5.0X6.0mm SURFACE MOUNT LED LAMP AA5060PWC/G WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features The source color devices are made with InGaN on SiC Light
SINGLE COLOR. Emitting Diode.
SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER Static electricity and surge damage the LEDS. PROCESS. It is recommended to use a wrist band or
AVAILABLE ON TAPE AND REEL. anti-electrostatic glove when handling the LEDs.
IDEAL FOR BACKLIGHTING. All devices, equipment and machinery must be electrically
PACKAGE : 500PCS / REEL. grounded.
LEAD AND CADMIUM FREE. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0904 REV NO: V.3 DATE: AUG/03/2004 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG Selection Guide Iv (mcd) V i e w i n g @ 30mA Angle Part No. Dice Lens Type Min. Typ. 2θθ θ θ1/2 AA5060PWC/G WHITE (InGaN) WATER CLEAR 380 800 100° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions VF Forward Voltage White 3.6 4.3 V IF=20mA IR Reverse Current White 10 uA VR = 5V X 0.33 Chromaticity Coordinates White Y 0.34 C Capacitance White 110 pF VF=0V;f=1MHz Absolute Maximum Ratings at TA=25°C Parameter White Units Power dissipation 129 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0904 REV NO: V.3 DATE: AUG/03/2004 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG White AA5060PWC/G SPEC NO: DSAD0904 REV NO: V.3 DATE: AUG/03/2004 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG AA5060PWC/G SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD0904 REV NO: V.3 DATE: AUG/03/2004 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG