3.5X2.8mm SURFACE MOUNT SMD CHIP LED Part Number: AAAF3528QBFSEJZGW PRELIMINARY SPEC ATTENTION Blue OBSERVE PRECAUTIONS Hyper Orange FOR HANDLING Green ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z OUTSTANDING MATERIAL EFFICIENCY. The Blue source color devices are made with AlInGaN on z LOW POWER CONSUMPTION. Al2O3 substrate Light Emitting Diode. z CAN PRODUCE ANY COLOR IN VISIBLE The Super Bright device is based on light emitting diode SPECTRUM, INCLUDING WHITE LIGHT. chip made from AlInGaP. z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER The Green source color devices are made with AlInGaN PROCESS. on Sapphire Light Emitting Diode. z AVAILABLE ON TAPE AND REEL. Static electricity and surge damage the LEDS. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. It is recommended to use a wrist band or anti-electrostatic z RoHS COMPLIANT. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH1813 REV NO: V.3 DATE: JAN/31/2008 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: K.Xia ERP: 1201003074 Selection Guide Iv (mcd) [2] V iewing @ 20mA Angle [1] Part No. Dice Lens Type Min. Typ. 2θ1/2 Blue (AlInGaN) 110 250 AAAF3528QBFSEJZGW WHITE DIFFUSED Hyper Orange (AlInGaP) 900 1700 120° Green (AlInGaN) 480 900 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Blue 461 λpeak Peak Wavelength Hyper Orange 640 nm IF=20mA Green 515 Blue 465 λD [1] Dominant Wavelength Hyper Orange 630 nm IF=20mA Green 525 Blue 25 Δλ1/2 Spectral Line Half-width Hyper Orange 25 nm IF=20mA Green 30 Blue 100 C Capacitance Hyper Orange 27 pF VF=0V;f=1MHz Green 45 Blue 3.3 4 VF [2] Forward Voltage Hyper Orange 2.2 2.8 V IF=20mA Green 3.3 4.1 Blue 10 IR Reverse Current Hyper Orange 10 uA VR=5V Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Orange Green Units Power dissipation 120 140 123 mW DC Forward Current 30 50 30 mA Peak Forward Current [1] 150 150 150 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH1813 REV NO: V.3 DATE: JAN/31/2008 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: K.Xia ERP: 1201003074 AAAF3528QBFSEJZGW Blue SPEC NO: DSAH1813 REV NO: V.3 DATE: JAN/31/2008 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: K.Xia ERP: 1201003074 Hyper Orange SPEC NO: DSAH1813 REV NO: V.3 DATE: JAN/31/2008 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: K.Xia ERP: 1201003074 Green SPEC NO: DSAH1813 REV NO: V.3 DATE: JAN/31/2008 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: K.Xia ERP: 1201003074 AAAF3528QBFSEJZGW Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH1813 REV NO: V.3 DATE: JAN/31/2008 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: K.Xia ERP: 1201003074 PACKING & LABEL SPECIFICATIONS AAAF3528QBFSEJZGW SPEC NO: DSAH1813 REV NO: V.3 DATE: JAN/31/2008 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: K.Xia ERP: 1201003074