertical standard blade clips and holders • Thru hole PC mountable, maintains position during • Horizontal and vertical mini blade clips and holders for for Littelfuse ATO 257 series and Bussmann ATC series wave soldering Littelfuse Low Profile Mini 897 series, Mini 297 or 997 fuses or equivalents • Holds fuse securely, even after multiple insertions series, Bussmann ATM series fuses or equivalents • Vertical maxi blade clips and holders for Littelfuse Maxi 297 • Available with orientation legs to assure proper orientation series and Bussmann MAX series fuses or equivalent. “MAXI” AUTOMOTIVE FUSE CLIP & HOLDER FOR .312 (7.9)
.032 (.80) MAXI BLADE FUSES For Littelfuse Maxi 297 series/Bussmann Max series or equivalent • Thru hole PC mountable, maintains position during wave soldering • Withstands the rigors of shock and vibration • Holder design prevents solder wicking • Holds fuse securely, even after multiple insertions SPECIFICATIONS Contacts: .020 (.51) Copper, Tin-Nickel Plate Insulator: Glass filled Nylon, UL Rated 94V-0 Current Rating: 40 Amps @ 500V AC .392 [10.0] Temperature Rating: -58ºF to+292ºF 1.410 [35.8] (-50ºC to+145ºC) .230 [5.9] .375 .422 .180 [9.5] [10.7] [4.6] .578 [14.7] .442 [11.3] .109 .180 [4.6] [2.8] .067 .136 [3.5] .106 [2.7] [1.70] Mounting Detail For Two Clips .180 [4.6] .328 .500 .328 [8.4] [12.7] [8.4] .152 [3.9] DIA. (4) PLS CAT. NO. 3555 CAT. NO. 3555-2 MODULAR AUTOMOTIVE BLADE FUSE HOLDERS FOR .205 (5.2)
.025 (.64) STANDARD BLADE FUSES • Designed for standard auto blade fuses For Littelfuse ATO 257 series/Bussmann ATC series or equivalent • Fully insulated compact design SPECIFICATIONS • Mounts easily in pre-drilled or Contacts: Brass, Tin Plate punched hole Body: Nylon • Holder has pocket to hold spare fuse Current Rating: 30 Amps @ 500V AC Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC) • Safety lever release clip will not open under shock or vibration COVER SHOWN • Fuses are installed and removed easily OPEN. • May be used individually or easily interlocked for multiple mounting .417 [10.6] .890 [22.6] 3560 (Shown with two 3560 holders, interlocked) Mounting Detail .394 [10.0] For Two Holders 3559 (14 gauge 1.067 [27.1] wire lead must .360 [9.2] be cut and spliced Mounting Detail for in-line use) .382 [9.7] .650 [16.5] .059 [1.50] .360 [9.2] x .075 [1.90] CAT. NO. 3560 (PC Mount) (2) PLS .360 [9.2] .089 [2.26] DIA. .089 [2.26] DIA. (4) PLS (2) PLS CAT. NO. 3559 (In Line) .969 [24.6] • Fully insulated fuse mount SPECIFICATIONS • Designed for standard auto blade fuses Contacts: Brass, Tin Plate Body: Nylon • Mounts easily in punched hole Current Rating: 30 Amps @ 500V AC • Fuses are installed and removed easily Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC) • May be used individually or easily interlocked for multiple mounting 1.299 [33.0] .394 [10.0] REF. Mounting Detail For Two Holders .984 [25.0] .375 [9.5] .519 [13.2] Mounting Detail .062 [1.57] (2) PLS .162 [4.1] .375 [9.5] .519 [13.2] (7) PLS .359 [9.1] .062 [1.57] .140 [3.6] .157 [4.0] .362 [9.2] .162 [4.1] (2) PLS (4) PLS (2) PLS .390 [9.9] .157 [4.0] .359 [9.1] .282 [7.2] .519 [13.2] .375 [9.6] .156 [4.0] .110 [2.8] REF. .125 [3.2] .140 [3.6] .032 [0.81] .032 [0.81] (4) PLS (2) PLS CAT. NO. 3558 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 38 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED “AUTO” FUSE CLIPS & HOLDERS “AUTO” FUSE CLIPS & HOLDERS STANDARD AUTOMOTIVE BLADE FUSE CLIPS & HOLDERS FOR .205 (5.2)
.025 (.64) STANDARD BLADE FUSES For Littelfuse ATO 257 series/Bussmann ATC series or equivalent • Holds fuse securely, even after multiple insertions • Withstands the rigors of shock and vibration • Thru hole-mount, maintains position during wave soldering • Holder design prevents solder wicking VERTICAL FUSE ENTRY .760 [19.3] SPECIFICATIONS 1.125 [28.6] Contacts: .016 (.41) Brass, Tin-Nickel Plate .175 [4.5] .175 [4.5] Insulator: Glass filled Nylon, UL Rated 94V-0 3522-2 3522-3 .125 Current Rating: 30 Amps @ 500V AC .125 [3.2] [3.2] Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC) .300 [7.6] .300 [7.6] .050 [1.27] .137 [3.5] .050 [1.27] .100 [2.6] .260 [6.6] Mounting Detail For Two Clips Mounting Detail For Two Clips .160 [4.1] .160 [4.1] (2) PLS. .200 .200 .200 [5.1] (3) PLS. [5.1] [5.1] .100 [2.6] DIA. (4) PLS .100 [2.6] DIA. (4) PLS CAT. NO. 3522-3 CAT. NO. 3522-2 VERTICAL ENTRY LOW INSERTION FORCE .125 .271 [6.9] .102 [2.6] .292 [7.4] [3.2] SPECIFICATIONS Contacts: .016 (.41) Brass .281 .250 [6.4] .330 [8.4] .437 [7.2] Current Rating: 20 Amps @ 500 VAC [11.1] Mounting Detail For Two Clips .150 [3.8] .160 [4.1] .054 [1.4] .070 .200 .200 .200 [1.78] .156 [4.0] [5.1] [5.1] [5.1] REF. .076 [1.92] .100 [2.6] DIA. (4) PLS CAT. NO. 3522 Tin-Nickel Plate CAT. NO. 3573 Matte Tin Plate 2 IN 1 FUSE HOLDER UNIVERSAL CLIP For Littelfuse ATO 257 series/Bussmann ATC series, For Littelfuse ATO 257 series/Bussmann ATC series, Littelfuse Low Profile Mini 897 series or equivalents Littelfuse Mini 297 or 997 series/Bussmann ATM series, • Low insertion force Littelfuse Low Profile Mini 897 series or equivalents • Fuse holder fully insulates clips to protect fuse from shorting • Accepts most Auto-Blade Fuses • Holder assures proper spacing and reduces assembly time • Low insertion force • Thru hole PC mountable, maintains position during wave soldering • Thru hole PC mountable, maintains position during wave soldering SPECIFICATIONS .265 [6.8] Contacts: .016 (.41) Brass, Tin-Nickel Plate Insulator:Nylon 4/6, UL Rated 94V-0 Current Rating: 20 Amps @ 500V AC .185 [4.7] .150 [3.8] .780 [19.8] Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC) .290 [7.4] .400 [10.2] .110 [2.8] Mounting Detail .062 [1.57] .134 .150 [3.8] .530 [13.5] W .027 [0.69] [3.4] .062 [1.57] (2) PLS .134 [3.4] .130 [3.3] Mounting Detail .134 [3.4] .530 [13.5] .063 [1.60] DIA. (4) PLS .134 [3.4] Fuse W CAT. NO. 3557 - Top Entry Mini .383 (9.7) .063 [1.6] DIA. (4) PLS Standard .530 (13.5) CAT. NO. 3557-2 CAT. NO. 3577 - Bottom Entry HORIZONTAL FUSE ENTRY • Designed for low height clearance applications • Fuse holder fully insulates clips to protect fuse from shorting • Fuse will be inserted parallel to board • Holder assures proper spacing and reduces assembly time • Thru hole mount, maintains position during wave soldering • Polarized legs assure proper orientation of clips onto board SPECIFICATIONS Contacts: .012 (.30) Brass, Nickel Plate Insulator: Nylon, UL Rated 94V-0 Current Rating: 15 Amps @ 500V AC Temperature Rating: -58ºF to +292ºF (-50ºC to +145ºC) .250 .062 .240 [6.10] .363 [9.2] .393 [10.0] .820 [20.8] [6.35] [1.55] .098 [2.50] .245 [6.2] Mounting Detail For Two Clips .212 .363 [9.2] [5.40] .145 [3.7] .180 [4.55] .062 [1.6] .062 .400 [10.2] .100 [2.55] (2) PLS .100 [2.6] .400 [1.55] .400 [10.15] [10.2] (2) PLS .104 [2.64] DIA. (2) PLS CAT. NO. 3550-2 CAT. NO. 3550 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 39 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED “MINI” AUTOMOTIVE FUSE CLIPS & HOLDERS For .110 (2.8)
.032 (.80) MINI BLADE FUSES For Littelfuse Mini 297 or 997 series/Bussmann ATM series or equivalent VERTICAL FUSE ENTRY Thru Hole Mount Surface Mount MATERIAL: AVAILABLE ON TAPE AND REEL .016 (.41) Brass, Matte Tin Plate Current Rating: 15 Amps @ 500V AC .236 [6.0] .079 [2.00] • Low Profile .250 [6.4] • Low Profile .079 [2.00] .125 [3.2] .197 [5.0] .125 [3.2] .091 [2.30] Mounting Detail Pad Layout .236 [6.0] (2) PLS .091 [2.30] .400 [10.2] For Two Clips For Two Clips .244 [6.2] .320 [8.2] CAT. NO. 3563 (Bulk) .320 [8.2] .094 [2.4] DIA. .091 [2.30] .400 [10.2] MIN. TYP. (4) PLS CAT. NO. 3563TR (Tape & Reel) .270 MIN. [6.9] .120 [3.1] DIA. Tape & Reel Spec’s: 24mm wide; 12mm pitch; (2) PLS .120 [3.1] DIA. .125 [3.2] CAT. NO. 3564 13 inch reel (1500 pieces per reel) SPECIFICATIONS Material: .012 (.30) Brass Insulator: Glass filled Nylon, UL Rated 94V-0 Current Rating: 15 Amps @ 500V AC Temperature Rating: -58°F to+292°F (-50°C to+145°C) .156 [4.0] .578 [14.7] .138 [3.5] .196 .187 [4.8] [5.0] .440 [11.2] .340 [8.7] .062 [1.55] .125 [3.2] .125 [3.2] Mounting Detail For Two Clips .086 [2.20] .144 [3.7] .100 [2.6] .176 [4.5] .075 [1.90] .144 .144 [3.7] [3.7] .065 [1.65] DIA. (4) PLS CAT. NO. 3544 Tin-Nickel Plate CAT. NO. 3544-2 Tin Plate • Low insertion force LOW PROFILE MINI FUSE HOLDER MINI FUSE HOLDER • Thru hole PC mountable, maintains position during wave soldering For Littelfuse Mini 297 or For Littelfuse Low Profile • Fuse holder fully insulates clips to protect fuse from shorting 997 series/Bussmann ATM Mini 897 series or equivalent • Holder assures proper spacing and reduces assembly time or equivalents SPECIFICATIONS Contacts: .016 (.41) Brass, .265 [6.8] .265 [6.73] Tin-Nickel Plate .780 [19.8] Insulator: Nylon 4/6, UL Rated 94V-0 .630 [16.00] Current Rating: 20 Amps @ 500V AC .290 [7.4] Temperature Rating: -58°F to+292°F .290 [7.37] (-50°C to+145°C) .110 [2.8] .134 .110 [2.79] .530 [13.5] [3.4] .062 [1.57] (2) PLS .134 .390 [9.9] [3.41] .062 [1.57] TYP Mounting Detail .390 Mounting Detail [9.9] .530 [13.5] .134 [3.40] .134 [3.4] Refer to page 39 for Cat. No. 3557 .063 [1.60] .063 [1.60] DIA. (4) PLS CAT. NO. 3557-2 Clip details DIA. (4) PLS CAT. NO. 3568 HORIZONTAL FUSE ENTRY For Littelfuse Mini 297 or 997 series/Bussmann ATM series or equivalent SPECIFICATIONS Contacts: .012 (.30) Brass Insulator: Nylon 6/6, UL Rated 94V-0 Current Rating: 15 Amps @ 500V AC Temperature Rating: -58°F to+292°F (-50°C to+145°C) .062 .156 [4.0] .394 .280 [7.1] .295 [7.5] .700 [17.8] [1.55] [10.0] .075 [1.90] Mounting Detail For Two Clips .228 [5.8] .212 .295 [7.5] [5.4] .046 [1.17] .145 [3.7] DIA. (2) PLS .100 [2.6] .040 .040 [1.0] .400 [10.2] .070 [1.80] [1.00] .400 .406 [10.3] (2) PLS .070 [1.8] [10.2] (2) PLS .076 [1.93] DIA. (2) PLS CAT. NO. 3549 Nickel Plate CAT. NO. 3549-2 Tin Plate ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 40 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED “AUTO” FUSE CLIPS & HOLDERS SMT “AUTO” FUSE CLIPS & HOLDERS SMT “AUTO” BLADE FUSE HOLDERS • Compatible with most vacuum and mechanical pick and place assembly systems. •One piece assembly reduces assembly time •Fully insulated clips to protect fuses against shorting. •Withstands shock and vibration. 2 in 1 FUSE HOLDER MINI FUSE HOLDER For Standard: Littelfuse: ATO series/ For Mini: Littelfuse: MIN series/ Bussmann ATC series. Bussmann ATM series or equivalent For Low Profile: Littelfuse: 891 series/ Bussmann ATM-LP series .062 [1.6] TYP. .062 [1.6] TYP. .345 [8.8] .345 [8.8] .390 .530 [13.5] [9.9] .265 [6.7] .630 [16.0] .780 [19.8] .290 [7.4] .325 [8.3] .290 [7.4] .325 [8.3] SPECIFICATIONS Mounting Detail Mounting Detail Contacts: .016 (.41) Brass, Matte Tin Plate SPECIFICATIONS Insulator: High Temperature Nylon 46, UL 94V-0 .062 [1.6] Contacts: .016 (.41) Brass, Matte Tin Plate .062 [1.6] Temperature Rating: -58°F to+292°F (-50°C to+145°C) Insulator: High Temperature Nylon 46, UL 94V-0 .350 .350 Current Rating: 20 Amps @ 500V AC Temperature Rating: -58°F to+292°F (-50°C to+145°C) [8.8] [8.8] Current Rating: 20 Amps @ 500V AC .530 .390 CAT. NO. 3587 (Bulk) CAT. NO. 3588 (Bulk) [13.5] [9.9] .111 [2.8] .111 [2.8] CAT. NO. 3587TR (Tape & Reel) CAT. NO. 3588TR (Tape & Reel) Tape & Reel Spec’s: 32mm wide, 16mm pitch, 13 inch reel (500 pieces per reel) Tape & Reel Spec’s: 32mm wide, 16mm pitch, 13 inch reel (500 pieces per reel) SMT “AUTO” BLADE FUSE CLIPS • Compatible with most vacuum and mechanical pick and • Clip with Matte-Tin plate is ideal for low temperature • Clips with Tin-Nickel plate are ideal for lead free, place assembly systems. soldering applications, for other temperature sensitive high temperature soldering applications. • Accepts standard and mini blade automotive components. blade fuses. VERTICAL ENTRY VERTICAL ENTRY HORIZONTAL ENTRY For Mini: Littelfuse: MIN series/Bussmann ATM series. For Mini: Littelfuse: MIN series/Bussmann ATM series or equivalent For Mini: Littelfuse: MIN series/Bussmann ATM series or equivalent For Standard: Littelfuse: ATO series/Bussmann ATC series. For Low Profile: Littelfuse: 891 series/Bussmann ATM-LP series .062 [1.6] .062 [1.6] .312 [7.9] .079 [2.00] .250 [6.4] .156 .125 [3.2] [4.0] .185 .250 [6.4] .150 [4.7] [3.8] .125 [3.2] .091 [2.30] .075 [1.9] .236 [6.0] (2) PLS .400 [10.2] .090 [2.3] .282 [7.2] .100 [2.5] .105 [2.7] TYP. .242 .100 [2.5] [6.14] Pad Layout For Two Clips L = .562 [14.3] FOR MINI FUSE Pad Layout For Two Clips Mounting Detail L = .750 [19.0] FOR STANDARD .320 [8.1] For Two Clips L SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS .067 .176 .110 [2.8] Material: .016 (.41) Brass, Material: .016 (.41) Brass, Material: .012 (.30) Brass, [4.5] [1.7] .092 .400 Tin-Nickel Plate Matte Tin Plate Tin-Nickel Plate [2.3] [10.2] TYP. Current Rating: 20 Amps @ .252 [6.4] Current Rating: 15 Amps @ Current Rating: 15 Amps @ .312 500V AC 500V AC 500V AC [7.9] .120 [3.0] .100 .125 .105 .067 DIA. (2) PLS. [2.5] [3.2] [2.7] CAT. NO. 3586 (Bulk) [1.7] CAT. NO. 3563 (Bulk) CAT. NO. 3569 (Bulk) .320 [8.1] CAT. NO. 3586TR (Tape & Reel) CAT. NO. 3569TR (Tape & Reel) CAT. NO. 3563TR (Tape & Reel) Tape & Reel Spec’s:16mm wide, 12mm pitch, Tape & Reel Spec’s:24mm wide, 12mm pitch, Tape & Reel Spec’s: 24mm wide, 8mm pitch, 13 inch reel (750 pieces per reel) 13 inch reel (1500 pieces per reel) 13 inch reel (2000 pieces per reel) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 41 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED 5mm x 20mm FUSE HOLDERS SLIM LINE LOW PROFILE .354 [9.0] .953 [24.2] .382 [9.7] .951 [24.2] .472 .425 .375 [12.0] [10.8] [9.6] .467 [11.9] .167 [4.3] .156 [4.0] .130 [3.3] DIA. .860 [21.9] .047 [1.20] .886 [22.5] .051 [1.30] Mounting Detail Mounting Detail • Optional cover with window protects • Low profile, space saving design .860 [21.9] .886 [22.5] and insulates fuse • Optional cover protects and insulates fuse • Flame Retardant • Flame Retardant .052 [1.30] DIA. (2) PLS .052 [1.30] DIA. (2) PLS SPECIFICATIONS SPECIFICATIONS Base & Cover: Nylon, Base & Cover: Nylon, CAT. NO. 4628 - Holder UL Rated 94V-0 CAT. NO. 4527- Holder UL Rated 94V-0 Clips: Brass, Tin Plate Clips: Brass, Tin Plate CAT. NO. 4628C - Cover only (with window) CAT. NO. 4527C - Cover only Rated: 5 Amps @ 250V AC Rated: 5 Amps @ 250V AC FULLY INSULATED PC SNAP-IN .920 [23.4] 1.142 [29.0] REF. .413 [10.5] DIA. .866 [22.0] .500 .417 [12.7] [10.6] .197 [5.0] .062 .220 .217 [5.5] [1.55] [5.6] .020 [.50] .070 [1.80] .900 [22.9] (2) PLS .047 [1.20] • Supplied unassembled .492 [12.5] .089 [2.25] • Shock resistant • Fuse can be accessed from board edge Mounting Detail • Snap-in design for wave soldering Mounting Detail • Fuse is completely enclosed, protecting .900 [22.9] • Flame Retardant use from shorting and breaking .492 [12.5] • Optional cover protects and .078 [2.00] DIA. (2) PLS insulates fuse - Cat. No. 3527C .052 [1.30] DIA. (2) PLS SPECIFICATIONS SPECIFICATIONS Base: .062 (1.57) G-10, UL Rated 94V-0 Base: PBT Contacts: Brass, Tin Plate Clips: Brass, Tin Plate CAT. NO. 4525 CAT. NO. 3527- Holder Rated: 10 Amps @ 250V AC Rated: 6.3 Amps @ 250V AC 3AG FUSE HOLDERS TERMINATION LUGS CAN BE USED PRESS-FIT, IDEAL FOR WAVE SOLDERING WITH WIRES OR PC MOUNT .430 .450 [10.9] .188 [11.4] [4.8] .281 .078 [1.98] .140 [3.6] [7.2] DIA. .300 [7.6] (2) PLS .060 DIA. HOLE [1.50] .310 1.375 [34.9] 1.000 [25.4] .125 [3.2] [7.9] 1.380 [35.1] SPECIFICATIONS SPECIFICATIONS Base: .062 (1.57) GPO-3, UL Rated 94V-0 Base: .062 (1.57) GPO-3, UL Rated 94V-0 Mounting Detail Clips: Brass, Tin Plate Clips: Brass, Tin Plate Mounting Detail Rated: 15 Amps @ 500VAC Rated: 15 Amps @ 500VAC 1.375 [35.0] 1.000 [25.4] .300 [7.6] (2) PLS CAT. NO. 3526 .140 [3.6] CAT. NO. 4245 .070 [1.78] DIA. (4) PLS .040 [1.00] Optional cover available - Cat. No. 4245C Optional cover available - Cat. No. 4245C SNAP-IN DESIGN ASSURES MOLDED CASE STABILITY DURING WAVE SOLDERING .703 [17.9] .468 [11.9] REF. .130 .420 [10.7] [3.3] .312 [7.9] DIA C'BORE 1.650 [41.9] .144 [3.7] .060 .300 [7.6] (2) PLS DIA. HOLE [1.50] 1.375 [34.9] SPECIFICATIONS SPECIFICATIONS Base: LCP, UL Rated 94V-0 Clips: .020 (.51) Brass - Base: .032 (1.57) G-10, UL Rated 94V-0 .250 [6.4] Clips: Brass, Tin Plate Nickel Plated Mounting Detail Rated: 15 Amps @ 500VAC Rated: 15 Amps @ 500 VAC 1.375 [35.0] .300 [7.6] (2) PLS CAT. NO. 4250 CAT. NO. 3523 Mounting Hole: .070 [1.78] DIA. (4) PLS Optional cover available - Cat. No. 4245C Optional cover available - Cat. No. 4245C .144 (3.7) Dia. ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 42 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED 5mm & 3AG FUSE HOLDERS FUSE HOLDERS & COVERS MIDGET, SPF (5AG) FUSE HOLDER • Designed for SPF (Solar Protection Fuse) • Optional cover will protect and insulate fuse • Flame resistant SPECIFICATIONS Base & Cover: Nylon, UL Rated 94V-0 Rated: 30 Amps Clips: .030 (.76) Brass, Matte Tin Plate Operating Temp. Range: -58°F to +292°F (-50°C to +145°C) .714 [18.14] 3576 (THM) 3574 (SMT) .200 [5.1] .714 1.695 [43.1] 1.695 [43.1] [18.2] .690 .690 [17.6] [17.5] Optional Cover Cat. No. 3576C fits Cat. No. 3576 & 3574 1.978[50.2] .125 REF. 1.500 [38.1] [3.2] .158 [4.0] Mounting Detail Mounting Detail .140 [3.6] x .050 [1.3] 1.985 [50.4] MIN. CAT. NO. 3576 - Holder CAT. NO. 3574 - Holder .200 [5.1] SQR 1.500 [38.1] MIN. (2) PLS CAT. NO. 3576C - Cover only CAT. NO. 3576C - Cover only 3AG FUSE BLOCKS SPECIFICATIONS • Available with fiberglass or phenolic base Phenolic Base: XP, Black UL Rated 94-HB • Fuse clips riveted to base for rugged applications Fiberglass Base: GPO-3 UL Rated 94 V-0 Clips: .020 (.51) Brass - Nickel Plated .625 [15.9] .250 [6.4] Rated: 15 Amps @ 500 VAC .125 [3.2] TYP. Operating Temp. Range: -58°F to +292°F (-50°C to +145°C) 1.625 BLACK FIBER- HOLDS [41.3] .140 PHENOLIC GLASS NO. OF [3.6] CAT. NO. CAT. NO. FUSES W DIA. 3536 3540 1 .500 (12.7) .453 W 3537 3541 2 1.125 (28.6) [11.5] 3538 3542 3 1.750 (44.5) 3539 3543 4 2.375 (60.3) FUSE COVERS • Made from flame retardant material .428 L [10.9] • Protects fuse from shorting and minor bumps .400 [10.2] H .098 [2.5] DIA. W HOLE (2) PLS. Can be used with clips Can be used with 1.000 [25.4] 3512, 3512P, 3517 MATERIAL: PVC, UL Listed 94V-0 clips or fuse holders and 3518 CAT. NO. FUSE SIZE L W H .375 [9.5] MATERIAL: ABS, UL Rated 94V-0 3527C 5mm
20mm .945 (24.0) .314 (8.0) .512 (13.0) CAT. NO. FUSE SIZE 3521C 2AG .787 (20.0) .295 (7.5) .452 (11.5) 3517C 5mm
20mm 4245C 3AG 1.319 (33.5) .472 (12.0) .591 (15.0) SUBMINIATURE FUSE HOLDERS SPECIFICATIONS • Reliable spring tension assures low contact resistance Base: Thermoplastic, UL Rated 94V-0 Pins: Brass, Tin Plate • Fuse holders allow for quick changing of subminiature fuses Springs: Beryllium Copper, Gold Plate Current Rating: 5 Amps @ 250V AC • Ideal for high density circuit board applications .335 (8.5)
.158 (4.0) FUSE .335 (8.5) DIA. FUSE For Littelfuse 392/395 Type TE5® For Littelfuse 370 Type TR5® Bussmann: PC Series Bussmann: BK-EFF series or equivalent or equivalent STURDI-MOUNT LOW PROFILE STURDI-MOUNT LOW PROFILE .300 [7.6] .300 [7.6] .374 [9.5] .374 [9.5] DIA. .100 [2.6] .100 [2.6] DIA. 45° 45° .200 .200 [5.1] [5.1] .200 .200 [5.1] .100 [2.6] [5.1] .169 [4.3] Mounting Detail .290 [7.4] .220 [5.6] .121 [3.1] .200 .169 [4.3] [5.1] .118 [3.0] .118 [3.0] .020 [.50] .020 [.50] DIA. (2) PLS. .039 [1.00] DIA. (2) PLS. .020 [.50] .020 [.50] DIA. DIA. (2) PLS. DIA. (2) PLS. CAT. NO. 3552 CAT. NO. 3556 CAT. NO. 3554 CAT. NO. 3553 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 43 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED FUSE CLIPS • Available for 5mm, 1AG, 2AG, 3AG, 5AG, PC THRU MOUNT TYPES Underwriters Laboratories, Inc. 7AG & 8AG sizes • Snap-fit design enhances assembly and PC retention Recognized Component Program — • Low profile, space saving for wave soldering UL File Number E354010 • Low contact resistance • Available with orientation legs to assure proper • Withstands shock and vibration PC installation
• Rated 6.3 to 30 Amps • Available with or without end stops UL file number E354010 has been assigned to Keystone • Custom designs and modifications Electronics’ fuse clips with end stops. (Refer to pages 44-45) SURFACE MOUNT & RIVET TYPES available to your specifications Indicating recognition by Underwriters Laboratories Inc. that • Available with solder lugs or quick-fit tabs they are in compliance with their component program. Refer to pages 46-47 for Fuse Clip Layout and Mounting Details .187 (4.7), .205 (5.2) 5mm PC Clips .246 .246 [6.3] [6.3] .343 [8.7] .343 [8.7] .140 [3.6] .140 [3.6] .064 3517 3518P 3512 3512P [1.65] .266 A .266 A B B [6.8] [6.8] • With snap-in PC legs MATERIAL: MATERIAL: .250 [6.4] .250 [6.4] .020 (.51) Brass, Tin Plate .020 (.51) Brass, Tin Plate Current Rating: 15 Amps Current Rating: 15 Amps CAT. NO.AB CAT. NO.AB With or Without Orientation Legs With or Without Orientation Legs 3517 .060 (1.5) .060 (1.5) 3512 .060 (1.5) .060 (1.5) Optional cover available - Cat. No. 3517C Optional cover available - Cat. No. 3517C 3518P .060 (1.5) .093 (2.4) 3512P .060 (1.5) .093 (2.4) .200 [5.1] .360 .250 .300 .437 [11.1] [9.2] [6.4] [7.6] REF. REF. .140 [3.6] .280 .200 .079 [2.00] .230 [5.9] [7.1] [5.1] .047 [1.20] .173 [4.4] .040 [1.00] .173 [4.4] .085 [2.15] MATERIAL: MATERIAL: Mounting Detail .070 [1.80] .016 (.41) Brass, Tin Plate .016 (.41) Brass, Tin Plate .200 .250 [6.4] Current Rating: 6.3 Amps Current Rating: 15 Amps [5.1] .100 [2.5] DIA. .049 [1.24] DIA. CAT. NO. 3520 CAT. NO. 3519 2AG or 5mm 5mm/3AG WITH WITHOUT PC LEGS PC LEGS .205 .197 [5.20] [5.00] .472 [12.00] REF. .288 .156 [7.30] .472 .396 [3.95] [12.00] .240 [10.05] .148 [6.10] [3.75] .067 [1.7] DIA. .043 .197 (3561, 3622 ONLY) .165 3521 3561 [1.10] [5.00] [4.2] .197 MATERIAL: .016 (.41) Brass, Tin Plate MATERIAL: .047 [1.20] [5.00] Current Rating: 15 Amps .016 (.41) Brass, Tin Plate Mounting Detail Current Rating: 15 Amps .157 [4.00] Cat. No. 3521 & Mounting Detail CAT. NO. PC LEGS END STOP 3621 Only 3521 YES YES .205 .197 [5.20] 3621 YES NO* [5.00] 3561 NO YES .062 [1.57] DIA. .047 [1.19] DIA. 3622 NO NO* CAT. NO. 3562 4AG (9/32 Dia.) 5AG (13/32 Dia.) - Solar Protection Fuse .436 [11.1] .312 [7.90] .748 [19.0] .416 [10.55] .146 [3.7] .413 [10.5] .079 [2.00] Mounting Detail MATERIAL: MATERIAL: .303 .413 .030 (.76) Brass, Tin Plate .484 [12.3] .020 (.51) Brass, Nickel Plate [7.70] [10.5] Current Rating: 30 Amps Current Rating: 15 Amps .100 [2.55] DIA. .135 [3.5] DIA. .089 [2.25] DIA. CAT. NO. 3565 (Without End Stops)* CAT. NO. 3566 *Fuse clips without end stops are not UL recognized ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 44 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED

FUSE CLIPS

FUSE CLIPS .250 (6.4) DIAMETER FUSE CLIPS
Refer to pages 46-49 for Fuse Clip Layout and Mounting Details 1AG, 3AG, 7AG, 8AG THRU HOLE MOUNT TYPES WITH SNAP-IN PC LEGS WITH SNAP-IN PC LEGS .280 [7.1] .280 [7.1] .430 [10.9] .421 [10.7] .175 [4.5] 3515 3516P .140 [3.6] .228 .064 [5.8] [1.63] MATERIAL: MATERIAL: .300 .060 [1.50] A B [7.6] .020 (.51) Brass, Tin Plate .020 (.51) Brass, Tin Plate Current Rating: 15 Amps Current Rating: 15 Amps .325 [8.5] Mounting Detail .325 CAT. NO.AB [8.3] .300 3515 .060 (1.5) .060 (1.5) .098 [2.5] DIA. [7.6] 3515P .060 (1.5) .093 (2.4) .067 [1.70] DIA. With or Without Orientation Legs CAT. NO. 3513 3516P .060 (1.5) .120 (3.0) WITH STRAIGHT PC LEGS WITH STRAIGHT PC LEGS 3510, 3511 3514, 3529 .280 WITH WITH [7.1] .312 NO END STOPS END STOPS [7.9] H .437 [11.1] 3529 3514 L .100 [2.6] .300 [7.6] .062 [1.55] .060 [1.52] .270 [6.9] MATERIAL: MATERIAL: .020 (.51) Brass, Tin Plate .020 (.51) Brass, Tin Plate .325 Current Rating: 15 Amps .335 Current Rating: 15 Amps [8.3] [8.5] CAT. NO. H L END STOPS Mounting Detail Mounting Detail 3510 .421 (10.7) .140 (3.6) NO* .270 .300 3529 .421 (10.7) .140 (3.6) YES [6.9] [7.6] 3511 .430 (10.9) .250 (6.4) NO* .067 [1.70] DIA. .067 [1.70] DIA. CAT. NO. 3530 3514 .430 (10.9) .250 (6.4) YES 1AG, 3AG, 7AG, 8AG LOW PROFILE WITH SOLDER LUG RIVET & SURFACE MOUNT TYPES .312 [7.9] .156 [4.0] .415 3533 .135 [3.5] DIA. [10.6] 3535 .100 [2.6] DIA. .280 [7.1] 3570 .312 .453 [11.5] [7.9] A MATERIAL: MATERIAL: .020 (.51) Brass, Nickel Plate .020 (.51) Brass, Nickel Plate Current Rating: 15 Amps Current Rating: 15 Amps .310 .130 [3.3] DIA. .312 [7.9] CAT. NO.AB [7.9] B 3533 Flat .656 (16.7) 3535 45° .562 (14.3) CAT. NO. 3531 (Without End Stops)* 3570 —NO TAB WITH QUICK-FIT TAB WITH OR WITHOUT END STOPS .156 [4.0] 3567 3532 .312 WITH WITH [7.9] NO END STOPS END STOPS TAB .135 [3.5] DIA. .437 .280 [7.1] 3532 3567 [11.1] MATERIAL: MATERIAL: .453 .020 (.51) Brass, Nickel Plate .020 (.51) Brass, Nickel Plate [11.5] Current Rating: 15 Amps Current Rating: 15 Amps .335 [8.5] CAT. NO. TAB CAT. NO. END STOPS .312 [7.9] .310 [7.9] .136 [3.5] DIA. 4246 .187 (4.7) 3532 YES .625 [15.9] 4247 .205 (5.2) 3567 NO* *Fuse clips without end stops are not UL recognized ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 45 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED REFER TO PAGE 44 FOR PART DIMENSIONS NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. PLEASE VERIFY YOUR FUSE LAYOUT PRIOR TO FABRICATION. FIGURE 1 Mounting Detail 'L' DIM. 3517 3517 .266 [6.8] .266 [6.8] CAT. NO. 3517 .067 [1.70] DIA. FUSE SIZE L DIM. 5mm
20mm .910 (23.1) FIGURE 2 Mounting Detail 'L' DIM. .266 [6.8] .266 [6.8] 3518P 3518P .096 [2.5] DIA. CAT. NO. 3518P .067 [1.70] DIA. FUSE SIZE L DIM. 5mm
20mm .910 (23.1) FIGURE 3 Mounting Detail 'L' DIM. .246 [6.3] .246 [6.3] 3512 3512 CAT. NO. 3512 .062 [1.6] .040 [1.02] FUSE SIZE L DIM. 5mm
20mm .910 (23.1) FIGURE 4 Mounting Detail 'L' DIM. .246 [6.3] .062 [1.57] 3512P (2) PLS 3512P CAT. NO. 3512P .246 [6.3] .095 [2.4] FUSE SIZE L DIM. (2) PLS .040 [1.02] (4) PLS 5mm
20mm .910 (23.1) FIGURE 5 Mounting Detail 'L' DIM. .130 [3.3] .130 [3.3] 3520 3520 .100 [2.6] DIA. .078 [1.98] DIA. CAT. NO. 3520 FUSE SIZE L DIM. 5mm
20mm .900 (22.9) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 46 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED FUSE CLIP LAYOUT & MOUNTING DETAILS FUSE CLIP LAYOUT & MOUNTING DETAILS REFER TO PAGE 44 FOR PART DIMENSIONS NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. VERIFY YOUR FUSE LAYOUT PRIOR TO FABRICATION. FIGURE 6 Mounting Detail 'L' DIM. 3519 3519 .200 [5.1] CAT. NO. 3519 .049 [1.24] DIA. FUSE SIZE L DIM. 5mm
20mm .650 (16.5) FIGURE 7 Mounting Detail 'L' DIM. 3521 3521 .197 [5.0] CAT. NO. 3521 FUSE SIZE L DIM. .047 [1.19] DIA. 2AG .514 (13.1) 5mm
20mm .710 (18.1) FIGURE 8 Pad Layout 3561 3561 .197 [5.0] .197 [5.0] 'L' DIM. MIN. MIN. CAT. NO. 3561 FUSE SIZE L DIM. .157 [4.0] MIN. 2AG .354 (9.0) 5mm
20mm .500 (12.7) FIGURE 9 Mounting Detail 'L' DIM. 3AG 3562 3562 .205 [5.2] .062 [1.57] DIA. CAT. NO. 3562 FUSE SIZE L DIM. 5mm
20mm .820 (20.9) 5mm 3AG ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 47 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED REFER TO PAGES 44 & 45 FOR PART DIMENSIONS NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. PLEASE VERIFY YOUR FUSE LAYOUT PRIOR TO FABRICATION. FIGURE 10 Mounting Detail 'L' DIM. 3565 .100 [2.6] DIA. FOR RIVET 3565 CAT. NO. 3565 DESIGNATION FUSE SIZE L DIM. 4AG .281 (7.1)
1.250 (31.8) 1.000 (25.4) FIGURE 11 Mounting Detail 'L' DIM. .413 [10.5] .413 [10.5] 3566 .089 [2.26] DIA. 3566 CAT. NO. 3566 DESIGNATION FUSE SIZE L DIM. SM/SS .406 (10.3)
1.375 (34.9) 1.515 (38.5) 5AG .406 (10.3)
1.500 (38.1) 1.640 (41.7) FIGURE 12 Mounting Detail 'L' DIM. .300 [7.6] .300 [7.6] 3529 3514 .067 [1.70] DIA. CAT. NO. 3510, 3511, 3513, 3514, 3529 DESIGNATION FUSE SIZE L DIM. 1AG .250 (6.4)
.625 (15.9) .750 (19.1) 7AG .250 (6.4)
.875 (22.2) 1.000 (25.4) 8AG .250 (6.4)
1.000 (25.4) 1.125 (28.6) 3AG .250 (6.4)
1.250 (31.8) 1.375 (34.9) FIGURE 13 Mounting Detail 'L' DIM. .280 [7.1] .062 [1.57] (2) PLS 3516P 3515 .280 [7.1] W .040 [1.02] (4) PLS CAT. NO. 3515, 3515P, 3516P DESIGNATION FUSE SIZE L DIM. ORIENTATION LEGS 1AG .250 (6.4)
.625 (15.9) .735 (18.7) CAT. NO. W 7AG .250 (6.4)
.875 (22.2) .985 (25.0) 3515 .062 (1.57) 8AG .250 (6.4)
1.000 (25.4) 1.100 (28.0) 3515P .095 (2.4) 3AG .250 (6.4)
1.250 (31.8) 1.360 (34.6) 3516P .122 (3.1) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 48 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED FUSE CLIP LAYOUT & MOUNTING DETAILS FUSE CLIP LAYOUT & MOUNTING DETAILS REFER TO PAGE 45 FOR PART DIMENSIONS NOTE: ALL MOUNTING DIMENSIONS ARE FOR REFERENCE ONLY. VERIFY YOUR FUSE LAYOUT PRIOR TO FABRICATION. FIGURE 14 FOR THRU HOLE MOUNT APPLICATIONS Mounting Detail 3530 3530 'L' DIM. FOR CAT. NO. 3530 DESIGNATION FUSE SIZE L DIM. .270 [6.9] 1AG .250 (6.4)
.625 (15.9) .450 (11.4) 7AG .250 (6.4)
.875 (22.2) .700 (17.8) 8AG .250 (6.4)
1.000 (25.4) .825 (21.0) .067 [1.70] DIA. 3AG .250 (6.4)
1.250(31.8) 1.075 (27.3) FIGURE 15 FOR RIVET MOUNT APPLICATIONS 3570 3535 Mounting Detail FOR CAT. NO. 3531, 3533, 3535, 3570, 4246, 4247 'L' DIM. DESIGNATION FUSE SIZE L DIM. 1AG .250 (6.4)
.625 (15.9) .450 (11.4) 7AG .250 (6.4)
.875 (22.2) .700 (17.8) .136 [3.5] DIA. 8AG .250 (6.4)
1.000 (25.4) .825 (21.0) 3AG .250 (6.4)
1.250(31.8) 1.075 (27.3) FIGURE 16 FOR SURFACE MOUNT APPLICATIONS 4247 3533 Pad Layout .312 [7.9] .312 [7.9] 'L' DIM. FOR CAT. NO. 3531, 3533, 3535, 3570, MIN. MIN. 4246, 4247 DESIGNATION FUSE SIZE L DIM. .312 [7.9] 1AG .250 (6.4)
.625 (15.9) .120 (3.0) MIN. 7AG .250 (6.4)
.875 (22.2) .365 (9.3) 8AG .250 (6.4)
1.000 (25.4) .490 (12.4) 3AG .250 (6.4)
1.250 (31.8) .740 (18.8) FIGURE 17 FOR SURFACE MOUNT APPLICATIONS Pad Layout 3567 3532 .312 [7.9] .312 [7.9] 'L' DIM. MIN. MIN. FOR CAT. NO. 3532, 3567 DESIGNATION FUSE SIZE L DIM. .335 [8.5] 1AG .250 (6.4)
.625 (15.9) .195 (5.0) MIN. 7AG .250 (6.4)
.875 (22.2) .445 (11.3) 8AG .250 (6.4)
1.000 (25.4) .570 (14.5) 3AG .250 (6.4)
1.250 (31.8) .820 (20.8) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 49 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED TERMINALS & TEST POINTS Today’s high tech electronics require space saving, low cost methods for connecting and testing circuitry. Our complete line of PC terminals, screw terminals, headers and test points are designed to meet the interconnect and testing challenges for electronic and electrical component termination points. Applications include: • Multi-Insertion applications • Replacement for pc screw edge connectors, blocks or strips • Surface mount and thru-hole PCB designs • UL approved devices Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoHS and REACH directives. We provide 3D model- ing, CAD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application. TERMINALS & TEST POINTS SECTION CONTENTS ALLIGATOR CLIPS . . . . . . . . . . . . . . . . . .61 Female . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 SCREW TERMINALS Binding Post . . . . . . . . . . . . . . . . . . . . . . .66,67 SOLDER LUGS . . . . . . . . . . . . . . . . . . . . . . . . .58 Color Coded, PC . . . . . . . . . . . . . . . . . . .62-63 SOLDERLESS TERMINALS . . . . . . .56-57 Heavy Duty . . . . . . . . . . . . . . . . .63, 65, 66 Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 TEST POINTS SEMS Screw . . . . . . . . . . . . . . . . . . . . . . . . . . .64 Color Coded . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Swage Mount . . . . . . . . . . . . . . . . . . . . .66-67 THM (Thru Hole Mount) . . . . . . . . . . .59-60 SMT (Surface Mount) . . . . . . . . . . . . . . . . . . .61 QUICK FIT TERMINALS Male . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52-54 51 .048 [1.2] .215 DIA. HOLE [5.5] TAB .062 [1.6] PC QUICK-FIT MALE TERMINALS Underwriters Laboratories, Inc. .110 (2.8) TAB Recognized Component Program — .110 [2.8] UL File Number E201546 .062 [1.55] .048 [1.20] DIA. UL file number E201546 has been assigned to .280 [7.1] .542 Keystone Electronics’ “Quick-Fit” terminals [13.8] (Refer to pages 52-54) indicating recognition by .187 [4.8] Underwriters Laboratories Inc. that they are in compliance .050 [1.27] with their component program. .045 [1.14] .156 [4.0] Underwriters Laboratories Inc. component program assures that “Quick-Fit” terminals meet the dimensional CAT. NO. MATERIAL MTG. HOLE and performance requirements of the National Electrical Manufacturers Association specification number 1267 .020 (.50) Brass, Tin Plate .046 (1.2) Dia. NEMA2-1982-(1988) and UL310. 1211 .032 (.80) Brass, Tin Plate .052 (1.3) Dia. .110 (2.8) TAB .110 (2.8) & .187 (4.8) TAB .187 (4.8) TAB STURDI-MOUNT .525 [13.4] .040 [1.0] .057 [1.45] A° .187 [4.8] .048 [1.20] .051 [1.30] .125 [3.2] DIA. DIA. .125 [3.2] .110 [2.8] .250 [6.4] .285 [7.3] .416 .200 [5.1] .570 [10.6] [14.5] .150 [3.8] .050 [1.27] .045 [1.14] .200 .220 .040 [1.00] .200 [5.1] .177 [4.5] [5.1] [5.6] .080 [2.1] .256 [6.5] Material: .020 (.50) Brass, Tin Plate Mtg Holes: .046 (1.2) Dia. .110 (2.8) TAB A .187(4.8) TAB CAT. NO. ANGLE CAT. NO CAT. NO. MATERIAL MTG. HOLES 4915* 0° 4918* CAT. NO. MATERIAL MTG. HOLES 4916* 30° 4919* 4903 .020 (.50) Brass, Tin Plate .046 (1.2) Dia. 4917* 60° 4920* 4900 .020 (.50) Brass, Tin Plate .043 (1.1) Dia. 4906 .032 (.80) Brass, Tin Plate .052 (1.3) Dia. .187 (4.8) TAB .187 (4.8) TAB .187 (4.8) TAB STURDI-MOUNT .187 [4.8] .560 [14.2] .281 [7.15] .055 [1.40] DIA. .055 .187 [4.8] .120 [3.1] [1.40] .125 [3.2] .055 [1.40] DIA. DIA. .250 [6.4] .125 [3.2] .187 [4.8] .250 [6.4] H .340 [8.7] .510 [13.0] .150 [3.8] .150 [3.8] .140 [3.6] .050 [1.27] .245 [6.2] .120 .200 [5.1] .045 [1.14] .050 [1.27] .050 [1.27] [3.1] .045 [1.14] REF. .200 [5.1] .045 [1.14] .200 [5.1] Material: Brass, Tin Plate MATL MTG. CAT. NO. H THICK HOLES CAT. NO. MATERIAL MTG. HOLES CAT. NO. MATERIAL MTG. HOLES 1285 .500 (12.7) .020 (.50) .046 (1.2) Dia. 1285-ST .020 (.50) Brass, Tin Plate .046 (1.2) Dia. 1212 .500 (12.7) .032 (.80) .052 (1.3) Dia. 4904 .020 (.50) Brass, Tin Plate .046 (1.2) Dia. 1216 .860(21.8) .032(.80) .052(1.3) Dia. 1212-ST .032 (.80) Brass, Tin Plate .052 (1.3) Dia. 4907 .032 (.80) Brass, Tin Plate .052 (1.3) Dia. .205 (5.2) TAB .205 (5.2) TAB .205 (5.2) TAB STURDI-MOUNT .281 [7.15] .560 [14.2] .205 [5.2] .205 [5.2] .125 [3.2] .070 [1.80] DIA. .070 [1.80] .070 [1.80] DIA. DIA. .125 [3.2] .125 [3.2] .250 [6.4] .250 [6.4] .205 [5.2] .500 .340 [8.7] .510 [12.7] [13.0] .150 [3.8] .140 [3.6] .150 [3.8] .250 [6.4] .120 .050 [1.27] .050 [1.27] [3.1] .050 [1.27] .200 [5.1] .045 [1.14] .200 [5.1] REF. .045 [1.14] .200 [5.1] .045 [1.14] CAT. NO. MATERIAL MTG. HOLES CAT. NO. MATERIAL MTG. HOLES CAT. NO. MATERIAL MTG. HOLES 4905* .020 (.50) Brass, Tin Plate .046 (1.2) Dia. 1286 .020 (.50) Brass, Tin Plate .046 (1.2) Dia. 1286-ST .020 (.50) Brass, Tin Plate .046 (1.2) Dia. 4909* .032 (.80) Brass, Tin Plate .052 (1.3) Dia. 1213 .032 (.80) Brass, Tin Plate .052 (1.3) Dia. 1213-ST .032 (.80) Brass, Tin Plate .052 (1.3) Dia. * Not UL Recognized ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 52 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PC QUICK-FIT TERMINALS PC QUICK-FIT TERMINALS .250 [6.4] .062 [1.6] DIA. .178 [4.5] .312 [7.9] .250 (6.4) PC QUICK-FIT MALE TABS .250 (6.4) TAB .250 (6.4) TAB DUAL .110 (2.8)/.250 (6.4) TAB STURDI-MOUNT .312 [7.9] .312 [7.9] .312 [7.9] .250 [6.4] .250 [6.4] .062 [1.57] .250 [6.4] .110 [2.8] .070 [1.80] DIA. .070 [1.80] DIA. .048 [1.20] DIA. .178 [4.5] .178 [4.5] .178 [4.5] .312 .280 .312 .371 .371 .312 [7.9] [7.9] [7.9] [7.1] .552 [9.4] [9.4] .552 .552 [14.0] [14.0] [14.0] .150 [3.8] .150 [3.8] .150 [3.8] .120 .050 [1.27] [3.1] .050 [1.27] .050 [1.27] .200 [5.1] REF. .200 [5.1] .045 [1.14] .200 [5.1] .045 [1.14] .045 [1.14] CAT. NO. MATERIAL MTG. HOLES CAT. NO. MATERIAL MTG. HOLES CAT. NO. MATERIAL MTG. HOLES 1287 .032 (.80) Brass, Tin Plate .052 (1.3) Dia. 1287-ST .032 (.80) Brass, Tin Plate .052 (1.3) Dia. 1282 .032 (.80) Brass, Tin Plate .052 (1.3) Dia. .250 (6.4) TAB .250 (6.4) TAB .250 (6.4) TAB STURDI-MOUNT STURDI-MOUNT STURDI-MOUNT .040 [1.02](3) .250 [6.4] .156 .250 [6.4] .070 [1.80] [4.0] .070 [1.80] DIA. DIA. .156 [4.0] .430 [10.9] .125 [3.2] .312 .537 .379 [9.7] [7.9] [13.7] CAT NO. .273 [7.0] CAT NO. 4914 A .438 4901 .200 [5.1] [11.2] .610 .280 [7.1] [15.5] A .172 [4.4] .312 .200 .187 [7.9] [4.8] .138 [3.5] [5.1] .060 [1.52] .187 [4.8] .335 .060 [1.52] .138 [3.5] [8.5] MATERIAL: .032 (.80) Brass, Matte Tin Plate MATERIAL: .032 (.80) Brass, Matte Tin Plate CAT. NO. ANGLE A MTG. HOLES 4910 0° CAT. NO. ANGLE A MTG. HOLES CAT. NO. MATERIAL MTG. HOLES 4908 30° .052 (1.3) Dia. 4901 0° .067 (1.7) Dia. 4902 .032 (.80) Brass, Tin Plate .067 (1.7) Dia. 4914* 90° 4912 60° .250 (6.4) TAB .250 (6.4) TAB .250 (6.4) TAB STURDI-MOUNT .250 [6.4] .070 [1.80] DIA. .312 [7.9] .178 [4.5] .250 [6.4] .312 [7.9] .312 [7.9] .070 [1.80] DIA. .250 [6.4] .125 [3.2] .178 [4.5] .070 [1.80] DIA. .178 [4.5] 1.220 L [31.0] .515 .470 [13.1] [12.0] .710 [18.1] .312 [7.9] .150 [3.8] .091 [2.3] .150 [3.8] .150 [3.8] .050 [1.27] .120 .050 [1.27] .045 [1.14] .050 [1.27] .200 [5.1] [3.1] .045 [1.14] REF. .200 [5.1] .200 [5.1] .045 [1.14] MATERIAL: .032 (.80) Brass, Matte Tin Plate CAT. NO. “L” MTG. HOLES CAT. NO. MATERIAL MTG. HOLES CAT. NO. MATERIAL MTG. HOLES 1289 .540 (13.7) .067 (1.7) Dia. 1289-ST .032 (.80) Brass, Tin Plate .052 (1.3) Dia. 1281 .032 (.80) Brass, Tin Plate .052 (1.3) Dia. 1292 .710 (18.0) .250 (6.4) TAB .250 (6.4) TAB .250 (6.4) TAB .590 [15.0] .985 [25.0] .789 [20.1] .106 [2.7] .178 [4.5] .070 [1.80] .070 [1.80] DIA. .178 [4.5] .070 [1.80] DIA. .040 [1.00] DIA. .178 [4.5] DIA. .250 [6.4] .250 [6.4] .250 [6.4] .350 [8.9] .350 [8.9] .280 [7.1] .110 [2.8] .312 [7.9] .150 [3.8] .150 [3.8] .312 [7.9] .437 .056 [1.42] [11.1] .050 [1.27] .093 [2.4] .051 [1.30] .200 [5.1] .045 [1.14] .200 [5.1] .580 [14.8] .312 [7.9] CAT. NO. MATERIAL MTG. HOLES CAT. NO. MATERIAL MTG. HOLES CAT. NO. MATERIAL MTG. HOLES 4966 .032 (.80) Brass, Tin Plate .056 (1.4) Dia. 1266 .032 (.80) Brass, Tin Plate .052 (1.3) Dia. 1265* .032 (.80) Brass, Tin Plate .106 (2.7) Dia. * Not UL Recognized ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 53 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED .250 (6.4) “STURDI-MOUNT” PC QUICK-FIT HEADERS AVAILABLE IN BRASS OR STEEL TABS • Ideal for rugged multi-insertion applications SPECIFICATIONS • Pre-assembled header reduces PC assembly costs Material: .032 (.80) Brass or Steel, Tin Plated • Increases PC board retention strength Insulator: Thermoplastic, UL Rated 94V-0 • Keeps terminals perpendicular Current Rating: 15 Amps @ 500V AC • Maintains position for wave soldering Temperature Rating: -58°F to +292°F (-50°C to +145°C) HORIZONTAL VERTICAL LOW PROFILE .250 [6.3] L .250 [6.4] L .787 [20.0] L .827 [21.0] .591 [15.0] .433 [11.0] .138 [3.5] .250 [6.4] .157 [4.0] .157 [4.0] .045 [1.1] .039 [1.0] .045 [1.1] .200 [5.1] .197 [5.0] .200 [5.1] .197 [5.0] .200 [5.1] .200 [5.1] BRASS STEEL BRASS STEEL BRASS STEEL NO. NO. NO. TABS TABS TABS TABS TABS TABS OF L OF L OF L CAT. NO. CAT. NO. TABS DIM. CAT. NO. CAT. NO. TABS DIM. CAT. NO. CAT. NO. TABS DIM. 7802 7822 2 .362 (8.2) 7812 7832 2 .362 (8.2) 7817 7827 2 .320 (8.1) 7803 7823 3 .562 (14.3) 7813 7833 3 .562 (14.3) 7818 7828 3 .517 (13.1) 7804 7824 4 .762 (19.4) 7814 7834 4 .762 (19.4) 7819 7829 4 .713 (18.1) 7805 7825 5 .962 (24.4) 7815 7835 5 .962 (24.4) 7820 7830 5 .910 (23.1) 7806 7826 6 1.162 (29.5) 7816 7836 6 1.162 (29.5) 7821 7831 6 1.107 (28.1) RIVET MOUNT QUICK-FIT TERMINALS • UL recognized bright brass Quick-Fit terminals • Designed for repeated mating cycles • Rivet mount male tab versions meet NEMA 2-E201546 & UL 310 specifications • For tabs 0.110 (2.8mm) to 0.250 (6.4mm) .110 (2.8) - .187(4.8) - .250 (6.4) TABS .110 (2.8) - .187 (4.8) - .250 (6.4) TABS HOLE HOLE TAB W W TAB L A° A° L BRIGHT BRASS MATTE TIN BRIGHT BRASS MATTE TIN A = 45° A = 90° A = 45° A = 90° A = 45° A = 90° A = 45° A = 90° TAB MAT’L L W HOLE TAB MAT’L L W HOLE CAT. NO. CAT. NO. SIZE THICK TAB WIDTH DIA. CAT. NO. CAT. NO. CAT. NO. CAT. NO. SIZE THICK TAB WIDTH DIA. CAT. NO. CAT. NO. 2004 2002 .110 (2.8) .020 (.51) .365 (9.3) .180 (4.6) .096 (2.4) 1233 1220 2005 2003 .110 (2.8) .020 (.51) .360 (9.1) .180 (4.6) .096 (2.4) 1240 1227 1271 1261 .187 (4.8) .020 (.51) .375 (9.5) .250 (6.4) .100 (2.5) 1234 1221 1263 1262 .187 (4.8) .020 (.51) .315 (8.0) .250 (6.4) .100 (2.5) 1241 1228 1280 1256 .250 (6.4) .032 (.81) .406 (10.3) .306 (7.8) .130 (3.3) 1235 1222 1258 1257 .250 (6.4) .032 (.81) .400 (10.1) .306 (7.8) .130 (3.3) 1242 1229 .110 (2.8) TAB .187 (4.8) - .205 (6.4) TABS MULTIPLE .250 (6.4) TAB .130 [3.3] .250 [6.4] .110 [2.8] .375 [9.5] TAB 45° .062 .048 [1.20] HOLE [1.55] .406 DIA. [10.3] .250 [6.4] .619 [15.7] .109 [2.7] .296 [7.5] REF. .343 DIA. .375 .343 L [9.5] [8.7] [8.7] .125 [3.2] .109 [2.8] .265 .135 [3.4] DIA. BRIGHT .218 [6.7] MATERIAL: .032 (81) Bright Brass [5.5] BRASS CAT TAB NO. PAIRS L SIZE 45° TAB MATERIAL: .020 (.51) Brass, Tin Plate MATERIAL: .020 (.51) Brass, Tin Plate 1005 2 .687 (17.4) CAT. NO. TAB HOLE CAT. NO. ANGLE 1006 3 1.062 (27.0) .250 (6.4) 1269 0° 4005 .205 (5.2) .132 (3.4)
.070 (1.78) Slot 1007 4 1.441 (36.6) 1270 30° 4095 .187 (4.7) .078 (1.98) Dia. Hole 1008 5 1.820 (46.2) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 54 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED QUICK-FIT TERMINALS FEMALE PC QUICK-FIT TERMINALS PC QUICK-FIT FEMALE TERMINALS ACCEPTS .110 (2.8)
.032 (.81) TAB ACCEPTS ALL TABS .110 (2.8) TO .50 (6.4)
.020 (.50) TO .032 (.80) SMT - HORIZONTAL ENTRY SMT - VERTICAL OR HORIZONTAL ENTRY .156 .250 .150 [3.8] .185 [4.7] [4.0] [6.4] .282 [7.2] .250 [6.4] .090 [2.3] .105 .075 [1.9] [2.7] .100 [2.5] .062 [1.6] .100 [2.54] .312 [7.9] .242 [6.2] .176 [4.5] SPECIFICATIONS SPECIFICATIONS Mounting Detail Material: .012 (.30)Brass, Tin-Nickel Plate Material: .016 (.40)Brass, Tin-Nickel Plate Mounting Detail Current Rating: 15 Amps @ 500V AC Current Rating: 15 Amps @ 500V AC .067 [1.7] TYP. CAT. NO. 3569* (Bulk) CAT. NO. 3586* (Bulk) .105 [2.7] .067 [1.7] Underwriters Laboratories, Inc. .312 [7.9] .105 [2.7] CAT. NO. 3569TR* (Tape & Reel) CAT. NO. 3586TR* (Tape & Reel) Recognized Component Program .252 Tape & Reel Spec’s: 24mm wide, 8mm pitch, Tape & Reel Spec’s: 16mm wide, 12mm pitch, .100 [2.6] [6.4] — UL File Number E201546 13 inch reel (2000 pieces per reel) 13 inch reel (750 pieces per reel) ACCEPTS ALL TABS ACCEPTS .187 (4.8), .205 (5.2), .250 (6.4) TAB .110 (2.8) TO .50 (6.4)
.020 (.50) TO .032 (.80) HORIZONTAL ENTRY .250 VERTICAL OR HORIZONTAL ENTRY .062 W [6.4] [1.55] .098 [2.5] .150 [3.8] .185 [4.7] .212 [5.4] 3557 3577 .400 A .062 [10.2] .100 [2.5] [1.55] .150 [3.8] .400 [10.2] .062 [1.6] .134 [3.4] MATERIAL: Brass, Tin-Nickel Plate .032 [0.8] CAT. MATL Mounting Detail NO. ACCEPTS TAB “W” “A” THICK Cat. No. 3577 MATERIAL: Mounting Detail Mounting Detail 3571 .187(4.8)
.020(.51) .016 (.41) Brass, Tin-Nickel Plate .134 [3.4] Cat. No. 3557 .222 (5.6) .162 (4.1) .012 (.30) .067 [1.7] 3572* .187(4.8)
.032(.81) .400 [10.1] DIA. (2)PLS. .134 [3.4] CAT. NO. ORIENTATION .062 [1.6] 3546 .205(5.2)
.020(.51) TERMINAL .240 (6.1) .180 (4.6) .012 (.30) 3557 top & side entry 3550 .205(5.2)
.032(.81) .104 [2.6] DIA. CLEARENCE .067 [1.7] .040 [1.0] DIA. (2)PLS. .067 [1.70] DIA. 3577* bottom entry 3547 .250(6.4)
.032(.81) .291 (7.4) .205 (5.2) .016 (.41) ACCEPTS .110 (2.8) TAB ACCEPTS .110 (2.8) TAB ACCEPTS .187 (4.8) TAB VERTICAL ENTRY VERTICAL ENTRY HORIZONTAL ENTRY .156 [4.0] .232 [5.9] .146 [3.7] .196 [5.0] .420 .440 [10.7] [11.2] .156 [4.0] .062 .280 [7.1] [1.55] .150 [3.8] .125 [3.2] .075 [1.90] .144 .062 [1.55] .050 [1.25] [3.7] .212 .086 [2.2] .200 [5.1] [5.4] .100 [2.5] W (Ref) .040 W (Ref) [1.00] .400 [10.2] .070 [1.80] MATERIAL: MATERIAL: .016 (.41) Brass, Tin-Nickel Plate .012 (.30) Brass, Tin-Nickel Plate Mounting Detail Mounting Detail MATERIAL: CAT. NO. ACCEPTS TAB “W” .012 (.30) Brass, Tin-Nickel Plate CAT. Mounting Detail ( ) ( ) .200 [5.1] .400 [10.1] 3548 .187 4.8
.020 .51 .093 (2.36) NO. ACCEPTS TAB W .144 [3.7] CAT. NO. ACCEPTS TAB 3578* .187(4.8)
.020(.51) .093 (2.36) 3534 .110(2.8)
.020(.51) .070 (1.80) 3545 .110 (2.8)
.020 (.51) .076 [1.9] DIA. 3551 .187(4.8)
.102 (2.59) .052 [1.30] DIA. .032(.81) .046 [1.15] DIA. 3544 .075 (1.92) 3549 .110 (2.8)
.032 (.81) .110(2.8)
.032(.81) .065 [1.30] DIA. *Low insertion force design ACCEPTS .205 (5.2) TAB ACCEPTS .250 (6.4) TAB ACCEPTS .312 (7.9) TAB VERTICAL ENTRY VERTICAL ENTRY OVER SIZED .392 [10.0] .291 [7.4] .271 [6.9] .250 .250 .375 [6.3] .281 [7.1] .422 [6.3] .281 [7.1] .437 [9.5] .437 [10.7] [11.1] [11.1] .578 [14.7] .050 [1.3] .110 [2.8] .070 [1.80] .120 [3.0] .109 .091 [2.3] .180 [4.6] [2.8] .076 [1.90] .106 [2.7] .125 [3.2] .125 [3.2] .180 [4.6] MATERIAL: .016 (.41) Brass, Tin-Nickel Plate Mounting Detail Mounting Detail Mounting Detail MATERIAL: CAT. .016 (.41) Brass, Tin-Nickel Plate .200 [5.1] NO. ACCEPTS TAB .200 [5.1] .328 [8.35] MATERIAL: .020 (.51) Copper, Tin-Nickel Plate 3525 .205 (5.2)
.020 (.51) CAT. NO. ACCEPTS TAB .089 [2.3] .100 [2.54] DIA. 3575* .205 (5.2)
.032 (.81) 3528 .250 (6.4)
