KEYSTONE ELECTRONICS 9201
Specifications
Manufacturer
Keystone Electronics
Manufacturers Part #
9201
Industry Aliases
9201
Sub-Category
Mounting Brackets
Factory Pack Quantity
1
Datasheet
Extracted Text
M60 Section 7 FREV1A1_11-2011 3/26/13 3:17 PM Page 118 STANDARD BLANK BRACKETS These computer brackets have been designed EISA/ISA to accommodate a large variety of board sizes and heights. Available with tabs located properly for ESA/EISA or PCI formats. Blanks can be machined or stamped for prototype or low volume production. All .174 brackets are nickel plated for a clean look and a pro- [4.4] 4.725 [120.0] .250 [6.4] tective finish. Standard cut-outs can be added to 4.440 [112.8] .125 .120 these blanks to suit your specific production needs. [3.2] .187 [4.8] DIA. [3.1] See page 118-119 for standard cut-outs and design .740 .720 worksheet. [18.8] [18.3] .317 • Premium quality .450 [8.1] 2.225 [56.5] 1.250 [31.8] [11.5] .401 .110 • Designed to fit all PC computers height [10.2] 4.213 [107.0] [2.8] brackets available • Blanks available for “fillers” .210 [5.4] • Fast delivery and cost effective tooling for special designs .350 [8.9] 4-40 THREAD (2) PLS .240 [6.1] (2) PLS CAT. NO. 9202 MATERIAL: .032 (.81) Steel, Matte Nickel Plate. PCI .174 .174 [4.4] 4.725 [120.0] [4.4] 4.725 [120.0] .250 [6.4] .250 [6.4] 4.440 [112.8] 4.440 [112.8] .125 .125 .120 .120 .250 [6.4] [3.2] [3.2] [3.1] [3.1] .187 [4.8] DIA. .250 [6.4] .187 [4.8] DIA. .750 .750 .725 .725 [19.1] [19.1] [18.4] [18.4] .330 .330 .450 .450 .609 [15.5] [8.4] .398 [10.1] .100 [8.4] [11.5] [11.5] .401 .401 .100 4.213 [107.0] [2.6] 3.362 [85.4] [10.2] [10.2] [2.6] 4.213 [107.0] .177 [4.5] .343 [8.7] .295 [7.5] 4-40 THREAD .467 [11.9] .240 [6.1] 4-40 THREAD (2) PLS .310 [7.9] (2) PLS CAT. NO. 9203 CAT. NO. 9204 EISA/ISA or PCI • Reinforced with rib for extra strength .174 [4.4] .174 4.725 [120.0] .250 [6.4] [4.4] 4.725 [120.0] 4.440 [112.8] .125 .250 [6.4] .120 [3.2] 4.440 [112.8] .125 [3.1] .187 [4.8] DIA. .120 [3.2] .187 [4.8] DIA. [3.1] .750 .642 .725 .750 [19.1] [16.3] .725 [18.4] [19.1] [18.4] .330 .450 [8.4] .330 .100 .401 [11.5] .450 4.130 [104.9] [8.4] [2.6] 4.213 [107.0] .100 [10.2] [11.5] .401 4.213 [107.0] [2.6] [10.2] 4.362 [110.8] P/N 9201 CAT. NO. 9200 CAT. NO. 9201 118 Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED COMPUTER BRACKETS COMPUTER BRACKETS M60 Section 7 FREV1A1_11-2011 3/26/13 3:17 PM Page 119 STANDARD BLANK BRACKETS EISA/ISA 4.725 [120.0] .174 .174 [4.4] [4.4] 4.725 [120.0] 4.440 [112.8] .250 [6.4] .250 [6.4] 4.440 [112.8] 4.213 [107.0] .120 .120 .125 [3.2] .125 [3.2] .187 [4.8] DIA. [3.1] [3.1] .187 [4.8] DIA. .750 .740 .725 .740 [18.8] .791 [20.1] .725 [19.1] [18.8] [18.4] [18.4] .327 .450 .327 .450 .551 [14.0] [8.3] .110 [11.5] [8.3] .401 .100 [11.5] .401 [2.8] 2.402 [61.0] [10.2] 3.429 [87.1] [2.6] [10.2] .250 [6.4] .453 [11.5] .229 [5.8] .110 [2.8] REF. .305 [7.8] (2) PLS .547 [13.9] .330 [8.4] 4-40 THREAD (2) PLS 4-40 THREAD .315 [8.0] (2) PLS .395 [10.1] (2) PLS (2) PLS .315 [8.0] .315 [8.0] 3.500 [88.9] CAT. NO. 9205 CAT. NO. 9206 4.725 [120.0] 4.725 [120.0] .174 [4.4] .174 [4.4] 4.440 [112.8] 4.440 [112.8] .740 .250 [6.4] .250 [6.4] [18.8] 4.213 [107.0] .120 .125 4.213 [107.0] .120 .125 [3.2] [3.1] [3.2] .187 [4.8] DIA. .187 [4.8] DIA. [3.1] .850 .791 .758 .725 .725 .850 [21.6] [20.1] [21.6] [19.3] [18.4] [18.4] .235 .327 [6.0] .450 [11.5] .450 [11.5] 3.504 [89.0] [8.3] .092 [2.4] .401 .401 (2) PLS .490 [12.5] [10.2] [10.2] .453 [11.5] .273 [7.0] 4-40 THREAD .547 [13.9] .642 [16.3] .736 [18.7] (2) PLS 4-40 THREAD .472 [12.0] .421 [10.7] .075 [1.9] (2) PLS .315 [8.0] .310 [7.9] .047 [1.2] (2) PLS (2) PLS 3.575 [90.8] 3.500 [88.9] CAT. NO. 9207 CAT. NO. 9208 LOW PROFILE BLANK BRACKETS 3.118 [79.2] .466 [11.9] 3.118 [79.2] .466 [11.9] 2.814 [71.5] .120 [3.05] .120 [3.05] .341 [8.7] 2.814 [71.5] (EMI DIMPLE) .190 [4.9] 2.122 [53.9] (EMI DIMPLE) .725 .725 .557 [14.2] .675 [17.2] .866 [22.0] [18.4] [18.4] .732 [18.6] .732 [18.6] .141 [3.6] .174 [4.4] .401 .141 [3.6] .401 .125 [3.2] [10.2] [10.2] .031 [0.79] .216 [5.5] DIMPLE .340 [8.7] 4-40 THREAD (2) PLS CAT. NO. 9230 CAT. NO. 9231 119 Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED M60 Section 7 FREV1A1_11-2011 3/26/13 3:17 PM Page 120 STANDARD COMPUTER BRACKETS D-SUB These computer brackets have been designed with a production requirements, we can fabricate a bracket to • Peripherals • Video Cards variety of holes and cutouts to connect most peripherals. The your exact specifications. Refer to pages 122 - 123 for blank • Parallel/Serial Ports • External Hard Drives brackets shown reflect the most common configurations for dimensions and page 126 for standard cutout dimensions. • External CD Drives most applications. If our standard brackets do not fit your 9 PIN For Bracket Dimensions EISA/ISA For Bracket Dimensions PCI Refer to Cat. No. 9200 Refer to Cat. No. 9200 1.470 [37.4] 1.707 [43.4] CUTOUT TYPE 9 CUTOUT TYPE 9 1.962 [49.9] REF. 2.199 [55.9] REF. CAT. NO. 9200-1 CAT. NO. 9200-2 For Bracket Dimensions EISA/ISA For Bracket Dimensions EISA/ISA Refer to Cat. No. 9207 Refer to Cat. No. 9200 .578 [14.7] .578 [14.7] CUTOUT TYPE 9 CUTOUT TYPE 9 1.070 [27.2] REF. 1.070 [27.2] REF. CAT. NO. 9200-16 CAT. NO. 9207-1 15 PIN EISA/ISA EISA/ISA For Bracket Dimensions For Bracket Dimensions Refer to Cat. No. 9200 Refer to Cat. No. 9200 2.295 [58.3] 2.193 [55.7] CUTOUT TYPE 15 CUTOUT TYPE 15 2.950 [75.0] REF. 2.849 [72.4] REF. CAT. NO. 9200-11 CAT. NO. 9200-3 25 - 37 PIN EISA/ISA – 25 PIN EISA/ISA – 37 PIN For Bracket Dimensions For Bracket Dimensions Refer to Cat. No. 9200 Refer to Cat. No. 9200 1.883 [47.9] 1.004 [25.5] CUTOUT TYPE 37 CUTOUT TYPE 25 2.808 [71.3] REF. 2.254 [57.3] REF. CAT. NO. 9200-4 CAT. NO. 9200-5 50 PIN VENT For Bracket Dimensions EISA/ISA – 50 PIN EISA/ISA OR PCI Refer to Cat. No. 9200 .700 [17.8] CUTOUT TYPE 50 .125 [3.2] DIA. HOLE TYP. 1.903 [48.4] REF. CAT. NO. 9200-14 CAT. NO. 9200-19 LOW PROFILE ACCESS PORT For Bracket Dimensions Refer to Cat. No. 9231 .270 [6.9] .313 [8.0] 1.600 [40.7] .462 [11.8] CAT. NO. 9231-1 ® Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com 120 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED COMPUTER BRACKETS COMPUTER BRACKETS PHONE HAND SET LINE ISDN S-V IN VIDEO IN OUTPUT MIC INPUT AUDIO OUT AUDIO IN M60 Section 7 FREV1A1_11-2011 3/26/13 3:18 PM Page 121 MULTIPLE D-SUB For Bracket Dimensions For Bracket Dimensions EISA/ISA EISA/ISA Refer to Cat. No. 9200 Refer to Cat. No. 9200 2.193 [55.7] 1.883 [47.9] CUTOUT TYPE 15 CUTOUT TYPE 15 .593 [15.1] .320 [8.2] CUTOUT TYPE 25 (2) PLS 1.249 [31.8] REF. .976 [24.8] REF. 2.808 [71.3] REF. 2.849 [72.4] REF. CAT. NO. 9200-12 CAT. NO. 9200-13 For Bracket Dimensions For Bracket Dimensions EISA/ISA EISA/ISA Refer to Cat. No. 9200 Refer to Cat. No. 9200 2.408 [61.2] 1.883 [47.9] CUTOUT TYPE 9 CUTOUT TYPE 9 .578 [14.7] 1.008 [25.6] CUTOUT TYPE 25 (2) PLS 1.500 [38.1] REF. 1.070 [27.2] REF. 2.900 [73.7] REF. 2.809 [71.4] REF. CAT. NO. 9200-15 CAT. NO. 9200-17 SCSI For Bracket Dimensions For Bracket Dimensions SCSI 1 - 50 PIN SCSI 2, 3 & 4 - 50 PIN Refer to Cat. No. 9200 Refer to Cat. No. 9200 CUTOUT CUTOUT SCSI 1 .800 SCSI 2, 3 OR 4 1.509 [38.4] 50 PIN .088 [2.24] [20.3] 50 PIN .075 [1.91] 1.715 [43.6] REF. 2.424 [61.6] REF. CAT. NO. 9200-6 CAT. NO. 9200-8 For Bracket Dimensions For Bracket Dimensions SCSI 1 - 68 PIN SCSI 2, 3 & 4 - 68 PIN Refer to Cat. No. 9200 Refer to Cat. No. 9200 CUTOUT CUTOUT SCSI 1 SCSI 2, 3 OR 4 .920 [23.4] .982 [25.0] 68 PIN 68 PIN .088 [2.24] .080 [2.03] 2.060 [52.3] REF. 2.122 [53.9] REF. CAT. NO. 9200-7 CAT. NO. 9200-9 PERIPHERAL For Bracket Dimensions For Bracket Dimensions SOUND CARDS PCI EISA/ISA ISDN/PC FAX Refer to Cat. No. 9204 Refer to Cat. No. 9203 .280 [7.1] DIA. 1.975 [50.2] (3) PLS 1.550 [39.4] .640 [16.3] 2.305 [58.6] .525 [13.4] .480 [12.2] 1.765 [44.9] CUTOUT TYPE 15 .335 [8.5] .500 [12.7] 2.404 [61.1] CAT. NO. 9204-1 3.059 [77.7] REF. CAT. NO. 9203-1 For Bracket Dimensions For Bracket Dimensions PCI VIDEO CARDS EISA/ISA FAX - MODEM Refer to Cat. No. 9201 Refer to Cat. No. 9202 3.200 [81.3] 2.810 [71.4] .270 [6.9] DIA. 1.070 [27.2] .450 [11.5] (2) PLS 