3.0x2.2mm SINGLE COLOR SURFACE MOUNT LED LAMP Part Number: AA3022YC-4.5SF Yellow Features Description z 3.0mm x 2.2mm SMT LED, 1.5mm thickness. The Yellow source color devices are made with Gallium z White reflector to maximize reflection of light. Arsenide Phosphide on Gallium Phosphide Yellow Light z Ultra-compact type assures space saving. Emitting Diode. z High efficiency & low power consumption. z Package : 1500pcs / reel. z Moisture sensitivity level : level 4. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1226 REV NO: V.5 DATE: JUN/19/2010 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1201004480 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 AA3022YC-4.5SF Yellow (GaAsP/GaP) WATER CLEAR 4 15 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Yellow 590 nm IF=20mA λD [1] Dominant Wavelength Yellow 588 nm IF=20mA Δλ1/2 Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1226 REV NO: V.5 DATE: JUN/19/2010 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1201004480 Yellow AA3022YC-4.5SF SPEC NO: DSAD1226 REV NO: V.5 DATE: JUN/19/2010 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1201004480 AA3022YC-4.5SF Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern Reel Dimension (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAD1226 REV NO: V.5 DATE: JUN/19/2010 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1201004480 PACKING & LABEL SPECIFICATIONS AA3022YC-4.5SF SPEC NO: DSAD1226 REV NO: V.5 DATE: JUN/19/2010 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1201004480