.032 (.81) .152 [3.86] DIA. CAT. NO. 3555 * Not UL Recognized ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 55 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED QUICK-FIT FEMALES VINYL BOOT FEMALE NON-INSULATED For .250 (6.4) QUICK-FITS • Easily slips over terminal • Insulates and protects L TAB SIZE .920 [23.4] MATERIAL: Tinned Brass Boot and Quick-Fit sold separately MATES WITH MALE TAB CAT. AWG MAT’L CAT. BOOT .354 [9.0] WIDTH
THICK NO. L SIZE THICK NO. COLOR .298 [7.6] 1252 .110 (2.8)
.020 (.51) .640 (16.3) 18-22 .010 (.25) 4471 CLEAR .187 .131 [3.3] 1264 .187 (4.8)
.020 (.51) .576 (14.6) 16-22 .013 (.33) [4.7] 4472 RED 4469 .205 (5.2)
.020 (.51) .640 (16.3) 16-20 .013 (.33) 4473 BLUE .140 [3.5] DIA. 4474 YELLOW SOLDERLESS QUICK-FIT TERMINALS SPECIFICATIONS: Terminals: EPT Copper Insulation: Vinyl (Non-RoHS Compliant) RoHS MALE NON-INSULATED FEMALE NON-INSULATED L L L WIDTH WIDTH WIDTH FIG. 1 FIG. 2 WIRE CAT. RANGE MALE TAB BARREL WIRE MATES WITH BARREL CAT. RANGE MALE TAB .250 (6.4) NO. (AWG) FIG. WIDTH
THICK L LENGTH I.D. NO. (AWG) WIDTH
THICK L I.D. 8281 2 .187 (4.8)
.020 (.51) .64 (16.3) .24 (6.3) .080 (2.03) 22 18 / 8272 .187 (4.8)
.020 (.51) .58 (14.7) .085 (2.16) 8282 1 .250 (6.4)
.032 (.81) .73 (18.5) .25 (6.4) .065 (1.65) 22 18 / 8273 .250 (6.4)
.032 (.81) .66 (16.8) .080 (2.03) 8283 2 .187 (4.8)
.020 (.51) .64 (16.3) .24 (6.3) .080 (2.03) 16 14 / 8274 .187 (4.8)
.020 (.51) .58 (14.7) .085 (2.16) 8284 1 .250 (6.4)
.032 (.81) .73 (18.5) .25 (6.4) .085 (2.16) 16 14 / .250 (6.4)
.032 (.81) .66 (16.8) .080 (2.03) 8275 8285 12 10 1 .250 (6.4)
.032 (.81) .75 (19.1) .25 (6.4) .150 (3.8) / MALE VINYL INSULATED FEMALE VINYL INSULATED L L WIDTH WIDTH WIRE MATES WITH BARREL MAX WIRE MAX CAT. RANGE MALE TAB .250 (6.4) INSULATION CAT. RANGE MALE TAB BARREL INSULATION DIAMETER DIAMETER NO. (AWG) WIDTH
THICK L I.D. NO. (AWG) WIDTH
THICK L LENGTH I.D. 8276 .187 (4.8)
.020 (.51) .78 (19.8) .085 (2.16) 8286 22 18 .187 (4.8)
.020 (.51) .85 (21.6) .24 (6.3) .080 (2.03) .145 (3.7) 22/18 / .145 (3.7) (Red) (Red) 8277 .250 (6.4)
.032 (.81) .87 (22.1) .080 (2.03) 8287 .250 (6.4)
.032 (.81) .93 (23.6) .25 (6.4) .065 (1.65) .145 (3.7) 8278 .187 (4.8)
.020 (.51) .78 (19.8) .085 (2.16) 8288 .187 (4.8)
.020 (.51) .85 (21.6) .24 (6.3) .080 (2.03) .145 (3.7) 16 14 16/14 / .145 (3.7) (Blue) 8279 (Blue) .250 (6.4)
.032 (.81) .87 (22.1) .080 (2.03) 8289 .250 (6.4)
.032 (.81) .93 (23.6) .25 (6.4) .085 (2.16) .170 (4.3) 12 10 12/10 / 8290 .250 (6.4)
.032 (.81) 1.05 (26.7) .25 (6.4) .150 (3.8) .250 (6.4) 8280 .250 (6.4)
.032 (.81) .96 (24.4) .165 (4.2) .250 (6.4) (Yellow) (Yellow) MALE FULLY INSULATED NYLON FEMALE FULLY INSULATED NYLON D L D L W WIDTH WIDTH W WIRE BARREL MAX. WIRE MATES WITH BARREL MAX. CAT. RANGE MALE TAB .250 (6.4) INSUL. CAT. RANGE MALE TAB .250 (6.4) INSUL. NO. (AWG) WIDTH
THICK L W D I.D. DIA. NO. (AWG) WIDTH
THICK L W D LENGTH I.D. DIA. 8296 .187 (4.8)
.020 (.51) .87 (22.1) .37 (9.4) .30 (7.6) .24 (6.3) .080 (2.03) .145 (3.7) 8291 .187 (4.8)
.020 (.51) .81 (20.6) .30 (7.6) .23(5.8) .085 (2.16) .145 (3.7) 22/18 22 18 / (Red) 8297 .250 (6.4)
.032 (.81) .95 (24.1) .44(11.2) .30 (7.6) .25 (6.4) .065 (1.65) .145 (3.7) 8292 (Red) .250 (6.4)
.032 (.81) .87 (22.1) .37 (9.4) .23(5.8) .080 (2.03) .145 (3.7) 8298 16 14 .187 (4.8)
.020 (.51) .87 (22.1) .37 (9.4) .30 (7.6) .24 (6.3) .080 (2.03) .170 (4.3) 8293 .187 (4.8)
.020 (.51) .81 (20.6) .30 (7.6) .23(5.8) .085 (2.16) .145 (3.7) / 16 14 / (Blue) 8299 .250 (6.4)
.032 (.81) .95 (24.1) .44(11.2) .30 (7.6) .25 (6.4) .085 (2.16) .170 (4.3) 8294 (Blue) .250 (6.4)
.032 (.81) .87 (22.1) .37 (9.4) .23(5.8) .080 (2.03) .170 (4.3) 12 10 / 12 10 / 8300 .250 (6.4)
.032 (.81) 1.05 (26.7) .47 (11.9) .39 (9.9) .25 (6.4) .150 (3.8) .250 (6.4) 8295 .250 (6.4)
.032 (.81) .99 (25.1) .39 (9.9) .32(8.1) .165 (4.2) .250 (6.4) (Yellow) (Yellow) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 56 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SOLDERLESS TERMINALS SOLDERLESS TERMINALS Indentor-type crimping die for non-insulated terminals Confined dies for insulated ter Anvil-type wire cutter is precision ground Precision ground scissors action Crimping die for wire cutter “F” type crimping die 7-8 mm non-insulated terminals W for automotive terminals auge Threaded bolt cutter u 8 WG) for five common sizes SOLDERLESS TERMINALS SPECIFICATIONS: Terminals: EPT Copper Insulation: Vinyl (Non-RoHS Compliant) RoHS RING TONGUE NON-INSULATED RING TONGUE INSULATED L L .250 [6.4] W W E E BARREL WIRE FOR WIRE FOR .250 (6.4) MAX. BARREL RANGE STUD MATL CAT. RANGE STUD MATL LONG INSUL. CAT. NO. (AWG) SIZE W L E THICK I.D. NO. (AWG) SIZE W L E THICK I.D. DIA. 8200 6 .25 (6.4) .60 (15.2).47 (11.9) 8209 6 .25 (6.4) .80 (20.3) .67 (17.0) 22 18 / 8201 22 18 8 .33 (8.4) .70 (17.8) .54 (13.7) .030 (.76) .070 (1.78) / 8210 8 .33 (8.4) .90 (22.9) .74 (18.8) .030 (.76) .070 (1.78) .145 (3.7) (Red) 8202 10 .33 (8.4) .70 (17.8) .54 (13.7) 8211 10 .33 (8.4) .90 (22.9) .74 (18.8) 8203 6 .25 (6.4) .60 (15.2).47 (11.9) 8212 6 .25 (6.4) .80 (20.3) .67 (17.0) 16 14 / 8204 16 14 8 .33 (8.4) .70 (17.8) .54 (13.7) .030 (.76) .090 (2.29) / 8213 8 .33 (8.4) .90 (22.9) .74 (18.8) .030 (.76) .090 (2.29) .170 (4.3) (Blue) 8205 10 .33 (8.4) .70 (17.8) .54 (13.7) 8214 10 .33 (8.4) .90 (22.9) .74 (18.8) 8206 6 .28 (7.1) .68 (17.3) .54 (13.7) 8215 6 .28 (7.1) .98 (24.9) .84 (21.3) 12 10 / 8207 12/10 8 .38 (9.7) .73 (18.5).54 (13.7) .040 (1.02).135 (3.4) 8216 8 .38 (9.7) 1.03 (26.2) .84 (21.3) .040 (1.02).135 (3.4) .250 (6.4) (Yellow) 8208 10 .38 (9.7) .73 (18.5).54 (13.7) 8217 10 .38 (9.7) 1.03 (26.2) .84 (21.3) BLOCK SPADE NON-INSULATED BLOCK SPADE INSULATED L L .250 [6.4] W W Flanged Flanged E E BARREL WIRE FOR .250 (6.4) MAX. FLANGED FLANGED WIRE FOR RANGE STUD MATL LONG INSUL. CAT. CAT. MATL CAT. CAT. RANGE STUD BARREL NO. (AWG) SIZE W L E THICK I.D. DIA. NO. (AWG) SIZE W L E THICK I.D. NO. NO. 8218 6 8236 8227 6 8245 22 18 / 8219 22/18 8 .30 (7.6) .65 (16.5) .50 (12.7) .030 (.76) .090 (2.29) 8237 8228 8 .30 (7.6) .85 (21.6) .70 (17.8) .030 (.76) .070 (1.78) .145 (3.7) 8246 (Red) 8220 10 8238 8229 10 8247 8221 6 8239 8230 6 8248 16 14 / 8222 16/14 8 .30 (7.6) .65 (16.5) .50 (12.7) .030 (.76) .090 (2.29) 8240 8231 8 .30 (7.6) .85 (21.6) .70 (17.8) .030 (.76) .090 (2.29) .175 (4.4) 8249 (Blue) 8223 10 8241 8232 10 8250 8224 6 8242 8233 6 8251 12 10 / 8225 12/10 8 .32 (8.1) .73 (18.5) 54 (13.7) .040 (1.02) .135 (3.4) 8243 8234 8 .32 (8.1) 1.03 (26.2) .84 (21.3) .040 (1.02) .135 (3.4) .255 (6.5) 8252 (Yellow) 8226 10 8244 8235 10 8253 SNAP SPADE NON-INSULATED SNAP SPADE INSULATED L L .250 [6.4] W W E E BARREL WIRE FOR .250 (6.4) MAX. WIRE FOR RANGE STUD MATL LONG INSUL. CAT. RANGE STUD MATL BARREL CAT. NO. (AWG) SIZE W L E THICK I.D. DIA. NO. (AWG) SIZE W L E THICK I.D. 8263 6 .25 (6.4) 8254 6 .25 (6.4) 22 18 / 8264 8 .30 (7.6) .88 (22.4) .70 (17.8) .030 (.76) .070 (1.78) .145 (3.7) 8255 22 18 8 .30 (7.6) .68 (17.3) .50 (12.7) .030 (.76) .070 (1.78) / (Red) 8265 10 .32 (8.1) 8256 10 .32 (8.1) 8266 6 .25 (6.4) 8257 6 .25 (6.4) 16 14 / 8267 8 .30 (7.6) .88 (22.4) .70 (17.8) .030 (.76) .090 (2.29) .170 (4.3) 8258 8 .30 (7.6) (Blue) 16 14 .68 (17.3) .50 (12.7) .030 (.76) .090 (2.29) / 8268 10 .32 (8.1) 8259 10 .32 (8.1) 8269 6 .28 (7.3) 8260 6 .28 (7.3) 12 10 / 8270 8 .32 (8.1) 1.03 (26.2) .83 (21.2) .040 (1.02) .135 (3.4) .250 (6.4) 8261 12/10 8 .32 (8.1) .73 (18.5) .53 (13.6) .040 (1.02) .135 (3.4) (Yellow) ( ) 8271 10 .32 8.1 8262 10 .32 (8.1) HAND CRIMP TOOL trapezoid-type crimping minals Slots for looping solid wire ire Stripper is also handy wire g CAT. NO. 1345 (22 thr A ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 57 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PC TERMINAL LUGS .312 [7.9] .312 [7.9] .130 [3.3] DIA. L .390 .130 [3.3] .562 DIA. [9.9] [14.3] .075 [1.91] .062 [1.57] MATERIAL: .020 (.51) Brass, Tin Plate .156 [4.0] CAT. NO. L 4000 .500 (12.7) 4001 .562 (14.3) MATERIAL: .016 (.40) Brass, Tin Plate 4002 .750 (19.1) 4003 1.000 (25.4) CAT. NO. 680 LOCKWASHER TERMINAL LUGS .312 [7.9] .312 [7.9] .312 [7.9] .312 [7.9] H H H .343 .875 H .718 .625 .625 .375 [8.7] [22.2] .734 .093 [2.36] [18.3] [15.9] .500 [15.9] [9.5] [18.7] DIA. (2) PLS [12.7] .093 [2.36] .093 [2.36] .093 [2.36] DIA. DIA. DIA. .093 [2.36] .093 [2.36] .125 [3.2] .171 [4.4] RADIUS RADIUS .156 [4.0] MATERIAL: .018 (.46) Brass, Tin Plate MATERIAL: .018 (.46) Brass, Tin Plate MATERIAL:.018 (.46) Brass, Tin Plate MATERIAL: .018 (.46) Brass, Tin Plate CAT. NO. H STUD SIZE CAT. NO. H STUD SIZE CAT. NO. H STUD SIZE 903 .120 (3.1) #4 CAT. NO. H STUD SIZE 910 908 .120 (3.1) #4 .120 (3.1) #4 909 .120 (3.1) #4 904 .140 (3.6) #6 918 914 .140 (3.6) #6 .140 (3.6) #6 916 .140 (3.6) #6 905 .171 (4.4) #8 906 .171 (4.4) #8 915 .171 (4.4) #8 913 .196 (5.0) #10 917 .171 (4.4) #8 .312 [7.9] .312 [7.9] .312 [7.9] .180 [4.6] .093 [2.35] H .218 .265 I. DIA. .464 .250 .296 [5.6] .729 .640 [6.8] .812 [11.8] [6.4] H [7.5] .078 [1.98] H [18.6] [16.3] .093 [2.36] [20.6] DIA. .093 [2.36] DIA. (2) PLS .093 [2.36] DIA. .078 [1.98] DIA. RADIUS .093 [2.36] .156 [4.0] .234 [6.0] RADIUS .158 [4.1] .086 [2.17] .234 [6.0] RADIUS MATERIAL: .018 (.46) Brass, Tin Plate MATERIAL: .018 (.46) Brass, Tin Plate MATERIAL: .018 (.46) Brass, Tin Plate CAT. NO. H STUD SIZE CAT. NO. H STUD SIZE CAT. NO. H STUD SIZE 7317 .120 (3.1) #4 7311 .120 (3.1) #4 7314 .120 (3.1) #4 7318 .140 (3.6) #6 MATERIAL: .013 (.33) Brass, Tin Plate 7312 .140 (3.6) #6 7315 .140 (3.6) #6 7319 .171 (4.4) #8 7313 .171 (4.4) #8 7316 .171 (4.4) #8 CAT. NO. 907 4704 .196 (5.0) #10 SOLDER TERMINAL LUGS .312 [7.9] .250 [6.4] .265 [6.8] .281 [7.2] .136 [3.0] .515 .312 .531 H H .312 .687 H [13.1] .093 [2.36] .875 .437 [7.9] .625 [13.5] [7.9] .076 [1.93] [22.3] [17.5] [11.1] DIA. [15.9] .078 [1.98] DIA. DIA. .080 [2.03] .093 [2.36] .080 [2.03] RADIUS DIA. RADIUS .140 [3.6] .171 [4.4] MATERIAL: .020 (.51) Brass, Tin Plate MATERIAL: .015 (.38) Brass, Tin Plate MATERIAL: .020 (.51) Brass, Tin Plate CAT. NO. H STUD SIZE CAT. NO. H STUD SIZE CAT. NO. H STUD SIZE 7325 .120 (3.1) #4 7328 .120 (3.1) #4 7331 .120 (3.1) #4 7326 .140 (3.6) #6 MATERIAL: .016 (.41) Brass, Tin Plate 7329 .140 (3.6) #6 7332 .140 (3.6) #6 7327 .171 (4.4) #8 7330 .171 (4.4) #8 7333 .171 (4.4) #8 7340 .196 (5.0) #10 CAT. NO. 4004 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 58 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED TERMINAL LUGS PC TEST POINT TERMINALS PC TEST POINTS - SLOTTED & LOOP TYPES • Low profile, space saving designs for dense packaging • Wide variety of configurations to suit most applications • Safe, practical, economical replacement for wire-wrap posts • Easy mount design, ideal for wave soldering • Re-fit PC boards without need for re-design • Provides easy access for production testing and field service troubleshooting • Positive grip when using J hooks, EZ hooks, grabbers, clips, tips and probes • Custom test point terminals can be manufactured to your specifications • Other platings and materials available upon request MATERIAL: Brass, Tin Plate .078 [1.98] .093 [2.4] .075 [1.90] .032 [.81] .039 [.99] .098 [2.5] .094 [2.4] .196 [5.0] .032 [.81] DIA. (2) PLS. .035 [.89] .114 .047 .035 [.90] [2.9] .050 [1.27] [1.19] .097 [2.5] DIA. .355 [9.0] .047 [1.19] .312 .275 X .078 [1.98] .071 [1.80] [7.9] [7.0] .070 [1.78] L .157 [4.0] .060 [1.52] .047 [1.19] DIA. .035 [.89] .047 [1.19] .121 [3.1] .115 [2.9] .126 .039 [3.2] [1.00] MATERIAL: .025 (.64) Brass .039 [1.00] .044 CAT. NO. L [1.12] MATERIAL: .016 (.41) Brass MATERIAL: .025 (.64) Brass MATERIAL: .020 (.51) Brass MATERIAL: .025 (.64) Brass 1030 .120 (3.0) 1031 .156 (4.0) CAT. NO. 1037 CAT. NO. 1036 CAT. NO. 4953 CAT. NO. 4950 .105 [2.7] .100 [2.5] .100 [2.5] .100 [2.5] .110 [2.8] .047 [1.19] .055 [1.40] X .087 [2.20] .039 [1.00] .047 [1.19] .047 [1.19] .130 .218 [5.5] .050 [1.27] .218 [5.5] .040 [1.02] [3.30] .177 .078 [1.98] .169 .125 [3.2] [4.5] [4.3] .118 [3.0] .275 [7.0] .114 [2.9] .110 [2.8] .117 [3.0] .125 [3.18] .055 .047 [1.19] [1.40] .060 [1.52] DIA. .115 [2.9] .043 [1.09] .039 [1.00] .039 [1.00] .039 [1.00] .062 [1.57] .200 .400 [5.1] [10.2] MATERIAL: .024 (.64) Brass MATERIAL: .020 (.51) Brass MATERIAL: .025 (.64) Brass MATERIAL: .025 (.64) Brass MATERIAL: .025 (.64) Brass CAT. NO. 1032 CAT. NO. 1035 CAT. NO. 1034 CAT. NO. 1045 CAT. NO. 1040 .110 [2.8] .110 [2.8] .118 [3.0] .060 [1.52] X .110 [2.8] W .100 [2.5] .050 [1.30] x .118 [3.0] .098 [2.50] .239 [6.1] .355 [9.0] .039 [1.00] .417 [10.6] H .250 [6.4] .110 [2.8] .067 [1.70] .275 [7.0] L .156 [4.0] .156 [4.0] .195 [5.0] .060 [1.52] .047 [1.20] x .070 [1.78] .150 [3.8] .098 [2.5] .138 [3.5] DIA (2) PLS. .047 [1.19] .060 [1.52] .063 [1.60] .069 [1.75] .055 [1.40] MATERIAL: .032 (.81) Brass MATERIAL: .025 (.64) Brass .197 [5.0] CAT. NO. L CAT. NO. WH MATERIAL: .020 (.51) Brass MATERIAL: .020 (.51) Brass MATERIAL: .025 (.64) Brass 1041 .275 (7.0) 1249 .047 (1.20) .087 (2.21) 1046 .150 (3.8) CAT. NO. 1250 CAT. NO. 1038 CAT. NO. 4951 4952 .063 (1.60) .098 (2.50) .138 [3.5] CUSTOM .312 [7.9] .051 [1.30] .236 [6.0] .125 [3.2] TERMINALS .118 [3.0] .234 DIA. [5.9] .047 [1.19] .390 Custom terminals can be .156 [4.0] X .093 [2.36] .130 [3.3] [9.9] .118 [3.0] .562 .531 machined to your exact .171 DIA. [14.3] [13.5] [4.3] specifications. Standard .256 .160 [4.1] [6.5] .125 [3.2] .064 and special terminals can [1.63] DIA be staked onto special .047 [1.19] .156 [4.0] .054 .055 [1.40] boards. Please email/fax [1.37] .062 [1.57] your design to our MATERIAL: .025 (.64) Brass MATERIAL: .025 (.64) Brass MATERIAL: .020 (.51) Brass MATERIAL: .015 (.38) Brass Engineering Department. CAT. NO. 1033 CAT. NO. 1039 CAT. NO. 4954 CAT. NO. 680 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 59 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED (THM) THRU HOLE MOUNT TEST POINTS - COLOR KEYED • Color keyed for visibility and quick identification • Economical choice for PC test point terminations • Snap-fit mounting provides positive retention for wave soldering • Wire form loop for safe, non-slip testing • Space saving, ultra low and low profile designs • High profile design for difficult to reach applications • Suitable for high density packaging on .062 (1.57) and .093 (2.36) PC boards • Practical replacement for wire-wrap posts and turrets • Secure grip for J hooks, EZ hooks, grabbers, alligator clips, tips or probes • High tempurature nylon base ideal for reflow soldering • Ideal for reliable production testing and field service troubleshooting COLOR KEYED MINIATURE COMPACT MULTIPURPOSE .125 [3.2] DIA. .125 [3.2] DIA. .100 [2.5] DIA. .070 [1.80] I.D. .070 [1.80] I.D. .050 [1.25] I.D. .220 .180 .120 .320 [4.6] .120 [5.6] .300 .350 [3.0] [8.1] [3.0] [7.6] .445 [8.9] .120 [11.3] [3.0] SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS Terminal: Terminal: Terminal: .010 (.25)  .020 (.51) Phosphor Bronze, .015 (.38)  .032 (.81)Phosphor Bronze, .015 (.38) 
.032 (.81) Phosphor Bronze, Silver Plate Silver Plate Silver Plate Base: Nylon 46, UL Rated 94V-0 Base: Nylon 46, UL Rated 94V-0 Base: Nylon 46, UL Rated 94V-0 Mtg. Hole: .040 (1.0) Diameter Mtg. Hole: .063 (1.6) Diameter Mtg. Hole: .063 (1.6) Diameter CAT. BASE CAT. BASE CAT. BASE CAT. BASE CAT. BASE CAT. BASE NO. COLOR NO. COLOR NO. COLOR NO. COLOR NO. COLOR NO. COLOR 5000 RED 5115 BROWN 5005 RED 5120 BROWN 5010 RED 5125 BROWN 5001 BLACK 5116 GREEN 5006 BLACK 5121 GREEN 5011 BLACK 5126 GREEN 5002 WHITE 5117 BLUE 5007 WHITE 5122 BLUE 5012 WHITE 5127 BLUE 5003 ORANGE 5118 GREY 5008 ORANGE 5123 GREY 5013 ORANGE 5128 GREY 5004 YELLOW 5119 PURPLE 5009 YELLOW 5124 PURPLE 5014 YELLOW 5129 PURPLE ULTRA LOW PROFILE LOW PROFILE .100 [2.5] DIA. .094 [2.4] DIA. .100 [2.5] SHOWN AS REF. INSTALLED INTO .200 [5.1] .040 [1.02] DIA. SHOWN AS REF. .350 MOUNTING HOLE INSTALLED INTO .200 [5.1] MATERIAL: .017 (.43) Dia. [8.9] .040 [1.02] DIA. MATERIAL: .016 (.40)  .028 MOUNTING HOLE Phospher Bronze Silver plate (.71) Phospher Bronze Silver plate Mtg Hole: .040 (1.0) Mtg Hole: .040 (1.0) CAT. NO. 5021 CAT. NO. 5020 STANDARD LARGE .150 [3.8] .100 [2.5] SHOWN AS .250 [6.4] SHOWN AS .200 [5.1] INSTALLED INTO REF. INSTALLED INTO REF. .400 .112 [2.84] TO .078 [1.98] DIA. .350 .067 [1.70] TO .078 [1.98] DIA. [10.2] MOUNTING HOLE [8.9] MOUNTING HOLE MATERIAL: .020 (.50) Dia. MATERIAL: .020 (.50) Dia. Phospher Bronze Silver plate Phospher Bronze Silver plate Mtg Hole: .073 (1.85) Mtg Hole: .114 (2.9) CAT. NO. 5023 CAT. NO. 5024 JUMPERS .100 SPACING .200 SPACING Mounting Detail Mounting Detail SHOWN AS .100 [2.5] .200 [5.1] .300 [7.6] INSTALLED INTO .200 [5.1] REF. SHOWN AS TWO .040 [1.02] DIA .040 [1.0] (2) PLS. .040 [1.0] (2) PLS. REF. INSTALLED INTO MOUNTING HOLE TWO .040 [1.02] DIA. MOUNTING HOLE MATERIAL: .020 (.50) Dia. MATERIAL: .016 (.40)  .028 (.71) Phospher Bronze Silver plate Phospher Bronze Silver plate .100 [2.54] .200 Mtg Hole: .040 (1.0) Mtg Hole: .040 (1.0) [5.08] CAT. NO. 5025 CAT. NO. 5026 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 60 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED THM TEST POINTS SMT TEST POINTS (SMT) SURFACE MOUNT TEST POINTS ON TAPE & REEL MICRO MINIATURE • Manufactured using flat wire to provide a large mounting surface area SUPPLIED ON TAPE AND REEL • Ideal for use with miniature probes, clips, and hooks • Efficient, safe, board level testing Pad Layout • Ultra low profile, ideally suited for advanced surface mount .135 printed circuit board applications .105 [2.7] [3.4] • Designed for long life and durability .070 .040 [1.00] [1.80] SPECIFICATIONS Contact Material: .010 (.25) Phosphor Bronze .040 [1.00] Contact Finish: Silver Plate .060 Tape Material: 8mm wide; 4mm pitch; [1.50] conductive polycarbonate carrier tape meets ANSI/EIA-481 standard CAT. NO. 5015 - 1000 pieces per reel CAT. NO. 5017 - 5000 pieces per reel MINIATURE • Ideal for use with most standard probes, clips and hooksS • Efficient, safe, board level testing SUPPLIED ON TAPE AND REEL • Unique design provides exceptional strength and durability • Simplifies testing on dense SMT circuit boards .080 .040 [1.02] SPECIFICATIONS Pad Layout [2.03] Contact Material: .150 [3.80] .015 (.38) Phosphor Bronze MIN. Contact Finish: Silver Plate .080 [2.03] Tape Material: 12mm wide; 4mm pitch; .090 MIN. [2.29] conductive polycarbonate carrier tape meets ANSI/EIA-481 standard .150 [3.81] CAT. NO. 5019 - 1000 pieces per reel CAT. NO. 5029 - 5000 pieces per reel COMPACT • Ideal for use with standard probes, clips and hooks • Efficient, safe, board level testing SUPPLIED ON TAPE AND REEL • Unique design provides exceptional strength and durability • Simplifies testing on dense SMT circuit boards Pad Layout .112 [2.8] .185 [4.7] SPECIFICATIONS Contact Material: .150 [3.8] .040 [1.00] .015 (.38) Phosphor Bronze .135 Contact Finish: Silver Plate [3.4] Tape Material: 12mm wide; 4mm pitch; .090 [2.30] conductive polycarbonate carrier tape meets ANSI/EIA-481 standard CAT. NO. 5016 - 1000 pieces per reel CAT. NO. 5018 - 5000 pieces per reel ALLIGATOR CLIPS SMALL CLIP MEDIUM CLIP LARGE CLIP • Solder Connection with Strain Relief • Solder Connection with Strain Relief • Solder Connection or Screw Connection • Insulated or Non-Insulated • Insulated or Non-Insulated (Barrel Accepts Wire or Standard Banana Plugs) • Insulated or Non-Insulated .750 (19.1) .445 (11.3) .335 (8.5) .295 (7.5) 5048 only 1.06 (27.0) 1.97 (50.0) 1.40 (35.5) CAT. INSULATOR NO. COLOR CAT. INSULATOR CAT. INSULATOR NO. COLOR 5033 NONE JAW SPREAD JAW SPREAD JAW SPREAD NO. COLOR 5044 NONE .236 (6.0) max. 5034 RED .236 (6.0) max. .315 (8.0) max. 5045 RED 5038 NONE 5035 BLACK MATERIAL: MATERIAL: MATERIAL: 5039 RED 5046 BLACK 5036 GREEN Clip: Steel, Nickel Plate Clip: Steel, Nickel Plate Clip: Steel, Nickel Plate 5040 BLACK 5037 YELLOW 5048 SCREW INSTALLED Insulator: Vinyl Insulator: Vinyl Insulator: Vinyl ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 61 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PC SCREW TERMINALS These easy-to-mount, multipurpose screw type terminals are a practical, CAT. NO. COLOR SUFFIX low-cost alternative to PC screw type edge connectors, barrier blocks, terminal Ex: XXXX -X boards and terminal strips. Steadfast and easy to install, will accommodate solid or stranded wire, crimp type terminals or lugs. Multi-placement of these low-profile terminals make them ideally suited for high density packaging. Supplied unassembled or with screw installed and captivated. COLOR SELECTION: Select desired screw terminal PRINCIPAL FEATURES and add color suffix to the • Low profile screw terminal Cat. No. • Stable, no-rock design with exclusive anti-rotational feature • Easily mounts with four legs into pre-drilled or punched holes HEAD COLOR SUFFIX • Accepts 14-22 AWG solid or stranded wire, crimp type terminals or lugs RED -2 • Ideally suited for high-density packaging • Available in horizontal or vertical mounting BLACK -3 • Space-saving and time saving WHITE -4 • Easy accessibility for PC board testing BLUE -5 • Binding screw is positioned above board level to avoid wicking during GREEN -6 wave soldering 7700 YELLOW -7 • Terminals are made of Brass with Tin Plate 7693-5 NICKEL none • Supplied with a combination drive 6-32 binding head screw HORIZONTAL TYPE 6-32 x .250 [6.3] L. 6-32 x .250 [6.3] L. SPECIFICATIONS SCREW SCREW Rated: 15 Amps Terminal: .327 .327 .452 [11.5] [8.3] .452 [11.5] .032 (.81) Brass, Matte Tin Plate [8.3] Binding Head Screw: .280 .312 .280 .312 Brass, Nickel Plate 7692-2 [7.1] [7.9] 7700-3 .512 [7.1] [7.9] .512 [13.0] [13.0] SNAP-IN PC MOUNT PC MOUNT Mounting Detail .060 [1.52] .295 • Color coded screws • Color coded screws .060 [1.52] .295 (4) PLS .138 [7.5] (4) PLS available (add color [7.5] available (add color .138 [3.5] .295 [7.5] .197 [5.0] [3.5] screw suffix to Cat. No.) .197 [5.0] screw suffix to Cat. No.) .197 [5.0] CAT. NO. 7779 (No Screw Supplied) CAT. NO. 7781 (No Screw Supplied) .073 [1.85] DIA. (4) PLS CAT. NO. 7690 (Screw Supplied Unassembled) CAT. NO. 8190 (Screw Supplied Unassembled) Color coded screws available CAT. NO. 7692 (Screw Installed & Captivated) CAT. NO. 7700 (Screw Installed & Captivated) (add color screw suffix to Cat. No.) MINI 45° SPECIFICATIONS Rated: 15 Amps Terminal: 6-32 x .250 [6.3] L. .032 (.81) Brass, Matte Tin Plate 4-40 X .250 [6.3] L. SCREW SCREW Binding Head Screw: Brass, Nickel Plate .450 [11.5] .250 45° [6.4] REF. 7773 .350 [8.9] 7702-7 .125 [3.2] .180 [4.6] REF. .412 PC MOUNT SNAP-IN [10.5] .555 • Color coded screws [14.1] PC MOUNT .180 [4.6] available (add color .050 [1.3] screw suffix to Cat. No.) .037 [1.0] (4) PLS .060 [1.52] .295 .214 [5.4] .200 (4) PLS [7.5] .130 [3.3] [5.1] .200 [5.1] Mounting Detail .190 [4.9] Mounting Detail .214 .200 [5.1] [5.4] .295 [7.5] .200 [5.1] CAT. NO. 7783 (No Screw Supplied) CAT. NO. 7774 (No Screw Supplied) CAT. NO. 8189 (Screw Supplied Unassembled) .062 [1.57] DIA. .073 [1.85] DIA. (4) PLS (4) PLS CAT. NO. 7773 (Screw Supplied Unassembled) CAT. NO. 7702 (Screw Installed & Captivated) VERTICAL TYPE 6-32 x .250 [6.3] L. 6-32 x .250 [6.3] L. SCREW SCREW .310 [7.9] .310 [7.9] SPECIFICATIONS Rated: 15 Amps .310 [7.9] .310 [7.9] Terminal: .032 (.81) Brass, Matte Tin Plate .210 [5.4] .210 [5.4] Binding Head Screw: .440 .440 7693-4 [11.2] [11.2] Brass, Nickel Plate 7701 .197 [5.0] .187 [4.8] SNAP-IN PC MOUNT Mounting Detail PC MOUNT .276 [7.0] .276 [7.0] .060 [1.52] .060 [1.52] • Color coded screws • Color coded screws .197 [5.0] (4) PLS (4) PLS .197 [5.0] .197 [5.0] available (add color available (add color screw suffix to Cat. No.) screw suffix to Cat. No.) .276 [7.0] .073 [1.85] DIA. (4) PLS CAT. NO. 7782 (No Screw Supplied) CAT. NO. 7780 (No Screw Supplied) CAT. NO. 7691 (Screw Supplied Unassembled) CAT. NO. 8191 (Screw Supplied Unassembled) Color coded screws available (add color screw suffix to Cat. No.) CAT. NO. 7693 (Screw Installed & Captivated) CAT. NO. 7701 (Screw Installed & Captivated) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 62 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SCREW TERMINALS SCREW TERMINALS PC SCREW TERMINALS LOW PROFILE VERTICAL TYPE SPECIFICATIONS 6-32 X .250 [6.3] L. SCREW Rated: 15 Amps .310 [7.9] .343 [8.7] Terminal: .032 (.81) Brass, Matte Tin 6-32 x .250 [6.3] L. SCREW Plate .310 [7.9] .250 [6.3] Binding Head Screw: Brass, Nickel Plate 7775-2 7778-7 .250 [6.4] .134 [3.4] • Color coded screws • Color coded screws available (add color available (add color screw suffix to screw suffix to Cat. No.) .187 [4.7] .197 [5.0] .276 Cat. No.) .055 [1.4] [7.0] .059 [1.5] (2) PLS Mounting Detail .312 (4) PLS [7.9] .197 [5.0] .187 [4.7] Mounting Detail .144 [3.7] .312 [7.9] CAT. NO. 7784 (No Screw Supplied) CAT. NO. 7785 (No Screw Supplied) .276 DIA. [7.0] CAT. NO. 8198 (Screw Supplied Unassembled) CAT. NO. 8195 (Screw Supplied Unassembled) .067 [1.7] DIA. (2) PLS CAT. NO. 7778 (Screw Installed & Captivated) CAT. NO. 7775 (Screw Installed & Captivated) .062 [1.57] DIA. (4) PLS VERTICAL TYPE EXTENDED HEAVY DUTY SPECIFICATIONS Rated: 15 Amps .310 [7.9] Terminal: .032 (.81) Brass, Mattte Tin Plate .375 [9.5] Binding Head Screw: Brass, Nickel Plate 6-32 x .250 [6.3] L. SCREW .310 [7.9] 10-32 X .375 [9.5] L. SCREW .382 [9.7] .718 8174 [18.3] .947 7699-6 [24.1] .383 [9.7] PC MOUNT • Color coded screws .209 [5.3] Mounting Detail .197 [5.0] available (add color Mounting Detail .197 .060 screw suffix to Cat. No.) .276 [5.0] .197 [5.0] [1.5] .341 [8.7] [7.0] .197 .060 [1.52] (4) PLS [5.0] .197 [5.0] .341 [8.7] CAT. NO. 7789 (No Screw Supplied) .276 [7.0] CAT. NO. 7697 (Screw Supplied Unassembled) CAT. NO. 7791 (No Screw Supplied) .073 [1.85] DIA. .073 [1.85] DIA. CAT. NO. 7699 (Screw Installed & Captivated) (4) PLS CAT. NO. 8174 (Screw Supplied Unassembled) (4) PLS 30 AMP - VERTICAL PRINCIPAL FEATURES HEAVY DUTY • Compact, heavy duty design .060 [1.5] (6) PLS • Six snap-in legs for total stability .060 [1.5] (6) PLS • Serrated top surface secures connection 6-32 x .250 [6.3] L. .310 [7.9] SCREW .470 [11.9] 10-32 x .375 [9.5] L. SCREW .507 [12.9] 8199-6 8196 .250 [6.3] .470 [11.9] • Combination drive, binding head screw • Color coded screws .210 [5.3] .453 [11.5] available (add color .276 .197 screw suffix to Cat. No.) 7.0 Mounting Detail [5.0] .226 [5.7] .394 SPECIFICATIONS SPECIFICATIONS [10.0] .410 Mounting Detail .425 .205 Rated: 30 Amps [10.4] [5.2] Rated: 30 Amps [10.8] .394 .410 [10.4] Terminal: Terminal: .032 (.81) Brass, Matte Tin Plate [10.0] .045 (1.14) Brass, Matte Tin Plate Binding Head Screw: Brass, Nickel Plate .425 .205 .276 Screw: Stainless Steel 10.8 .197 [5.2] CAT. NO. 7786 (No Screw Supplied) [7.0] [5.0] CAT. NO. 7787 (No Screw Supplied) CAT. NO. 8197 (Screw Supplied Unassembled) .101 [2.6] DIA. (6) PLS .076 [1.93] DIA. (6) PLS CAT. NO. 8196 (Screw Supplied Unassembled) CAT. NO. 8199 (Screw Installed & Captivated) COLOR CODED SCREW TERMINAL SELECTION GUIDE Color Coded Screw Terminals COLOR SELECTION: CAT. NO. COLOR SUFFIX provide: Select desired screw terminal Ex: XXXX -X • Quick identification and add color suffix to the • Visibility for field service screw terminal Cat. No. troubleshooting HEAD COLOR SUFFIX SPECIFICATIONS RED -2 Combination Binding Head: BLACK -3 8199-2 Standard screw is Brass, 7692-7 7699-6 WHITE -4 Nickel Plate. For painted, BLUE -5 6-32 x color head, add suffix as GREEN -6 .250 [6.3] L. shown. THREAD YELLOW -7 7775-4 7693-5 7701 7700-3 NICKEL none • Available for screw terminals where noted. Refer to page 133 for color screws only ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 63 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SEMS SCREW TERMINALS 15 AMP SPECIFICATIONS Terminal: .032 (.81) Brass, Matte Tin Plate 6-32 SEMS SCREW 6-32 SEMS Screw & Washer: Steel, Nickel Plate SCREW .440 [11.2] .440 [11.2] .187 [4.8] .197 [5.0] .276 .276 .060 [1.52] .060 [1.52] SNAP-IN PC MOUNT (4) PLS (4) PLS [7.0] [7.0] .197 .197 [5.0] PC MOUNT [5.0] CAT. NO. 7691-SEMS (Screw Supplied Unassembled) CAT. NO. 8191-SEMS (Screw Supplied Unassembled) CAT. NO. 7693-SEMS (Screw Installed & Captivated) CAT. NO. 7701-SEMS (Screw Installed & Captivated) SPECIFICATIONS Terminal: .032 (.81) Brass, Matte Tin Plate 6-32 SEMS .452 [11.5] 6-32 SEMS .452 [11.5] Screw & Washer: Steel, Nickel Plate SCREW SCREW .312 .280 .312 [7.9] .512 [7.1] [7.9] .512 [13.0] [13.0] .308 .060 [1.52] .060 [1.52] (4) PLS .295 .138 [3.5] [7.8] SNAP-IN PC MOUNT [7.5] .197 [5.0] PC MOUNT .197 [5.00] CAT. NO. 7690-SEMS (Screw Supplied Unassembled) CAT. NO. 8190-SEMS (Screw Supplied Unassembled) CAT. NO. 7692-SEMS (Screw Installed & Captivated) CAT. NO. 7700-SEMS (Screw Installed & Captivated) SPECIFICATIONS Terminal: .032 (.81) Brass, Matte Tin Plate Screw & Washer: Steel, Nickel Plate 6-32 SEMS 6-32 SEMS SCREW SCREW .250 .134 [3.4] [6.4] .437 .331 [8.4] [11.1] .276 .059 [1.50] .312 SNAP-IN [7.01] PC MOUNT (4) PLS [7.9] .055 [1.40] .232 PC MOUNT (2) PLS [5.9] CAT. NO. 8195-SEMS (Screw Supplied Unassembled) CAT. NO. 8198-SEMS (Screw Supplied Unassembled) CAT. NO. 7775-SEMS (Screw Installed & Captivated) CAT. NO. 7778-SEMS (Screw Installed & Captivated) SPECIFICATIONS Terminal: .032 (.81) Brass, Matte Tin Plate 6-32 SEMS Screw & Washer: Steel, Nickel Plate SCREW .450 [11.43] 45° 6-32 SEMS REF. SCREW .718 [18.3] .947 .412 [24.1] [10.5] .555 [14.1] PC MOUNT .197 [5.0] PC MOUNT .295 .060 [1.52] .276 [7.49] .200 [5.1] (4) PLS [7.01] .060 [1.52] (4) PLS .197 CAT. NO. 7697-SEMS (Screw Supplied Unassembled) CAT. NO. 8189-SEMS (Screw Supplied Unassembled) [5.0] CAT. NO. 7699-SEMS (Screw Installed & Captivated) CAT. NO. 7702-SEMS (Screw Installed & Captivated) 30 AMP SEMS Screw Terminals provide quick and secure attachment of wire leads. SEMS screw has captivated, free spining lock washer, eliminated twisting of wire when tightening lead to terminal. Washer will rise with head of screw when unscrewed. .507 [12.9] 6-32 SEMS SCREW .266 [6.8] .310 [7.9] DIA. SQUARE .460 [11.7] SNAP-IN PC MOUNT .276 [7.0] .060 [1.52] SPECIFICATIONS .197 [5.0] (6) PLS Terminal: .032 (.81) Brass, Matte Tin Plate .250 [6.4] .394 [10.0] Screw & Washer: Steel, Nickel Plate 6-32 THREAD CAT. NO. 8197-SEMS (Screw Supplied Unassembled) SPECIFICATIONS Screw & Washer: Steel, Nickel Plate CAT. NO. 8199-SEMS (Screw Installed & Captivated) CAT. NO. 9920 (SEMS Screw Only) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 64 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SEMS SCREW TERMINALS METRIC SCREW TERMINALS METRIC PC SCREW TERMINALS These easy-to-mount, multipurpose screw type terminals are a practical, date solid or stranded wire, crimp type terminals or lugs. Multi- placement low-cost alternative to PC screw type edge connectors, barrier blocks, termi- of these low-profile terminals make them ideally suited for high density nal boards and terminal strips. Steadfast and easy to install, will accommo- packaging. Supplied unassembled or with screw installed and captivated. PRINCIPAL FEATURES HEAD COLOR SUFFIX • Stable, no-rock design with exclusive anti-rotational feature RED -2 • Easily mounts with four legs into pre-drilled or punched holes BLACK -3 • Accepts 14-22 AWG solid or stranded wire, crimp type WHITE -4 terminals or lugs BLUE -5 COLOR SELECTION: • Ideally suited for high-density packaging GREEN -6 Select desired screw terminal • Easy accessibility for PC board testing YELLOW -7 and add color suffix to the • Binding screw is positioned above board level to avoid NICKEL none screw terminal Cat. No. wicking during wave soldering Refer to page 133 for color screws only HORIZONTAL TYPE SPECIFICATIONS Rated: 15 Amps 6.00 LONG 6.00 LONG Terminal: .80 Brass, Matte Tin Plate 11.50 11.50 SCREW SCREW 7693-5 Screw: Brass, Nickel Plate 7.11 7.11 7.90 7.90 SNAP-IN 5.10 5.10 PC MOUNT PC MOUNT 1.52 1.52 Mounting Detail 7.81 6.60 5.00 5.08 5.08 5.00 7.50 M3 THREAD M4 THREAD M3 THREAD M4 THREAD 5.00 CAT. NO. CAT. NO. CAT. NO. CAT. NO. 7790 No Screw Supplied 7792 7760 No Screw Supplied 7764 1.85 DIA. HOLE (4) PLS 7689* Screw Supplied Unassembled 7793 7761* Screw Supplied Unassembled 7765 7695* Screw Installed & Captivated 7794 Color coded screws available 7762* Screw Installed & Captivated 7766 (add color screw suffix to Cat. No.) *Available with color Coded Screws *Available with color Coded Screws VERTICAL TYPE 8.00 8.00 6.00 LONG 6.00 LONG SCREW SPECIFICATIONS SCREW 8.00 8.00 Rated: 15 Amps Terminal: .80 Brass, Matte Tin Plate 6.45 6.45 Screw: Brass, Nickel Plate 5.00 4.75 1.52 SNAP-IN 1.52 7.00 5.00 PC MOUNT 5.00 PC MOUNT 7.00 Mounting Detail 7.00 5.00 M3 THREAD M4 THREAD M3 THREAD M4 THREAD CAT. NO. CAT. NO. CAT. NO. CAT. NO. 1.85 DIA. HOLE 7788 No Screw Supplied 7795 7770 No Screw Supplied 7767 (4) PLS 7698* Screw Supplied Unassembled 7796 7771* Screw Supplied Unassembled 7768 7696* Screw Installed & Captivated 7797 Color coded screws available 7772* Screw Installed & Captivated 7769 *Available with color Coded Screws (add color screw suffix to Cat. No.) *Available with color Coded Screws 30 AMP - VERTICAL TYPE M4 M5 M4 x 6.00 L. SCREW 11.94 PRINCIPAL FEATURES 7.87 • Compact, heavy duty design M5 x 10.00 L. • Six snap-in legs for total stability SCREW • Serrated top surface secures connection 11.94 12.88 SNAP-IN SNAP-IN PC MOUNT 6.35 11.51 PC MOUNT 17.02 11.68 7.00 1.52 1.52 SPECIFICATIONS SPECIFICATIONS Mounting Detail 10.80 10.41 10.00 Mounting Detail Rated: 30 Amps Rated: 30 Amps 10.41 Terminal: 1.14 Brass, Matte Tin Plate Terminal: .80 Brass, Matte Tin Plate 5.21 10.00 Screw: Brass, Nickel Plate Screw: Brass, Nickel Plate 5.00 10.80 CAT. NO. 7.00 Color coded 7798 No Screw Supplied CAT. NO. screws available 7799 Screw Supplied Unassembled 2.57 DIA. HOLE 7807 No Screw Supplied (add color screw 1.93 DIA. HOLE (6) PLS (6) PLS 7800 Screw Installed & Captivated suffix to Cat. No.) 7808 Screw Supplied Unassembled ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 65 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED MINI BINDING POSTS THRU HOLE WIRE CONTACT .157 [4.0] M2.5 X 4.0 L. SQUARE M2.5 x .156 [4.0] L. .158 [4.0] SCREW SCREW SQUARE .105 [2.7] DIA. .192 [4.9] THRU. .102 [2.6] .187 [4.8] CONTACT .197 [5.0] .197 [5.0] .110 [2.8] DIA. .039 [1.0] HOLE THRU .039 [1.00] SPECIFICATIONS SPECIFICATIONS DIA. Terminal: Brass, Tin Plate Terminal: Brass, Tin Plate Screw: Steel, Zinc Plate Screw: Steel, Zinc Plate Mounting Hole: .047 (1.2) Contact: Phoshorus Bronze, Tin Plate Current Rating: 15 AMP Mounting Hole: .047 (1.2) Current Rating: 15 AMP CAT. NO. 8730 (Screw Installed) CAT. NO. 8737 (Screw Installed) LOW PROFILE SCREW TERMINALS These sturdy, low cost screw terminals, feature an anti-rotation tab for use with spade terminals. They are available with the screw installed and captivated, the screw unassembled or without a screw. PRINCIPLE FEATURES • Easy to connect using solid or stranded wire, crimp lugs or terminals • Anti-rotation tab for use with spade terminals .375 [9.5] DIA. • Supplied with screw installed and captivated, 45° with screw unassembled, or without screw .094 [2.4] • Stainless steel screw will not wick .109 [2.8] 8-32 6-32 .375 [9.5] DIA. 8-32 x .375 [9.5] L. SCREW .140 6-32 x .250 [6.3] L. [3.6] SCREW .156 [4.0] .062 [1.57] .297 .437 [7.6] .531 [11.1] .187 [4.8] [13.5] .328 .100 [2.6] [8.4] .115 [2.9] .406 [10.3] SPECIFICATIONS SPECIFICATIONS Rated: 15 Amps Rated: 15 Amps Terminal: .032 (.81) Brass, Matte Tin Plate Mounting Detail Terminal: .064 (1.6) Brass, Matte Tin Plate Mounting Detail Screw: Combination drive, Stainless Steel Screw: Brass, Nickel Plate .340 [8.7] .470 [12.0] .110 [2.8] CAT. NO. 1284 (No Screw Supplied) CAT. NO. 1205 (No Screw Supplied) .126 [3.2] CAT. NO. 1298 (Screw Supplied Unassembled) CAT. NO. 1207 (Screw Supplied Unassembled) .210 [5.3] DIA. .187 [4.7] DIA. .077 [1.96] CAT. NO. 1201 (Screw Installed & Captivated) CAT. NO. 1209 (Screw Installed) HEAVY DUTY SCREW TERMINALS - 30 AMP These heavy duty terminals are available with the screw installed or unassembled, and feature easy access to connect solid or stranded wire, crimp type lugs or terminals. PRINCIPLE FEATURES • Anti-rotation tab for use with spade terminals • Below the board notched leg, to facilitate mechanical and solder connections • Easy to connect using solid or stranded wire, crimp lugs or terminals 10-32 • Available with screw installed, unassembled, or without screw 10-32 .437 [11.1] DIA. .375 [9.5] DIA. 45° .375 [9.6] .156 [4.0] .109 [2.8] 10-32 x .375 [9.5] L. .140 SCREW 10-32 x .250 [6.3] L. [3.6] SCREW .250 [6.4] .093 [2.36] .297 .437 [7.6] .531 [11.1] [13.5] .187 [4.8] SPECIFICATIONS .406 [10.3] .125 [3.2] Rated: 30 Amps SPECIFICATIONS Terminal: .064 (1.6) .115 [2.9] .406 [10.3] Rated: 30 Amps Mounting Detail Mounting Detail Brass, Matte Tin Plate Terminal: .062 (1.6) Brass, Matte Tin Plate Screw: Steel, Nickel Plate Screw: Combination drive, Stainless Steel .472 [12.0] .470 [12.0] CAT. NO. 1293 (No Screw Supplied) CAT. NO. 1206 (No Screw Supplied) .126 [3.2] .142 [3.6] CAT. NO. 1208 (Screw Supplied Unassembled) CAT. NO. 1299 (Screw Supplied Unassembled) .210 [5.3] DIA. .210 [5.3] DIA. .075 [1.9] .077 [1.96] CAT. NO. 1283 (Screw Installed) CAT. NO. 1202 (Screw Installed & Captivated) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 66 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SCREW TERMINALS SCREW TERMINALS SCREW TERMINALS OFFSET LEG STRAIGHT LEG .100 .100 [2.6] [2.6] .375 [9.5] .375 [9.5] DIA. DIA. 6-32 x .375 [9.5] L. 6-32 x .375 [9.5] L. SCREW SCREW .093 [2.36] SPECIFICATIONS .156 [4.0] .093 [2.36] .156 [4.0] Mounting Detail Terminal: SPECIFICATIONS .032 (.81) Steel, Tin Plate .330 .062 .203 [5.2] .110 [8.4] .203 [5.2] .062 Terminal: .032 (.81) Steel, Tin Plate Screw: Steel, Nickel [1.57] [2.8] [1.57] Screw: Steel, Nickel Plate .562 [14.3] Plate (Screw Installed .562 [14.3] .280 .093 (Screw Installed & Captivated) .093 & Captivated) [7.1] [2.36] [2.36] .125 [3.2] Rated: 15 Amps Rated: 15 Amps DIA. DIA. .187 [4.8] .210 .125 [3.2] .187 [4.8] .125 [3.2] [5.4] .312 [7.9] CAT. NO. 1248 CAT. NO. 1215 .312 [7.9] SOLDER TAB QUICK FIT .100 [2.54] .187 [4.8] .093 (2) PLS [2.35] .375 [9.5] DIA. DIA. .100 [2.6] 6-32 x .375 [9.5] L. .375 [9.5] SCREW DIA. .156 [3.96] .093 [2.36] 6-32 x .312 [7.9] L. .062 .203 [5.16] .562 [14.3] [1.57] SCREW .563 .156 [4.0] [14.30] .093 [2.36] .312 [7.92] .093 .062 .203 [5.2] .125 [3.18] [2.36] [1.57] .250 [6.35] Mounting Detail Mounting Detail .312 [7.9] .333 [8.5] .330 SPECIFICATIONS .110 [8.38] SPECIFICATIONS [2.8] Terminal: .032 (.81) Steel,Tin Plate Terminal: .032 (.81) Brass, Tin Plate .280 .110 [2.79] [7.11] Screw: Steel, Nickel Plate Screw: Steel, Nickel Plate .270 (Screw Installed & Captivated) (Screw Installed & Captivated) 125 [3.17] .187 [4.7] DIA. [6.90] CAT. NO. 1217 CAT. NO. 1232 Rated: 15 Amps Rated: 15 Amps QUICK-FIT SOLDER QUICK-FIT 6-32 SCREW 6-32 SCREW .375 [9.5] .375 [9.5] .375 [9.5] .375 [9.5] .064 [1.6] 6-32 .100 [2.5] .100 [2.54] (4) PLS. THREAD .070 .562 .562 .108 [2.7] [1.8] [14.3] [14.3] .937 .365 [23.8] [9.3] .308 .178 [4.5] Supplied .308 [7.8] .187 [4.7] [7.8] Unassembled .216 .250 [5.5] [6.4] .308 .308 [7.8] [7.8] Mounting Detail SPECIFICATIONS SPECIFICATIONS .329 Mounting Detail Terminal: .020 (.51) Steel, Tin Plate Terminal: .020 (.51) Steel, Tin Plate SPECIFICATIONS .072 [8.4] [1.83] Screw: Steel, Zinc Plate, Screw: Steel, Zinc Plate, Material: .032 (.81) Brass, NIckel Plate (4) PLS (Screw Installed & Captivated) (Screw Installed & Captivated) Rated: 15 Amps .217 [5.5] .144 .312 [7.9] Rated: 15 Amps Rated: 15 Amps [3.7] SQR. CAT. NO. 1247 (No Screw Supplied) .291 [7.4] CAT. NO. 1272 CAT. NO. 1273 CAT. NO. 1251 (Screw Installed) BINDING POST TERMINALS (RIVET TYPE) SPECIFICATIONS Terminal: Brass, Tin Plate Screw: Steel, Zinc Plate (Screw Supplied Unassembled) 4-40 6-32 8-32 .343 [8.7] .281 [7.2] .312 [7.9] BODY DIA. BODY DIA. BODY DIA. 4-40 x 6-32 x 8-32 x .187 [4.7] L. .187 [4.7] L .187 [4.7] L. SCREW SCREW SCREW .141 .140 [3.6] .171 .187 [4.8] [3.6] .250 [6.4] [4.4] .312 [7.9] .140 [3.6] .172 [4.4] .216 [5.5] .204 [5.2] .220 [5.6] KNURL KNURL .125 [3.2] .250 [6.4] .125 [3.2] KNURL .145 [3.7] Mounting Hole: .220 (5.6) Mounting Hole: .225 (5.7) Mounting Hole: .255 (6.5) FOR .093 (2.38) BOARD FOR .093 (2.38) BOARD FOR .125 (3.2) BOARD CAT. NO. 1537 CAT. NO. 1535 CAT. NO. 1536 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 67 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SPACERS & STANDOFFS Designed for reliability and close tolerance dimensions our diverse selection of spacers and standoffs provide solutions for any design requirements. Available in a wide range of materials and styles, some of the applications include: • Mechanical support • Component-to-board mounting requirements • Board-to-Board PCB mounting • Board-to-Chassis device mounting • Eliminate the cost and bulk of backplanes and card cages • PC/104 & PC/104 plus module mounting • High Temperature conditions • Commercial, Military & Industrial environments Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoHS and REACH directives. We provide 3D modeling, CAD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application. SPACERS & STANDOFFS SECTION CONTENTS ASSORTMENT/MOUNT KITS SPACERS Clear Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Clear Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Threaded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Economy (Rolled) . . . . . . . . . . . . . . . . . . . . . . . . 74 Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Retaining Spacer . . . . . . . . . . . . . . . . . . . . . . . . 75 Nylon support . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Swage / Force Fit . . . . . . . . . . . . . . . . . . . . . . . . 73 PC-104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Stacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MOLDED PC SPACERS THREADED STANDOFFS Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Lock in - Lock in. . . . . . . . . . . . . . . . . . . . . 76-78 Female-Female . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Lock in - Releasable . . . . . . . . . . . . . . . . . 76-78 Hinged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Releasable . . . . . . . . . . . . . . . . . . . . . . . . . 76-78 Male-Female . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Swage / Force Fit . . . . . . . . . . . . . . . . . . . . . . . . 73 69 MALE/FEMALE THREADED STANDOFFS THREAD TL A SIZE EXTERNAL INTERNAL 4-40 .187 (4.7) .250 (6.4) L TL 6-32 .250 (6.4) .375 (9.5) THREAD A 8-32 .375 (9.5) .375 (9.5) .250 [6.4] Application Note: For PC/104 applications use THREAD length .600 (15.3) 4-40 Thread CHOICE OF: Stainless: ASTM A581/A582 Brass: ASTM-B16 Aluminum: ASTM B211 Plating: Nickel (QQ-N-290) Plating: Clear Iridite (Mil-C-5541) 4-40 THREAD 6-32 THREAD 8-32 THREAD STAINLESS STAINLESS STAINLESS L STEEL BRASS ALUMINUM L STEEL BRASS ALUMINUM L STEEL BRASS ALUMINUM LENGTH CAT NO. CAT NO. CAT NO. LENGTH CAT NO. CAT NO. CAT NO. LENGTH CAT NO. CAT NO. CAT NO. .250 (6.4)*** 8712 8713 8714 .250 (6.4)*** 8715 8716 8717 .250 (6.4)*** 8731 8732 8733 .375 (9.5) 2087 7200 8400 .375 (9.5)** 2119 7210 8413 .375 (9.5)** 2149 7220 8426 .500 (12.7) 2088 1944 8401 .500 (12.7) 2120 1952 8414 .500 (12.7) 2150 1957 8427 .600 (15.2)* 5799 8799 6799 .625 (15.9) 2121 1953 8415 .625 (15.9) 2151 1958 8428 .625 (15.9) 2089 1945 8402 .750 (19.1) 2122 1954 8416 .750 (19.1) 2152 1959 8429 .750 (19.1) 2090 1946 8403 .875 (22.2) 2123 7211 8417 .875 (22.2) 2153 7221 8430 .875 (22.2) 2091 7201 8404 1.000 (25.4) 2124 1644 8418 1.000 (25.4) 2154 1960 8431 1.000 (25.4) 2092 1947 8405 1.125 (28.6) 2125 7212 8419 1.125 (28.6) 2155 7222 8432 1.125 (28.6) 2093 7202 8406 1.250 (31.8) 2126 1955 8420 1.250 (31.8) 2156 1961 8433 1.250 (31.8) 2094 1948 8407 1.375 (34.9) 2127 1956 8421 1.375 (34.9) 2157 1962 8434 1.375 (34.9) 2095 1949 8408 1.500 (38.1) 2128 1645 8422 1.500 (38.1) 2158 1963 8435 1.500 (38.1) 2096 1950 8409 1.625 (41.3) 2129 7214 8423 1.625 (41.3) 2159 7224 8436 1.625 (41.3) 2097 7203 8410 1.750 (44.5) 2130 7215 8424 1.750 (44.5) 2160 7225 8437 1.750 (44.5) 2098 7205 8411 2.000 (50.8) 2131 1646 8425 2.000 (50.8) 2161 1964 8438 ** Internal Thread .250 (6.4) Deep 2.000 (50.8) 2099 1951 8412 2.500 (63.5) 2180 1965 8439 *** Internal Thread .130 (3.3)/.150 (3.8) Deep 3.000 (76.2) 2181 1966 8440 *PC/104 Standard Length ***Internal Thread .130 (3.3)/.150 (3.8) Deep ** Internal Thread .250 (6.4) Deep *** Internal Thread .130 (3.3)/.150 (3.8) Deep PC 104 MOUNTING KITS NYLON STANDOFFS • Designed to ease the assembly of new modules and multi-board stacks. MATERIAL: Nylon 6/6 • Each kit includes all the hardware that is required to mount a single-board. MALE/FEMALE STANDOFFS L A THREAD A .375 [9.5] .250 [6.4] 4-40 SCREW THREAD THREAD SIZE .600 [15.2] L 4-40 6-32 8-32 LENGTH CAT. NO. CAT. NO. CAT. NO. PC104 STANDOFF .250 (6.4)*** 4800 4814 4828 .375 (9.5) 4801 4815 4829** .187 [4.7] .500 (12.7) 4802 4816 4830 .600 (15.2)* 4799 - - 4-40 HEX NUT .625 (15.9) 4803 4817 4831 Application Note: .750 (19.1) 4804 4818 4832 For PC/104 applications .875 (22.2) 4805 4819 4833 use CAT. NO. 4799 1.000 (25.4) 4806 4820 4834 1.125 (28.6) 4807 4821 4835 1.250 (31.8) 4808 4822 4836 1.375 (34.9) 4809 4823 4837 Complete Kit Includes Four (4) each: 1.500 (38.1) 4810 4824 4838 CAT. NO. Kit Description Standoff Screw Nut 1.625 (41.3) 4811 4825 4839 4799-4 Nylon 4799 9328 9605 THREAD 1.750 (44.5) 4812 4826 4840 SIZE A 5799-4 Stainless Steel 5799 9901 7248-3 2.000 (50.8) 4813 4827 4841 4-40 .187 (4.7) 6799-4 Aluminum 6799 9301* 9600* * PC/104 Standard Length 6-32 250 (6.4) 8799-4 Brass 8799 9301* 9600* ** Internal Thread .250 (6.4) Deep 8-32 .375 (9.5) *** Internal Thread .130 (3.3)/.150 (3.8) Deep * Aluminum and brass kits supplied with steel hardware. ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 70 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED HEX MALE/FEMALE STANDOFFS THREADED STANDOFFS FEMALE THREADED STANDOFFS HEX ROUND THREAD L THREAD HEX O.D. CHOICE OF: Stainless: ASTM A581/A582 Brass: per ASTM-B16 Aluminum: ASTM B211 Nylon V2: 6/6 UL Rated 94V-2 Phenolic: PBE Grade Natural Plating: Zinc ASTM B633 Plating: Clear Iridite Finish Nylon V0: 6/6 UL Rated 94V-0 Color Phenolic HEX ROUND HEX O.D. NYLON V2 NYLON V0 STAINLESS BRASS ALUMINUM BRASS ALUMINUM PHENOLIC CAT. NO. CAT. NO. CAT. NO. CAT. NO. CAT. NO. LENGTH CAT. NO. CAT. NO. CAT. NO. 2-56 THREAD —— — 1798A 1797A .187 (4.7) 1802A 1801A — .156 —— — 1798B 1797B .250 (6.4) 1802B 1801B — .156 (3.9) —— — 1798C 1797C .312 (7.9) 1802C 1801C — (3.9) —— — 1798D 1797D .375 (9.5) 1802D 1801D — 4-40 THREAD —— — 1450 1891 .250 (6.4) 1547 2025 —— —— — 1803 1892 .375 (9.5) 1864 2026 — —— — 1656 1893 .500 (12.7) 1657 2027 — .187 .187 —— — 1804 1894 .625 (15.9) 1865 2028 — (4.7) (4.7) —— — 1656A 1895 .750 (19.1) 1657A 2029 — —— — 1805 1896 .875 (22.2) 1866 2030 — —— — 1656B 1897 1.000 (25.4) 1657B 2031 — 1902A 8440A 1921 1450A 2201 .250 (6.4) 1547A 3478 376 1902B 8440B 1921A 1450B 2202 .375 (9.5) 1547B 3479 377 1902C 8440C 1921B 1450C 2203 .500 (12.7) 1547C 3480 378 1902F 8440D — 1829 1808 .625 (15.9) 1867 1839 — .250 .250 1902D 8440E 1921C 1450D 2204 .750 (19.1) 1547D 3481 379 (6.3) (6.3) 1902G 8440F — 1830 1809 .875 (22.2) 1876 1846 — 1902E 8440G 1921D 1450E 2205 1.000 (25.4) 1547E 3482 380 —— 1921E 1831 2206 1.500 (38.1) 1877 3483 381 —— 1921F 1832 2207 2.000 (50.8) 1878 3484 382 6-32 THREAD 1903A 8441A 1922 1451A 2208 .250 (6.4) 1548A 3485 383 1903B 8441B 1922A 1451B 2209 .375 (9.5) 1548B 3486 384 1903C 8441C 1922B 1451C 2210 .500 (12.7) 1548C 3487 385 1903F 8441D — 1451D 1813 .625 (15.9) 1548D 1847 — 1903D 8441E 1922C 1451E 2211 .750 (19.1) 1548E 3488 386 1903G 8441F — 1833 1816 .875 (22.2) 1879 1848 — .250 .250 1903E 8441G 1922D 1635 2212 1.000 (25.4) 1548F 3489 387 (6.3) (6.3) —— — 1636 1818 1.250 (31.8) 1881 1853 — —— 1922E 1637 2213 1.500 (38.1) 1882 3490 388 —— — 1638 1819 1.750 (44.5) 1883 1855 — —— 1922F 1639 2214 2.000 (50.8) 1884 3491 389 —— — 1642 1820 2.250 (57.2) 1885 1856 — —— — 1643 1825 2.500 (63.5) 1886 1857 — 8-32 THREAD 1904A 8442A 1923 1474A 2215 .250 (6.4) 1692A 3492 390 1904B 8442B 1923A 1474B 2216 .375 (9.5) 1692B 3493 391 1904C 8442C 1923B 1474C 2217 .500 (12.7) 1692C 3494 392 1904F 8442D — 1834 1827 .625 (15.9) 1887 1858 — .250 .250 1904D 8442E 1923C 1474D 2218 .750 (19.1) 1692D 3495 393 (6.3) (6.3) 1904G 8442F — 1836 1828 .875 (22.2) 1888 1859 — 1904E 8442G 1923D 1474E 2219 1.000 (25.4) 1692E 3496 394 —— 1923E 1837 2220 1.500 (38.1) 1889 3497 395 —— 1923F 1838 2221 2.000 (50.8) 1899 3498 396 10-32 THREAD —— 1475A 1822A 1821A .375 (9.5) 3499A 3500A 468 —— 1475B 1822B 1821B .500 (12.7) 3499B 3500B 469 .312 .312 —— 1475C 1822C 1821C .625 (15.9) 3499C 3500C — (7.9) (7.9) —— 1475D 1822D 1821D .750 (19.1) 3499D 3500D 470 —— 1475F 1822F 1821F 1.000 (25.4) 3499F 3500F 471 NOTE: All standoffs over 1.000 (25.4) are tapped .375 (9.5) min. both ends, except 4-40 standoffs which are tapped .250 (6.4) min. ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 71 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED METRIC STANDOFFS METRIC NYLON STANDOFFS Material: Nylon 6/6, UL Rated 94V-2 MALE/FEMALE FEMALE MALE/FEMALE FEMALE THREAD THREAD SIZE TL A A SIZE M2.5 4.0 5.0 M3 8.0 M3 8.0 8.0 M4 9.5 M4 10.0 11.0 MALE/FEMALE FEMALE CAT. NO. L CAT. NO. 5.0 HEX (M3 THREAD) — 6.0 25508 — 8.0 25509 25501 10.0 25510 HEX HEX THREAD THREAD 25502 12.0 25511 25503 15.0 25512 A 25504 18.0 25513 L 25505 20.0 25514 L HEX 25506 25.0 25515 HEX 6.0 HEX (M4 THREAD) TL THREAD — 6.0 25528 — 8.0 25529 A 25521 10.0 25530 L CHOICE OF: L 25522 12.0 25531 Stainless: ASTM A581/A582 Brass: ASTM-B16 Aluminum: ASTM B211 25523 15.0 25532 Plating: Nickel Plating: Clear Iridite THREAD 25524 18.0 25533 A (QQ-N-290) (Mil-C-5541) 25525 20.0 25534 25526 25.0 25535 MALE/FEMALE FEMALE Note: Female standoffs longer than 19mm may be tapped from both ends STAINLESS BRASS ALUMINUM STAINLESS BRASS ALUMINUM CAT. NO. CAT. NO. CAT. NO. L CAT. NO. CAT. NO. CAT. NO. 4.5 HEX DIA. (M2.5 THREAD) METRIC NYLON LOCK-IN SUPPORT —— — 5.0 24460 24380 24420 —— — 6.0 24461 24381 24421 • One end locks into chassis, the other end locks into the PC Board. —— — 8.0 24462 24382 24422 24283 24307 24331 10.0 24463 24383 24423 24284 24308 24332 12.0 24464 24384 24424 FOR 4,00 DIA. 24285 24309 24333 15.0 24465 24385 24425 MOUNTING HOLE 6,00 24286 24310 24334 18.0 24466 24386 24426 FOR 1,57 24287 24311 24335 20.0 24467 24387 24427 THICK PCB 4,83 24288 24312 24336 25.0 24468 24388 24428 5.0 HEX DIA. (M3 THREAD) L CAT. NO. L DIM —— — 5.0 24470 24390 24430 FOR 1,57 CHASSIS 8843 3.0 —— — 6.0 244 1 24391 24431 7 8844 4.0 —— — 8.0 24472 24392 24432 8845 6.0 24289 24313 24337 10.0 24473 24393 24433 FOR 4,00 DIA. 3,18 MOUNTING HOLE 8846 8.0 24290 24314 24338 12.0 24474 24394 24434 8847 10.0 24291 24315 24339 15.0 24475 24395 24435 8848 12.0 24292 24316 24340 18.0 24476 24396 24436 8849 14.0 24293 24317 24341 20.0 24477 24397 24437 8850 16.0 24294 24318 24342 25.0 24478 24398 24438 8851 18.0 Material: Nylon 6/6, UL Rated 94V-0 5.5 HEX DIA. (M3 THREAD) —— — 5.0 24480 24400 24440 —— — 6.0 24481 24401 24441 METRIC SCREWS —— — 8.0 24482 24402 24442 Choice of: Steel, Zinc Plate • Nylon: 6/6, UL Rated 94V-2 24295 24319 24343 10.0 24483 24403 24443 24296 24320 24344 12.0 24484 24404 24444 24297 24321 24345 15.0 24485 24405 24445 STEEL NYLON 6/6 24298 24322 24346 18.0 24486 24406 24446 CAT. NO. L CAT. NO. 24299 24323 24347 20.0 24487 24407 24447 M2.5 THREAD 24300 24324 24348 25.0 24488 24408 24448 29301 6.00 29331 6.0 HEX DIA. (M4 THREAD) 29304 12.00 29334 29306 16.00 29336 —— — 5.0 24490 24410 24450 M3 THREAD —— — 6.0 24491 24411 24451 29311 6.00 29341 —— — 8.0 24492 24412 24452 ** ** ** 29314 12.00 29344 24301 24325 24349 10.0 24493 24413 24453 L * * * 29316 16.00 29346 24302 24326 24350 12.0 24494 24414 24454 THREAD 29318 25.00 29348 24303 24327 24351 15.0 24495 24415 24455 M4 THREAD 24304 24328 24352 18.0 24496 24416 24456 29321 6.00 29351 24305 24329 24353 20.0 24497 24417 24457 29324 12.00 29354 24306 24330 24354 25.0 24498 24418 24458 29326 16.00 29356 * Internal Thread: 8.0mm deep ** Internal Thread: 6.0mm deep See page 132 for metric nuts 29328 25.00 29358 Note: Female standoffs longer than 19mm may be tapped from both ends ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 72 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED THREAD THREAD METRIC STANDOFFS AND SPACERS SWAGE FORCE FIT STANDOFFS / SWAGE THREADED STANDOFFS FORCE-FIT STANDOFFS ROUND HEX ROUND A broaching-type fastener/standoff for installation in panels and circuit boards .060 (1.52) and thicker made of plastic and other non-ductile materials. Available threaded or with clearance holes. Easy to install, presses into punched or drilled holes. MATERIAL: Stainless Steel per ASTM-A581/A582 HEX O.D. MOUNTING HOLES: .147 (3.7) hole for 2-56 THREAD THREAD .166 (4.2) hole for 4-40 .213 (5.4) hole for 6-32 H H TOLERANCE ON MOUNTING HOLES: +.003/-.000 O.D. O.D. .105 (2.7) .105 (2.7) L.D. L.D. L L .060 .060 MATERIAL: Brass, ASTM-B16, Nickel Plate (QQ-N-290) [1.52] [1.52] A A For .062 (1.52) thick boards MAX. MAX. Threaded Clear Hole ROUND HEX H L.D. SHANK CAT. NO. HEIGHT ABOVE PANEL DIAMETER CAT NO. THREADED 2-56 THREAD  .156 (4.0) O.D. L 1589-2 .125 (3.2) .125 (3.2) 1731-2 CAT. NO. LENGTH O.D. A THREAD 1590-2 .187 (4.7) .125 (3.2) 1734-2 4860 .065 (1.7) .219 (5.6) .165 (4.2) 2-56 1591-2 .250 (6.4) .125 (3.2) 1740-2 4861 065 (1.7) .219 (5.6) .184 (4.7) 1596-2 .375 (9.5) .125 (3.2) 1743-2 4862 .125 (3.2) .219 (5.6) .184 (4.7) 4-40 THREAD  .187 (4.7) O.D. 4863 .250 (6.4) .219 (5.6) .184 (4.7) 4-40 2260-2 .125 (3.2) .139 (3.5) 2270-2 4864 .375 (9.5) .219 (5.6) .184 (4.7) 2261-2 .187 (4.7) .139 (3.5) 2271-2 2262-2 .250 (6.4) .139 (3.5) 2272-2 4865 * .500 (12.7) .219 (5.6) .184 (4.7) 2263-2 .375 (9.5) .139 (3.5) 2273-2 4866 .065 (1.7) .281 (7.1) .231 (5.9) 2264-2 .500 (12.7) .139 (3.5) 2274-2 4867 .125 (3.2) .281 (7.1) .231 (5.9) 6-32 4-40 THREAD 
.250 (6.4) O.D. 4868 .250 (6.4) .281 (7.1) .231 (5.9) 1560A .125 (3.2) .187 (4.7) 1653-2 4869 .375 (9.5) .281 (7.1) .231 (5.9) 1790-2 .187 (4.7) .187 (4.7) 1746-2 4870 * .500 (12.7) .281 (7.1) .231 (.59) 1650-2 .250 (6.4) .187 (4.7) 1627-2 *Thread depth .375 (9.5) 1651-2 .375 (9.5) .187 (4.7) 1628-2 1623-2 .500 (12.7) .187 (4.7) 1629-2 CLEAR HOLE 1624-2 .625 (15.9) .187 (4.7) 1654-2 L 1625-2 .750 (19.1) .187 (4.7) 1655-2 CAT. NO. LENGTH O.D. A HOLE 1792-2 .875 (22.2) .187 (4.7) 1749-2 4850 .065 (1.7) .219 (5.6) .184 (4.7) 1652-2 1.000 (25.4) .187 (4.7) 1630-2 4851 .125 (3.2) .219 (5.6) .184 (4.7) 6-32 THREAD  .250 (6.4) O.D. 4852 .250 (6.4) .219 (5.6) .184 (4.7) .116 (2.9) 1560B .125 (3.2) .187 (4.7) 1620-2 4853 .375 (9.5) .219 (5.6) .184 (4.7) For # 4 1612-2 .187 (4.7) .187 (4.7) 1752-2 4854 .500 (12.7) .219 (5.6) .184 (4.7) 1546 .250 (6.4) .187 (4.7) 1621-2 1561B .375 (9.5) .187 (4.7) 1622-2 4855 .065 (1.7) .281 (7.1) .231 (5.9) 1604-2 .500 (12.7) .187 (4.7) 1758-2 4856 .125 (3.2) .281 (7.1) .231 (5.9) 1605-2 .625 (15.9) .187 (4.7) 1759-2 4857 .250 (6.4) .281 (7.1) .231 (5.9) .143 (3.6) 1608-2 .750 (19.1) .187 (4.7) 1761-2 4858 .375 (9.5) .281 (7.1) .231 (5.9) For # 6 1796-2 .875 (22.2) .187 (4.7) 1775-2 4859 .500 (12.7) .281 (7.1) .231 (5.9) 1609-2 1.000 (25.4) .187 (4.7) 1784-2 SWAGE CLEAR HOLE SPACERS SWAGE STAKING TOOLS Precision made staking tool kits are made from .250 .250 (6.4) diameter heat treated steel, zinc plated. Each kit [6.4] includes the correct swage top staking tool anvil to create a professional appearance. These tools may be used with an arbor press or hand tapped. C H .109 [2.8] HC CAT. NO. HEIGHT ABOVE PANEL HOLE .187 [4.8] 5058-2 .125 (3.2) 5060-2 .250 (6.4) .120 (3.0) 5061-2 .375 (9.5) For # 4 CAT. NO. STANDOFF DIA. THREAD HOLE SIZE 5062-2 .500 (12.7) TL-19 .156 (4.0) 2-56 — 5059-2 .125 (3.2) TL-22 .187 (4.7) 4-40 — 5063-2 .250 (6.4) .140 (3.5) MATERIAL: Brass, ASTM-B16, TL-20 .250 (6.4) 4-40 — 5064-2 .375 (9.5) For # 6 Nickel Plate (QQ-N-290) 5065-2 .500 (12.7) TL-21 .250 (6.4) 6-32 .120 (3.0) For .062 (1.52) thick boards ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 73 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED ROUND CLEAR HOLE SPACERS CLEAR L BRASS ALUMINUM NYLON PHENOLIC L CLEAR MATERIAL: HOLE O.D. LENGTH CAT. NO. CAT. NO. CAT. NO. CAT. NO. LENGTH O.D. HOLE Brass: ASTM-B16, Nickel Plate (QQ-N-290) .125 (3.2) 1909 2036 Aluminum: ASTM B211, Clear Iridite (MIL-C-5541) 875 — .125 (3.2) Nylon: Nylon 6/6, UL Rated 94V-2 .250 (6.4) 1454A 3457 876 360 .250 (6.4) Phenolic: PBE Grade Natural Color Phenolic .375 (9.5) 1454B 3458 877 361 .375 (9.5) .500 (12.7) 1454C 3459 878 362 .500 (12.7) .120 (3.0) .250 (6.4) .625 (15.9) 1919 2314 879 — .625 (15.9) .250 (6.4) .120 (3.0) BRASS ALUMINUM .750 (19.1) 1454D 3460 880 363 .750 (19.1) For #4 For #4 .875 (22.2) 1920 3402 881 — .875 (22.2) 1.000 (25.4) 1454E 3461 882 364 1.000 (25.4) 1.500 (38.1) 1924 3462 779 365 1.500 (38.1) 2.000 (50.8) 1925 3463 — 366 2.000 (50.8) .125 (3.2) 1934 3403 883 — .125 (3.2) .250 (6.4) 1457A 3464 884 367 .250 (6.4) .375 (9.5) 1457B 3465 885 368 .375 (9.5) .500 (12.7) 1457C 3466 886 369 .500 (12.7) .140 (3.5) .250 (6.4) .625 (15.9) 1935 3429 887 — .625 (15.9) .250 (6.4) .140 (3.5) For #6 .750 (19.1) 1457D 3467 888 370 .750 (19.1) For #6 .875 (22.2) 1936 3438 889 — .875 (22.2) O.D. 1.000 (25.4) 1457E 3468 890 371 1.000 (25.4) 1.500 (38.1) 1937 3469 789 372 1.500 (38.1) 2.000 (50.8) 1938 3470 — 373 2.000 (50.8) .125 (3.2) 1942 4258 891 — .125 (3.2) HOLE .250 (6.4) 1480 3471 892 1490 .250 (6.4) .375 (9.5) 1481 3472 893 1491 .375 (9.5) .500 (12.7) 1482 3473 894 1492 .500 (12.7) L .171 (4.3) .250 (6.4) .625 (15.9) 2032 4259 895 — .625 (15.9) .250 (6.4) .171 (4.3) For #8 .750 (19.1) 1483 3474 896 1493 .750 (19.1) For #8 .875 (22.2) 2033 4260 897 — .875 (22.2) 1.000 (25.4) 1484 3475 898 1494 1.000 (25.4) 1.500 (38.1) 2034 3476 799 374 1.500 (38.1) NYLON PHENOLIC 2.000 (50.8) 2035 3477 — 375 2.000 (50.8) .250 (6.4) 1662 4261 790 453 .250 (6.4) .375 (9.5) 1663 4262 791 454 .375 (9.5) .500 (12.7) 1664 4263 792 455 .500 (12.7) .625 (15.9) 1665 4264 793 — .625 (15.9) .196 (5.0) .312 (7.9) .750 (19.1) 1666 4265 794 456 .750 (19.1) .312 (7.9) .196 (5.0) For #10 .875 (22.2) 1667 4266 795 — .875 (22.2) For #10 1.000 (25.4) 1668 4267 796 457 1.000 (25.4) 1.500 (38.1) 1669 4268 797 458 1.500 (38.1) — 459 2.000 (50.8) 1672 4269 2.000 (50.8) ALUMINUM ECONOMY SPACERS • Made of flat strip aluminum and rolled on precision equipment. SCREW CLEARANCE SCREW CLEARANCE • Assures maximum bearing surface, square ends. # 4 # 6 # 8 L # 4 # 6 # 8 L Aluminum: LENGTH CAT. NO. CAT. NO. CAT. NO. LENGTH CAT. NO. CAT. NO. CAT. NO. 5052-H34 per QQ-A-250/8b .750 (19.1) 418 425 432 .187 (4.7) 397 — — .875 (22.2) 419 426 433 .250 (6.4) 398 405 412 1.000 (25.4) 420 427 434 .312 (7.9) 399 406 413 • Tight Joint on Outside Diameter SPACER FOR I.D. O.D. REF. 1.250 (31.8) 421 428 435 .375 (9.5) 400 407 414 # 4 .120 (3.0) .167 (4.3) O.D. L 1.500 (38.1) 422 429 436 .437 (11.1) 401 408 415 # 6 .148 (3.8) .193 (4.9) 1.750 (44.5) — 430 437 .500 (12.7) 402 409 416 I.D. # 8 .176 (4.5) .232 (5.9) 2.000 (50.8) — — 438 .625 (15.9) 403 410 417 CERAMIC STANDOFFS MILITARY • Ideal for very high temperature conditions • Exceptional strength in compression and tension CAT. L T D • Commercial and military types available • Withstands very high voltage without flashover NO. LENGTH O.D. THREAD DEPTH NL # • Military types meet MIL-1-010, • Special sizes available upon request 7661 .500 (12.7) .375 (9.5) 6-32 .156 (4.0) NL523W01-004 NL # clearly marked 7662 .625 (15.9) .375 (9.5) 6-32 .250 (6.4) NL523W01-005 7663 .625 (15.9) .500 (12.7) 8-32 .187 (4.7) NL523W02-005 7664 .750 (19.1) .375 (9.5) 6-32 .250 (6.4) NL523W01-006 COMMERCIAL 7665 .750 (19.1) .500 (12.7) 8-32 .250 (6.4) NL523W02-006 O.D. CAT. L T D 7666 1.000 (25.4) .375 (9.5) 6-32 .375 (9.5) NL523W01-008 NO. LENGTH O.D. THREAD DEPTH 7667 1.000 (25.4) .500 (12.7) 8-32 .375 (9.5) NL523W02-008 7710 .250 (6.4) .250 (6.4) 6-32 THRU 7668 1.000 (25.4) .750 (19.1) 10-32 .375 (9.5) NL523W03-008 7711 .500 (12.7) .250 (6.4) 6-32 .156 (4.0) 7669 1.250 (31.8) .375 (9.5) 6-32 .375 (9.5) NL523W01-010 THREAD 7712 .375 (9.5) .375 (9.5) 6-32 .156 (4.0) 7670 1.250 (31.8) .500 (12.7) 8-32 .375 (9.5) NL523W02-010 7713 .500 (12.7) .375 (9.5) 6-32 .156 (4.0) 7671 1.250 (31.8) 1.000 (25.4) 1/4 - 20 .437 (11.1) NL523W04-010 D 7714 .500 (12.7) .500 (12.7) 6-32 .140 (3.6) 7672 1.500 (38.1) .375 (9.5) 6-32 .375 (9.5) NL523W01-012 L 7715 .750 (19.1) .500 (12.7) 6-32 .250 (6.4) 7673 1.500 (38.1) .500 (12.7) 8-32 .375 (9.5) NL523W02-012 D 7716 1.000 (25.4) .500 (12.7) 6-32 .375 (9.5) 7674 1.500 (38.1) .750 (19.1) 10-32 .375 (9.5) NL523W03-012 7717 1.500 (38.1) .500 (12.7) 6-32 .562 (14.3) 7675 1.500 (38.1) 1.000 (25.4) 1/4 - 20 .500 (12.7) NL523W04-012 7718 2.500 (63.5) .500 (12.7) 6-32 .500 (12.7) 7676 2.000 (50.8) .375 (9.5) 6-32 .375 (9.5) NL523W01-016 7719 2.500 (63.5) .750 (19.1) 1/4 - 20 .750 (19.1) 7677 2.000 (50.8) .500 (12.7) 8-32 .375 (9.5) NL523W02-016 7720 4.000 (101.6 .750 (19.1) 1/4 - 20 .750 (19.1) MATERIAL: Grade L5 Ceramic 7678 2.000 (50.8) .750 (19.1) 10-32 .375 (9.5) NL523W03-016 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 74 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SPACERS & STANDOFFS RETAINING SPACERS & HINGED STANDOFFS NYLON RETAINING SPACERS CLEAR HOLE Similar to our standard spacers, but with a specially configured I.D. designed to grip the outside of the screw shank. The spacer slides on the screw easily, but is retained on the screw. For use in applications L requiring pre-assembly of the screw and spacer, to reduce final assembly cost. OD ID .156 (3.9) Clear Hole for #4 Screw .198 (5.0) Clear Hole for #6 Screw .240 (6.1) Clear Hole for #8 Screw .277 (7.0) Clear Hole for #10 Screw CAT. CAT. CAT. CAT. NO. LENGTH O.D. I.D. NO. LENGTH O.D. I.D. NO. LENGTH O.D. I.D. NO. LENGTH O.D. I.D. 2341 .125 (3.2) 2361 .125 (3.2) 2381 .125 (3.2) 2391 .125 (3.2) 2342 .250 (6.4) 2362 .250 (6.4) 2382 .250 (6.4) 2392 .250 (6.4) 2343 .375 (9.5) 2363 .375 (9.5) 2383 .375 (9.5) 2393 .375 (9.5) 2344 .500 (12.7) .250 .102 2364 .500 (12.7) .312 .128 2384 .500 (12.7) .375 .152 2394 .500 (12.7) .500 .177 2345 .625 (15.9) (6.4) (2.6) 2365 .625 (15.9) (7.9) (3.3) 2385 .625 (15.9) (9.5) (3.8) 2395 .625 (15.9) (12.7) (4.5) 2346 .750 (19.1) 2366 .750 (19.1) 2386 .750 (19.1) 2396 .750 (19.1) 2347 .875 (22.2) 2367 .875 (22.2) 2387 .875 (22.2) 2397 .875 (22.2) 2348 1.00 (25.4) 2368 1.00 (25.4) 2388 1.00 (25.4) 2398 1.00 (25.4) HINGED STANDOFFS • Applications unlimited • Time saving • Space saving • Interconnect circuits or services without danger of shorting MATERIAL: Brass, ASTM-B16. Zinc Plate and Yellow Chromate FEMALE/FEMALE CAT. L DT NO. LENGTH U P DIAMETER THREAD D 351 .750 (19.1) .172 (4.4) .375 (9.5) 352 1.000 (25.4) .250 (6.4) .625 (15.9) .187 (4.7) 4-40 U 330 1.250 (31.8) .250 (6.4) .625 (15.9) 353 .750 (19.1) .172 (4.4) .375 (9.5) L 354 1.000 (25.4) .250 (6.4) .625 (15.9) .250 (6.4) 6-32 P 331 1.250 (31.8) .250 (6.4) .625 (15.9) U 355 .750 (19.1) .172 (4.4) .375 (9.5) 356 1.000 (25.4) .250 (6.4) .625 (15.9) .250 (6.4) 8-32 T 332 1.250 (31.8) .250 (6.4) .625 (15.9) MALE/FEMALE D CAT. LDT U NO. LENGTH S U DIAMETER THREAD 333 .625 (15.9) .250 (6.4) .172 (4.4) L .187 (4.7) 4-40 334 .875 (22.2) .250 (6.4) .250 (6.4) .250 [6.4] 335 .625 (15.9) .312 (7.9) .172 (4.4) .250 (6.4) 6-32 336 .875 (22.2) .312 (7.9) .250 (6.4) S T 337 .625 (15.9) .312 (7.9) .172 (4.4) .250 (6.4) 8-32 338 .875 (22.2) .312 (7.9) .250 (6.4) MALE/MALE D 90° S P L CAT. LDT NO. LENGTH S P DIAMETER THREAD 357 .500 (12.2) .250 (6.4) .250 (6.4) .187 (4.7) 4-40 358 .500 (12.2) .312 (7.9) .250 (6.4) .250 (6.4) 6-32 S T 359 .500 (12.2) .312 (7.9) .250 (6.4) .250 (6.4) 8-32 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 75 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED INSULATED PC SPACER/SUPPORTS • Board will be electrically insulated, eliminates need for insulating washers • No tool required for installation • Easy snap-in assembly• One pieces design eliminates the need for additional screws and nuts • Fits snug onto board • Accommodates varying board thicknesses • Flame retardant .156 (4.0) .156 (4.0) SLIMLINE TENSION-FIT SLIMLINE LOCK-IN • One end permanently attaches to .070 (1.78) max. thick chassis • One end permanently attaches to .070 (1.78) max. thick chassis • Other end tension fits to .062 (1.57) max. thick PC board • Other end permanently attaches to .062 (1.57) max. thick • Board is easily releasable for repairs or upgrades PC board • Low insertion force • Low insertion force • Small footprint frees up board space. FOR .156 [4.0] DIA. MOUNTING HOLE FOR .156 [4.0] DIA. .275 .275 MOUNTING HOLE [7.0] [7.0] .400 [10.2] FOR .062 [1.57] FOR .062 [1.57] .350 [8.9] CAT. L CAT. L THICK PCB THICK PCB NO. LENGTH NO. LENGTH .187 (4.8) .187 (4.8) CHASSIS 1927A .250 (6.4) 1927B .250 (6.4) .546 .070 [1.78] .546 L L [13.9] MAX. [13.9] 1928A .375 (9.5) 1928B .375 (9.5) 1929A .500 (12.7) 1929B .500 (12.7) 1930A .625 (15.9) 1930B .625 (15.9) .203 [5.2] .203 [5.2] CHASSIS 1931A .750 (19.1) 1931B .750 (19.1) .070 [1.78] FOR .187 [4.8] DIA. FOR .187 [4.8] DIA. MAX. MOUNTING HOLE MOUNTING HOLE 1932A .875 (22.2) 1932B .875 (22.2) 1933A 1.000 (25.4) 1933B 1.000 (25.4) MATERIAL: Nylon 6/6, UL Rated 94V-0 MATERIAL: Nylon 6/6, UL Rated 94V-0 .156 (4.0) STURDY LOCK-IN .156 (4.0) STURDY TENSION-FIT • One end permanently attaches to .031(.79) -.078 (2.0) thick • Both ends permanently attaches to .031 (.79) - .078 (2.0) chassis thick chassis or board • Other end tension fits to .062 (1.57) max thick PC board • Sturdy support due to high contact area • Board is easily releasable for repairs or upgrades • Sturdy support due to high contact area FOR .156 [4.0] DIA. .280 MOUNTING HOLE FOR .156 [4.0] DIA. .280 [7.1] MOUNTING HOLE [7.1] .400 [10.2] FOR .062 [1.57] .218 [5.6] FOR THICK PCB .187 (4.8) .156 (4.0) .062 [1.57] CAT. L CAT. L THICK PCB NO. LENGTH NO. LENGTH .562 [14.3] L 8800 .187 (4.7) 8815 .187 (4.7) L .562 [14.3] FOR .062 [1.57] CHASSIS 8801 .250 (6.4) FOR 8816 .250 (6.4) .062 [1.57] 8802 .375 (9.5) CHASSIS 8817 .375 (9.5) .218 [5.6] .100 8803 .500 (12.7) 8818 .500 (12.7) [2.6] FOR .187 [4.8] DIA. MOUNTING HOLE 8804 .625 (15.9) 8819 .625 (15.9) FOR .156 [4.0] DIA. MOUNTING HOLE 8805 .750 (19.1) 8820 .750 (19.1) MATERIAL: Nylon 6/6, UL Rated 94V-0 8806 .875 (22.2) MATERIAL: Nylon 6/6, UL Rated 94V-0 8821 .875 (22.2) .156 (4.0) .125 (3.2) SLIMLINE LOCK-IN RELEASE STURDY LOCK-IN RELEASE • Locks onto .062 (1.57) thick PC board • Locks onto .062 (1.57) thick PC board • Board is positively locked until manually released • Board is positively locked until manually unlocked • Board is easily releasable for repairs or upgrades • Board is easily releasable for repairs or upgrades • Sturdy support due to high contact area with chassis • Compact design uses smaller mounting holes FOR .156 [4.0] DIA. FOR .125 [3.2] DIA. MOUNTING HOLE .280 MOUNTING HOLE [7.1] .171 [4.4] CAT. L .400 [10.2] FOR .062 [1.57] NO. LENGTH FOR .062 [1.57] THICK PCB .343 [8.7] THICK PCB 8807 .187 (4.7) .125 (3.2) .187 (4.8) .562 [14.3] 8808 .250 (6.4) L .375 [9.5] CAT. L L FOR .062 [1.57] 8809 .375 (9.5) NO. LENGTH FOR .062 [1.57] CHASSIS CHASSIS 8810 .500 (12.7) 8871 .187 (4.7) .156 [4.0] .218 [5.6] 8811 .625 (15.9) 8872 .250 (6.4) 8812 .750 (19.1) 8873 .375 (9.5) FOR .125 [3.2] DIA. FOR .187 [4.8] DIA. MOUNTING HOLE MOUNTING HOLE 8813 .875 (22.2) 8874 .500 (12.7) 8814 1.000 (25.4) 8875 .625 (15.9) MATERIAL: Nylon 6/6, UL Rated 94V-0 MATERIAL: Nylon 6/6, UL Rated 94V-0 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 76 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED INSULATED PC SPACERS SUPPORTS / INSULATED PC SPACERS SUPPORTS / INSULATED PC SPACERS/SUPPORTS • Board will be electrically insulated, eliminates need for insulating washers • Easy snap-in assembly • No tool required for installation • Designed for .062 (1.57) thick boards • One piece design eliminates the need for additional screws and nuts • Slim design frees up board space .125 (3.2) .100 (2.6) TENSION-FIT EASY LOCK-IN • One end permanently attaches to chassis • Both ends permanently attach to chassis and board • Other end secures board with tension fit. • Teardrop style mounting end eases assembly • Board easily releasable for repairs or upgrades • Low protrusion above board and under chassis FOR .125 [3.2] DIA. FOR .100 [2.6] DIA. MOUNTING HOLE MOUNTING HOLE .171 .180 [4.6] [4.4] FOR .062 [1.57] FOR .062 [1.57] CAT. L THICK PCB .150 [3.8] THICK PCB .150 [3.8] NO. LENGTH .125 (3.2) .100 (2.6) 8879 .125 (3.2) L L FOR .062 [1.57] FOR .062 [1.57] 8880 .187 (4.7) CAT. L THICK CHASSIS THICK CHASSIS 8881 .250 (6.4) NO. LENGTH .150 [3.8] .140 [3.6] 8882 .375 (9.5) 8888 .125 (3.2) FOR .100 [2.6] DIA. FOR .125 [3.2] DIA. 8883 .500 (12.7) 8889 .187 (4.7) MOUNTING HOLE MOUNTING HOLE 8884 .625 (15.9) 8890 .250 (6.4) 8885 .750 (19.1) 8891 .375 (9.5) 8886 .875 (22.2) 8892 .500 (12.7) 8893 .625 (15.9) 8887 1.000 (25.4) MATERIAL: Nylon 6/6, UL Rated 94V-0 MATERIAL: Nylon 6/6, UL Rated 94V-0 .156 (4.0) .125 (3.2) LOCK-IN THREADED • Both ends permanently attach to chassis and board FOR .156 [4.0] DIA. • Secure mounting end design allows for taller spacing MOUNTING HOLE .312 [7.9] HEX. FOR .062 [1.57] .400 [10.2] THICK PCB L L FOR .125 [3.2] DIA. .312 MOUNTING HOLE .180 [7.9]* [4.6] .250 8-32 THREAD FOR .062 [1.57] .125 (3.2) [6.4] THREAD THICK PCB .140 [3.6] FOR NO. 6 [M3.5] CAT. L SELF-TAPPING SCREW NO. LENGTH • One end attaches to L 9018 .125 (3.2) chassis with screw or FOR .062 [1.57] MALE L FEMALE THICK CHASSIS tapped hole 9019 .187 (4.7) CAT. NO. LENGTH CAT. NO. .140 [3.6] • Other end snap locks onto 9020 .250 (6.4) 9048 .250 (6.4) 9041 .062 (1.6) board 9021 .375 (9.5) FOR .125 [3.2] DIA. 9049 .375 (9.5) 9042 • Board is releasable for easy MOUNTING HOLE 9022 .500 (12.7) 9050 .500 (12.7) 9043 repair or upgrades 9023 .625 (15.9) 9051 .625 (15.9) 9044 9024 .750 (19.1) 9052 .750 (19.1) 9045 9025 .875 (22.2) 9053 9046 .875 (22.2) 9026 1.000 (25.4) 9054 9047 MATERIAL: Nylon 6/6, UL Rated 94V-0 MATERIAL: Nylon 6/6, UL Rated 94V-0 1.000 (25.4) THRU HOLE SPACERS STACKING SPACERS One end locks into panel. Clear hole designs for #4, #6 or #8 screw. One end locks into panel. Clear hole designs for #4, #6 or #8 screw. • Base has larger surface area. Will not deform • Spacers can be stacked for multiple level under heavy pre-load. PC board applications • Self-aligning Outside Inside Mounting Screw Outside Inside Mounting Screw L L CAT. CAT. NO. LENGTH Diameter Diameter Hole Size NO. LENGTH Diameter Diameter Hole Size 9027 .125 (3.2) 8829 .125 (3.2) 9028 .187 (4.7) 8830 .187 (4.7) FOR .062 [1.57] 9029 .250 (6.4) .260 .125 .187 FOR .062 [1.57] 8831 .250 (6.4) .260 .125 .187 THICK PCB #4 #4 THICK PCB 9030 .375 (9.5) (6.6) (3.2) (4.7) 8832 .375 (9.5) (6.6) (3.2) (4.7) .125 [3.2] .125 [3.2] 9031 .500 (12.7) 8833 .500 (12.7) 9032 .625 (15.9) 8834 .625 (15.9) L L 9033 .250 (6.4) 8835 .250 (6.4) 9034 .375 (9.5) .281 .153 .234 8836 .375 (9.5) .312 .153 .234 I.D. O.D. #6 #6 9035 .500 (12.7) (7.1) (3.9) (5.9) 8837 .500 (12.7) (7.9) (3.9) (5.9) SELF-ALIGNING O.D. C'BORE 9036 .625 (15.9) 8838 .625 (15.9) I.D. 9037 .250 (6.4) 8839 .250 (6.4) 9038 .375 (9.5) .281 .169 .234 8840 .375 (9.5) .312 .169 .234 #8 #8 9039 .500 (12.7) (7.1) (4.3) (5.9) 8841 .500 (12.7) (7.9) (4.3) (5.9) MATERIAL: Nylon 6/6, MATERIAL: Nylon 6/6, 9040 .625 (15.9) 8842 .625 (15.9) UL Rated 94V-0 UL Rated 94V-0 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 77 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED INSULATED PC SPACERS SUPPORTS / • Board will be electrically insulated, eliminates need for insulating washers • No tool required for installation • Easy snap-in assembly ADHESIVE LOCK-IN RELEASE SUPPORTS • One end attaches to chassis with self adhesive pads • Other end snap into .062 (1.57) board • No drilling to chassis required leaving outside in perfect condition • Board is easily releasable for repair or upgrade ADHESIVE MOUNT SLIMLINE ADHESIVE MOUNT .156 (4.0) .125 (3.2) FOR .156 [4.0] DIA MOUNTING HOLE FOR .125 [3.2] DIA .280 [7.1] MOUNTING HOLE FOR .062 [1.57] .400 [10.2] FOR .062 [1.57] .344 [8.8] THICK PCB THICK PCB .109 .172 [4.4] .109 [2.8] L L [2.8] .500 [12.7] .700 [17.8] ADHESIVE TAPE WITH TAB ADHESIVE TAPE SQUARE SQUARE CAT. L CAT. L NO. LENGTH NO. LENGTH 9080 .187 (4.7) 9070 .187 (4.7) 9081 .250 (6.4) 9071 .250 (6.4) 9082 .375 (9.5) 9072 .375 (9.5) 9083 .500 (12.7) 9073 .500 (12.7) 9084 .625 (15.9) 9074 .625 (15.9) Material: Nylon 6/6, UL Rated 94V-0 Material: Nylon 6/6, UL Rated 94V-0 PC SPACER SUPPORTS • One end locks into chassis • Other end supports the PC Board • Ideal for mid supports of large boards • Simplifies assembly for multiple support applications • Reduces the amount of holes required in PC board STURDY SUPPORT SLIMLINE SUPPORT • One end permanently attaches to .062 (1.57) chassis • One end permanently attaches to .062 (1.57) chassis • Accommodates varying board thicknesses • Low protrusion under chassis • Sturdy support due to large contact area • Small diameter frees up space on PC board .280 [7.1] .171 [4.4] CAT. L .562 [14.3] L L NO. LENGTH FOR .062 [1.57] FOR .062 [1.57] CAT. L THICK CHASSIS CHASSIS 8822 .187 (4.7) NO. LENGTH .187 (4.8) .100 (2.8) .150 [3.8] 8823 .250 (6.4) 9055 .125 (3.2) .218 [5.6] FOR .100 [2.6] DIA. 8824 .375 (9.5) 9056 .187 (4.7) FOR .187 [4.8] DIA. MOUNTING HOLE 8825 .500 (12.7) MOUNTING HOLE 9057 .250 (6.4) 8826 .625 (15.9) 9058 .375 (9.5) 8827 .750 (19.1) 9059 .500 (12.7) 8828 .875 (22.2) 9060 .625 (15.9) Material: Nylon 6/6, UL Rated 94V-0 Material: Nylon 6/6, UL Rated 94V-0 REVERSE CHASSIS MOUNT SUPPORTS • Permanently attaches to .059 (1.51) - .065 (1.65) thick case from outside • Provides flat clean cosmetic appearance • Ideal for low clearance applications or for mounting directly to case walls .156 (4.0) .125 (3.2) LOCK-IN RELEASE SLIMLINE LOCK-IN • End locks onto .062 (1.57) PC board • End permanently attaches to .062 (1.57) PC board • Board is positively locked until manually released • Small footprint frees up PC board space • Board is easily releasable for repairs or upgrades FOR .156 [4.0] DIA. .203 [5.2] MOUNTING HOLE FOR .125 [3.2] DIA. .400 [10.2] FOR .062 [1.57] MOUNTING HOLE .171 THICK PCB [4.4] FOR .062 [1.57] THICK PCB .187 [4.8] .500 [12.7] L .375 [9.5] L .213 (5.4) .187 (4.8) .070 FOR .213 [5.4] DIA. .060 [1.8] MOUNTING HOLE CAT. L CAT. L FOR .187 [4.8] DIA. [1.5] MOUNTING HOLE NO. LENGTH NO. LENGTH 9065 .250 (6.4) 9061 .250 (6.4) 9066 .375 (9.5) 9062 .375 (9.5) 9067 .500 (12.7) 9063 .500 (12.7) 9068 .625 (15.9) 9064 .625 (15.9) Material: Nylon 6/6, UL Rated 94V-0 Material: Nylon 6/6, UL Rated 94V-0 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 78 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED INSULATED PC SPACERS SUPPORTS / SPACERS/STANDOFF KITS SPACERS/STANDOFF ORGANIZER KITS Maintain a neat complete inventory of the most frequently used spacers and standoffs in day-to-day operations. Choice of 14 different kits of the most popular spacers and standoffs. An assortment of various sizes and styles in Brass, Aluminum and Nylon with tapped or thru hole. Supplied with clear draw cabinet labeled for easy identification. Kits combine the most frequently used spacers or standoffs for stacking and a multi-stacking prototyping. CLEAR HOLE SPACER KITS SPACER ASSORTMENT KITS ENGINEERING DESIGN KITS Assortment of 400 total spacers: Brass, Aluminum, Nylon, Assortment of 1500 pieces in .250, .375, .500, .750 and 1.000 Rolled Aluminum, with lengths of .250, .500, .750 and 1.000. lengths, with clearance holes for #4, #6 and #8. 25 pieces of each size. Complete with cabinet. 100 pieces of each size. Complete with cabinet. CAT. CAT. NO. KIT SUPPLIED WITH NO. KIT SUPPLIED WITH SCR-4 #4 Clear Hole Spacers SPR-13 Brass Nickel Plated Spacers SCR-6 #6 Clear Hole Spacers SPR-34 Aluminum Spacers with Iridite Finish SCR-8 #8 Clear Hole Spacers SPR-8 Nylon 6/6 Spacers THREADED STANDOFF KITS HEX STANDOFF KITS METRIC STANDOFF KITS Assortment of 400 total standoffs: Female-Female standoffs Assortment of 425 total pieces. Female-Female standoffs and and Male–Female standoffs both Aluminum and Nylon, with Male-Female standoffs both aluminum and nylon, with lengths lengths of .250, .500, .750 and 1.000. of 10mm, 12mm, 15mm and 20mm. 25 pieces of each size. Complete with cabinet and 25 pieces of each size. Complete with cabinet and 25 machine screws with matching thread. 25 machine screws with matching threads. CAT. NO. KIT SUPPLIED WITH CAT. STR-440 4-40 Threaded Standoffs NO. KIT SUPPLIED WITH STR-632 6-32 Threaded Standoffs STR-M3 M3 Threaded Standoffs STR-832 8-32 Threaded Standoffs STR-M4 M4 Threaded Standoffs FEMALE-FEMALE STANDOFF KITS MALE-FEMALE STANDOFF KITS Brass kit is an assortment of 750 pieces of .500, .750, 1.000, Assortment of 1500 pieces in .250, .375, .500, .750 and 1.000 and 1.500 long standoffs with 4-40, 6-32 and 8-32 thread. lengths, with thread sizes of 4-40, 6-32, and 8-32. Complete with cabinet. 100 pieces of each size. Complete with cabinet. Stainless kit is an assortment of 250 pieces of .250, .500, .750, and 1.000 long standoffs with 4-40, 6-32 and 8-32 thread. Complete with cabinet and CAT. 25 pieces of each screw size. NO. KIT SUPPLIED WITH STR-15 Round Brass Zinc Plated Standoffs CAT. NO. KIT SUPPLIED WITH STR-35 Round Aluminum Standoffs with Iridite Finish STH-14 Hex Brass Zinc Plated Standoffs STH-19 Brass-Nickel Plate Standoffs STH-22 Hex Aluminum Standoff with Iridite Finish STH-20 Stainless Steel Standoffs SELF-RETAINING SPACER ENGINEERING DESIGN KIT CIRCUIT BOARD SPACER/SUPPORT ENGINEERING DESIGN KITS Assortment of 400 total pieces per kit of a variety of Circuit Assortment of 400 total pieces per kit of Self Retaining Round Board Hardware in .125, .250, .375 and .500 lengths in Nylon Spacers. Lengths of .125, .250, .500 and .750 Nylon 6/6 material. 25 pieces of each size/style. 25 pieces of each size/style. Complete with cabinet. Complete with cabinet. CAT. NO. KIT SUPPLIED WITH SlimLine Products – Tension Fit; Lock-In, CBH-1 Easy Lock and Single Sided Lock-In Products - Tension Fit; Lock-In, CAT. CBH-2 NO. KIT SUPPLIED WITH Easy Lock and Single Sided SCR-10 #4, #6, #8 & #10 Spacers CBH-3 Stacking Products – Thru-Hole and Self Aligning ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 79 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PANEL HARDWARE Our diverse selection of panel hardware is second to none in the marketplace. Our Handles, Screws, Knobs, Fan Guards and LED lens and mounting spacers provides the right solution for a variety of applications, including: • Rack Mounted Equipment • Carrying Cases • Low Friction Assemblies • “D” Subminiature connector Hardware • Instrumentation Panels and Gauges • Environments where mounting hardware is subject to loss • For protection from damage or debris • To dress up chassis access panels, racks or controls Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoHS and REACH directives. We provide 3D modeling, CAD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application. PANEL HARDWARE SECTION CONTENTS FAN FILTERS & GUARDS . . . . . . . . . .88-89 SCREWS HANDLES Panel Mounting . . . . . . . . . . . . . . . . . . . . . . . . .82 Contempory . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 Jack Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Ferrules / Screws . . . . . . . . . . . . . . . . . . . . . . . .87 Captive Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Instrumentation . . . . . . . . . . . . . . . . . . .86-87 Shoulder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 Thumb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 KNOBS (INSTRUMENTATION) . . . . . . . . . .85 MISCELLANEOUS HARDWARE LED HARDWARE Panel Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . .84 Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 Panel Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 Lens and Caps . . . . . . . . . . . . . . . . . . . . . . . . . .90 Shaft Coupling . . . . . . . . . . . . . . . . . . . . . . . . . .84 Spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91 Shaft Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 INSTRUMENT CASES . . . . . . . . . . . . . . . . . . .85 Volume Control Extender . . . . . . . . . . . . . . . .84 81 JACK SCREWS • Equivalent to AMP, CANNON & TRW Jack Screws • “D” subminiature connector mounting screw • Custom lengths available • Hardware supplied unassembled and in bulk SPECIFICATIONS: YELLOW: Steel, Zinc Plate and Yellow Chromate; CLEAR: Steel, Zinc Plate and Clear Chromate; STAINLESS: Stainless Steel STANDARD JACK SCREWS SEMS JACK SCREWS .187 [4.8] • Captivated helical spring lockwasher, simplifies use 4-40 THREAD .100 [2.6] MIN. DEEP .187 [4.8] 4-40 THREAD JACK SCREW .187 [4.8] .100 [2.6] MIN. DEEP SEMS JACK 4-40 THREAD L .187 [4.8] SCREW (2) FLAT LOCKWASHER WASHERS L LOCKWASHER 4-40 THREAD NUT FLAT WASHER NUT JACK ONLY JACK WITH HARDWARE* YELLOW CLEAR STAINLESS L YELLOW CLEAR STAINLESS CAT. NO. CAT. NO. CAT. NO. LENGTH CAT. NO. CAT. NO. CAT. NO. SEMS JACK ONLY SEMS JACK WITH HARDWARE* 7228 7228-5 7248 .250 (6.4) 7229 7229-5 7249 CLEAR L CLEAR 7230 7230-5 7250 .312 (7.9) 7231 7231-5 7251 CAT. NO. LENGTH CAT. NO. 7241 7241-5 7252 .375 (9.5) 7242 7242-5 7253 7235 .285 (7.3) 7236 7243 7243-5 7254 .500 (12.7) 7244 7244-5 7255 7237 .347 (8.8) 7238 7239 .660 (16.8) 7240 7232 7232-5 7256 .625 (15.8) 7233 7233-5 7257 *Hardware supplied unassembled in bulk *Hardware supplied unassembled in bulk SLOTTED JACK SCREWS JACK SCREWS WITH NYLON PATCH .187 [4.8] 4-40 THREAD SCREWDRIVER .100 [2.6] MIN. DEEP SLOT .187 [4.8] 4-40 THREAD JACK SCREW .187 [4.8] .100 [2.6] MIN. DEEP 4-40 THREAD L .187 [4.8] (2) FLAT WASHERS • Nylon patch holds jack • Slot provides ability firmly in vibration L to install jack with LOCKWASHER NYLON PATCH NUT applications. a screwdriver. JACK ONLY JACK WITH HARDWARE* YELLOW CLEAR L YELLOW CLEAR CAT. NO. CAT. NO LENGTH CAT. NO. CAT. NO. JACK WITH NYLON PATCH YELLOW CLEAR STAINLESS L 7270 7275 .250 (6.3) 7290 7295 CAT. NO. CAT. NO. CAT. NO. LENGTH 7271 7276 .312 (7.9) 7291 7296 7260 7261 7262 .250 (6.4) 7272 7277 .375 (9.5) 7292 7297 7263 7264 7265 .312 (7.9) 7273 7278 .500 (12.7) 7293 7298 7274 7279 .625 (15.8) 7294 7299 7266 7267 7268 .375 (9.5) *Hardware supplied unassembled in bulk TURNABLE JACK SCREWS DIRECT ACCESS STRAIGHT KNURL SLIM LINE L 2.000 [50.8] .410 [10.4] .516 [13.1] 1.800 [45.7] H .375 [9.5] T .187 [4.8] DIA. .375 [9.5] .625 [15.9] .235 [6.0] .218 .140 .187 [4.8] DIA. [5.6] [3.6] 4-40 4-40 KNURL .078 [1.98] DIA. THREAD KNURL .093 [2.36] DIA. 4-40 THREAD .078 [1.98] DIA. THREAD KNURL .156 [4.0] DIA. .125 [3.2] DIA. MATERIAL: Steel, Nickel Plate MATERIAL: Steel, Black Oxide MATERIAL: Steel, Zinc Plate & Clear Chromate WITHOUT SLOT WITH SLOT TL WITHOUT SLOT WITH SLOT H DIM. DIM. WITHOUT SLOT WITH SLOT DIM. CAT. NO. CAT. NO. CAT. NO. CAT. NO. 2064 2065 .125 (3.2) .250 (6.4) CAT. NO. CAT. NO. 2068 2069 1.250 (31.8) . 2066 2067 250 (6.4) .437 (11.1) 2072 2073 2070 2071 1.750 (44.5) PANEL MOUNTING HARDWARE “U” CLIP “BOW TIE” RETAINING CLIP SADDLE WASHER .365 [9.3] .265 [6.8] .550 [14.0] .200 [5.1] .068 [1.73] .012 [0.30] MAX. .250 [6.4] L .437 [11.1] 4-40 THREAD 4-40 THREAD 4-40 THREAD .280 [7.1] CLEARANCE HOLE .187 [4.8] .203 [5.2] Supplied Unassembled Supplied Unassembled Supplied Unassembled CAT. NO. L MATERIAL: MATERIAL: MATERIAL: 2060 .250 (6.4) Clip & Screw: Steel, Zinc Plate Clip & Screw: Steel, Zinc Plate Clip & Screw: Steel, Zinc Plate 2061 .281 (7.1) CAT. NO. 2062 CAT. NO. 2063 & Yellow Chromate & Yellow Chromate & Yellow Chromate ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 82 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED COMPUTER HARDWARE PANEL SCREWS CAPTIVE PANEL SCREWS MATERIAL: Stainless Steel per ASTM-A581/A-582 STRAIGHT .062 [1.57] .078 [1.98] STRAIGHT KNURL TH'D TH'D P.D. KNURL .312 [7.9] 82° .312 [7.9] DIA. 90° DIA. S.D. S.D. W P.L. .046 [1.2] .187 [4.8] .281 [7.2] .312 [7.9] S.L. S.L. T.L. CAT. S.D. S.L. W CAT. T.L. S.D. S.L. P.D. P.L. ± ± + - .005 (.13) .010 (.25) .015 (+.38) .000 ±.015 (.38) ±.005 (.13) ± .010 (.25) +000. -.016 (-.40) ± .015 (.38) NO. THREAD NO. THREAD 8700 4-40 .078 (2.0) .375 (9.5) .036 (.091) 8706 4-40 .125 (3.2) .078 (2.0) .171 (4.3) .078 (2.0) .078 (2.0) 8701 4-40 .078 (2.0) .500 (12.7) .036 (.091) 8707 4-40 .125 (3.2) .078 (2.0) .296 (7.5) .078 (2.0) .078 (2.0) 8702 4-40 .078 (2.0) .625 (15.9) .036 (.091) 8708 4-40 .125 (3.2) .078 (2.0) .421 (10.7) .078 (2.0) .078 (2.0) 8703 6-32 .095 (2.41) .375 (9.5) .045 (1.14) 8709 6-32 .218 (5.5) .095 (2.41) .187 (4.7) .095 (2.41) .093 (2.36) 8704 6-32 .095 (2.41) .500 (12.7) .045 (1.14) 8710 6-32 .218 (5.5) .095 (2.41) .312 (7.9) .095 (2.41) .093 (2.36) 8705 6-32 .095 (2.41) .625 (15.9) .045 (1.14) 8711 6-32 .218 (5.5) .095 (2.41) .437 (11.1) .095 (2.41) .093 (2.36) 4-40 6-32 8-32 .125 [3.2] LENGTH .125 [3.2] LENGTH .156 [4.0] LENGTH .046 [1.17] .250 .046 [1.17] .187 .062 [1.6] .218 [6.4] [4.8] [5.6] .312 [7.9] .281 [7.2] .250 [6.4] DIA. DIA. DIA. 4-40 6-32 8-32 .120 [3.1] .095 [2.4] .078 [2.0] THREAD .062 [1.57] THREAD THREAD DIA. .046 [1.17] DIA. DIA. .046 [1.17] CAT. NO. LENGTH CAT. NO. LENGTH CAT. NO. LENGTH 2415 .531 (13.5) 2418 .656 (16.7) 2413 .469 (11.9) 2416 .593 (15.1) 2419 .718 (18.2) 2414 .531 (13.4) 2417 .656 (16.7) 2420 .781 (19.8) THUMB SCREWS STAINLESS BRASS NYLON DIA. .437 [11.1] DIA. DIA. A .187 [4.8] H .250 [6.4] .125 [3.2] LENGTH .781 [19.9] LENGTH THREAD THREAD THREAD MATERIAL: Stainless Steel CAT. NO. LENGTH THREAD DIA MATERIAL: Nylon 6/6, UL Rated 94V-2 2400 .312 (7.9) 2401 .375 (9.5) CAT. NO. LENGTH THREAD DIA. H A 4-40 .312 (7.9) 2500 .250 (6.4) 2402 .437 (11.1) 2501 .375 (9.5) 4-40 .300 (7.6) .280 (7.1) .125 (3.2) 2403 .500 (12.7) 2502 .500 (12.7) 2404 .312 (7.9) 2503 .250 (6.4) 2405 .375 (9.5) 6-32 .312 (7.9) 2504 .375 (9.5) 6-32 .360 (9.1) .275 (7.0) .125 (3.2) 2406 .437 (11.1) 2505 .500 (12.7) 2407 .500 (12.7) CAT. NO. THREAD 2506 .250 (6.4) 2408 .375 (9.5) 1708 6-32 2507 .375 (9.5) 8-32 .425 (10.8) .305 (7.7) .140 (3.6) 2409 .437 (11.1) 8-32 .375 (9.5) 1709 8-32 MATERIAL: Brass, 2508 .500 (12.7) 2410 .500 (12.7) 1710 10-32 Nickel Plate ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 83 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PRECISION GROUND SHOULDER SCREWS Shoulder ground to +.000/-.001 Dia, +.002 /-.000 Length. Material: Stainless Steel, ASTM A581/A582 8-32 4-40 6-32 .187 .156 [4.0] L [4.8] .187 .125 [3.2] L .187 [4.8] .156 .125 [3.2] L [4.8] DIA. [4.0] .156 [4.0] .124 [3.2] DIA. .375 [9.5] DIA. .281 [7.1] DIA. .250 [6.4] DIA. DIA. 8-32 .032 [0.81] x THREAD 6-32 4-40 .032 [0.81] x .032 [0.81] x .005 [0.13] DEEP THREAD THREAD .005 [0.13] DEEP .005 [0.13] DEEP SOCKET SLOTTED SLOTTED SOCKET SLOTTED SOCKET CAT. NO. LENGTH CAT. NO. CAT. NO. LENGTH CAT. NO. 2431 .125 (3.2) 2451 CAT. NO. LENGTH CAT. NO. 2421 .125 (3.2) 2441 2432 .250 (6.4) 2452 2425 .125 (3.2) 2445 2422 .250 (6.4) 2442 2433 .375 (9.5) 2453 2426 .250 (6.4) 2446 2423 .375 (9.5) 2443 2434 .500 (12.7) 2454 2427 .375 (9.5) 2447 2424 .500 (12.7) 2444 2435 .625 (15.9) 2455 2428 .500 (12.7) 2448 SHAFT LOCKS For .250 (6.4) SHAFT For .250 (6.4) SHAFT FOR .250 [6.4] .375-32 DIA. SHAFT THREAD FOR .250 [6.4] .375-32 .187 .437 [11.1] .218 [4.8] DIA. SHAFT THREAD [5.6] HEX LOCKNUT 1.00 [25.4] .500 DIA. KNURL .500 [12.7] [12.7] LOCKNUT HEX SHAFT .500 [12.7] .500 [12.7] .375-32 THREAD HEX .375-32 THREAD MATERIAL: Brass, Nickel Plate MATERIAL: Brass, Nickel Plate CAT. NO. 1701 CAT. NO. 1702 .250 (6.4) SHAFT COUPLING PANEL BEARINGS STANDARD and MINIATURE C D .437 [11.1] .156 [4.0] 6-32 SET B HEX. SCREW NUT • Two set screws hold .500 [12.7] .253 [6.5] A E TH'D shaft securely DIA. DIA. MATERIAL: Brass, Nickel Plate .750 [19.1] MATERIAL: Brass, Nickel Plate Supplied unassembled Set Screws: Steel, Zinc Plate Supplied unassembled CAT. NO. A B (HEX) C D E THREAD 1705 .253 (6.5) .437 (11.1) .500 (12.7) .437 (11.1) .375–32 Standard 1706 .128 (3.3) .343 (8.7) .437 (11.1) .375 (9.5) .250–32 Miniature CAT. NO. 1453 VOLUME CONTROL EXTENDERS PANEL NUTS For .250 (6.4) volume control shafts having For Volume Controls, Switches, Tip Jacks, etc. .375-32 threaded bushings. .375-32 THREAD .253 [6.5] DIA. .500 [12.7] A B CAT. NO. FOR THREAD DIAMETER THICKNESS 1448 Mounting 1/4 -32 .375 Hex .093 (2.38) CAT. NO. AB 1449 Mini. Control 1/4 -32 .312 Hex .078 (1.98) 1464 .625 (15.9) .250 (6.4) 1456 Vol. Control 3/8 -32 .500 Hex .093 (2.38) 1465 .625 (15.9) .375 (9.5) 1458 Switch 15/32 -32 .562 Hex .078 (1.98) 1466 .687 (17.4) .500 (12.7) 1459 Switch Ring 15/32-32 .625 Knurled .062 (1.57) 1467 .750 (19.1) .250 (6.4) 1472 Filter 15/16 -32 .375 Hex .093 (2.38) MATERIAL: Brass, Nickel Plate MATERIAL: Brass,Nickel Plate ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 84 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PANEL HARDWARE INSTRUMENTATION CASES & KNOBS PHENOLIC INSTRUMENT CASES • Choice of Sizes • Sturdy construction • Flush mounting panels B A • Aluminum or Phenolic Panels Available C MATERIALS: MATERIALS: Phenolic Panels: .062 (1.57) Glossy Black Phenolic Cases: .125 (3.2) Wall thickness, Phenolic, MIL-P3115C Molded Glossy Black Phenolic, MIL-M-14, CFG Aluminum Panels: .062 (1.57), 5052-H34 per QQ 318 C; Bright finished surface with pressure sensitive protective covering tape COVER PANEL PHENOLIC CASE PHENOLIC ALUMINUM PANEL PANEL THREAD A B C SIZE AND TYPE CAT. NO. CAT. NO. CAT. NO. • Cases and panels are sold separately 715 2.500 (63.5) 3.500 (88.9) 1.250 (31.8) 4-40 TAPPED 2050 2051 • Covers available in Phenolic or Aluminum 703 2.875 (73.0) 4.000 (101.6) 1.562 (39.7) 4-40 TAPPED 2042 2044 • Covers can be machined to accept dials, 705 2.875 (73.0) 4.000 (101.6) 1.562 (39.7) USE #4 SELF TAPPING SCREW 2042 2044 switches, displays 704 3.125 (79.4) 5.875 (149.2) 2.250 (57.2) 4-40 TAPPED 2043 2045 • Panel mounting screws available - 700 3.750 (95.3) 6.250 (158.8) 2.000 (50.8) 6-32 BRASS INSERT 2037* 2046 Refer to page 133 716 4.250 (108.0) 5.000 (127.0) 1.750 (44.5) 6-32 BRASS INSERT 2052* 2053 • Sturdy case can be machined for wiring access 701 5.250 (133.4) 6.812 (173.0) 2.312 (58.7) 6-32 BRASS INSERT 2038* 2047 • Ideal for prototype or lab use 702 7.375 (187.3) 8.375 (212.7) 3.000 (76.2) 6-32 BRASS INSERT 2039* 2048 *.093 (2.36) INSTRUMENTATION KNOBS • All knobs supplied with two set screws installed SPECIFICATIONS SHAFT ATTACHMENT DETAILS NUT CLEARANCE Knob: ABS Inlay: Spun Aluminum CAT.SHAFT D H M L B I.D.C (C’BORE Insert: Brass, Nickel Plate NO. (DIA.) (DIA.) (HEIGHT) (MAX.) (LOCATION) (DEPTH) (DIA.) DEPTH) — D 8554 .125 (3.2) .500 (12.7) .660 (16.8) .320 (8.1) .570 (14.5) .360 (9.1) .170 (4.3) — 8555 .250 (6.4) .700 (17.8) .780 (19.8) .360 (9.1) .680 (17.3) .500 (12.7) .180 (4.6) H B L — 8556 .250 (6.4) .920 (23.4) 1.010 (25.7) .460 (11.7) .910 (23.1) .640 (16.3) .330 (8.4) C I.D. — 8557 .250 (6.4) 1.250 (31.8) .828 (21.0) .400 (10.2) .700 (17.8) 1.010 (25.7) .250 (6.4) M 8558 .125 (3.2) .500 (12.7) .660 (16.8) .915 (23.4) .320 (8.1) .570 (14.5) .360 (9.1) .170 (4.3) D 8559 .250 (6.4) .700 (17.8) .780 (19.8) 1.150 (29.2) .357 (9.1) .660 (16.7) .480 (12.2) .180 (4.6) H B L 8560 .250 (6.4) .920 (23.4) 1.010 (25.7) 1.520 (38.6) .500 (12.7) .910 (23.1) .640 (16.3) .240 (6.1) I.D. C 8561 .250 (6.4) 1.250 (31.8) .920 (23.4) 1.860 (47.2) .470 (11.9) .800 (20.3) .780 (19.8) .350 (8.9) M 8567 .125 (3.2) .500 (12.7) .500 (12.7) .610 (15.5) .160 (4.0) .405 (10.3) .410 (10.4) .030 (0.8) D H 8568 .250 (6.4) .700 (17.8) .625 (15.9) .820 (20.8) .210 (5.3) .480 (12.2) .468 (11.9) .030 (0.8) B L C I.D. 8569 .250 (6.4) .920 (23.4) .780 (19.8) 1.090 (27.7) .240 (6.1) .660 (16.8) .640 (16.3) .100 (2.5) M D 8565 .250 (6.4) 700 (17.8) .630 (16.0) 1.187 (30.2) .210 (5.3) .510 (13.0) .570 (14.5) .030 (0.8) H B L 8566 .250 (6.4) .920 (23.4) .640 (16.3) 1.510 (38.6) .260 (6.6) .540 (13.7) .730 (18.5) .120 (3.1) I.D. C ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 85 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED CARRYING HANDLES This retractable handle is manufactured with black leather-like material and Nickel Plated steel hardware. Handle folds flat when not in use. Mounts with #6 screws (not supplied). LENGTH .156 [4.0] DIA. (6) PLS .281 [7.2] .562 [14.3] A .250 [6.4] (2) PLS CAT. NO. LENGTH A 8351 4.500 (114.3) 6.000 (152.4) 8352 5.500 (139.7) 7.000 (177.8) 8353 6.000 (152.4) 7.500 (190.5) Folds flat on case when not in use. Mounts with rivets or #6 screws (not supplied). 