1.043 [26.5] 1.445 [36.7] .585 DIA. [14.9] .478 [12.2] (2) PLS 1.493 [37.9] CUTOUT TYPE 9 CAT. NO. 9201-1 1.985 [50.4] REF. CAT. NO. 9202-1 For Bracket Dimensions For Bracket Dimensions EISA/ISA OR PCI USB PCI NETWORK Refer to Cat. No. 9200 Refer to Cat. No. 9203 2.110 [53.6] 1.160 [29.5] 2.185 [55.5] 1.910 [48.5] 1.160 [29.5] .150 [3.8] DIA. 1.710 [43.5] .530 [13.5] (3) PLS .595 [15.1] .835 [21.2] (2) PLS .550 [14.0] .255 [6.5] (2) PLS .128 [3.3] DIA. (4) PLS .650 [16.5] .302 [7.7] CAT. NO. 9200-10 CAT. NO. 9203-2 ® Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com 121 (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED M60 Section 7 FREV1A1_11-2011 3/26/13 3:18 PM Page 122 CUSTOM BRACKET WORKSHEET EISI/ISA or PCI PCI with TABS 'Y' DATUM 'Y' DATUM '0 - 0' '0 - 0' 'X' DATUM 'X' DATUM '0 - 0' '0 - 0' 4-40 THREAD (2) PLS CAT. NO. 9200 3.362 [85.4] .398 [10.1] CAT. NO. 9201 (Ribbed) CAT. NO. 9230 CAT. NO. 9203 EISA/ISA with TABS EISA/ISA with TABS 'Y' DATUM 'Y' DATUM '0 - 0' '0 - 0' 'X' DATUM 'X' DATUM '0 - 0' '0 - 0' 4-40 THREAD (2) PLS 4-40 THREAD 2.225 [56.5] 1.250 [31.8] (2) PLS 2.402 [61.0] .551 [14.0] CAT. NO. 9202 CAT. NO. 9206 EISA/ISA with TABS EISA/ISA with TABS 'Y' DATUM 'Y' DATUM '0 - 0' '0 - 0' 'X' DATUM 'X' DATUM 3.453 [87.7] '0 - 0' '0 - 0' 4-40 THREAD 4-40 THREAD (2) PLS (2) PLS 3.500 [88.9] CAT. NO. 9205 CAT. NO. 9207 CAT. NO. 9208 LOW PROFILE with TABS PCI with TAB 'Y' DATUM 'Y' DATUM '0 - 0' '0 - 0' 'X' DATUM 'X' DATUM '0 - 0' '0 - 0' 4-40 THREAD 4-40 THREAD .250 [6.4] (2) PLS 2.122 [53.9] .190 [4.9] CAT. NO. 9231 CAT. NO. 9204 NOTE: Refer to pages 114 and 115 for overall blank dimensions If you do not have your own drawing, please use the worksheet provided. STEP 1: Select a standard blank configuration PCI or EISA/ISA, with or Name: Title: without tabs. STEP 2: If you’ve selected a standard blank with tabs and the tab Company: locations do not meet your requirements, indicate the dimensions in the boxes. Address: STEP 3: Place your standard panel cutouts (Ex: DB9) on your selected drawing. STEP 4: Use Datum’s X and Y on drawing, to indicate the precise location of the center lines of the cutout(s). Phone: Fax: STEP 5: For stamped identification markings indicate the approximate location(s). For prompt quotations fax, mail or e-mail this worksheet. STEP 6: Quantities Required: If you have any questions, please contact our application engineers. 122 Tel (718) 956-8900• Fax (718) 956-9040 www.keyelco.com (800) 221-5510 • kec@keyelco.com 31-07 20th Road – Astoria, NY 11105-2017 RoHS COMPLIANT~ ISO 9001 CERTIFIED CUSTOM BRACKET WORKSHEET
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the 9201?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods