5.0mm x 5.0mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: AAAF5051-03 Blue ATTENTION Reddish-Orange OBSERVE PRECAUTIONS Green FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Chips can be controlled separately. The Blue source color devices are made with InGaN z Suitable for all SMT assembly and solder process. on Al2O3 substrate Light Emitting Diode. z Available on tape and reel. This devices are made with AlGaInP. z White SMD package, silicone resin. The Green source color devices are made with InGaN z Package: 500pcs / reel. on Al2O3 substrate Light Emitting Diode. z Moisture sensitivity level : level 3. Static electricity and surge damage the LEDS. z RoHS compliant. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15[±0.006]unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 1 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diame- ter of the nozzle should be as large as possible. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H S might corrode silver plating of 2 leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 2 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 Selection Guide Iv (mcd) [2] Φv (mlm) [2] Viewing @ 150mA*120mA @ 150mA*120mA Angle [1] Part No. Dice Lens Type Min. Typ. Min. Typ. 2θ1/2 Blue (InGaN) 700 1300 3500 5000 AAAF5051-03 WATER CLEAR Reddish-Orange (AlGaInP) *7500 *9600 *7200 *10000 120° Green (InGaN) 4700 6500 14000 20000 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity with asterisk is measured at 120mA. Absolute Maximum Ratings at Ta=25°C Parameter Symbol Device Value Unit Test Conditions Blue 0.6 IF=150mA Power dissipation PD Reddish-Orange 0.336 W IF=120mA IF=150mA Green 0.6 Blue 140 IF=150mA Junction temperature TJ Reddish-Orange 140 °C IF=120mA IF=150mA Green 140 Blue IF=150mA Operating Temperature Top Reddish-Orange -40 To +85 °C IF=120mA IF=150mA Green Blue IF=150mA Storage Temperature Tstg Reddish-Orange -40 To +85 °C IF=120mA IF=150mA Green Blue 150 IF=150mA DC Forward Current [1] IF Reddish-Orange 120 mA IF=120mA IF=150mA Green 150 Blue 300 IF=150mA Peak Forward Current [2] IFM Reddish-Orange 300 mA IF=120mA IF=150mA Green 300 Blue 230 IF=150mA Thermal resistance Rth j-a Reddish-Orange 300 °C/W IF=120mA IF=150mA Green 220 Blue 30 IF=150mA Thermal resistance Rth j-s Reddish-Orange 50 °C/W IF=120mA IF=150mA Green 35 Blue 10 Reddish-Orange 10 Reverse Current IR uA VR=5V 10 Green Notes: 1. Results from mounting on Aluminum Board. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 3 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 Electrical / Optical Characteristics at Ta=25°C Value Parameter Symbol Device Unit Min. Typ. Max. Wavelength at peak emission Blue 445 IF=150mA Wavelength at peak emission Reddish-Orange 633 nm λ peak IF=120mA Wavelength at peak emission Green 515 IF=150mA Dominant Wavelength Blue 450 IF=150mA Dominant Wavelength Reddish-Orange 624 nm λ dom [1] IF=120mA Dominant Wavelength Green 525 IF=150mA Spectral Line Half-width Blue 20 IF=150mA Spectral Line Half-width Δλ1/2 Reddish-Orange 30 nm IF=120mA Spectral Line Half-width Green 30 IF=150mA Forward Voltage IF=150mA Blue 3.0 3.5 4.0 Forward Voltage IF=120mA VF [2] Reddish-Orange 2.0 2.3 2.8 V Forward Voltage IF=150mA Green 3.0 3.5 4.0 Blue 5 Reverse Voltage VR Reddish-Orange 5 V Green 5 Temperature coefficient of λ peak Blue 0.12 IF=150mA, -10° C≤ T≤100° C Temperature coefficient of λ peak TCλ peak Reddish-Orange 0.09 nm/° C IF=120mA, -10° C≤ T≤100° C Temperature coefficient of λ peak Green 0.13 IF=150mA, -10° C≤ T≤100° C Temperature coefficient of λ dom Blue 0.1 IF=150mA, -10° C≤ T≤100° C Temperature coefficient of λ dom TCλ dom Reddish-Orange 0.03 nm/° C IF=120mA, -10° C≤ T≤100° C Temperature coefficient of λ dom Green 0.11 IF=150mA, -10° C≤ T≤100° C Temperature coefficient of VF Blue -2.3 IF=150mA, -10° C≤ T≤100° C Temperature coefficient of VF TCV Reddish-Orange -2.7 mV/° C IF=120mA, -10° C≤ T≤100° C Temperature coefficient of VF Green -3.9 IF=150mA, -10° C≤ T≤100° C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.2V. SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 4 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 AAAF5051-03 Blue SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 5 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 Reddish-orange SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 6 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 Green SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 7 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 AAAF5051-03 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Reel Dimension Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 8 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942 PACKING & LABEL SPECIFICATIONS AAAF5051-03 SPEC NO: DSAK2496 REV NO: V.5 DATE: APR/12/2011 PAGE: 9 OF 9 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005942