2.562 [65.1] REF. 4.968 [126.2] 1.850 [47.0] REF. 1.062 [27.0] .875 [22.3] .500 [12.7] MIN. 5.687 [144.5] 1.375 [35.0] 1.375 [35.0] 4.000 [101.6] .156 [4.0] DIA. (4) PLS 3.562 [90.5] .593 [15.1] 10-32 THREAD MATERIAL: (2) PLS Grip: Polypropylene, Black CAT. NO. COLOR Post: Steel, Nickel Plate CAT. NO. 7196 8356 BLACK Pin: Steel, Nickel Plate MATERIAL: Zinc, Satin Brushed, Nickel Plate OVAL INSTRUMENTATION HANDLES ALUMINUM A B D .500 (12.7) B CAT. NO. MTG. CTRS. HEIGHT DEPTH RADIUS 7186 4.000 (101.6) 1.750 (44.5) D 544 4.000 (101.6) 2.000 (50.8) 10-32 540 4.500 (114.3) 1.750 (44.5) THREAD 545 4.500 (114.3) 2.000 (50.8) A .500 (12.7) .625 .281 541 5.000 (127.0) 1.750 (44.5) [15.9] [7.2] 546 5.000 (127.0) 2.000 (50.8) 542 5.500 (139.7) 1.750 (44.5) 547 5.500 (139.7) 2.000 (50.8) 7187 6.000 (152.4) 1.375 (34.9) .375 (9.5) 543 6.000 (152.4) 1.750 (44.5) 548 6.000 (152.4) 2.000 (50.8) .500 (12.7) MATERIAL: 7188 6.437 (163.5) 1.750 (44.5) Aluminum: QQ-A-200, Alloy 6061-T6, Black Anodized per MIL-A-8625 CUSTOM HANDLES Keystone is fully integrated to meet your total design and production needs. Our specialty is manufacturing custom designs and modifications of standard items. Forward your CAD drawing or print to our Engineering Department for a quote on your specific production requirements or visit our “Part Builder” at www.keyelco.com ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 86 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED HANDLES INSTRUMENTATION HANDLES ROUND INSTRUMENTATION HANDLES FERRULES FERRULES FOR ROUND HANDLES CHOICE of BRASS or ALUMINUM • To protect and support panel surface B R D E THREAD MATERIAL: Brass: ASTM-B16, Nickel Plate A T O.D. Aluminum: QQ-A-200, Alloy 6061-T6, C Black Anodized per MIL-A-8625 I.D. MATERIAL: BRASS ALUMINUM A B D E R C CAT. NO. CAT. NO. MTG. CTRS. HEIGHT DEPTH THREAD RADIUS DIAMETER Brass: ASTM-B16, Nickel Plate Aluminum: QQ-A-200, Alloy 6061-T6, Black Anodized per MIL-A-8625 7140 7170 1.250 (31.8) 1.000 (25.4) 7141 7171 2.000 (50.8) 1.000 (25.4) .375 (9.5) 4-40 .156 (4.0) .156 (4.0) BRASS ALUMINUM FOR FOR CAT. NO. CAT. NO. THREAD DIAMETER O.D. I.D. T 7142 7172 3.000 (76.2) 1.000 (25.4) .156 .250 .120 .125 9100 9110 (31.8) (15.9) 7162 7192 4-40 1.250 .625 (4.0) (6.4) (3.0) (3.2) 9101 9111 (38.1) (15.9) 1.500 .625 .187 .312 .120 .125 9120 9122 4-40 (4.7) (7.9) (3.0) (3.2) 9104 9114 (38.1) (19.1) 1.500 .750 .156 (4.0) 4-40 .187 (4.7) .187 (4.7) .187 .312 .144 .125 9121 9123 6-32 9102 9112 (44.5) (15.9) 1.750 .625 (4.7) (7.9) (3.7) (3.2) 9105 9115 (44.5) (19.1) 1.750 .750 .250 .375 .170 .187 7163 7193 8-32 (6.4) (9.5) (4.3) (4.7) 9103 9113 (50.8) (15.9) 2.000 .625 .312 .562 .196 .250 9106 9116 (31.8) (25.4) 1.250 1.000 7164 7194 10-32 (7.9) (14.3) (5.0) (6.4) 9107 9117 (38.1) (25.4) 1.500 1.000 .250 (6.4) 6-32 .187 (4.7) .187 (4.7) 9108 9118 (50.8) (25.4) 2.000 1.000 HANDLE MOUNTING SCREWS 9109 9119 76.2 (25.4) 3.000 ( ) 1.000 • Phillips drive pan head machine screws 7143 7173 76.2 (38.1) 3.000 ( ) 1.500 485 515 76.2 (44.5) 3.000 ( ) 1.750 480 510 (88.9) (38.1) 3.500 1.500 7144 7174 (101.6) (38.1) 4.000 1.500 486 516 (101.6) (44.5) 4.000 1.750 481 511 (114.3) (38.1) 4.500 1.500 .562 (14.3) 8-32 .250 (6.4) .250 (6.4) 487 517 (114.3) (44.5) 4.500 1.750 482 512 (127.0) (38.1) 5.000 1.500 488 518 (127.0) (44.5) 5.000 1.750 L 483 513 (139.7) (38.1) 5.500 1.500 THREAD 484 514 (152.4) (38.1) 6.000 1.500 489 519 (152.4) (44.5) 6.000 1.750 7145 7175 (76.2) (38.1) 3.000 1.500 MATERIAL: Stainless Steel 7146 7176 (101.6) (38.1) 4.000 1.500 493 523 (101.6) (44.5) CAT. L DRIVER 4.000 1.750 NO. LENGTH THREAD SIZE 490 520 114.3 (38.1) 4.500 ( ) 1.500 .250 (6.4) 9900 494 524 114.3) (44.5) 4.500 ( 1.750 .375 (9.5) 9901 4-40 1 7147 7177 (115.9) (38.1) 4.562 1.500 .500 (12.7) .562 (14.3) 10-32 .312 (7.9) 9902 .312 (7.9) 491 521 (127.0) (38.1) 5.000 1.500 .250 (6.4) 9903 495 525 (127.0) (44.5) .375 (9.5) 5.000 1.750 9904 6-32 2 .500 (12.7) 9905 492 522 (139.7) (38.1) 5.500 1.500 .375 (9.5) 9906 7148 7178 (152.4) (38.1) 6.000 1.500 .500 (12.7) 9907 8-32 2 496 526 (152.4) (44.5) 6.000 1.750 .750 (19.1) 9908 7149 7179 (163.5) (44.5) 6.437 1.750 .375 (9.5) 9909 7150 7180 (101.6) (34.9) 4.000 1.375 .500 (12.7) 9910 10-32 2 .375 (9.5) 10-32 .375 (9.5) .375 (9.5) 7151 7181 (152.4) (34.9) 6.000 1.375 .750 (19.1) 9911 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 87 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PLASTIC FAN FILTER ASSEMBLY A unique package consisting of guard, filter media and retainer. The guard and retainer are manufactured with UL Rated 94V-HB material. The filter media is made of polyester foam and aluminum mesh which allows free passage of air (24 CFM) with minimum air resistance and pressure drop. A major feature of this assembly is that when the filter media requires maintenance you simply remove the snap-fit retainer to clean or replace the filter, leaving the guard and fan in place. This assures protection to the fan blades and eliminates damage to the fan or equipment during cleaning. RETAINER MATERIAL: Glass filled Nylon 6/6, UL Rated HB • Snap-fit construction • Designed for minimum air restriction MEDIA MATERIAL: White Polyester foam and Aluminum screen FAN (Customer • Constructed to allow free passage of air with mimimum resistance Supplied) and pressure drop (24 CFM) • Has a high surface-area contact for impingement of dust particles • Helps reduce external fan noise GUARD • Easily cleaned by vacuuming or washing with mild soap, detergent or cleaning solvent • Replacement media available MEDIA GUARD MATERIAL: Glass filled Nylon 6/6, UL Rated HB • .250 (6.4) maximum ring spacing SNAP-FIT • Decreased noise level MEDIA RETAINER • Countersunk mounting holes (4) • Withstands high impact FAN GUARD & FILTER ASSEMBLIES MTG. MTG. .177 [4.5] DIA. .177 [4.5] DIA. CENTERS CENTERS MTG. HOLES MTG. HOLES HEIGHT WIDTH HEIGHT WIDTH Fig. 1 Fig. 2 FILTER ASSEMBLY FIG. FOR HEIGHT/ MTG. MEDIA ONLY CAT. NO. NO. FAN SIZE WIDTH THICKNESS CENTERS CAT. NO. 8443 1 1.50 (40mm) 1.839 (46.7) .327 (8.3) 1.260 (32.0) 8443-MO 8444 2 2.50 (60mm) 2.559 (65.0) .488 (12.4) 1.970 (50.0) 8444-MO 8487 2 3.12 (80mm) 3.408 (86.7) .488 (12.4) 2.840 (72.0) 8487-MO 8488 2 3.62 (92mm) 3.815 (96.9) .488 (12.4) 3.250 (82.5) 8488-MO 8489 2 4.50 (120mm) 4.961 (126.0) .496 (12.6) 4.130 (105.0) 8489-MO FAN GUARDS MTG. MTG. .177 [4.5] DIA. CENTERS CENTERS .177 [4.5] DIA. MTG. HOLES MTG. HOLES HEIGHT WIDTH HEIGHT WIDTH Fig. 3 Fig. 4 MTG. HOLE GUARD FIG. FOR HEIGHT/ CENTER CAT. NO. NO. FAN SIZE WIDTH THICKNESS SPACING 8445 3 1.50 (40mm) 1.681 (42.7) .169 (4.3) 1.260 (32.0) 8446 4 2.50 (60mm) 2.378 (60.4) .236 (6.0) 1.970 (50.0) 8497 4 3.12 (80mm) 3.177 (80.7) .236 (6.0) 2.840 (72.0) 8498 4 3.62 (92mm) 3.634 (92.3) .236 (6.0) 3.250 (82.5) 8499 4 4.50 (120mm) 4.741 (120.4) .244 (6.2) 4.130 (105.0) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 88 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PLASTIC FAN FILTER ASSEMBLY FAN/FINGER GUARDS METAL GUARDS Made of high quality steel wire which combines strength with superior forming. The units offer clean, strong butt welds with minimum flash and have consistent guard diameters to enhance maximum air-flow and venting. • Available for most popular size fans • Protects fingers as well as fan blades • Same mounting hole pattern as standard fans • Chrome Plate offers a high luster finish MATERIAL: Steel, Nickel Chrome Plate FITS 1.50” (40mm) FANS FITS 2.50” (60mm) FANS FITS 3.12” (80mm) FANS 2.810 [71.4] .195 SQUARE [5.0] 1.970 [50.0] .196 SQUARE [5.0] 1.260 [32.0] .189 SQUARE [4.8] 1.150 [29.2] .160 [4.1] DIA. DIA. (4) PLS .180 [4.6] DIA. 2.087 [53.0] DIA. (4) PLS .180 [4.6] DIA. 3.000 [76.2] DIA. (4) PLS CONSTRUCTION CONSTRUCTION CONSTRUCTION Rings: .063 (1.60) wire diameter Rings: .063 (1.60) wire diameter Rings: .063 (1.60) wire diameter CAT. NO. 8447 CAT. NO. 8449 CAT. NO. 8450 Ribs: .063 (1.60) wire diameter Ribs: .063 (1.60) wire diameter Ribs: .063 (1.60) wire diameter FITS 3.62” (92mm) FANS FITS 4.50” (120mm) FANS FITS 4.50” (120mm) FANS 3.250 [82.6] .195 4.125 [104.8] .217 4.125 [104.8] .223 SQUARE [5.0] SQUARE [5.5] SQUARE [5.7] .180 [4.6] DIA. .192 [4.9] DIA. 4.380 [111.3] DIA. 3.540 [89.9] DIA. 4.220 [107.2] DIA. .180 [4.6] DIA. (4) PLS (4) PLS (4) PLS CONSTRUCTION CONSTRUCTION CONSTRUCTION Rings: .063 (1.60) wire diameter Rings: .063 (1.60) wire diameter Rings: .071 (1.80) wire diameter CAT. NO. 8451 CAT. NO. 8448 CAT. NO. 8452 Ribs: .063 (1.60) wire diameter Ribs: .063 (1.60) wire diameter Ribs: .091 (2.31) wire diameter FITS 4.50” (120mm) FANS FITS 6.00” (150mm) FANS FITS 10.00” (250mm) FANS 6.850 [174.0] 4.125 [104.8] .217 SQUARE SQUARE [5.5] 6.380 [162.1] .180 [4.6] DIA. 4.551 [115.6] DIA. .180 [4.6] DIA. (4) PLS .250 .250 6.070 [154.2] .200 [5.1] DIA. (4) PLS [6.4] DIA. [6.4] 8.750 [222.3] DIA. (2) PLS CONSTRUCTION CONSTRUCTION CONSTRUCTION Rings: .091 (2.31) wire diameter Rings: .071 (1.80) wire diameter Rings: .071 (1.80) wire diameter CAT. NO. 8453 CAT. NO. 8455 CAT. NO. 8457 Ribs: .091 (2.31) wire diameter Ribs: .071 (1.80) wire diameter Ribs: .091 (2.31) wire diameter ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 89 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED LED LENS CAPS Designed for use with T-1 or T-1 3/4 LEDs, these Lens Caps are available in round The Lens Cap protects the LED from physical damage while guarding the components from or square configurations. They snap-mount through the front panel for easy, light-finger pres- electrostatic discharge (ESD), up to 16KV. More economical than indicator light assemblies, sure, intsallation. The LED is inserted into the cap from behind the panel and held securely the caps feature striated lines and fresnel rings which permit up to 180 viewing angles with in place. either diffused or non-diffused LED’s. They provide exceptionally high contrast and visibility. MATERIAL: Polycarbonate Available in Red, Green, Yellow and Clear ROUND CAPS .190 .430 [10.9] .280 [7.1] .190 [4.9] .280 [7.1] .430 [10.9] .290 [7.4] DIA. DIA. .220 [4.9] .290 [7.4] DIA. .070 .150 [5.6] DIA. .060 [1.78] [3.8] [1.52] .171 [4.4] DIA. .250 [6.4] DIA. .171 [4.4] DIA. .250 [6.4] DIA. FIG. 1 T-1 FIG. 2 T-1 3/4 FIG. 3 T-1 FIG. 4 T-1 3/4 LOW PROFILE STANDARD HEIGHT CAT. FIG. LED MTG. HOLE MIN. MTG. PANEL CAT. FIG. LED MTG. HOLE MIN. MTG. PANEL NO. COLOR NO. SIZE SIZE CENTERS THICKNESS NO. COLOR NO. SIZE SIZE CENTERS THICKNESS 8656 RED 8650 RED 8657 GREEN 8651 GREEN 3 T-1 .171 (4.3) .250 (6.4) .062 - .125 (1.57/3.18) 1 T-1 .171 (4.3) .250 (6.4) .031 - .062 (.79/1.57) 8658 YELLOW 8652 YELLOW 8659 CLEAR 8653 CLEAR 8668 RED 8662 RED 8663 GREEN 8669 GREEN 2T-1 3/4 .250 (6.4) .375 (9.5) .062 - .125 (1.57/3.18) 4 T-1 3/4 .250 (6.4) .375 (9.5) .031 - .250 (.79/6.4) 8670 YELLOW 8664 YELLOW (See Note) 8665 CLEAR 8671 CLEAR SQUARE CAPS .430 [10.9] .190 .280 [7.1] .280 [7.1] .430 [10.9] .220 [4.9] SQ. SQ. .290 [7.4] .070 SQ. [5.6] .060 [1.78] [1.52] .171 [4.4] DIA. .250 [6.4] DIA. .250 [6.4] SQ. FIG. 5 T-1 3/4 FIG. 6 T-1 FIG. 7 T-1 3/4 STANDARD HEIGHT LOW PROFILE CAT. FIG. LED MTG. HOLE MIN. MTG. PANEL CAT. FIG. LED MTG. HOLE MIN. MTG. PANEL NO. COLOR NO. SIZE SIZE CENTERS THICKNESS NO. COLOR NO. SIZE SIZE CENTERS THICKNESS 8674 RED 8680 RED .250 8675 GREEN 8681 GREEN 6 T-1 .171 (4.3) .250 (6.4) .062 - .125 (1.57/3.18) 5T-1 3/4 (6.4) .375 (9.5) .062 - .125 (1.57/3.18) 8676 YELLOW 8682 YELLOW SQUARE 8677 CLEAR 8683 CLEAR 8686 RED 8687 GREEN 7T-1 3/4 .250 (6.4) .375 (9.5) .031 - .250 (.79/6.4) 8688 YELLOW (See Note) 8689 CLEAR Note: When mounting T-1 3/4 Low Profile Caps (Fig. 4 or Fig. 7) in panels .125 (3.2) thick or less a spacer must be used. Spacer CAT. NO. 8692 MATERIAL: White Nylon .360 (9.1) O.D.
1/4 I.D. 1/8 Lg. “SNAP-IN” T-1 & T-1 3/4 LED HOLDERS Designed for use with T-1 or T-1 3/4 LED’s in .060 (1.52) - .070 (1.78) thick panels. The holder snaps into the front panel with easy, light-finger pressure. The LED snaps into the holder from behind the panel and is held securely in place. B C MATERIAL: Nylon 6/6, Black DIA. .030 CAT. LED MTG. HOLE [0.76] NO. SIZE A B C SIZE A DIA. 8309 T-1 .114 (2.9) .232 (5.9) .188 (4.8) .171 (4.3) 8310 T-1 3/4 .200 (5.0) .315 (8.0) .274 (6.9) .250 (6.4) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 90 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED LED LENS CAPS & HOLDERS LED SPACER MOUNTS “UNIVERSAL” FOR T-1 & T-1 3/4 • Unique design separates leads and retains Tri-Lead FOR T-1 3/4 and T-1 and Bi-Lead components. CAT. L CAT. L NO. LENGTH NO. LENGTH • Designed for PC board mounting of Tri-Lead and 8900 .120 (3.0) 8916 .400 (10.2) Bi-Lead T-1 and T-1 3/4 LEDS 8901 .140 (3.6) 8917 .420 (10.7) • Provides height control, lead retention and stability. 8902 .160 (4.1) 8918 .440 (11.2) • Also suitable for mounting lamps, resistors, transistors, 8903 .180 (4.6) 8919 .450 (11.4) diodes, capacitors, etc. 8904 .200 (5.1) 8920 .460 (11.7) .040 [1.02] MATERIAL: Black PVC, UL Rated 94V-0 8905 .220 (5.6) 8921 .480 (12.2) x .065 [1.65] .208 [5.3] SLOT (4) PLS 8906 .240 (6.1) 8922 .500 (12.7) TYP. 8907 .250 (6.4) 8923 .550 (14.0) .025 [0.62] DIA. 8908 .260 (6.6) 8924 .600 (15.2) .255 [6.5] 8909 .280 (7.1) 8925 .650 (16.5) DIA. 8910 .300 (7.6) 8926 .700 (17.8) 8911 .320 (8.1) 8927 .750 (19.1) L 8912 .340 (8.6) 8928 .800 (20.3) 8913 .350 (8.9) 8929 .850 (21.6) 8914 .360 (9.1) 8930 .900 (22.9) 8915 .380 (9.7) 8931 .925 (23.5) “SELF-ALIGNING” FOR BI-LEAD T-1 & T-1 3/4 KEY FEATURES • This features an internally tapered barrier which guides the leads and eliminates crimping or shorting. • Positive self-alignment of leads on .100 (.25) centers. • No special tools required • The bottom bosses serve the dual purpose of heat dissipation and easy post soldering cleanup. MATERIAL: Natural Nylon, UL Rated 94V-2 T-1 T-1 3/4 / / T-1 34T-1 T-1 34T-1 CAT. CAT. LA CAT. CAT. LA .197 .197 NO. NO. LENGTH REF. NO. NO. LENGTH REF. [5.0] [5.0] DIA. DIA. 8311 7351 .120 (3.0) 8327 7367 .400 (10.2) .093 [2.4] 8312 7352 .140 (3.6) 8328 7368 .420 (10.7) .100 [2.5] 8313 7353 .160 (4.1) 8329 7369 .440 (11.2) .100 [2.5] .075 (1.9) .325 (8.3) 8314 7354 .180 (4.6) 8330 7370 .450 (11.4) .133 [3.4] .157 [4.0] DIA. DIA. 8315 7355 .200 (5.1) 8331 7371 .460 (11.7) ( ) 8316 7356 .220 5.6 8332 7372 .480 (12.2) 8317 7357 .240 (6.1) 8333 7373 .500 (12.7) L L A A 8318 7358 .250 (6.4) 8334 7374 .550 (14.0) .450 (11.4) 8319 7359 260 (6.6) .190 (4.8) 8335 7375 .600 (15.2) 8320 7360 .280 (7.1) 8336 7376 .650 (16.5) .020 [0.5] .020 [0.5] .575 (14.6) ( ) 8321 7361 .300 7.6 8337 7377 .700 (17.8) .045 [1.1] .045 [1.1] .032 [0.81] .032 [0.81] DIA BOSSES DIA BOSSES SQUARE SQUARE 8322 7362 .320 (8.1) 8338 7378 .750 (19.1) (6) PLS. (6) PLS. [2] PLS [2] PLS 8323 7363 .340 (8.6) 8339 7379 .800 (20.3) .200 (5.1) 8324 7364 .350 (8.9) 8340 7380 .850 (21.6) .690 (17.5) ( ) 8325 7365 .360 9.1 8341 7381 .900 (22.9) ( ) ( ) ( ) 8326 7366 .380 9.7 .325 8.3 8342 7382 .925 23.5 “SELF-RETAINING” FOR T-1 KEY FEATURES • Features internal retention “teeth” which secure LED leads onto spacers. • Internal design eliminates crimping or shorting of leads • This features an internally tapered barrier which guides the leads and • Self alignment of leads on .100 (.25) centers. eliminates crimping or shorting. • Spacer will stay gripped to LED leads during assembly • The bottom bosses serve the dual purpose of heat dissipation and easy • No special tools required post soldering cleanup. T-1 T-1 MATERIAL: Natural Nylon, UL Rated 94V-2 CAT. LA CAT. LA NO. LENGTH REF. NO. LENGTH REF. 7030 .120 (3.0) 7046 .400 (10.2) .100 [2.5] 7047 .420 (10.7) 7031 .140 (3.6) .100 [2.5] 7032 .160 (4.1) 7048 .440 (11.2) .310 (7.9) 7033 .180 (4.6) .060 (1.5) 7049 .450 (11.4) 7034 .200 (5.1) 7050 .460 (11.7) .140 [3.6] DIA. 7035 .220 (5.6) 7051 .480 (12.2) 7052 .500 (12.7) 7036 .240 (6.1) L 7037 .250 (6.4) 7053 .550 (14.0) .435 (11.0) A 7038 .260 (6.6) 7054 .600 (15.2) 7039 .280 (7.1) 7055 .650 (16.5) .020 [0.5] 7040 .300 (7.6) 7056 .700 (17.8) .650 (14.2) .185 (4.7) .040 [1.0] .200 [5.1] 7057 .750 (19.1) 7041 .320 (8.1) DIA. BOSSES DIA. (6) PLS 7042 .340 (8.6) 7058 .800 (20.3) 7043 .350 (8.9) 7059 .850 (21.6) LEAD RETAINING .690 (17.5) AND DRAINAGE 7044 .360 (9.1) 7060 .900 (22.9) 7045 .380 (9.7) .310 (7.9) 7061 .925 (23.5) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 91 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PINS, PLUGS, JACKS & HARDWARE Our PCB pins & receptacles, solder terminals, tip, test, banana and binding post receptacles & terminals, and USB connectors and sockets offer the most versatility for virtually any device requirements such as: • Audio Circuitry • Home theaters • Electronic test equipment • Telephone switchboards • High Speed computer connections • Telecommunication hook ups • CATV equipment hook ups Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoHS and REACH directives. We provide 3D modeling, CAD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application. PINS, PLUGS, JACKS & SOCKETS SECTION CONTENTS JACKS AND PLUGS TRANSISTOR Audio Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . 110-111 Banana Jacks/Plugs . . . . . . . . . . . . . 106-107 Mounting Kits. . . . . . . . . . . . . . . . . . . . . 109-111 Binding Posts. . . . . . . . . . . . . . . . . . . . . . . . . . 108 Mica Insulators . . . . . . . . . . . . . . . . . . . . . . . . 109 Phono Jacks & Plugs . . . . . . . . . . . . . 102-103 T0-3 Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Test Jacks/Plugs . . . . . . . . . . . . . . . . 104-105 USB JACKS AND PLUGS MICRO PINS /JACKS 2.0 A and B-Type . . . . . . . . . . . . . . . . . . 94-95 Micro Jacks . . . . . . . . . . . . . . . . . . . . . . . 98-99 3.0 A and B-Type . . . . . . . . . . . . . . . . . . . . . . . 96 Micro Pins . . . . . . . . . . . . . . . . . . . . . . . 100-101 Firewire, IEEE 1394 . . . . . . . . . . . . . . . . . . . . . . 97 Shorting Jacks & Pins. . . . . . . . . . . . . . . . . . . 101 SOCKET, HALOGEN LAMP . . . . . . . . . . . . . . 110 93 USB 2.0 PLUGS & SOCKETS SOCKET SPECIFICATIONS: ELECTRICAL CHARACTERISTICS Shell: Phosphor Bronze DEVICE APPLICATIONS Rated Voltage: 30V (RMS) Insulator: Thermoplastic, UL Rated 94V-0 Ability to daisy chain more than one input device Contact Current Rating: 1 Amp DC max. ■ Contacts: Phosphor Bronze Mouse/Keyboards Contact Resistance: 15 m
max. ■ Contact Area: Gold Flash over Nickel MP3 Players Insulation Resistance: 1000 m
min. ■ Solder Trails: Tin over Nickel Printers/Scanners Dielectric Withstanding Voltage: 750V AC for 1 minute ■ Digital Cameras/Video ■ Memory Sticks PLUG SPECIFICATIONS: MECHANICAL CHARACTERISTICS ■ PDAs and Cell Phones Shell: Steel, Nickel Plate Operating Temperature: -13°F (-25°C) to +176°F Insulator: Thermoplastic, Rated UL 94V-0 (+80°C) Contact: Bronze, Gold Flash over Nickel Durability: 1500 Cycles min. TYPE A SOCKETS DUAL STACKING HORIZONTAL VERTICAL SURFACE MOUNT THRU HOLE MOUNT 920 921 .571 [14.5] .516 [13.1] .551 [14.0] .280 .272 [6.9] .571 [14.5] [7.1] .669 [17.0] .492 [12.5] .151 [3.8] .524 .571 [13.3] [14.5] .405 .189 [4.8] .615 [10.3] .606 [15.4] [15.6] 920 .112 [2.9] .551 [14.0] .571 [14.5] .177 [4.5] .118 [3.0] .280 .516 [13.1] .551 [14.0] .225 [5.7] [7.1] .280 .059 .163 [4.1] .405 [10.3] .224 [5.7] .275 [1.50] REF. [7.1] [7.0] .177 [4.5] .118 [3.0] .405 [10.3] 921 Mounting Detail Mounting Detail Cat. No. 920 Mounting Detail Cat. No. 921 Mounting Detail .036 [0.92] .079 [2.00] DIA. TYP. .043 [1.1] .276 [7.0] .036 [0.92] DIA. .079 [2.00] .036 [0.92] DIA. .276 [7.00] .079 [2.00] TYP. .107 [2.7 (4) PLS (4) PLS .276 [7.0] .079 [2.00] .276 [7.0] .142 [3.6] .224 [5.7] .114 [2.9] TYP. .210 [5.4] .107 [2.7] .107 [2.7] .091 [2.30] DIA. .091 [2.30] DIA. .091 [2.30] (2) PLS .091 [2.30] .517 [13.2] .517 [13.2] (2) PLS (4) PLS .517 [13.2] DIA. (2) PLS .517 [13.2] CAT. NO. 920 CAT. NO. 921 CAT. NO. 923 CAT. NO. 922 TYPE A PLUGS FEATURES • Available for on-board applications such as memory sticks • Cable clamp style for creating custom cables • Gold plated contacts for low contact resistance and excellent reliability SURFACE MOUNT THRU HOLE MOUNT CABLE PLUG .734 [18.7] .734 [18.7] •Supplied unassembled .472 [12.0] .472 [12.0] .087 [2.2] .240 .177 [4.5] .177 [4.5] .240 [6.1] [6.1] .106 [2.7] .047 [1.2] .047 [1.2] .079 [2.0] .079 [2.0] POS. 4 POS. 4 1.575 [40.00] REF. .035 [.90] DIA. .035 [.90] DIA. POS. 1 POS. 1 LEG (2) PLS LEG (2) PLS Mounting Detail Mounting Detail .043 [1.10] DIA. .461 [11.7] .472 [12.00] HOLE (2) PLS .177 [4.50] .181 [4.6] .043 [1.10] DIA. .461 [11.7] PCB EDGE HOLE (2) PLS .035 [0.9] x .181 [4.6] .098 [2.50] PCB EDGE .035 [0.9] x .114 [2.9] 14 .098 [2.50] .114 [2.9] 1 4 .098 [2.5] .083 [2.1] .035 [.90] DIA. .079 [2.0] .078 [2.0] X HOLE (4) PLS .043 [1.1] .276 [7.0] .079 [2.0] (4) PLS .276 [7.0] CAT. NO. 931 CAT. NO. 932 CAT. NO. 925 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 94 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED USB 2.0 PLUGS & SOCKETS USB 2.0 PLUGS & SOCKETS USB 2.0 PLUGS & SOCKETS SOCKET SPECIFICATIONS: Ability to daisy chain more than one input device ELECTRICAL CHARACTERISTICS Shell: Phosphor Bronze • Memory Sticks Rated Voltage: 30V (RMS) Insulator: Thermoplastic, UL Rated 94V-0 Contact Current Rating: 1 Amp DC max. • Mouse/Keyboards Contacts: Phosphor Bronze Contact Resistance: 15 m
max. • Printers/Scanners/Docking Stations Contact Area: Gold Flash over Nickel Insulation Resistance: 1000 M
min. • MP3/Audio Devices Solder Trails: Tin over Nickel Dielectric Withstanding Voltage: 750V AC for 1 minute • Digital Video Cameras & Still Cameras • Portable Media Players PLUG SPECIFICATIONS: MECHANICAL CHARACTERISTICS • Gaming Headsets Shell: Steel, Nickel Plate Operating Temperature: -13°F (-25°C) to +176°F (+80°C) Insulator: Thermoplastic, Rated UL 94V-0 Durability: 1500 Cycles min. • Smart Phones/PDA's Contact: Bronze, Gold Flash over Nickel DEVICE APPLICATIONS MICRO-USB TYPE B SOCKETS/PLUGS • Ideal for Miniature applications SURFACE MOUNT SOCKET CABLE PLUG .315 .022 [8.0] [0.6] .118 [3.00] .028 .150 [3.8] [0.7] .169 [4.3] .021 [0.55] .920 [23.5] REF. .085 [2.1] • Supplied unassembled Mounting Detail .197 .307 [5.0] [7.8] .026 [0.7] SPACING .149 [3.80] .320 [8.0] .031 [0.8] .016 [0.40] HOLE (2) PLS X .055 [1.4] CAT. NO. 940 (Bulk) .075 [1.9] SQR .210 [5.3] PCB EDGED .386 [9.8] CAT. NO. 940TR (Tape & Reel) .057 [1.4] .141 [3.6] Tape & Reel Spec’s: 24mm wide; 16mm pitch; .161 [4.1] CAT. NO. 941 13 inch reel (1000 pieces per reel) MINI-USB TYPE B SOCKETS/PLUGS SURFACE MOUNT SOCKET CABLE PLUG PIN 1 .378 [9.6] PIN 5 .039 [1.0] .156 [4.0] .173 [4.4] .232 [5.9] .965 [24.50] REF. .303 [7.7] • Supplied unassembled .059 [1.5] .116 [3.0] Mounting Detail Wiring Detail .428 [10.9] .268 [6.81] .020 [0.5] .217 [5.5] .031 [0.8] .080 [2.0] .181 [4.6] .120 [3.0] .129 [3.3] .166 [4.2] CAT. NO. 934 (Bulk) PIN 1 PIN 5 .205 [5.2] .098 [2.5] CAT. NO. 934TR (Tape & Reel) .035 [0.89] DIA Tape & Reel Spec’s: 24mm wide; 16mm pitch; PIN 1 PIN 5 .172 [4.4] PCB EDGE CAT. NO. 935 13 inch reel (1000 pieces per reel) USB TYPE B SOCKETS/PLUGS THRU HOLE SOCKET CABLE PLUG SURFACE MOUNT SOCKET .474 [12.0] • Supplied unassembled .474 [12.0] .630 [16.0] POS. 1 POS. 2 .630 [16.0] POS. 1 POS. 2 .418 [10.6] .418 [10.6] POS. 3 POS. 4 .115 [2.9] 1.439 [36.6] .047 [1.2] DIA .217 [5.5] REF. (2) PLS .354 [9.0] POS. 4 .405 [10.3] POS. 3 Mounting Detail .049 [1.3] Mounting Detail .118 [3.0] .028 [0.7] .098 [2.5] .134 [3.4] .036 [0.92] DIA. 3 2 4 1 POS. 2 HOLE (4) PLS .276 [7.0] POS. 3 POS. 1 .238 [6.0] .315 .283 [7.2] POS. 4 .147 [3.7] [8.0] .085 [2.1] .217 .354 [9.0] [5.5] .055 [1.40] DIA. REF. HOLE (2) PLS .545 [13.8] .376 [9.5] .091 [2.30] DIA. HOLE (2) PLS PCB EDGE CAT. NO. 924 CAT. NO. 933 CAT. NO. 926 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 95 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED USB 3.0 PLUGS & SOCKETS ELECTRICAL CHARACTERISTICS: USB 3.0 DESIGN ADVANTAGES: USB 3.0 (SUPER SPEED)DEVICE APPLICATIONS: Rated Voltage: 30V (RMS) Port Expansion: Alleviates restriction of limited • External hard drives Contact Current Rating: 1 Amp DC max. COM Ports and available IRQ’s • High resolution web & video cameras Contact Resistance: 15 m
max. Compatibility: Backward compatible with • Digital video cameras & still cameras Insulation Resistance: 1000 M
min. USB 2.0 devices • Multi-channel audio interfaces Dielectric Withstanding Voltage: 750V AC for 1 minute Fast Data Transfer: Up to 480 Gbps; • External media such as Blu-Ray drives 10 times faster than USB 2.0 devices MECHANICAL CHARACTERISTICS: • High-definition video content and 200 times faster than serial ports. Operating Temperature: -13°F (-25°C) to +176°F(+80°C) • Multi-gigabyte mobile phones Durability: 1500 Cycles min. • Portable media players USB TYPE A SOCKETS/PLUGS THRU-HOLE MOUNT SOCKET CABLE PLUG .515 [13.1] • Supplied unassembled .579 [14.7] .650 [16.5] 1.575 [40.00] .276 [7.0] REF. .287 [7.3] .118 [3.0] Mounting Detail .466 [11.8] .614 [15.6] .517 [13.1] .090 [2.3] DIA. (2) PLS .472 [12.00] .177 [4.50] SOCKET SPECIFICATIONS: .059 [1.5] PLUG SPECIFICATIONS: Shell: Steel, Nickel Plated Shell: Steel, Nickel Plated Insulator: Thermoplastic, UL Rated 94V-0 Insulator: Thermoplastic, UL Rated 94V-0 .079 [2.0] TYP. Contacts: Phosphor Bronze, Gold Flash Contacts: Phosphor Bronze, Gold Flash over Nickel over Nickel .027 [0.7] DIA .079 [2.0] (9) PLS .276 [7.0] CAT. NO. 945 .078 [2.00] CAT. NO. 947 MICRO-USB TYPE B SOCKETS/PLUGS SURFACE MOUNT SOCKET CABLE PLUG .506 [12.8] .197 [5.0] .085 [2.2] .532 [13.5] .024 [0.6] .187 [4.8] • Supplied unassembled .526 [13.4] .116 [3.0] .098 [2.5] .920 [23.4] .537 [13.6] Mounting Detail .026 [0.6] TYP. .053 [1.3] .016 [0.40] (5) PLS SOCKET SPECIFICATIONS: PLUG SPECIFICATIONS: .190 [4.8] .075 [1.9] SQR Shell: Steel, Nickel Plated Shell: Steel, Nickel Plated TYP. .132 [3.4] Insulator: Thermoplastic, UL Rated 94V-0 Insulator: Thermoplastic, UL Rated 94V-0 PCB EDGE Contacts: Phosphor Bronze, Gold Flash Contacts: Phosphor Bronze, Gold Flash over Nickel over Nickel .057 [1.4] .264 [6.7] .193 [4.9] CAT. NO. 955 .403 [10.2] CAT. NO. 957 USB TYPE B SOCKETS/PLUGS THRU-HOLE MOUNT SOCKET CABLE PLUG .724 [18.4] .472 [12.0] .508 [12.9] • Supplied unassembled 1.400 [36.0] .115 [2.9] REF. .406 [10.3] .553 [14.0] Mounting Detail .335 [8.5] SOCKET SPECIFICATIONS: .197 [5.0] .315 Shell: Phosphor Bronze, Nickel Plated .411 [10.4] .028 [0.7] DIA (5) PLS. .098 [2.5] [8.0] Insulator: Thermoplastic, UL Rated 94V-0 .157 [4.0] Contacts: Phosphor Bronze, Gold Flash PLUG SPECIFICATIONS: over Nickel .079 [2.0] Shell: Steel, Nickel Plated .105 [2.7] Contact Area: Gold Flash over Nickel Insulator: Thermoplastic, UL Rated 94V-0 Solder Tails: Tin over Nickel Contacts: Phosphor Bronze, Gold Flash over Nickel .036 [0.9] DIA. (4) PLS. .091 [2.3] DIA. .474 [12.0] CAT. NO. 950 (2) PLS. CAT. NO. 952 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 96 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED USB 3.0 PLUGS & SOCKETS FIREWIRE PLUGS & SOCKETS SUPER SPEED SERIAL BUS - FIREWIRE SOCKETS FEATURES •Snap-In PC tails hold connector in position for soldering • Gold Plated contacts for low contact resistance and excellent reliability IEEE 1394 DESIGN ADVANTAGES ELECTRICAL CHARACTERISTICS Superfast Data Transfer: Rated Voltage: 30VAC (RMS) Current speeds of 100Mbps, 200Mbps and 400Mbps, and Contact Current Rating: 1 Amp DC max. roadmapped to 1GB to 3.2 GBps per second Contact Resistance: 15 m Daisy Chaining: Insulation Resistance: 1000 m
min. Up to to 63 devices, each one acts as an active repeater on Dielectric Withstanding Voltage: 750V AC for 1 minute the bus, with a maximum of 16 repeats Operating Temperature: 32°F (0°C) to +104°F (40°C) Port Expansion: Capacitance: 2pF max. Alleviates restriction of limited COM Ports and available IRQ’s Wide Bandwidth: MECHANICAL CHARACTERISTICS Operates in asynchronous or isochronous data streams. Durability: >1500 cycles Digital interface designed for high speed applications for PC Mating Force: 35 Newtons min. peripherals, consumer electronics and communications. Withdrawal Force: 10 Newtons min. Simple Connections: True Plug and Play, no jumpers, DIP Switches or IRQ’s to set DEVICE APPLICATIONS Hot Swapping: ■ Broadcast TV Allows peripherals to be connected or disconnected without SPECIFICATIONS ■ Cable TV turning off computer Shell: Phosphor Bronze ■ Digital Camcorders Highly Versatile Bus: Insulator: Thermoplastic, Rated UL 94V-0 ■ Digital Cameras & VCRs One bus can handle a variety of devices operating at different Contacts: Phosphor Bronze ■ Computers & Hard Disks speed classes for true backwards compatibility Plating: ■ DVD Players Standard Digital Interface: Contact Area: Gold Flash over Nickel ■ Printers & Monitors Allows consumer electronics and computer devices to Solder Tails: Tin over Nickel Plate ■ Stereos communicate together on one interface SURFACE MOUNT THRU HOLE MOUNT THRU HOLE MOUNT HORIZONTAL UP-RIGHT HORIZONTAL SUPPLIED ON TAPE AND REEL .532 [13.5] POS. 2 .713 [18.1] POS. 1 .654 [16.6] .532 [13.5] POS. 6 .571 [14.5] POS. 2 POS. 6 POS. 2 .532 .327 .327 [13.5] [8.3] [8.3] POS. 6 .059 [1.5] POS. 1 POS. 5 .079 [2.0] POS. 1 POS. 5 .079 POS. 5 .079 [2.0] [2.0] .183 .262 .183 [4.7] [4.7] [6.7] Mounting Detail Mounting Detail Mounting Detail .394 [10.0] .031 [0.80] DIA. (8) PLS .394 [10.0] .118 [3.0] .063 [1.60] DIA. (2) PLS .031 [0.80] DIA. .039 [1.0] .020 [0.5] (6) PLS .032 [0.8] .008 [0.2] .028 [0.7] .079 [2.0] TYP. .079 [2.0] (3) PLS X .087 [2.2] 1 2 .262 [6.7] .183 .183 .414 1 3 5 1 2 3 4 5 6 3 4 [4.7] [4.7] .333 [10.5] .333 2 4 6 .079 [2.0] .098 [2.5] 5 6 .098 [2.5] [8.5] [8.5] .039 [1.0] .039 [1.0] .039 [1.0] PCB EDGE PCB EDGE .284 [7.2] PCB EDGE .461 [11.7] .461 [11.7] ( ) CAT. NO. 927 Bulk ( ) CAT. NO. 927TR Tape & Reel Tape & Reel Spec’s: 32mm wide; 24mm CAT. NO. 930 CAT. NO. 929 pitch; 13 inch reel (200 pieces per reel) FIREWIRE PLUG FEATURES • Modular design allows easy and fast assembly of components • Integrated strain relief - crimps to wire insulation • Gold Plated contacts for low contact resistance and excellent reliability IEEE 1394 SPECIFICATIONS Shell: Phosphor Bronze 1.240 [31.5] Insulator: Thermoplastic, Rated UL 94V-0 Contacts: Phosphor Bronze Plating: Contact Area: Gold Flash over Nickel Solder Tails: Tin over Nickel Plate ELECTRICAL CHARACTERISTICS Contact Resistance: 30m
max. Insulation Resistance: 1000 m
min. .210 [5.3] Withstanding Voltage: 500V ± 50V DC Operating Temperature: 32°F (0°C) to +104°F (40°C) CAT. NO. 928 (Supplied Unassembled) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 97 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED MICRO JACKS • Space saving design for high SPECIFICATIONS density packaging Body: Brass, ASTM-B16 Plating: • Beryllium Copper multi-spring Spring: Beryllium Copper Gold: .000010 per MIL-G-45204 contact maintains retention after (QQ-C-533) (RoHS Compliant) RoHS multiple insertions Tin/Lead: .000200 to .000300 • Ideal for mounting transistors, re- sistors, diodes, IC’s and similar per MIL-T-10727, Type 1 miniature components (Non-RoHS Compliant) RoHS • Custom micro jacks manufactured PLATING OPTIONS to your specifications CONTACT • Other platings available PLATING BODY SPRING RoHS upon request Gold/Gold Gold Gold Compliant Tin/Tin Tin/Lead Tin/Lead Non-Compliant Tin/Gold Tin/Lead Gold .015 (.38 ) - .021 (.53) PIN - SOLDER MOUNT .015 (.38) - .021 (.53) PIN - PRESS FIT .015 (.38) - .025 (.64) PIN - TAPER-FIT .055 [1.40] .055 [1.40] .072 [1.9] .016 [0.41] .016 [0.41] 4-FINGER CLOSED 3-FINGER CLOSED 3-FINGER CLOSED .020 [0.50] ENTRY CONTACT ENTRY CONTACT ENTRY CONTACT .038 .083 [2.11] .083 [2.11] .095 [2.4] [0.96] .130 [3.3] HEX. L L L .056 [1.42] .038 [0.96] .038 [0.96] .045 [1.14] RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. GOLD/GOLD TIN/TIN TIN/GOLD L Hole RoHS NON-RoHS Mtg. GOLD/GOLD TIN/TIN TIN/GOLD L Hole CAT. NO. CAT. NO. CAT. NO. Length Dia. GOLD/GOLD TIN/TIN TIN/GOLD L Hole CAT. NO. CAT. NO. CAT. NO. Length Dia. 1412-1 1432-1 1468-1 .140 (3.6) CAT. NO. CAT. NO. CAT. NO. Length Dia. .040 1411-1 1431-1 1420-1 .140 (3.6) .042 1412-2 1432-2 1468-2 .170 (4.3) 1415-1 1435-1 1469-1 .160 (4.1) .055 (1.02) 1411-2 1431-2 1420-2 .170 (4.3) (1.07) 1415-2 1435-2 1469-2 .190 (4.8) (1.40) 1412-3 1432-3 1468-3 .282 (7.2) .015 (.38) - .025 (.64) PIN - SOLDER MOUNT .015 (.38) - .025 (.64) PIN - SOLDER MOUNT .022 (.56 ) - .032 (.81) PIN - SOLDER MOUNT 4-FINGER CLOSED .063 [1.60] ENTRY CONTACT .041 [1.04] .072 [1.83] 4-FINGER CLOSED .077 [2.0] DIA. ENTRY CONTACT .014 [0.4] 4-FINGER CLOSED .016 [0.41] ENTRY CONTACT .089 [2.23] .120 [3.1] .205 .093 [2.36] .248 .142 [3.6] [5.2] .233 [5.9] .161 [4.1] [6.3] .259 [6.6] .055 [1.39] .049 [1.24] .060 [1.52] DIA. RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. 1413 1433 1470 .059 (1.50) 1603 1606 1607 .052 (1.32) 1693 1694 1695 .063 (1.60) .022 (.56) - .034 (.86) PIN - PRESS FIT .022 (.56) - .034 (.86) PIN - SOLDER MOUNT .025 (.64) - .037 (.94) PIN - SOLDER MOUNT .086 [2.2] .077 [1.96] .080 [2.03] .015 [0.38] 6-FINGER CLOSED 6-FINGER CLOSED .025 [0.7] 6-FINGER CLOSED .028 [0.71] ENTRY CONTACT .045 [1.14] ENTRY CONTACT ENTRY CONTACT .091 [2.3] .083 [2.11] .170 L .090 [2.29] .083 [2.11] .200 [4.3] [5.1] .070 [1.78] .057 [1.45] KNURL .062 [1.57] .061 [1.55] RoHS NON-RoHS Mtg. GOLD/GOLD TIN/TIN TIN/GOLD L Hole RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. CAT. NO. CAT. NO. CAT. NO. Length Dia. GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole 1626-1 1614-1 1619-1 .095 (2.4) .062 CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. 1626-2 1614-2 1619-2 .105 (2.7) (1.57) 1658 1659 1673 .065 (1.65) 1416 1436 1471 .067 (1.70) 1626-3 1614-3 1619-3 .155 (3.9) .025 (.64) - .037 (.94) PIN - SOLDER MOUNT .025 (.64) - .037 (.94) PIN - PRESS FIT .032 (.81) - .046 (1.17) PIN - SWAGE MOUNT 6-FINGER CLOSED ENTRY CONTACT .092 [2.34] 4-FINGER CLOSED 6-FINGER CLOSED .040 [1.02] ENTRY CONTACT .078 [1.98] ENTRY CONTACT .078 [1.98] DIA. .020 [0.52] .128 [3.3] .168 .090 [2.29] .200 [4.3] .230 [5.1] .180 [4.6] [5.9] .210 [5.3] .165 [4.2] .057 [1.45] HEX .200 [5.1] L .125 [3.2] .062 [1.57] .187 [4.7] .040 [1.02] .057 [1.45] DIA. .065 [1.65] .040 [1.02] RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. GOLD/GOLD TIN/TIN TIN/GOLD L Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT. NO. CAT. NO. CAT. NO. Length Dia. CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. 1419-1 1439-1 1478-1 .062 (1.6) .069 3590 3591 3592 .065 (1.65) 1697 1698 1699 .063 (1.60) (1.75) 1419-2 1439-2 1478-2 .094 (2.4) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 98 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED MICRO JACKS MICRO JACKS MICRO JACKS .032 (.81 ) - .046 (1.17) PIN - PRESS-FIT .032 (.81 ) - .046 (1.17) PIN - PRESS-FIT .032 (.81) - .046 (1.17) PIN - SOLDER MOUNT .093 [2.36] .091 [2.3] .091 [2.32] .103 [2.6] 4-FINGER CLOSED 4-FINGER CLOSED .030 [0.77] .018 [0.47] 4-FINGER CLOSED .018 [0.47] ENTRY CONTACT ENTRY CONTACT ENTRY CONTACT .080 .130 [3.3] .130 [2.1] .120 [3.1] .180 .180 [3.3] .206 .195 .206 [4.6] .220 [4.6] [5.3] [5.0] [5.3] [5.6] .071 [1.80] .082 [2.09] HEX. KNURL .073 [1.9] .071 [1.80] .072 [1.83] RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. 1417 1437 1479 .076 (1.93) 1443 1446 1473 .078 (1.98) 1442 1445 1486 .076 (1.93) .032 (.81) - .046 (1.17) PIN - SOLDER MOUNT .032 (.81) - .046 (1.17) PIN - SOLDER MOUNT .032 (.81) - .046 (1.17) PIN - SOLDER MOUNT 4-FINGER CLOSED .091 [2.3] .126 [3.2] ENTRY CONTACT .090 [2.29] 4-FINGER CLOSED ENTRY CONTACT 4-FINGER CLOSED .020 [0.51] ENTRY CONTACT .124 [3.2] .192 [4.9] .220 [5.6] .018 .123 [3.1] .130 [3.3] .195 [0.45] .032 [0.8] .221 .236 [5.0] [5.6] [6.0] .015 [0.37] REF. .125 [3.2] KNOCK OUT PLUG .084 [2.13] DIA. .085 [2.2] .072 [1.83] RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. 1441 1444 1488 .076 (1.93) 1674 1675 1676 .087 (2.21) 1677 1678 1679 .089 (2.26) .032 (.81) - .046 (1.17) PIN - SOLDER MOUNT .040 (1.02) - .050 (1.27) PIN - SOLDER MOUNT .048 (1.22) - .064 (1.63) PIN - SOLDER MOUNT .118 [3.0] .120 [3.1] .126 [3.2] 4-FINGER CLOSED 6-FINGER CLOSED .016 [0.41] 4-FINGER CLOSED ENTRY CONTACT ENTRY CONTACT .018 [0.46] .036 [0.93] ENTRY CONTACT .096 [2.5] .130 [3.3] .140 [3.6] .180 .020 .260 .213 [4.6] .236 [0.50] .290 [6.6] [5.4] [6.0] [7.4] .084 [2.14] .098 [2.5] .063 [1.60] .100 [2.6] RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. 1418 1438 1497 .104 (2.6) 1414 1434 1496 .089 (2.26) 1682 1683 1684 .102 (2.6) .065 (1.65) - .082 (2.08) PIN - SOLDER MOUNT .065 (1.65) - .082 (2.08) PIN - SOLDER MOUNT .084 (2.13) - .102 (2.6) PIN - PRESS-FIT .187 [4.8] .143 [3.7] .143 [3.7] .053 [1.34] 4-FINGER CLOSED 4-FINGER CLOSED ENTRY CONTACT .100 [2.6] .170 [4.3] ENTRY CONTACT .025 [0.64] 6-FINGER CLOSED .070 [1.78] ENTRY CONTACT .157 [4.0] .157 [4.0] .340 .125 .122 [3.1] .357 [8.7] [3.2] .400 .412 .165 [4.2] [9.1] [10.5] [10.2] .118 [3.0] .140 [3.6] KNURL .142 [3.6] RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. RoHS NON-RoHS Mtg. GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. CAT. NO. Dia. 1641A 1641B 1641C .122 (3.1) 1687 1688 1689 .146 (3.7) 1640A 1640B 1640C .138 (3.5) .032 (.81) - .046 (1.17) PIN - CRIMP BARREL JACK IC SOCKET CONTACTS FOR .015 (.38) – .025 (.64) LEADS – PRESS-FIT 4-FINGER CLOSED .072 [1.83] ENTRY CONTACT 4-FINGER CLOSED .031 [0.80] .072 [1.83] ENTRY CONTACT 4-FINGER CLOSED .031 [0.80] .200 .224 ENTRY CONTACT .090 [2.3] DIA [5.1] [5.7] .060 .101 [2.6] .160 [1.52] .193 [4.1] .060 .101 [2.6] [4.9] .160 [1.52] .203 [4.1] .031 [0.8] [5.2] .053 [1.35] .306 .077 [2.0] [7.8] .053 [1.35] L .075 [1.9] .025 [0.63] SQUARE .086 [2.2] DIA. .105 [2.7] DIA RoHS NON-RoHS Mtg. RoHS NON-RoHS GOLD/GOLD TIN/TIN TIN/GOLD L Hole RoHS NON-RoHS Mtg. GOLD/GOLD TIN/TIN TIN/GOLD CAT. NO. CAT. NO. CAT. NO. Length Dia. GOLD/GOLD TIN/TIN TIN/GOLD Hole CAT. NO. CAT. NO. CAT. NO. CAT. NO. CAT. NO. CAT. NO. Dia. 3501 3505 3504 .360 (9.2) .057 3503 3507 3509 .057 (1.45) 3593 3594 3595 3502 3506 3508 .510 (13.0) (1.45) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 99 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED MICRO PINS • Precision engineered and manufactured • Space saving design for high density packaging • Micro pins are available in .017 (.43) to .080 (2.03) diameters • Ideal for mating with our standard line of micro jacks • Available for press-fit, swage or solder mounting • Custom micro pins manufactured to your specifications • Other platings available upon request SPECIFICATIONS DASH NUMBERS (L Dimension) Material: Brass, ASTM-B16 -1 for .032 (.81) thick Board Plating: -2 for .062 (1.57) thick Board Gold: .000010 per MIL-G-45204 -3 for .093 (2.36) thick Board Tin: .000200 to .000300 per -4 for .125 (3.2) thick Board MIL-T-10727, Type 1 Example: 1967-1 for .032 (.81) thick Board (RoHS Compliant) RoHS 1967-2 for .062 (1.57) thick Board .017 (.43) PIN -SWAGE MOUNT .017 (.43) PIN - SOLDER MOUNT .018 (.46) PIN - PRESS-FIT .018 (.46) PIN- PRESS-FIT .018 [0.46] .017 [0.43] .018 [0.46] .017 [0.43] .045 [1.14] .180 [4.6] .078 [1.98] .020 [0.51] .028 [0.71] .145 [3.7] .186 [4.7] KNURL .030 [0.76] .173 [4.4] .039 [0.99] .020 [0.51] .045 [1.14] .080 [2.03] .061 [1.55] L .028 [0.71] .016 [0.41] KNURL .019 [0.48] .032 [0.81] .049 [1.24] MATERIAL: Phosphor Bronze GOLD TIN L Mtg. Hole CAT. NO. CAT. NO. Length Dia. GOLD TIN Mtg. Hole GOLD TIN Mtg. Hole GOLD TIN Mtg. Hole 1967-1 1968-1 .051 (1.3) .052 CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. Dia. 1967-2 1968-2 .082 (2.0) (1.32) 1378-1 1379-1 .022 (.56) 1986-1 1987-1 .026 (.66) 1990-2 1991-2 .026 (.66) .018 (.46) PIN - PRESS-FIT .018 (.46) PIN - PRESS-FIT .020 (.51) PIN - PRESS-FIT .020 (.51) PIN - SOLDER MOUNT .020 [0.51] .020 [0.51] .018 [0.46] .125 [3.2] .018 [0.46] .045 [1.14] A .056 [1.42] .020 [0.51] A .295 [7.5] .155 [4.0] .030 [0.76] .038 [0.97] .016 [0.41] .100 [2.6] .049 [1.24] .060 [1.52] .060 [1.52] .029 [0.72] .020 [0.51] .019 [0.48] .055 [1.40] PENTAGON SQUARE GOLD TIN A Mtg. Hole GOLD TIN A Mtg. Hole GOLD TIN Mtg. Hole CAT. NO. CAT. NO. Dim. Dia. GOLD TIN Mtg. Hole CAT. NO. CAT. NO. Dim. Dia. CAT. NO. CAT. NO. Dia. 1992-2 1994-2 .243 (6.2) .022 CAT. NO. CAT. NO. Dia. 1998-3 2000-3 .250 (6.4) .024 1988-2 1989-2 .026 (.66) 1993-2 1995-2 .140 (3.6) (.56) 1996-2 1997-2 .040 (1.01) 1999-3 2001-3 .425 (10.8) (.61) .020 (.51) PIN - SWAGE MOUNT .025 (.64) PIN - SWAGE MOUNT .020 (.51) PIN - SWAGE MOUNT .024 (.61) PIN - SWAGE MOUNT .025 [0.64] .024 [0.61] .020 [0.51] .020 [0.51] .060 [1.52] .078 [1.98] .050 [1.27] .213 [5.4] .050 [1.27] .010 [0.25] .025 [0.64] .156 [4.0] .030 [0.76] .225 [5.7] .010 [0.25] .050 [1.27] L L L .051 [1.30] .027 [0.68] .030 [0.76] .031 [0.79] .058 [1.47] GOLD TIN L Mtg. Hole GOLD TIN L Mtg. Hole GOLD TIN L Mtg. Hole CAT. NO. CAT. NO. Length Dia. CAT. NO. CAT. NO. Length Dia. GOLD TIN Mtg. Hole CAT. NO. CAT. NO. Length Dia. 1406-1 1426-1 .047 (1.2) .035 1408-1 1428-1 .062 (1.6) .062 CAT. NO. CAT. NO. Dia. 1372-1 1373-1 .051 (1.3) .031 1406-2 1426-2 .078 (1.9) (.89) 1408-2 1428-2 .094 (2.4) (1.57) 1366-1 1367-1 .035 (.89) 1372-2 1373-2 .082 (2.1) (.78) .025 (.64) PIN - SWAGE MOUNT .025 (.64) PIN - SWAGE MOUNT .025 (.64) PIN - SWAGE MOUNT .025 (.64) PIN - SWAGE MOUNT .025 [0.64] .025 [0.64] .025 [0.64] .025 [0.64] .062 [1.57] .062 [1.57] .062 [1.57] .150 [3.8] .025 [0.64] .021 [0.53] .062 [1.57] .200 [5.1] .250 [6.4] .021 [0.53] .100 [2.6] .025 [0.64] L L L .065 [1.64] .040 [1.02] .047 [1.19] .047 [1.19] .040 [1.02] GOLD TIN L Mtg. Hole GOLD TIN L Mtg. Hole GOLD TIN L Mtg. Hole CAT. NO. CAT. NO. Length Dia. CAT. NO. CAT. NO. Length Dia. CAT. NO. CAT. NO. Length Dia. GOLD TIN Mtg. Hole 1368-1 1369-1 .051 (1.3) .043 1404-1 1424-1 .051 (1.3) .052 1407-1 1427-1 .051 (1.3) .052 CAT. NO. CAT. NO. Dia. 1368-2 1369-2 .082 (2.1) (1.09) 1404-2 1424-2 .082 (2.1) (1.32) 1407-2 1427-2 .082 (2.1) (1.32) 1368-3 1369-3 .113 (2.9) 1401-1 1421-1 .043 (1.09) ® T Te el (718) 956-8900 l (718) 956-8900 •• F Fa ax (718) 956-9040 x (718) 956-9040 www.keyelco.com 100 (800) 221-5510 (800) 221-5510 •• kec@ke kec@keyelco.com yelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED MICRO PINS MICRO PINS MICRO PINS .025 (.64) PIN - SWAGE MOUNT .030 (.76) PIN - SWAGE MOUNT .031 (.79) PIN- SOLDER MOUNT .032 (.81) PIN- SWAGE MOUNT .032 [0.81] .030 [0.76] .050 [1.27] .250 [6.4] .025 [0.64] .094 [2.39] .031 [0.79] .342 [8.7] .320 [8.2] .062 [1.57] .078 [1.98] .020 [0.5] .437 [11.1] .070 [1.78] .187 [4.8] .030 [0.76] .020 [0.51] .062 [1.57] L L .094 [2.39] .062 [1.57] .050 [1.27] .028 [0.71] .047 [1.19] .040 [1.02] GOLD TIN L Mtg. Hole GOLD TIN L Mtg. Hole CAT. NO. CAT. NO. Length Dia. CAT. NO. CAT. NO. Length Dia. GOLD TIN Mtg. Hole 1374-1 1375-1 .051 (1.3) GOLD TIN Mtg. Hole .067 1354-1 1355-1 .051 (1.3) .052 CAT. NO. CAT. NO. Dia. 1374-2 1375-2 .082 (2.1) CAT. NO. CAT. NO. Dia. (1.70) (1.32) 1370-2 1371-2 .052 (1.32) 1374-3 1375-3 .113 (2.9) 1352-1 1353-1 .043 (1.09) 1354-2 1355-2 .082 (2.1) .035 (.90) PIN- SWAGE MOUNT .040 (1.0) PIN - SWAGE MOUNT .040 (1.0) PIN - SWAGE MOUNT .040 (1.0) PIN - SWAGE MOUNT .040 [1.02] .040 [1.02] .035 [0.90] DIA. .094 [2.39] .070 [1.78] .172 [4.4] .040 [1.02] .022 [0.56] .320 [8.2] .030 [0.75] .130 [3.30] .070 [1.78] .020 [0.51] .400 [10.2] L .020 [0.51] .062 [1.55] .072 [1.83] .125 [3.2] .040 [1.02] L L .050 [1.27] .040 [1.02] .058 [1.45] .020 [0.51] .040 [1.02] GOLD TIN L Mtg. Hole GOLD TIN L Mtg. Hole CAT. NO. CAT. NO. Length Dia. GOLD TIN L Mtg. Hole CAT. NO. CAT. NO. Length Dia. GOLD TIN Mtg. Hole 1356-1 1357-1 .051 (1.3) CAT. NO. CAT. NO. Length Dia. 1405-1 1425-1 .051 (1.3) .076 .043 CAT. NO. CAT. NO. Dia. 1356-2 1357-2 .082 (2.1) 1358-1 1359-1 .051 (1.3) .043 1405-2 1425-2 .082 (2.1) (1.93) (1.09) 1380-1 1381-1 .062 (1.57) 1358-2 1359-2 .082 (2.1) (1.09) 1356-3 1357-3 .113 (2.9) 1405-3 1425-3 .113 (2.9) .050 (1.3) PIN - SWAGE MOUNT .040 (1.0) PIN - SWAGE MOUNT .040 (1.0) KAY PIN - PRESS-FIT .040 (1.0) HOLLOW PIN - SWAGE MOUNT .040 [1.02] .250 .115 .050 [1.27] .052 [1.32] .040 [1.02] [6.4] [2.9] .080 [2.03] .094 [2.39] .093 [2.36] .270 [6.9] .193 .031 [0.79] .047 [1.19] .250 [6.4] .075 [1.91] .832 .458 [4.9] KNURL .030 [0.76] [21.2] [11.7] .040 [1.02] .312 [7.9] .040 [1.02] .094 [2.39] .125 [3.2] .060 [1.52] .058 [1.47] MATERIAL: GOLD TIN Mtg. Hole TIN Mtg. Hole GOLD TIN Mtg. Hole Solid Nickel Silver CAT. NO. CAT. NO. Dia. CAT. NO. Dia. CAT. NO. CAT. NO. Dia. Mtg. Hole 1402-3 1422-3 .062 (1.57) CAT. NO. 1218 1219 .059 (1.50) 1360-2 1361-2 .064 (1.63) .043 (1.09) Dia. .063 (1.6) PIN - SWAGE MOUNT .080 (2.0) PIN - SWAGE MOUNT .080 (2.0) PIN - SWAGE MOUNT .080 (2.0) PIN - SWAGE MOUNT .080 [2.03] .080 [2.03] B .063 [1.60] A .080 [2.03] .125 [3.2] .025 [0.64] .093 [2.36] .300 [7.6] .156 [4.0] .457 [11.6] .530 [13.5] .030 [0.76] .057 [1.45] L .042 [1.07] .194 [5.0] .098 [2.5] .105 [2.7] .082 [2.08] .090 [2.29] GOLD TIN A B L .063 [1.60] .090 [2.29] .090 [2.29] CAT. NO. CAT. NO. Dim. Dia. Length 1447-1 1455-1 .335 (8.5) .156 (4.0) .051 (1.3) GOLD TIN Mtg. Hole GOLD TIN Mtg. Hole GOLD TIN Mtg. Hole 1447-2 1455-2 .400 (10.2) .125 (3.2) .094 (2.4) CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. Dia. CAT. NO. CAT. NO. Dia. 1447-3 1455-3 .400 (10.2) .125 (3.2) .125 (3.2) 1447-4 1455-4 .400 (10.2) .125 (3.2) .156 (4.0) 1362-2 1363-2 .067 (1.70) 1376-2 1377-2 .094 (2.38) 1364-2 1365-2 .094 (2.38) INSULATED SHORTING JACK INSULATED SHORTING PLUG .040 (1.0) PINS SHORTING PIN W .062 [1.57] .120 [3.1] W .062 [1.57] DIA. .120 [3.1] DIA. .500 [12.7] .040 [1.0] .261 [6.7] DIA WIRE .500 [12.7] .181 [4.6] .125 [3.2] A A .125 [3.2] A .040 [1.02] • For .040 (1.0) Pins BLUE RED BLACK A W MATERIAL: Non-insulated A CAT. NO. CAT. NO. CAT. NO. Dim. Dim. Insulator: CAT. NO. Dim. 1460L 1460R 1460B .200 (5.1) .375 (9.5) Polypropylene MATERIAL: 1430-1 .200 (5.1) BLUE RED BLACK A W 1461L 1461R 1461B .250 (6.4) .375 (9.5) Dim. Dim. Blue, Red or Black Insulator: Polypropylene 1430-2 .250 (6.4) CAT. NO. CAT. NO. CAT. NO. MATERIAL: 1462L 1462R 1462B .400 (10.2) .620 (15.7) 1487L 1487R 1487B .200 (5.1) .375 (9.5) Spring: Beryllium Blue, Red or Black 1430-4 .400 (10.2) Pin: Brass, 1463L 1463R 1463B .500 (12.7) .620 (15.7) 1400L 1400R 1400B .400 (10.2) .620 (15.7) Copper, Gold Plate Pin: Brass, Gold Plate 1430-5 .500 (12.7) Gold Plate ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 101 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PHONO PLUGS • Mates with .125 (3.2) diameter jacks STRAIN RELIEF LUG CRIMPS TO WIRE INSULATION CONVENTIONAL TYPE CRIMP OR SOLDER TYPE EXTRA LONG HANDLE .175 [4.5] DIA. .156 [4.0] DIA. .312 .130 [3.3] .500 [7.9] DIA. [12.7] 1.300 MAX. .500 [33.0] .500 .750 1.062 [12.7] MAX. .562 [19.1] [12.7] [27.0] MAX. MAX. [14.3] .562 .562 [14.3] [14.3] .125 [3.2] DIA. .125 [3.2] DIA. .125 [3.2] DIA. MATERIAL: MATERIAL: MATERIAL: Shell: Steel, Tin Plate Shell: Brass, Nickel Plate Shell: Steel, Tin Plate CAT. NO. 565 CAT. NO. 561 CAT. NO. 567 Pin: Brass, Nickel Plate Pin: Brass, Nickel Plate Pin: Brass, Nickel Plate “F” FEMALE CONNECTOR PANEL MOUNT PHONO JACKS • Mates with .125 (3.12) dia. pin • Color coded for ease of identification SNAP-FIT PC MOUNT • Mounts to panel in .296 (7.6) dia. hole • Complete with nut and solder lug • Low profile ROUND BASE HEX BASE • Snap-fit mounting for positive retention during wave soldering • Rugged, stable construction facilitates reliable mating • High reliability, manufactured using Nickel Plated Brass bodies and Tin Plated Phosphor Bronze contacts • Supplied with washer and nut .437 .936 [23.8] .437 [11.1] [11.1] .669 [17.0] .421 [10.7] .531 [13.5] .375 [9.5] .425 [10.8] HEX. DIA. .062 [1.57] .062 [1.57] .469 .375 [9.6] DIA. DIA. [11.9] .260 DIA. [6.6] .328 [8.4] .328 [8.4] DIA. .157 [4.0] DIA. .375-32 THREAD .350 [8.9] .350 [8.9] .039 [.99] .169 [4.3] .098 [2.5] .232 [5.9] .830 .830 .260 MAX. REF. [21.1] [21.1] .260 [6.6] .467 [6.6] (3) PLS [11.9] .250-32 .250-32 THREAD THREAD Mounting Detail MATERIAL: CAT. NO. INSULATOR COLOR CAT. NO. INSULATOR COLOR Shell: Steel, Tin Plate 598 WHITE 581 WHITE .400 [10.2] .105 [2.7] Body: Brass, Nickel Plate 580 RED 582 RED DIA. Contacts: Brass, Tin Plate (3) PLS .200 [5.1] 574 BLACK 576 BLACK MATERIAL: .062 [1.57] DIA. 599 YELLOW CAT. NO. 911 583 YELLOW Brass, Nickel Plate COLOR KEYED - PC PHONO JACKS •Mates with .125 (3.2) diameter pins • Features a normally closed circuit SCHEMATIC •Various colors for circuit identification • Snap-fit mounting for positive retention during wave soldering .394 [10.0] TO ACCEPT 1 .354 [9.0] .551 [14.0] .125 [3.2] PIN 4 3 .327 .512 [13.0] [8.3] .256 [6.5] .413 [10.5] 3 .453 4 .157 [4.0] Mounting Detail [11.5] .075 [1.91] 1 .315 [8.0] .386 .209 [5.3] .098 [2.5] [9.8] (TOP VIEW) .295 [7.5] .315 [8.0] .082 [2.08] DIA. .256 [6.5] CAT. INSULATOR (3) PLS SPECIFICATIONS .157 [4.0] NO. COLOR Housing: PBT 970 WHITE .295 [7.5] 1 Ground Terminal: .020 (.51) Brass, Nickel Plate ➀ 3 971 RED .209 [5.3] Spring Contact: .012 (.30) Phosphor Bronze, 4 972 BLACK .078 [1.98] DIA. Silver Plate ➂ (2) PLS .090 [2.29] DIA. 973 YELLOW Shunt Terminal: .016 (.41) thick Brass, Silver Plate ➃ ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 102 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PHONO JACKS & PLUGS PC PHONO JACKS 90° PC PHONO JACK SNAP-FIT 90° PC PHONO JACKS CHOICE OF TIN OR GOLD PLATE Complete one piece jack for insertion into PC board. Time Saving. No Wiring Required. Complete one piece jack for insertion into PC board. Time Saving. No Wiring Required. Snap-fits into PC board. .598 [15.2] REF. • Black insulator ring. .571 [14.5] .570 [14.5] .560 [14.2] .265 [6.8] .415 [10.6] .218 [5.6] REF. .328 [8.4] .570 DIA. [14.5] .320 .328 [8.4] [8.2] .465 [11.8] DIA. .257 [6.6] .160 [4.1] .120 [3.1] .100 [2.6] MATERIAL: .050 [1.27] (2) PLS Shell: Steel .050 [1.27] .100 [2.6] .378 [9.6] (3) PLS Contact: Brass .878 .255 [6.5] .465 [11.8] Plating: Tin or Gold [22.3] TIN PLATE INSULATOR GOLD PLATE Mounting Detail Mounting Detail MATERIAL: CAT. NO. COLOR CAT. NO. .400 [10.2] Base: Steel, Tin Plate .060 [1.52] DIA. 587 WHITE 936 .105 [2.7] Shell: Steel, Nickel Plate .107 [2.7] DIA. .285 588 RED 937 DIA. (3) PLS Contact: Brass, Tin Plate [7.3] (2) PLS .200 [5.1] 901 BLACK 900 .062 [1.57] DIA. .546 [13.9] 589 YELLOW 938 CAT. NO. 902 SNAP-FIT VERTICAL PC JACK SNAP-FIT VERTICAL PC PHONO JACKS • Snaps into holes on PC board and firmly held for soldering • Extra long, one piece shell to accept plugs with longer pins for greater contact • No staking required • Snaps into holes on PC board and firmly held for soldering • No staking required .328 [8.4] DIA. .328 [8.4] DIA. .297 [7.6] .655 [16.7] .414 [10.6] .843 [21.4] .875 [22.2] .162 [4.1] .261 [6.6] .390 [9.9] .410 [10.4] .096 [2.44] .050 [1.27] .070 [1.78] • Red insulator ring .062 [1.6] (2) PLS .400 [10.2] Mounting Detail Mounting Detail .420 CAT. INSULATOR .420 [10.7] [10.7] NO. COLOR .130 [3.3] .090 [2.29] MATERIAL: DIA. 584 WHITE DIA. Shell: Steel, Tin Plate 577 RED .070 .075 .085 [2.16] DIA. Contact: Brass, Tin Plate MATERIAL: [1.8] [1.90] .085 [2.2] 585 BLACK (2) PLS Shell: Steel, Nickel Plate DIA. (2) PLS 586 YELLOW CAT. NO. 572 Contact: Brass, Tin Plate PC PHONO JACKS VERTICAL HORIZONTAL • Mounted on bracket ready for insertion into pre-drilled holes • For applications requiring staking to product • Solder lug allows remote attachment of signal to PC board .656 [16.7] .328 [8.4] DIA. .438 MIN. [11.1] .312 [7.9] .328 [8.4] .554 [14.1] .656 [16.7] DIA. .656 .250 [16.7] [6.4] • White insulator ring • Red insulator ring .105 [2.7] .100 [2.6] .500 [12.7] .344 [8.8] (2) PLS .187 [4.8] (2) PLS Mounting Detail .500 [12.7] .045 [1.14] .250 [6.4] MATERIAL: MATERIAL: Mounting Detail Shell: Steel, Tin Plate Shell: Steel, Tin Plate .343 [8.7] Contact: Brass, Tin Plate Contact: Brass, Tin Plate .105 [2.7] .125 [3.2] .156 [4.0] DIA. DIA. (2) PLS CAT. NO. 573 CAT. NO. 571 ® 103 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED FULLY INSULATED DELUXE TIP JACK FULLY INSULATED STANDARD TIP JACK ACCEPTS .080 (2.0) TIP WITH CLOSED ENTRY CONTACT ACCEPTS .080 (2.0) TIP Economical tip jacks with molded Nylon body. Low contact resistance. Formed Phosphor Bronze Fully molded body with recessed closed entry design. Assures maximum retention with .010
max- contact with solder hole for ease in attaching wire. Current rating 10 Amps. Breakdown voltage imum contact resistance. Prevents accidental insertion of larger diameter probes. Current 5700 VRMS. Capacitance to metal panel 3.8 pF. Supplied with nut. rating: 10 Amps. Breakdown voltage 5700V RMS. Capacitance to metal panel 2.0 pF nominal. Sup- plied with nut. .188 [4.8] .844 [21.5] .375 [9.5] .188 [4.8] .750 [19.1] .562 [14.3] NUT .375 [9.5] .562 [14.3] NUT .375 [9.5] .375 [9.5] DIA. DIA. .250-32 .209 THREAD NUT .250-32 [5.3] .209 NUT THREAD [5.3] CAT. NO. COLOR CAT. NO. COLOR 6030 WHITE 6018 WHITE 6031 RED 6019 RED 6032 BLACK 6020 BLACK MATERIAL: 6033 GREEN 6021 GREEN Body: Molded Nylon ASTM D4066 MATERIAL: 6034 YELLOW 6022 YELLOW Contact: Beryllium Copper, Silver Plate Body: Molded Nylon ASTM D4066 6035 BLUE 6023 BLUE Terminal: Brass, Tin Plate Contact: Phosphor Bronze, Tin Plate METAL-CLAD TIP JACK (MIL) METAL-CLAD TIP JACK (STD) UNINSULATED TIP JACK ACCEPTS .080 (2.0) TIP WITH CLOSED ENTRY CONTACT ACCEPTS .080 (2.0) TIP ACCEPTS .080 (2.0) TIP High quality tip jack for high reliability industrial applications. Ideal for Molded Nylon body with metal jacket. Contact is formed from phos- Quality, precision machined tip jack made of brass. Ideal for use on use where required to withstand severe environmental conditions, tem- phor bronze contact with solder hole for ease in attaching wire. De- metal panels where grounding is required. Fits panels up to .375 (9.5) perature, vibration and salt spray. Recessed closed entry contact. Cur- signed for positive contact, easy insertion and withdrawal. Current Thick. Supplied with nut. rent rating 10 amps. Breakdown voltage: 5700V RMS. Made to rating: 10 Amps. Breakdown voltage 5700V RMS. Capacitance to MIL-C39024/10. Capacitance to metal panel 2.0 pF. Supplied com- metal panel 3.8 pF. Supplied with nut. plete with hardware. .156 [4.0] .812 [20.6] .632 [16.1] .312 [7.9] .906 [23.0] .812 [20.6] HEX. .395 .156 [4.0] .632 [16.1] .593 [15.1] [10.1] .312 [7.9] .375 [9.5] .395 [10.1] HEX. NUT .093 .281 [7.2] [2.4] DIA. .281 [7.2] .281 [7.2] DIA. DIA. .250-32 THREAD SPRING CONTACT TO .250-32 THREAD .343 [8.7] HEX. NUT ACCEPT .080 [2.03] NUT .250-32 THREAD .312 7.9] HEX. SPRING CONTACT TO DIA. PIN LOCKWASHER .375 [9.5] HEX. NUT ACCEPT .080 [2.03] DIA. PIN MATERIAL: MATERIAL: CAT. NO. COLOR CAT. NO. COLOR Body: Molded Nylon Body: Molded Nylon 6012 WHITE 6024 WHITE ASTM D4066 ASTM D4066 MATERIAL: 6013 RED 6025 RED Shell & Nut: Brass QQ-B-626, Shell: Brass, Nickel Plate Body: Brass, Nickel Plate 6014 BLACK 6026 BLACK Nickel Plate QQ-N-290 Contact: Phosphor Bronze, Contact: Beryllium Copper 6015 GREEN 6027 GREEN Contact: Beryllium Copper Silver Plate Current Rating: 15 Amps 6016 YELLOW 6028 YELLOW for QQ-C-533. Gold Plate CAT. NO. 6097 MIL-G-45204 6017 BLUE 6029 BLUE SOLDER TIP PLUGS SOLDERLESS TIP PLUGS STANDARD PHONE TIP .080 (2.0) DIAMETER TIP .080 (2.0) DIAMETER TIP .080 (2.0) DIAMETER TIP Accepts up to 12 gauge wire. Fits all standard Designed for miniaturization where space is criti- Fully insulated molded nylon sleeve. Maximum reli- tip jacks. cal. Solder lead connection. Maximum reliability ability with minimum contact resistance. Recessed with minimum contact resistance. Base of tip is metal head eliminates possibility of shock or recessed to eliminate shock or grounding. Fits all grounding. Designed for solderless connection of up standard jacks. to 16 gauge stranded wire which fits through handle and tip and is secured by screwing handle tight. Fits all standard tip jacks. MATERIAL: MATERIAL: MATERIAL: Brass, Nickel Plate Tip: Brass, Nickel Plate Tip: Brass, Nickel Plate Handle: Nylon 6/6 Handle: Nylon 6/6 Current Rating: 10 Amps. Current Rating: 10 Amps. 1.000 [25.4] .156 [4.0] DIA. .500 .875 [22.2] .500 [12.7] .070 [1.78] DIA. .328 [8.4] TO ACCEPT WIRE. .875 [22.2] [12.7] TO ACCEPT WIRE. REF. REF. .375 [9.5] DIA. .156 [4.0] .125 [3.2] .080 [2.03] DIA. DIA. DIA. .187 [4.8] .113 [2.9] DIA. .080 [2.03] DIA. .080 [2.03] DIA. DIA. CAT. NO. COLOR CAT. NO. COLOR CAT. NO. COLOR CAT. NO. COLOR 6006 WHITE 6009 GREEN 6000 WHITE 6003 GREEN 6007 RED 6010 YELLOW 6001 RED 6004 YELLOW 6008 BLACK 6011 BLUE CAT. NO. 1601 6002 BLACK 6005 BLUE Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 104 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PLUGS & JACKS TEST JACKS .080 [2.0] PC TEST JACKS VERTICAL SNAP-FIT VERTICAL SPRING CONTACT TO SPRING CONTACT TO ACCEPT .080 [2.03] ACCEPT .080 [2.03] DIA. PIN DIA. PIN .187 [4.8] DIA. .187 [4.8] DIA. .312 [7.9] .312 [7.9] CAT. NO. COLOR CAT. NO. COLOR 6036 WHITE 6042 WHITE .125 [3.2] .125 [3.2] 6037 RED 6043 RED .048 [1.2] 6038 BLACK .039 [0.99] x 6044 BLACK DIA. MATERIAL: .045 [1.14] 6039 YELLOW Body: Nylon per ASTM D4066 6045 YELLOW MATERIAL: 6040 GREEN Contact: Beryllium Copper, Silver Plate 6046 GREEN Body: Nylon per ASTM D4066 6041 BLUE Mounting: Snap-fits into .052 (1.32) hole Contact: Brass, Silver Plate 6047 BLUE LOW PROFILE HORIZONTAL UNIVERSAL HORIZONTAL MINIATURE HORIZONTAL SPRING CONTACT TO SPRING CONTACT TO SPRING CONTACT TO ACCEPT .080 [2.03] ACCEPT .080 [2.03] .156 ACCEPT .080 [2.03] DIA. PIN .156 DIA. PIN [4.0] DIA. PIN [4.0] .147 .460 [11.7] .410 [10.4] [3.7] .208 [5.3] .220 [5.6] .130 .203 .125 .203 [3.3] [5.2] .125 [3.2] [5.2] .133 [3.2] .133 [3.4] .008 [.20] .133 [3.4] .008 [.20] .008 .048 [3.4] [.20] [1.2] .400 [10.2] .048 .200 .048 [1.2] .400 [10.2] [5.1] [1.2] GOLD PLATE SILVER PLATE CAT. NO. COLOR CAT. NO. CAT. NO. COLOR CAT. NO. COLOR 6060 WHITE 6066 6048 WHITE 6054 WHITE 6061 RED 6067 MATERIAL: 6049 RED 6055 RED 6062 BLACK 6068 Body: Nylon per ASTM 6050 BLACK 6056 BLACK D4066 MATERIAL: MATERIAL: 6063 YELLOW 6069 6051 YELLOW 6057 YELLOW Contact: Beryllium Body: Nylon per ASTM D4066 Body: Nylon per ASTM D4066 6052 GREEN 6064 GREEN 6070 6058 GREEN Copper, Gold or Contact: Beryllium Copper, Contact: Beryllium Copper, 6053 BLUE 6059 BLUE 6065 BLUE 6071 Silver Plate Silver Plate Silver Plate HIGH TEMPERATURE PTFE INSULATED TEST POINT JACKS SPECIFICATIONS Bushing: Terminal Jack: Beryllium Copper (QQ-C-533) White PTFE (RoHS Compliant) RoHS * Brass ASTM B16 Red or Black PTFE (Non-RoHS Compliant) .047 [1.2] RoHS Plating: Gold per MIL-G-45204, Type II DIA. (2) PLS. .200 Operating Tempuature: -60 (-50) to + 500 [5.1] .055 [1.4] DIA. D A A Mounting Detail C C A B DIA. D C .140 [3.6] E E .125 [3.2] E B R D R R FIG. 1 FIG. 2 FIG. 3 Accepts RoHS NON-RoHS White Red Black Tip Dia. Tip CAT NO. CAT NO. CAT NO. FIG. A B C D E R ± .001 (.03) Length 11001 11001-R 11001-B 1 .142 (3.6) .120 (3.0) .244 (6.2) .046 (1.2) .120 (3.0) .060 (1.5) .040 (1.0) .205 (5.2) 11002 11002-R 11002-B 1 .142 (3.6) .120 (3.0) .283 (7.2) .046 (1.2) .120 (3.0) .060 (1.5) .040 (1.0) .245 (6.2) 11003 11003-R 11003-B 1 .172 (4.4) .140 (3.6) .142 (3.6) .050 (1.3) .060 (1.5) .080 (2.0) .040 (1.0) .125 (3.2) 11004 11004-R 11004-B 1 .172 (4.4) .148 (3.8) .179 (4.5) .046 (1.2) .120 (3.0) .060 (1.5) .040 (1.0) .140 (3.6) 11005 11005-R 11005-B 1 .218 (5.5) .185 (4.7) .301 (7.6) .050 (1.3) .105 (2.7) .125 (3.2) .080 (2.0) .315 (8.0) 11006 11006-R 11006-B 1 .218 (5.5) .185 (4.7) .271 (6.9) .046 (1.2) .120 (3.0) .074 (1.9) .080 (2.0) .195 (4.9) 11007 11007-R 11007-B 1 .218 (5.5) .185 (4.7) .271 (6.9) .046 (1.2) .120 (3.0) .074 (1.9) .090 (2.3) .195 (4.9) 11008 11008-R 11008-B 1 .218 (5.5) .185 (4.7) .301 (7.6) .046 (1.2) .120 (3.0) .074 (1.9) .080 (2.0) .225 (5.7) 11009 11009-R 11009-B 1 .218 (5.5) .185 (4.7) .400 (10.2) .050 (1.3) .187 (4.8) .074 (1.9) .080 (2.0) .280 (7.1) 11010 11010-R 11010-B 1 .218 (5.5) .185 (4.7) .271 (6.9) .046 (1.2) .136 (3.5) .074 (1.9) .080 (2.0) .340 (8.6) 11011 11011-R 11011-B 2 .218 (5.5) — .430 (10.9) — .150 (3.8) .050 (1.3) .080 (2.0) .200 (5.1) 11012* 11012-R* 11012-B* 2 .218 (5.5) — .500 (12.7) — .150 (3.8) .050 (1.3) .080 (2.0) .280 (7.1) 11013 11013-R 11013-B 3 .218 (5.5) .187 (4.8) .689 (17.5) .500 (12.7) .125 (3.2) .050 (1.3) .080 (2.0) .500 (12.7) 11014 11014-R 11014-B 3 .218 (5.5) .187 (4.8) .378 (9.6) .400 (10.2) .125 (3.2) .050 (1.3) .080 (2.0) .250 (6.4) 11015 11015-R 11015-B 3 .218 (5.5) .187 (4.8) .378 (9.6) .400 (10.2) .187 (4.7) .035 (.89) .080 (2.0) .250 (6.4) 11016 11016-R 11016-B 3 .218 (5.5) .187 (4.8) .378 (9.6) .500 (12.7) .125 (3.2) .050 (1.3) .080 (2.0) .250 (6.4) * Terminal Material: Brass ASTM B16 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 105 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED STANDARD SOLDERLESS SOLDERLESS CONNECTION SOLDERLESS WITH SET SCREW SOLDERLESS CONNECTION .375 [9.5] DIA. .375 [9.5] DIA. .375 [9.5] DIA. .187 [4.8] DIA. .093 [2.36] DIA. x .156 [4.0] DIA. .328 [8.33] DEEP TO ACCEPT TO ACCEPT WIRE. WIRE. .228 [5.8] DIA. .160 [4.1] DIA. SOLDER INSERT 2-56 x 1.000 [25.4] 6080 / 6081 ONLY .187 [4.8] L. .175 (4.5) SCREW .875 [22.2] CRIMP HOLE 1.000 [25.4] Plug 6082 / 6083 ONLY .175 (4.5) .175 (4.5) .281 [7.2] .312 [7.9] HEX Plug Plug .812 [20.6] .608 [15.5] .562 [14.3] .531 [13.5] .562 [14.3] .175 [4.5] .175 [4.5] .175 [4.5] RED BLACK CAT. CAT. WIRE CAT. CAT. MATERIAL: MATERIAL: MATERIAL: NO. COLOR NO. COLOR NO. NO. CONNECTION Spring: Nickel Silver Spring: Nickel Silver Spring: Phosper Bronze 6078 RED 6084 RED 6080 6081 SOLDER Body: Brass, Nickel Plate Body: Brass, Nickel Plate Body: Brass, Nickel Plate 6079 BLACK 6085 BLACK Handle: Nylon Handle: Nylon Handle: Nylon 6082 6083 SOLDERLESS EXTERNAL THREAD SOLDER LUG FOUR LEAF SPRING BARREL SPRING .250 [6.4] .218 [5.6] .250 [6.4] 6-32 THREAD .093 [2.4] DIA. .109 [2.8] DIA. .125 [3.2] 8-32 THREAD L .375 [9.5] .093 [2.36] .312 [7.9] H 1.250 [31.8] A .175 (4.5) .750 [19.1] .175 (4.5) .175 (4.5) .500 [12.7] .437 [11.1] Plug .550 [14.0] Plug Plug .175 [4.5] MATERIAL: .175 [4.5] Spring: Beryllium Copper (Cat. No. 653) .175 [4.45] Spring: Phospor Bronze (Cat. No. 654, 655) Body: Brass, Nickel Plate CAT. NO. HL A MATERIAL: MATERIAL: 653 1.062 (27.0) .500 (12.7) .437 (11.1) Spring: Beryllium Copper Spring: Beryllium Copper Body: Brass, Nickel Plate Body: Brass, Nickel Plate 654 .937 (24.7) .188 (4.8) .550 (14.0) 655 1.250 (31.8) .500 (12.7) .550 (14.0) CAT. NO. 652 CAT. NO. 657 STANDARD RIVET INTERNAL THREAD EXTERNAL THREAD THREAD .250 [6.4] THREAD DIA. L .135 [3.5] DIA. .098 [2.49] DIA. x .093 [2.36] DEEP H H L A .175 (4.5) .187 [4.8] Plug A A D Supplied with screw and lug Supplied with nut and lug Unassembled Unassembled D .175 [4.5] MATERIAL: Spring: Phosphor Bronze MATERIAL: MATERIAL: Body: Brass, Nickel Plate Four Leaf Spring: Phosphor Bronze, Four Leaf Spring: Phosphor Bronze, *Barrel Spring, Beryllium Copper *Barrel Spring, Beryllium Copper CAT. NO. DA H L THREAD Body: Brass, Nickel Plate Body: Brass, Nickel Plate .175 .531 1.125 .375 6074-1 6-32 CAT. CAT. (4.5) (13.5) (28.6) (9.5) NO. D A H THREAD SPRING NO. L A SPRING .175 .531 1.500 .750 6074-2 6-32 ( ) 552-3 .187 4.7 .437 (11.1) 4 leaf 6072 .175 (4.4) .531 (13.5) .960 (24.4) 6-32 4 leaf (4.5) (13.5) (38.1) (19.1) 658 * .187 (4.7) .550 (14.0) barrel 659 .175 (4.4) .550 (14.0) .960 (24.4) 6-32 barrel .300 .750 1.750 .625 1/4-28 6075 552-4 .218 (5.5) (7.5) (19.1) (44.5) (15.9) .437 (11.1) 4 leaf 6073 .218 (5.5) .437 (11.1) 1.120 (28.4) 10-32 4 leaf ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 106 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED 6-32 THREAD BANANA PLUGS BANANA PLUGS & JACKS MINIATURE PLUGS SWAGE MOUNT THREADED SOLDER CONNECTION .190 [4.9] DIA. .187 [4.7] .187 [4.8] DIA. .153 [3.9] .050 [1.27] DIA. DIA. TO ACCEPT .104 [2.7] DIA. WIRE. 2-56 THREAD .078 [1.98] DIA. .276 [7.0] .440 [11.2] .094 [2.39] .110 [2.8] .110 [2.8] .120 (3.0) .120 (3.0) .603 [15.3] Plug Plug .287 [7.3] .480 [12.2] .290 [7.4] .290 [7.4] .120 [3.1] DIA. .120 [3.0] DIA. .120 [3.1] DIA. CAT. MATERIAL: NO. COLOR Spring: Beryllium MATERIAL: 6076 RED MATERIAL: Copper, Nickel Plate Spring: Beryllium Copper, Nickel Plate 6077 BLACK Spring: Beryllium Copper Body: Brass, Body: Brass, Nickel Plate CAT. NO. 452 CAT. NO. 450 451 NONE Body: Brass, Silver Plate Silver Plate Handle: Nylon BANANA JACKS INSULATED SOLDER CONNECTION NON-INSULATED RECESSED HEAD NON-INSULATED MINIATURE JACK Fits panel up to .312 (7.9) .163 [4.2] DIA. .163 [4.2] THRU .562 [14.3] DIA. THRU .106 [2.7] DIA. THRU .550 [14.0] .375 [9.5] .437 [11.1] Accepts Accepts Accepts .312 [7.9] .175 (4.5) .175 (4.5) .120 (3.0) HEX. MOLDED .093 Plug HEX HEAD Plug Plug [2.36] FLAT WASHER .156 [4.0] .062 [1.57] SHOULDER WASHER TERMINAL .500 [12.7] .406 [10.3] .250 [6.4] TERMINAL TERMINAL NUT NUT NUT .250-28 THREAD .250-32 THREAD 10-32 THREAD Supplied with hardware Unassembled CAT. HEAD Supplied with nut and lug. Supplied with lug and nut. MATERIAL: MATERIAL: NO. COLOR Unassembled Unassembled Body: Brass, Nickel Plate Current Rating: 15 Amps MATERIAL: 6093 RED Terminal: Copper, Tinned Body: Brass, Nickel Plate Body: Brass, Nickel Plate CAT. NO. 6095 CAT. NO. 6090 6094 BLACK Hex Head: Phenolic Terminal: Brass, Tin Plate Terminal: Copper, Tinned FULLY INSULATED NON-INSULATED STANDARD HEAD NON-INSULATED Fits panel up to .375 (9.6) MINIATURE STANDARD Accepts Accepts .120 (3.0) .175 (4.5) Plug Plug .163 [4.2] DIA. .163 [4.2] DIA. Accepts Accepts THRU THRU .433 [11.0] .106 [2.7] DIA. .175 (4.5) .175 (4.5) DIA. THRU Plug Plug .187 [4.8] .312 .375 [9.5] [7.9] NUT NUT .468 [11.9] .125 .937 .312 [7.9] [3.2] .075 [1.91] .093 [2.36] [23.8] .218 [5.6] .312-32 DIA. DIA. THREAD .093 [2.36] DIA. L L TERMINAL .500 [12.7] .135 [3.5] .203 [5.2] .234 [6.0] .182 [4.6] DIA. DIA. NUT .250-32 THREAD MATERIAL: MATERIAL: Brass, Tin Plate Brass, Nickel Plate CAT. CAT. NO. L NO. L CAT. Supplied with nut and lug. MATERIAL: 125 (3.2) NO. COLOR 476-2 . 575-4 .218 (5.5) MATERIAL: Unassembled Current Rating: 15 Amps .165 (4.2) (6 ) 476-3 575-6 .265 .7 6091 RED Body: Nylon Body: Brass, Nickel Plate .187 (4.7 ) ( ) CAT. NO. 6096 476-4 575-8 .350 8.9 6092 BLACK Contact: Brass, Tin Plate Terminal: Brass, Tin Plate 107 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SURFACE MOUNT AUDIO JACKS • Mates with 2.5mm and 3.5mm plugs SPECIFICATIONS Housing: Polyamide, UL Rated 94V-0 • Designed for reliable interface with audio equipment Ground Terminal: .012 (.30) Brass, Gold Flash ➀ including computer speakers, headphones, sound Spring Contacts: .008 (.20) Phosphor Bronze, cards, cell phones, etc. Gold Flash ➁ ➄ • Models available for mono and stereo applications Shunt Terminals: .012 (.30) Brass, Gold flash ➂ ➃ • Low profile, surface mount design SUPPLIED ON TAPE AND REEL FOR 2.5 mm PLUGS FOR 3.5 mm PLUGS .374 [9.5] Pad Layout Pad Layout .354 [9.0] .142 [3.6] I. DIA. .102 [2.6] .197 [5.0] (TOP VIEW) .158 [4.0] I. DIA. STEREO (TOP VIEW) .265 [6.8] .079 [2.01] .354 [9.0] SCHEMATIC .059 [1.5] .059 [1.50] .180 [4.6] .067 [1.70] .039 [1.0] .240 [6.1] .020 [0.51] .118 [3.0] .079 [2.01] .110 [2.8] .079 [2.01] .197 [5.0] .157 [4.0] .110 [2.8] (3) PLS 1 12 2 .118 [3.0] 1 2 3 .110 [2.8] .157 .063 [1.60] 1 .063 [1.60] .110 [2.8] 1 .217 .193 4 4 .240 [4.0] .295 .532 .294 DIA. (2) PLS [5.5] DIA. (2) PLS .473 [4.9] .314 5 .590 .354 4 3 [7.5] [6.1] .366 .532 [7.5] [13.5] [12.0] [15.0] [9.0] [8.0] [9.3] .197 [5.0] [13.5] .236 [6.0] 3 2 5 45 MONO 2 4 5 .039 [0.99] 5 .157 [4.0] .472 [12.0] SCHEMATIC .059 (5) PLS .118 [3.00] .088 [2.24] .039 [0.99] [1.50] (2) PLS .100 [2.6] .472 [12.0] (3) PLS (3) PLS .295 .193 [4.9] (2) PLS [7.5] .366 [9.3] 1 CAT. NO. 980TR (Stereo) CAT. NO. 981TR (Stereo) 4 Tape Spec’s: 24mm wide; 16mm pitch Tape Spec’s: 24mm wide; 16mm pitch 5 CAT. NO. 982TR (Mono) CAT. NO. 983TR (Mono) Reel Spec’s: 15 inch reel (1,000 pieces per reel) Reel Spec’s: 15 inch reel (800 pieces per reel) BINDING POSTS These multi-purpose binding posts feature high current rating, captivated heads and All Keystone binding posts are designed to prevent accidental contact with current anti-rotation stud mounting. carrying parts. They feature a “limited opening” captivated head to insure safety. Ideal for audio circuitry, R.F. circuitry, oscilloscopes, power supplies and various Note: Binding Posts accept .175” (4.5) Banana Plugs, .080” (2.08) Tip Plugs, Spade other applications. Lugs, Alligator Clips, Wires and EZ hooks. STANDARD BINDING POST UNINSULATED BINDING POST .423 [10.8] .719 [18.3] DIA. .423 [10.8] .086 [2.18] .719 [18.3] DIA. DIA. .086 [2.18] .203 [5.2] DIA. MAX. .828 [21.1] Mounting Detail .203 [5.2] .312-32 THREAD .437 [11.1] MAX. 4-40 THREAD 6-32 THREAD .250 [6.4] .234 [6.0] .328 [8.4] DIA. For panels up MATERIAL: For panels up to .281 (7.1) thick to .313 (8.0) thick Stud: Brass per QQ-B-626 MATERIAL: Plating: Silver Plate Stud: Brass per QQ-B-626 CAT. NO. COLOR CAT. NO. COLOR Insulation: Nylon Plating: Nickel Plate 7004 RED 7006 RED Insulation: Nylon Current Rating: 15 Amps 7005 BLACK 7007 BLACK Stud to Panel Capacitance: 3.3 pF Nominal Current Rating: 15 Amps, 1000V AC Working STANDARD HEX HEAD STANDARD DUAL HEX HEAD .480 [12.2] HEX. .625 [15.9] .480 [12.2] HEX. .625 [15.9] .093 [2.36] DIA. .093 [2.36] (2) PLS DIA. Mounting Detail .920 [23.4] .500 [12.7] MAX. .920 [23.4] DIA. MAX. THREAD .468 [11.9] .750 [19.1] THREAD Mounting Detail 1.380 [35.1] .750 [19.1] .656 [16.7] GOLD PLATE NICKEL PLATE CAT. CAT. NO. THREAD COLOR NO. THREAD COLOR .500 [12.7] DIA. 4096 8-32 RED 4091 8-32 RED 4097 8-32 BLACK 4092 8-32 BLACK GOLD PLATE NICKEL PLATE MATERIAL: MATERIAL: 7016 10-32 RED 4093 10-32 RED CAT. CAT. Stud: Brass per ASTM B-16. Stud: Brass per ASTM B-16. 7017 10-32 BLACK 4094 10-32 BLACK NO. THREAD NO. THREAD Insulation: Nylon Insulation: Nylon 4108 8-32 7018 8-32 7023 10-32 WHITE 4198 10-32 WHITE Current Rating: 30 Amps, Current Rating: 30 Amps, 4109 10-32 7019 10-32 1000V AC Working 7024 10-32 YELLOW 4199 10-32 YELLOW 1000V AC Working ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 108 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED AUDIO JACKS & BINDING POSTS TRANSISTOR MICA INSULATORS & MOUNTING KITS TRANSISTOR INSULATORS • Rapid Heat Dissipation • High Dielectric Strength • Low Cost These precision stamped mica insulators provide good thermal conductivity: Excellent thermal resistance 1100°F. (593°C) Dielectric constant of 7 at 1000 KHz. .009 watts per square inch per degree celsius per inch in thickness. MATERIAL: .003 (.08) ± .001 (.02) Thick Mica FOR TO-3 CASES FOR TO-66 CASES 1.375 [34.9] 1.500 [38.1] A .960 [24.4] .960 [24.4] 1.187 [30.2] .380 [9.7] .380 [9.7] .521 [13.3] .780 .750 .200 [5.1] .200 [5.1] [19.8] .430 [10.9] [19.1] B .156 [4.0] DIA. .045 [1.14] DIA. .080 [2.03] DIA. .166 [4.2] DIA. C DIA. (2) PLS (2) PLS (2) PLS D DIA. (2) PLS (2) PLS CAT. NO. 4664 CAT. NO. 4666 (2) PLS CAT. NO. AB C D FOR TO-3 CASES 1.562 [39.7] 4651 1.625 (41.3) 1.093 (27.8) .093 (2.36) .166 (4.2) 1.594 [40.5] 1.187 [30.2] 1.655 [42.1] 4652 1.560 (39.6) 1.050 (26.7) .203 (5.15) .171 (4.4) 1.187 [30.2] .521 [13.3] 1.187 [30.2] .521 [13.3] 4653 1.655 (42.1) 1.063 (27.0) .166 (4.2) .166 (4.2) .521 [13.2] 4636 1.655 (42.1) 1.063 (27.0) .052 (1.32) .166 (4.2) 1.062 4644 1.655 (42.1) 1.063 (27.0) .270 (6.9) .166 (4.2) .430 [10.9] 1.141 .430 [10.9] [27.0] 1.063 [29.0] [27.0] .059 [1.50] W. x .105 [2.7] .125 [3.2] DIA. .156 [4.0] DIA. FOR THREADED STUD TRANSISTORS .086 [2.18] H. .055 [1.40] .142 [3.6] DIA. .166 [4.2] DIA. (2) PLS (2) PLS .026 [0.66] DIA. (2) PLS (4) PLS CAT. NO. 4662 CAT. NO. 4667 CAT. NO. 4661 O.D. I.D. FOR PLASTIC CASE .860 [21.9] .580 [14.8] A DIA. .800 [20.3] 1.000 [25.4] .072 [1.9] .580 [14.8] .750 [19.1] CAT. ID OD For Screw .072 [1.9] .515 [13.1] NO. Inside Dia. Outside Dia. Size .520 [13.2] 4678 .120 (3.1) .375 (9.5) 4 .440 [11.2] .200 [5.1] .600 [15.3] .505 [12.9] .072 [1.9] 4679 .144 (3.7) .375 (9.5) 6 .065 [1.65] DIA. (2) PLS 4680 .171 (4.3) .500 (12.7) 8 .141 [3.6] .065 [1.65] DIA. .140 [3.6] DIA. DIA. 4681 .196 (5.0) .625 (15.9) 10 (2) PLS CAT. NO. A (2) PLS 4672 .141 (3.6) 4682 .260 (6.6) .750 (19.0) 1/4 4673 .115 (2.9) 4683 .328 (8.3) .875 (22.2) 5/16 CAT. NO. 4663 CAT. NO. 4671 TRANSISTOR MOUNTING KITS • Complete Kits or Individulal Hardware • Pre-Packaged • Uniform Hardware at Low Cost A A NOT SUPPLIED NOT SUPPLIED NOT SUPPLIED A B B CHASSIS CHASSIS CHASSIS C B C D C E E F D G G E FOR TO-220 CASE FOR TO-3 CASE FOR DO-4, TO-59, TO-60, TO-62 CASES CAT. NO. 4724 Complete Mounting Kit CAT. NO. 4725 Complete Mounting Kit CAT. NO. 4729 Complete Mounting Kit ITEM CAT. NO. DESCRIPTION QTY. ITEM CAT. NO. DESCRIPTION QTY. ITEM CAT. NO. DESCRIPTION QTY. A 4690 4-40 Screw 1 A 4696 6-32 Screw 2 A 4681 Mica Insulator 1 B 4672 Mica Insulator 1 B 4651 Mica Insulator 1 B 4702 Shoulder Washer 1 C 3049 Shoulder Washer 1 C 4698 Shoulder Washer 2 C 4704 Solder Terminal 1 E 4693 Lockwasher 1 D 4699 Metal Washer 2 D 1477 Lockwasher 1 E 4004 Solder Terminal 1 E 4705 10-32 Nut 1 G 4694 4-40 Nut 1 F 4700 Lockwasher 2 G 4701 6-32 Nut 2 FOR TO-66 CASE FOR DO-5, TO-48, TO-61 CASES These pre-packaged universal mounting kits provide CAT. NO. 4726 Complete Mounting Kit CAT. NO. 4730 Complete Mounting Kit all the necessary hardware and insulators required ITEM CAT. NO. DESCRIPTION QTY. ITEM CAT. NO. DESCRIPTION QTY. to securely mount the semiconductor to the chassis. A 4696 6-32 Screw 2 A 4682 Mica Insulator 1 Purchase the complete kit consisting of all hardware B 4666 Mica Insulator 1 B 4711 Shoulder Washer 1 included in one package. Your choice of individual C 4698 Shoulder Washer 2 C 4712 Solder Terminal 1 items available in 100 piece packages. Semicon- D 4699 Metal Washer 2 D 1476 Lockwasher 1 ductors customer supplied. E 4004 Solder Terminal 1 E 4713 1/4-28 Nut 1 F 4700 Lockwasher 2 G 4701 6-32 Nut 2 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 109 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED B E SOCKETS FOR T0-5 & TO-100 “MINI” HALOGEN LAMP SOCKETS Fully molded compact construction. Speeds transistor as- • Accepts .022 (.032) to .032 (.81) diameter Pins or Leads sembly. Incorporates ultra high quality, closed entry, sleeve • The Wire Wrap Pins can be easily bent to achieve a variety of positions type contacts. Accepts .016 (.41) to .020 (.51) diameter leads or .010 (.25)
.018 (.46) rectangular transistor leads. SPECIFICATIONS Base: Glass Filled LCP; Contact: Beryllium Copper, Gold Plate; Shell: Brass, Nickel Plate MATERIAL: CAT. NO. FOR PINS Insulator: Glass Filled Polyester, 4590 TO-5 3 UL Rated 94V-0 4591 TO-5 4 Contact Pin: Brass, Tin-Lead Plate 4592 TO-5 8 RoHS (Non-RoHS Compliant) 4593 TO-100 8 Contact Spring: Beryllium Copper, 4594 TO-100 10 .000030 min. Gold Plate .470 [12.0] .470 [12.0] 45° 45° 45° .394 [10.0] .394 [10.0] .394 [10.0] .170 [4.3] .170 [4.3] .200 [5.1] .200 [5.1] .200 [5.1] .015 [.38] .030 [.76] .160 [4.1] .160 [4.1] Cat. No. 4590 Cat. No. 4591 Cat. No. 4592 .130 [3.3] .130 [3.3] .302 .210 [5.4] .146 [3.7] [7.7] .812 MAX. PIN DEPTH [20.6] .073 [1.85] 45° THRU-HOLE 36° .110 .165 DIA. [2.8] .394 [10.0] .394 [10.0] [4.2] .126 .025 [.64] SQUARE [3.2] WIRE WRAP PIN .230 [5.9] .230 [5.9] .032 [.81] .021 [.53] DIA. THRU DIA. CAT. NO. 4595 CAT. NO. 4596 Cat. No. 4593 Cat. No. 4594 POWER TRANSISTOR MOUNTS TO-3 SOCKET FOR PC BOARDS Molded barrier insulators functionally replaces up to six pieces of conventional insulation Easily assembles onto printed circuit board. Elimi- required with previous methods of mounting power transistors. Built-in barrier eliminates nates wiring. Stops on PC terminals provide suffi- need for sleeving of connections. cient spacing between socket and PC board to NOTE: #6-20 mounting screw available CAT. NO. 4706 permit proper assembly of transistor to socket. Can be screwed down tightly to heat sink. For TO-3 CASES 1.562 [39.7] REF. 1.188 [30.2] .665 [16.9] .425 1.530 [38.9] [10.8] 1.188 [30.2] .460 .140 [3.6] .090 [11.7] I. DIA. .665 [16.9] [2.29] REF. (2) PLS .050 [1.27] I. DIA. .375 [9.6] DIA. (2) PLS .730 .430 (2) PLS [18.6] [10.9] .112 [2.9] DIA. .062 .187 [4.8] (2) PLS .204 [1.57] DIA. (2) PLS [5.2] FORMED THREAD .064 [1.63] DIA. DIA. FOR #6-20 SCREW (2) PLS (TYPE B) (2) PLS MATERIAL: Nylon 6/6, UL Rated 94V-2 .375 [9.6] .562 [14.3] Bottom View Mounting Detail CAT. NO. 4616 .665 [16.9] .156 [4.0] HEAVY DUTY TO-3 MATERIAL: (2) PLS Top Plate: Molded Nylon .218 [5.6] Base: Phenolic 1.562 [39.7] REF. DIA. (2) PLS .430 [10.9] Contacts: Brass, Tin Plate 1.188 [30.2] .070 [1.78] .425 .665 [16.9] Collector Plate: Steel, Tin Plate DIA. (4) PLS [10.8] .100 [2.6] DIA. .215 [5.5] 1.188 [30.2] .537 [13.7] CAT. NO. 4600 REF. .070 [1.78] I. DIA. .140 [3.6] (2) PLS NYLON TO-3 CASE COVERS I. DIA. (2) PLS .112 [2.9] DIA. .062 .187 [4.8] (2) PLS Molded nylon covers easily mount over and insulate the power transistor. Will [1.57] DIA. (2) PLS withstand temperatures to approximately 250°F (107°C). MATERIAL: Glass filled Polyester, .452 [11.5] .387 [9.9] .920 [23.4] .508 [12.9] UL Rated 94V-0 DIA. CAT. NO. 4626 .475 [12.1] For TO-66 CASES .234 [6.0] .840 [21.4] DIA. .062 [1.57] 1.272 [32.3] REF. 1.610 [40.9] .960 [24.4] 1.170 [29.7] .580 .194 A [5.0] [14.8] .140 [3.6] I. DIA. 1.125 [28.6] (2) PLS .050 [1.27] I. DIA. .312 [7.9] DIA. (2) PLS .125 [3.2] DIA. MATERIAL: Nylon 6/6, UL Rated 94V-2 (2) PLS .112 [2.9] DIA. .187 [4.8] .062 (2) PLS DIA. (2) PLS [1.57] EYELETS .312 [7.9] CAT. NO. FOR INSTALLED A MATERIAL: Nylon 6/6, UL Rated 94V-2 .312 [7.9] 4632 TO-3 NONE .210 (5.4) CAT. NO. 4617 4634 TO-3 TWO .140 (3.6) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 110 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED TRANSISTOR SOCKETS & ACCESSORIES TO-3 POWER TRANSISTOR SOCKET & MOUNTING KITS E B SOCKETS FOR TO-3 CASE VARIOUS MOLDED BOSS HEIGHTS MATERIAL: Base: Phenolic, Grade PBE, Type XP Contacts: Brass, Tin Plate Top Plate: Nylon, ASTM-D4066 Phenolic, Grade PBE, Type XP (Cat. No. 4606 only) Collector Plate: Steel, Tin Plate Socket and transistor are assembled to chassis at same time, using the minimum Socket is installed onto chassis using eyelets or screws. Transistor is installed af- amount of hardware. Top molded boss ensure the transistor leads will be isolated from terwards. Assembly and repairs are simplified since socket will stay in place with- the chassis. Various boss heights available to accommodate different out transistor mounted. Top molded boss or added bushing ensure the chassis thicknesses. transistor leads will be isolated from the chassis. Various boss heights available to accommodate standard chassis thicknesses. Use Cat. No. 4606 and nylon bush- ings for special chassis thicknesses. 1.530 [38.9] 1.188 [30.2] A 1.188 [30.2] .460 .665 [16.9] .521 [13.3] .460 [11.7] A .180 [11.7] REF. [4.6] REF. .730 .430 CAT. NO. A DIM. [18.6] [10.9] .204 4606 NONE .220 FORMED THREAD 1.000 [5.2] .695 [5.6] FOR #6-20 SCREW [25.4] 4607 .030 (.76) CAT. NO. A DIM. [17.7] DIA. DIA. (TYPE B) (2) PLS FORMED THREAD .064 [1.63] DIA. FOR #6-20 SCREW 4608 .045 (1.14) (2) PLS 4603 .030 (.76) (TYPE B) (2) PLS .144 [3.7] 4609 .060 (1.52) 4602 .045 (1.14) .430 [11.0] DIA. (2) PLS 1.090 [27.7] 4618 .125 (3.2) 4601 .090 (2.29) 1.350 [34.3] FULLY MOLDED TO-3 SOCKET Pre-assembling the socket to the chassis by eyelets or rivets permits the installation of the semiconductor at a later stage in the assembly. The molded top boss eliminates hardware. .640 [16.3] .221 [5.6] 1.188 [30.2] .515 [13.1] .521 [13.3] .344 [8.8] .430 [10.9] 1.250 .931 [31.8] [23.7] FORMED THREAD .261 [6.7] DIA. FOR #6-20 SCREW MATERIAL: (TYPE B) (2) PLS Base: Molded Nylon 6/6 .430 [10.9] .050 [1.3] 1.226 [31.2] .136 [3.5] DIA. (4) PLS .140 [3.6] 1.500 [38.1] Contacts: Brass, Tin Plate CAT. NO. 4620 Collector Plate: Steel, Tin Plate HEAVY DUTY SOCKET FOR TO-3 CASE 1.600 [40.7] MAX. CHOICE OF SINGLE OR DUAL COLLECTOR SOLDER TABS 1.187 [30.2] .665 [16.9] Features an all-in-one mounting plate and solder tabs, providing .450 [11.5] complete electrical isolation of the solder tab connections. .730 [18.6] Rated 5 Amps DC continuous and 15 Amps DC Intermittent REF. 6-32 THREAD .125 [3.2] DIA. x .250 [6.4] C'BORE (2) PLS .045 [1.14] DEEP With transistor lead-in in- Less transistor lead-in in- .218 [5.6] DIA. (2) INSULATING .700 [17.8] SHOULDERS sulating shoulders sulating shoulders .060 [1.52] MAX. .210 MATERIAL: [5.4] CAT. NO. WITH TAB CAT. NO. WITH TAB Base: Glass Filled Polyester, UL Rated 94V-0 DIA. .325 [8.3] .028 4513 “A” ONLY 4515 “A” ONLY [0.71] Contacts: Brass, Tin Plate 4514 “A” & “B” 4516 “A” & “B” Collector Plate: Brass, Tin Plate TAB 'A' TAB 'B' TO-3 CASE MOUNTING KITS These socket kits provide everything needed to mount a transistor onto a chassis in one kit. Nylon bushings or boss will insulate transistor leads from chassis. Mica insulator isolates transistor from chassis. Two 6-20 screws included to mount transistor. (Transistor not included) CAT. NO. 4734 Complete Mounting Kit CAT. NO. 4732 Complete Mounting Kit CAT. NO. 4733 Complete Mounting Kit ITEM CAT. NO. DESCRIPTION QUANTITY A 4706 6-20 screws 2 ITEM CAT. NO. DESCRIPTION QUANTITY ITEM CAT. NO. DESCRIPTION QUANTITY B 4651 Mica Insulator 1 A 4706 6-20 screws 2 A 4706 6-20 screws 2 C 4684 Nylon Bushing 4 B 4651 Mica Insulator 1 B 4651 Mica Insulator 1 D 4606 Square Socket 1 C 4602 Socket 1 C 4608 Square Socket 1 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 111 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED B E PC BOARD HARDWARE We offer an assortment of standard blank and cutout computer brackets, PCB support brackets, card edge ejectors and guides to provide the right solution for applications such as: • Computer Chassis Assembly • Electronic Peripheral Equipment • Rack Mounted Equipment • Printed Circuit Board Mounting • Printed Circuit Board Supports • Printed Circuit Board insertion and removal • To dress up chassis access panels Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoHS and REACH directives. We provide 3D modeling, CAD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application.. PC BOARD HARDWARE SECTION CONTENTS COMPUTER BRACKETS . . . . . . . . . . . . 118-121 COMPUTER BRACKET WORKSHEET. . . . . . . 122 CONTACT PINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 MOUNTING BRACKETS . . . . . . . . . . . . . . . . 114-115 PC BOARD ACCESSORIES Board Guides. . . . . . . . . . . . . . . . . . . . . . . . . . . 116-117 Card Ejectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 IC Static Tray Clips . . . . . . . . . . . . . . . . . . . . . . . . . . 116 PUSH-IN TERMINALS . . . . . . . . . . . . . . . . . . . . . . 123 113 THREADED MOUNTING BRACKETS 4-40 THREAD 4-40 THREAD 4-40 THREAD .062 [1.57] .047 [1.19] .136 [3.5] DIA. .062 [1.57] .130 [3.3] DIA. 4-40 4-40 THREAD .343 .343 THREAD [8.7] .203 .453 4-40 [8.7] .203 [5.2] [11.5] [5.2] .265 THREAD .250 [6.8] .250 [6.4] .250 [6.4] [6.4] .250 [6.4] .250 .375 [9.5] [6.4] .375 [9.5] .187 [4.8] .312 [7.9] MATERIAL: MATERIAL: MATERIAL: CAT. NO. 621 CAT. NO. 616 CAT. NO. 612 .047 (1.19) Brass, Tin Plate .062 (1.57) Steel, Zinc Plate .062 (1.57) Steel, Zinc Plate 6-32 THREAD 6-32 THREAD 6-32 THREAD .300 [7.6] 6-32 THREAD .032 [.81] .144 [3.7] DIA. .032 [.81] .140 [3.6] DIA. .340 [8.6] .200 [5.1] 6-32 6-32 .375 .420 THREAD THREAD [10.7] [9.5] .120 [3.1] .218 [5.6] .250 [6.4] .200 .100 [2.5] .281 [7.2] .218 [5.6] .165 [4.2] .312 [7.9] [5.1] .375 [9.5] .343 [8.7] .379 [9.6] MATERIAL: MATERIAL: MATERIAL: CAT. NO. 632 CAT. NO. 634 CAT. NO. 614 .032 (.81) Brass, Nickel Plate .032 (.81) Brass, Tin Plate .032 (.81) Brass, Tin Plate 6-32 THREAD 6-32 THREAD 6-32 THREAD .062 [1.57] .130 [3.3] DIA. .625 (2) PLS .062 [1.57] .165 [4.2] DIA. .062 [1.57] [15.9] 1.230 [31.3] .578 .562 [14.7] 6-32 6-32 [14.3] 6-32 .412 THREAD .328 THREAD .437 [10.5] THREAD [8.4] [11.1] .299 [7.6] .500 [12.7] .412 [10.5] .500 [12.7] .218 [5.6] .312 [7.9] .500 [12.7] .562 [14.3] .390 [9.9] MATERIAL: MATERIAL: MATERIAL: CAT. NO. 4334 CAT. NO. 708 CAT. NO. 617 .062 (1.57) Steel, Nickel Plate .062 (1.57 Steel, Nickel Plate .062 (1.57) Steel, Tin Plate 6-32 OR 8-32 THREAD 8-32 THREAD 8-32 THREAD .037 [.94] .136 [3.5] .062 [1.57] DIA. .218 [5.6] RADIUS (2) PLS .312 .156 [4.0] DIA. .037 [.94] .135 [3.5] DIA. .218 .781 [7.9] [5.6] [19.9] THREAD .531 8-32 8-32 .375 [13.5] THREAD [9.5] THREAD .281 .234 [6.0] [7.2] .187 [4.8] .312 [7.9] .250 [6.4] .312 [7.9] .218 [5.6] .375 [9.5] .500 [12.7] .422 [10.7] .437 [11.1] CAT. NO. THREAD 4332 6-32 MATERIAL: MATERIAL: MATERIAL: CAT. NO. 631 4333 8-32 CAT. NO. 611 .037 (.94) Brass, Tin Plate .062 (1.57) Brass, Nickel Plate .037 (.94) Steel, Tin Plate 114 Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED THREADED MOUNTING BRACKETS MOUNTING BRACKETS SNAP-IN THREADED PC MOUNT BRACKETS • Snaps in for wave soldering • Reduces assembly time • Easily mount into predrilled or punched holes • Stable no rock design 4-40 THREAD 6-32 THREAD SNAP-IN PC MOUNT .327 .250 [6.4] [8.3] 4-40 THREAD .180 [4.6] .312 .360 [9.2] [7.9] .512 6-32 THREAD [13.0] .214 [5.5] .050 [1.27] (4) PLS .125 [3.2] .295 .060 [1.52] For screw selection .200 [5.1] [7.5] (4) PLS refer to pages 79 and 123 Mounting Detail Mounting Detail .200 .197 [5.0] [5.1] .214 [5.5] .295 [7.5] .200 [5.1] .197 [5.0] MATERIAL: .032 (.81) Brass, Tin Plate MATERIAL: .032 (.81) Brass, Tin Plate .073 [1.85] DIA. .067 [1.7] DIA. (4) PLS CAT. NO. 7774 (4) PLS CAT. NO. 7779 UNIVERSAL CLEAR HOLE BRACKETS T D HOLE H E HOLE 613 D 618 619 E W 620 L CAT. D HOLE E HOLE T 633 NO. H L W D DIAMETER E DIAMETER MATERIAL FINISH 615 633 .375 (9.5) .375 (9.5) .281 (7.1) .218 (5.5) .140 (3.6) .218 (5.5) .140 (3.6) .032 (.81) Brass Nickel 4335 613 .390 (9.9) .453 (11.5) .375 (9.5) .234 (5.9) .147 (3.7) .299 (7.6) .128 (3.3) .032 (.81) Brass Nickel 4336 4326 615 .420 (10.7) .343 (8.7) .281 (7.1) .281 (7.1) .144 (3.7) .203 (5.2) .128 (3.3) .032 (.81) Brass Tin 4335 .562 (14.3) .562 (14.3) .500 (12.7) .412 (10.5) .120 (3.0) .411 (10.4) .120 (3.0) .062 (1.57) Steel Nickel 4336 .562 (14.3) .562 (14.3) .500 (12.7) .412 (10.5) .144 (3.7) .412 (10.5) .144 (3.7) .062 (1.57) Steel Nickel 618 .628 (16.0) .628 (16.0) .375 (9.5) .378 (9.6) .169 (4.3) .378 (9.6) .169 (4.3) .050 (1.27) Brass Tin 619 .687 (17.4) .687 (17.4) .375 (9.5) .500 (12.7) .144 (3.7) .500 (12.7) .144 (3.7) .032 (.81) Steel Tin 4326 1.013 (25.7) .487 (12.4) .312 (7.9) .816 (20.7) .140 (3.6) .332 (8.4) .140 (3.6) .050 (1.27) Steel Nickel 620 1.156 (29.4) .656 (16.7) .375 (9.5) .906 (23.0) .169 (4.3) .420 (10.7) .169 (4.3) .032 (.81) Steel Tin BOARD BRACKETS Originally designed for our line of standardized terminal boards; these brackets can also be used in other applications. .156 [4.0] DIA. See pages 148-149 for Turret Terminal Boards. (2) PLS S L MATERIALS: .062 (1.57) Steel, Nickel Plate .196 [5.0] W CAT. NO.WL S .203 [5.2] .750 .196 [5.0] 1570 .281 (7.1) 1.187 (30.1) .750 (19.1) DIA. [19.1] .500 [12.7] .375 1556 .375 (9.5) 1.625 (41.3) 1.000 (25.4) [9.5] .328 [8.4] .203 [5.2] 1571 .281 (7.1) 1.625 (41.3) 1.187 (30.1) .530 .560 [13.5] [14.2] 1567 .375 (9.5) 2.125 (54.0) 1.500 (38.1) .750 [19.1] .156 [4.0] 1568 .375 (9.5) 2.625 (66.7) 2.000 (50.8) 1569 .375 (9.5) 3.125 (79.4) 2.500 (63.5) CAT. NO. 4337 .218 [5.6] MATERIAL: .080 (2.03) Aluminum .250 [6.4] .177 [4.5] DIA. .625 1.562 [15.9] (3) PLS [39.7] .312 .128 [3.3] DIA. [7.9] .187 [4.8] .500 [12.7] .312 [7.9] .032 .484 [12.3] [0.8] 6-32 .375 .437 .130 .187 .562 [14.3] THREAD [9.5] [11.1] .250 [6.4] [3.3] [4.8] DIA. DIA. .156 .156 [4.0] [4.0] .187 .312 [7.9] .281 [7.2] .437 [11.1] [4.8] CAT. NO. 1564 CAT. NO. 630 CAT. NO. 4325 MATERIAL: .062 (1.57) Steel, Nickel Plate MATERIAL: .050 (1.27) Steel, Nickel Plate MATERIAL:.032 (.81) Brass, Tin Plate ® Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com 115 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED LEVER ACTION PC CARD EJECTORS Card ejectors offer a simple and reliable way of on board from damage during removal or installation. installing and ejecting circuit boards. Card ejectors Ejectors supplied with stainless steel pin to assure reduce the stress on board connectors by improper quick assembly of ejector to card. removal of board. Ejectors also protect components • Designed for .062 (1.57) PC cards. • Level action ejectors aids card insertion and extraction. • Supplied complete with stainless steel spring pin. MATERIAL: White Nylon 6/6, UL Rated 94V-2 CARD MOUNTING DIMENSIONS .375 1.125 [28.6] [9.6] 1.125 [28.6] .450 .250 .450 .250 PC CARD [11.5] [6.4] [11.5] [6.4] .250 [6.4] .640 [16.3] .109 [2.8] DIA. .640 .390 .093 [9.9] .250 .093 [16.3] [2.36] MOUNTING .250 [6.4] [6.4] [2.36] DIA. HOLE DIA. .075 .140 [3.6] .075 [1.90] .140 [3.6] RADIUS [1.90] RADIUS CAT. NO. 8640 CAT. NO. 8641 .290 [7.4] .375 .980 [24.9] .250 1.250 [31.8] 1.100 [28.0] .250 [9.5] [6.4] [6.4] .250 .375 .260 [6.6] [6.4] [9.5] .640 .600 .520 .390 .093 .093 .134 .093 .390 [16.3] [15.3] [13.2] .125 [9.9] [2.36] [2.36] [3.4] [2.36] [9.9] [3.2] DIA. DIA. DIA. .075 .140 [3.6] .075 .075 .140 [3.6] .140 [3.6] [1.90] RADIUS [1.90] [1.90] RADIUS RADIUS CAT. NO. 8642 CAT. NO. 8643 CAT. NO. 8644 HORIZONTAL TYPE PC BOARD GUIDES Guides may be used horizontally or vertically and snap into .125 (3.2) diameter holes. Narrow width allows maximum density and optimum airflow. Simple press-fit, secure installation. No special tools required to install. • Sturdy Nylon construction • Mounts into chassis with out tools • Assures proper alignment of board • Quick and easy installation of board. CAT. NO. LA B 8620 2.5 (63.5) 2.0 (50.8) — L 8621 3.0 (76.2) 2.5 (63.5) — .078 [2.0] 8622 3.5 (88.9) 3.0 (76.2) — .245 [6.2] 8623 4.0 (101.6) 3.5 (88.9) — .125 [3.2] 8624 4.5 (114.3) 4.0 (101.6) — .085 [2.2] 8625 5.0 (127.0) 4.5 (114.3) — 8626 5.5 (139.7) 5.0 (127.0) — .172 [4.4] REF. 8627 6.0 (152.4) 5.5 (139.7) — B .132 [3.4] 8628 6.5 (165.1) 6.0 (152.4) — .250 [6.4] A 8629 7.0 (177.8) 6.5 (165.1) — 8630 7.0 (177.8) 6.5 (165.1) 3.25 (82.6) 8631 7.5 (190.5) 7.0 (177.8) — 8632 7.5 (190.5) 7.0 (177.8) 3.50 (88.9) Mounting Detail 8633 8.0 (203.2) 7.5 (190.5) — A 8634 8.0 (203.2) 7.5 (190.5) 3.75 (95.3) .120 [3.1] B (2) PLS 8635 8.5 (215.9) 8.0 (203.2) — MATERIAL: .218 [5.6] .125 [3.2] DIA. (2) PLS 8636 8.5 (215.9) 8.0 (203.2) 4.00 (101.6) Natural Nylon 6/6, UL Rated 94V-2 ® Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com 116 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PC BOARD ACCESSORIES PC BOARD GUIDES VERTICAL PC BOARD GUIDES Vertical board guides provide for a quick and easy assembly of circuit boards. Sturdy design assures boards stay square. These guards can be mounted to chassis or directly to a mother board. Mounting holes have brass threaded inserts to assure .118 [3.00] secure mounting of guide. After bracket is installed, boards are .087 [2.20] quickly locked into place or released for repair or upgrades. Locking pins at the top of the bracket can be set/released using finger pressure, no tools are required. A • Brass threaded inserts assure sturdy connection to chassis or mother board. • Available for circuit boards 1.970” to 6.300” tall. • Locking pin keeps circuit board locked into place. • M3 mounting screws available. • All brackets use same footprint, no redesign of mounting holes required if changing bracket height. .072 [1.8] .072 [1.8] H A H A .710 [18.0] .315 [8.0] M3 X 0.5 THREAD .473 [12.00] (2) PLS. .709 [18.0] .315 [8.0] M3 X 8 THREAD .473 [12.00] (2) PLS. CAT. H A LOCK NO. HEIGHT PIN HEIGHT 8645 1.970 (50.0) 1.650 (42.0) 8646 2.560 (65.0) 2.250 (56.5) MATERIAL: MATERIAL: CAT. H A LOCK 8647 3.540 (90.0) 3.200 (81.5) Guide: Nylon Guide: Polystyrene NO. HEIGHT PIN HEIGHT 8648 4.725 (120.0) 4.430 (112.5) Threaded Insert: Brass, Nickel plate Threaded Insert: Brass, Nickel plate 8649 6.300 (160.0) 6.000 (152.0) M3 MOUNTING SCREW • Pan head screw • Available in four lengths to accommodate most board thicknesses • Flat washer available: P/N 4693 L CAT. NO. L M3 THREAD 29311 6.00 29314 12.00 29316 16.00 29318 25.00 MATERIAL: Steel, Zinc plate ® Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com 117 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED STANDARD BLANK BRACKETS These computer brackets have been designed EISA/ISA to accommodate a large variety of board sizes and heights. Available with tabs located properly for ESA/EISA or PCI formats. Blanks can be machined or stamped for prototype or low volume production. All .174 brackets are nickel plated for a clean look and a pro- [4.4] 4.725 [120.0] .250 [6.4] tective finish. Standard cut-outs can be added to 4.440 [112.8] .125 .120 these blanks to suit your specific production needs. [3.2] .187 [4.8] DIA. [3.1] See page 118-119 for standard cut-outs and design .740 .720 worksheet. [18.8] [18.3] .317 • Premium quality .450 [8.1] 2.225 [56.5] 1.250 [31.8] [11.5] .401 .110 • Designed to fit all PC computers height [10.2] 4.213 [107.0] [2.8] brackets available • Blanks available for “fillers” .210 [5.4] • Fast delivery and cost effective tooling for special designs .350 [8.9] 4-40 THREAD (2) PLS .240 [6.1] (2) PLS CAT. NO. 9202 MATERIAL: .032 (.81) Steel, Matte Nickel Plate. PCI .174 .174 [4.4] 4.725 [120.0] [4.4] 4.725 [120.0] .250 [6.4] .250 [6.4] 4.440 [112.8] 4.440 [112.8] .125 .125 .120 .120 .250 [6.4] [3.2] [3.2] [3.1] [3.1] .187 [4.8] DIA. .250 [6.4] .187 [4.8] DIA. .750 .750 .725 .725 [19.1] [19.1] [18.4] [18.4] .330 .330 .450 .450 .609 [15.5] [8.4] .398 [10.1] .100 [8.4] [11.5] [11.5] .401 .401 .100 4.213 [107.0] [2.6] 3.362 [85.4] [10.2] [10.2] [2.6] 4.213 [107.0] .177 [4.5] .343 [8.7] .295 [7.5] 4-40 THREAD .467 [11.9] .240 [6.1] 4-40 THREAD (2) PLS .310 [7.9] (2) PLS CAT. NO. 9203 CAT. NO. 9204 EISA/ISA or PCI • Reinforced with rib for extra strength .174 [4.4] .174 4.725 [120.0] .250 [6.4] [4.4] 4.725 [120.0] 4.440 [112.8] .125 .250 [6.4] .120 [3.2] 4.440 [112.8] .125 [3.1] .187 [4.8] DIA. .120 [3.2] .187 [4.8] DIA. [3.1] .750 .642 .725 .750 [19.1] [16.3] .725 [18.4] [19.1] [18.4] .330 .450 [8.4] .330 .100 .401 [11.5] .450 4.130 [104.9] [8.4] [2.6] 4.213 [107.0] .100 [10.2] [11.5] .401 4.213 [107.0] [2.6] [10.2] 4.362 [110.8] P/N 9201 CAT. NO. 9200 CAT. NO. 9201 118 Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED COMPUTER BRACKETS COMPUTER BRACKETS STANDARD BLANK BRACKETS EISA/ISA 4.725 [120.0] .174 .174 [4.4] [4.4] 4.725 [120.0] 4.440 [112.8] .250 [6.4] .250 [6.4] 4.440 [112.8] 4.213 [107.0] .120 .120 .125 [3.2] .125 [3.2] .187 [4.8] DIA. [3.1] [3.1] .187 [4.8] DIA. .750 .740 .725 .740 [18.8] .791 [20.1] .725 [19.1] [18.8] [18.4] [18.4] .327 .450 .327 .450 .551 [14.0] [8.3] .110 [11.5] [8.3] .401 .100 [11.5] .401 [2.8] 2.402 [61.0] [10.2] 3.429 [87.1] [2.6] [10.2] .250 [6.4] .453 [11.5] .229 [5.8] .110 [2.8] REF. .305 [7.8] (2) PLS .547 [13.9] .330 [8.4] 4-40 THREAD (2) PLS 4-40 THREAD .315 [8.0] (2) PLS .395 [10.1] (2) PLS (2) PLS .315 [8.0] .315 [8.0] 3.500 [88.9] CAT. NO. 9205 CAT. NO. 9206 4.725 [120.0] 4.725 [120.0] .174 [4.4] .174 [4.4] 4.440 [112.8] 4.440 [112.8] .740 .250 [6.4] .250 [6.4] [18.8] 4.213 [107.0] .120 .125 4.213 [107.0] .120 .125 [3.2] [3.1] [3.2] .187 [4.8] DIA. .187 [4.8] DIA. [3.1] .850 .791 .758 .725 .725 .850 [21.6] [20.1] [21.6] [19.3] [18.4] [18.4] .235 .327 [6.0] .450 [11.5] .450 [11.5] 3.504 [89.0] [8.3] .092 [2.4] .401 .401 (2) PLS .490 [12.5] [10.2] [10.2] .453 [11.5] .273 [7.0] 4-40 THREAD .547 [13.9] .642 [16.3] .736 [18.7] (2) PLS 4-40 THREAD .472 [12.0] .421 [10.7] .075 [1.9] (2) PLS .315 [8.0] .310 [7.9] .047 [1.2] (2) PLS (2) PLS 3.575 [90.8] 3.500 [88.9] CAT. NO. 9207 CAT. NO. 9208 LOW PROFILE BLANK BRACKETS 3.118 [79.2] .466 [11.9] 3.118 [79.2] .466 [11.9] 2.814 [71.5] .120 [3.05] .120 [3.05] .341 [8.7] 2.814 [71.5] (EMI DIMPLE) .190 [4.9] 2.122 [53.9] (EMI DIMPLE) .725 .725 .557 [14.2] .675 [17.2] .866 [22.0] [18.4] [18.4] .732 [18.6] .732 [18.6] .141 [3.6] .174 [4.4] .401 .141 [3.6] .401 .125 [3.2] [10.2] [10.2] .031 [0.79] .216 [5.5] DIMPLE .340 [8.7] 4-40 THREAD (2) PLS CAT. NO. 9230 CAT. NO. 9231 119 Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED STANDARD COMPUTER BRACKETS D-SUB These computer brackets have been designed with a production requirements, we can fabricate a bracket to • Peripherals • Video Cards variety of holes and cutouts to connect most peripherals. The your exact specifications. Refer to pages 122 - 123 for blank • Parallel/Serial Ports • External Hard Drives brackets shown reflect the most common configurations for dimensions and page 126 for standard cutout dimensions. • External CD Drives most applications. If our standard brackets do not fit your 9 PIN For Bracket Dimensions EISA/ISA For Bracket Dimensions PCI Refer to Cat. No. 9200 Refer to Cat. No. 9200 1.470 [37.4] 1.707 [43.4] CUTOUT TYPE 9 CUTOUT TYPE 9 1.962 [49.9] REF. 2.199 [55.9] REF. CAT. NO. 9200-1 CAT. NO. 9200-2 For Bracket Dimensions EISA/ISA For Bracket Dimensions EISA/ISA Refer to Cat. No. 9207 Refer to Cat. No. 9200 .578 [14.7] .578 [14.7] CUTOUT TYPE 9 CUTOUT TYPE 9 1.070 [27.2] REF. 1.070 [27.2] REF. CAT. NO. 9200-16 CAT. NO. 9207-1 15 PIN EISA/ISA EISA/ISA For Bracket Dimensions For Bracket Dimensions Refer to Cat. No. 9200 Refer to Cat. No. 9200 2.295 [58.3] 2.193 [55.7] CUTOUT TYPE 15 CUTOUT TYPE 15 2.950 [75.0] REF. 2.849 [72.4] REF. CAT. NO. 9200-11 CAT. NO. 9200-3 25 - 37 PIN EISA/ISA – 25 PIN EISA/ISA – 37 PIN For Bracket Dimensions For Bracket Dimensions Refer to Cat. No. 9200 Refer to Cat. No. 9200 1.883 [47.9] 1.004 [25.5] CUTOUT TYPE 37 CUTOUT TYPE 25 2.808 [71.3] REF. 2.254 [57.3] REF. CAT. NO. 9200-4 CAT. NO. 9200-5 50 PIN VENT For Bracket Dimensions EISA/ISA – 50 PIN EISA/ISA OR PCI Refer to Cat. No. 9200 .700 [17.8] CUTOUT TYPE 50 .125 [3.2] DIA. HOLE TYP. 1.903 [48.4] REF. CAT. NO. 9200-14 CAT. NO. 9200-19 LOW PROFILE ACCESS PORT For Bracket Dimensions Refer to Cat. No. 9231 .270 [6.9] .313 [8.0] 1.600 [40.7] .462 [11.8] CAT. NO. 9231-1 ® Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com 120 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED COMPUTER BRACKETS COMPUTER BRACKETS PHONE HAND SET LINE ISDN S-V IN VIDEO IN OUTPUT MIC INPUT AUDIO OUT AUDIO IN MULTIPLE D-SUB For Bracket Dimensions For Bracket Dimensions EISA/ISA EISA/ISA Refer to Cat. No. 9200 Refer to Cat. No. 9200 2.193 [55.7] 1.883 [47.9] CUTOUT TYPE 15 CUTOUT TYPE 15 .593 [15.1] .320 [8.2] CUTOUT TYPE 25 (2) PLS 1.249 [31.8] REF. .976 [24.8] REF. 2.808 [71.3] REF. 2.849 [72.4] REF. CAT. NO. 9200-12 CAT. NO. 9200-13 For Bracket Dimensions For Bracket Dimensions EISA/ISA EISA/ISA Refer to Cat. No. 9200 Refer to Cat. No. 9200 2.408 [61.2] 1.883 [47.9] CUTOUT TYPE 9 CUTOUT TYPE 9 .578 [14.7] 1.008 [25.6] CUTOUT TYPE 25 (2) PLS 1.500 [38.1] REF. 1.070 [27.2] REF. 2.900 [73.7] REF. 2.809 [71.4] REF. CAT. NO. 9200-15 CAT. NO. 9200-17 SCSI For Bracket Dimensions For Bracket Dimensions SCSI 1 - 50 PIN SCSI 2, 3 & 4 - 50 PIN Refer to Cat. No. 9200 Refer to Cat. No. 9200 CUTOUT CUTOUT SCSI 1 .800 SCSI 2, 3 OR 4 1.509 [38.4] 50 PIN .088 [2.24] [20.3] 50 PIN .075 [1.91] 1.715 [43.6] REF. 2.424 [61.6] REF. CAT. NO. 9200-6 CAT. NO. 9200-8 For Bracket Dimensions For Bracket Dimensions SCSI 1 - 68 PIN SCSI 2, 3 & 4 - 68 PIN Refer to Cat. No. 9200 Refer to Cat. No. 9200 CUTOUT CUTOUT SCSI 1 SCSI 2, 3 OR 4 .920 [23.4] .982 [25.0] 68 PIN 68 PIN .088 [2.24] .080 [2.03] 2.060 [52.3] REF. 2.122 [53.9] REF. CAT. NO. 9200-7 CAT. NO. 9200-9 PERIPHERAL For Bracket Dimensions For Bracket Dimensions SOUND CARDS PCI EISA/ISA ISDN/PC FAX Refer to Cat. No. 9204 Refer to Cat. No. 9203 .280 [7.1] DIA. 1.975 [50.2] (3) PLS 1.550 [39.4] .640 [16.3] 2.305 [58.6] .525 [13.4] .480 [12.2] 1.765 [44.9] CUTOUT TYPE 15 .335 [8.5] .500 [12.7] 2.404 [61.1] CAT. NO. 9204-1 3.059 [77.7] REF. CAT. NO. 9203-1 For Bracket Dimensions For Bracket Dimensions PCI VIDEO CARDS EISA/ISA FAX - MODEM Refer to Cat. No. 9201 Refer to Cat. No. 9202 3.200 [81.3] 2.810 [71.4] .270 [6.9] DIA. 1.070 [27.2] .450 [11.5] (2) PLS 1.043 [26.5] 1.445 [36.7] .585 DIA. [14.9] .478 [12.2] (2) PLS 1.493 [37.9] CUTOUT TYPE 9 CAT. NO. 9201-1 1.985 [50.4] REF. CAT. NO. 9202-1 For Bracket Dimensions For Bracket Dimensions EISA/ISA OR PCI USB PCI NETWORK Refer to Cat. No. 9200 Refer to Cat. No. 9203 2.110 [53.6] 1.160 [29.5] 2.185 [55.5] 1.910 [48.5] 1.160 [29.5] .150 [3.8] DIA. 1.710 [43.5] .530 [13.5] (3) PLS .595 [15.1] .835 [21.2] (2) PLS .550 [14.0] .255 [6.5] (2) PLS .128 [3.3] DIA. (4) PLS .650 [16.5] .302 [7.7] CAT. NO. 9200-10 CAT. NO. 9203-2 ® Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com 121 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED CUSTOM BRACKET WORKSHEET EISI/ISA or PCI PCI with TABS 'Y' DATUM 'Y' DATUM '0 - 0' '0 - 0' 'X' DATUM 'X' DATUM '0 - 0' '0 - 0' 4-40 THREAD (2) PLS CAT. NO. 9200 3.362 [85.4] .398 [10.1] ■ CAT. NO. 9201 (Ribbed) ■ CAT. NO. 9230 CAT. NO. 9203 ■ ■ EISA/ISA with TABS EISA/ISA with TABS 'Y' DATUM 'Y' DATUM '0 - 0' '0 - 0' 'X' DATUM 'X' DATUM '0 - 0' '0 - 0' 4-40 THREAD (2) PLS 4-40 THREAD 2.225 [56.5] 1.250 [31.8] (2) PLS 2.402 [61.0] .551 [14.0] CAT. NO. 9202 CAT. NO. 9206 ■ ■ EISA/ISA with TABS EISA/ISA with TABS 'Y' DATUM 'Y' DATUM '0 - 0' '0 - 0' 'X' DATUM 'X' DATUM 3.453 [87.7] '0 - 0' '0 - 0' 4-40 THREAD 4-40 THREAD (2) PLS (2) PLS 3.500 [88.9] CAT. NO. 9205 ■ CAT. NO. 9207 CAT. NO. 9208 ■ ■ LOW PROFILE with TABS PCI with TAB 'Y' DATUM 'Y' DATUM '0 - 0' '0 - 0' 'X' DATUM 'X' DATUM '0 - 0' '0 - 0' 4-40 THREAD 4-40 THREAD .250 [6.4] (2) PLS 2.122 [53.9] .190 [4.9] CAT. NO. 9231 CAT. NO. 9204 ■ ■ NOTE: Refer to pages 114 and 115 for overall blank dimensions If you do not have your own drawing, please use the worksheet provided. STEP 1: Select a standard blank configuration PCI or EISA/ISA, with or Name: Title: without tabs. STEP 2: If you’ve selected a standard blank with tabs and the tab Company: locations do not meet your requirements, indicate the dimensions in the boxes. Address: STEP 3: Place your standard panel cutouts (Ex: DB9) on your selected drawing. STEP 4: Use Datum’s X and Y on drawing, to indicate the precise location of the center lines of the cutout(s). Phone: Fax: STEP 5: For stamped identification markings indicate the approximate location(s). For prompt quotations fax, mail or e-mail this worksheet. STEP 6: Quantities Required: If you have any questions, please contact our application engineers. 122 Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED CUSTOM BRACKET WORKSHEET PUSH-IN TERMINALS & PINS MINIATURE TUBULAR TERMINALS • Quick and Easy to Install • For Production or Prototype • Postive Locking In-Hole • No Staking Required • Holds .010 (.25) to .050 (1.27) Diameter Wire These terminals are often used for transistor and Bi-Pin lamp sockets. Terminals Terminals 1236 and 1237 have tapered socket spring forming that will snap into place and are firmly held without the need of staking. Wire leads can hold multiple leads in place. Terminals are pre-tinned for easy soldering. be inserted from either end. INSERTION TOOL .062 (1.57) — .067 (1.70) For Arbor Press: CAT. NO. TL-11; For Hand Tool: CAT. NO. 1214 Mounting Holes .080 [2.03] .080 [2.03] DIA. FLANGE DIA. FLANGE .080 [2.03] .050 [1.27] .050 [1.27] DIA. FLANGE I. DIA. I. DIA. .050 [1.27] .065 [1.65] .065 [1.65] I. DIA. .219 .219 DIA. DIA. [5.6] [5.6] .469 .065 [1.65] .469 .219 DIA. .328 [11.9] [11.9] [5.6] .188 [8.4] .188 MATERIAL: MATERIAL: MATERIAL: [4.8] [4.8] .006 (.15) Matte Tin, Brass. .006 (.15) Matte Tin, Brass. .006 (.15) Matte Tin, Brass. Pre-Tinned .046 [1.17] Pre-Tinned Pre-Tinned .047 [1.19] DIA. FLARE CAT. NO. 1236 CAT. NO. 1237 CAT. NO. 1238 “FLEA” CLIP “IMP” TERMINAL For subminiature applications where conventional terminals are too large or too Excellent for point to point or feed thru wiring. Slot is serrated to grip costly. Ideal for quick repairs of printed circuitry. Simply insert wire through hole component leads. Multiple connections are made quick and easy. and it is held firmly by spring action assuring continued postive contact. .078 [1.98] REF. .053 .030 [.76] [1.35] .045 REF. [1.14] DIA. .130 .437 .375 Mtg. Hole .062 (1.57) Mtg. Hole .062 (1.57) [3.3] [11.1] [9.6] .237 .187 Insertion Tool: CAT. NO. 1322 Insertion Tool: CAT. NO. 1322 [6.0] [4.8] .058 MATERIAL: MATERIAL: .064 [1.48] [1.7] .008 (.20) Matte Tin, Beryllium .053 [1.34] .008 (.20) Matte Tin, Beryllium .052 [1.32] Copper, Tin Plate Copper, Tin Plate CAT. NO. 1500 CAT. NO. 1499FT CLAMP TERMINAL “MICRO” TERMINAL Terminal for production or prototype use. Holds as many as 7 leads without Easily press-fit into a .042 (1.07) diameter hole may be flared for permanent soldering, by spring action. installation. Ideally designed for use in circuitry to support components when space is at a premium. .234 [6.0] REF. .063 [1.6] REF. .030 [.76] .040 .100 [2.6] [1.02] .031 [.79] .260 [6.6] .812 [20.6] DIA. DIA. .359 Mtg. Hole .093 (2.36) [9.1] .167 .312 [7.9] Insertion Tool: CAT. NO. 1323 Insertion Tool: CAT. NO. 1322 [4.3] .078 [1.98] .018 [.46] DIA. MATERIAL: MATERIAL: .008 (.20) Matte Tin, .094 [2.39] .046 [1.17] .085 [2.16] .034 [.86] .015 (.38) Matte Tin, Spring Steel, Beryllium Copper, .062 [1.57] Tin Plate .032 [0.81] Tin Plate .085 [2.16] CAT. NO. 1498CP CAT. NO. 1495 .025 SQUARE WIRE WRAP PINS CONTACT PINS (SEAMLESS) Completely burr free straight to within .003 (.08) per inch. Conical ends of square-wire with Pins can be staked to .062 (1.57) and .093 (2.36) thick boards. smooth blend-in radius on corners assures ease of insertion with minimum damage to pre-plated PCB holes. CAT. L CAT. L B NO. Length NO. Length CAT. NO. AB L .034 A A 5070 .400 (10.2) 5077 .642 (16.3) [.86] 1223 .093 (2.36) .293 (7.4) 60° .003 R. 5071 .440 (11.2) 5078 .675 (17.1) 1224 .093 (2.36) .357 (9.1) .125 [3.2] [.08 R] .010 [.25] .025 5072 .515 (13.1) 5079 .720 (18.3) 1226 .093 (2.36) .437 (11.1) [.64] 5073 .535 (13.6) 5080 .850 (21.6) 1200 .125 (3.18) .379 (9.6) 5074 .600 (15.2) 5081 .916 (23.3) 1210 .125 (3.18) .566 (14.4) 5075 .615 (15.6) 5082 .995 (25.3) 1230 .156 (3.96) .379 (9.6) 5076 .625 (15.9) 5083 1.13 (28.7) 1231 .156 (3.96) .566 (14.4) MATERIAL: Phosphor Bronze, Tin Plate MATERIAL: Brass, Nickel Plate ® Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com 123 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED MULTI-PURPOSE HARDWARE Products such as washers, hole plugs, grommets, bumpers, bushings, clamps, rivets, brackets and ties have can be used in a multitude of envi- ronments and applications such as: • Chassis mounts and holes • Access panels • Wiring Outlets • Electrical insulation • Mechanical damping • Cable/Fiber optic routing & securing • PC board and electronic assemblies Our quality system is ISO 9001:2008 certified. Our products are in compliance with the RoHS and REACH directives. We provide 3D modeling, CAD and other application-engineering support for modifications, special designs or assembly requirements to assist you in choosing the right Keystone product for your application. MULTI-PURPOSE HARDWARE SECTION CONTENTS CABLE MANAGEMENT TERMINAL BOARDS Cable Clamps. . . . . . . . . . . . . . . . . . . . . . . 126-127 Turret . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140-142 Cable Ties & Clips . . . . . . . . . . . . . . . . . . . . . . . . . 127 Quick Fit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Binding Post (Screw) . . . . . . . . . . . . . . . . . . . . . 143 CASE HARDWARE Solder Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Anti-Vibration Grommets . . . . . . . . . . . . . . . . 129 Bumpers & Feet. . . . . . . . . . . . . . . . . . . . . . . . . . 130 UNIVERSAL HARDWARE Bushings, Nylon” . . . . . . . . . . . . . . . . . . . . . . . . . 128 Eyelets & Rivets . . . . . . . . . . . . . . . . . . . . . . . . . 134 Grommets, Rubber & Nylon” . . . . . . . . . . . . . . 129 Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Hole plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 TERMINALS Washers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Feed Thru . . . . . . . . . . . . . . . . . . . . . . . . . 136-137 Washers, Retaining . . . . . . . . . . . . . . . . . . . . . . . 131 Insulated Terminals . . . . . . . . . . . . . . . . 136-137 Washers, Shoulder . . . . . . . . . . . . . . . . . . . . . . . 132 Turret Terminals (Non-insulated) . . . 138-139 125 STEEL CABLE CLAMPS STEEL HALF CLAMPS Ideal for securing, grounding and routing cable, wiring, piping, tubing, components Ideal for securing, grounding and routing cable, wiring, piping, tubing, components and fibre optics. and fibre optics. .218 L [5.6] W .500 [12.7] H L .203 [5.2] DIA. G B D D MATERIAL: .032 (.81) Steel, Zinc Plate MATERIAL: Steel, Zinc Plate CAT. DH L G W NO. FOR DIA. HOLE DIA. CTR TO CTR B THICK WIDTH CAT. DL 8140 .125 (3.2) .218 (5.5) .437 (11.1) .125 (3.2) NO. FOR DIA. CTR TO CTR 8100 .187 (4.7) .375 (9.5) 8141 .187 (4.7) .218 (5.5) .437 (11.1) .156 (4.0) .032 (.81) .500 (12.7) 8142 .250 (6.4) .218 (5.5) .437 (11.1) .187 (4.7) 8101 .250 (6.4) .406 (10.3) 8143 .312 (7.9) .218 (5.5) .500 (12.7) .250 (6.4) .048 (1.22) .500 (12.7) 8102 .312 (7.9) .437 (11.1) 8103 .375 (9.5) .468 (11.9 ) 8144 .375 (9.5) .218 (5.5) .531 (13.5) .312 (7.9) .048 (1.22) .625 (15.9) 8145 .437 (11.1) .218 (5.5) .562 (14.3) .375 (9.5) 8104 .437 (11.1) .500 (12.7) 8105 .500 (12.7) .531 (13.5) 8146 .500 (12.7) .218 (5.5) .625 (15.9) .437 (11.1) 8147 .562 (14.3) .218 (5.5) .687 (17.4) .500 (12.7) .060 (1.52) .625 (15.9) 8106 .562 (14.4) .562 (14.3) 8148 .625 (15.9) .218 (5.5) .750 (19.1) .562 (14.3) 8107 .625 (15.9) .594 (15.1) 8108 .687 (17.4) .625 (15.9) 8149 .687 (17.4) .218 (5.5) .812 (20.6) .625 (15.9) 8150 .750 (19.1) .218 (5.5) .812 (20.6) .687 (17.4) .060 (1.52) .625 (15.9) 8109 .750 (19.0) .656 (16.7) 8110 .812 (20.6) .687 (11.4) 8151 .812 (20.6) .218 (5.5) .875 (22.2) .750 (19.1) 8152 .875 (22.2) .281 (7.1) .937 (23.8) .812 (20.6) 8111 .875 (22.2) .718 (18.2) 8153 .937 (23.8) .281 (7.1) .968 (24.6) .812 (20.6) .060 (1.52) .750 (19.1) 8112 .937 (23.8) .750 (19.1) 8113 1.00 (25.4) .781 (19.8) 8154 1.000 (25.4) .281 (7.1) 1.000 (25.4) .937 (23.8) INSULATED STEEL CABLE CLAMPS INSULATED STEEL HALF CLAMPS Ideal for securing, insulating and routing cable, wiring, piping, tubing, components Ideal for securing, insulating and routing cable, wiring, piping, tubing, components and fibre optics. and fibre optics. .218 [5.6] L W .500 [12.7] L H .203 [5.2] DIA. G B MATERIAL: .032 (.81) Steel, MATERIAL: Steel, Zinc Plate D Zinc Plate Cushion: Black Vinyl D Cushion: Black Vinyl CAT. DH L G W NO. FOR DIA. HOLE DIA. CTR TO CTR B THICK WIDTH CAT. DL NO. FOR DIA. CTR TO CTR 8160 .187 (4.7) .218 (5.5) .437 (11.1) .187 (4.7) .032 (.81) .500 (12.7) 8121 .187 (4.7) .406 (10.3) 8161 .250 (6.4) .218 (5.5) .500 (12.7) .250 (6.4) .048 (1.22) .500 (12.7) 8122 .250 (6.4) .437 (11.1) 8162 .312 (7.9) .218 (5.5) .531 (13.5) .312 (7.9) .048 (1.22) .625 (15.9) 8123 .312 (7.9) .468 (11.9) 8163 .375 (9.5) .218 (5.5) .562 (14.3) .375 (9.5) 8124 .375 (9.5) .500 (12.7) 8164 .437 (11.1) .218 (5.5) .625 (15.9) .437 (11.1) 8125 .437 (11.1) .531 (13.5) 8165 .500 (12.7) .218 (5.5) .687 (17.4) .500 (12.7) 8126 .500 (12.7) .562 (14.3) 8166 .562 (14.3) .218 (5.5) .750 (19.1) .562 (14.3) 8127 .562 (14.3) .594 (15.1) .060 (1.52) .625 (15.9) 8167 .625 (15.9) .218 (5.5) .812 (20.6) .625 (15.9) 8128 .625 (15.9) .625 (15.9) 8168 .687 (17.4) .218 (5.5) .812 (20.6) .687 (17.4) 8129 .687 (17.4) .656 (16.7) 8169 .750 (19.1) .218 (5.5) .875 (22.2) .750 (19.1) 8130 .750 (19.1) .687 (17.4) 8170 .812 (20.6) .281 (7.1) .937 (23.8) .812 (20.6) 8131 .812 (20.6) .718 (18.2) 8171 .875 (22.2) .281 (7.1) .968 (24.6) .812 (20.6) 8132 .875 (22.2) .750 (19.1) . 060 (1.52) .750 (19.1) 8172 .937 (23.8) .281 (7.1) 1.000 (25.4) .937 (23.8) 8133 .937 (23.8) .781 (19.8) 8134 1.000 (25.4) .812 (20.6) 8173 1.000 (25.4) .281 (7.1) 1.062 (27.0) 1.000 (25.4) ® 126 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED METAL CABLE CLAMPS CABLE CLAMPS & TIES CUSHIONED CABLE CLAMPS NYLON CABLE CLAMPS • Ideal for securing in rugged applications Ideal for securing, insulating and routing cable wiring, piping, tubing, components • These cushioned cable clamps secure and fibre optics. tightly and protect against shock and MATERIAL: .050 (1.27) Nylon 6/6, White vibration .218 L [5.6] W H .250 [6.4] L D .500 [12.7] CAT. DL W H NO. FOR DIA. CTR TO CTR WIDTH HOLE 7620 .125 (3.2) .325 (8.3) .375 (9.5) .140 (3.6) .203 [5.2] 7621 .125 (3.2) .325 (8.3) .375 (9.5) .203 (5.2) DIA. 7622 .187 (4.7) .380 (9.7) .375 (9.5) .140 (3.6) 7623 .187 (4.7) .380 (9.7) .375 (9.5) .203 (5.2) 7624 .250 (6.4) .410 (10.4) .375 (9.5) .140 (3.6) 7625 .250 (6.4) .410 (10.4) .375 (9.5) .203 (5.2) 7626 .312 (7.9) .445 (11.3) .375 (9.5) .140 (3.6) D 7627 .312 (7.9) .445 (11.3) .375 (9.5) .203 (5.2) 7628 .375 (9.5) .475 (12.1) .375 (9.5) .140 (3.6) 7629 .375 (9.5) .475 (12.1) .375 (9.5) .203 (5.2) MATERIAL: .032 (0.81) Stainless Steel 7630 .437 (11.1) .525 (13.3) .375 (9.5) .140 (3.6) Cushion: EPDM Rubber 7631 .437 (11.1) .525 (13.3) .375 (9.5) .203 (5.2) CAT. DL 7632 .500 (12.7) .550 (14.0) .375 (9.5) .140 (3.6) NO. FOR DIA. CTR TO CTR 7633 .500 (12.7) .550 (14.0) .375 (9.5) .203 (5.2) 8090 .250 (6.4) .711 (18.1) 7634 .562 (14.3) .625 (15.9) .500 (12.7) .203 (5.2) 8091 .375 (9.5) .500 (12.7) 7635 .625 (15.9) .660 (16.8) .500 (12.7) .203 (5.2) 8092 .500 (12.7) .562 (14.3) 7636 .750 (19.1) .785 (19.9) .500 (12.7) .203 (5.2) 8093 .625 (15.9) .718 (18.2) 7637 .875 (22.2) .845 (21.5) .500 (12.7) .203 (5.2) 8094 .750 (19.1) .781 (19.8) 7638 1.000 (25.4) .910 (23.1) .500 (12.7) .203 (5.2) 8095 .875 (22.2) .843 (21.4) 7639 1.125 (28.6) .970 (24.6) .500 (12.7) .203 (5.2) 8096 1.000 (25.4) .906 (23.0) 7640 1.250 (31.8) 1.060 (26.9) .500 (12.7) .203 (5.2) CABLE TIE ROUTING CLIP NYLON CABLE TIES These clips snap into PC Boards or Panel chassis and are ideal for securing cable Popular sizes and strengths to meet common cable tie requirements. Injection wiring, piping, tubing, components and fibre optics when used with cable ties. molded with one piece construction for strength and reliability. Easily installed by hand. Optional installation tool available, tightens and flush cuts cable tie. .380 [9.7] L .065 [1.65] .220 [5.6] .190 [4.9] W .400 [10.2] T FOR .062 [1.57] THICK PANEL MATERIAL: Natural Nylon 6/6, UL Rated 94V-2 .320 [8.2] TENSILE FOR L W T CAT. STRENGTH BUNDLE LENGTH WIDTH THICKNESS NO. (Min. Bundle) DIA. (Max.) (Approx.) (Approx.) (Approx.) 8865 18 lbs 1.000 (25.4) 4.250 (108.O) .100 (2.54) .045 (1.14) 8866 18 lbs 2.000 (50.8) 8.000 (203.2) .100 (2.54) .045 (1.14) Recommended Mtg. Hole .187 (4.8) diameter. 8867 40 lbs 1.250 (31.8) 6.000 (152.4) .140 (3.56) .050 (1.27) 8868 50 lbs 1.750 (44.5) 7.500 (190.5) .190 (4.83) .055 (1.40) MATERIAL: Nylon 6/6, UL Rated 94V-2 8869 120 lbs 4.000 (101.6) 14.500 (368.3) .190 (4.83) .055 (1.40) CAT. NO. 8860 8870 Hand Operated Cable Tie Installation Tool for 18lb to 50lb Ties ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 127 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED STEEL HOLE PLUGS NYLON HOLE PLUGS Excellent spring retention. Plugs will cover chassis holes, wiring outlets, access holes Closes unused chassis holes quickly and economically. Plugs are abrasion and or unused openings. vibration resistant. .062 [1.57] B A C .032 [0.81] B .093 [2.36] .125 [3.2] C .062 [1.57] MATERIAL: Nylon 6/6, Matte Finish, Black MATERIAL: Steel, Nickel Plate CAT. HOLE PANEL CAT. HOLE PANEL NO. DIAMETER THICKNESS B C NO. DIAMETER THICKNESS A B C PRONGS 8600 .250 (6.4) .062 (1.57) .312 (7.9) .312 (7.9) 7600 .250 (6.4) .031-.062 (.81-1.57) .406 (10.3) .234 (5.9) .062 (1.57) 6 7601 .312 (7.9) .047-.078 (1.19-1.98) .437 (11.1) .250 (6.4). 062 (1.57) 6 8601 .312 (7.9) .062 (1.57) .375 (9.5) .312 (7.9) 7602 .375 (9.5) .047-.062 (1.19-1.57) .500 (12.7) .234 (5.9) .062 (1.57) 6 8602 .375 (9.5) .125 (3.2) .468 (11.9) .406 (10.3) 7603 .500 (12.7) .031-.062 (.81-1.57) .656 (16.7) .281 (7.1) .078 (1.98) 8 8603 .500 (12.7) .125 (3.2) .578 (14.7) .406 (10.3) 7604 .625 (15.9) .062-.093 (1.57-2.36) .812 (20.6) .296 (7.5) .078 (1.98) 8 8604 .625 (15.9) .125 (3.2) .734 (18.6) .406 (10.3) 7605 .750 (19.1) .062-.093 (1.5 -2.36) .921 (23.4) .296 (7.5) .078 (1.98) 12 8605 .750 (19.1) .125 (3.2) .921 (23.4) .406 (10.3) 8606 .875 (22.2) .125 (3.2) 1.015 (25.8) .453 (11.5) 7606 .875 (22.2) .062-.093 (1.57-2.36) 1.062 (27.0) .296 (7.5) .062 (1.57) 12 7607 1.000 (25.4) .062-.156 (1.57-3.9) 1.140 (29.0) .328 (8.3) .093 (2.36) 12 8607 1.000 (25.4) .125 (3.2) 1.203 (30.6) .453 (11.5) 8608 1.125 (28.6) .125 (3.2) 1.218 (30.9) .453 (11.5) 7608 1.125 (28.6) .031-.125 (.79-3.2) 1.312 (33.3) .343 (8.7) .093 (2.36) 12 8609 1.250 (31.8) .125 (3.2) 1.375 (34.9) .453 (11.5) 7609 1.250 (31.8) .062-.093 (1.57-2.36) 1.437 (36.5) .343 (8.7) .093 (2.36) 12 8610 1.375 (34.9) .125 (3.2) 1.500 (38.1) .453 (11.5) 7610 1.375 (34.9) .031-.125 (.79-3.2) 1.562 (39.7) .406 (10.3) .078 (1.98) 12 8611 1.500 (38.1) .125 (3.2) 1.671 (42.4) .453 (11.5) 7611 1.500 (38.1) .031-.062 (.79-1.57) 1.640 (41.7) .406 (10.3) .093 (2.36) 12 NYLON VENT PLUGS Used to cover chassis holes while allowing air flow for ventilation. .062 [1.57] B .032 [0.81] •Snaps into .032 (.81) to .125 (3.2) thick panels. CAT. HOLE .093 [2.36] NO. DIAMETER B C .125 [3.2] 8612 .875 (22.2) 1.015 (25.8) .453 (11.5) C .062 [1.57] 8613 1.000 (25.4) 1.218 (30.9) .453 (11.5) MATERIAL: Nylon 6/6, Matte Finish, Black NYLON INSULATING BUSHINGS NYLON SPLIT BUSHINGS Snaps into panel hole to provide protection for Designed to be assembled into holes that already contain wire or cable. Versatile .062 [1.57] A wire, cable and tubing from sharp uneven edges. bushing can be used on all chassis from .032 (.81) to .125 (3.2). .032 [0.81] .062 [1.57] A .032 [0.81] .093 [2.36] B .125 [3.2] .062 [1.57] C MATERIAL: Nylon 6/6, Black .093 [2.36] B .125 [3.2] HOLE MAXIMUM A B C .406 CAT. SIZE CHASSIS INSIDE HEAD OVERALL .062 [1.57] [10.3] NO. REQUIRED THICKNESS DIAMETER DIAMETER HEIGHT 8470 .250 (6.4) .062 (1.57) .125 (3.2) .312 (7.9) .312 (7.9) 8471 .312 (7.9) .062 (1.57) .187 (4.7) .375 (9.5) .312 (7.9) 8472 .375 (9.5) .125 (3.2) .250 (6.4) .468 (11.9) .406 (10.3) 8473 .437 (11.1) .125 (3.2) .312 (7.9) .531 (13.5) .406 (10.3) 8474 .500 (12.7) .125 (3.2) .375 (9.5) .578 (14.7) .406 (10.3) 8475 .562 (14.3) .125 (3.2) .437 (11.1) .656 (16.7) .406 (10.3) MATERIAL: Nylon 6/6, Black 8476 .625 (15.9) .125 (3.2) .500 (12.7) .718 (18.2) .406 (10.3) HOLE A B 8477 .750 (19.1) .125 (3.2) .562 (14.3) .843 (21.4) .406 (10.3) CAT. SIZE INSIDE HEAD 8478 .875 (22.2) .125 (3.2) .625 (15.9) .953 (24.2) .453 (11.5) NO. REQUIRED DIAMETER DIAMETER 8479 1.000 (25.4) .125 (3.2) .750 (19.1) 1.125 (28.6) .453 (11.5) 8490 .375 (9.5) .265 (6.7) .421 (10.7) 8480 1.187 (30.1) .125 (3.2) .937 (23.8) 1.312 (33.3) .453 (11.5) 8491 .500 (12.7) .312 (7.9) .562 (14.3) 8481 1.250 (31.8) .125 (3.2) .937 (23.8) 1.359 (34.5) .453 (11.5) 8492 .562 (14.3) .390 (9.9) .640 (16.3) 8482 1.375 (34.9) .125 (3.2) 1.000 (25.4) 1.468 (37.3) .453 (11.5) 8493 .625 (15.9) .453 (11.5) .687 (17.4) 8483 1.500 (38.1) .125 (3.2) 1.062 (27.0) 1.609 (40.9) .453 (11.5) 8494 .750 (19.1) .546 (13.9) .796 (20.2) 8484 1.750 (44.5) .125 (3.2) 1.375 (34.9) 1.875 (47.6) .453 (11.5) 8495 .875 (22.2) .671 (17.0) .921 (23.4) 8485 2.000 (50.8) .125 (3.2) 1.625 (41.3) 2.125 (54.0) .453 (11.5) 8496 1.000 (25.4) .796 (20.2) 1.062 (27.0) 8486 2.500 (63.5) .250 (6.4) 1.968 (50.0) 2.656 (67.5) .718 (18.2) ® 128 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED HOLE PLUGS & BUSHINGS GROMMETS & BUSHINGS ANTI-VIBRATION GROMMETS Anti-vibration grommets are designed for noise suppression in office or lab equipment. Additionally, they isolate sensitive instrumentation from unpredictable vibration and shock. The fingers of the grommets provide the flex needed to dampen unwanted noise and vibration. Specially designed shoulder screws are designed to provide the correct spacing. D L THREAD B H A I.D. MATERIAL: ROUND HEAD HEX HEAD Isolator: EPDM Rubber O.D. Screw supplied unassembled with isolator Shoulder Screw: Steel, Nickel Plate BLACK BLUE SHOULDER SCREW O.D. I.D. A B CAT. CAT. OUTSIDE INSIDE H PANEL MTG. LENGTH NO. NO. DIAMETER DIAMETER HEIGHT THICK HOLE (L) THREAD D HEAD 765 766 .379 (9.6) .154 (3.9) .228 (5.8) .063 (1.6) .250 (6.4) .189 (4.8) 6-32 .250 (6.4) 769 770 .377 (9.6) .161 (4.1) .298 (7.6) .125 (3.2) .250 (6.4) .252 (6.4) 6-32 .300 (7.6) Hex 775 776 .551 (14.0) .191 (4.9) .319 (8.1) .063 (1.6) .375 (9.5) .318 (8.0) 6-32 .394 (10.0) 767 768 .379 (9.6) .154 (3.9) .228 (5.8) .047 (1.2) .250 (6.4) .197 (5.0) M3 .394 (10.0) 771 772 .411 (11.2) .181 (4.6) .209 (5.3) .031 (0.8) .315 (8.0) .197 (5.0) M3 .394 (10.0) Round 773 774 .551 (14.0) .191 (4.9) .291 (7.4) .047 (1.2) .375 (9.5) .252 (6.4) M3 .394 (10.0) RUBBER GROMMETS FLEXIBLE GROMMETING Ideal for electrical insulation and mechanical damping. Ideal for maintenance, short-run production, R&D or prototyping. Supplied in 25 ft. rolls. Make your own grommets to fit any size or shape required. W O.D. I.D. A H H B A MATERIAL: Nylon 6/6, Black MATERIAL: Rubber, BUNA N CAT. MAX W HA I.D. B A O.D. NO. PANEL WIDTH HEIGHT THICK CAT. INSIDE MTG. PANEL OUTSIDE H 8615 .052 (1.32) .139 (3.5) .190 (4.8) .028 (0.7) NO. DIAMETER HOLE THICKNESS DIAMETER HEIGHT 8616 .085 (2.16) .182 (4.6) .200 (5.1) .040 (1.02) 730 .125 (3.2) .187 (4.7) .062 (1.57) .312 (7.9) .187 (4.7) 8617 .125 (3.18) .232 (5.9) .220 (5.6) .040 (1.02) 733 .125 (3.2) .250 (6.4) .062 (1.57) .343 (8.7) .187 (4.7) 734 .125 (3.2) .437 (11.1) .062 (1.57) .625 (15.9) .187 (4.7) 735 .125 (3.2) .375 (9.5) .093 (2.36) .500 (12.7) .312 (7.9) “UNIVERSAL” RUBBER GROMMET 736 .187 (4.7) .312 (7.9) .062 (1.57) .437 (11.1) .218 (5.5) 737 .187 (4.7) .281 (7.2) .093 (2.36) .437 (11.1) .218 (5.5) • Designed to adjust to different 738 .250 (6.4) .437 (11.1) .062 (1.57) .625 (15.9) .187 (4.7) cable diameters from .125 (3.2) 739 .250 (6.4) .375 (9.5) .062 (1.57) .562 (14.3) .250 (6.4) to .312 (7.9). 740 .250 (6.4) .375 (9.5) .093 (2.36) .500 (12.7) .250 (6.4) B • Self-adjusting membrane .060 [1.52] 741 .312 (7.9) .562 (14.3) .062 (1.57) .812 (20.6) .312 (7.9) forms a dust resistant seal. H 742 .312 (7.9) .437 (11.1) .062 (1.57) .625 (15.9) .281 (7.1) 743 .312 (7.9) .437 (11.1) .093 (2.36) .625 (15.9) .312 (7.9) O.D. 744 .375 (9.5) .625 (15.9) .062 (1.57) .875 (22.2) .312 (7.9) 745 .375 (9.5) .500 (12.7) .062 (1.57) .625 (15.9) .250 (6.4) I.D. 732 .437 (11.1) .562 (14.3) .062 (1.57) .750 (19.1) .250 (6.4) EXPANDABLE MEMBRANE 746 .437 (11.1) .687 (17.4) .062 (1.57) .937 (23.8) .312 (7.9) 747 .500 (12.7) .812 (20.6) .062 (1.57) 1.062 (27.0) .312 (7.9) "A" DIA HOLE. 748 .500 (12.7) 1.250 (31.8) .062 (1.57) 1.500 (38.1) .250 (6.4) 749 .500 (12.7) .750 (19.1) .093 (2.36) .968 (24.6) .281 (7.1) 750 .562 (14.3) .812 (20.6) .062 (1.57) 1.062 (27.0) .312 (7.9) MATERIAL: Thermoplastic Rubber, Black 752 .625 (15.9) .875 (22.2) .062 (1.57) 1.125 (28.6) .312 (7.9) CAT. O.D. I.D. A B H 753 .625 (15.9) 1.250 (31.8) .062 (1.57) 1.500 (38.1) .250 (6.4) NO. OUTSIDE INSIDE DIA. DIA. HOLE MTG HOLE HEIGHT 755 .750 (19.1) 1.062 (27.0) .062 (1.57) 1.375 (34.9) .375 (9.5) 777 .650 (16.32) .380 (9.7) .090 (2.3) .500 (12.7) .250 (6.4) 756 .750 (19.1) 1.437 (36.5) .062 (1.57) 1.812 (46.0) .375 (9.5) 778 1.25 (31.8) .810 (20.6) .160 (4.0) 1.000 (25.4) .370 (9.4) 757 .875 (22.2) 1.250 (31.8) .062 (1.57) 1.625 (41.3) .437 (11.1) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 129 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED ADHESIVE BUMPERS Applies quicky and easily. Prevents nicks, scratches, scuffs, vibration, slippage and noise. Easy peel and stick mounting. Crack resistant. High coefficient of friction. Sold in sheets. FLAT DOMED 780 Series 783 SERIES DIAMETER DIAMETER HEIGHT HEIGHT SELF-ADHESIVE SURFACE SELF-ADHESIVE SURFACE 781 Series 784 SERIES 782 Series 785 SERIES MATERIAL: Molded Polyurethane MATERIAL: Molded Polyurethane BLACK CLEAR BLACK CLEAR CAT. NO. CAT. NO. DIAMETER HEIGHT PARTS/SHEET CAT. NO. CAT. NO. DIAMETER HEIGHT PARTS/SHEET 780-B 780-C .375 (9.5) .125 (3.2) 300 783-B 783-C .250 (6.4) .062 (1.6) 578 781-B 781-C .500 (12.7) .060 (1.5) 200 784-B 784-C .335 (8.5) .085 (2.2) 450 782-B 782-C .500 (12.7) .140 (3.6) 200 785-B 785-C .440 (11.2) .200 (5.1) 242 RECESSED BUMPERS Provides excellent traction and shock absorbing qualities. available with or without Mold-in Washers. C C D C D D B B B FIG. 1 E FIG. 2 Mold-In Washer E FIG. 3 Mold-In Washer E A A A MATERIAL: Rubber, BUNA S (Figs. 1 & 2), EPDN MATERIAL: Rubber, BUNA S (Figs. 1 & 2), EPDN MATERIAL: EPDN Rubber CAT. SCREW NO. FIG. A B C D E SIZE 720 1 .500 (12.7) .250 (6.4) .250 (6.4) .187 (4.7) .125 (3.2) # 4 721 1 .625 (15.9) .312 (7.9) .250 (6.4) .187 (4.7) .125 (3.2) # 4 722 1 .718 (18.2) .437 (11.1) .250 (6.4) .218 (5.5) .125 (3.2) # 4 723 2 .937 (23.8) .375 (9.5) .375 (9.5) .218 (5.5) .187 (4.7) # 8 724* 3 .687 (17.4) .250 (6.4) .343 (8.7) .125 (3.2) .155 (3.9) # 6 725* 3 .875 (22.2) .312 (7.9) .406 (10.3) .187 (4.7) .187 (4.7) # 8 726* 3 1.062 (27.0) .437 (11.1) .468 (11.9) .234 (5.9) .200 (5.1) # 10 727 3 .562 (14.3) .375 (9.5) .218 (5.5) .187 (4.7) .115 (2.9) # 4 728 3 .750 (19.1) .437 (11.1) .265 (6.7) .250 (6.4) .148 (3.8) # 6 729 3 .937 (23.8) .625 (15.9) .359 (9.1) .328 (8.3) .174 (4.4) # 8 SELF-LOCKING BUMPER FOOT • A unique easy-to-install self-locking bumper foot • Two piece assembly, furnished pre-assembled • Vibration absorbing and skid resistant • Mounts without screws or tools .980 [24.9] DIA. Recommended Mounting Hole: .305 (7.8) diameter .312 [7.9] .425 [10.8] LOCKING PIN (SHOWN PARTIALLY INSERTED) .200 [5.1] .910 [23.1] DIA. MATERIAL: Foot: Santoprene, Black Pin: Polypropylene, Black CAT. NO. 717 ® 130 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED RUBBER BUMPERS WASHERS FLAT WASHERS – NYLON & FIBRE NYLON RETAINING WASHERS Retaining Washers are similar to our standard washers, but with a specially configured ID O.D. designed to grip the screw shank. The washer remains attached to the screw, for quick, easy W I.D. assembly. MATERIAL: Fibre: Commercial Grade per ASTM D710 Nylon: Grade 6/6 per ASTM D4066 W THICKNESS W .032 (.81) .047 (1.19) .062 (1.57) A MATERIAL I.D. O.D. CAT. NO. CAT. NO. CAT. NO. .187 (4.8) 3111 3148 3366 .098 (2.49) I.D. O.D. FIBRE .250 (6.4) 3112 3149 3367 #2 .312 (7.9) 3113 3150 3194 .187 (4.8) 3114 3151 3356 .098 (2.49) NYLON .250 (6.4) 3347* 3152 3357* #2 .312 (7.9) 3115 3153 3195 .250 (6.4) 3116 3154 3368 .120 (3.05) FIBRE .312 (7.9) 348 3155 3196 #4 .375 (9.5) 3117 3156 3197 MATERIAL: .250 (6.4) 3348 345 3358 .120 (3.05) Nylon, 6/6 UL Rated 94V-0 NYLON .312 (7.9) 3359 3157 3198 #4 .375 (9.5) 3118 3158 3200 HEIGHT (H) .250 (6.4) 3119 3159 3369 ( ) ( ) .032 0.81 .062 1.57 SCREW .140 (3.56) FIBRE .312 (7.9) 3120 3160 3370 CAT. NO. CAT. NO. SIZE A I.D. O.D. #6 .375 (9.5) 3121 3161 3201 2244 2284 #2 (M2) .115 (2.9) .078 (1.9) .203 (5.2) .250 (6.4) 3122 3162 3360 .140 (3.56) 2245 2285 #4 .156 (3.9) .102 (2.6) .256 (6.7) NYLON .312 (7.9) 3349 346 3361 #6 2246 2286 #6 (M3.5) .198 (5.0) .128 (3.3) .328 (8.3) .375 (9.5) 3123 3163 3202 ( ) 2247 2287 .152 3.8 .390 (9.9) .312 (7.9) 3124 3164 3203 ( ) #8 (M4) .235 5.9 .171 (4.34) 2248 — .135 (3.4) .390 (9.9) FIBRE .375 (9.5) 3125 3165 3372 #8 .453 (11.5) .437 (11.1) 3126 3166 3204 2249 — ( ) .312 (7.9) 3127 3167 3205 — 2290 #10 .227 (7.0) .177 4.5 .500 (12.7) .171 (4.34) NYLON .375 (9.5) 3350 3168 3363 — 2291 .630 (16.0) #8 .437 (11.1) 3128 3169 3206 2252 2292 #1/4 (M6) .375 (9.5) .234 (5.9) .593 (15.1) .312 (7.9) 349 3170 3207 2253 2293 #3/8 .564 (14.3) .350 (8.9) .890 (22.6) .375 (9.5) 3129 3171 3208 .196 (4.98) FIBRE .437 (11.1) 3130 3172 3209 #10 STEEL FLAT WASHERS .500 (12.7) 3131 3173 3210 .312 (7.9) 3364 3174 3211 .375 (9.5) 3352 3175 3212 .196 (4.98) NYLON .437 (11.1) 3132 3176 3213 #10 .500 (12.7) 3133 3177 3214 .437 (11.1) 3134 3178 3215 .500 (12.7) 3135 3179 3373 .260 (6.60) FIBRE .625 (15.9) 3136 3180 3216 1/4” .750 (19.1) 3137 3181 3217 O.D. .437 (11.1) 3138 3182 3218 .500 (12.7) 3353 3183 3365 .260 (6.60) NYLON I.D. .625 (15.9) 3139 3184 3219 1/4” W .750 (19.1) 3140 3185 3220 .500 (12.7) 3141 3186 3221 .625 (15.9) 3142 3187 3222 .385 (9.65) MATERIAL: Steel, Zinc Plate FIBRE .750 (19.1) 3143 3188 3223 3/8” CAT. NO. I.D. O.D. W SCREW SIZE 1.000 (25.4) 3144 3189 3224 4692 .128 (3.3) .281 (7.1) .025 (.63) .500 (12.7) 3145 3190 3225 #4 (M3) 7235-1 .120 (3.1) .220 (5.6) .032 (.81) .625 (15.9) 3354 3191 3226 .385 (9.65) NYLON 4699 .147 (3.7) .373 (9.5) .031 (.80) #6 (M3.5) .750 (19.1) 3146 3192 3227 3/8” 4703 .200 (5.1) .436 (11.1) .033 (.84) #10 (M4) 1.000 (25.4) 3147 3193 3228 1719-1 .391 (9.9) 1.500 (38.1) .094 (2.4) 3/8” * .090 (2.3) I.D. INTERNAL TOOTH WASHERS STEEL LOCK WASHERS W O.D. O.D. I.D. MATERIAL: Steel, Zinc Plate I.D. W CAT. NO. I.D. O.D. W SCREW SIZE 4693 .177 (3.0) .205 (5.2) .031 (.78) #4 (M3) 7235-2 .177 (3.0) .197 (5.0) .025 (.63) MATERIAL: Phoshor Bronze - Nickel Plate 4700 .144 (3.7) .250 (6.4) .033 (.84) #6 (M3.5) CAT. NO. I.D. O.D. W SCREW SIZE 1477 .195 (5.0) .320 (8.1) .047 (1.2) #10 (M4) 11362-5 .226 (5.7) .402 (10.2) .020 (.51) #12 (M5) 1476 .256 (6.5) .479 (12.2) .074 (1.9) 1/4” (M6) 1485 .321 (8.2) .586 (14.8) .078 (2.0) 5/16” (M8) 4691 .261 (6.6) .469 (11.9) .025 (.63) 1/4” (M6) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 131 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED FIBRE SHOULDER WASHERS HEX MACHINE NUTS MATERIAL: Nylon 6/6 (RoHS Compliant) MATERIAL: Fibre, Commercial Grade per ASTM D710 Steel, Zinc Plate (Non-RoHS Compliant) Note: RoHS Compliant finishes available on CAT. SCREW special order NO. L O.D. B I.D. S.D. SIZE 3229 .025 (.64) .250 (6.4) .047 (1.2) .093 (2.4) .123 (3.1) #2 3061 .025 (.64) .250 (6.4) .047 (1.2) .093 (2.4) .156 (4.0) 344 .015 (.38) .312 (7.9) .062 (1.57) .125 (3.2) .203 (5.2) STEEL NYLON CAT. NO. CAT. NO. HEX THREAD 343 .025 (.64) .312 (7.9) .062 (1.57) .125 (3.2) .203 (5.2) 4694 — 187 (4.7) 3062 .031 (.79) .250 (6.4) .031 (.79) .115 (2.9) .187 (4.7) 4-40 #4 9600 9605 .250 (6.4) 3230 .031 (.79) .281 (7.1) .062 (1.57) .115 (2.9) .175 (4.4) HEX 4701 — .250 (6.4) 6-32 3231 .031 (.79) .312 (7.9) .062 (1.57) .120 (3.1) .180 (4.6) 9602 9606 .312 (7.9) THREAD 4698 .031 (.79) .250 (6.4) .062 (1.57) .140 (3.6) .187 (4.7) 9603 — .250 (6.4) 8-32 3064 .031 (.79) .312 (7.9) .062 (1.57) .140 (3.6) .187 (4.7) 9604 9607 312 (7.9) 3232 .031 (.79) .375 (9.5) .062 (1.57) .140 (3.6) .210 (5.3) 4705 9608 .375 (9.5) 10-32 #6 A 3233 .031 (.79) .375 (9.5) .062 (1.57) .140 (3.6) .240 (6.1) 4713 — .430 (10.9) .250-28 3234 .031 (.79) .500 (12.7) .062 (1.57) .140 (3.6) .240 (6.1) 4716 — .500 (12.7) .312-24 3065 .031 (.79) .375 (9.5) .062 (1.57) .170 (4.3) .246 (6.2) 3066 .031 (.79) .417 (10.6) .062 (1.57) .170 (4.3) .210 (5.3) C A L 3235 .031 (.79) .312 (7.9) .062 (1.57) .170 (4.3) .218 (5.5) METRIC MACHINE NUTS #8 3236 .031 (.79) .375 (9.5) .062 (1.57) .170 (4.3) .215 (5.5) B 3237 .031 (.79) .500 (12.7) .062 (1.57) .170 (4.3) .240 (6.1) 4702 .031 (.79) .375 (9.5) .062 (1.57) .194 (4.9) .308 (7.8) 3238 .031 (.79) .375 (9.5) .062 (1.57) .194 (4.9) .240 (6.1) #10 3239 .031 (.79) .500 (12.7) .062 (1.57) .196 (5.0) .240 (6.1) 4711 .031 (.79) .500 (12.7) .062 (1.57) .253 (6.4) .308 (7.8) .250-20 3240 .031 (.79) .625 (15.9) .062 (1.57) .265 (6.7) .359 (9.1) 3069 .031 (.79) .625 (15.9) .062 (1.57) .385 (9.8) .498 (12.6) MATERIAL: Nylon 6/6 UL Rated 94V-2 .375-24 3241 .031 (.79) .750 (19.1) .062 (1.57) .385 (9.8) .498 (12.6) Steel, Nickel Plate HEX STEEL NYLON THREAD CAT. NO. CAT. NO. HEX THREAD / NYLON SHOULDER WASHER BUSHINGS 4707 4687 5.00 mm M2.5 4708 4688 5.50 mm M3 4709 4689 7.00 mm M4 MATERIAL: Nylon 6/6 per ASTM D4066 CAT. SCREW NO. L O.D. B I.D. S.D. SIZE BLIND CAPTIVE NUTS - PRESS FIT 7680 .025 (.64) .260 (6.6) .030 (.76) .095 (2.4) .154 (3.9) MOUNT CHASSIS, PANELS, HEAT SINKS, SOCKETS 3051 .125 (3.2) .181 (4.6) .047 (1.2) .090 (2.3) .120 (3.1) • Easy Assembly • Dampens Vibration 3101 .187 (4.8) .181 (4.6) .047 (1.2) .090 (2.3) .120 (3.1) #2 • Eliminates Insulating Washer • Hi-Dielectric Strength 3052 .250 (6.4) .181 (4.6) .047 (1.2) .090 (2.3) .120 (3.1) 3049* .031 (.79) .218 (5.5) .040 (1.0) .115 (2.9) .135 (3.4) A unique reusable fastener made of NYLON which contains a 7681 .047 (1.2) .250 (6.4) .032 (.81) .115 (2.9) .185 (4.7) threaded brass nut. Finger pressure or light tap seals it in a 3053 .093 (2.4) .235 (6.0) .047 (1.2) .115 (2.9) .145 (3.7) pre-drilled hole. The nut is drawn up causing a Nylon bulge #4 3102 .125 (3.2) .235 (6.0) .047 (1.2) .115 (2.9) .145 (3.7) behind the workpiece. Screw may be removed or replaced. 3103 .187 (4.7) .235 (6.0) .047 (1.2) .115 (2.9) .145 (3.7) 340 .250 (6.4) .235 (6.0) .047 (1.2) .115 (2.9) .145 (3.7) 7682 .032 (.81) .385 (9.8) .062 (1.57) .145 (3.7) .240 (6.1) A 7683 .032 (.81) .250 (6.4) .062 (1.57) .140 (3.6) .187 (4.7) 7684 .032 (.81) .312 (7.9) .062 (1.57) .140 (3.6) .187 (4.7) 3054 .125 (3.2) .290 (7.4) .047 (1.19) .140 (3.6) .170 (4.3) #6 3104 .187 (4.7) .290 (7.4) .047 (1.19) .140 (3.6) .170 (4.3) C 341 .250 (6.4) .290 (7.4) .047 (1.19) .140 (3.6) .170 (4.3) A 3055 .500 (12.7) .290 (7.4) .047 (1.19) .140 (3.6) .170 (4.3) L 7685 .032 (.81) .375 (9.5) .032 (.81) .171 (4.3) .250 (6.4) T 3056 .140 (3.6) .344 (8.7) .062 (1.57) .171 (4.3) .205 (5.2) B 3105 .250 (6.4) .344 (8.7) .062 (1.57) .171 (4.3) .205 (5.2) #8 A 342 .375 (9.5) .344 (8.7) .062 (1.57) .171 (4.3) .205 (5.2) 3106 .500 (12.7) .344 (8.7) .062 (1.57) .171 (4.3) .205 (5.2) 7686 .032 (.81) .375 (9.5) .062 (1.57) .196 (5.0) .308 (7.8) Shown Installed H 3107 .093 (2.36) .438 (11.1) .062 (1.57) .200 (5.1) .260 (6.6) (Screw not supplied) 3108 .250 (6.4) .399 (10.1) .062 (1.57) .200 (5.1) .260 (6.6) #10 3057 .500 (12.7) .399 (10.1) .062 (1.57) .200 (5.1) .260 (6.6) 3058 .750 (19.1) .399 (10.1) .062 (1.57) .200 (5.1) .260 (6.6) 7687 .032 (.81) .437 (11.1) .032 (.81) .253 (6.4) .310 (7.9) 7688 .078 (1.98) .492 (12.7) .032 (.81) .260 (6.7) .312 (7.9) MATERIAL: Molded Nylon with Brass threaded insert 3059 .187 (4.7) .513 (13.0) .062 (1.57) .260 (6.7) .312 (7.9) H IDEAL .250-20 HOLE SHEET 3109 .250 (6.4) .513 (13.0) .062 (1.57) .260 (6.7) .312 (7.9) CAT. NO. THREAD SIZE REQ’D. THICKNESS A T 3110 .375 (9.5) .513 (13.0) .062 (1.57) .260 (6.7) .312 (7.9) 4341 4-40 .250 (6.4) .047 (1.2) .312 (7.9) .030 (.76) 3060 .500 (12.7) .513 (13.0) .062 (1.57) .260 (6.7) .312 (7.9) 4342 6-32 .312 (7.9) .078 (1.9) .375 (9.5) .030 (.76) * Black 4343 8-32 .406 (10.3) .093 (2.4) .500 (12.7) .030 (.76) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 132 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED WASHERS & NUTS MACHINE SCREWS MACHINE SCREWS Suited for a variety of fastening applications to assure firm, electrical and BINDING HEAD FLAT HEAD PAN HEAD mechanical connections. Flat Head styles for use where fasteners cannot STEEL NYLON STEEL NYLON STEEL NYLON protrude above mating surfaces. Pan Head style to replace round head THREAD LENGTH CAT. NO. CAT. NO. CAT. NO. CAT. NO. CAT. NO. CAT. NO. type for cosmetic enhancement and smooth surface area uses. .250 (6.4) 9455 — 9555 — 9355 — 2-56 .500 (12.7) 9456 — 9556 — 9356 — For Metric Hardware Refer to page 55. .750 (19.1) 9457 — 9557 — 9357 — MATERIAL: Steel, Zinc Plate (Non-RoHS Compliant) .250 (6.4) 9400 9427 9500 9527 9300 9327 Note: RoHS Compliant finishes available on special order .375 (9.5) 9401 9428 9501 9528 9301 9328 Nylon 6/6 (RoHS Compliant) 4-40 .500 (12.7) 9402 9429 9502 9529 9302 9329 .625 (15.9) 9403 9430 9503 9530 9303 9330 .750 (19.1) 9404 9431 9504 9531 9304 9331 1.000 (25.4) 9405 9432 9505 9532 9305 9332 .187 (4.7) 9406 9433 9506 9533 9306 9333 .250 (6.4) 9407 9434 9507 9534 9307 9334 .375 (9.5) 9408 9435 9508 9535 9308 9335 .500 (12.7) 9409 9436 9509 9536 9309 9336 6-32 .625 (15.9) 9410 9437 9510 9537 9310 9337 .750 (19.1) 9411 9438 9511 9538 9311 9338 1.000 (25.4) 9412 9439 9512 9539 9312 9339 1.250 (31.8) 9413 9440 9513 9540 9313 9340 2.000 (50.8) 9414 9441 9514 9541 9314 9341 .250 (6.4) 9416 9443 9516 9543 9316 9343 .375 (9.5) 9417 9444 9517 9544 9317 9344 .500 (12.7) 9418 9445 9518 9545 9318 9345 8-32 .625 (15.9) 9419 9446 9519 9546 9319 9346 .750 (19.1) 9420 9447 9520 9547 9320 9347 1.000 (25.4) 9421 9448 9521 9548 9321 9348 1.250 (31.8) 9422 9449 9522 9549 9322 9349 .500 (12.7) 9423 9450 9523 9550 9323 9350 L L L 10-32 .750 (19.1) 9424 9451 9524 9551 9324 9351 THREAD THREAD THREAD 1.000 (25.4) 9425 9452 9525 9552 9325 9352 Binding Head Flat Head Pan Head 1.500 (38.1) 9426 9453 9526 9553 9326 9353 SELF TAPPING SCREWS METRIC SCREWS Choice of: Steel, Zinc Plate • Nylon: 6/6, UL Rated 94V-2 Highly versatile screw, used in wood, fiberglass and metal where machine thread inserts are not furnished. STEEL NYLON 6/6 CAT. NO. L CAT. NO. M2.5 THREAD 29301 6.00 29331 29304 12.00 29334 29306 16.00 29336 • Slotted drive, hex head M3 THREAD 29311 6.00 29341 29314 12.00 29344 THREAD LENGTH CAT. NO. L 29316 16.00 29346 No. 4 .375 (9.5) 9575 THREAD 29318 25.00 29348 .375 (9.5) 9576 No. 6 M4 THREAD .500 (12.7) 9577 L 29321 6.00 29351 .375 (9.5) 9578 THREAD No. 8 29324 12.00 29354 .500 (12.7) 9579 29326 16.00 29356 MATERIAL: Steel, Zinc Plate (Non-RoHS Compliant) .375 (9.5) 9580 No. 10 29328 25.00 29358 Note: RoHS Compliant finishes available on special order .500 (12.7) 9581 BINDING HEAD SCREWS – COLORED HEAD STAINLESS STEEL PAN HEAD SCREWS • Phillips drive pan head machine screws CAT. L Ideal for quick identification of screw terminal. Reduces errors in wirng of cables. NO. LENGTH THREAD See pages 62-65 for screw terminals with colored screws installed. Only head is painted, provides reliable electrical contact to terminal. .250 (6.4) 9900 .375 (9.5) 9901 4-40 MATERIAL: Stainless Steel .500 (12.7) 9902 .250 (6.4) 9903 CAT. NO. CAT. NO. .375 (9.5) 9904 6-32 M3 × HEAD 6-32 × COLOR .250 (6.3) L 6mm L .500 (12.7) 9905 7689-1 NICKEL 8190-1 .375 (9.5) 9906 9191-2 RED 9190-2 THREAD .500 (12.7) 9907 8-32 L 9191-3 BLACK 9190-3 THREAD .750 (19.1) 9908 9191-4 WHITE 9190-4 .375 (9.5) 9191-5 BLUE 9190-5 9909 9191-6 GREEN 9190-6 .500 (12.7) 9910 10-32 MATERIAL: Brass, Nickel Plate with 9191-7 YELLOW 9190-7 Painted Color Head .750 (19.1) 9911 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 133 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED WIDE ROLL EYELETS A choice of the most A B STAKING OUTSIDE LENGTH C MTG. TOOL popular sizes in use for CAT. DIAMETER UNDER FLANGE HOLE CAT. PC board and electronic NO. BARREL FLANGE DIAMETER SIZE NO. assembly applications. 22 .062 (1.57) STAKING TOOLS 23 .093 (2.36) Set consisting of top and bottom tool. .062 (1.57) 24 .059 (1.49) O.D. .125 (3.18) 3075 .105 (2.7) USE DRILL Made from Tool Steel and highly polished. 25 .045 (1.14) I.D. .156 (3.96) #51 26 .187 (4.75) 27 .219 (5.56) C 33 .093 (2.36) 34 .125 (3.18) .093 (2.36) .089 (2.26) O.D. .312 [7.9] O.D. 35 .156 (3.96) .150 (3.8) USE DRILL 3076 .070 (1.78) I.D. #42 36 .187 (4.75) B 37 .219 (5.56) TOP TOOL 43 .093 (2.36) 44 .125 (3.18) A .125 (3.18) 45 .121 (3.07) O.D. .156 (3.96) .312 [7.9] .200 (5.1) USE DRILL 3077 46 .102 (2.59) I.D. .187 (4.75) O.D. #30 47 .219 (5.56) 48 .250 (6.35) BOTTOM TOOL MATERIAL: Brass, Bright Electro 14 .125 (3.18) Tin, MIL-T-10727. Other platings .156 (3.96) .152 (3.86) O.D 15 . .156 (3.96) can be furnished. .245 (6.2) USE DRILL 3079 16 .187 (4.75) .132 (3.35) I.D. 5/32” 17 .219 (5.56) SEMI-TUBULAR RIVETS These standardized brass rivets typify the MTG. BA H scope and variety of popular rivets that will CAT. NO. LENGTH UNDER HEAD SHANK DIAMETER HEAD DIAMETER HOLE SIZE provide faster and stronger assemblies at 3381 .125 (3.2) lower cost. We suggest you rivet and test a .067(1.70) Dia. sample before purchasing large quantities for 3382 .156 (3.9) .060 (1.55) .109 (2.8) USE DRILL #51 your application. 3383 .187 (4.8) 3384 .156 (3.9) H 3385 .187 (4.8) .093 (2.36) Dia. .087 (2.21) .147 (3.7) 3386 .218 (5.5) USE DRILL #42 3387 .250 (6.4) 3388 .156 (3.9) B 3389 .187 (4.8) .128 (3.25) Dia. .218 (5.5) .120 (3.06) 3390 .218 (5.5) USE DRILL #30 A 3391 .250 (6.4) MATERIAL: Brass, Nickel Plate SNAP RIVETS DWG. 1 T DWG. 2 A B A B As Installed L L D D Attach panels and mounting hardware without any tooling. Leaves a clean cosmetic look once installed. Can be installed without access to underside. Removable so assembly can be CAT. T L D A B MTG. easily repaired or upgraded. NO. DWG. PANEL THICKNESS RIVET LENGTH RIVET DIAMETER HEAD DIAMETER HEAD HEIGHT HOLE SIZE 3440 1 .051/.079 (1.3/2.0) .130 (3.3) 3441 1 .083/.110 (2.1/2.8) .160 (4.0) .076 (1.9) .165 (4.2) .047 (1.2) .083/.087 (2.1/2.2) 3442 1 .114/.142 (2.9/3.6) .190 (4.8) 3443 2 .118/.157 (3.0/4.0) .220 (5.6) 3444 2 .146/.181 (3.7/4.6) .240 (6.1) .138 (3.5) .252 (6.4) .063 (1.6) .142/.146 (3.6/3.7) 3445 2 .177/.217 (4.5/5.5) .280 (7.1) 3446 2 .217/.256 (5.5/6.5) .310 (7.9) 3447 2 .177/.217 (4.5/5.5) .280 (7.1) 3448 2 .217/.256 (5.5/6.5) .310 (7.9) .158 (4.0) .315 (8.0) .071 (1.8) .161/.165 (4.1/4.2) 3449 2 .256/.295 (6.5/7.5) .350 (9.0) 3450 2 .295/.335 (7.5/8.5) .390 (10.0) MATERIAL: Nylon 6/6, UL Rated 94V-2, Black ® 134 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED EYELETS & RIVETS STAKING TOOL KITS “BASIC” STAKING KIT INDIVIDUAL TOOLS This kit provides the basic components needed to stake a majority of our most popular sizes of TOP SETTING TOOLS (Swager) eyelets, rivets and terminals. The unskilled operator can produce profesional looking assemblies For Single End Terminals, Eyelets or Rivets quickly and with minimal training. 1/4” Diameter Tools CAT. NO. FOR SHANK DIA. SHANK DIA. 1714 .062(1.57) to .098(2.49) RIVET EYELET DIA. DIA. 1715 .110(2.8) to.125(3.2) RIVET EYELET DIA. DIA. 1328 .130(3.3) to .140(3.6) 1324 .180(4.5) to .190(4.8) For Doube End (Feed-Thru) SHANK DIA. Hole in tool fits over Pin head and securely stakes the rivet part of terminal. CAT. NO. CONSISTS OF ONE EACH: CAT. NO. FOR PIN ON RIVET END 1714 Top Setting Tool 1304 .051 (1.30) Hole Dia. 1715 1305 .063 (1.60) Hole Dia. Anvil Holder 1719 1306 .073 (1.85) Hole Dia. 1716 Bottom Anvil 1307 .086 (1.49) Hole Dia. CAT. NO. 1721 COMPLETE KIT 1717 1324 .098 (2.49) Hole Dia. “MASTER” STAKING KIT BOTTOM ANVILS For Single End Terminals or Double End Terminals This kit provides all of the components needed to stake most terminals, standoffs, eyelets or rivets. Anvils have different size holes in each end therefore This kit also includes sprung receding pins so that eyelets can be prealigned for easy assembly of will accept 2 sizes of Pins of either Single or Double componets. Kit supplied in convenient plastic case for ease of use. A DIA. end Turret type Terminals. AB .750 RIVET EYELET .250 [6.4] DIA. [19.0] DIA. CAT. NO. DIA. DIA. 1722 .053 (1.35) .065 (1.65) B DIA. 1716 .070 (1.78) .100 (2.54) SHANK 1717 .128 (3.25) .152 (3.86) DIA. ANVILS FOR FORK TERMINALS .065 [1.7] SLOT Accepts Diameter of 3/32 to 5/32 at one end and diamter of 3/16 other end .040 (1.0) slot .250 [6.4] .750 one end and .060 (1.52) slot at other end. [19.0] DIA. CAT. NO. CONSISTS OF ONE EACH: .042 [1.1] SLOT 1714 1715 CAT. NO. 1726 1304 1305 Top Swaging Tool ANVILS FOR SWAGE SPACERS 1306 1307 CAT. NO. BUSHING SIZE 1324 1326 Holds Bushing with 5/32” O.D. 1719 Anvil Holder 1325 For Bushing with 6-32” Thread 1325 Anvil for 6-32 Standoffs 1309 For Bushing with 4-40 Thread 1326 1716 Anvil for Turret Terminals TOOL HOLDERS 1717 1722 1726 Anvil for Fork Turret Terminals Tool holders will hold all .250 (6.4) diameter anvils. 1315 Receding Pin - .045 (1.15) Dia. May be used with receding pin and return spring to 1316 Receding Pin - .069 (1.75) Dia. hold eyelets in place during the staking process. 1321 Return Spring for Receding Pins CAT. NO. 1713 COMPLETE KIT CAT. NO. 1719 “IMPACT” STAKING KIT All that is required to stake almost all swage components. Just press down and it stakes. Tools pro- to provide heavy to light blows. Receding sprung pins can be assembled into anvil to locate vided allow bench top staking with out setting up arbor or drill press. Staking tool can be adjusted eyelets for easy assembly of components. Kit supplied in convenient plastic case for ease of use. CAT. NO. CONSISTS OF ONE EACH: TOOLS 1302 Impact Handle 1300 Anvil Tool Holder Base SWAGING TOOLS 1312 .040 (1.02) to .072 (1.83) 1313 .078 (1.98) to .093 (2.36) SWAGING TOOLS FOR DOUBLE ENDED TURRET 1310 .053 (1.35) Diameter Hole 1311 .062 (1.57) Diameter Hole ANVIL COMPENTS 1716 1717 Anvil for Turret Terminals 1722 1726 Anvil for Fork Turret Terminals 1315 Receding Pin - .045 (1.15) Dia. 1316 Receding Pin - .069 (1.75) Dia. 1321 Return Spring for Receding Pins CAT. NO. 1707 COMPLETE KIT 135 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PTFE INSULATED TERMINALS & PINS • Space saving design for high SPECIFICATIONS density packaging Mounting Detail Terminal: Brass, Tin Plate • Outstanding Electrical, Mechanical, Bushing: White PTFE Thermal and Chemical properties 60° • Provides greater pull-out strength and high torque resistance .012 [.30] • Ideal for high quality terminal .062 [1.57] and connector applications • Custom PTFE jacks manufactured to Mtg. Hole your specifications Dia. • Other platings and bushing colors available upon request PINS SOLDER TERMINALS TURRET PIN R R R .040 [1.0] A A E E B E A E .040 C [1.00] C C C Top Bottom Top B B A Mount Mount Mount B FIG. 1 FIG. 2 FIG. 3 CAT. NO. A B C E Mtg. Hole Dia. CAT. NO. FIG. A B C E R Mtg. Hole Dia. 11065 .125 (3.2) .104 (2.6) .089 (2.3) .161 (4.1) .091 (2.3) 11300 1 .125 (3.2) .093 (2.4) .100 (2.5) .210 (5.3) .060 (1.5) .086(2.2) 11066 .125 (3.2) .093 (2.4) .100 (2.5) .925 (23.5) .086 (2.2) 11301 1 .125 (3.2) .093 (2.4) .080 (2.0) .250 (6.4) .080 (2.0) .086(2.2) 11067 .172 (4.4) .148 (3.8) .100 (2.5) .150 (3.8) 11302 1 .125 (3.2) .093 (2.4) .100 (2.5) .250 (6.4) .080 (2.0) .086(2.2) 11068 .172 (4.4) .148 (3.8) .075 (1.9) .185 (4.7) 11303 1 .172 (4.4) .148 (3.8) .140 (3.6) .194 (4.9) .093 (2.4) .136(3.5) 11069 .172 (4.4) .148 (3.8) .050 (1.3) .260 (6.6) 11304 1 .172 (4.4) .148 (3.8) .110 (2.8) .250 (6.4) .080 (2.0) .136(3.5) 11070 .172 (4.4) .148 (3.8) .075 (1.9) .260 (6.6) 11305 1 .172 (4.4) .148 (3.8) .125 (3.2) .303 (7.7) .080 (2.0) .136(3.5) .136 (3.5) 11071 .172 (4.4) .148 (3.8) .100 (2.5) .250 (6.4) 11306 1 .172 (4.4) .148 (3.8) .165 (4.2) .290 (7.4) .093 (2.4) .136(3.5) 11072 .172 (4.4) .148 (3.8) .160 (4.1) .250 (6.4) 11307 1 .172 (4.4) .148 (3.8) .250 (6.4) .290 (7.4) .093 (2.4) .136(3.5) 11073 .172 (4.4) .148 (3.8) .100 (2.5) .490 (12.4) 11308 1 .172 (4.4) .148 (3.8) .165 (4.2) .437 (11.1) .093 (2.4) .136(3.5) 11074 .172 (4.4) .148 (3.8) .100 (2.5) .585 (14.9) 11320 2 .172 (4.4) .148 (3.8) .100 (2.5) .150 (3.8) .080 (2.0) .136(3.5) 11321 2 .187 (4.8) .164 (4.2) .150 (3.8) .370 (9.4) .090 (2.3) .152 (3.9) 11322* 2 .150 (3.8) .125 (3.2) .110 (2.8) .180 (4.6) .090 (2.3) .113 (2.9) PIN HOLLOW PIN 11310 2 .125 (3.2) .093 (2.4) .100 (2.5) .170 (4.3) .060 (1.5) .086(2.2) 11311 3 .172 (4.4) .148 (3.8) .100 (2.5) .210 (5.3) .080 (2.0) .136(3.5) .032 [8.1] DIA 11312 3 .187 (4.8) .171 (4.3) .155 (3.9) .210 (5.3) .080 (2.0) .158 (4.0) HOLE THRU. *Hollow Turret .040 [1.0] .190 [4.8] .045 [1.1] .148 [3.8] .125 [3.2] .125 [3.2] TURRET-TO-TURRET .120 [3.0] .075 [1.9] Bottom .093 [2.4] .090 [2.3] Mount .312 [7.9] .025 [.64] .040 [1.0] .150 [3.8] .172 [4.4] .200 [5.1] .196 [5.0] .195 [5.0] .171 [4.3] Mtg. Hole Mtg. Hole .125 [3.2] CAT. NO. 11075 CAT. NO. 11076 .136 (3.5) Dia. .113 (2.9) Dia. Feed-Thru .173 [4.4] .180 [4.6] .172 [4.4] PIN-TO-PIN .171 [4.3] R Mtg. Hole Mtg. Hole E A CAT. NO. 11250 CAT. NO. 11251 .158 (4.0) Dia. .158 (4.0) Dia. F C TURRET-TO-PIN Feed-Thru .060 [1.5] B R .093 [2.4] .172 [4.4] .140 [3.6] Mtg. Hole E CAT. NO. A B C E F R Dia. C 11150 .093 (2.4) .075 (1.9) .100 (2.5) .315 (8.0) .550 (13.9) .030 (7.6) .069 (1.8) .100 [2.5] 11151 .125 (3.2) .093 (2.4) .100 (2.5) .196 (5.0) .453 (11.5) .040 (1.0) Feed-Thru .148 [3.8] Feed-Thru 11152 .125 (3.2) .093 (2.4) .100 (2.5) .250 (6.4) .515 (13.1) .040 (1.0) .086 (2.2) .075 [1.9] .040 [1.0] 11153 .125 (3.2) .093 (2.4) .100 (2.5) .250 (6.4) .443 (11.3) .040 (1.0) .270 [6.9] 11154 .150 (3.8) .125 (3.2) .100 (2.5) .250 (6.4) .443 (11.3) .040 (1.0) .113 (2.9) .030 [.81] 11155 .172 (4.4) .148 (3.8) .100 (2.5) .250 (6.4) .515 (13.1) .040 (1.0) Mtg. CAT. Hole 11156 .172 (4.4) .148 (3.8) .110 (2.8) .260 (6.6) .535 (13.6) .040 (1.0) NO. C E R Dia. 11157 .172 (4.4) .148 (3.8) .250 (6.4) .250 (6.4) .710 (18.0) .040 (1.0) .100 .250 .080 .136 (3.5) 11216 11158 .172 (4.4) .148 (3.8) .250 (6.4) .303 (7.7) .719 (18.3) .040 (1.0) (2.5) (6.4) (2.0) .136 11159 .172 (4.4) .148 (3.8) .160 (4.1) .250 (6.4) .725 (18.4) .040 (1.0) .230 .375 .093 (3.5) Mtg. Hole 11217 11160 .172 (4.4) .148 (3.8) .170 (4.3) .250 (6.4) .630 (16.0) .040 (1.0) (5.8) (9.5) (2.4) CAT. NO. 11218 .066 (1.7)Dia. ® 136 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED PTFE INSULATED TERMINALS & PINS INSULATED TERMINALS SPLIT-TYPE FORK TURRETS THREADED FEED - THRU TERMINALS SPECIFICATIONS SPECIFICATIONS Terminal: Brass, Tin Plate FORK FORK-TO-TURRET Terminal: Brass, Tin Plate .032 [0.8] (2) PLS. Bushing: White PTFE Bushing: White PTFE A Body: Brass, Nickel Plate .235 [6.0] .156 [4.0] HEX R R 4-40 THREAD L E E E .821 .095 [2.4] C [20.9] C LOCKWASHER CAT. NO.EL B B NUT 11360 .328 (8.3) .200 (5.1) A 11361 .378 (9.6) .250 (6.4) Nut and washer supplied unassembled FIG. 1 FIG. 2 SPECIFICATIONS .082 [2.1] Terminal: Brass, Tin Plate Bushing: White PTFE CAT. FIG. Mtg. Hole .287 [7.3] .250 [6.4] HEX NO. NO. A B C E R Dia. Body: Brass, Nickel Plate 11100 1 .172 (4.4) .148 (3.8) .125 (3.2) .250 (6.4) .125 (3.2) .136 (3.5) .225 [5.7] 11111 1 .187 (4.8) .171 (4.3) .150 (3.8) .390 (9.9) 12-28 THREAD .403 [10.2] 11112 1 .187 (4.8) .171 (4.3) .150 (3.8) .453 (11.5) .062 [1.6] 11113 1 .187 (4.8) .171 (4.3) .150 (3.8) .328 (8.3) .148 (3.8) .158 (4.0) 11114 1 .187 (4.8) .171 (4.3) .150 (3.8) .390 (9.9) LOCKWASHER 11115 1 .187 (4.8) .171 (4.3) .150 (3.8) .453 (11.5) NUT 11116 2 .187 (4.8) .171 (4.3) .212 (5.4) .390 (9.9) CAT. NO. 11362 Nut and washer supplied unassembled SPECIFICATIONS THREADED TURRET TERMINALS R Terminal: Brass, Tin Plate E SPECIFICATIONS Bushing: White PTFE HEX Terminal: Brass, Tin Plate Body: Brass, Nickel Plate R .250 [6.4] Bushing: White PTFE THREAD E HEX L C L LOCKWASHER THREAD NUT Nut and washer supplied unassembled CAT. NO. Thread Hex C E L R 11350 2-56 .156 (3.9) .206 (5.2) .360 (9.1) .125 (3.2) .062 (1.6) CAT. NO. Thread Hex E L R 11351 4-40 .250 (6.4) .270 (6.9) .510 (12.9) .250 (6.4) .094 (2.4) 11363 10-32 .312 (7.9) .425 (10.8) .565 (14.3) .062 (1.6) 11352 6-32 .250 (6.4) .270 (6.9) .510 (12.9) .375 (9.5) .094 (2.4) 11364 6-32 .188 (4.8) .368 (9.3) .510 (12.9) .040 (1.0) MOLDED DIALLYL PHTHALATE INSULATED THREADED TERMINALS Properties: MATERIAL: • High Dielectric Breakdown Terminal: Brass, Tin Plate • Continuous Use Temperature up to 350
F (176
C) Insulator: Blue Molded Diallyl Phthalate, SDGF • UL 94 V-O Rated Base: Brass, Tin Plate • Other platings and insulator colors available upon request SINGLE TURRET SINGLE TURRET DOUBLE TURRET TO MALE THREAD TO FEMALE THREAD TO FEMALE THREAD R R .072 [1.8] E E .146 [3.7] .156 [4.0] .146 [3.7] .232 [5.9] B B .047 [1.2] B L .062 [1.6] .047 [1.2] L L 2-56 THREAD 2-56 THREAD .156 [4.0] HEX 4-40 THREAD .250 [6.4] HEX. .156 [4.0] HEX CAT. NO. BE L R 11500 .235 (6.0) .156 (4.0) .125 (3.2) .072 (1.8) CAT. NO. BE L R CAT. NO. LB 11501 .235 (6.0) .218 (5.5) .125 (3.2) .072 (1.8) 11510 .078 (2.0) .235 (5.9) 11512 .375 (9.5) .219 (5.6) .156 (4.0) .093 (2.4) 11502 .235 (6.0) .218 (5.5) .187 (4.8) .072 (1.8) 11511 .117 (3.0) .391 (9.9) 11513 .594 (15.1) .344 (8.7) .219 (5.6) .140 (3.6) ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 137 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED TURRET TERMINALS STYLES ORDERING INFORMATION Keystone standardized terminals are available for various board thicknesses. • Single, double and triple turrets To specify a terminal, select the “CAT. NO.” and “DASHED NUMBER” that corresponds with the board • Double-ended (feed-thru) thickness to be used. • Split-type (fork) • Tubular (hollow) DASH NUMBERS (Board Thicknesses) • Swage and thread mounting types available -1 for .032 (.81) thick Board • Bright Tin plated for extended shelf life and -2 for .062 (1.57) thick Board excellent solderability -3 for .093 (2.36) thick Board • Wide variety of sizes to suit space and wire -4 for .125 (3.2) thick Board size requirements Example:1503-1 for .032 (.81) thick Board 1503-2 for .062 (1.57) thick Board SPECIFICATIONS STAKING TOOLS For easy mounting of terminals to insulators and PC boards. Standard and MATERIAL: Brass - Per ASTM-B16, Bright Electro-Tin per MIL-T-10727 Type 1. “special order” staking tools are available. Cat. No. “TL” designates a tool Other platings available upon request. consisting of a TOP STAKING PUNCH and a BOTTOM ANVIL. Manufactured SPECIAL TERMINALS from steel with zinc plate. Punch and anvil are precision machined and Custom terminals can be manufactured to your specifications. Complete facilities available to meet your hardened to insure long life. Refer to page 135. production requirements. Quotations on special terminals furnished promptly upon receipt of sample, sketch or print. CUSTOM BUILT STAKING TOOLS Custom prototype and production staking tools can be furnished for Single-End, CUSTOM BUILT TERMINAL BOARDS Double-End, Fork Terminals, Extruded Lugs, Eyelets, Rivets, etc. Contact our We are specialists in the assembly of terminals, eyelets, clips and special hardware. Quotations on special Engineering Department for details. terminal boards furnished promptly upon receipt of sample, sketch or print. Assembly service using customer supplied materials also available. (Refer to pages 130-132 for standard terminal boards.) SINGLE, DOUBLE & TRIPLE TURRET 1528 1508 1572 1520 1532 .145 [3.7] .075 [1.90] .050 [1.27] .063 [1.60] .040 [1.02] .093 [2.36] .234 .094 [2.39] .187 .062 [1.57] .125 [3.2] .187 [4.8] [6.0] [4.8] .093 [2.36 .104 [2.7] .093 [2.36] L L L L L .062 [1.57] .072 [1.83] .078 [1.98] .112 [2.9] .047 [1.19] Staking Tool 1528-TL Staking Tool No. TL-1 Staking Tool No.TL-1 Staking Tool No. TL-2 Staking Tool No. TL-8 CAT. NO. L CAT. NO. L CAT. NO. L CAT. NO. L CAT. NO. L 1528-1 .051 (1.30) 1508-1 .053 (1.35) 1572-1 .051 (1.30) 1520-1 .078 (1.98) 1532-1 .078 (1.98) 1528-2 .082 (2.08) 1508-2 .084 (2.13) 1572-2 .082 (2.08) 1520-2 .109 (2.8) 1532-2 .109 (2.8) 1528-3 .113 (2.8) 1508-3 .115 (2.9) 1572-3 .113 (2.8) 1520-3 .141 (3.5) 1532-3 .141 (3.5) 1528-4 .145 (3.6) 1508-4 .147 (3.7) 1572-4 .145 (3.6) 1520-4 .172 (4.4) 1532-4 .172 (4.4) 1593 1573 1502 1514 1503 .093 [2.36] .062 [1.57] .109 [2.8] .145 [3.7] .094 [2.39] .281 .360 .219 .186 [7.2] [9.2] .093 [2.36] .156 [4.0] .187 [4.8] .125 [3.2] [5.6] [4.7] .156 [4.0] L L L L L .062 [1.57] .072 [1.83] .090 [2.29] .090 [2.29] .112 [2.9] Staking Tool No. TL-1 Staking Tool No. TL-1 Staking Tool No. TL-2 Staking Tool No. TL-5 Staking Tool No. TL-8 CAT. NO. L CAT. NO. L CAT. NO. L CAT. NO. L CAT. NO. L 1593-1 .054 (1.37) 1573-1 .051 (1.30) 1502-1 .078 (1.98) 1514-1 .078 (1.98) 1503-1 .078 (1.98) 1593-2 .084 (2.13) 1573-2 .082 (2.08) 1502-2 .109 (2.8) 1514-2 .109 (2.8) 1503-2 .109 (2.8) 1593-3 .115 (2.9) 1573-3 .113 (2.8) 1502-3 .141 (3.5) 1514-3 .141 (3.5) 1503-3 .141 (3.5) 1593-4 .147 (3.7) 1573-4 .145 (3.6) 1502-4 .172 (4.4) 1514-4 .172 (4.4) 1503-4 .172 (4.4) 1598 1527 THREADED TURRETS 1563 1595 1587 .145 [3.7] .093 [2.36] .484 .301 .043 [1.09] .075 [1.9] [12.3] [7.7] DIA. THRU .125 [3.2] .187 [4.8] DIA. .145 [3.7] DIA. .093 [2.4] .360 .187 [4.8] [9.2] L DIA. L .112 [2.9] .156 [4.0] .090 [2.29] .125 [3.2] .187 [4.8] 2-56 L HEX. THREAD HEX. 4-40 .125 [3.2] 4-40 L THREAD Staking Tool No. TL-2 Staking Tool No. TL-8 THREAD CAT. NO. L CAT. NO. L 1598-1 .062 (1.57) 1527-1 .078 (1.98) CAT. NO. L 1598-2 .094 (2.39) 1527-2 .109 (2.8) 1595-1 .093 (2.36) CAT. NO. L 1598-3 .125 (3.2) 1527-3 .141 (3.5) 1595-2 .125 (3.2) 1587-1 .125 (3.2) CAT. NO. 1563 1598-4 .156 (3.9) 1527-4 .172 (4.4) 1595-3 .188 (4.8) 1587-2 .188 (4.8) ® 138 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED TURRET TERMINALS TURRET TERMINALS SPLIT-TYPE (FORK) TURRETS 1533 1526 1592 1511 1515 .035 .063 [1.60] .125 [3.2] .094 [2.39] .062 [1.57] [.89] .093 [2.36] .024 [.61] DIA. DIA. THRU .025 [.63] DIA. .043 [1.09] DIA. .043 [1.09] DIA. DIA. THRU DIA. THRU DIA. THRU .025 [.64] .040 [1.02] .093 [2.36] .043 [1.09] .030 [.76] SLOT SLOT DIA. DIA. THRU SLOT .156 [4.0] .156 [4.0] .156 [4.0] .243 .125 [3.2] [6.2] .156 [4.0] DIA. L L L .046 [1.17] .062 [1.57] KNURL .060 [1.52] L L DIA. DIA. DIA. .064 [1.63] .090 [2.29] DIA. DIA. Staking Tool 1515-TL Staking Tool No. TL-3 Staking Tool No. TL-2 Staking Tool Special Order Staking Tool No. TL-3 CAT. NO. L CAT. NO. L CAT. NO. L 1515-1 .058 (1.47) CAT. NO. L 1526-1 .054 (1.37) 1592-1 .051 (1.30) CAT. NO. L 1515-2 .089 (2.26) 1533-2 .084 (2.13) 1526-2 .084 (2.13) 1592-2 .082 (2.08) 1511-2 .109 (2.8) 1515-3 .120 (3.1) 1533-3 .115 (2.9) 1526-3 .115 (2.9) 1592-3 .113 (2.8) 1511-3 .141 (3.5) 1515-4 .150 (3.8) 1533-4 .147 (3.7) 1526-4 .147 (3.7) 1592-4 .145 (3.6) 1511-4 .172 (4.4) 1510 1525 1507 1557 .032 .050 .051 [.81] [1.27] .081 [2.06] [1.30] SPECIAL DIA. THRU .070 [1.78] TURRET .062 [1.57] .081 [2.06] .079 [2.01] DIA. THRU SLOT DIA. THRU DIA. THRU TERMINALS .142 [3.61] .312 .156 [3.96] .343 .156 [3.96] .188 [4.78] .328 DIA. .375 [7.9] DIA. [8.7] DIA. DIA. [8.4] [9.6] .188 [4.78] Custom turret terminals can DIA. KNURL L KNURL be machined to your exact L KNURL L KNURL L .112 [2.84] specifications. Standard and .112 [2.84] .112 [2.84] .150 [3.81] DIA. DIA. DIA. DIA. special terminals can be staked Staking Tool No. TL-9 Staking Tool No. TL-9 Staking Tool No. TL-9 Staking Tool Special Order onto special boards. Please CAT. NO. L CAT. NO. L CAT. NO. L CAT. NO. L email/fax your design to our 1557-2 .109 (2.8) 1510-2 .109 (2.8) 1525-2 .109 (2.8) 1507-2 .109 (2.8) Engineering Department. 1510-3 .141 (3.5) 1525-3 .141 (3.5) 1507-3 .141 (3.5) 1557-3 .141 (3.5) 1510-4 .172 (4.4) 1525-4 .172 (4.4) 1507-4 .172 (4.4) 1557-4 .172 (4.4) TUBULAR TURRETS DOUBLE-ENDED TURRETS 1562 1559 1574 1633 .043 [1.09] .043 [1.09] DIA. THRU DIA. THRU .045 [1.14] .050 [1.27] (2) PLS .093 [2.36] .097 [2.5] .078 [1.98] .093 [2.36] .125 [3.2] .125 [3.2] .076 [1.93] .104 [2.7] L .156 [4.0] .187 [4.8] L .140 [3.6] L .061 [1.55] L .082 [2.08] .032 [.81] .062 [1.57] .072 [1.83] .071 [1.80] DIA. Staking Tool Special Order Staking Tool No. TL-2 Staking Tool No. TL-2 Staking Tool No. TL-4 CAT. NO. L CAT. NO. L CAT. NO. L CAT. NO. L 1562-1 .054 (1.37) 1559-1 .062 (1.57) 1633-1 .051 (1.30) 1574-1 .051 (1.30) 1562-2 .084 (2.13) 1559-2 .094 (2.39) 1633-2 .082 (2.08) 1574-2 .082 (2.08) 1562-3 .115 (2.9) 1559-3 .125 (3.2) 1633-3 .113 (2.8) 1574-3 .113 (2.8) 1562-4 .147 (3.7) 1559-4 .156 (3.9) 1633-4 .145 (3.6) 1574-4 .145 (3.6) 1519 1613 1575 1540 .067 [1.70] .064 [1.63] .050 [1.27] .050 [1.27] DIA. THRU DIA. THRU (3) PLS (3) PLS .140 [3.6] .093 [2.36] .093 [2.36] .188 [4.8] .186 [4.7] .186 [4.7] .120 [3.1] .266 [6.8] .187 [4.8] .156 [4.0] L L .082 [2.08] .082 [2.08] L L .062 [1.57] .072 [1.83] .090 [2.29] .110 [2.8] Staking Tool No. TL-8 Staking Tool No. TL-4 Staking Tool No. TL-4 Staking Tool No. TL-5 CAT. NO. L CAT. NO. L CAT. NO. L CAT. NO. L 1519-1 .078 (1.98) 1613-1 .051 (1.30) 1575-1 .051 (1.30) 1540-2 .107 (2.7) 1519-2 .109 (2.8) 1613-2 .082 (2.08) 1575-2 .082 (2.08) 1540-3 .141 (3.5) 1519-3 .141 (3.5) 1613-3 .113 (2.8) 1575-3 .113 (2.8) 1540-4 .172 (4.4) 1519-4 .172 (4.4) 1613-4 .145 (3.6) 1575-4 .145 (3.6) 1582 1509 1583 1545 .078 [1.98] .055 [1.40] .050 [1.27] DIA. THRU .145 [3.68] DIA. THRU (4) PLS (2) PLS .360 [9.2] .187 [4.75] .109 [2.8] .093 [2.36] .186 [4.72] .150 [3.8] .328 [8.4] L .312 [7.9] .156 [4.0] L .187 [4.8] .312 .164 [4.17] .112 [2.84] L L .072 [1.83] [7.9] .082 [2.08] .078 [1.98] .112 [2.9] (2) PLS Staking Tool No. TL-5 Staking Tool No. TL-8 Staking Tool No. TL-4 Staking Tool No. TL-12 CAT. NO. L CAT. NO. L CAT. NO. L 1582-1 .075 (1.91) 1509-1 .078 (1.98) 1583-1 .051 (1.30) CAT. NO. L 1582-2 .105 (2.7) 1509-2 .109 (2.8) 1583-2 .082 (2.08) 1545-2 .105 (2.7) 1582-3 .135 (3.4) 1545-3 .135 (3.4) 1509-3 .141 (3.5) 1583-3 .113 (2.8) 1582-4 .165 (4.2) 1545-4 .165 (4.2) 1509-4 .172 (4.4) 1583-4 .145 (3.6) 139 Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SCORED TURRET TERMINAL BOARDS Cut your production cost by eliminating the tooling and setup charge usually applied to non-standardized boards. Terminals are securely staked and tinned for easy soldering. MATERIAL: Choice of either PBE or GEE. PBE: Paper base electrical, MIL-1-24768/20, Type XP natural, Temp. 250°F (121°C) max. GEE: Glass epoxy, MIL-I-24768/27, Type G-10, Temp. 300°F (155°C) max. Terminals: Brass, ASTM-B16, Tin Plate, MIL-T-10727. Other platings can be furnished. MODIFICATIONS Boards can be modified with other materials or terminals of your choice. Marking can also be added. Quotations upon request. STANDARD TURRET TERMINAL BOARDS W .120 [3.1] DIA. VIEW SHOWING SCORING 13.125 [333.4] 2.625 [66.7] 2.625 [66.7] 2.625 [66.7] 2.625 [66.7] 2.625 [66.7] W S Hole thru Hole thru .187 [4.8] .375 [9.5] .375 [9.5] .093 [2.36] 1503 1509 1507 1545 NO. OF CAT. CAT. CAT. CAT. W S TERMS MATERIAL NO. NO. NO. NO. PBE 15031 15091 15071 15041 .500 Single 25 (12.7) Row GEE 15231 15291 15271 15241 PBE 15032 15092 15072 15042 1.500 1.000 50 (38.1) (25.4) GEE 15232 15292 15272 15242 Choice of 4 Types of Terminals • Five sections SCORED for easy separation. PBE 15036 15096 15076 15046 1.500 1.187 50 (38.1) (30.1) • Mounting holes in each section. GEE 15236 15296 15276 15246 PBE 15033 15093 15073 15043 2.000 1.500 50 (50.8) (38.1) GEE 15233 15293 15273 15243 PBE 15034 15094 15074 15044 2.500 2.000 50 (63.5) (50.8) GEE 15234 15294 15274 15244 PBE 15035 15095 15075 15045 3.000 2.500 50 (76.2) (63.5) GEE 15235 15295 15275 15245 MINIATURE TURRET TERMINAL BOARDS W .144 [3.7] DIA. VIEW SHOWING SCORING 9.685 [246.0] 1.937 [49.2] 1.937 [49.2] 1.937 [49.2] 1.937 [49.2] 1.937 [49.2] W S .156 [4.0] .250 [6.4] .312 [7.9] .062 [1.57] 1572 1573 1574 1575 1583 1559 NO. OF CAT. CAT. CAT. CAT. CAT. CAT. W S TERMS MATERIAL NO. NO. NO. NO. NO. NO. PBE 15047 15057 15067 15077 15087 15097 .312 Single Choice of 6 Types of Terminals 25 (7.9) Row GEE 15247 15257 15267 15277 15287 15297 • Five sections SCORED for easy separation. PBE 15048 15058 15068 15078 15088 15098 .875 .562 • Mounting holes in each section. 50 (22.2) (14.3) GEE 15248 15258 15268 15278 15288 15298 PBE 15049 15059 15069 15079 15089 15099 1.125 .812 50 (28.6) (20.6) GEE 15249 15259 15269 15279 15289 15299 W .062 [1.57] DIA. VIEW SHOWING SCORING 7.812 [198.4] 1.562 [39.7] 1.562 [39.7] 1.562 [39.7] 1.562 [39.7] 1.562 [39.7] W S .218 [5.6] .250 [6.4] .062 [1.57] 1502 1562 1526 1512 1533 .125 [3.2] NO. OF CAT. CAT. CAT. CAT. CAT. W S TERMS MATERIAL NO. NO. NO. NO. NO. PBE 15021 15023 15025 15063 15053 .312 Single 25 (7.9) Row GEE 15221 15223 15225 15263 15253 Choice of 5 Types of Terminals PBE 15028 15029 15026 15064 15054 .875 .500 • Five sections SCORED for easy separation. 50 (22.2) (12.7) GEE 15228 15229 15226 15264 15254 • Mounting holes in each section. PBE 15022 15024 15030 15065 15056 1.000 .750 50 (25.4) (19.1) GEE 15222 15224 15230 15265 15256 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 140 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED SCORED TURRET TERMINAL BOARDS TURRET TERMINAL BOARDS MINIATURE TURRET TERMINAL BOARDS MATERIAL: Choice of either PBE or GEE. PBE: Paper base electrical, MIL-1-24768/20. Type XP natural, Temp. 250°F (121°C) max. MODIFICATIONS GEE: Glass Epoxy, MIL-I-24768/27, Type G-10, Temp. 300°F (155°C). max. Boards can be modified with other materials or terminals of your Terminals: Brass, ASTM-B16. Tin Plate, MIL-T-10727. Other platings can be furnished. choice. Marking can also be added. Quotations upon request. DOUBLE TURRET TERMINAL NO. OF MATERIAL MATERIAL TERMS PBE GEE W S L EACH SIDE CAT. NO. CAT. NO. 1.937 (49.2) 5 15431 15531 3.687 (93.6) 12 15432 15532 1573 .312 Single 5.437 (138.1) 19 15433 15533 (7.9) Row 7.187 (182.5) 26 15434 15534 8.937 (227.0) 33 15435 15535 W 1.937 (49.2) 5 15436 15536 .144 [3.7] DIA. 3.687 (93.6) 12 15437 15537 L .875 .562 5.437 (138.1) 19 15438 15538 (22.2) (14.3) 7.187 (182.5) 26 15439 15539 8.937 (227.0) 33 15440 15540 W S 1.937 (49.2) 5 15441 15541 3.687 (93.6) 12 15442 15542 1.125 .812 .156 [4.0] .250 [6.4] .062 [1.57] 5.437 (138.1) 19 15443 15543 .312 [7.9] (28.6) (20.6) 7.187 (182.5) 26 15444 15544 8.937 (227.0) 33 15445 15545 Terminals are staked in all except end mounting holes. THRU HOLE TERMINAL NO. OF MATERIAL MATERIAL TERMS PBE GEE W S L EACH SIDE CAT. NO. CAT. NO. 1.562 (39.7) 5 15401 15501 3.093 (78.6) 12 15402 15502 .312 Single 1562 4.625 (117.5) 19 15403 15503 (7.9) Row 6.156 (156.4) 26 15404 15504 7.687 (195.2) 33 15405 15505 1.562 (39.7) 5 15406 15506 W 3.093 (78.6) 12 15407 15507 .067 [1.70] DIA. .750 .500 4.625 (117.5) 19 15408 15508 L (19.1) (12.7) 6.156 (156.4) 26 15409 15509 7.687 (195.2) 33 15410 15510 W S 1.562 (39.7) 5 15411 15511 3.093 (78.6) 12 15412 15512 1.000 .750 .218 [5.6] 4.625 (117.5) 19 15413 15513 .125 [3.2] .062 [1.57] (25.4) (19.1) 6.156 (156.4) 26 15414 15514 7.687 (195.2) 33 15415 15515 Terminals are staked in all except end mounting holes. MILITARY TERMINAL BOARDS Terminal boards are manufactured as per Military specifications MS27249. NO. OF MATERIAL MATERIAL SPECIFICATIONS TERMS GEB GEE Board Material: MIL-I-24768/27 TYPE GEE or TYPE GEB. MIL-1-24768/3 .125 (3.2) W S L EACH SIDE CAT. NO. CAT. NO. Terminal: SE12XC09 PER MIL-T-55155 Tin/Lead Plated (Non-RoHS Compliant) 2.625 (66.7) 5 MS27249-1B1 MS27249-1E1 5.250 (133.4) 10 MS27249-1B2 MS27249-1E2 • Five sections SCORED for easy separation. .500 Single 7.875 (200.0) 15 MS27249-1B3 MS27249-1E3 1503 • Mounting holes in each section. (12.7) Row 10.500 (266.7) 20 MS27249-1B4 MS27249-1E4 13.125 (333.4) 25 MS27249-1B5 MS27249-1E5 2.625 (66.7) 5 MS27249-2B1 MS27249-2E1 5.250 (133.4) 10 MS27249-2B2 MS27249-2E2 1.500 1.000 7.875 (200.0) 15 MS27249-2B3 MS27249-2E3 (38.1) (25.4) 10.500 (266.7) 20 MS27249-2B4 MS27249-2E4 13.125 (333.4) 25 MS27249-2B5 MS27249-2E5 2.625 (66.7) 5 MS27249-3B1 MS27249-3E1 5.250 (133.4) 10 MS27249-3B2 MS27249-3E2 2.000 1.500 7.875 (200.0) 15 MS27249-3B3 MS27249-3E3 (50.8) (38.1) 10.500 (266.7) 20 MS27249-3B4 MS27249-3E4 13.125 (333.4) 25 MS27249-3B5 MS27249-3E5 2.625 (66.7) 5 MS27249-4B1 MS27249-4E1 5.250 (133.4) 10 MS27249-4B2 MS27249-4E2 W 2.500 2.000 7.875 (200.0) 15 MS27249-4B3 MS27249-4E3 (63.5) (50.8) VIEW SHOWING SCORING 10.500 (266.7) 20 MS27249-4B4 MS27249-4E4 L 13.125 (333.4) 25 MS27249-4B5 MS27249-4E5 2.625 [66.7] 2.625 [66.7] 2.625 [66.7] 2.625 [66.7] 2.625 [66.7] 2.625 (66.7) 5 MS27249-5B1 MS27249-5E1 5.250 (133.4) 10 MS27249-5B2 MS27249-5E2 W S 3.000 2.500 7.875 (200.0) 15 MS27249-5B3 MS27249-5E3 (76.2) (63.5) 10.500 (266.7) 20 MS27249-5B4 MS27249-5E4 .187 [4.8] .375 [9.5] .375 [9.5] .120 [3.1] DIA. TYP. .125 [3.18] 13.125 (333.4) 25 MS27249-5B5 MS27249-5E5 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 141 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED TURRET TERMINAL BOARDS • Save Tooling • Economical • Complete Range of Sizes Ready-Made Terminal Boards: Low cost, meets commercial and military specifications. Produced in large quantities, making it possible to eliminate tooling and setup charges usually applied to non-standard boards. BOARDS ON THIS PAGE ARE NOT SCORED NO. OF MATERIAL MATERIAL TERMS PBE GEE W S L EACH SIDE CAT. NO. CAT. NO. 2.625 (66.7) 5 15101 15301 5.250 (133.4) 12 15102 15302 .500 [12.7] Single Row 7.875 (200.0) 19 15103 15303 10.500 (266.7) 26 15104 15304 1503 13.125 (333.4) 33 15105 15305 2.625 (66.7) 5 15106 15306 5.250 (133.4) 12 15107 15307 1.188 (30.2) .750 (19.1) 7.875 (200.0) 19 15108 15308 10.50 (266.7) 26 15109 15309 13.125 (333.4) 33 15110 15310 W 2.625 (66.7) 5 15111 15311 5.250 (133.4) 12 15112 15312 .120 [3.1] DIA. L 1.500 (38.1) 1.000 (25.4) 7.875 (200.0) 19 15113 15313 10.500 (266.7) 26 15114 15314 13.125 (333.4) 33 15115 15315 2.625 (66.7) 5 15116 15316 WS 5.250 (133.4) 12 15117 15317 2.000 (50.8) 1.500 (38.1) 7.875 (200.0) 19 15118 15318 10.500 (266.7) 26 15119 15319 .187 [4.8] .375 [9.5] .093 [2.36] 13.125 (333.4) 33 15120 15320 2.625 (66.7) 5 15121 15321 5.250 (133.4) 12 15122 15322 2.500 (63.5) 2.000 (50.8) 7.875 (200.0) 19 15123 15323 MATERIAL: Choice of either PBE or GEE. 10.500 (266.7) 26 15124 15324 PBE: Paper base electrical,MIL-1-24768/20, Type XP natural, Temp. 250°F (121°C) max. 13.125 (333.4) 33 15125 15325 GEE: Glass epoxy, MIL-I-24768/27, Type G-10, Temp. 300ºF (155°C) max. 2.625 (66.7) 5 15126 15326 Terminals: Brass, ASTM-B16. Tin Plate, MIL-T-10727. Other plating can be furnished. 5.250 (133.4) 12 15127 15327 3.000 (76.2) 2.500 (63.5) 7.875 (200.0) 19 15128 15328 10.500 (266.7) 26 15129 15329 MODIFICATIONS 13.125 (333.4) 33 15130 15330 Boards can be modified with other materials or terminals of your choice. Marking can also be added. Quotations upon request. L .187 [4.8] A Hole thru Hole thru .375 [9.5] 1503 1509 1545 1507 NO. OF .500 [12.7] L A TERMS CAT. NO. CAT. NO. CAT. NO. CAT. NO. .120 [3.1] DIA. (2) PLS .093 [2.36] 1.125 (28.6) .750 (19.1) 1 603-1 609-1 604-1 607-1 1.500 (38.1) 1.125 (28.6) 2 603-2 609-2 604-2 607-2 1.875 (47.6) 1.500 (38.1) 3 603-3 609-3 604-3 607-3 Terminals are staked in all holes except end mounting holes. 2.250 (57.2) 1.875 (47.6) 4 603-4 609-4 604-4 607-4 2.625 (66.7) 2.250 (57.2) 5 603-5 609-5 604-5 607-5 3.000 (76.2) 2.625 (66.7) 6 603-6 609-6 604-6 607-6 MATERIAL: PBE 3.375 (85.7) 3.000 (76.2) 7 603-7 609-7 604-7 607-7 PBE: Paper base electrical, FED. LP-513, Type XP natural, 3.750 (95.3) 3.375 (85.7) 8 603-8 609-8 604-8 607-8 Temp. 250°F (121°C) max. 4.125 (104.8) 3.750 (95.3) 9 603-9 609-9 604-9 607-9 Terminals: Brass, ASTM-B16. Tin Plate, MIL-T-10727. Other plating can be furnished. 4.500 (114.3) 4.125 (104.8) 10 603-10 609-10 604-10 607-10 QUICK-FIT TERMINAL STRIPS .250 (6.4) TABS MATERIAL: Fiberglass - NEMA GRADE GPO-3. A glass polyester rated for continuous operation at 300°F (155°C) .062 (1.57) Backing Strips: .031 (.79) fibre with BACKING mounting holes drilled only INSULATOR Terminals: Brass .031 (.79) FIBER A NO. TERM. BACKING STRIP CAT. NO. 1257 .032 (.81) Bright Brass L MTG. EACH CAT. CAT. L Other platings available on special order LENGTH CENTERS SIDE NO. NO. .187 [4.8] A 1.500 (38.1) 1.125 (28.6) 2 4116 4401 .375 [9.5] 2.250 (57.2) 1.875 (47.6) 4 4117 4402 .500 [12.7] 3.000 (76.2) 2.625 (66.7) 6 4118 4403 3.750 (95.3) 3.375 (85.7) 8 4119 4404 .062 [1.57] .128 [3.3] DIA. (2) PLS 4.500 (114.3) 4.125 (104.8) 10 4120 4405 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 142 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED TERMINAL BOARDS & STRIPS TERMINAL STRIPS ( TERMINAL STRIPS STANDARD & MINIATURE) Tin plated lugs and brackets. Bakelite XP .062 (1.57) thick. In addition to the strips STANDARD MINIATURE shown, we manufacture many other varieties in any configuration and materials .375 [9.5] .375 [9.5] .250 [6.4] .250 [6.4] required. Send samples or sketch for prompt quotation. .375 [9.5] .312 [7.9] .140 [3.6] DIA. .096 [2.5] DIA. STANDARD FIG MINIATURE CAT. NO. NO. CAT. NO. 800 1 837 801 2 838 802 3 839 FIG. 1 FIG. 2 FIG. 3 FIG. 4 FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 9 803 4 840 804 5 841 805 6 842 806 7 843 807 8 844 808 9 845 FIG. 10 FIG. 11 FIG. 12 FIG. 13 FIG. 14 FIG. 15 FIG. 16 809 10 846 810 11 847 811 12 848 812 13 849 813 14 850 FIG. 21 FIG. 17 FIG. 18 FIG. 19 FIG. 20 814 15 851 815 16 852 816 17 853 817 18 854 818 19 855 FIG. 22 FIG. 24 FIG. 25 819 20 856 FIG. 23 820 21 857 821 22 858 822 23 859 823 24 860 824 25 861 FIG. 26 FIG. 27 FIG. 28 FIG. 29 825 26 862 826 27 863 827 28 864 828 29 865 829 30 866 FIG. 30 FIG. 31 FIG. 32 FIG. 33 FIG. 34 830 31 867 831 32 868 832 33 — 833 34 — 834 35 — 835 36 — 836 37 — FIG. 35 FIG. 36 FIG. 37 BINDING POST STRIPS MATERIAL SPECIFICATIONS FOR ALL BINDING POST STRIPS FIBERGLASS: Reinforced Polyester NEMA GEE: Glass, Epoxy, MIL-I-24768/27 PBE: Paper base electrical, FED. LP-513 Graded GPO-3 rated for 300˚F. (155˚ C). Type G-10. Temp. 300˚F. (155˚C). Type XP natural, Temp 250˚F. max. (121˚C). Terminals supplied on these strips XP GLASS FIBER- ANO. STANDARD PHENOLIC EPOXY GLASS L MTG. OF CAT. NO. CAT. NO. CAT. NO. LENGTH CENTERS TERM 4187 4177 4167 1.250 (31.8).875 (22.2) 1 4188 4178 4168 1.687 (42.8) 1.312 (33.3) 2 L 4189 4179 4169 2.125 (54.0) 1.750 (44.5) 3 .187 [4.8] A 4190 4180 4170 2.562 (65.1) 2.187 (55.5) 4 .437 [11.1] 4191 4181 4171 3.000 (76.2) 2.625 (66.7) 5 .625 [15.9] 4192 4182 4172 3.437 (87.3) 3.062 (77.8)6 .140 [3.6] DIA. (2) PLS 4193 4183 4173 3.875 (98.4) 3.500 (88.9) 7 4194 4184 4174 4.312 (109.5) 3.937 (100.0) 8 .062 [1.57] 4195 4185 4175 4.750 (120.7) 4.375 (111.1) 9 CAT. NO. 1248 4196 4186 4176 5.187 (131.7) 4.812 (122.2) 10 GLASS FIBER- Terminals supplied on HEAVY DUTY ANO. EPOXY GLASS these strips L MTG. OF CAT. NO. CAT. NO. LENGTH CENTERS TERM 4147 4157 1.50 (38.1) 1.00 (25.4) 1 4148 4158 2.00 (50.8) 1.50 (38.1) 2 L 4149 4159 2.50 (63.5) 2.00 (50.8)3 A .250 [6.4] 4150 4160 3.00 (76.2) 2.50 (63.5) 4 .500 [12.7] 4151 4161 3.50 (88.9) 3.00 (76.2) 5 .875 [22.2] 4152 4162 4.00 (101.6) 3.50 (88.9) 6 4153 4163 4.50 (114.3) 4.00 (101.6) 7 .171 [4.4] DIA. (2) PLS 4154 4164 5.00 (127.0) 4.50 (114.3) 8 4155 4165 5.50 (139.7) 5.00 (127.0) 9 .093 [2.36] 4156 4166 6.00 (152.4) 5.50 (139.7) 10 CAT. NO. 1209 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com 143 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED CONVERSION CHART MILLIMETERS • DECIMALS • FRACTIONS mm Decimals Fractions mm Decimals Fractions mm Decimals Fractions mm Decimals Fractions mm Decimals Fractions 0.1 .0039 5.2 .2047 10.319 .4063 13/32 15.5 .6102 20.638 .8125 13/16 0.2 .0079 5.3 .2087 10.4 .4094 15.6 .6142 20.7 .8150 0.3 .0118 5.4 .2126 10.5 .4134 15.7 .6181 20.8 .8189 0.397 .0156 1/64 5.5 .2165 10.6 .4173 15.8 .6220 20.9 .8228 0.4 .0157 5.556 .2188 10.7 .4213 15.875 .6250 7/32 21.0 .8268 5/8 0.5 .0197 5.6 .2205 10.716 .4219 27/64 15.9 .6260 53/64 21.034 .8281 0.6 .0236 5.7 .2244 10.8 .4252 16.0 .6299 21.1 .8307 0.7 .0276 5.8 .2283 10.9 .4291 16.1 .6339 21.2 .8346 0.794 .0313 1/32 5.9 .2323 11.0 .4331 16.2 .6378 21.3 .8386 0.8 .0315 5.953 .2344 11.1 .4370 16.272 .6406 41/64 15/64 21.4 .8425 0.9 .0354 6.0 .2362 11.113 .4375 16.3 .6417 27/32 7/16 21.431 .8438 1.0 .0394 6.1 .2402 11.2 .4409 16.4 .6457 21.5 .8465 1.1 .0433 6.2 .2441 11.3 .4449 16.5 .6496 21.6 .8504 1.191 .0469 6.3 .2480 11.4 .4488 16.6 .6535 3/64 21.7 .8543 1.2 .0472 6.350 .2500 11.5 .4528 16.669 .6563 21/32 1/4 21.8 .8583 1.3 .0512 6.4 .2520 11.509 .4531 29/64 16.7 .6575 55/64 21.828 .8594 1.4 .0551 6.5 .2559 11.6 .4567 16.8 .6614 21.9 .8622 1.5 .0591 6.6 .2598 11.7 .4606 16.9 .6654 22.0 .8661 1.588 .0625 6.7 .2638 11.8 .4646 17.0 .6693 1/16 22.1 .8701 1.6 .0630 6.747 .2656 17/64 11.9 .4685 17.066 .6719 43/64 22.2 .8740 1.7 .0669 6.8 .2677 11.906 .4688 15/32 17.1 .6732 22.225 .8750 7/8 1.8 .0709 6.9 .2717 12.0 .4724 17.2 .6772 22.3 .8780 1.9 .0748 7.0 .2756 12.1 .4764 17.3 .6811 22.4 .8819 1.984 .0781 5/64 7.1 .2795 12.2 .4803 17.4 .6850 22.5 .8858 2.0 .0787 7.144 .2813 9/32 12.3 .4843 17.463 .6875 11/16 22.6 .8898 2.1 .0827 7.2 .2835 12.303 .4844 31/64 17.5 .6890 57/64 22.622 .8906 2.2 .0866 7.3 .2874 12.4 .4882 17.6 .6929 22.7 .8937 2.3 .0906 7.4 .2913 12.5 .4921 17.7 .6968 22.8 .8976 2.381 .0938 3/32 7.5 .2953 12.6 .4961 17.8 .7008 22.9 .9016 2.4 .0945 7.541 .2969 19/64 12.700 .5000 17.859 .7031 45/64 23.0 .9055 1/2 2.5 .0984 7.6 .2992 12.8 .5039 17.9 .7047 29/32 23.019 .9063 2.6 .1024 7.7 .3031 12.9 .5079 18.0 .7087 23.1 .9094 2.7 .1063 7.8 .3071 13.0 .5118 18.1 .7126 23.2 .9134 2.778 .1094 7/64 7.9 .3110 13.097 .5156 33/64 18.2 .7165 23.3 .9173 2.8 .1102 7.938 .3125 13.1 .5157 18.256 .7188 23/32 5/16 23.4 .9213 2.9 .1142 8.0 .3150 13.2 .5197 18.3 .7205 59/64 23.416 .9219 3.0 .1181 8.1 .3189 13.3 .5236 18.4 .7244 23.5 .9252 3.1 .1220 8.2 .3228 13.4 .5276 18.5 .7283 23.6 .9291 3.175 .1250 8.3 .3268 13.494 .5313 17/32 18.6 .7323 1/8 23.7 .9331 3.2 .1260 8.334 .3281 21/64 13.5 .5315 18.653 .7344 47/64 23.8 .9370 3.3 .1299 8.4 .3307 13.6 .5354 18.7 .7362 23.813 .9375 15/16 3.4 .1339 8.5 .3346 13.7 .5394 18.8 .7402 23.9 .9409 3.5 .1378 8.6 .3386 13.8 .5433 18.9 .7441 24.0 .9449 3.572 .1406 9/64 8.7 .3425 13.891 .5469 35/64 19.0 .7480 24.1 .9488 3.6 .1417 8.731 .3438 11/32 13.9 .5472 19.050 .7500 3/4 24.2 .9528 3.7 .1457 8.8 .3465 14.0 .5512 19.1 .7520 61/64 24.209 .9531 3.8 .1496 8.9 .3504 14.1 .5551 19.2 .7559 24.3 .9567 3.9 .1535 9.0 .3543 14.2 .5591 19.3 .7598 24.4 .9606 3.969 .1563 5/32 9.1 .3583 14.288 .5625 19.4 .7638 9/16 24.5 .9646 4.0 .1575 9.128 .3594 23/64 14.3 .5630 19.447 .7656 49/64 24.6 .9685 4.1 .1614 9.2 .3622 14.4 .5669 19.5 .7677 31/32 24.606 .9688 4.2 .1654 9.3 .3661 14.5 .5709 19.6 .7717 24.7 .9724 4.3 .1693 9.4 .3701 14.6 .5748 19.7 .7756 24.8 .9764 4.366 .1719 11/64 9.5 .3740 14.684 .5781 37/64 19.8 .7795 24.9 .9803 4.4 .1732 9.525 .3750 14.7 .5787 19.844 .7813 3/8 25/32 25.0 .9843 4.5 .1772 9.6 .3780 14.8 .5827 19.9 .7835 63/64 25.003 .9844 4.6 .1811 9.7 .3819 14.9 .5866 20.0 .7874 25.1 .9882 4.7 .1850 9.8 .3858 15.0 .5906 20.1 .7913 25.2 .9921 4.763 .1875 9.9 .3898 15.081 .5938 19/32 20.2 .7953 3/16 25.3 .9961 4.8 .1890 9.922 .3906 25/64 15.1 .5945 20.241 .7969 51/64 25.400 1.0000 1 4.9 .1929 10.0 .3937 15.2 .5984 20.3 .7992 ® 5.0 .1969 10.1 .3976 15.3 .6024 20.4 .8031 5.1 .2008 10.2 .4016 15.4 .6063 20.5 .8071 5.159 .2031 13/64 10.3 .4055 15.478 .6094 39/64 20.6 .8110 www.keyelco.com PC Hardware • Coin Cell Holders & Retainers • Plugs & Jacks • Battery Clips & Holders • Computer Brackets & Hardware • Fuse Clips & Holders Terminals & Lugs • Spacers & Standoffs • Panel & Insulating Hardware • Micro Pins & Jacks • Tape & Reel SMT Products Test Points • Audio Jacks • Auto Fuse Clips • USB and IEEE 1394 Plugs & Sockets Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED ENGINEERING DATA QUALITY ASSURANCE / ENGINEERING DATA QUALITY ASSURANCE DRILL SIZE DIAMETER TABLE Keystone’s quality system is certified to ISO 9001:2000 by DNV Certifica- Drill Drill Drill Drill tion, Inc. under the RAB and RvA accreditations. Our Quality Assurance Program Diameter Size Diameter Size Diameter Size Diameter Size is in accordance with these requirements and applies to all standard and cus- .0135 80 .0935 42 .2031 13/64 .4040 Y tom interconnect components and electronic hardware. .0145 79 .0938 3/32 .2040 6 .4062 13/32 It is Keystone’s Quality Policy to continuously improve its products to better .0156 1/64 .0960 41 .2055 5 .4130 Z .0160 78 .0980 40 .2090 4 .4219 27/64 satisfy the needs of its customers and to deliver quality products, every time .0180 77 .0995 39 .2130 3 .4375 7/16 and on time. .0200 76 .1015 38 .2188 7/32 .4531 29/64 .0210 75 .1040 37 .2210 2 .4688 15/32 .0225 74 .1065 36 .2280 1 .4844 31/64 .0240 73 .1094 7/64 .2340 A .5000 1/2 .0250 72 .1100 35 .2344 15/64 .5156 33/64 QUALITY ASSURANCE .0260 71 .1110 34 .2380 B .5312 17/32 .0280 70 .1130 33 .2420 C .5469 35/64 • Baty Gage Master Comparator • Ames Precision Hardness Tester .0292 69 .1160 32 .2460 D .5625 9/16 .0310 68 .1200 31 .2500 1/4 .5781 37/64 • Thread, Plug and Ring Gauges • Gauge Blocks and Pin Gauges .0312 1/32 .1250 1/8 .2500 E .5938 19/32 .0320 67 .1285 30 .2570 F .6094 39/64 • Granite Surface Plates • Micrometers and Verniers .0330 66 .1360 29 .2610 G .6250 5/8 .0350 65 .1405 28 .2656 17/64 .6406 41/64 • Dial Indicators • Depth and Height Gauges .0360 64 .1406 9/64 .2660 H .6562 21/32 .0370 63 .1440 27 .2720 I .6719 43/64 • Plating Thickness Tester • ISO 9001:2008 Certified .0380 62 .1470 26 .2770 J .6875 11/16 .0390 61 .1495 25 .2810 K .7031 45/64 .0400 60 .1520 24 .2812 9/32 .7188 23/32 .0410 59 .1540 23 .2900 L .7344 47/64 .0420 58 .1562 5/32 .2950 M .7500 3/4 .0430 57 .1570 22 .2969 19/64 .7656 49/64 .0465 56 .1590 21 .3020 N .7812 25/32 .0469 3/64 .1610 20 .3125 5/16 .7969 51/64 .0520 55 .1660 19 .3160 O .8120 13/16 .0550 54 .1695 18 .3230 P .8281 53/64 .0595 53 .1719 11/64 .3281 21/64 .8438 27/32 .0625 1/16 .1730 17 .3320 Q .8594 55/64 .0635 52 .1770 16 .3390 R .8750 7/8 .0670 51 .1800 15 .3438 11/32 .8906 57/64 .0700 50 .1820 14 .3480 S .9062 29/32 .0730 49 .1850 13 .3580 T .9219 59/64 .0760 48 .1875 3/16 .3594 23/64 .9375 15/16 .0781 5/64 .1890 12 .3680 U .9531 61/64 .0785 47 .1910 11 .3750 3/8 .9688 31/32 .0810 46 .1935 10 .3770 V .9844 63/64 .0820 45 .1960 9 .3860 W 1.0000 1/1 .0860 44 .1990 8 .3906 25/64 .0890 43 .2010 7 .3970 X SCREW/STUD CLEARANCE HOLE TABLE Recommended Screw/Stud Screw/Stud Clearance Size Dia. Max. Hole Dia. 0 .060 .067 1 .073 .078 2 .086 .093 3 .099 .105 4 .112 .120 5 .125 .130 6 .138 .144 8 .164 .169 10 .190 .196 12 .216 .220 14 .242 .250 1/4 .250 .257 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED CAT. PAGE CAT. PAGE CAT. PAGE 14 – 573 574 – 1027 1028 – 1421 NO. NO. NO. NO. NO. NO. 14 thru 48 . . . . . . . . . . . . . . . . . . . . . . 