4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Part Number: AA4040RWC/Z WHITE PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS Description FOR HANDLING ELECTROSTATIC The source color devices are made with InGaN Light DISCHARGE SENSITIVE Emitting Diode. DEVICES Static electricity and surge damage the LEDS. Features It is recommended to use a wrist band or anti-electrostatic zSingle color. glove when handling the LEDs. zSuitable for all SMT assembly and solder process. All devices, equipment and machinery must be electrically zAvailable on tape and reel. grounded. zIdeal for backlighting. Applications zPackage : 500pcs / reel. z traffic signaling. zMoisture sensitivity level : level 4. z backlighting (illuminated advertising , general lighting). zElectrostatic discharge threshold (HBM):1000V. z interior and exterior automotive lighting. z Typ. color temperature:6500K z substitution of micro incandescent lamps. zColor coordinates:x=0.31,y=0.31 acc. to z reading lamps. CIE 1931(white). z signal and symbol luminaire for orientation. z Optical efficiency:43.4 lm/ W(typ.) z marker lights (e.g. steps, exit ways, etc). z Color reproduction index:80. z decorative and entertainment lighting. zRoHS compliant. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH1109 REV NO: V.5 DATE: AUG/15/2008 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003032 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. SPEC NO: DSAH1109 REV NO: V.5 DATE: AUG/15/2008 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003032 Selection Guide Note2 Note3 Viewing luminous Intensity Φv (mlm) Note1 Iv(mcd) @ 20mA @ 20mA Angle Part No. Dice Lens Type Min. Typ. Typ. 2θ1/2 AA4040RWC/Z WHITE (InGaN) WATER CLEAR 480 1200 2780 120° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 111 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF 30 mA Note4 IFM 100 mA Peak Forward Current Thermal resistance Note5 Rth JA 300 °C/W Junction/ambient Rth JS 160 °C/W Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 2 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 Note1 0.31 - X IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 Note1 0.31 - Y IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] 2.7 Note2 Forward Voltage IF=20mA [Typ.] 3.2 V VF Forward Voltage IF=20mA [Max.] 3.7 Reverse Current (VR=5V) [Typ.] 0.01 IR μA Reverse Current (VR=5V) [Max.] 10 Temperature coefficient of x -3 TC x -0.1 10 /°C IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of y -3 TCy -0.2 10 /°C IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of VF TCV -2.5 mV/°C IF=20mA, -10°C≤ T≤100°C [Typ.] Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH1109 REV NO: V.5 DATE: AUG/15/2008 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003032 Brightness codes Note1 Note2 luminous Intensity Φv (mlm) Iv(mcd) @ 20mA @ 20mA Code. Min. Max. Typ. S 480 750 2650 T 650 1100 2700 U 900 1500 2810 V 1200 1800 2900 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White AA4040RWC/Z SPEC NO: DSAH1109 REV NO: V.5 DATE: AUG/15/2008 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003032 AA4040RWC/Z SPEC NO: DSAH1109 REV NO: V.5 DATE: AUG/15/2008 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003032 Color Codes AA4040RWC/Z White CIE 0.40 c0 0.35 b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x Rank a2 Rank a0 X 0.263 0.282 0.265 0.242 X 0.282 0.298 0.286 0.265 Y 0.213 0.245 0.265 0.226 Y 0.245 0.271 0.299 0.265 Rank b2 Rank b1 X 0.298 0.313 0.306 0.286 X 0.313 0.329 0.329 0.306 Y 0.271 0.296 0.332 0.299 Y 0.296 0.325 0.371 0.332 Rank c0 X 0.329 0.358 0.363 0.329 Y 0.325 0.372 0.400 0.371 SPEC NO: DSAH1109 REV NO: V.5 DATE: AUG/15/2008 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003032 y AA4040RWC/Z Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications Reel Dimension (Units : mm) SPEC NO: DSAH1109 REV NO: V.5 DATE: AUG/15/2008 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003032 PACKING & LABEL SPECIFICATIONS AA4040RWC/Z SPEC NO: DSAH1109 REV NO: V.5 DATE: AUG/15/2008 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201003032