5.0mm x 6.0mm FULL COLOR SURFACE MOUNT LED LAMP ATTENTION AAA5060SURVGPBE HYPER RED OBSERVE PRECAUTIONS GREEN FOR HANDLING BLUE ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features The Hyper Red source color devices are made with DH
CHIPS CAN BE CONTROLLED SEPARATELY. InGaAlP on GaAs substrate Light Emitting Diode.
SUITABLE FOR ALL SMT ASSEMBLY AND The Green source color devices are made with InGaN on SOLDER PROCESS. SiC Light Emitting Diode.
AVAILABLE ON TAPE AND REEL. The Blue source color devices are made with InGaN on SiC
PACKAGE: 500PCS / REEL. Light Emitting Diode.
RoHS COMPLIANT. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0908 REV NO: V.3 DATE: MAR/24/2005 PAGE: 1 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000788 Selection Guide Iv (mcd) V i e w i n g @30mA* 50 mA Angle Part No. Dice Lens Type Min. Typ. 2 θθ θ θ 1/2 HYPER RED (InGaAIP) *380 *500 AAA5060SURVGPBE GREEN (InGaN) 180 350 100° WATER CLEAR BLUE (InGaN) 110 250 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Hyper Red 640 λpeak Peak Wavelength Green 520 nm I =20mA F Blue 465 Hyper Red 628 Dominant Wavelength nm I =20mA λD Green 525 F Blue 470 Hyper Red 27 Spectral Line Half-width Green 38 nm I =20mA Δλ1/2 F Blue 25 Hyper Red 45 C Capacitance Green 45 pF V =0V;f=1MHz F Blue 110 Hyper Red 1.9 2.5 V Forward Voltage Green 3.5 4.5 V I =20mA F F Blue 3.7 4.3 I Reverse Current All 10 uA V = 5V R R Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation [2] 350 mW DC Forward Current 50 30 30 mA Peak Forward Current [1] 185 150 160 mA Reverse Voltage 5 5 5 V Operating / Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Within 350mW at all chips are lightened. SPEC NO: DSAD0908 REV NO: V.3 DATE: MAR/24/2005 PAGE: 2 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000788 AAA5060SURVGPBE Hyper Red SPEC NO: DSAD0908 REV NO: V.3 DATE: MAR/24/2005 PAGE: 3 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000788 Green SPEC NO: DSAD0908 REV NO: V.3 DATE: MAR/24/2005 PAGE: 4 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000788 Blue SPEC NO: DSAD0908 REV NO: V.3 DATE: MAR/24/2005 PAGE: 5 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000788 AAA5060SURVGPBE Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD0908 REV NO: V.3 DATE: MAR/24/2005 PAGE: 6 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000788