3.5X2.8mm SURFACE MOUNT SMD CHIP LED Part Number: AAAF3528QBFSEJ3ZGW ATTENTION Blue OBSERVE PRECAUTIONS Hyper Red FOR HANDLING Green ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Outstanding material efficiency. The Blue source color devices are made with InGaN Light z Low power consumption. Emitting Diode. z Can produce any color in visible spectrum, including white light. The Hyper Red device is based on light emitting diode chip z Suitable for all SMT assembly and solder process. made from AlGaInP. z Available on tape and reel. The Green source color devices are made with InGaN z Package: 1500pcs / reel . on Sapphire Light Emitting Diode. z Moisture sensitivity level : level 4. Static electricity and surge damage the LEDS. z RoHS compliant. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI9804 REV NO: V.6A DATE: DEC/24/2011 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201004515 Selection Guide Iv (mcd) [2] Viewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 120 250 Blue (InGaN) *120 *250 900 1700 AAAF3528QBFSEJ3ZGW Hyper Red (AlGaInP) White Diffused 120° *300 *550 480 900 Green (InGaN) *400 *550 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Blue 461 *460 λpeak Peak Wavelength Hyper Red 640 *640 nm IF=20mA Green 515 *515 Blue 465 *465 λD [1] Dominant Wavelength Hyper Red 625 *625 nm IF=20mA Green 525 *525 Blue 25 Δλ1/2 Spectral Line Half-width Hyper Red 25 nm IF=20mA Green 30 Blue 100 C Capacitance Hyper Red 27 pF VF=0V;f=1MHz Green 45 Blue 3.3 4 VF [2] Forward Voltage Hyper Red 2.2 2.8 V IF=20mA Green 3.3 4.1 Blue 50 IR Reverse Current Hyper Red 10 uA VR=5V Green 50 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. *Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Red Green Units Power dissipation 120 140 123 mW DC Forward Current 30 50 30 mA Peak Forward Current [1] 150 150 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAI9804 REV NO: V.6A DATE: DEC/24/2011 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201004515 AAAF3528QBFSEJ3ZGW Blue SPEC NO: DSAI9804 REV NO: V.6A DATE: DEC/24/2011 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201004515 Hyper Red SPEC NO: DSAI9804 REV NO: V.6A DATE: DEC/24/2011 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201004515 Green SPEC NO: DSAI9804 REV NO: V.6A DATE: DEC/24/2011 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201004515 AAAF3528QBFSEJ3ZGW Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern Reel Dimension (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAI9804 REV NO: V.6A DATE: DEC/24/2011 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201004515 PACKING & LABEL SPECIFICATIONS AAAF3528QBFSEJ3ZGW SPEC NO: DSAI9804 REV NO: V.6A DATE: DEC/24/2011 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201004515