134 574. . . . . . . . . . . . . . . . . . . . . . . . . . . 102 1028. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 575. . . . . . . . . . . . . . . . . . . . . . . . . . . 107 1028C. . . . . . . . . . . . . . . . . . . . . . . . . . 18 51 thru 52 . . . . . . . . . . . . . . . . . . . . . . . . 9 576. . . . . . . . . . . . . . . . . . . . . . . . . . . 102 1029. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 577. . . . . . . . . . . . . . . . . . . . . . . . . . . 103 1029C. . . . . . . . . . . . . . . . . . . . . . . . . . 18 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 580 thru 583 . . . . . . . . . . . . . . . . . . . . 102 1029LC . . . . . . . . . . . . . . . . . . . . . . . . . 18 55 thru57 . . . . . . . . . . . . . . . . . . . . . . . . 8 584 thru 589 . . . . . . . . . . . . . . . . . . . . 103 1030 thru 1041 . . . . . . . . . . . . . . . . . . . 59 58 thru 60 . . . . . . . . . . . . . . . . . . . . . . . 10 590 thru 591 . . . . . . . . . . . . . . . . . . . . . . 9 1042 thru 1043 . . . . . . . . . . . . . . . . . . . 17 61 thru 66 . . . . . . . . . . . . . . . . . . . . . . . 11 593 thru 594 . . . . . . . . . . . . . . . . . . . . . 30 1045 thru 1046 . . . . . . . . . . . . . . . . . . . 59 68. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 595 thru 597 . . . . . . . . . . . . . . . . . . . . . . 9 1048 thru 1049 . . . . . . . . . . . . . . . . . . . 17 69 thru 71 . . . . . . . . . . . . . . . . . . . . . . . 11 598 thru 599 . . . . . . . . . . . . . . . . . . . . 102 1050 thru 1051 . . . . . . . . . . . . . . . . . . . 20 72. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 603 thru 609 . . . . . . . . . . . . . . . . . . . . 142 1052 thru 1053 . . . . . . . . . . . . . . . . . . . . 5 78 thru 80 . . . . . . . . . . . . . . . . . . . . . . . 11 611 thru 612 . . . . . . . . . . . . . . . . . . . . 114 1056. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 81. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 613. . . . . . . . . . . . . . . . . . . . . . . . . . . 115 1059 thru 1064 . . . . . . . . . . . . . . . . . . . . 4 82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 614. . . . . . . . . . . . . . . . . . . . . . . . . . . 114 1065 thru 1067 . . . . . . . . . . . . . . . . . . . . 3 83. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 615. . . . . . . . . . . . . . . . . . . . . . . . . . . 115 1068. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 616 thru 617 . . . . . . . . . . . . . . . . . . . . 114 1069. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 85. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 618 thru 620 . . . . . . . . . . . . . . . . . . . . 115 1071 thru 1073 . . . . . . . . . . . . . . . . . . . . 5 86 thru 89 . . . . . . . . . . . . . . . . . . . . . . . 10 621. . . . . . . . . . . . . . . . . . . . . . . . . . . 114 1081 thru 1082 . . . . . . . . . . . . . . . . . . . . 4 90 thru 91 . . . . . . . . . . . . . . . . . . . . . . . 11 628 thru 629 . . . . . . . . . . . . . . . . . . . . . . 9 1083 thru 1091 . . . . . . . . . . . . . . . . . . . . 5 92. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 630. . . . . . . . . . . . . . . . . . . . . . . . . . . 115 1093 thru 1094 . . . . . . . . . . . . . . . . . . . . 4 93 thru 95 . . . . . . . . . . . . . . . . . . . . . . . 11 631 thru 632 . . . . . . . . . . . . . . . . . . . . 114 1103. . . . . . . . . . . . . . . . . . . . . . . . . . . 20 96. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 633. . . . . . . . . . . . . . . . . . . . . . . . . . . 115 1139 thru 1199 . . . . . . . . . . . . . . . . . . . 24 97 thru 98 . . . . . . . . . . . . . . . . . . . . . . . 11 634. . . . . . . . . . . . . . . . . . . . . . . . . . . 114 1200. . . . . . . . . . . . . . . . . . . . . . . . . . 123 99 thru 100 . . . . . . . . . . . . . . . . . . . . . . 10 635 thru 636 . . . . . . . . . . . . . . . . . . . . 30 1201 thru 1209 . . . . . . . . . . . . . . . . . . . 66 101 thru 103 . . . . . . . . . . . . . . . . . . . . . . 3 637. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1210. . . . . . . . . . . . . . . . . . . . . . . . . . 123 104 thru 105 . . . . . . . . . . . . . . . . . . . . . . 5 652 thru 659 . . . . . . . . . . . . . . . . . . . . 106 1211 thru 1213 . . . . . . . . . . . . . . . . . . . 52 106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 680. . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 1215. . . . . . . . . . . . . . . . . . . . . . . . . . . 67 107. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 700 thru 705 . . . . . . . . . . . . . . . . . . . . . 85 1216. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 108. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 708. . . . . . . . . . . . . . . . . . . . . . . . . . . 114 1217. . . . . . . . . . . . . . . . . . . . . . . . . . . 67 108-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 13 715 thru 716 . . . . . . . . . . . . . . . . . . . . . 85 1218 thru 1219 . . . . . . . . . . . . . . . . . . 101 108C. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 717 thru 729 . . . . . . . . . . . . . . . . . . . . 130 1220 thru 1222 . . . . . . . . . . . . . . . . . . . 54 109-2 . . . . . . . . . . . . . . . . . . . . . . . . . . 13 730 thru 778 . . . . . . . . . . . . . . . . . . . . 129 1223 thru 1226 . . . . . . . . . . . . . . . . . . 123 109-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 13 779. . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 1227 thru 1229 . . . . . . . . . . . . . . . . . . . 54 131 thru 132 . . . . . . . . . . . . . . . . . . . . . 20 780 thru 785 . . . . . . . . . . . . . . . . . . . . 130 1230 thru 1231 . . . . . . . . . . . . . . . . . . 123 137 thru 140 . . . . . . . . . . . . . . . . . . . . . 22 789 thru 799 . . . . . . . . . . . . . . . . . . . . . 74 1232. . . . . . . . . . . . . . . . . . . . . . . . . . . 67 146 thru 153 . . . . . . . . . . . . . . . . . . . . . 21 800 thru 868 . . . . . . . . . . . . . . . . . . . . 143 1233 thru 1235 . . . . . . . . . . . . . . . . . . . 54 154 thru 156 . . . . . . . . . . . . . . . . . . . . . 22 875 thru 898 . . . . . . . . . . . . . . . . . . . . . 74 1236 thru 1238 . . . . . . . . . . . . . . . . . . 123 158. . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 900 thru 902 . . . . . . . . . . . . . . . . . . . . 103 1240 thru 1242 . . . . . . . . . . . . . . . . . . . 54 169 thru 201 . . . . . . . . . . . . . . . . . . . . . 22 903 thru 910 . . . . . . . . . . . . . . . . . . . . . 58 1247 thru 1248 . . . . . . . . . . . . . . . . . . . 67 202. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 911. . . . . . . . . . . . . . . . . . . . . . . . . . . 102 1249 thru 1250 . . . . . . . . . . . . . . . . . . . 59 203-P . . . . . . . . . . . . . . . . . . . . . . . . . . 31 913 thru 918 . . . . . . . . . . . . . . . . . . . . . 58 1251. . . . . . . . . . . . . . . . . . . . . . . . . . . 67 204. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 920 thru 923 . . . . . . . . . . . . . . . . . . . . . 94 1252. . . . . . . . . . . . . . . . . . . . . . . . . . . 56 205. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 924. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 1254. . . . . . . . . . . . . . . . . . . . . . . . . . 142 206 thru 208 . . . . . . . . . . . . . . . . . . . . . 10 925. . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 1256 thru 1263 . . . . . . . . . . . . . . . . . . . 54 209 thru 210 . . . . . . . . . . . . . . . . . . . . . 12 926. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 1264. . . . . . . . . . . . . . . . . . . . . . . . . . . 56 211. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 927 thru 930 . . . . . . . . . . . . . . . . . . . . . 97 1265 thru 1266 . . . . . . . . . . . . . . . . . . . 53 217 thru 222 . . . . . . . . . . . . . . . . . . . . . 11 931 thru 932 . . . . . . . . . . . . . . . . . . . . . 94 1267. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 223 thru 224 . . . . . . . . . . . . . . . . . . . . . 20 933 thru 935 . . . . . . . . . . . . . . . . . . . . . 95 1269 thru 1271 . . . . . . . . . . . . . . . . . . . 54 227. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 936 thru 938 . . . . . . . . . . . . . . . . . . . . 103 1272 thru 1273 . . . . . . . . . . . . . . . . . . . 67 228. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 940 thru 941 . . . . . . . . . . . . . . . . . . . . . 95 1280. . . . . . . . . . . . . . . . . . . . . . . . . . . 54 230-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 13 945 thru 957 . . . . . . . . . . . . . . . . . . . . . 96 1281 thru 1282 . . . . . . . . . . . . . . . . . . . 53 232 thru 237 . . . . . . . . . . . . . . . . . . . . . 28 967 thru 968 . . . . . . . . . . . . . . . . . . . . . 29 1283 thru 1284 . . . . . . . . . . . . . . . . . . . 66 238. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 970 thru 973 . . . . . . . . . . . . . . . . . . . . 102 1285 thru 1286 . . . . . . . . . . . . . . . . . . . 52 261 thru 272 . . . . . . . . . . . . . . . . . . . . . 30 1005 thru 1008 . . . . . . . . . . . . . . . . . . . 54 1287. . . . . . . . . . . . . . . . . . . . . . . . . . . 53 288 thru 296 . . . . . . . . . . . . . . . . . . . . . 12 1010 thru 1011 . . . . . . . . . . . . . . . . . . . 20 1288. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 301. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1012. . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1289. . . . . . . . . . . . . . . . . . . . . . . . . . . 53 303-P . . . . . . . . . . . . . . . . . . . . . . . . . . 31 1012C. . . . . . . . . . . . . . . . . . . . . . . . . . 19 1290 thru 1291 . . . . . . . . . . . . . . . . . . . 31 330 thru 338 . . . . . . . . . . . . . . . . . . . . . 75 1013 thru 1015 . . . . . . . . . . . . . . . . . . . 18 1292. . . . . . . . . . . . . . . . . . . . . . . . . . . 53 340 thru 344 . . . . . . . . . . . . . . . . . . . . 132 1016. . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1293. . . . . . . . . . . . . . . . . . . . . . . . . . . 66 345 thru 349 . . . . . . . . . . . . . . . . . . . . 131 1017. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 1294 thru 1295 . . . . . . . . . . . . . . . . . . . 31 351 thru 359 . . . . . . . . . . . . . . . . . . . . . 75 1017-1 . . . . . . . . . . . . . . . . . . . . . . . . . 13 1298 thru 1299 . . . . . . . . . . . . . . . . . . . 66 361 thru 375 . . . . . . . . . . . . . . . . . . . . . 74 1018. . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1300 thru 1326 . . . . . . . . . . . . . . . . . . 135 376 thru 396 . . . . . . . . . . . . . . . . . . . . . 71 1018C. . . . . . . . . . . . . . . . . . . . . . . . . . 19 1345. . . . . . . . . . . . . . . . . . . . . . . . . . . 57 397 thru 438 . . . . . . . . . . . . . . . . . . . . . 74 1019. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 1352 thru 1365 . . . . . . . . . . . . . . . . . . 101 450 thru 452 . . . . . . . . . . . . . . . . . . . . 107 1020. . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1366 thru 1369 . . . . . . . . . . . . . . . . . . 100 453 thru 459 . . . . . . . . . . . . . . . . . . . . . 74 1020C. . . . . . . . . . . . . . . . . . . . . . . . . . 19 1370 thru 1371 . . . . . . . . . . . . . . . . . . 101 468 thru 471 . . . . . . . . . . . . . . . . . . . . . 71 1021. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 1372 thru 1373 . . . . . . . . . . . . . . . . . . 100 476. . . . . . . . . . . . . . . . . . . . . . . . . . . 107 1021-1 . . . . . . . . . . . . . . . . . . . . . . . . . 13 1375 thru 1377 . . . . . . . . . . . . . . . . . . 101 480 thru 496 . . . . . . . . . . . . . . . . . . . . . 87 1022. . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1378 thru 1379 . . . . . . . . . . . . . . . . . . 100 498 thru 504 . . . . . . . . . . . . . . . . . . . . . . 2 1022C. . . . . . . . . . . . . . . . . . . . . . . . . . 19 1380 thru 1400 . . . . . . . . . . . . . . . . . . 101 510 thru 526 . . . . . . . . . . . . . . . . . . . . . 87 1023. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 1401. . . . . . . . . . . . . . . . . . . . . . . . . . 100 540 thru 548 . . . . . . . . . . . . . . . . . . . . . 86 1024. . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1402. . . . . . . . . . . . . . . . . . . . . . . . . . 101 550. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1024C. . . . . . . . . . . . . . . . . . . . . . . . . . 19 1404. . . . . . . . . . . . . . . . . . . . . . . . . . 100 552. . . . . . . . . . . . . . . . . . . . . . . . . . . 106 1025. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1405. . . . . . . . . . . . . . . . . . . . . . . . . . 101 553 thru 557 . . . . . . . . . . . . . . . . . . . . . . 8 1025-7 . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1406 thru 1408 . . . . . . . . . . . . . . . . . . 100 561 thru 567 . . . . . . . . . . . . . . . . . . . . 102 1026. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1411 thru 1420 . . . . . . . . . . . . . . . . . . . 98 571 thru 573 . . . . . . . . . . . . . . . . . . . . 103 1027. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1421. . . . . . . . . . . . . . . . . . . . . . . . . . 100 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED NUMERICAL INDEX NUMERICAL INDEX CAT. PAGE CAT. PAGE CAT. PAGE 1422 – 1626 1627 – 3373 3381 – 4628 NO. NO. NO. NO. NO. NO. 1422. . . . . . . . . . . . . . . . . . . . . . . . . . 101 1627 thru 1630 . . . . . . . . . . . . . . . . . . . 73 3381 thru 3391 . . . . . . . . . . . . . . . . . . 134 1424. . . . . . . . . . . . . . . . . . . . . . . . . . 100 1633. . . . . . . . . . . . . . . . . . . . . . . . . . 139 3402 thru 3438 . . . . . . . . . . . . . . . . . . . 74 1425. . . . . . . . . . . . . . . . . . . . . . . . . . 101 1635 thru 1639 . . . . . . . . . . . . . . . . . . . 71 3440 thru 3450 . . . . . . . . . . . . . . . . . . 134 1426 thru 1428 . . . . . . . . . . . . . . . . . . 100 1640 thru 1641 . . . . . . . . . . . . . . . . . . . 99 3457 thru 3477 . . . . . . . . . . . . . . . . . . . 74 1430. . . . . . . . . . . . . . . . . . . . . . . . . . 101 1642 thru 1643 . . . . . . . . . . . . . . . . . . . 71 3478 thru 3500 . . . . . . . . . . . . . . . . . . . 71 1431 thru 1432 . . . . . . . . . . . . . . . . . . . 98 1644 thru 1646 . . . . . . . . . . . . . . . . . . . 70 3501 thru 3509 . . . . . . . . . . . . . . . . . . . 99 1434. . . . . . . . . . . . . . . . . . . . . . . . . . . 99 1650 thru 1655 . . . . . . . . . . . . . . . . . . . 73 3510 thru 3511 . . . . . . . . . . . . . . . . . . . 45 1435 thru 1436 . . . . . . . . . . . . . . . . . . . 98 1656 thru 1657 . . . . . . . . . . . . . . . . . . . 71 3512. . . . . . . . . . . . . . . . . . . . . . . . . . . 44 1437 thru 1438 . . . . . . . . . . . . . . . . . . . 99 1658 thru 1659 . . . . . . . . . . . . . . . . . . . 98 3513 thru 3516 . . . . . . . . . . . . . . . . . . . 45 1439. . . . . . . . . . . . . . . . . . . . . . . . . . . 98 1662 thru 1672 . . . . . . . . . . . . . . . . . . . 74 3517 thru 3521 . . . . . . . . . . . . . . . . . . . 44 1441 thru 1447 . . . . . . . . . . . . . . . . . . 101 1673 thru 1689 . . . . . . . . . . . . . . . . . . . 99 3522. . . . . . . . . . . . . . . . . . . . . . . . . . . 39 1448 thru 1449 . . . . . . . . . . . . . . . . . . . 84 1692. . . . . . . . . . . . . . . . . . . . . . . . . . . 71 3523. . . . . . . . . . . . . . . . . . . . . . . . . . . 42 1450 thru 1451 . . . . . . . . . . . . . . . . . . . 71 1693 thru 1699 . . . . . . . . . . . . . . . . . . . 98 3525. . . . . . . . . . . . . . . . . . . . . . . . . . . 55 1453. . . . . . . . . . . . . . . . . . . . . . . . . . . 84 1700 thru 1706 . . . . . . . . . . . . . . . . . . . 84 3526 thru 3527 . . . . . . . . . . . . . . . . . . . 42 1454. . . . . . . . . . . . . . . . . . . . . . . . . . . 74 1707. . . . . . . . . . . . . . . . . . . . . . . . . . 135 3528. . . . . . . . . . . . . . . . . . . . . . . . . . . 55 1455. . . . . . . . . . . . . . . . . . . . . . . . . . 101 1708 thru 1710 . . . . . . . . . . . . . . . . . . . 83 3529 thru 3533 . . . . . . . . . . . . . . . . . . . 45 1456. . . . . . . . . . . . . . . . . . . . . . . . . . . 84 1713 thru 1726 . . . . . . . . . . . . . . . . . . 135 3534. . . . . . . . . . . . . . . . . . . . . . . . . . . 55 1457. . . . . . . . . . . . . . . . . . . . . . . . . . . 74 1731 thru 1796 . . . . . . . . . . . . . . . . . . . 73 3535. . . . . . . . . . . . . . . . . . . . . . . . . . . 45 1458 thru 1459 . . . . . . . . . . . . . . . . . . . 84 1797 thru 1904 . . . . . . . . . . . . . . . . . . . 71 3536 thru 3543 . . . . . . . . . . . . . . . . . . . 43 1460 thru 1463 . . . . . . . . . . . . . . . . . . 101 1909 thru 1920 . . . . . . . . . . . . . . . . . . . 74 3544. . . . . . . . . . . . . . . . . . . . . . . . . . . 40 1464 thru 1467 . . . . . . . . . . . . . . . . . . . 84 1921 thru 1923 . . . . . . . . . . . . . . . . . . . 71 3545 thru 3548 . . . . . . . . . . . . . . . . . . . 55 1468 thru 1471 . . . . . . . . . . . . . . . . . . . 98 1924 thru 1925 . . . . . . . . . . . . . . . . . . . 74 3549. . . . . . . . . . . . . . . . . . . . . . . . . . . 40 1472. . . . . . . . . . . . . . . . . . . . . . . . . . . 84 1927 thru 1933 . . . . . . . . . . . . . . . . . . . 76 3550. . . . . . . . . . . . . . . . . . . . . . . . . . . 39 1473. . . . . . . . . . . . . . . . . . . . . . . . . . . 99 1934 thru 1942 . . . . . . . . . . . . . . . . . . . 74 3551. . . . . . . . . . . . . . . . . . . . . . . . . . . 55 1474 thru 1475 . . . . . . . . . . . . . . . . . . . 71 1944 thru 1966 . . . . . . . . . . . . . . . . . . . 70 3552 thru 3554 . . . . . . . . . . . . . . . . . . . 43 1476. . . . . . . . . . . . . . . . . . . . . . . . . . 109 1967 thru 2001 . . . . . . . . . . . . . . . . . . 100 3555. . . . . . . . . . . . . . . . . . . . . . . . . . . 38 1476. . . . . . . . . . . . . . . . . . . . . . . . . . 131 2002 thru 2005 . . . . . . . . . . . . . . . . . . . 54 3556. . . . . . . . . . . . . . . . . . . . . . . . . . . 43 1477. . . . . . . . . . . . . . . . . . . . . . . . . . 109 2025 thru 2031 . . . . . . . . . . . . . . . . . . . 71 3557. . . . . . . . . . . . . . . . . . . . . . . . . . . 39 1477. . . . . . . . . . . . . . . . . . . . . . . . . . 131 2032 thru 2036 . . . . . . . . . . . . . . . . . . . 74 3558 thru 3560 . . . . . . . . . . . . . . . . . . . 38 1478. . . . . . . . . . . . . . . . . . . . . . . . . . . 98 2037 thru 2053 . . . . . . . . . . . . . . . . . . . 85 3561 thru 3562 . . . . . . . . . . . . . . . . . . . 44 1479. . . . . . . . . . . . . . . . . . . . . . . . . . . 99 2060 thru 2073 . . . . . . . . . . . . . . . . . . . 82 3563 thru 3564 . . . . . . . . . . . . . . . . . . . 40 1480 thru 1484 . . . . . . . . . . . . . . . . . . . 74 2087 thru 2099 . . . . . . . . . . . . . . . . . . . 70 3565 thru 3566 . . . . . . . . . . . . . . . . . . . 44 1485. . . . . . . . . . . . . . . . . . . . . . . . . . 131 2103. . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3567. . . . . . . . . . . . . . . . . . . . . . . . . . . 45 1486. . . . . . . . . . . . . . . . . . . . . . . . . . . 99 2119 thru 2131 . . . . . . . . . . . . . . . . . . . 70 3568. . . . . . . . . . . . . . . . . . . . . . . . . . . 40 1487. . . . . . . . . . . . . . . . . . . . . . . . . . 101 2139 thru 2140 . . . . . . . . . . . . . . . . . . . 24 3569. . . . . . . . . . . . . . . . . . . . . . . . . . . 41 1488. . . . . . . . . . . . . . . . . . . . . . . . . . . 99 2149 thru 2161 . . . . . . . . . . . . . . . . . . . 70 3570. . . . . . . . . . . . . . . . . . . . . . . . . . . 45 1490 thru 1494 . . . . . . . . . . . . . . . . . . . 74 2162 thru 2176 . . . . . . . . . . . . . . . . . . . 24 3571 thru 3572 . . . . . . . . . . . . . . . . . . . 55 1495. . . . . . . . . . . . . . . . . . . . . . . . . . 123 2180 thru 2181 . . . . . . . . . . . . . . . . . . . 70 3573. . . . . . . . . . . . . . . . . . . . . . . . . . . 39 1496 thru 1497 . . . . . . . . . . . . . . . . . . . 99 2182 thru 2199 . . . . . . . . . . . . . . . . . . . 24 3574. . . . . . . . . . . . . . . . . . . . . . . . . . . 43 1498 thru 1500 . . . . . . . . . . . . . . . . . . 123 2201 thru 2221 . . . . . . . . . . . . . . . . . . . 71 3574C. . . . . . . . . . . . . . . . . . . . . . . . . . 43 1502 thru 1503 . . . . . . . . . . . . . . . . . . 138 2222 thru 2233 . . . . . . . . . . . . . . . . . . . 21 3575. . . . . . . . . . . . . . . . . . . . . . . . . . . 55 1507. . . . . . . . . . . . . . . . . . . . . . . . . . 139 2238 thru 2243 . . . . . . . . . . . . . . . . . . . 28 3576. . . . . . . . . . . . . . . . . . . . . . . . . . . 43 1508. . . . . . . . . . . . . . . . . . . . . . . . . . 138 2244 thru 2253 . . . . . . . . . . . . . . . . . . 131 3576C. . . . . . . . . . . . . . . . . . . . . . . . . . 43 1509 thru 1511 . . . . . . . . . . . . . . . . . . 139 2260 thru 2274 . . . . . . . . . . . . . . . . . . . 73 3577 thru 3578 . . . . . . . . . . . . . . . . . . . 55 1514. . . . . . . . . . . . . . . . . . . . . . . . . . 138 2284 thru 2293 . . . . . . . . . . . . . . . . . . 131 3586 thru 3588 . . . . . . . . . . . . . . . . . . . 41 1515 thru 1519 . . . . . . . . . . . . . . . . . . 139 2314. . . . . . . . . . . . . . . . . . . . . . . . . . . 74 3590 thru 3592 . . . . . . . . . . . . . . . . . . . 98 1520. . . . . . . . . . . . . . . . . . . . . . . . . . 138 2341 thru 2398 . . . . . . . . . . . . . . . . . . . 75 3593 thru 3595 . . . . . . . . . . . . . . . . . . . 99 1525 thru 1526 . . . . . . . . . . . . . . . . . . 139 2400 thru 2420 . . . . . . . . . . . . . . . . . . . 83 3621 thru 3622 . . . . . . . . . . . . . . . . . . . 44 1527 thru 1532 . . . . . . . . . . . . . . . . . . 138 2421 thru 2455 . . . . . . . . . . . . . . . . . . . 84 4000 thru 4004 . . . . . . . . . . . . . . . . . . . 58 1533. . . . . . . . . . . . . . . . . . . . . . . . . . 139 2460 thru 2473 . . . . . . . . . . . . . . . . . . . 26 4005. . . . . . . . . . . . . . . . . . . . . . . . . . . 54 1535 thru 1537 . . . . . . . . . . . . . . . . . . . 67 2474 thru 2476 . . . . . . . . . . . . . . . . . . . 27 4056 thru 4060 . . . . . . . . . . . . . . . . . . 142 1540 thru 1545 . . . . . . . . . . . . . . . . . . 139 2477 thru 2482 . . . . . . . . . . . . . . . . . . . 26 4091 thru 4094 . . . . . . . . . . . . . . . . . . 108 1546. . . . . . . . . . . . . . . . . . . . . . . . . . . 73 2484. . . . . . . . . . . . . . . . . . . . . . . . . . . 27 4095. . . . . . . . . . . . . . . . . . . . . . . . . . . 54 1547 thru 1548 . . . . . . . . . . . . . . . . . . . 71 2485 thru 2486 . . . . . . . . . . . . . . . . . . . 26 4096 thru 4109 . . . . . . . . . . . . . . . . . . 108 1556. . . . . . . . . . . . . . . . . . . . . . . . . . 115 2487 thru 2490 . . . . . . . . . . . . . . . . . . . 27 4116 thru 4120 . . . . . . . . . . . . . . . . . . 142 1557 thru 1559 . . . . . . . . . . . . . . . . . . 139 2500 thru 2508 . . . . . . . . . . . . . . . . . . . 83 4147 thru 4196 . . . . . . . . . . . . . . . . . . 143 1560 thru 1561 . . . . . . . . . . . . . . . . . . . 73 2915. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4198 thru 4199 . . . . . . . . . . . . . . . . . . 108 1562. . . . . . . . . . . . . . . . . . . . . . . . . . 139 2981 thru 2983 . . . . . . . . . . . . . . . . . . . . 7 4245. . . . . . . . . . . . . . . . . . . . . . . . . . . 42 1563. . . . . . . . . . . . . . . . . . . . . . . . . . 138 2988 thru 2989 . . . . . . . . . . . . . . . . . . . . 6 4245C. . . . . . . . . . . . . . . . . . . . . . . . . . 43 1564 thru 1571 . . . . . . . . . . . . . . . . . . 115 2990 thru 2993 . . . . . . . . . . . . . . . . . . . . 7 4246 thru 4247 . . . . . . . . . . . . . . . . . . . 45 1572 thru 1573 . . . . . . . . . . . . . . . . . . 138 2994 thru 2999 . . . . . . . . . . . . . . . . . . . . 6 4250. . . . . . . . . . . . . . . . . . . . . . . . . . . 42 1575 thru 1583 . . . . . . . . . . . . . . . . . . 139 3000 thru 3013 . . . . . . . . . . . . . . . . . . . . 7 4258 thru 4269 . . . . . . . . . . . . . . . . . . . 74 1587. . . . . . . . . . . . . . . . . . . . . . . . . . 138 3020 thru 3025 . . . . . . . . . . . . . . . . . . . . 4 4325 thru 4326 . . . . . . . . . . . . . . . . . . 115 1589 thru 1591 . . . . . . . . . . . . . . . . . . . 73 3026 thru 3029 . . . . . . . . . . . . . . . . . . . . 7 4332 thru 4334 . . . . . . . . . . . . . . . . . . 114 1592. . . . . . . . . . . . . . . . . . . . . . . . . . 139 3030 thru 3031 . . . . . . . . . . . . . . . . . . . . 6 4335 thru 4337 . . . . . . . . . . . . . . . . . . 115 1593 thru 1595 . . . . . . . . . . . . . . . . . . 138 3032 thru 3044 . . . . . . . . . . . . . . . . . . . . 7 4341 thru 4343 . . . . . . . . . . . . . . . . . . 132 1596. . . . . . . . . . . . . . . . . . . . . . . . . . . 73 3049. . . . . . . . . . . . . . . . . . . . . . . . . . 132 4401 thru 4405 . . . . . . . . . . . . . . . . . . 142 1598. . . . . . . . . . . . . . . . . . . . . . . . . . 138 3050. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4469 thru 4474 . . . . . . . . . . . . . . . . . . . 56 1601. . . . . . . . . . . . . . . . . . . . . . . . . . 104 3051 thru 3069 . . . . . . . . . . . . . . . . . . 132 4513 thru 4516 . . . . . . . . . . . . . . . . . . 111 1603. . . . . . . . . . . . . . . . . . . . . . . . . . . 98 3070 thru 3074 . . . . . . . . . . . . . . . . . . . . 4 4525 thru 4527 . . . . . . . . . . . . . . . . . . . 42 1604 thru 1605 . . . . . . . . . . . . . . . . . . . 73 3075 thru 3077 . . . . . . . . . . . . . . . . . . 134 4527C. . . . . . . . . . . . . . . . . . . . . . . . . . 42 1606 thru 1607 . . . . . . . . . . . . . . . . . . . 98 3078 thru 3092 . . . . . . . . . . . . . . . . . . . . 7 4590 thru 4600 . . . . . . . . . . . . . . . . . . 110 1608 thru 1612 . . . . . . . . . . . . . . . . . . . 73 3096 thru 3098 . . . . . . . . . . . . . . . . . . . . 6 4601 thru 4609 . . . . . . . . . . . . . . . . . . 111 1613. . . . . . . . . . . . . . . . . . . . . . . . . . 139 3101 thru 3110 . . . . . . . . . . . . . . . . . . 132 4616 thru 4617 . . . . . . . . . . . . . . . . . . 110 1614 thru 1619 . . . . . . . . . . . . . . . . . . . 98 3111 thru 3228 . . . . . . . . . . . . . . . . . . 131 4618 thru 4620 . . . . . . . . . . . . . . . . . . 111 1620 thru 1625 . . . . . . . . . . . . . . . . . . . 73 3229 thru 3241 . . . . . . . . . . . . . . . . . . 132 4626. . . . . . . . . . . . . . . . . . . . . . . . . . 110 1626. . . . . . . . . . . . . . . . . . . . . . . . . . . 98 3347 thru 3373 . . . . . . . . . . . . . . . . . . 131 4628. . . . . . . . . . . . . . . . . . . . . . . . . . . 42 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED CAT. PAGE CAT. PAGE CAT. PAGE 4628C – 7689 7690 – 9200-17 9200-19 – TL-22 NO. NO. NO. NO. NO. NO. 4628C. . . . . . . . . . . . . . . . . . . . . . . . . . 42 7690 thru 7693 . . . . . . . . . . . . . . . . . . . 62 9200-19 . . . . . . . . . . . . . . . . . . . . . . . 120 4632 thru 4634 . . . . . . . . . . . . . . . . . . 110 7690-SEMS thru 7693-SEMS . . . . . . . . . 64 9201-1 thru 9204-1 . . . . . . . . . . . . . . . 121 4636 thru 4683 . . . . . . . . . . . . . . . . . . 109 7695 thru 7696 . . . . . . . . . . . . . . . . . . . 65 9207-1 thru 9231-1 . . . . . . . . . . . . . . . 120 4684. . . . . . . . . . . . . . . . . . . . . . . . . . 111 7697. . . . . . . . . . . . . . . . . . . . . . . . . . . 63 9300 thru 9357 . . . . . . . . . . . . . . . . . . 133 4687 thru 4689 . . . . . . . . . . . . . . . . . . 132 7697-SEMS . . . . . . . . . . . . . . . . . . . . . . 64 9400 thru 9457 . . . . . . . . . . . . . . . . . . 133 4690. . . . . . . . . . . . . . . . . . . . . . . . . . 109 7698. . . . . . . . . . . . . . . . . . . . . . . . . . . 65 9500 thru 9581 . . . . . . . . . . . . . . . . . . 133 4691 thru 4693 . . . . . . . . . . . . . . . . . . 131 7699. . . . . . . . . . . . . . . . . . . . . . . . . . . 63 9600 thru 9604 . . . . . . . . . . . . . . . . . . 132 4694. . . . . . . . . . . . . . . . . . . . . . . . . . 132 7699-SEMS . . . . . . . . . . . . . . . . . . . . . . 64 9605 thru 9608 . . . . . . . . . . . . . . . . . . 133 4696. . . . . . . . . . . . . . . . . . . . . . . . . . 109 7700 thru 7702 . . . . . . . . . . . . . . . . . . . 62 9900 thru 9911 . . . . . . . . . . . . . . . . . . . 87 4698. . . . . . . . . . . . . . . . . . . . . . . . . . 132 7700-SEMS thru 7702-SEMS . . . . . . . . . 64 9920. . . . . . . . . . . . . . . . . . . . . . . . . . . 64 4699 thru 4700 . . . . . . . . . . . . . . . . . . 131 7710 thru 7720 . . . . . . . . . . . . . . . . . . . 74 11001 thru 11016 . . . . . . . . . . . . . . . . 105 4701 thru 4702 . . . . . . . . . . . . . . . . . . 132 7760 thru 7772 . . . . . . . . . . . . . . . . . . . 65 11065 thru 11076 . . . . . . . . . . . . . . . . 136 4703. . . . . . . . . . . . . . . . . . . . . . . . . . 131 7773 thru 7774 . . . . . . . . . . . . . . . . . . . 62 11100 thru 11116 . . . . . . . . . . . . . . . . 137 4704. . . . . . . . . . . . . . . . . . . . . . . . . . . 58 7775. . . . . . . . . . . . . . . . . . . . . . . . . . . 63 11150 thru 11160 . . . . . . . . . . . . . . . . 136 4704. . . . . . . . . . . . . . . . . . . . . . . . . . 109 7778. . . . . . . . . . . . . . . . . . . . . . . . . . . 63 11216 thru 11218 . . . . . . . . . . . . . . . . 136 4705. . . . . . . . . . . . . . . . . . . . . . . . . . 132 7778-SEMS . . . . . . . . . . . . . . . . . . . . . . 64 11250 thru 11251 . . . . . . . . . . . . . . . . 136 4706. . . . . . . . . . . . . . . . . . . . . . . . . . 111 7779 thru 7783 . . . . . . . . . . . . . . . . . . . 62 11300 thru 11312 . . . . . . . . . . . . . . . . 136 4707 thru 4711 . . . . . . . . . . . . . . . . . . 132 7784 thru 7791 . . . . . . . . . . . . . . . . . . . 63 11320 thru 11322 . . . . . . . . . . . . . . . . 136 4712. . . . . . . . . . . . . . . . . . . . . . . . . . 109 7792 thru 7800 . . . . . . . . . . . . . . . . . . . 65 11350 thru 11362 . . . . . . . . . . . . . . . . 137 4713 thru 4716 . . . . . . . . . . . . . . . . . . 132 7802 thru 7806 . . . . . . . . . . . . . . . . . . . 54 11362-5 . . . . . . . . . . . . . . . . . . . . . . . 131 4724 thru 4730 . . . . . . . . . . . . . . . . . . 109 7807 thru 7808 . . . . . . . . . . . . . . . . . . . 65 11363 thru 11513 . . . . . . . . . . . . . . . . 137 4732 thru 4734 . . . . . . . . . . . . . . . . . . 111 7812 thru 7836 . . . . . . . . . . . . . . . . . . . 54 15021 thru 15099 . . . . . . . . . . . . . . . . 140 4799 thru 4841 . . . . . . . . . . . . . . . . . . . 70 8090 thru 8096 . . . . . . . . . . . . . . . . . . 127 15101 thru 15130 . . . . . . . . . . . . . . . . 142 4850 thru 4870 . . . . . . . . . . . . . . . . . . . 73 8100 thru 8173 . . . . . . . . . . . . . . . . . . 126 15221 thru 15299 . . . . . . . . . . . . . . . . 140 4900. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 8174. . . . . . . . . . . . . . . . . . . . . . . . . . . 63 15301 thru 15330 . . . . . . . . . . . . . . . . 142 4901 thru 4902 . . . . . . . . . . . . . . . . . . . 53 8189 thru 8195 . . . . . . . . . . . . . . . . . . . 62 15401 thru 15545 . . . . . . . . . . . . . . . . 141 4903 thru 4907 . . . . . . . . . . . . . . . . . . . 52 8196 thru 8199 . . . . . . . . . . . . . . . . . . . 63 24283 thru 24306 . . . . . . . . . . . . . . . . . 72 4908. . . . . . . . . . . . . . . . . . . . . . . . . . . 53 8189-SEMS thru 8199-SEMS . . . . . . . . . 64 24307 thru 24330 . . . . . . . . . . . . . . . . . 72 4909. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 8200 thru 8271 . . . . . . . . . . . . . . . . . . . 57 24331 thru 24354 . . . . . . . . . . . . . . . . . 72 4910 thru 4914 . . . . . . . . . . . . . . . . . . . 53 8272 thru 8300 . . . . . . . . . . . . . . . . . . . 56 24380 thru 24418 . . . . . . . . . . . . . . . . . 72 4915 thru 4920 . . . . . . . . . . . . . . . . . . . 52 8309 thru 8310 . . . . . . . . . . . . . . . . . . . 90 24420 thru 24458 . . . . . . . . . . . . . . . . . 72 4950 thru 4954 . . . . . . . . . . . . . . . . . . . 59 8311 thru 8342 . . . . . . . . . . . . . . . . . . . 91 24460 thru 24498 . . . . . . . . . . . . . . . . . 72 4966. . . . . . . . . . . . . . . . . . . . . . . . . . . 53 8351 thru 8356 . . . . . . . . . . . . . . . . . . . 86 25501 thru 25515 . . . . . . . . . . . . . . . . . 72 5000 thru 5014 . . . . . . . . . . . . . . . . . . . 60 8400 thru 8440 . . . . . . . . . . . . . . . . . . . 70 25521 thru 25535 . . . . . . . . . . . . . . . . . 72 5015 thru 5019 . . . . . . . . . . . . . . . . . . . 61 8440A thru 8440G . . . . . . . . . . . . . . . . . 71 29301 thru 29328 . . . . . . . . . . . . . . . . . 72 5020 thru 5026 . . . . . . . . . . . . . . . . . . . 60 8441 thru 8442 . . . . . . . . . . . . . . . . . . . 71 29331 thru 29358 . . . . . . . . . . . . . . . . . 72 5029. . . . . . . . . . . . . . . . . . . . . . . . . . . 61 8443 thru 8446 . . . . . . . . . . . . . . . . . . . 88 CBH. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 5033 thru 5048 . . . . . . . . . . . . . . . . . . . 61 8447 thru 8457 . . . . . . . . . . . . . . . . . . . 89 MS27249-1B1 thru -5B5. . . . . . . . . . . . 141 5058 thru 5065 . . . . . . . . . . . . . . . . . . . 73 8470 thru 8486 . . . . . . . . . . . . . . . . . . 128 MS27249-1E1 thru 5E5 . . . . . . . . . . . . 141 5070 thru 5083 . . . . . . . . . . . . . . . . . . 123 8487 thru 8489 . . . . . . . . . . . . . . . . . . . 88 PC104 . . . . . . . . . . . . . . . . . . . . . . . . . . 70 5115 thru 5129 . . . . . . . . . . . . . . . . . . . 60 8490 thru 9496 . . . . . . . . . . . . . . . . . . 128 SCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 5201. . . . . . . . . . . . . . . . . . . . . . . . . . . 15 8497 thru 8499 . . . . . . . . . . . . . . . . . . . 88 SPR. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 5202 thru 5204 . . . . . . . . . . . . . . . . . . . 14 8554 thru 8569 . . . . . . . . . . . . . . . . . . . 85 STH . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 5205 thru 5209 . . . . . . . . . . . . . . . . . . . 13 8600 thru 8613 . . . . . . . . . . . . . . . . . . 128 STR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 5210 thru 5212 . . . . . . . . . . . . . . . . . . . 15 8615 thru 8617 . . . . . . . . . . . . . . . . . . 129 TL-1 thru TL-2 . . . . . . . . . . . . . . . . . . . . 138 5213 thru 5214 . . . . . . . . . . . . . . . . . . . 14 8620 thru 8644 . . . . . . . . . . . . . . . . . . 116 TL-3 thru TL-4 . . . . . . . . . . . . . . . . . . . . 139 5217 thru 5223 . . . . . . . . . . . . . . . . . . . 15 8645 thru 8649 . . . . . . . . . . . . . . . . . . 117 TL-5 thru TL-8 . . . . . . . . . . . . . . . . . . . . 138 5224 thru 5228 . . . . . . . . . . . . . . . . . . . 14 8650 thru 8692 . . . . . . . . . . . . . . . . . . . 90 TL-9. . . . . . . . . . . . . . . . . . . . . . . . . . . 139 5230 thru 5231 . . . . . . . . . . . . . . . . . . . . 8 8700 thru 8711 . . . . . . . . . . . . . . . . . . . 83 TL-11. . . . . . . . . . . . . . . . . . . . . . . . . . 123 5240 thru 5253 . . . . . . . . . . . . . . . . . . . 16 8712 thru 8729 . . . . . . . . . . . . . . . . . . . 70 TL-12. . . . . . . . . . . . . . . . . . . . . . . . . . 139 5330 thru 5331 . . . . . . . . . . . . . . . . . . . . 8 8730. . . . . . . . . . . . . . . . . . . . . . . . . . . 66 TL-19 thru TL-22 . . . . . . . . . . . . . . . . . . . 73 5799. . . . . . . . . . . . . . . . . . . . . . . . . . . 70 8731 thru 8733 . . . . . . . . . . . . . . . . . . . 70 6000 thru 6035 . . . . . . . . . . . . . . . . . . 104 8737. . . . . . . . . . . . . . . . . . . . . . . . . . . 66 6036 thru 6071 . . . . . . . . . . . . . . . . . . 105 8799. . . . . . . . . . . . . . . . . . . . . . . . . . . 70 6072 thru 6075 . . . . . . . . . . . . . . . . . . 106 8800 thru 8821 . . . . . . . . . . . . . . . . . . . 76 6076 thru 6077 . . . . . . . . . . . . . . . . . . 107 8822 thru 8828 . . . . . . . . . . . . . . . . . . . 78 6078 thru 6085 . . . . . . . . . . . . . . . . . . 106 8829 thru 8842 . . . . . . . . . . . . . . . . . . . 77 6090 thru 6096 . . . . . . . . . . . . . . . . . . 107 8843 thru 8851 . . . . . . . . . . . . . . . . . . . 72 6097. . . . . . . . . . . . . . . . . . . . . . . . . . 104 8860 thru 8870 . . . . . . . . . . . . . . . . . . 127 6799. . . . . . . . . . . . . . . . . . . . . . . . . . . 70 8871 thru 8875 . . . . . . . . . . . . . . . . . . . 76 7004 thru 7024 . . . . . . . . . . . . . . . . . . 108 8879 thru 8893 . . . . . . . . . . . . . . . . . . . 77 7030 thru 7061 . . . . . . . . . . . . . . . . . . . 91 8900 thru 8931 . . . . . . . . . . . . . . . . . . . 91 7140 thru 7181 . . . . . . . . . . . . . . . . . . . 87 9018 thru 9054 . . . . . . . . . . . . . . . . . . . 77 7186 thru 7188 . . . . . . . . . . . . . . . . . . . 86 9055 thru 9084 . . . . . . . . . . . . . . . . . . . 78 7192 thru 7194 . . . . . . . . . . . . . . . . . . . 87 9090. . . . . . . . . . . . . . . . . . . . . . . . . . 133 7196. . . . . . . . . . . . . . . . . . . . . . . . . . . 86 9100 thru 9123 . . . . . . . . . . . . . . . . . . . 87 7200 thru 7225 . . . . . . . . . . . . . . . . . . . 70 9190 thru 9191 . . . . . . . . . . . . . . . . . . 133 7228 thru 7235 . . . . . . . . . . . . . . . . . . . 82 9200 thru 9204 . . . . . . . . . . . . . . . . . . 118 7235-1 thru 7235-2 . . . . . . . . . . . . . . . 131 9205 thru 9231 . . . . . . . . . . . . . . . . . . 119 7236 thru 7299 . . . . . . . . . . . . . . . . . . . 82 9200-1 thru 9200-5 . . . . . . . . . . . . . . . 120 7311 thru 7340 . . . . . . . . . . . . . . . . . . . 58 9200-6 thru 9200-10 . . . . . . . . . . . . . . 121 7351 thru 7382 . . . . . . . . . . . . . . . . . . . 91 9200-11 . . . . . . . . . . . . . . . . . . . . . . . 120 7600 thru 7611 . . . . . . . . . . . . . . . . . . 128 9200-12 thru 900-13 . . . . . . . . . . . . . . 121 7620 thru 7640 . . . . . . . . . . . . . . . . . . 127 9200-14 . . . . . . . . . . . . . . . . . . . . . . . 120 7661 thru 7678 . . . . . . . . . . . . . . . . . . . 74 9200-15 . . . . . . . . . . . . . . . . . . . . . . . 121 7680 thru 7688 . . . . . . . . . . . . . . . . . . 132 9200-16 . . . . . . . . . . . . . . . . . . . . . . . 120 7689. . . . . . . . . . . . . . . . . . . . . . . . . . . 65 9200-17 . . . . . . . . . . . . . . . . . . . . . . . 121 ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED NUMERICAL INDEX For over sixty years, Keystone has been designing and manufacturing quality interconnects and electronic hardware. Our engineering and design specialists utilize the most advanced design and production capabilities such as 3D CAD modeling to develop innovative and reliable products for the marketplace. Add to this a commit- ment to solving design challenges, backed by skilled and experienced production and customer service teams. Precision tool and die CAD/CAM capabilities, close tolerance stamping, machining and assembly, computer based quality control and responsive customer service are all vital in-house resources which constitute Keystone’s capabilities. While our catalog products meet most standard requirements, our Application Engineering Group is always available to modify our existing items or to design and develop specific products for your applications. Our products are in compliance with the RoHS and REACH directives and our quality system is ISO 9001:2008 certified. It is Keystone’s quality policy to continuously improve its products to better satisfy the needs of its customers and to deliver quality products, every time, on time. Visit our website at www.keyelco.com for additional information and on-line services, such as: • Stock Check Capabilities • Engineering Drawing requests • Sample and Quotation requests • Complete listing of our Authorized Stocking Distributors worldwide All products unconditionally guaranteed against defects in material and workmanship. Keystone components are guaranteed to be free from defects in material and workmanship for supplements without prior notice providing the performance or appearance will not change the a reasonable period of time after delivery. Our liability shall be limited to replacement of defective function of the item. FEDERAL SUPPLY CODE material only. Neither seller or manufacturer shall be liable for any injury, loss or damage, direct Keystone has carefully prepared the catalog specifications contained herein. These specifica- FSCM or consequential, rising out of the use of or the inability to use the products. Before using, user tions are for reference only, any inaccuracies may be due to typographical errors or changes shall determine the suitability of the product for their intended use, user assumes all risk and made after the publication of this catalog. 91833 liability whatsoever in connection therewith. © Copyright 2013 by Keystone Electronics Corp. Printed in U.S.A. We reserve the right to change specifications on any and all items shown in this catalog or any ® Tel (718) 956-8900 • Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED DISTRIBUTED BY: ® Corporate and Manufacturing Headquarters 31-07 20th Road, Astoria, New York 11105-2017 Tel: (718) 956-8900 (800) 221-5510 Fax: (718) 956-9040 s s Website: www.keyelco.com e-mail: kec@keyelco.com s INTERNATIONAL OFFICES KEYSTONE/EUROPE (EMEA) KEYSTONE/CANADA KEYSTONE/ASIA – PACIFIC KEYSTONE/AUSTRALIA 250 Granton Drive Flat E, 5/F., Everest Industrial Centre 10 Gray Street 80, Rue Orfila, Richmond Hill, Ontario No.396 Kwun Tong Road, Kilkenny, South Australia 5009 75020 Paris, France Canada L4B1H7 Kowloon, Hong Kong Tel: 61-8-8268-2733 Tel: 33 (1) 46 36 82 49 Tel: (905) 764-0040 Tel: +852 2305 2229 Fax: 61-8-8268-1455 Fax: 33 (1) 46 36 81 57 Fax: (905) 764-0076 Fax: +852 2305 2666 There’s a keystone in every great invention … Follow, THiNK & Learn at: